Ideal and Real Gases
CSIR NET chemistry: compression factor, van der Waals and virial equations, critical constants, Boyle and inversion temperatures, Joule–Thomson and fugacity.
- 17 min
On this page · 15 sections
Prerequisites
- Laws of Thermodynamics, State and Path Functions: ideal-gas \( C_P - C_V = R \), free expansion and adiabatic work.
- Thermodynamic Potentials, Maxwell’s Relations and Spontaneity: \( \pi_T = T(\partial P/\partial T)_V - P \) and the general Joule–Thomson coefficient.
- Phase Transitions, Phase Equilibria and the Phase Rule: the critical point as the end of the liquid–vapour line.
The Hook: Linde’s Air Liquefier
The Ideal Gas
$$PV = nRT, \qquad R = 8.314\ \text{J K}^{-1}\,\text{mol}^{-1} = 0.08314\ \text{dm}^3\,\text{bar K}^{-1}\,\text{mol}^{-1} = 0.08206\ \text{dm}^3\,\text{atm K}^{-1}\,\text{mol}^{-1}$$Model assumptions: point molecules (no volume) and no intermolecular forces except during perfectly elastic collisions. Every real gas approaches this model as \( P \to 0 \). Consequences you have already used:
- \( U \) and \( H \) depend on \( T \) only (\( \pi_T = 0 \), \( \mu_{\text{JT}} = 0 \)).
- Dalton’s law: \( P = \sum_i P_i \) with \( P_i = x_i P \). Amagat’s law: \( V = \sum_i V_i \) at the same \( T \) and \( P \).
- The molecular picture (Maxwell–Boltzmann speeds, \( PV = \tfrac{1}{3}Nm\overline{c^2} \)) belongs to the kinetic theory of gases, a line of the statistical thermodynamics unit.
The Compression Factor
$$Z = \frac{PV_m}{RT}$$| \( Z \) | Meaning |
|---|---|
| \( Z = 1 \) | ideal behaviour (or attractive and repulsive effects cancel) |
| \( Z < 1 \) | gas more compressible than ideal: attractions dominate |
| \( Z > 1 \) | gas less compressible than ideal: repulsions (finite size) dominate |
At 273 K, H₂ and He show \( Z > 1 \) at all pressures (their attractions are weak and they are above their Boyle temperatures), while CH₄, CO₂ and NH₃ first dip below 1 and then rise above 1 at high pressure. As \( T \) rises, the dip shrinks; at the Boyle temperature the curve leaves \( Z = 1 \) with zero slope.
The van der Waals Equation
$$\boxed{\left(P + \frac{a n^2}{V^2}\right)(V - nb) = nRT}, \qquad P = \frac{RT}{V_m - b} - \frac{a}{V_m^2}$$- \( b \) (excluded volume per mole) corrects for molecular size. For hard spheres of diameter \( \sigma \), the excluded volume per pair is \( \tfrac{4}{3}\pi\sigma^3 \), so \( b = \tfrac{2}{3}\pi N_A\sigma^3 \), four times the actual volume of the molecules.
- \( a/V_m^2 \) (internal pressure) corrects for attraction: molecules near the wall are pulled back, reducing the pressure in proportion to the square of the number density.
- Larger \( a \) means stronger attraction, an easier gas to liquefy and a higher critical temperature.
Critical constants
Below \( T_c \) a van der Waals isotherm has a loop (a maximum and a minimum). At \( T_c \) these merge into a point of inflection with a horizontal tangent: \( (\partial P/\partial V_m)_T = 0 \) and \( (\partial^2 P/\partial V_m^2)_T = 0 \). Solving:
$$\boxed{V_c = 3b, \qquad T_c = \frac{8a}{27Rb}, \qquad P_c = \frac{a}{27b^2}}, \qquad Z_c = \frac{P_cV_c}{RT_c} = \frac{3}{8} = 0.375$$Inverted, using the more reliably measured \( T_c \) and \( P_c \):
$$a = \frac{27R^2T_c^2}{64P_c}, \qquad b = \frac{RT_c}{8P_c}$$Most simple real gases have \( Z_c \) of roughly 0.27–0.31 (strongly polar molecules lie lower: water is about 0.23), so the van der Waals equation gives the right form, not exact numbers.
Below the critical temperature: Maxwell’s equal-area construction
The van der Waals loop includes a region where \( (\partial P/\partial V)_T > 0 \), which is mechanically unstable. The real isotherm replaces the loop with a horizontal line (liquid and vapour coexisting at the vapour pressure), drawn so that the two areas it cuts off from the loop are equal. That condition is the same as equal chemical potential of liquid and vapour. The parts of the loop between the horizontal line and the extrema represent metastable superheated liquid and supercooled vapour.
Above \( T_c \), no pressure liquefies the gas, and one can pass from gas to liquid continuously by going round the critical point (continuity of states), as Andrews’s isotherms for CO₂ showed.
Reduced variables and corresponding states
With \( P_r = P/P_c \), \( V_r = V_m/V_c \), \( T_r = T/T_c \), the van der Waals equation loses its constants:
$$\left(P_r + \frac{3}{V_r^2}\right)(3V_r - 1) = 8T_r$$Law of corresponding states: gases at the same reduced temperature and pressure have approximately the same \( Z \). This is why generalised compressibility charts work for many gases.
Other two-parameter equations (for recognition)
| Equation | Form | \( Z_c \) |
|---|---|---|
| van der Waals | \( P = \dfrac{RT}{V_m - b} - \dfrac{a}{V_m^2} \) | 3/8 = 0.375 |
| Dieterici | \( P = \dfrac{RT}{V_m - b}\,e^{-a/RTV_m} \) | \( 2/e^2 \approx 0.271 \) |
| Berthelot | \( P = \dfrac{RT}{V_m - b} - \dfrac{a}{TV_m^2} \) | 3/8 |
The Virial Equation
$$Z = 1 + \frac{B}{V_m} + \frac{C}{V_m^2} + \cdots \qquad \text{or} \qquad Z = 1 + B'P + C'P^2 + \cdots, \quad B' = \frac{B}{RT}$$The virial coefficients \( B(T), C(T), \ldots \) depend only on temperature; \( B \) reflects interactions between pairs of molecules, \( C \) among triples. Statistical mechanics relates \( B \) to the intermolecular potential.
Expanding the van der Waals equation in powers of \( 1/V_m \):
$$Z = \frac{V_m}{V_m - b} - \frac{a}{RTV_m} = 1 + \left(b - \frac{a}{RT}\right)\frac{1}{V_m} + \frac{b^2}{V_m^2} + \cdots$$$$\boxed{B = b - \frac{a}{RT}}, \qquad C = b^2$$- At low \( T \), \( B < 0 \) (attraction wins, \( Z < 1 \) at low pressure).
- At high \( T \), \( B > 0 \).
- Boyle temperature: \( B(T_B) = 0 \), so the gas obeys Boyle’s law over an extended low-pressure range:
The Joule and Joule–Thomson Experiments
| Joule (free expansion) | Joule–Thomson (throttling) | |
|---|---|---|
| Set-up | gas expands into a vacuum | gas forced steadily through a porous plug or valve from \( P_1 \) to \( P_2 \), insulated |
| Constant | \( U \) | \( H \) |
| Coefficient | \( (\partial T/\partial V)_U \) | \( \mu_{\text{JT}} = (\partial T/\partial P)_H \) |
| Ideal gas | no temperature change | no temperature change |
Why throttling is isenthalpic. Push a volume \( V_1 \) through the plug at \( P_1 \): work done on the gas \( P_1V_1 \). It emerges occupying \( V_2 \) at \( P_2 \): work done by the gas \( P_2V_2 \). With \( q = 0 \): \( U_2 - U_1 = P_1V_1 - P_2V_2 \), so \( U_1 + P_1V_1 = U_2 + P_2V_2 \): \( H_1 = H_2 \).
From the Maxwell relations page:
$$\mu_{\text{JT}} = \frac{T(\partial V/\partial T)_P - V}{C_P}$$For a van der Waals gas at low pressure this reduces to
$$\boxed{\mu_{\text{JT}} \approx \frac{1}{C_{P,m}}\left(\frac{2a}{RT} - b\right)}$$- \( \mu_{\text{JT}} > 0 \): the gas cools on expansion (pressure falls, temperature falls). Attraction dominates.
- \( \mu_{\text{JT}} < 0 \): the gas warms on expansion. Repulsion dominates.
- Inversion temperature (low-pressure limit): \( \mu_{\text{JT}} = 0 \) at
Most gases (N₂, O₂, CO₂, air) have inversion temperatures far above room temperature and cool on throttling. H₂ and He have inversion temperatures well below room temperature: they must be pre-cooled (H₂ with liquid nitrogen, He with liquid hydrogen or by adiabatic expansion with work) before a Linde stage will liquefy them. In reality \( T_i \) depends on pressure (an inversion curve), and the van der Waals estimate is rough.
Fugacity
For an ideal gas, \( \mu = \mu^\circ + RT\ln(P/P^\circ) \). For a real gas, keep the same form and replace \( P \) with an effective pressure \( f \), the fugacity:
$$\mu = \mu^\circ + RT\ln\frac{f}{P^\circ}, \qquad f = \phi P, \qquad \lim_{P \to 0}\phi = 1$$The standard state is the hypothetical ideal gas at 1 bar. From \( (\partial\mu/\partial P)_T = V_m \):
$$\boxed{\ln\phi = \int_0^P \frac{Z - 1}{P}\,dP}$$With the virial expansion truncated after \( B \): \( \ln\phi \approx \dfrac{BP}{RT} \).
- \( \phi < 1 \) when attractions dominate (\( Z < 1 \), \( B < 0 \)): the gas has a lower escaping tendency than an ideal gas at the same pressure.
- \( \phi > 1 \) when repulsions dominate.
- Equilibrium constants of real-gas reactions are written with fugacities, \( K = \prod (f_J/P^\circ)^{\nu_J} \).
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Boyle temperature \( T_B = a/Rb \): \( B = 0 \) | Inversion temperature \( T_i = 2a/Rb \): \( \mu_{\text{JT}} = 0 \) | |
| Critical temperature: highest \( T \) for liquefaction by pressure | Boyle temperature: ideal-like behaviour at low pressure | |
| Joule expansion: constant \( U \) | Joule–Thomson: constant \( H \) | |
| \( Z < 1 \): attractions dominate | \( Z > 1 \): repulsions dominate | |
| \( B \) (volume series), units of volume per mole | \( B' = B/RT \) (pressure series), units of 1/pressure | |
| Fugacity coefficient \( \phi = f/P \) (gases) | Activity coefficient \( \gamma = a/x \) (solutions) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Take \( R = 8.314 \) J K⁻¹ mol⁻¹.
Level 1: Foundation
- What is the critical compression factor of a van der Waals gas?
- Define the Boyle temperature in terms of the second virial coefficient.
- What is \( \mu_{\text{JT}} \) of an ideal gas?
Answers
- \( Z_c = 3/8 = 0.375 \).
- The temperature at which \( B(T) = 0 \); for a van der Waals gas \( T_B = a/Rb \).
- Zero. \( T(\partial V/\partial T)_P - V = T(nR/P) - V = 0 \).
Level 2: Part B Style
Practice Q1. A van der Waals gas has \( a = 0.364 \) Pa m⁶ mol⁻² and \( b = 4.27 \times 10^{-5} \) m³ mol⁻¹. Its critical temperature and pressure are closest to:
(a) 304 K, 73.9 bar (b) 1025 K, 73.9 bar (c) 304 K, 7.39 bar (d) 114 K, 200 bar
Answer: (a)
\( T_c = \dfrac{8a}{27Rb} = \dfrac{8 \times 0.364}{27 \times 8.314 \times 4.27 \times 10^{-5}} = 303.8 \) K.
\( P_c = \dfrac{a}{27b^2} = \dfrac{0.364}{27 \times (4.27 \times 10^{-5})^2} = 7.39 \times 10^6 \) Pa \( = 73.9 \) bar.
(b) gives the Boyle temperature \( a/Rb \) in place of \( T_c \); (c) slips a factor of ten in the Pa → bar conversion.
Practice Q2. For a van der Waals gas, the ratio \( T_B/T_c \) is:
(a) 8/27 (b) 3/8 (c) 27/8 (d) 2
Answer: (c) 27/8
\( T_B/T_c = \dfrac{a/Rb}{8a/27Rb} = \dfrac{27}{8} = 3.375 \). (d) is \( T_i/T_B \); (b) is \( Z_c \).
Practice Q3. For a real gas at low pressure and a temperature below its Boyle temperature, which is correct?
(a) \( Z > 1 \) and \( B > 0 \) (b) \( Z < 1 \) and \( B < 0 \) (c) \( Z = 1 \) at all pressures (d) \( Z < 1 \) and \( B > 0 \)
Answer: (b)
Below \( T_B \), \( B = b - a/RT < 0 \), and \( Z \approx 1 + B/V_m < 1 \): attractions dominate at low pressure. At high pressure the \( b^2/V_m^2 \) and higher terms take over and \( Z \) eventually exceeds 1.
Practice Q4. Which gas warms when it undergoes a Joule–Thomson expansion starting at room temperature?
(a) N₂ (b) CO₂ (c) He (d) NH₃
Answer: (c) He
Helium’s attractions are so weak (small \( a \)) that its inversion temperature lies far below room temperature; at 298 K \( \mu_{\text{JT}} < 0 \) and it warms. N₂, CO₂ and NH₃ have inversion temperatures well above 298 K and cool. H₂ behaves like He.
Level 3: Part C Style
Practice Q5. A gas has \( T_c = 200 \) K and \( P_c = 50.0 \) bar. Treating it as a van der Waals gas, which statements are correct?
- \( a \approx 0.233 \) Pa m⁶ mol⁻².
- \( b \approx 4.16 \times 10^{-5} \) m³ mol⁻¹.
- Its Boyle temperature is 675 K.
- Its critical molar volume is \( 4.16 \times 10^{-5} \) m³ mol⁻¹.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- \( a = \dfrac{27R^2T_c^2}{64P_c} = \dfrac{27 \times 8.314^2 \times 200^2}{64 \times 5.00 \times 10^6} = 0.233 \) Pa m⁶ mol⁻². Correct.
- \( b = \dfrac{RT_c}{8P_c} = \dfrac{8.314 \times 200}{8 \times 5.00 \times 10^6} = 4.157 \times 10^{-5} \) m³ mol⁻¹. Correct.
- \( T_B = \tfrac{27}{8}T_c = 675 \) K (equivalently \( a/Rb = 0.2333/(8.314 \times 4.157 \times 10^{-5}) = 675 \) K). Correct.
- \( V_c = 3b = 1.25 \times 10^{-4} \) m³ mol⁻¹, not \( b \). Wrong.
Practice Q6. One mole of a van der Waals gas with \( a = 0.364 \) Pa m⁶ mol⁻² and \( b = 4.27 \times 10^{-5} \) m³ mol⁻¹ occupies 1.00 dm³ at 300 K. Consider the statements:
- The pressure is about 22.4 bar, compared with 24.9 bar for an ideal gas.
- \( Z \approx 0.90 \).
- The second virial coefficient is about \( -103 \) cm³ mol⁻¹.
- At 10 bar and 300 K, the fugacity is greater than 10 bar.
Which are correct?
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- \( P = \dfrac{RT}{V_m - b} - \dfrac{a}{V_m^2} = \dfrac{2494.2}{9.573 \times 10^{-4}} - \dfrac{0.364}{10^{-6}} = 2.605 \times 10^6 - 0.364 \times 10^6 = 2.241 \times 10^6 \) Pa \( = 22.4 \) bar. Ideal: \( RT/V_m = 24.9 \) bar. Correct.
- \( Z = PV_m/RT = 2.241 \times 10^6 \times 10^{-3}/2494.2 = 0.899 \). Correct.
- \( B = b - a/RT = 4.27 \times 10^{-5} - 0.364/2494.2 = -1.03 \times 10^{-4} \) m³ mol⁻¹ \( = -103 \) cm³ mol⁻¹. (Check: \( 1 + B/V_m = 0.897 \), close to the exact \( Z \).) Correct.
- \( \ln\phi \approx BP/RT = (-1.03 \times 10^{-4} \times 10^6)/2494.2 = -0.041 \); \( \phi = 0.96 \), so \( f \approx 9.6 \) bar, less than 10 bar. Wrong.
Practice Q7. For the gas of Q6 (\( C_{P,m} = 37.1 \) J K⁻¹ mol⁻¹), the low-pressure van der Waals estimates of the Joule–Thomson coefficient at 300 K and of the inversion temperature are closest to:
(a) 0.67 K bar⁻¹ and 2050 K (b) 0.67 K bar⁻¹ and 1025 K (c) −0.67 K bar⁻¹ and 2050 K (d) 6.7 K bar⁻¹ and 304 K
Answer: (a)
\( \mu_{\text{JT}} \approx \dfrac{1}{C_{P,m}}\left(\dfrac{2a}{RT} - b\right) = \dfrac{1}{37.1}\left(\dfrac{0.728}{2494.2} - 4.27 \times 10^{-5}\right) = \dfrac{2.492 \times 10^{-4}}{37.1} = 6.72 \times 10^{-6} \) K Pa⁻¹ \( = 0.67 \) K bar⁻¹ (positive: the gas cools).
\( T_i = 2a/Rb = 2 \times 1025 = 2050 \) K. (b) is \( T_B \). The real inversion temperature of a gas with these constants is lower; the van der Waals model overestimates it, so treat 2050 K as an order-of-magnitude figure.
Quick Revision Table
| Idea | Fact |
|---|---|
| Compression factor | \( Z = PV_m/RT \); \( Z < 1 \) attraction, \( Z > 1 \) repulsion |
| van der Waals | \( (P + a/V_m^2)(V_m - b) = RT \) |
| \( b \) | \( \tfrac{2}{3}\pi N_A\sigma^3 \) = 4 × molecular volume |
| Critical constants | \( V_c = 3b \), \( T_c = 8a/27Rb \), \( P_c = a/27b^2 \) |
| From \( T_c \), \( P_c \) | \( a = 27R^2T_c^2/64P_c \), \( b = RT_c/8P_c \) |
| \( Z_c \) | 3/8 (vdW); 0.27–0.31 (real); \( 2/e^2 \) (Dieterici) |
| Reduced vdW | \( (P_r + 3/V_r^2)(3V_r - 1) = 8T_r \) |
| Virial | \( Z = 1 + B/V_m + \ldots \); vdW \( B = b - a/RT \), \( C = b^2 \) |
| Boyle temperature | \( T_B = a/Rb = 27T_c/8 \) |
| Joule–Thomson | isenthalpic; \( \mu_{\text{JT}} \approx (2a/RT - b)/C_{P,m} \) |
| Inversion temperature | \( T_i = 2a/Rb = 2T_B \); H₂, He warm at room \( T \) |
| Fugacity | \( \mu = \mu^\circ + RT\ln(f/P^\circ) \); \( \ln\phi = \int_0^P (Z-1)\,dP/P \approx BP/RT \) |
| Equal areas | Maxwell construction replaces the vdW loop below \( T_c \) |
Key Takeaways
What’s Next
- Ideal and Non-ideal Solutions: activity and activity coefficients do for solutions what fugacity does for gases.
- Chemical Thermodynamics: Quick Revision.
- The critical point on a full phase diagram: Phase Transitions, Phase Equilibria and the Phase Rule.
- The Physical Sciences paper treats real gases from the statistical side: Physical Sciences.