Skip to content

Complex Reactions and the Steady-State Approximation

CSIR NET kinetics: reversible, parallel and consecutive reactions, relaxation methods, rate-determining step, pre-equilibrium and steady state.

  • 18 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: The Intermediate That Peaks and Vanishes
  3. Reversible (Opposing) Reactions
  4. Parallel (Competing) Reactions
  5. Consecutive Reactions
  6. Simplifying Mechanisms
  7. How the Approximations Fit Together
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: The Intermediate That Peaks and Vanishes

Reversible (Opposing) Reactions

First order in both directions

For \( \mathrm{A} \underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}} \mathrm{B} \), starting with \( [\mathrm{A}]_0 = a \) and no B:

$$\frac{d[\mathrm{A}]}{dt} = -k_1[\mathrm{A}] + k_{-1}[\mathrm{B}] = -k_1[\mathrm{A}] + k_{-1}(a - [\mathrm{A}])$$

The solution is an exponential approach to equilibrium:

$$\boxed{[\mathrm{A}] - [\mathrm{A}]_{\text{eq}} = \left(a - [\mathrm{A}]_{\text{eq}}\right)e^{-(k_1 + k_{-1})t}}$$

with \( [\mathrm{A}]_{\text{eq}} = \dfrac{k_{-1}a}{k_1 + k_{-1}} \) and \( K = \dfrac{[\mathrm{B}]_{\text{eq}}}{[\mathrm{A}]_{\text{eq}}} = \dfrac{k_1}{k_{-1}} \).

Three consequences:

  1. The observed first-order constant for approach to equilibrium is the sum \( k_1 + k_{-1} \), not \( k_1 \).
  2. Measuring \( k_{\text{obs}} = k_1 + k_{-1} \) and K separately gives each constant: \( k_1 = k_{\text{obs}}K/(1+K) \), \( k_{-1} = k_{\text{obs}}/(1+K) \).
  3. The relation \( K = k_1/k_{-1} \) is the kinetic face of detailed balance (microscopic reversibility): at equilibrium every elementary step runs forward and backward at equal rates.

Relaxation methods

Eigen’s relaxation methods apply this result to fast equilibria. A small, sudden perturbation (a temperature jump from a capacitor discharge or laser pulse, a pressure jump, an electric-field jump) shifts the position of equilibrium. The system then relaxes to the new equilibrium exponentially with a relaxation time \( \tau \). Because the displacement is small, the rate equation can be linearised in the displacement \( x \) from equilibrium, and every mechanism gives a single exponential \( x = x_0e^{-t/\tau} \).

Equilibrium\( 1/\tau \)
\( \mathrm{A} \rightleftharpoons \mathrm{B} \)\( k_1 + k_{-1} \)
\( \mathrm{A + B} \rightleftharpoons \mathrm{C} \)\( k_1([\mathrm{A}]_{\text{eq}} + [\mathrm{B}]_{\text{eq}}) + k_{-1} \)
\( \mathrm{A} \rightleftharpoons \mathrm{B + C} \)\( k_1 + k_{-1}([\mathrm{B}]_{\text{eq}} + [\mathrm{C}]_{\text{eq}}) \)
\( 2\mathrm{A} \rightleftharpoons \mathrm{A_2} \) (rate of dimerisation \( k_1[\mathrm{A}]^2 \))\( 4k_1[\mathrm{A}]_{\text{eq}} + k_{-1} \)

Plotting \( 1/\tau \) against \( ([\mathrm{A}]_{\text{eq}} + [\mathrm{B}]_{\text{eq}}) \) gives \( k_1 \) as slope and \( k_{-1} \) as intercept. Eigen used this to show that \( \mathrm{H^+ + OH^-} \rightarrow \mathrm{H_2O} \) in water has a rate constant of the order of \( 10^{11}\ \text{L mol}^{-1}\text{s}^{-1} \), among the fastest known bimolecular reactions in solution.

Parallel (Competing) Reactions

For \( \mathrm{A} \xrightarrow{k_1} \mathrm{B} \) and \( \mathrm{A} \xrightarrow{k_2} \mathrm{C} \), both first order:

$$[\mathrm{A}] = [\mathrm{A}]_0e^{-(k_1+k_2)t}, \qquad [\mathrm{B}] = \frac{k_1}{k_1+k_2}[\mathrm{A}]_0\left(1 - e^{-(k_1+k_2)t}\right)$$
Parallel first-order reactions
  • A decays with \( k = k_1 + k_2 \): \( t_{1/2} = 0.693/(k_1 + k_2) \).
  • At every time, \( [\mathrm{B}]/[\mathrm{C}] = k_1/k_2 \) (if neither was present initially).
  • Fraction of A ending as B: \( k_1/(k_1 + k_2) \).
  • Observed activation energy: \( E_{\text{obs}} = \dfrac{k_1E_1 + k_2E_2}{k_1 + k_2} \).

The constant product ratio is the basis of kinetic control: when products do not interconvert, their ratio reflects the relative rates, not their relative stabilities. Raising the temperature favours the path with the larger activation energy, since \( k_1/k_2 = (A_1/A_2)e^{-(E_1-E_2)/RT} \).

Consecutive Reactions

For \( \mathrm{A} \xrightarrow{k_1} \mathrm{B} \xrightarrow{k_2} \mathrm{C} \), with \( [\mathrm{A}]_0 = a \) and no B or C at the start:

$$[\mathrm{A}] = ae^{-k_1t}$$$$\boxed{[\mathrm{B}] = \frac{k_1a}{k_2 - k_1}\left(e^{-k_1t} - e^{-k_2t}\right)}$$$$[\mathrm{C}] = a\left[1 + \frac{k_1e^{-k_2t} - k_2e^{-k_1t}}{k_2 - k_1}\right]$$

Setting \( d[\mathrm{B}]/dt = 0 \):

$$\boxed{t_{\max} = \frac{\ln(k_1/k_2)}{k_1 - k_2}}, \qquad \boxed{[\mathrm{B}]_{\max} = a\left(\frac{k_1}{k_2}\right)^{k_2/(k_2 - k_1)}}$$
graph LR
    A["A
falls as e^(-k1 t)"] -->|"k1"| B["B
rises, peaks at t_max,
then falls"] B -->|"k2"| C["C
sigmoidal rise
(induction period)"]
LimitBehaviour
\( k_2 \gg k_1 \)B stays small and nearly constant: steady state. C forms with rate \( \approx k_1[\mathrm{A}] \): step 1 is rate-determining
\( k_1 \gg k_2 \)A converts almost completely to B first; C then forms with \( k_2 \): step 2 is rate-determining
\( k_1 = k_2 = k \)the general formula is 0/0; the limit is \( [\mathrm{B}] = akte^{-kt} \), \( t_{\max} = 1/k \), \( [\mathrm{B}]_{\max} = a/e \approx 0.368a \)

The symmetry trap. \( t_{\max} \) is symmetric in \( k_1 \) and \( k_2 \): swapping them gives the same \( t_{\max} \). \( [\mathrm{B}]_{\max} \) is not symmetric: a fast first step followed by a slow second step accumulates much more B than the reverse order.

Radioactive chains follow the same equations; transient and secular equilibrium are the \( k_2 > k_1 \) and \( k_2 \gg k_1 \) cases.

Simplifying Mechanisms

Exact integration fails for most real mechanisms. Three approximations do almost all the work.

1. The rate-determining step

If one step is much slower than all the steps after it, and the steps before it are effectively irreversible, the overall rate equals the rate of that step. The rate law then contains the species that enter the mechanism up to and including the rate-determining step (RDS).

The RDS is not simply “the step with the smallest rate constant”: rate constants of steps of different molecularity have different units and cannot be compared directly. It is the step whose rate limits the flux through the whole sequence.

2. Pre-equilibrium

If a fast reversible step precedes a slow step,

$$\mathrm{A + B} \underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}} \mathrm{I} \ (\text{fast}), \qquad \mathrm{I} \xrightarrow{k_2} \mathrm{P}\ (\text{slow}), \qquad k_{-1} \gg k_2,$$

then I is in equilibrium with A and B: \( [\mathrm{I}] = K_1[\mathrm{A}][\mathrm{B}] \), \( K_1 = k_1/k_{-1} \), and

$$v = k_2K_1[\mathrm{A}][\mathrm{B}] = \frac{k_1k_2}{k_{-1}}[\mathrm{A}][\mathrm{B}], \qquad E_{\text{obs}} = E_1 - E_{-1} + E_2 = \Delta H_1 + E_2$$

3. The steady-state approximation (SSA)

Steady-state approximation (Bodenstein)

After a short induction period, the concentration of a reactive intermediate is small and changes much more slowly than the concentrations of reactants and products, so its net rate of change may be set to zero:

\[ \frac{d[\mathrm{I}]}{dt} \approx 0 \]

It is valid when the intermediate is consumed much faster than it is formed (\( k_{\text{loss}} \gg k_{\text{formation}} \)), so its concentration stays small. It is not an assertion that [I] is zero, nor that it is constant for all time.

Recipe.

  1. Write \( d[\mathrm{I}]/dt \) for each intermediate (formation terms minus loss terms) and set each equal to zero.
  2. Solve the resulting algebraic equations for each [I] in terms of reactant (and product) concentrations.
  3. Substitute into the rate of formation of product (or loss of reactant).
  4. Check the limits: which term dominates at high and low concentrations?

A case where the order changes with concentration

Consider \( \mathrm{A} \underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}} \mathrm{I} + \mathrm{C} \), \( \mathrm{I + B} \xrightarrow{k_2} \mathrm{P} \) (an SN1-like scheme with a common product C). The SSA on I gives

$$v = \frac{k_1k_2[\mathrm{A}][\mathrm{B}]}{k_{-1}[\mathrm{C}] + k_2[\mathrm{B}]}$$
  • Large [B]: \( v = k_1[\mathrm{A}] \), first order, independent of B.
  • Large [C]: \( v = (k_1k_2/k_{-1})[\mathrm{A}][\mathrm{B}]/[\mathrm{C}] \): added C retards the reaction (the common-ion or mass-law effect).

A denominator with a sum of terms is the signature of a mechanism with an intermediate; the order is defined only in the limits.

How the Approximations Fit Together

graph TD
    M["Proposed mechanism"] --> Q{"Is there a fast
reversible step before
a slow step?"} Q -->|"yes, and k-1 >> k2"| PE["Pre-equilibrium:
[I] = K1 [A][B]"] Q -->|"intermediate reactive,
low concentration"| SS["Steady state:
d[I]/dt = 0"] Q -->|"one step far slower,
earlier steps irreversible"| RDS["Rate-determining step"] SS --> L["Take limits of the
SSA rate law"] L --> PE L --> RDS

Memory Tricks

Don’t Confuse

ThisvsThat
Steady state: \( d[\mathrm{I}]/dt \approx 0 \), I reactive and diluteEquilibrium: forward = reverse for every step
Pre-equilibrium: needs \( k_{-1} \gg k_2 \)RDS at step 1: needs \( k_2 \gg k_{-1} \)
\( 1/\tau \) for \( \mathrm{A} \rightleftharpoons \mathrm{B} \): \( k_1 + k_{-1} \)\( K = k_1/k_{-1} \)
Kinetic control: ratio = \( k_1/k_2 \)Thermodynamic control: ratio = K between products
\( t_{\max} \): symmetric in \( k_1, k_2 \)\( [\mathrm{B}]_{\max} \): not symmetric
Intermediate: at a potential-energy minimum, can in principle be detectedTransition state: at a maximum, lifetime of a vibration

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. For two parallel first-order reactions of A with \( k_1 = 2.0\times10^{-3} \) and \( k_2 = 6.0\times10^{-3}\ \text{s}^{-1} \), what fraction of A gives the first product?
  2. For \( \mathrm{A} \rightleftharpoons \mathrm{B} \) with \( k_1 = 4.0\times10^{-3} \) and \( k_{-1} = 1.0\times10^{-3}\ \text{s}^{-1} \), what is the relaxation time?
  3. State the condition under which the steady-state approximation is valid for an intermediate I.
Answers
  1. 0.25: \( 2/(2+6) \). The half-life of A is \( 0.693/(8.0\times10^{-3}) = 86.6 \) s.
  2. \( \tau = 1/(k_1 + k_{-1}) = 1/(5.0\times10^{-3}) = \) 200 s.
  3. I must be consumed much faster than it is formed, so that its concentration stays small and nearly constant after a short induction period.

Level 2: Part B Style

Practice Q1. For \( \mathrm{A} \xrightarrow{k_1} \mathrm{B} \xrightarrow{k_2} \mathrm{C} \) with \( k_1 = 0.10\ \text{min}^{-1} \) and \( k_2 = 0.05\ \text{min}^{-1} \), the time at which [B] is maximum and the maximum value of \( [\mathrm{B}]/[\mathrm{A}]_0 \) are:

(a) 6.9 min, 0.25 (b) 13.9 min, 0.50 (c) 13.9 min, 0.25 (d) 20 min, 0.37

Answer: (b)

\( t_{\max} = \ln(0.10/0.05)/(0.10 - 0.05) = 0.693/0.05 = 13.9 \) min. \( [\mathrm{B}]_{\max}/a = (k_1/k_2)^{k_2/(k_2-k_1)} = 2^{-1} = 0.50 \). Option (c) is the value for the swapped constants: same \( t_{\max} \), lower peak.

Practice Q2. For the mechanism \( \mathrm{A} \underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}} \mathrm{I} \), \( \mathrm{I + B} \xrightarrow{k_2} \mathrm{P} \), with I in steady state, the rate of formation of P is:

(a) \( k_1[\mathrm{A}] \) (b) \( \dfrac{k_1k_2[\mathrm{A}][\mathrm{B}]}{k_{-1} + k_2[\mathrm{B}]} \) (c) \( \dfrac{k_1k_2[\mathrm{A}][\mathrm{B}]}{k_{-1}} \) (d) \( \dfrac{k_1k_2[\mathrm{A}]}{k_{-1} + k_2} \)

Answer: (b)

\( d[\mathrm{I}]/dt = k_1[\mathrm{A}] - k_{-1}[\mathrm{I}] - k_2[\mathrm{I}][\mathrm{B}] = 0 \), so \( [\mathrm{I}] = k_1[\mathrm{A}]/(k_{-1} + k_2[\mathrm{B}]) \) and \( v = k_2[\mathrm{I}][\mathrm{B}] \). Options (a) and (c) are its high-[B] and low-[B] limits. Option (d) forgets that step 2 is bimolecular.

Practice Q3. In a temperature-jump experiment on \( \mathrm{A + B} \rightleftharpoons \mathrm{C} \), the relaxation time is 50 µs when \( [\mathrm{A}]_{\text{eq}} + [\mathrm{B}]_{\text{eq}} = 1.0 \) mM and 25 µs when it is 3.0 mM. The forward and reverse rate constants are:

(a) \( 1.0\times10^{7}\ \text{L mol}^{-1}\text{s}^{-1} \), \( 1.0\times10^{4}\ \text{s}^{-1} \) (b) \( 2.0\times10^{7}\ \text{L mol}^{-1}\text{s}^{-1} \), \( 1.0\times10^{4}\ \text{s}^{-1} \) (c) \( 1.0\times10^{7}\ \text{L mol}^{-1}\text{s}^{-1} \), \( 2.0\times10^{4}\ \text{s}^{-1} \) (d) \( 1.0\times10^{4}\ \text{L mol}^{-1}\text{s}^{-1} \), \( 1.0\times10^{7}\ \text{s}^{-1} \)

Answer: (a)

\( 1/\tau = 2.0\times10^{4} \) and \( 4.0\times10^{4}\ \text{s}^{-1} \). Slope \( k_1 = (4.0 - 2.0)\times10^{4}/(2.0\times10^{-3}\ \text{M}) = 1.0\times10^{7}\ \text{L mol}^{-1}\text{s}^{-1} \). Intercept \( k_{-1} = 2.0\times10^{4} - 1.0\times10^{7}\times1.0\times10^{-3} = 1.0\times10^{4}\ \text{s}^{-1} \). So \( K = 1.0\times10^{3}\ \text{L mol}^{-1} \).

Practice Q4. For \( \mathrm{A} \xrightarrow{k} \mathrm{B} \xrightarrow{k} \mathrm{C} \) (equal rate constants), the maximum fraction of A present as B is:

(a) 0.25 (b) 0.37 (c) 0.50 (d) 0.69

Answer: (b)

With \( k_1 = k_2 = k \), \( [\mathrm{B}] = akte^{-kt} \), maximal at \( t = 1/k \), where \( [\mathrm{B}] = a/e = 0.368a \).

Level 3: Part C Style

Practice Q5. For \( \mathrm{A} \underset{k_{-1}}{\overset{k_1}{\rightleftharpoons}} \mathrm{I} + \mathrm{C} \), \( \mathrm{I + B} \xrightarrow{k_2} \mathrm{P} \), with I in steady state, consider:

  1. The rate law is \( v = \dfrac{k_1k_2[\mathrm{A}][\mathrm{B}]}{k_{-1}[\mathrm{C}] + k_2[\mathrm{B}]} \).
  2. At high [B] the reaction is first order in A and zero order in B.
  3. Adding C to the reaction mixture increases the rate.
  4. When \( k_{-1}[\mathrm{C}] \gg k_2[\mathrm{B}] \), the observed activation energy is \( E_1 - E_{-1} + E_2 \).

Which are correct?

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. \( d[\mathrm{I}]/dt = k_1[\mathrm{A}] - k_{-1}[\mathrm{I}][\mathrm{C}] - k_2[\mathrm{I}][\mathrm{B}] = 0 \) gives \( [\mathrm{I}] = k_1[\mathrm{A}]/(k_{-1}[\mathrm{C}] + k_2[\mathrm{B}]) \); multiply by \( k_2[\mathrm{B}] \). Correct.
  2. If \( k_2[\mathrm{B}] \gg k_{-1}[\mathrm{C}] \), \( v = k_1[\mathrm{A}] \). Correct.
  3. C appears only in the denominator: added C retards the reaction (mass-law effect). Wrong.
  4. In that limit \( v = (k_1k_2/k_{-1})[\mathrm{A}][\mathrm{B}]/[\mathrm{C}] \), so \( E = E_1 + E_2 - E_{-1} \). Correct.

Practice Q6. A reacts by two parallel first-order paths: to B with \( A_1 = 1.0\times10^{10}\ \text{s}^{-1} \), \( E_1 = 60 \) kJ/mol, and to C with \( A_2 = 1.0\times10^{13}\ \text{s}^{-1} \), \( E_2 = 80 \) kJ/mol. Which statements are correct? (R = 8.314 J K⁻¹ mol⁻¹)

  1. At 300 K, \( [\mathrm{B}]/[\mathrm{C}] \) is about 3.
  2. At 400 K, more C than B is formed.
  3. The temperature at which B and C form equally is about 348 K.
  4. The ratio \( [\mathrm{B}]/[\mathrm{C}] \) changes during a single run at constant temperature.

(a) 1 and 4 only (b) 1, 2 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only

\( k_1/k_2 = (A_1/A_2)e^{(E_2-E_1)/RT} = 10^{-3}e^{20000/RT} \).

  1. At 300 K, \( e^{8.018} = 3036 \); ratio = 3.04. Correct.
  2. At 400 K, \( e^{6.014} = 409 \); ratio = 0.41 < 1, so C dominates. Correct.
  3. Ratio 1 when \( 20000/RT = \ln 1000 = 6.908 \): \( T = 20000/(8.314\times6.908) = 348 \) K. Correct.
  4. For parallel first-order paths with no B or C initially, \( [\mathrm{B}]/[\mathrm{C}] = k_1/k_2 \) at all times. Wrong.

Practice Q7. A reaction \( 2\mathrm{A + B} \rightarrow \mathrm{P} \) follows \( v = k[\mathrm{A}]^2[\mathrm{B}] \) and its rate constant falls as temperature rises. Which mechanisms are consistent with both observations?

  1. One termolecular elementary step \( 2\mathrm{A + B} \rightarrow \mathrm{P} \) with a positive barrier.
  2. \( 2\mathrm{A} \rightleftharpoons \mathrm{A_2} \) (fast, \( \Delta H = -60 \) kJ/mol), then \( \mathrm{A_2 + B} \rightarrow \mathrm{P} \) (slow, \( E = 10 \) kJ/mol).
  3. \( \mathrm{A + B} \rightleftharpoons \mathrm{AB} \) (fast, \( \Delta H = -20 \) kJ/mol), then \( \mathrm{AB + A} \rightarrow \mathrm{P} \) (slow, \( E = 40 \) kJ/mol).
  4. \( \mathrm{A + B} \rightleftharpoons \mathrm{AB} \) (fast, \( \Delta H = -45 \) kJ/mol), then \( \mathrm{AB + A} \rightarrow \mathrm{P} \) (slow, \( E = 15 \) kJ/mol).

(a) 2 and 4 only (b) 1, 2 and 4 only (c) 2, 3 and 4 only (d) 2 only

Answer: (a) 2 and 4 only

All four give \( v \propto [\mathrm{A}]^2[\mathrm{B}] \). The temperature dependence decides.

  1. A positive barrier means k rises with T. Inconsistent.
  2. \( E_{\text{obs}} = -60 + 10 = -50 \) kJ/mol. Consistent.
  3. \( E_{\text{obs}} = -20 + 40 = +20 \) kJ/mol, k rises with T. Inconsistent.
  4. \( E_{\text{obs}} = -45 + 15 = -30 \) kJ/mol. Consistent.

Quick Revision Table

SchemeKey result
\( \mathrm{A} \rightleftharpoons \mathrm{B} \)\( k_{\text{obs}} = 1/\tau = k_1 + k_{-1} \); \( K = k_1/k_{-1} \)
\( \mathrm{A + B} \rightleftharpoons \mathrm{C} \) relaxation\( 1/\tau = k_1([\mathrm{A}]_{\text{eq}} + [\mathrm{B}]_{\text{eq}}) + k_{-1} \)
\( 2\mathrm{A} \rightleftharpoons \mathrm{A_2} \) relaxation\( 1/\tau = 4k_1[\mathrm{A}]_{\text{eq}} + k_{-1} \)
Parallel\( k = k_1 + k_2 \); \( [\mathrm{B}]/[\mathrm{C}] = k_1/k_2 \); \( E = \sum k_iE_i/\sum k_i \)
Consecutive\( [\mathrm{B}] = \frac{k_1a}{k_2-k_1}(e^{-k_1t} - e^{-k_2t}) \)
\( t_{\max} \), \( [\mathrm{B}]_{\max} \)\( \ln(k_1/k_2)/(k_1-k_2) \); \( a(k_1/k_2)^{k_2/(k_2-k_1)} \)
Equal k\( t_{\max} = 1/k \), \( [\mathrm{B}]_{\max} = a/e \)
Pre-equilibrium\( v = K_1k_2[\ldots] \); \( E = \Delta H_1 + E_2 \) (can be negative)
SSA\( d[\mathrm{I}]/dt = 0 \); for \( \mathrm{A + B} \rightleftharpoons \mathrm{I} \rightarrow \mathrm{P} \): \( v = \frac{k_1k_2}{k_{-1}+k_2}[\mathrm{A}][\mathrm{B}] \)
Sum in denominatororder changes with concentration; mass-law retardation by a product

Key Takeaways

What’s Next