Skip to content

The Hard–Soft Acid–Base (HSAB) Concept

CSIR NET chemistry: Pearson's HSAB principle, class a/b metals, hard and soft lists, symbiosis, absolute hardness (I − A)/2 and the Drago–Wayland equation.

  • 17 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Why Mercury Is Mined as a Sulfide
  3. From Class (a) and (b) to Hard and Soft
  4. The Principle
  5. Applications
  6. The Theory Behind HSAB
  7. Limitations of HSAB
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Why Mercury Is Mined as a Sulfide

From Class (a) and (b) to Hard and Soft

Before Pearson, Ahrland, Chatt and Davies sorted metal ions by the stability of their complexes with donor atoms of different groups:

ClassHalide stability orderDonor group preferenceTypical ions
(a)F⁻ > Cl⁻ > Br⁻ > I⁻N ≫ P > As; O ≫ S > SeH⁺, alkali, alkaline-earth, Al³⁺, Ln³⁺, high-oxidation-state d-block ions
(b)F⁻ < Cl⁻ < Br⁻ < I⁻N ≪ P > As; O ≪ S ≈ SeCu⁺, Ag⁺, Au⁺, Hg²⁺, Pd²⁺, Pt²⁺, low-oxidation-state metals

Pearson (1963) extended this beyond metal ions to all Lewis acids and bases and renamed class (a) hard and class (b) soft.

The Principle

What makes a species hard or soft

HardSoft
Acidssmall; high positive charge (or high oxidation state); low polarisability; no easily distorted outer electronslarge; low positive charge (or zero); high polarisability; often many d electrons (d¹⁰, low-spin d⁸)
Basesdonor atom of high electronegativity; small; low polarisability; hard to oxidisedonor atom of low electronegativity; large; highly polarisable; easily oxidised; often has empty low-lying orbitals (π-acceptor)
Bond charactermainly electrostatic (ionic)mainly covalent
Frontier orbitalslarge HOMO–LUMO gapsmall HOMO–LUMO gap

The lists

HardBorderlineSoft
AcidsH⁺, Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺, Al³⁺, Ga³⁺, In³⁺, Sc³⁺, Ln³⁺, Cr³⁺, Co³⁺, Fe³⁺, Ti⁴⁺, Zr⁴⁺, Si⁴⁺, Sn⁴⁺, BF₃, BCl₃, AlCl₃, Al(CH₃)₃, SO₃, CO₂, RCO⁺Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Sn²⁺, Sb³⁺, Bi³⁺, B(CH₃)₃, SO₂, NO⁺, R₃C⁺Cu⁺, Ag⁺, Au⁺, Tl⁺, Hg₂²⁺, Hg²⁺, Cd²⁺, Pd²⁺, Pt²⁺, Pt⁴⁺, Tl³⁺, CH₃Hg⁺, BH₃, I₂, Br₂, I⁺, Br⁺, metal atoms M(0), carbenes
BasesF⁻, OH⁻, H₂O, O²⁻, ROH, RO⁻, R₂O, CH₃COO⁻, CO₃²⁻, NO₃⁻, PO₄³⁻, SO₄²⁻, ClO₄⁻, NH₃, RNH₂, N₂H₄, Cl⁻Br⁻, N₃⁻, NO₂⁻, SO₃²⁻, N₂, C₆H₅NH₂, pyridineI⁻, H⁻, R⁻, CN⁻, CO, SCN⁻ (S end), RNC, R₃P, (RO)₃P, R₃As, R₂S, RSH, RS⁻, S₂O₃²⁻, C₂H₄, C₆H₆

Cl⁻ sits on the hard/borderline boundary (tables differ on whether to list it as hard or borderline), and it is clearly softer than F⁻. Placing a species near a boundary (Cl⁻, Br⁻, Zn²⁺, Cu²⁺) is a matter of convention; exam questions use only the clear cases.

What shifts a species along the scale

  1. Oxidation state. Raising the positive charge hardens an acid: Cu⁺ soft, Cu²⁺ borderline; Fe²⁺ borderline, Fe³⁺ hard; Sn²⁺ borderline, Sn⁴⁺ hard; Tl⁺ soft, but Tl³⁺ is also classed soft, a known exception usually linked to its polarisable 5d¹⁰ configuration.
  2. Substituents (symbiosis). Soft ligands already on an acid make it softer; hard ligands make it harder. BF₃ is hard but BH₃ is soft. The three hydrides make boron prefer soft bases: BH₃ forms H₃B–CO and H₃B–PR₃, while BF₃ forms no stable carbonyl. This tendency of like ligands to cluster is called symbiosis (Jørgensen).
  3. Donor atom within a base. Softness of the donor atom falls as its electronegativity rises: I > Br > Cl > F; Te > Se > S > O; As ≈ P > N.

Applications

1. Predicting exchange (metathesis) reactions

In a double exchange, the products pair hard with hard and soft with soft.

$$\text{LiI} + \text{CsF} \rightarrow \text{LiF} + \text{CsI}$$

Li⁺ (hard, small) pairs with F⁻ (hard), and Cs⁺ (softest of the alkali ions) pairs with I⁻ (soft). The reaction is exothermic.

$$\text{HgF}_2 + \text{BeI}_2 \rightarrow \text{BeF}_2 + \text{HgI}_2$$

Be²⁺ is hard, Hg²⁺ soft; the products are hard–hard and soft–soft.

$$\text{CH}_3\text{HgF} + \text{HSO}_3^- \rightarrow \text{CH}_3\text{HgSO}_3^- + \text{HF}$$

CH₃Hg⁺ is soft and takes the softer base (sulfite through S); H⁺ is hard and takes F⁻.

2. Stability of complexes and solubility

  • Hard metal ions form their most stable halide complexes with F⁻; soft ones with I⁻. Hg²⁺ forms [HgI₄]²⁻ readily; Al³⁺ and Fe³⁺ form [AlF₆]³⁻ and [FeF₆]³⁻.
  • AgF is very soluble in water while AgCl, AgBr and AgI become progressively less soluble: Ag⁺ (soft) binds the softer halides more covalently. The opposite trend holds for lithium, where LiF is the least soluble halide.
  • Soft metals bind CO, phosphines and alkenes: metal carbonyls and Zeise’s salt involve low-oxidation-state, soft metals.

3. Geochemistry

The hook above is Goldschmidt’s classification in HSAB language: hard metals are lithophile (found with oxygen as oxides, silicates and carbonates, or with fluoride), soft and borderline metals are chalcophile (found as sulfides).

4. Biology and toxicology

ObservationHSAB reading
Hg²⁺, Cd²⁺, Pb²⁺ inhibit enzymessoft acids bind soft thiolate (cysteine) sulfur
Dimercaprol (BAL, a dithiol) treats Hg and As poisoningsoft S donors capture soft acids
Cd²⁺ can displace Zn²⁺ from sulfur-rich sitesCd²⁺ is softer than Zn²⁺ and binds S more strongly
Hard Mg²⁺ and Ca²⁺ bind phosphate and carboxylate oxygenhard–hard
Sulfur compounds poison Pt and Pd catalystssoft S binds the soft metal surface

5. Organic reactions

  • Ambident nucleophiles: cyanide with an alkyl halide gives mainly the nitrile with KCN (attack through C), but mainly the isonitrile with AgCN, where the soft Ag⁺ holds the carbon end and pulls the halide off, leaving N to attack a more carbocation-like centre.
  • Conjugate addition: soft organocuprates (R₂CuLi) add 1,4 to α,β-unsaturated carbonyls (soft β-carbon); hard organolithiums add 1,2 at the carbonyl carbon (hard, charge-controlled site).

These are the textbook HSAB explanations and the ones exam options use. Later kinetic studies have questioned whether hardness and softness really cause ambident selectivity, so treat them as a rule of thumb rather than a proven mechanism.

The Theory Behind HSAB

Charge control and orbital control (Klopman)

In a perturbation-theory treatment the interaction energy of an acid and a base has two main terms:

  • an electrostatic (charge) term, large when both partners are small and highly charged: hard–hard;
  • a covalent (frontier-orbital) term, large when the donor HOMO and acceptor LUMO are close in energy: soft–soft.

Hard–hard interactions are charge-controlled; soft–soft interactions are orbital-controlled.

Absolute hardness (Parr and Pearson)

For a chemical species with ionisation energy I and electron affinity A:

$$\boxed{\eta = \frac{I - A}{2}} \qquad \boxed{\chi = \frac{I + A}{2}} \qquad \sigma = \frac{1}{\eta}$$

η is the absolute hardness, χ the Mulliken electronegativity (whose negative is the chemical potential μ), and σ the softness. In orbital terms, I ≈ −E(HOMO) and A ≈ −E(LUMO) (Koopmans’ theorem), so 2η is roughly the HOMO–LUMO gap: hard species have large gaps.

For a cation Mⁿ⁺, I is the next ionisation energy of the metal (Iₙ₊₁) and A is the energy released when the cation regains an electron, which equals Iₙ. So

$$\eta(\text{M}^{n+}) = \frac{I_{n+1} - I_n}{2}$$

Values from the same method, using ionisation energies in eV:

IonIₙIₙ₊₁η (eV)
Li⁺5.3975.6435.1
Na⁺5.1447.2921.1
K⁺4.3431.6313.6
Ag⁺7.5821.497.0
Cu⁺7.7320.296.3

For the halogen atoms (I and A of the atom, a common proxy for the donor end of the halide): F 7.0, Cl 4.7, Br 4.2, I 3.7 eV. The order matches the qualitative lists: F hardest, I softest.

Electron transfer between acid and base. When acid C and base B combine, the fraction of an electron that flows from B to C is estimated as

$$\Delta N = \frac{\chi_C - \chi_B}{2(\eta_C + \eta_B)}$$

A large electronegativity difference drives transfer; large hardness resists it. Two soft partners (small η) share electron density easily: that is the covalent bond the HSAB principle predicts.

The Drago–Wayland equation

Drago and Wayland gave a two-parameter equation for the enthalpy of adduct formation between a Lewis acid A and base B (in the gas phase or in poorly coordinating solvents):

$$\boxed{-\Delta H = E_A E_B + C_A C_B}$$

E measures each partner’s capacity for electrostatic bonding, C its capacity for covalent bonding. In the original parametrisation (kcal mol⁻¹), I₂ is the reference acid with \( E_A = C_A = 1.00 \).

What it shows: because every acid and base has two parameters, no single strength order exists. An acid with large E/C ratio (hard-like) ranks bases by E; an acid with small E/C (soft-like) ranks them by C. HSAB is the qualitative shadow of this equation.

Limits of the E and C equation: it gives enthalpies only (no entropy or solvation), and it works for neutral adducts in non-coordinating media, not for ions in water.

Limitations of HSAB

  1. Hardness is not strength. A very strong base can bind a “mismatched” acid strongly. H⁻ is a soft base and H⁺ the hardest acid, yet H⁺ + H⁻ → H₂ is extremely favourable. HSAB compares like with like; it does not override large differences in intrinsic strength.
  2. No unique quantitative scale. Absolute hardness, E and C parameters, and the qualitative lists do not always agree on order for borderline species.
  3. Solvation and entropy are not built in. Exchange predictions are safest for gas-phase or solid-state reactions.
  4. Borderline cases are conventional. Classifications near the boundary (Cl⁻, Zn²⁺, Cu²⁺) can be argued either way.

Memory Tricks

Don’t Confuse

ThisvsThat
Hardness (preference for a type of partner)strength (how strongly it binds any partner)
BF₃: hard (F substituents)BH₃: soft (H⁻ substituents)
Cu⁺: softCu²⁺: borderline
Fe³⁺: hardFe²⁺: borderline
Tl⁺: soft, Tl³⁺: also softSn²⁺ borderline, Sn⁴⁺ hard
η = (I − A)/2 (hardness)χ = (I + A)/2 (Mulliken electronegativity)
Class (a) halide order F > Cl > Br > Iclass (b) order I > Br > Cl > F
E and C: enthalpy of neutral adductsHSAB: qualitative, any reaction type

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Classify as hard, soft or borderline: Al³⁺, Pt²⁺, Fe²⁺, I⁻, F⁻, pyridine.
  2. Write the formula for absolute hardness in terms of I and A.
  3. Why is BH₃ softer than BF₃?
Answers
  1. Al³⁺ hard; Pt²⁺ soft; Fe²⁺ borderline; I⁻ soft; F⁻ hard; pyridine borderline.
  2. \( \eta = (I - A)/2 \).
  3. Symbiosis: soft hydride substituents make boron prefer soft bases; hard fluorides make it prefer hard bases.

Level 2: Part B Style

Practice Q1. Which reaction is expected to be exothermic, as written, on HSAB grounds?

(a) LiF + CsI → LiI + CsF (b) BeF₂ + HgI₂ → BeI₂ + HgF₂ (c) LiI + CsF → LiF + CsI (d) AgI + NaF → AgF + NaI

Answer: (c)

The favoured side pairs hard with hard (Li⁺/F⁻) and soft with soft (Cs⁺/I⁻ is the softer pair). Options (a) and (b) are reverses of favoured reactions; (d) moves soft Ag⁺ from soft I⁻ to hard F⁻.

Practice Q2. In which complex is thiocyanate most likely bound through sulfur?

(a) [Co(NH₃)₅(SCN)]²⁺ (b) [Co(CN)₅(SCN)]³⁻ (c) [Co(NCS)₄]²⁻ (d) [Cr(H₂O)₅(SCN)]²⁺

Answer: (b)

Five soft cyanides make the Co(III) centre soft (symbiosis), so it takes the soft S end. In (a) and (d) the hard ammine or aqua co-ligands and the hard M³⁺ centres favour N binding; in (c) Co(II) binds through N.

Practice Q3. The softest Lewis acid among the following is:

(a) Al³⁺ (b) Mg²⁺ (c) Cd²⁺ (d) Ca²⁺

Answer: (c) Cd²⁺

Cd²⁺ is a large, polarisable d¹⁰ ion (found in nature as CdS, greenockite). Al³⁺, Mg²⁺ and Ca²⁺ are hard, noble-gas-configured ions.

Practice Q4. Given the halogen atom data (eV): F, I = 17.42, A = 3.40; I (iodine), I = 10.45, A = 3.06. The absolute hardness values are:

(a) F 7.01, I 3.70 (b) F 10.41, I 6.76 (c) F 14.02, I 7.39 (d) F 3.70, I 7.01

Answer: (a)

\( \eta(\text{F}) = (17.42 - 3.40)/2 = 7.01 \) eV; \( \eta(\text{I}) = (10.45 - 3.06)/2 = 3.70 \) eV (3.695). Option (b) gives χ = (I + A)/2 instead; (c) forgets to halve.

Level 3: Part C Style

Practice Q5. Ionisation energies (eV): Li 5.39, 75.64; K 4.34, 31.63; Cu 7.73, 20.29; Ag 7.58, 21.49 (first, second). The correct order of absolute hardness of the monocations is:

(a) Li⁺ > K⁺ > Ag⁺ > Cu⁺ (b) Li⁺ > K⁺ > Cu⁺ > Ag⁺ (c) K⁺ > Li⁺ > Ag⁺ > Cu⁺ (d) Ag⁺ > Cu⁺ > K⁺ > Li⁺

Answer: (a)

For M⁺, \( \eta = (I_2 - I_1)/2 \):

  • Li⁺: (75.64 − 5.39)/2 = 35.13 eV
  • K⁺: (31.63 − 4.34)/2 = 13.65 eV
  • Ag⁺: (21.49 − 7.58)/2 = 6.96 eV
  • Cu⁺: (20.29 − 7.73)/2 = 6.28 eV

So Li⁺ > K⁺ > Ag⁺ > Cu⁺. Both coinage-metal ions are soft; by this measure Cu⁺ comes out slightly softer than Ag⁺, a reminder that absolute hardness values do not always match a simple “heavier is softer” rule.

Practice Q6. Hypothetical Drago–Wayland parameters: acid P, \( E_A = 5.0, C_A = 0.5 \); acid Q, \( E_A = 0.5, C_A = 3.0 \); base X, \( E_B = 1.5, C_B = 1.0 \); base Y, \( E_B = 0.5, C_B = 4.0 \). Which statements are correct?

  1. −ΔH for P–X is 8.0 units.
  2. Acid Q forms its more stable adduct with base X.
  3. The two acids rank the two bases in opposite orders.
  4. Acid P behaves like a hard acid and Y like a soft base.

(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 3 and 4 only

−ΔH = E_A E_B + C_A C_B:

  • P–X: 7.5 + 0.5 = 8.0; P–Y: 2.5 + 2.0 = 4.5. P prefers X.
  • Q–X: 0.75 + 3.0 = 3.75; Q–Y: 0.25 + 12.0 = 12.25. Q prefers Y.

Statement 2 is wrong (Q prefers Y). Statement 3 is right: the orders reverse. Statement 4 is right: P has a large E/C ratio (electrostatic, hard-like), Y a large C (covalent, soft-like).

Practice Q7. Consider the statements about HSAB:

  1. Hard–hard interactions are mainly charge-controlled; soft–soft interactions are mainly frontier-orbital-controlled.
  2. Because H⁻ is soft and H⁺ is hard, H⁺ + H⁻ → H₂ is unfavourable.
  3. Hg²⁺, Pb²⁺ and Cd²⁺ owe much of their toxicity to binding thiolate sulfur in proteins.
  4. In the reaction CH₃HgF + HSO₃⁻ → CH₃HgSO₃⁻ + HF, the soft acid ends up on the softer base.

Which are correct?

(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 3 and 4 only

Statement 2 confuses hardness with strength: H⁻ is a very strong base and the reaction is strongly favourable. Statement 1 is Klopman’s analysis; 3 is the standard toxicology reading; 4 is a metathesis in which CH₃Hg⁺ (soft) takes the sulfur donor and H⁺ (hard) takes F⁻.

Quick Revision Table

IdeaFact
Principlehard prefers hard, soft prefers soft (thermodynamics and kinetics)
Originclass (a)/(b) of Ahrland, Chatt and Davies; renamed by Pearson (1963)
Hard acidsH⁺, alkali, alkaline-earth, Al³⁺, Fe³⁺, Cr³⁺, Co³⁺, Ln³⁺, Ti⁴⁺, BF₃, AlCl₃, SO₃, CO₂
Soft acidsCu⁺, Ag⁺, Au⁺, Hg²⁺, Cd²⁺, Pd²⁺, Pt²⁺, Tl⁺, Tl³⁺, BH₃, I₂, M(0)
Borderline acidsFe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Sn²⁺, SO₂, B(CH₃)₃, NO⁺
Hard basesF⁻, OH⁻, H₂O, O²⁻, RO⁻, NH₃, carboxylate, oxoanions, Cl⁻
Soft basesI⁻, H⁻, R⁻, CN⁻, CO, R₃P, R₂S, RS⁻, SCN⁻ (S), S₂O₃²⁻, C₂H₄
Borderline basesBr⁻, N₃⁻, NO₂⁻, SO₃²⁻, pyridine, aniline, N₂
SymbiosisBH₃ soft vs BF₃ hard; [Co(CN)₅(SCN)]³⁻ S-bound vs [Co(NH₃)₅(NCS)]²⁺ N-bound
Absolute hardnessη = (I − A)/2; for Mⁿ⁺: (Iₙ₊₁ − Iₙ)/2; Li⁺ 35.1, Na⁺ 21.1, Ag⁺ 7.0 eV
Electron transferΔN = (χ_C − χ_B)/[2(η_C + η_B)]
Drago–Wayland−ΔH = E_A E_B + C_A C_B; I₂ reference E = C = 1
Limitshardness ≠ strength; no unique scale; solvation ignored

Key Takeaways

What’s Next