Skip to content

Principles of Catalysis: Energetics, Cycles and Kinetics

CSIR NET catalysis basics: why K is unchanged, rate enhancement, TON and TOF, selectivity and ee, catalytic cycles, saturation kinetics, energetic span.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: One Atom, a Million Molecules
  3. 1. What a Catalyst Is
  4. 2. Energetics: How Much Faster?
  5. 3. Measuring a Catalyst: Activity, Productivity, Lifetime
  6. 4. Selectivity: Often Worth More Than Activity
  7. 5. Catalytic Cycles
  8. 6. Classes of Catalysis
  9. 7. Deactivation and Inhibition
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: One Atom, a Million Molecules

1. What a Catalyst Is

A catalyst is a substance that increases the rate of a reaction without itself being consumed and without changing the standard Gibbs energy change of the overall reaction. The phenomenon is catalysis. A substance that slows a reaction by interfering with a catalyst is an inhibitor; one that destroys catalytic activity is a poison.

Three working consequences follow directly from the definition:

  1. The catalyst appears on both sides of the net cycle. It is consumed in one step and regenerated in a later one, so it does not appear in the balanced overall equation.
  2. The equilibrium constant is unchanged. \( K = \exp(-\Delta_r G^\circ/RT) \) depends only on reactants and products. Because \( K = k_f/k_r \) for an elementary equilibrium, a catalyst that multiplies \( k_f \) by some factor multiplies \( k_r \) by the same factor (microscopic reversibility).
  3. A catalyst cannot make a thermodynamically forbidden reaction happen. It can only bring a reaction with \( \Delta_r G < 0 \) to equilibrium faster, or let it reach equilibrium at a lower temperature where K is more favourable.

2. Energetics: How Much Faster?

The energy profile

A catalyst replaces one high barrier by a sequence of lower ones. Reactants and products sit at the same Gibbs energies with or without the catalyst; only the path between them changes.

graph LR
    R["Reactants
G = 0"] -->|"uncatalysed:
one high barrier"| P["Products
same G with or
without catalyst"] R -->|"+ catalyst"| I1["Catalyst-substrate
complex"] I1 -->|"lower barrier"| I2["Catalyst-product
complex"] I2 -->|"product release,
catalyst regenerated"| P

Rate enhancement from a lowered barrier

From the Eyring equation, \( k = (k_BT/h)\exp(-\Delta G^\ddagger/RT) \). If the catalysed and uncatalysed paths have the same pre-exponential behaviour, the ratio of rate constants depends only on the barrier lowering \( \Delta\Delta G^\ddagger \):

$$\boxed{\frac{k_{\text{cat}}}{k_{\text{uncat}}} = \exp\!\left(\frac{\Delta\Delta G^\ddagger}{RT}\right)}$$
Barrier lowered byFactor at 298 KFactor at 500 K
10 kJ mol⁻¹about 57about 11
20 kJ mol⁻¹about 3.2 × 10³about 1.2 × 10²
30 kJ mol⁻¹about 1.8 × 10⁵about 1.4 × 10³

Catalysis and the temperature compromise

For an exothermic equilibrium, raising T speeds the reaction but lowers K. A catalyst breaks the compromise: it allows a lower T at an acceptable rate, so a higher equilibrium conversion is reached. This is the correct way to say that “a catalyst improves the yield”: it improves the achievable yield by allowing milder conditions, never by moving K at a given temperature.

3. Measuring a Catalyst: Activity, Productivity, Lifetime

QuantityDefinitionUnitsComment
Catalyst loadingmol catalyst per mol limiting substrate × 100mol%1 mol% means substrate : catalyst = 100 : 1
Turnover number (TON)mol product per mol catalyst (or active site)dimensionlessstrictly, the total before the catalyst dies; often quoted for a given run
Turnover frequency (TOF)turnovers per active site per unit times⁻¹ or h⁻¹intrinsic activity; should be quoted at low conversion or as an initial rate
Space-time yieldproduct per unit reactor volume per timekg L⁻¹ h⁻¹what a plant engineer needs
Selectivitymol desired product / mol substrate converted%independent of conversion in the definition
Yieldconversion × selectivity%what you isolate
$$\text{TON} = \frac{n_{\text{product}}}{n_{\text{catalyst}}}, \qquad \text{TOF} = \frac{\text{TON}}{t} \ \ (\text{or } \frac{1}{n_{\text{cat}}}\frac{dn_P}{dt} \text{ initially})$$

For heterogeneous catalysts, “per active site” needs a site count (selective chemisorption of H₂ or CO on metals); the details and the dispersion calculation are on Heterogeneous Catalysis. For enzymes, TOF at saturation is \( k_{\text{cat}} \).

4. Selectivity: Often Worth More Than Activity

A catalyst that is fast but unselective makes waste. Selectivity comes in several kinds:

KindQuestion it answersCatalyst example
Chemoselectivitywhich functional group reactsLindlar Pd (alkyne → cis-alkene, alkene left alone)
Regioselectivitywhich position / orientationlinear vs branched aldehyde in hydroformylation (n : iso ratio)
Diastereoselectivitywhich relative configurationdirected hydrogenations by a coordinating OH group
Enantioselectivitywhich enantiomerRu–BINAP hydrogenation, Sharpless epoxidation, proline aldol
Shape selectivitywhich molecule fitsZSM-5 favours para-xylene

Enantioselectivity and the energy difference

If the two enantiomers come from competing diastereomeric transition states that differ by \( \Delta\Delta G^\ddagger \), under kinetic control:

$$\text{er} = \frac{[\text{major}]}{[\text{minor}]} = \exp\!\left(\frac{\Delta\Delta G^\ddagger}{RT}\right), \qquad \text{ee} = \frac{\text{er} - 1}{\text{er} + 1}$$
eeer\( \Delta\Delta G^\ddagger \) at 298 Kat 195 K
80%9 : 15.4 kJ mol⁻¹3.6 kJ mol⁻¹
90%19 : 17.3 kJ mol⁻¹4.8 kJ mol⁻¹
96%49 : 19.6 kJ mol⁻¹6.3 kJ mol⁻¹
99%199 : 113.1 kJ mol⁻¹8.6 kJ mol⁻¹

Two lessons: high ee needs only a modest energy difference (about the strength of one hydrogen bond), and cooling the reaction raises ee for a fixed \( \Delta\Delta G^\ddagger \). The asymmetric side of this is developed in Substrate, Reagent and Catalyst Control.

5. Catalytic Cycles

Vocabulary

TermMeaning
Precatalystthe compound you add; converted in situ into the active species
Active speciesthe species that enters the cycle
Resting statethe most abundant catalyst-containing species during turnover
Turnover-limiting stepthe step whose barrier, measured from the resting state, controls TOF
Off-cycle speciesa catalyst form outside the cycle (dimer, ligand adduct, product complex) that lowers the active concentration

A general cycle for a one-substrate reaction S → P with catalyst C:

graph LR
    C["C (active catalyst)"] -->|"+ S, binding"| CS["C·S"]
    CS -->|"chemical step(s)"| CP["C·P"]
    CP -->|"- P, release"| C
    C -.->|"reversible"| D["Off-cycle:
C₂ dimer or
C·inhibitor"]

Saturation kinetics: the universal shape

Apply the steady-state approximation to \( \mathrm{C + S \rightleftharpoons C{\cdot}S \rightarrow C + P} \) with total catalyst \( [\mathrm{C}]_0 \):

$$\boxed{\text{rate} = \frac{k_{\text{cat}}[\mathrm{C}]_0[\mathrm{S}]}{K + [\mathrm{S}]}}$$

This is the Michaelis–Menten equation, but it is not special to enzymes: it describes any catalyst that binds substrate before the chemical step (organometallic complexes, organocatalysts and, in the Langmuir form, solid surfaces).

RegimeResting stateOrder in SOrder in catalyst
\( [\mathrm{S}] \ll K \)free catalyst C11
\( [\mathrm{S}] \gg K \)C·S complex01

Reading a rate law backwards gives the resting state: zero order in substrate means the catalyst is saturated with it. First order in catalyst is the normal case for a monomeric active species.

Fractional order in catalyst

If the catalyst rests as an inactive dimer \( \mathrm{C_2} \rightleftharpoons 2\mathrm{C} \) with \( K_d \) small, the active monomer concentration is \( [\mathrm{C}] = (K_d[\mathrm{C_2}])^{1/2} \approx (K_d[\mathrm{C}]_0/2)^{1/2} \), so the rate is half order in total catalyst. Half-order dependence on catalyst loading is a classic signature of a dimeric resting state that must dissociate.

Which step controls the rate? The energetic span

Students often name “the step with the highest barrier” as rate-determining. In a cycle that is wrong when the intermediates sit at very different energies. The energetic span model (Kozuch and Shaik) gives the TOF of a cycle at steady state from two states:

  • the TOF-determining intermediate (TDI), a deep energy well, and
  • the TOF-determining transition state (TDTS), a high transition state,

chosen as the pair that maximises

$$\delta E = \begin{cases} T_{\text{TDTS}} - I_{\text{TDI}} & \text{if the TDTS comes after the TDI in the cycle} \\ T_{\text{TDTS}} - I_{\text{TDI}} + \Delta_r G & \text{if the TDTS comes before the TDI} \end{cases}$$$$\boxed{\text{TOF} \approx \frac{k_BT}{h}\, e^{-\delta E/RT}}$$

\( \Delta_r G \) is negative for an exergonic reaction, so a TS that lies before a deep intermediate is “discounted” by the reaction energy of one turnover.

Two design rules come out of the model and are popular Part C statements:

  1. Over-stabilising an intermediate slows the catalyst if that intermediate becomes the TDI (it deepens the well the system must climb out of). This is the Sabatier principle in molecular language.
  2. Making the overall reaction more exergonic helps only when the TDTS precedes the TDI.

6. Classes of Catalysis

ClassCatalystTypical reactionsWhere on this site
Homogeneous, acid–baseH₃O⁺, OH⁻, buffer acids and basesester hydrolysis, enolisation, mutarotationEnzyme Kinetics, Salt Effects and Homogeneous Catalysis
Homogeneous, Lewis acidAlCl₃, BF₃, TiCl₄, lanthanide triflatesFriedel–Crafts, Diels–Alder, aldolCatalysis Across Chemistry
Homogeneous, organometallicRh, Pd, Ru, Co, Ir complexeshydrogenation, hydroformylation, cross-coupling, metathesisHomogeneous Catalysis by Organometallic Complexes
Heterogeneousmetals, oxides, zeolitesammonia synthesis, cracking, oxidationHeterogeneous Catalysis
Organocatalysissmall organic molecules (amines, thioureas, NHCs)aldol, Michael, benzoinCatalysis Across Chemistry
Phase-transferQ⁺X⁻, crown etherssubstitution, alkylation, oxidation in two phasesCatalysis Across Chemistry
Biocatalysisenzymes, whole cellsresolutions, reductions, transaminationsEnzymes: Catalysis, Kinetics and Regulation
Photo- and electrocatalysissemiconductors, Ru/Ir complexes, electrode surfacesphotoredox couplings, water splittingCatalysis Across Chemistry
Autocatalysisa product of the reactionpermanganate–oxalate, some polymerisationsEnzyme Kinetics, Salt Effects and Homogeneous Catalysis

Homogeneous versus heterogeneous: the trade-off

FeatureHomogeneousHeterogeneous
Active sitesevery molecule, well definedsurface sites, a distribution
Selectivityhigh, tunable by ligandsusually lower, improved by supports and promoters
Conditionsmildoften high T
Mechanistic studyNMR, IR, kinetics of defined speciesharder; surface science
Separation and reusedifficult; metal traces in producteasy filtration; continuous fixed beds
Thermal stabilitylimitedhigh

The gap is bridged by heterogenised catalysts: complexes anchored on silica or polymers, aqueous biphasic systems (a water-soluble sulfonated phosphine such as TPPTS keeps rhodium in the water layer while the organic product separates), fluorous biphasic systems, and supported ionic-liquid phases. These matter for green chemistry because separation and metal recovery dominate the waste of many catalytic processes.

7. Deactivation and Inhibition

ModeWhat happensTypical case
Poisoninga strongly binding species blocks active sitessulfur on Ni, Pt, Pd; CO on some metal sites
Selective poisoning (useful)partial poisoning tunes selectivityLindlar catalyst: Pd/CaCO₃ with lead acetate and quinoline
Fouling / cokingcarbon deposits cover the surfaceacid cracking catalysts, regenerated by burning off coke
Sinteringmetal particles grow, losing surface areahigh-temperature supported metals
Leachingactive metal dissolves into the liquidsupported Pd in liquid-phase coupling
Ligand degradation / cluster formationhomogeneous complexes decompose, metal precipitatesphosphine oxidation; “palladium black”
Product inhibitionproduct binds the catalyst and competes with substratemany enzymes; Friedel–Crafts acylation

A sharp fall in TOF with time, or an induction period followed by acceleration, both carry mechanistic information: deactivation in the first case; slow precatalyst activation (or autocatalysis) in the second.

Memory Tricks

Don’t Confuse

ThisvsThat
Catalyst: regenerated, does not appear in the net equationReagent or promoter of a reaction (OH⁻ in saponification): consumed
TON: dimensionless countTOF: count per unit time (s⁻¹, h⁻¹)
Selectivity: product / substrate convertedYield: product / substrate charged (= conversion × selectivity)
Rate-determining step of a linear sequenceTOF-determining states (TDI, TDTS) of a cycle
Resting state: most abundant catalyst speciesActive species: the one that turns over (may be a minor species)
Inhibitor: reversibly slows the catalystPoison: deactivates, often irreversibly
ee: \( (\text{er}-1)/(\text{er}+1) \)er: ratio of enantiomers; 90% ee is 19 : 1, not 9 : 1
Catalyst lowers \( E_a \) of forward and reverseCatalyst never alters \( \Delta H \) or \( \Delta G \)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Why does a catalyst not change the equilibrium constant of a reaction?
  2. Define turnover frequency and give its SI unit.
  3. A reaction is zero order in substrate and first order in catalyst. What is the resting state of the catalyst?
Answers
  1. K depends only on \( \Delta_r G^\circ \), a property of reactants and products. The catalyst lowers the forward and reverse barriers equally, so \( k_f/k_r \) is unchanged.
  2. The number of turnovers (moles of product per mole of active sites) per unit time; unit s⁻¹ (h⁻¹ is also common).
  3. The catalyst–substrate complex: the catalyst is saturated with substrate, so adding more substrate does not raise the rate.

Level 2: Part B Style

Practice Q1. At 298 K a catalyst lowers the Gibbs energy of activation of a reaction by 20 kJ mol⁻¹ without changing the pre-exponential term. The rate increases by a factor of approximately:

(a) 8 (b) 57 (c) 3.2 × 10³ (d) 1.8 × 10⁵

Answer: (c)

\( \exp(20000/(8.314\times298)) = \exp(8.07) = 3.2\times10^3 \). Option (b) is the factor for 10 kJ mol⁻¹; (d) for 30 kJ mol⁻¹.

Practice Q2. An asymmetric catalyst gives a product with 90% ee at 298 K. The difference in Gibbs energy between the competing diastereomeric transition states is closest to:

(a) 2.5 kJ mol⁻¹ (b) 5.4 kJ mol⁻¹ (c) 7.3 kJ mol⁻¹ (d) 11.4 kJ mol⁻¹

Answer: (c)

90% ee means 95 : 5, er = 19. \( \Delta\Delta G^\ddagger = RT\ln 19 = 8.314\times298\times2.944 = 7.3 \) kJ mol⁻¹. Option (b) uses er = 9 (the ee/er confusion).

Practice Q3. A coupling reaction is run with 0.050 mol% catalyst and gives 92% product in 4.0 h. The TON and average TOF are:

(a) 1840 and 460 h⁻¹ (b) 184 and 46 h⁻¹ (c) 1840 and 46 h⁻¹ (d) 2000 and 500 h⁻¹

Answer: (a)

TON = 0.92 / 0.00050 = 1840; TOF = 1840 / 4.0 h = 460 h⁻¹ (0.128 s⁻¹). Option (d) ignores the 92% yield; (b) divides the loading by 10 and then the TON by 10 again for the TOF.

Practice Q4. In which of the following does the added species act as a true catalyst?

(a) NaOH in the hydrolysis of ethyl acetate to sodium acetate (b) AlCl₃ (1.1 equiv) in the acylation of anisole with acetyl chloride (c) H₂SO₄ (a few drops) in the esterification of acetic acid with ethanol (d) AIBN in the radical bromination of toluene with NBS

Answer: (c)

The proton is regenerated in acid-catalysed esterification. Hydroxide is consumed as acetate forms (a); AlCl₃ is held by the product ketone (b); AIBN is an initiator consumed on decomposition (d).

Level 3: Part C Style

Practice Q5. A catalytic cycle has the Gibbs energy profile (kJ mol⁻¹) C + S (0) → I₁ (−20) → TS₁ (+55) → I₂ (−40) → TS₂ (+30) → C + P (−80). Which statements are correct at 298 K?

  1. The energetic span is 75 kJ mol⁻¹, with I₁ as TDI and TS₁ as TDTS.
  2. The TOF is about 0.45 s⁻¹.
  3. Stabilising I₁ by a further 10 kJ mol⁻¹ (to −30) would speed up the catalyst.
  4. Making the overall reaction more exergonic (C + P at −100) without changing any other state would not change the TOF.

(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 4 only
  • Spans: TS₁ − I₁ = 75; TS₂ − I₁ = 50; TS₂ − I₂ = 70; TS₁ − I₂ + ΔG = 55 + 40 − 80 = 15. Maximum 75. True.
  • TOF \( = 6.21\times10^{12}\times e^{-75000/(8.314\times298.15)} = 0.45 \) s⁻¹. True.
  • I₁ at −30 makes δE = 85 kJ mol⁻¹; TOF falls by \( e^{10000/RT} \approx 57 \). Deepening the TDI slows the catalyst. False.
  • The TDTS (TS₁) lies after the TDI (I₁), so \( \Delta_r G \) does not enter δE. The only span containing \( \Delta_r G \), TS₁ − I₂ + ΔG, falls further (to −5). True.

Practice Q6. Initial rates of a homogeneous catalytic reaction were measured at a fixed catalyst concentration of 1.0 mM:

[S] (M)0.0200.0500.100.50
Rate (mM s⁻¹)0.5711.001.331.82

Which statements are correct?

  1. The data fit saturation kinetics with \( k_{\text{cat}} = 2.0\ \text{s}^{-1} \) and K = 0.050 M.
  2. At [S] = 0.50 M the resting state is mainly the catalyst–substrate complex.
  3. The apparent order in S at [S] = 0.020 M is about 0.7.
  4. Doubling the catalyst concentration at [S] = 0.50 M would leave the rate unchanged because the reaction is zero order there.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  • Check: \( 2.0\times1.0\times0.020/0.070 = 0.571 \); \( 2.0\times0.050/0.100 = 1.00 \); \( 2.0\times0.10/0.15 = 1.33 \); \( 2.0\times0.50/0.55 = 1.82 \) mM s⁻¹. True.
  • [S] = 10K, so the fraction bound is \( [\mathrm{S}]/(K+[\mathrm{S}]) = 0.91 \). True.
  • Order in S \( = K/(K+[\mathrm{S}]) = 0.050/0.070 = 0.71 \). True.
  • Zero order in substrate does not mean zero order in catalyst: the rate is \( k_{\text{cat}}[\mathrm{C}]_0 \) and doubles. False.

Practice Q7. For a palladium-catalysed reaction, initial rate was measured against total catalyst loading at fixed substrate concentrations:

[Pd]ₜₒₜₐₗ (mM)0.251.04.0
Rate (µM s⁻¹)1.02.04.0

Which statements are correct?

  1. The rate is half order in total catalyst.
  2. The data are consistent with a resting state that is an inactive dimer in equilibrium with a small amount of active monomer.
  3. TOF per palladium atom increases with loading.
  4. Adding a ligand that splits the dimer into monomers would be expected to raise the rate per palladium.

(a) 1 and 2 only (b) 1, 2 and 4 only (c) 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 4 only
  • A 16-fold increase in loading doubles the rate twice (×4): order \( = \ln 4/\ln 16 = 0.5 \). True.
  • With \( \mathrm{Pd_2} \rightleftharpoons 2\mathrm{Pd} \) and small \( K_d \), [Pd]active ∝ [Pd]total^{1/2}. True.
  • Rate per Pd: 1.0/0.25 = 4.0, 2.0/1.0 = 2.0, 4.0/4.0 = 1.0 (in units of 10⁻³ s⁻¹). It falls with loading. False.
  • Breaking the off-cycle dimer raises the active fraction. True.

Quick Revision Table

IdeaFormula or fact
Catalystraises rate, regenerated, \( \Delta_r G^\circ \) and K unchanged
Rate enhancement\( k_{\text{cat}}/k_{\text{uncat}} = e^{\Delta\Delta G^\ddagger/RT} \); 5.71 kJ mol⁻¹ per factor 10 at 298 K
Loadingmol% = 100 × n(cat)/n(substrate)
TON, TOFTON = n(P)/n(cat); TOF = TON/t (initial rate preferred)
Yieldconversion × selectivity
er and eeer = \( e^{\Delta\Delta G^\ddagger/RT} \); ee = (er − 1)/(er + 1); 90% ee ↔ 19 : 1 ↔ 7.3 kJ mol⁻¹ (298 K)
Saturationrate = \( k_{\text{cat}}[\mathrm{C}]_0[\mathrm{S}]/(K+[\mathrm{S}]) \); order in S = \( K/(K+[\mathrm{S}]) \)
Half order in catalystdimeric resting state
Energetic spanTOF ≈ \( (k_BT/h)e^{-\delta E/RT} \); δE = T − I (TS after I) or T − I + \( \Delta_r G \) (TS before I)
\( k_BT/h \)\( 6.21\times10^{12} \) s⁻¹ at 298 K
Not catalystsOH⁻ in saponification, AlCl₃ in FC acylation, radical initiators
Deactivationpoisoning, coking, sintering, leaching, ligand loss, product inhibition

Key Takeaways

What’s Next