Characterisation of Inorganic Compounds
CSIR NET Chemical Sciences: IR, Raman, UV-vis, NMR, EPR, Mössbauer, NQR, mass spectrometry, XPS/UPS/Auger and microscopy for inorganic compounds.
- 6
- Topics
- 95
- Min read
- 01 IR and Raman Spectroscopy of Inorganic CompoundsStart here CSIR NET chemistry: IR and Raman selection rules, mutual exclusion, counting active modes, metal carbonyl ν(CO) bands, linkage isomers and isotope shifts.
- 02 UV-Visible Spectroscopy of Inorganic Compounds CSIR NET chemistry: Beer–Lambert law, assigning d–d, charge-transfer and IVCT bands, Δo and Racah B from spectra, Job's method, isosbestic points.
- 03 NMR Spectroscopy of Inorganic Compounds CSIR NET chemistry: multinuclear NMR, 2nI+1 patterns, quadrupolar nuclei, 195Pt and 129Xe satellites, 19F/31P spectra, fluxionality, paramagnetic shifts.
- 04 EPR Spectroscopy of Inorganic Compounds CSIR NET chemistry: EPR resonance condition, g values, hyperfine and superhyperfine lines, Cu(II) and VO²⁺ spectra, Kramers ions, zero-field splitting.
- 05 Mössbauer and NQR Spectroscopy CSIR NET chemistry: recoil-free γ resonance, isomer shift, quadrupole and magnetic splitting in ⁵⁷Fe and ¹¹⁹Sn; NQR frequencies, η and ionic character.
- 06 Mass Spectrometry, Electron Spectroscopy and Microscopy CSIR NET chemistry: ionisation methods, isotope patterns and charge states in MS; XPS, UPS and Auger; SEM, TEM, STM and AFM for inorganic materials.
- Characterisation of Inorganic Compounds Formula Sheet and Short Notes Revise The whole chapter on one page.
Chapter Overview
The inorganic section of the CSIR NET Chemical Sciences syllabus ends its list of topics with characterisation of inorganic compounds, and names the tools: IR and Raman, NMR and EPR, Mössbauer, UV-vis, NQR, mass spectrometry, and electron spectroscopy and microscopic techniques. Each tool answers a different question about a compound you have made or been given:
| Question | Tool |
|---|---|
| What is its symmetry? Is that CO terminal or bridging? Is thiocyanate N- or S-bound? | IR and Raman |
| Why is it coloured, how big is Δo, what is the stoichiometry in solution? | UV-vis |
| Which atoms are bonded to which, is it cis or trans, is it fluxional? | NMR |
| Where is the unpaired electron, and on which atoms does it spread? | EPR |
| What is the oxidation and spin state of iron or tin? | Mössbauer |
| How unsymmetrical is the electric field at a nucleus, how ionic is the bond? | NQR |
| What is the formula, how many ligands, what charge? | Mass spectrometry |
| What is at the surface, and in which oxidation state? What does it look like? | XPS, UPS, Auger; SEM, TEM, STM, AFM |
This is the chapter in which the rest of inorganic chemistry is tested from the experimental side. Part C questions on coordination chemistry, organometallics and clusters often hand you a spectrum rather than a structure.
What You’ll Learn
By the end of this chapter you will be able to:
- Count IR- and Raman-active modes from a point group, apply the mutual exclusion rule, and assign cis/trans or fac/mer carbonyl isomers from the number of ν(CO) bands
- Use band positions to judge back-donation, bridging CO, and the binding mode of SCN⁻, NO₂⁻, SO₄²⁻ and carboxylates
- Classify UV-vis bands by intensity and behaviour, extract Δo and Racah B, and use Beer–Lambert, Job’s and isosbestic-point analysis
- Predict multinuclear NMR patterns, including quadrupolar nuclei and isotope satellites, and get rates from coalescence
- Read EPR g values, hyperfine and superhyperfine patterns, and decide which ions are EPR silent
- Assign iron and tin oxidation and spin states from isomer shifts and quadrupole splittings, and interpret NQR frequencies
- Read isotope clusters and charge states in mass spectra, XPS chemical shifts and satellites, and choose the right microscope
Prerequisites
- Point groups and character tables (MSc symmetry course)
- Crystal-field theory and term symbols: Transition Elements and Coordination Compounds
- Shapes of main-group molecules: Structure and Bonding (VSEPR)
- f-block spectra for contrast: Inner Transition Elements
- Quantum angular momentum and spin: Quantum Mechanics Core
Learning Path
graph TD
A["Coordination chemistry:
CFT, term symbols, magnetism"] --> C["2. UV-Visible Spectroscopy"]
S["Symmetry and point groups"] --> B["1. IR and Raman"]
A --> E["4. EPR"]
B --> D["3. NMR (multinuclear)"]
D --> E
D --> F["5. Mössbauer and NQR"]
E --> F
C --> G["6. Mass Spectrometry,
Electron Spectroscopy, Microscopy"]
F --> G
G --> H["Quick Revision"]Topics in This Chapter
| # | Topic | What it covers | Time |
|---|---|---|---|
| 1 | IR and Raman Spectroscopy | Selection rules, mutual exclusion, depolarisation, resonance Raman, mode counts for common shapes, group frequencies, isotope shifts, ν(CO) position and band counts, SCN⁻, NO₂⁻, SO₄²⁻ and carboxylate binding modes | 35 min |
| 2 | UV-Visible Spectroscopy | Beer–Lambert law and deviations, band types and ε, CT criteria, Robin–Day classes, Δo and B from spectra, Job’s method, mole-ratio method, isosbestic points, two-component analysis, photometric titrations | 30 min |
| 3 | NMR Spectroscopy of Inorganic Compounds | Spin-1/2 and quadrupolar nuclei, \( 2nI + 1 \), ¹⁹F/³¹P/¹¹B patterns, satellites, \( ^1J(\text{Pt–P}) \) and trans influence, hydrides, fluxionality and coalescence, contact and pseudocontact shifts, shift reagents | 35 min |
| 4 | EPR Spectroscopy | Resonance condition, g values and spin–orbit coupling, anisotropy, Cu(II) ground states, hyperfine and superhyperfine lines, McConnell relation, Kramers’ theorem, zero-field splitting, g = 4.3 | 30 min |
| 5 | Mössbauer and NQR Spectroscopy | Recoil-free resonance, isomer shift (⁵⁷Fe and ¹¹⁹Sn), quadrupole and magnetic splitting, Prussian blue; NQR levels for I = 1, 3/2, 5/2, η, isotope ratios, Townes–Dailey ionic character | 35 min |
| 6 | Mass Spectrometry, Electron Spectroscopy and Microscopy | Ionisation methods and analysers, isotope patterns, charge states, carbonyl fragmentation, ICP-MS; XPS, UPS, Auger, EDX; SEM, TEM, HAADF, STM, AFM | 35 min |
| — | Quick Revision | Every rule, number and trap from the chapter on one page | 10 min |
Where each official syllabus line is covered
| Official topic line | Page |
|---|---|
| IR and Raman | 1 |
| NMR and EPR | 3 (NMR), 4 (EPR) |
| Mossbauer | 5 (first half) |
| UV-vis | 2 |
| NQR | 5 (second half) |
| Mass spectrometry | 6 |
| Electron spectroscopy and microscopic techniques | 6 (XPS, UPS, Auger, EDX; SEM, TEM, STM, AFM) |
How CSIR NET Asks It
Per the NTA information bulletin for the December 2026 cycle, the Chemical Sciences paper (3 hours, 200 marks) is marked as follows:
| Part | Questions given | Attempt | Correct | Wrong | Maximum |
|---|---|---|---|---|---|
| B | 40 | 35 | +2 | −0.5 | 70 |
| C | 60 | 25 | +4 | −1 | 100 |
If more than the permitted number of questions is answered in a part, only the first ones answered are evaluated. The bulletin does not say how many questions come from each syllabus line. What can be said is the kind of question each technique supports:
- Part B (recall and one-step reasoning): the number of IR or Raman bands of a molecule or carbonyl isomer; which molecule obeys mutual exclusion; the ν(CO) order in an isoelectronic series; the origin of a colour; the multiplicity of a ¹⁹F, ³¹P or ¹¹B signal; the number of EPR hyperfine lines; which ion is EPR silent; which iron compound has the largest isomer shift; an isotope pattern; XPS shift with oxidation state; STM versus AFM.
- Part C (multi-step and data): assigning an isomer or binding mode from band counts and positions; Δo, B and β from three bands; two-component Beer–Lambert analysis; a coupling pattern plus satellites leading to a structure; coalescence rates and ΔG‡; g and A values leading to a ground state and donor count; δ and ΔE_Q leading to oxidation and spin state; NQR frequencies leading to \( e^2Qq \) or ionic character; ESI charge states and TOF times.
Quick Reference
| Technique | Key fact |
|---|---|
| IR / Raman | dipole vs polarisability change; centrosymmetric: mutual exclusion |
| ν(CO) bands | M(CO)₆ 1; M(CO)₅L 3; cis-M(CO)₄L₂ 4, trans 1; fac 2, mer 3 |
| UV-vis | A = εcl; ε ladder 1 / 10 / 10²–10³ / 10³–10⁵; Job maximum at n/(n + 1) |
| NMR | \( 2nI + 1 \); Pt satellites 1:4:1; \( k_c = \pi\Delta\nu/\sqrt2 \) |
| EPR | \( h\nu = g\mu_B B \); Cu 4, Mn 6, V 8 lines; \( g_\parallel > g_\perp > 2 \): \( d_{x^2-y^2} \) |
| Mössbauer | ⁵⁷Fe: more s density, lower δ; HS Fe(II) largest δ and ΔE_Q; sextet 3:2:1:1:2:3 |
| NQR | I = 3/2: \( \nu = e^2Qq/2h \); no line in cubic sites |
| MS | Cl 3:1, Br 1:1; isotope spacing 1/z |
| XPS | KE = hν − BE − φ; BE rises with oxidation state |
| Microscopy | STM conductors; AFM any surface; TEM lattice; SEM topography |
The coordination-chemistry ideas used throughout are in Transition Elements and Coordination Compounds, and the f-block counterpart of UV-vis and EPR reasoning is in Inner Transition Elements. For the subject overview and marking, see Chemical Sciences. Found an error? See About for how to report it.