Skip to content

Non-aqueous Solvents: Liquid NH₃, HF, H₂SO₄, BrF₃, N₂O₄ and Superacids

CSIR NET chemistry: solvent classification, levelling and differentiating solvents, liquid NH₃, HF, H₂SO₄ cryoscopy, BrF₃, N₂O₄, SO₂ and superacids.

  • 19 min read
  • Updated
On this page · 20 sections
  1. Prerequisites
  2. The Hook: Titrating a Base That Water Cannot See
  3. Why Leave Water?
  4. Properties That Make a Good Ionising Solvent
  5. Classification
  6. Levelling and Differentiating Solvents
  7. Liquid Ammonia
  8. Anhydrous Hydrogen Fluoride
  9. Sulfuric Acid
  10. Bromine Trifluoride
  11. Dinitrogen Tetroxide
  12. Liquid Sulfur Dioxide: A Cautionary Example
  13. Superacids and Hammett Acidity
  14. Memory Tricks
  15. Don’t Confuse
  16. Common Mistakes
  17. Practice
  18. Quick Revision Table
  19. Key Takeaways
  20. What’s Next

Prerequisites

The Hook: Titrating a Base That Water Cannot See

Why Leave Water?

Water is cheap, safe, an excellent solvent for salts, and amphiprotic, but it limits chemistry in three ways:

  1. The acid–base window is fixed. Nothing stronger than H₃O⁺ or OH⁻ survives in water.
  2. The redox window is fixed. Strong reductants (alkali metals) reduce water to H₂; strong oxidants (F₂) oxidise it to O₂.
  3. Water reacts with many substances (hydrolysis of SiCl₄, PCl₅, metal hydrides, many halides and carbanions).

A non-aqueous solvent shifts or widens these windows.

Properties That Make a Good Ionising Solvent

PropertyWhy it matters
Dielectric constant (relative permittivity, ε)high ε reduces the attraction between dissolved ions (Coulomb force ∝ 1/ε), so salts dissociate
Dipole moment and donor abilitysolvates cations (donor solvents: NH₃, DMSO, H₂O) or anions (acceptor solvents: HF, H₂O)
Self-ionisationprovides the characteristic cation and anion for the solvent-system definition
Liquid rangemust be liquid where you want to work (NH₃ only below about −33 °C at 1 atm)
Viscosityhigh viscosity (H₂SO₄) slows ion mobility and makes handling harder

Donor number (Gutmann) measures a solvent’s Lewis basicity: the negative enthalpy of its 1:1 adduct with SbCl₅ in 1,2-dichloroethane. Acceptor number measures Lewis acidity, from the ³¹P NMR shift of triethylphosphine oxide in the solvent. Strongly donating solvents (DMSO, pyridine) solvate cations well; strongly accepting solvents (water, HF, alcohols) solvate anions well.

Classification

graph TD
    S[Solvents] --> P[Protic: contain an ionisable H]
    S --> A[Aprotic: no ionisable H]
    P --> P1[Acidic, protogenic: H2SO4, HF, CH3COOH, HCOOH]
    P --> P2[Basic, protophilic: NH3, N2H4, amines]
    P --> P3[Amphiprotic: H2O, alcohols]
    A --> A1[Non-polar, inert: CCl4, C6H6, hexane]
    A --> A2[Dipolar aprotic, coordinating: DMSO, DMF, CH3CN, acetone]
    A --> A3[Self-ionising, often fluorinating: BrF3, N2O4, SbCl3]
SolventMelting point (°C)Boiling point (°C)ε (approx.)Self-ionisation
H₂O010078 (25 °C)2H₂O ⇌ H₃O⁺ + OH⁻
NH₃about −78about −33about 22 (at bp)2NH₃ ⇌ NH₄⁺ + NH₂⁻
HFabout −84about 19.5about 84 (0 °C)3HF ⇌ H₂F⁺ + HF₂⁻
H₂SO₄about 10.4decomposes near 300about 1002H₂SO₄ ⇌ H₃SO₄⁺ + HSO₄⁻
CH₃COOHabout 16.6about 118about 62CH₃COOH ⇌ CH₃COOH₂⁺ + CH₃COO⁻
BrF₃about 9about 126not needed2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻
N₂O₄about −11about 21about 2.4N₂O₄ ⇌ NO⁺ + NO₃⁻

Learn the self-ionisation equations exactly; the physical constants are for orientation (sources differ slightly).

Levelling and Differentiating Solvents

SolventStrongest acid possibleStrongest base possibleEffect
H₂OH₃O⁺OH⁻HCl, HBr, HI, HNO₃, HClO₄ all levelled to H₃O⁺
NH₃ (l)NH₄⁺NH₂⁻acetic acid and other weak aqueous acids become strong; strong bases differentiated
CH₃COOHCH₃COOH₂⁺CH₃COO⁻strong mineral acids differentiated; bases levelled to acetate-strength
H₂SO₄H₃SO₄⁺HSO₄⁻almost every base levelled; HNO₃, H₂O, CH₃COOH behave as bases
  • A basic solvent (NH₃, pyridine, ethylenediamine) levels acids and differentiates bases.
  • An acidic solvent (CH₃COOH, HCOOH, H₂SO₄, HF) levels bases and differentiates acids.

In glacial acetic acid the mineral acids are only partly ionised and can be ranked; the usual order given is

$$\text{HClO}_4 > \text{HBr} > \text{H}_2\text{SO}_4 > \text{HCl} > \text{HNO}_3$$

This is why perchloric acid in glacial acetic acid is the titrant of choice for weak bases (amines, alkaloids, carboxylate salts). HClO₄ protonates the solvent to CH₃COOH₂⁺, an acid far stronger than H₃O⁺ (acetic acid is a much weaker base than water), and it reacts essentially completely with the weak base, so the end point is sharp. At the same time the weakly basic solvent does not compete with the analyte, as water would.

The acid–base discrimination window

The range of pKa values that can be distinguished in a solvent is set by its autoprotolysis constant. In water the window runs from the pKa of H₃O⁺ (taken as 0 on the usual aqueous scale) to that of H₂O (14): a width of 14 units, equal to pKw. Acids with pKa below the window are levelled to H₃O⁺; bases whose conjugate acids have pKa above it are levelled to OH⁻. A solvent with a larger autoprotolysis pK has a wider window; a more acidic solvent moves the window towards stronger acids, a more basic one towards weaker acids.

Liquid Ammonia

Properties

Liquid ammonia is the most studied non-aqueous solvent. Compared with water it is less polar (ε about 22 against 78), more basic, a weaker acid, and has a lower boiling point. Consequences:

  • Ionic salts with highly charged ions (sulfates, carbonates, phosphates, fluorides) are less soluble than in water.
  • Salts with large, polarisable anions and soft cations (iodides, nitrates, thiocyanates, many Ag⁺ salts) dissolve well, helped by strong ammine complex formation.
  • Organic compounds dissolve better than in water.

Acid–base reactions

The solvent-system acid is NH₄⁺, the base NH₂⁻:

$$\text{NH}_4\text{Cl} + \text{KNH}_2 \rightarrow \text{KCl} + 2\text{NH}_3 \qquad (\text{neutralisation})$$

Because NH₃ is much more basic than water, weak aqueous acids become strong:

$$\text{CH}_3\text{COOH} + \text{NH}_3 \rightarrow \text{NH}_4^+ + \text{CH}_3\text{COO}^- \qquad (\text{complete})$$

Bases stronger than NH₂⁻ (H⁻, C₂²⁻, carbanions) are levelled to NH₂⁻; for example NaH gives NaNH₂ and H₂.

Amphoterism

Zinc amide behaves like zinc hydroxide in water:

$$\text{Zn(NH}_2)_2 + 2\text{KNH}_2 \rightarrow \text{K}_2[\text{Zn(NH}_2)_4] \qquad (\text{as an acid})$$$$\text{Zn(NH}_2)_2 + 2\text{NH}_4\text{Cl} \rightarrow [\text{Zn(NH}_3)_4]\text{Cl}_2 \qquad (\text{as a base})$$

Ammonolysis (the analogue of hydrolysis)

$$\text{SiCl}_4 + 8\text{NH}_3 \rightarrow \text{Si(NH}_2)_4 + 4\text{NH}_4\text{Cl}$$

Ammonolysis replaces a halide with NH₂ (or NH, N on heating) as hydrolysis replaces it with OH (or O).

Precipitation reversed

Solubilities in liquid ammonia differ so much from water that a metathesis can run “backwards” from the aqueous habit:

$$\text{Ba(NO}_3)_2 + 2\text{AgCl} \xrightarrow{\text{NH}_3(l)} \text{BaCl}_2\!\downarrow + 2\text{AgNO}_3$$

In water AgCl precipitates. In ammonia, Ag⁺ is held as a soluble ammine complex and AgCl dissolves, while BaCl₂ (a salt of a hard, doubly charged cation) is insoluble and precipitates.

Solutions of alkali metals

Alkali metals (and Ca, Sr, Ba) dissolve in liquid ammonia without immediate reaction:

$$\text{M} \xrightarrow{\text{NH}_3(l)} \text{M}^+(\text{am}) + e^-(\text{am})$$
PropertyDilute solutionsConcentrated solutions
Colourdeep blue (same for every metal)bronze or copper, metallic lustre
Originsolvated (ammoniated) electron, absorbing broadly in the near infrared and redelectrons delocalised as in a liquid metal
Magnetismparamagnetic (unpaired solvated electrons); molar susceptibility falls as concentration rises (electron pairing)weakly paramagnetic, approaching a metal
Conductivityhigh, mainly from the mobile electronvery high, metal-like
Densitylower than pure ammonia; solutions occupy more volume than their components (cavities around the electrons)lower still

The blue colour is independent of the metal, which is the evidence that it belongs to the electron, not to M⁺. In an intermediate concentration range, and at low enough temperature, the solution separates into two liquid phases, a lower blue one and an upper bronze one.

These solutions are metastable. Slowly, and quickly in the presence of catalysts such as iron oxides or other transition-metal compounds, they decompose:

$$2\text{Na} + 2\text{NH}_3 \rightarrow 2\text{NaNH}_2 + \text{H}_2$$

They are powerful reducing agents: the Birch reduction of arenes to 1,4-cyclohexadienes, and the preparation of compounds with metals in unusually low oxidation states, for example the reduction of K₂[Ni(CN)₄] with potassium to give K₄[Ni(CN)₄], a nickel(0) complex. With a cryptand that encapsulates the cation, sodium forms salts of the sodide anion, [Na(cryptand)]⁺Na⁻ (alkalides), and with suitable complexants, electrides, in which the anion is a trapped electron.

Anhydrous Hydrogen Fluoride

Liquid HF has a high dielectric constant (comparable to water), a convenient liquid range near room temperature, and very strong hydrogen bonding (zig-zag chains of HF molecules). It is extremely toxic and corrosive, and is handled in Teflon, polyethylene or Monel, not glass (it attacks silica).

$$3\text{HF} \rightleftharpoons \text{H}_2\text{F}^+ + \text{HF}_2^-$$

HF is a very acidic solvent, so almost everything dissolved in it acts as a base:

$$\text{KF} + \text{HF} \rightarrow \text{K}^+ + \text{HF}_2^- \qquad \text{H}_2\text{O} + 2\text{HF} \rightarrow \text{H}_3\text{O}^+ + \text{HF}_2^-$$$$\text{HNO}_3 + 2\text{HF} \rightarrow \text{H}_2\text{NO}_3^+ + \text{HF}_2^- \qquad \text{CH}_3\text{COOH} + 2\text{HF} \rightarrow \text{CH}_3\text{C(OH)}_2^+ + \text{HF}_2^-$$

Only strong fluoride-ion acceptors behave as acids:

$$\text{SbF}_5 + 2\text{HF} \rightarrow \text{H}_2\text{F}^+ + \text{SbF}_6^-$$

Similar fluoride acceptors such as AsF₅ also act as acids. HF is the medium for electrochemical fluorination of organic compounds and for preparing many fluorides.

Sulfuric Acid

Pure H₂SO₄ is viscous (strong hydrogen bonding), has a very high dielectric constant, and is a very strong acid. Its main self-ionisation is

$$2\text{H}_2\text{SO}_4 \rightleftharpoons \text{H}_3\text{SO}_4^+ + \text{HSO}_4^-$$

with smaller contributions such as 2H₂SO₄ ⇌ H₃O⁺ + HS₂O₇⁻. Because H₂SO₄ is so acidic, most solutes are bases; the characteristic base is HSO₄⁻.

Cryoscopy: counting particles

The freezing point of H₂SO₄ (about 10.4 °C) is conveniently high and its cryoscopic constant is large, so freezing-point depression measures the number of particles a solute produces, the van ’t Hoff factor i:

$$\boxed{\Delta T_f = i\,K_f\,m}$$

With \( K_f \approx 6.12 \) K kg mol⁻¹ for H₂SO₄:

SoluteReaction in H₂SO₄i
H₂OH₂O + H₂SO₄ → H₃O⁺ + HSO₄⁻2
CH₃COOHCH₃COOH + H₂SO₄ → CH₃COOH₂⁺ + HSO₄⁻2
C₂H₅OHC₂H₅OH + 2H₂SO₄ → C₂H₅HSO₄ + H₃O⁺ + HSO₄⁻3
HNO₃HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻4
Ph₃COHPh₃COH + 2H₂SO₄ → Ph₃C⁺ + H₃O⁺ + 2HSO₄⁻4
H₃BO₃H₃BO₃ + 6H₂SO₄ → B(HSO₄)₄⁻ + 3H₃O⁺ + 2HSO₄⁻6

The i = 4 value for nitric acid was a key piece of evidence for the nitronium ion, NO₂⁺, the electrophile in aromatic nitration. The i = 4 value for triphenylmethanol shows the formation of the stable triphenylmethyl cation (yellow).

Acids in sulfuric acid

Very few solutes are acids in H₂SO₄. HClO₄ and HSO₃F are only weak acids in it. Disulfuric acid H₂S₂O₇ (in oleum) is a moderately strong acid, and the strong acid of this solvent is H[B(HSO₄)₄], obtained when boric acid is dissolved in oleum:

$$\text{H[B(HSO}_4)_4] + \text{H}_2\text{SO}_4 \rightarrow \text{H}_3\text{SO}_4^+ + [\text{B(HSO}_4)_4]^-$$

Bromine Trifluoride

BrF₃ is a T-shaped interhalogen and a fierce fluorinating agent; it reacts explosively with water and most organic matter. It self-ionises:

$$2\text{BrF}_3 \rightleftharpoons \text{BrF}_2^+ + \text{BrF}_4^-$$

BrF₂⁺ is bent (AX₂E₂) and BrF₄⁻ square planar (AX₄E₂).

RoleExampleReaction
Acid (gives BrF₂⁺)SbF₅SbF₅ + BrF₃ → [BrF₂]⁺[SbF₆]⁻
Base (gives BrF₄⁻)KFKF + BrF₃ → K⁺[BrF₄]⁻
Neutralisation[BrF₂][SbF₆] + K[BrF₄] → K[SbF₆] + 2BrF₃

Because it both fluorinates and provides an acid–base medium, BrF₃ converts metals and metal compounds directly into fluoro complexes; gold, for example, gives [BrF₂][AuF₄], from which AuF₃ can be obtained.

Dinitrogen Tetroxide

N₂O₄ has a low dielectric constant (about 2.4), so it dissolves few salts, but it is a useful medium for making anhydrous metal nitrates. Its self-ionisation is written

$$\text{N}_2\text{O}_4 \rightleftharpoons \text{NO}^+ + \text{NO}_3^-$$
  • Acids are NO⁺ donors: NOCl, [NO][BF₄].
  • Bases are nitrate donors: ionic nitrates such as [Et₂NH₂]NO₃ or AgNO₃.
  • Neutralisation: NOCl + AgNO₃ → AgCl + N₂O₄.

Metals react with N₂O₄ (often in a donor solvent such as ethyl acetate) to give nitrates, releasing NO:

$$\text{Cu} + 3\text{N}_2\text{O}_4 \rightarrow \text{Cu(NO}_3)_2\cdot\text{N}_2\text{O}_4 + 2\text{NO}$$

Gentle heating of the adduct gives anhydrous Cu(NO₃)₂, which cannot be made by dehydrating the hydrate (that only hydrolyses it). Zinc nitrate shows amphoteric behaviour in this solvent: with excess nitrate it forms [Zn(NO₃)₄]²⁻, the analogue of zincate.

Liquid Sulfur Dioxide: A Cautionary Example

The self-ionisation 2SO₂ ⇌ SO²⁺ + SO₃²⁻ was proposed to fit the solvent-system picture, with SOCl₂ as an acid and sulfites as bases:

$$\text{SOCl}_2 + \text{Cs}_2\text{SO}_3 \rightarrow 2\text{CsCl} + 2\text{SO}_2$$

The reaction itself is real. The postulated self-ionisation is not supported: isotope-exchange experiments with labelled SO₂ and SOCl₂ do not show the rapid exchange that a common SO²⁺ intermediate would require, and the conductivity of pure SO₂ is very low. The lesson the exam tests: the solvent-system definition can describe a reaction correctly even when the assumed self-ionisation is doubtful. Liquid SO₂ remains a useful inert, polar, aprotic solvent, including for superacid and carbocation chemistry.

Superacids and Hammett Acidity

pH has no meaning in pure acids, so acidity is measured by the Hammett acidity function, using a weakly basic indicator B whose protonated form BH⁺ has a known pKa:

$$\boxed{H_0 = \text{p}K_{\text{BH}^+} - \log\frac{[\text{BH}^+]}{[\text{B}]}}$$

In dilute aqueous solution H₀ equals pH. A more negative H₀ means a stronger acid medium.

A superacid is a medium more acidic than 100% sulfuric acid, whose H₀ is about −12. Common examples:

SuperacidCompositionNote
Fluorosulfuric acidHSO₃FH₀ about −15
“Magic acid”HSO₃F + SbF₅SbF₅ removes F⁻-type bases, raising acidity enormously
Fluoroantimonic acidHF + SbF₅among the strongest known media
Triflic acidCF₃SO₃Ha strong Brønsted superacid

A Lewis acid (SbF₅) added to a Brønsted acid ties up the conjugate base and makes the proton far more available:

$$2\text{HF} + \text{SbF}_5 \rightarrow \text{H}_2\text{F}^+ + \text{SbF}_6^-$$

Superacids protonate very weak bases, including alkanes and alkenes, and let stable carbocations (for example the tert-butyl cation from isobutane) be observed by NMR, work recognised in G. A. Olah’s carbocation chemistry. They also stabilise unusual cations such as I₂⁺ and S₈²⁺, usually studied in SO₂ or HSO₃F as the medium.

Memory Tricks

Don’t Confuse

ThisvsThat
Levelling: several acids appear equally strongdifferentiating: their strengths can be ranked
Acetic acid as solute in NH₃: strong acidacetic acid as solvent: differentiates HClO₄ > HBr > H₂SO₄ > HCl > HNO₃
Dilute M in NH₃: blue, paramagneticconcentrated: bronze, metallic
HNO₃ in water: strong acidHNO₃ in H₂SO₄ or HF: base (gives NO₂⁺ or H₂NO₃⁺)
BrF₂⁺: bentBrF₄⁻: square planar
N₂O₄ ⇌ NO⁺ + NO₃⁻ (solvent)nitronium NO₂⁺ (from HNO₃ in H₂SO₄)
H₀ (any medium, via indicator)pH (dilute aqueous only)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Write the self-ionisation of BrF₃.
  2. What is the van ’t Hoff factor of HNO₃ dissolved in pure H₂SO₄?
  3. Is a dilute solution of potassium in liquid ammonia diamagnetic or paramagnetic?
Answers
  1. 2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻.
  2. 4: HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻.
  3. Paramagnetic: unpaired solvated electrons.

Level 2: Part B Style

Practice Q1. In liquid ammonia, acetic acid behaves as:

(a) a weak acid, as in water (b) a strong acid (c) a base (d) a non-electrolyte

Answer: (b) a strong acid

NH₃ is far more basic than water, so CH₃COOH is converted completely to NH₄⁺ and CH₃COO⁻: it is levelled to the strength of NH₄⁺.

Practice Q2. In liquid BrF₃, which solute behaves as an acid?

(a) KF (b) SbF₅ (c) NaF (d) CsF

Answer: (b) SbF₅

SbF₅ + BrF₃ → [BrF₂]⁺[SbF₆]⁻ raises the solvent’s cation. The alkali fluorides give BrF₄⁻ and are bases.

Practice Q3. When Ba(NO₃)₂ and AgCl are mixed in liquid ammonia, the precipitate is:

(a) AgCl (b) BaCl₂ (c) AgNO₃ (d) Ba(NH₂)₂

Answer: (b) BaCl₂

AgCl dissolves in liquid NH₃ (Ag⁺ forms soluble ammine complexes), while BaCl₂ is insoluble in this low-ε solvent. The metathesis runs in the opposite direction to the aqueous habit.

Practice Q4. Glacial acetic acid is used as a solvent for titrating weak bases with HClO₄ because acetic acid:

(a) is a stronger base than water, so it levels the weak bases (b) is a weaker base than water, so HClO₄ gives CH₃COOH₂⁺, an acid much stronger than H₃O⁺, which protonates the weak base completely (c) has a higher dielectric constant than water (d) reacts with the weak bases to form insoluble salts

Answer: (b)

Acetic acid is less basic than water, so perchloric acid is not levelled down to H₃O⁺ strength: its solvated proton, CH₃COOH₂⁺, is a far stronger acid, and the titration reaction with a weak base goes essentially to completion, giving a sharp end point. (a) is backwards, (c) is false (ε of acetic acid is about 6) and (d) is irrelevant.

Level 3: Part C Style

Practice Q5. A solute X (0.050 mol kg⁻¹) in pure H₂SO₄ lowers the freezing point by 1.84 K. Take \( K_f = 6.12 \) K kg mol⁻¹. Which X fits the data?

(a) H₂O (b) C₂H₅OH (c) HNO₃ (d) H₃BO₃

Answer: (d) H₃BO₃

\( i = \Delta T_f/(K_f m) = 1.84/(6.12 \times 0.050) = 1.84/0.306 = 6.0 \).

Six particles per formula unit: H₃BO₃ + 6H₂SO₄ → [B(HSO₄)₄]⁻ + 3H₃O⁺ + 2HSO₄⁻. The other options give i = 2 (H₂O), 3 (C₂H₅OH) and 4 (HNO₃), that is ΔT = 0.61, 0.92 and 1.22 K.

Practice Q6. An indicator B with \( \text{p}K_{\text{BH}^+} = -8.0 \) is 10 times more protonated than unprotonated ([BH⁺]/[B] = 10) in medium M₁. A second indicator with \( \text{p}K_{\text{BH}^+} = -10.0 \) has [BH⁺]/[B] = 10⁴ in medium M₂. Which statements are correct?

  1. H₀ of M₁ is −9.0.
  2. H₀ of M₂ is −14.0.
  3. M₁ is a superacid.
  4. M₂ is more acidic than 100% H₂SO₄.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only

\( H_0 = \text{p}K_{\text{BH}^+} - \log([\text{BH}^+]/[\text{B}]) \).

  • M₁: −8.0 − log 10 = −8.0 − 1 = −9.0.
  • M₂: −10.0 − log 10⁴ = −10.0 − 4 = −14.0.

100% H₂SO₄ has H₀ about −12. M₁ (−9.0) is less acidic than that, so it is not a superacid: statement 3 is wrong. M₂ (−14.0) is more acidic: a superacid.

Practice Q7. Consider the statements:

  1. In anhydrous HF, water and nitric acid both behave as bases.
  2. In liquid N₂O₄, NOCl is an acid and AgNO₃ is a base.
  3. The conductivity and isotope-exchange behaviour of liquid SO₂ strongly support the self-ionisation 2SO₂ ⇌ SO²⁺ + SO₃²⁻.
  4. Concentrated solutions of sodium in liquid ammonia are bronze-coloured and conduct like metals.

Which are correct?

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. H₂O + 2HF → H₃O⁺ + HF₂⁻; HNO₃ + 2HF → H₂NO₃⁺ + HF₂⁻.
  2. Correct. NOCl gives NO⁺ (solvent cation); AgNO₃ gives NO₃⁻ (solvent anion); they neutralise to AgCl + N₂O₄.
  3. Wrong. Pure SO₂ conducts very poorly and labelled-sulfur exchange with SOCl₂ is not fast enough to support a common SO²⁺ intermediate.
  4. Correct. Electrons delocalise as in a liquid metal.

Quick Revision Table

IdeaFact
Classificationprotic (acidic, basic, amphiprotic); aprotic (inert, dipolar coordinating, self-ionising)
Levellingstrongest acid = SH₂⁺, strongest base = S⁻ of the solvent
Basic solventslevel acids (NH₃: CH₃COOH strong)
Acidic solventslevel bases; differentiate acids (CH₃COOH: HClO₄ > HBr > H₂SO₄ > HCl > HNO₃)
NH₃ (l)2NH₃ ⇌ NH₄⁺ + NH₂⁻; ε about 22; bp about −33 °C
In NH₃Zn(NH₂)₂ amphoteric; SiCl₄ ammonolysis; BaCl₂ precipitates from Ba(NO₃)₂ + AgCl
M in NH₃dilute: blue, paramagnetic, e⁻(am); concentrated: bronze, metallic; decomposes to MNH₂ + H₂
HF3HF ⇌ H₂F⁺ + HF₂⁻; acids are strong F⁻ acceptors (SbF₅, AsF₅); H₂O, HNO₃, KF are bases
H₂SO₄2H₂SO₄ ⇌ H₃SO₄⁺ + HSO₄⁻; ΔT = i K_f m, K_f ≈ 6.12 K kg mol⁻¹
i values in H₂SO₄H₂O 2, CH₃COOH 2, C₂H₅OH 3, HNO₃ 4, Ph₃COH 4, H₃BO₃ 6
BrF₃2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻; SbF₅ acid, KF base
N₂O₄N₂O₄ ⇌ NO⁺ + NO₃⁻; NOCl acid, nitrates bases; anhydrous metal nitrates
SO₂ (l)SOCl₂ + Cs₂SO₃ → 2CsCl + 2SO₂; self-ionisation doubted
HammettH₀ = pK_BH⁺ − log([BH⁺]/[B]); superacid H₀ < about −12
SuperacidsHSO₃F, HSO₃F/SbF₅ (magic acid), HF/SbF₅, CF₃SO₃H

Key Takeaways

What’s Next

Advertisement
Advertisement