Ionisation Energy and Electron Affinity
CSIR NET chemistry: first and successive ionisation energies, the Be/B and N/O breaks, group anomalies, electron affinity trends and sign conventions.
- 15 min
On this page · 14 sections
Prerequisites
- Electronic Configuration, Shielding and Effective Nuclear Charge: penetration, exchange and \( Z_{\text{eff}} \) explain every anomaly below.
- Atomic and Ionic Radii: the d-block and lanthanide contractions reappear here as ionisation-energy anomalies.
- The hydrogen-atom energy \( E_n = -13.6\,Z^2/n^2 \) eV, from the quantum-chemistry units (overlapping with Physical Sciences).
The Hook: Bartlett’s Reasoning
Definitions and Units
Ionisation is always endothermic: \( I > 0 \). Strictly, \( I \) is an internal-energy change at 0 K; the corresponding enthalpy at 298 K is larger by about \( \frac{5}{2}RT \approx 6 \) kJ mol⁻¹, a difference that never matters at exam precision. “Ionisation enthalpy” in Indian school texts is the same quantity for exam purposes.
Hydrogen: \( I_1 = 13.6 \) eV \( = 1312 \) kJ mol⁻¹.
Hydrogen-like ions
For a one-electron species with nuclear charge \( Z \), the Bohr/Schrödinger result gives
$$\boxed{I = 13.6\,\frac{Z^2}{n^2}\ \text{eV}}$$So He⁺ has \( I = 13.6 \times 4 = 54.4 \) eV (about 5248 kJ mol⁻¹, which is the second ionisation energy of helium), and Li²⁺ has \( 13.6 \times 9 = 122.4 \) eV (about 11 810 kJ mol⁻¹, the third ionisation energy of lithium). These are exact for one-electron ions apart from small corrections, and they make good Part C arithmetic.
First Ionisation Energy Across a Period
\( I_1 \) generally rises across a period because \( Z_{\text{eff}} \) rises and the atom shrinks. The rise is not smooth:
| Period 2 | Li | Be | B | C | N | O | F | Ne |
|---|---|---|---|---|---|---|---|---|
| \( I_1 \) (kJ mol⁻¹) | 520 | 899 | 801 | 1086 | 1402 | 1314 | 1681 | 2081 |
| Period 3 | Na | Mg | Al | Si | P | S | Cl | Ar |
|---|---|---|---|---|---|---|---|---|
| \( I_1 \) (kJ mol⁻¹) | 496 | 738 | 578 | 787 | 1012 | 1000 | 1251 | 1521 |
Break 1: group 2 > group 13 (Be > B, Mg > Al)
Boron’s outermost electron is in 2p; beryllium’s is in 2s. A 2p electron penetrates the 1s² core less than a 2s electron does, so it is less tightly held, even though boron has the larger nuclear charge. The same argument gives Mg > Al.
Break 2: group 15 > group 16 (N > O, P > S)
Nitrogen is \( 2p^3 \): three parallel spins in three orbitals, with maximum exchange stabilisation. Oxygen is \( 2p^4 \): the fourth electron must pair in an occupied orbital. Removing it relieves the pairing repulsion and leaves a half-filled \( 2p^3 \) ion, so oxygen’s \( I_1 \) is lower than nitrogen’s. The same applies to P and S, with a much smaller gap (1012 against 1000 kJ mol⁻¹) because the larger 3p orbitals reduce the pairing repulsion.
First Ionisation Energy Down a Group
\( I_1 \) generally falls down a group: the valence electron is further out and \( Z_{\text{eff}} \) changes little. Group 1 runs Li 520, Na 496, K 419, Rb 403, Cs 376 kJ mol⁻¹. The exceptions all come from poor shielding by a newly filled d or f shell.
| Group | Values (kJ mol⁻¹) | What breaks the trend |
|---|---|---|
| 13 | B 801, Al 578, Ga 579, In 558, Tl 589 | Ga ≈ Al (3d contraction); Tl > In (4f contraction plus relativistic 6s stabilisation) |
| 14 | C 1086, Si 787, Ge 762, Sn 709, Pb 716 | Pb > Sn |
| 11 | Cu 745, Ag 731, Au 890 | Au far above Ag |
| 12 | Zn 906, Cd 868, Hg 1007 | Hg the highest of the group |
The 6s electrons of the heavy post-lanthanide elements are held unusually tightly. Two effects add: the 4f and 5d electrons shield poorly, and relativistic effects contract and stabilise s orbitals in heavy atoms. The same stabilisation underlies the inert pair effect (Tl⁺, Pb²⁺, Bi³⁺ preferred over the group oxidation states), mercury’s liquidity and the nobility of gold. See Electronegativity and Periodic Anomalies.
Extremes
- Highest \( I_1 \) of all elements: He (2372 kJ mol⁻¹), then Ne (2081).
- Lowest \( I_1 \) among the common elements: Cs (376 kJ mol⁻¹).
- Among the halogens, F (1681) is the highest; fluorine is very hard to oxidise to a positive state.
Successive Ionisation Energies
\( I_1 < I_2 < I_3 < \ldots \) for every element: each electron is removed from an increasingly positive ion. The large jump comes when the next electron must be taken from a noble-gas core, and it identifies the group.
| Element | \( I_1 \) | \( I_2 \) | \( I_3 \) | \( I_4 \) | Jump after |
|---|---|---|---|---|---|
| Na | 496 | 4562 | \( I_1 \): group 1 | ||
| Mg | 738 | 1451 | 7733 | \( I_2 \): group 2 | |
| Al | 578 | 1817 | 2745 | 11 577 | \( I_3 \): group 13 |
| B | 801 | 2427 | 3660 | 25 026 | \( I_3 \): group 13 |
Successive ionisation energies also explain stable oxidation states. Magnesium forms Mg²⁺ and not Mg⁺ in solids, although \( I_2 \) is twice \( I_1 \), because the extra lattice and hydration energy of a 2+ ion repays \( I_2 \). It does not form Mg³⁺: \( I_3 \) is more than five times \( I_2 \) and nothing can repay it.
Electron Affinity
Read the sign convention of every question before answering. “Highest electron affinity” means the most energy released, which is the most negative electron-gain enthalpy.
Values to know (energy released, kJ mol⁻¹)
| Group 1 | Group 14 | Group 15 | Group 16 | Group 17 | |||||
|---|---|---|---|---|---|---|---|---|---|
| H | 73 | C | 122 | N | ≈ 0 or negative | O | 141 | F | 328 |
| Li | 60 | Si | 134 | P | 72 | S | 200 | Cl | 349 |
| Na | 53 | Br | 325 | ||||||
| K | 48 | I | 295 |
Other elements with no stable gaseous anion (negative or near-zero electron affinity): Be, Mg and the noble gases, whose next electron would have to enter a new, poorly penetrating subshell. Gold is notable for its large value (about 223 kJ mol⁻¹), larger than oxygen’s; this is why salts such as CsAu, containing the auride ion Au⁻, exist.
Trends and the second-row anomaly
- Across a period \( E_{\text{ea}} \) generally rises towards the halogens, with dips at group 2 (filled ns), group 15 (half-filled np: N has essentially none) and group 18.
- Down a group \( E_{\text{ea}} \) generally falls, except between the second and third periods:
Fluorine is still the stronger oxidising agent in water and the more electronegative element. Electron affinity is a single gas-phase step; oxidising power also includes the F–F bond energy (low, 158 kJ mol⁻¹, against 242 for Cl–Cl) and the hydration energy of F⁻ (large, because F⁻ is small).
Second electron affinities
Adding a second electron to an anion is always endothermic: \( \text{O}^-\text{(g)} + e^- \rightarrow \text{O}^{2-}\text{(g)} \) absorbs a large amount of energy. Free O²⁻ is unstable in the gas phase. Oxides exist because the lattice energy of a crystal containing O²⁻ more than repays the cost.
No gas-phase ion pair forms spontaneously
The lowest \( I_1 \) among stable elements is Cs (376 kJ mol⁻¹); the highest \( E_{\text{ea}} \) is Cl (349 kJ mol⁻¹). Even for this best pair, \( \text{Cs(g)} + \text{Cl(g)} \rightarrow \text{Cs}^+\text{(g)} + \text{Cl}^-\text{(g)} \) costs about \( 376 - 349 = 27 \) kJ mol⁻¹. Ionic compounds are stable only because of the Coulomb attraction of the ions (in an ion pair or a lattice), not because electron transfer between isolated atoms pays for itself.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Highest \( I_1 \): He | highest \( E_{\text{ea}} \): Cl | |
| Electron affinity positive = energy released | \( \Delta_{\text{eg}}H \) negative = energy released | |
| F has the higher electronegativity | Cl has the higher electron affinity | |
| Be > B: 2s versus 2p penetration | N > O: half-filled \( p^3 \) and pairing in \( p^4 \) | |
| Tl > In, Pb > Sn, Au > Ag, Hg > Cd: poor 4f shielding + relativity | Ga ≈ Al: poor 3d shielding |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which has the higher first ionisation energy, N or O?
- Which element has the highest electron affinity?
- What is the ionisation energy of He⁺ in eV?
Answers
- N (1402 against 1314 kJ mol⁻¹): half-filled \( 2p^3 \) against paired \( 2p^4 \).
- Chlorine (349 kJ mol⁻¹).
- 54.4 eV. \( 13.6 \times 2^2/1^2 \).
Level 2: Part B Style
Practice Q1. The correct order of first ionisation energy is:
(a) B < Be < C < O < N (b) Be < B < C < N < O (c) B < Be < O < C < N (d) Be < B < O < C < N
Answer: (a)
Values: B 801 < Be 899 < C 1086 < O 1314 < N 1402 kJ mol⁻¹.
- Be above B: the 2p electron of boron penetrates less than the 2s electron of beryllium.
- N above O: half-filled \( 2p^3 \) against paired \( 2p^4 \).
- C is still below O: the N/O reversal is the only break among C, N and O.
Option (b) is the smooth atomic-number trend; (c) wrongly puts O below C; (d) misses the Be/B break.
Practice Q2. An element X has successive ionisation energies (kJ mol⁻¹) of 578, 1817, 2745, 11 577 and 14 842. The formula of its oxide is most likely:
(a) XO (b) X₂O (c) X₂O₃ (d) XO₂
Answer: (c) X₂O₃
The jump is between \( I_3 \) (2745) and \( I_4 \) (11 577), a factor of about 4.2. Three valence electrons: group 13, X³⁺, oxide X₂O₃. These are aluminium’s values.
Practice Q3. In group 13, the element with the highest first ionisation energy after boron is:
(a) Al (b) Ga (c) In (d) Tl
Answer: (d) Tl
Values: Al 578, Ga 579, In 558, Tl 589 kJ mol⁻¹. Thallium’s 6s electron is held tightly because the 4f and 5d electrons shield poorly and relativistic effects stabilise the 6s orbital.
Practice Q4. Which of the following pairs is ordered correctly by electron affinity (energy released)?
(a) F > Cl (b) O > S (c) Cl > Br (d) N > P
Answer: (c) Cl > Br
Cl 349 > Br 325 kJ mol⁻¹ follows the normal group trend. The other three are reversed by the second-row anomaly: Cl > F, S > O and P > N.
Level 3: Part C Style
Practice Q5. The third ionisation energy of lithium, in kJ mol⁻¹, is closest to:
(a) 5250 (b) 7300 (c) 11 800 (d) 20 990
Answer: (c) 11 800
After two electrons are removed, Li²⁺ is a one-electron ion with \( Z = 3 \):
\( I_3 = 13.6 \times \frac{3^2}{1^2} = 122.4 \) eV; \( 122.4 \times 96.485 \approx 11\,810 \) kJ mol⁻¹.
(a) is He⁺ (\( Z = 2 \)); (d) is Be³⁺ (\( Z = 4 \)); (b) is roughly the second ionisation energy of lithium, a two-electron problem that the formula cannot solve.
Practice Q6. The longest wavelength of light that can ionise a gaseous sodium atom (\( I_1 = 496 \) kJ mol⁻¹) is closest to: (use \( h = 6.626 \times 10^{-34} \) J s, \( c = 3.00 \times 10^8 \) m s⁻¹, \( N_A = 6.022 \times 10^{23} \) mol⁻¹)
(a) 121 nm (b) 241 nm (c) 362 nm (d) 589 nm
Answer: (b) 241 nm
Energy per atom: \( \frac{496 \times 10^3}{6.022 \times 10^{23}} = 8.24 \times 10^{-19} \) J.
\( \lambda = \frac{hc}{E} = \frac{6.626 \times 10^{-34} \times 3.00 \times 10^8}{8.24 \times 10^{-19}} = 2.41 \times 10^{-7} \) m \( = 241 \) nm.
Option (d), 589 nm, is the sodium D line: it excites 3s → 3p, it does not ionise.
Practice Q7. Consider the statements:
- The first ionisation energy of Hg is higher than that of Cd.
- Gaseous Cs and Cl atoms transfer an electron spontaneously to form Cs⁺ and Cl⁻.
- The second electron affinity of oxygen is endothermic.
- Phosphorus has a higher first ionisation energy than sulfur.
Which are correct?
(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 3 and 4 only
Answer: (a) 1, 3 and 4 only
- Correct. Hg 1007 against Cd 868 kJ mol⁻¹.
- Wrong. \( I_1(\text{Cs}) - E_{\text{ea}}(\text{Cl}) = 376 - 349 = +27 \) kJ mol⁻¹: still uphill. No pair of isolated atoms transfers an electron spontaneously.
- Correct. Adding an electron to O⁻ costs energy; O²⁻ exists only in a lattice or solvated environment.
- Correct. P (1012) > S (1000): half-filled \( 3p^3 \) against paired \( 3p^4 \).
Quick Revision Table
| Idea | Fact |
|---|---|
| Units | 1 eV = 96.485 kJ mol⁻¹; H: 13.6 eV = 1312 kJ mol⁻¹ |
| One-electron ion | \( I = 13.6\,Z^2/n^2 \) eV (He⁺ 54.4, Li²⁺ 122.4 eV) |
| Period 2 \( I_1 \) order | Li < B < Be < C < O < N < F < Ne |
| Be > B | 2s penetrates more than 2p |
| N > O | half-filled \( p^3 \); pairing in \( p^4 \) |
| Group anomalies | Ga ≈ Al; Tl > In; Pb > Sn; Au > Ag; Hg > Zn > Cd |
| Highest \( I_1 \) | He (2372 kJ mol⁻¹) |
| Successive IEs | big jump marks the core; count electrons before it for the group |
| Highest \( E_{\text{ea}} \) | Cl (349), then F (328), Br (325) |
| Second-row anomaly | Cl > F, S > O, P > N, Si > C |
| No stable anion | Be, Mg, N (≈ 0), noble gases |
| Second EA | always endothermic (O²⁻ needs a lattice) |
Key Takeaways
What’s Next
- Electronegativity and Periodic Anomalies: Mulliken’s scale averages ionisation energy and electron affinity.
- Chemical Periodicity: Quick Revision.
- Ionisation energies set orbital energies in molecular orbital diagrams: Bonding in Homonuclear Molecules.
- Unit conversion and ratio arithmetic practice: Numerical Ability.