Thermodynamic Potentials, Maxwell's Relations and Spontaneity
CSIR NET chemistry: U, H, A and G, the four Maxwell relations, thermodynamic equations of state, Cp − Cv, Gibbs–Helmholtz and criteria of spontaneity.
- 20 min
On this page · 15 sections
- Prerequisites
- The Hook: Measuring the Unmeasurable
- The Four Fundamental Equations
- Maxwell’s Relations
- What the Maxwell Relations Buy You
- Gibbs Energy: Temperature and Pressure Dependence
- Spontaneity: Which Function, Which Constraints
- Open Systems: Chemical Potential
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Laws of Thermodynamics, State and Path Functions: the first law, \( dS = \delta q_{\text{rev}}/T \) and the exactness test are the raw material here.
- Partial derivatives, the chain rule and mixed second derivatives: Metric Spaces and Several Variables.
- The biochemist’s use of \( \Delta G \), which this page makes rigorous: Chemical Bonds and Biophysical Chemistry.
The Hook: Measuring the Unmeasurable
The Four Fundamental Equations
Combine the first law \( dU = \delta q + \delta w \) with \( \delta q_{\text{rev}} = T\,dS \) and \( \delta w_{\text{rev}} = -P\,dV \) (closed system, expansion work only):
$$dU = T\,dS - P\,dV$$Although derived along a reversible path, this relation holds for any change between neighbouring equilibrium states, because it involves only state functions. Three Legendre transforms define the other potentials:
| Potential | Definition | Fundamental equation | Natural variables |
|---|---|---|---|
| Internal energy \( U \) | \( dU = T\,dS - P\,dV \) | \( S, V \) | |
| Enthalpy \( H \) | \( U + PV \) | \( dH = T\,dS + V\,dP \) | \( S, P \) |
| Helmholtz energy \( A \) | \( U - TS \) | \( dA = -S\,dT - P\,dV \) | \( T, V \) |
| Gibbs energy \( G \) | \( H - TS = A + PV \) | \( dG = -S\,dT + V\,dP \) | \( T, P \) |
Reading off the coefficients gives the first derivatives:
$$T = \left(\frac{\partial U}{\partial S}\right)_V = \left(\frac{\partial H}{\partial S}\right)_P, \quad P = -\left(\frac{\partial U}{\partial V}\right)_S = -\left(\frac{\partial A}{\partial V}\right)_T$$$$V = \left(\frac{\partial H}{\partial P}\right)_S = \left(\frac{\partial G}{\partial P}\right)_T, \quad S = -\left(\frac{\partial A}{\partial T}\right)_V = -\left(\frac{\partial G}{\partial T}\right)_P$$Maxwell’s Relations
Each fundamental equation is an exact differential, so its cross-derivatives are equal (the Euler test from the previous page):
| From | Maxwell relation |
|---|---|
| \( dU = T\,dS - P\,dV \) | \( \left(\dfrac{\partial T}{\partial V}\right)_S = -\left(\dfrac{\partial P}{\partial S}\right)_V \) |
| \( dH = T\,dS + V\,dP \) | \( \left(\dfrac{\partial T}{\partial P}\right)_S = \left(\dfrac{\partial V}{\partial S}\right)_P \) |
| \( dA = -S\,dT - P\,dV \) | \( \left(\dfrac{\partial S}{\partial V}\right)_T = \left(\dfrac{\partial P}{\partial T}\right)_V \) |
| \( dG = -S\,dT + V\,dP \) | \( \left(\dfrac{\partial S}{\partial P}\right)_T = -\left(\dfrac{\partial V}{\partial T}\right)_P \) |
The last two are by far the most used, because they hold \( T \) constant and turn an entropy derivative into an equation-of-state derivative.
The thermodynamic square
graph LR
S((S)) --- U[U] --- V((V))
V --- A[A] --- T((T))
T --- G[G] --- P((P))
P --- H[H] --- SCorners are the variables, sides are the potentials. Read it clockwise from the bottom: “Good Physicists Have Studied Under Very Fine Teachers” gives G, P, H, S, U, V, F (= A), T. Arranged as a square:
| S | U | V |
| H | A | |
| P | G | T |
- Fundamental equations: a potential’s natural variables are the two corners beside it, and the coefficient of each \( d(\text{corner}) \) is the diagonally opposite corner. In this layout, differentials of the right-hand column (\( dV \), \( dT \)) carry a minus sign and those of the left-hand column (\( dS \), \( dP \)) a plus sign. Check: \( U \) sits between \( S \) and \( V \), so \( dU = T\,dS - P\,dV \); \( A \) sits between \( V \) and \( T \), so \( dA = -P\,dV - S\,dT \).
- Maxwell relations: once the four fundamental equations are written, cross-differentiate each one. Square-reading rules for Maxwell relations exist, but they depend on how the square is drawn, and a mis-drawn square gives a wrong sign.
Two partial-derivative tools
- Cyclic (triple-product) rule: \( \left(\dfrac{\partial x}{\partial y}\right)_z \left(\dfrac{\partial y}{\partial z}\right)_x \left(\dfrac{\partial z}{\partial x}\right)_y = -1 \).
- Response coefficients: expansion coefficient \( \alpha = \dfrac{1}{V}\left(\dfrac{\partial V}{\partial T}\right)_P \); isothermal compressibility \( \kappa_T = -\dfrac{1}{V}\left(\dfrac{\partial V}{\partial P}\right)_T \). The cyclic rule gives
For an ideal gas, \( \alpha = 1/T \) and \( \kappa_T = 1/P \).
What the Maxwell Relations Buy You
1. Thermodynamic equations of state
From \( dU = T\,dS - P\,dV \), divide by \( dV \) at constant \( T \) and use \( (\partial S/\partial V)_T = (\partial P/\partial T)_V \):
$$\boxed{\left(\frac{\partial U}{\partial V}\right)_T = T\left(\frac{\partial P}{\partial T}\right)_V - P \equiv \pi_T}$$\( \pi_T \) is the internal pressure. Similarly, from \( dH = T\,dS + V\,dP \) and \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \):
$$\boxed{\left(\frac{\partial H}{\partial P}\right)_T = V - T\left(\frac{\partial V}{\partial T}\right)_P = V(1 - \alpha T)}$$| Gas | \( P \) | \( (\partial P/\partial T)_V \) | \( \pi_T = (\partial U/\partial V)_T \) |
|---|---|---|---|
| Ideal | \( RT/V_m \) | \( R/V_m \) | \( 0 \) |
| van der Waals | \( \dfrac{RT}{V_m - b} - \dfrac{a}{V_m^2} \) | \( \dfrac{R}{V_m - b} \) | \( \dfrac{a}{V_m^2} \) |
So the energy of an ideal gas depends on \( T \) only (Joule’s law is a consequence of \( PV = nRT \), not an extra assumption), and for a van der Waals gas the energy rises on isothermal expansion because the molecules move apart against their attraction: \( \Delta U_m = a\left(\dfrac{1}{V_{m,1}} - \dfrac{1}{V_{m,2}}\right) \).
2. Entropy as a function of \( T \) and \( V \), or \( T \) and \( P \)
$$dS = \frac{C_V}{T}\,dT + \left(\frac{\partial P}{\partial T}\right)_V dV, \qquad dS = \frac{C_P}{T}\,dT - V\alpha\,dP$$The second form is the hook: \( (\partial S/\partial P)_T = -V\alpha \). Most substances expand on warming (\( \alpha > 0 \)), so their entropy falls on isothermal compression. Water between 0 °C and 4 °C has \( \alpha < 0 \), and its entropy rises on compression there.
For an ideal gas, \( (\partial S/\partial P)_T = -nR/P \), which integrates to \( \Delta S = -nR\ln(P_2/P_1) \), the result already used on the previous page.
3. The general \( C_P - C_V \)
$$\boxed{C_P - C_V = T\left(\frac{\partial P}{\partial T}\right)_V\left(\frac{\partial V}{\partial T}\right)_P = \frac{TV\alpha^2}{\kappa_T}}$$- Ideal gas: \( T \cdot V \cdot (1/T)^2 \cdot P = PV/T = nR \). The familiar result is a special case.
- Since \( \kappa_T > 0 \) for any stable substance and \( \alpha^2 \geq 0 \), \( C_P \geq C_V \) always, with equality where \( \alpha = 0 \) (water at its density maximum near 4 °C).
- For solids and liquids the difference is small but not zero; it is what converts a measured \( C_P \) into the \( C_V \) that theory predicts.
4. The Joule–Thomson coefficient (preview)
$$\mu_{\text{JT}} = \left(\frac{\partial T}{\partial P}\right)_H = -\frac{1}{C_P}\left(\frac{\partial H}{\partial P}\right)_T = \frac{T(\partial V/\partial T)_P - V}{C_P} = \frac{V(\alpha T - 1)}{C_P}$$Zero for an ideal gas (\( \alpha T = 1 \)). Its sign for real gases, and the inversion temperature, are worked out in Ideal and Real Gases.
Gibbs Energy: Temperature and Pressure Dependence
Pressure
$$\left(\frac{\partial G}{\partial P}\right)_T = V$$| Phase | Integrated form |
|---|---|
| Ideal gas | \( G_m(P) = G_m^\circ + RT\ln(P/P^\circ) \) |
| Liquid or solid (\( V \) nearly constant) | \( \Delta G_m \approx V_m\,\Delta P \) |
Compressing 1 mol of ideal gas from 1 to 10 bar at 298 K raises \( G \) by \( RT\ln 10 = 5.70 \) kJ. Compressing 1 mol of liquid water (\( V_m \approx 18 \) cm³) from 1 to 101 bar raises it by only \( 18 \times 10^{-6} \times 100 \times 10^5 = 180 \) J. This is why condensed-phase equilibria barely respond to pressure.
Temperature: the Gibbs–Helmholtz equation
\( (\partial G/\partial T)_P = -S \) and \( G = H - TS \) combine to
$$\boxed{\left(\frac{\partial (G/T)}{\partial T}\right)_P = -\frac{H}{T^2}}, \qquad \text{for a reaction: } \left(\frac{\partial (\Delta G/T)}{\partial T}\right)_P = -\frac{\Delta H}{T^2}$$Equivalent form: \( \left(\dfrac{\partial (\Delta G/T)}{\partial (1/T)}\right)_P = \Delta H \). With \( \Delta H \) constant:
$$\frac{\Delta G(T_2)}{T_2} = \frac{\Delta G(T_1)}{T_1} + \Delta H\left(\frac{1}{T_2} - \frac{1}{T_1}\right)$$Since \( \Delta_r G^\circ = -RT\ln K \), this becomes the van ’t Hoff equation on the next page. The analogous result for \( A \) is \( (\partial(A/T)/\partial T)_V = -U/T^2 \).
Spontaneity: Which Function, Which Constraints
Start from the Clausius inequality \( dS \geq \delta q/T \) and the first law \( dU = \delta q - P_{\text{ext}}\,dV + \delta w_{\text{other}} \):
$$T\,dS \geq dU + P\,dV - \delta w_{\text{other}}$$Hold different pairs of variables constant and the inequality picks out a different function:
| Constraints | Criterion for a spontaneous change | Equilibrium |
|---|---|---|
| \( U, V \) constant (isolated) | \( dS > 0 \) | \( S \) maximum |
| \( S, V \) constant | \( dU < 0 \) | \( U \) minimum |
| \( S, P \) constant | \( dH < 0 \) | \( H \) minimum |
| \( T, V \) constant | \( dA < 0 \) | \( A \) minimum |
| \( T, P \) constant | \( dG < 0 \) | \( G \) minimum |
- At constant \( T \): the maximum total work a system can do is \( -\Delta A \) (“A” from German Arbeit, work).
- At constant \( T \) and \( P \): the maximum non-expansion (useful, e.g. electrical) work is \( -\Delta G \). In a cell, \( \Delta_r G = -nFE \).
The four cases of \( \Delta G = \Delta H - T\Delta S \)
| \( \Delta H \) | \( \Delta S \) | \( \Delta G \) | Spontaneous |
|---|---|---|---|
| − | + | always − | at all \( T \) |
| + | − | always + | never (reverse is spontaneous) |
| − | − | − at low \( T \) | below \( T^* = \Delta H/\Delta S \) |
| + | + | − at high \( T \) | above \( T^* = \Delta H/\Delta S \) |
The crossover temperature \( T^* \) assumes \( \Delta H \) and \( \Delta S \) are roughly constant. Melting is the textbook \( (+,+) \) case: \( T^* \) is the melting point, where \( \Delta G = 0 \).
Open Systems: Chemical Potential
When composition can change, each potential gains a term \( \sum_i \mu_i\,dn_i \):
$$dG = -S\,dT + V\,dP + \sum_i \mu_i\,dn_i, \qquad \mu_i = \left(\frac{\partial G}{\partial n_i}\right)_{T,P,n_{j\neq i}}$$The same \( \mu_i \) appears in \( dU \), \( dH \) and \( dA \), with their own natural variables held fixed: \( \mu_i = (\partial U/\partial n_i)_{S,V,n_j} = (\partial A/\partial n_i)_{T,V,n_j} \). Only the derivative of \( G \) is a partial molar quantity, because only \( G \)’s natural variables (\( T, P \)) are intensive.
- Pure substance: \( \mu = G_m \).
- Matter flows from high \( \mu \) to low \( \mu \). At equilibrium, \( \mu_i \) of each component is the same in every phase where it is present. This drives phase equilibria and the phase rule.
- Euler’s theorem (extensive \( G \) is homogeneous of degree 1 in the \( n_i \)): \( G = \sum_i n_i\mu_i \).
- Gibbs–Duhem equation: at constant \( T \) and \( P \), \( \sum_i n_i\,d\mu_i = 0 \). In a binary mixture, \( x_A\,d\mu_A = -x_B\,d\mu_B \): the chemical potentials cannot change independently. This links Raoult’s and Henry’s laws in Ideal and Non-ideal Solutions.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| \( (\partial S/\partial V)_T = +(\partial P/\partial T)_V \) | \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \) | |
| \( -\Delta A \): maximum total work (constant \( T \)) | \( -\Delta G \): maximum non-expansion work (constant \( T, P \)) | |
| \( \mu_i = (\partial G/\partial n_i)_{T,P} \): partial molar | \( \mu_i = (\partial A/\partial n_i)_{T,V} \): equal in value, not partial molar | |
| Gibbs–Helmholtz: \( \partial(\Delta G/T)/\partial T = -\Delta H/T^2 \) | \( (\partial \Delta G/\partial T)_P = -\Delta S \) | |
| \( \pi_T = 0 \): ideal gas | \( \pi_T = a/V_m^2 \): van der Waals gas | |
| \( C_P - C_V = nR \): ideal gas | \( C_P - C_V = TV\alpha^2/\kappa_T \): any phase |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Take \( R = 8.314 \) J K⁻¹ mol⁻¹.
Level 1: Foundation
- What are the natural variables of the Helmholtz energy?
- Which derivative equals \( (\partial S/\partial V)_T \)?
- What is \( (\partial U/\partial V)_T \) for an ideal gas?
Answers
- \( T \) and \( V \): \( dA = -S\,dT - P\,dV \).
- \( (\partial P/\partial T)_V \), from cross-differentiating \( dA \).
- Zero. \( T(\partial P/\partial T)_V - P = T(nR/V) - P = 0 \).
Level 2: Part B Style
Practice Q1. The Maxwell relation derived from the Gibbs energy is:
(a) \( (\partial S/\partial P)_T = (\partial V/\partial T)_P \) (b) \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \) (c) \( (\partial T/\partial P)_S = (\partial V/\partial S)_P \) (d) \( (\partial S/\partial V)_T = (\partial P/\partial T)_V \)
Answer: (b)
\( dG = -S\,dT + V\,dP \). Cross-differentiate: \( \partial(-S)/\partial P|_T = \partial V/\partial T|_P \), so \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \). (a) drops the sign; (c) is from \( H \); (d) is from \( A \).
Practice Q2. A process has \( \Delta H = +40 \) kJ mol⁻¹ and \( \Delta S = +100 \) J K⁻¹ mol⁻¹, both independent of temperature. At constant pressure it is spontaneous:
(a) at all temperatures (b) only below 400 K (c) only above 400 K (d) at no temperature
Answer: (c)
\( \Delta G = \Delta H - T\Delta S < 0 \) requires \( T > \Delta H/\Delta S = 40\,000/100 = 400 \) K. With both \( \Delta H \) and \( \Delta S \) positive, entropy wins at high temperature.
Practice Q3. For a van der Waals gas with \( a = 0.40 \) Pa m⁶ mol⁻² at a molar volume of \( 1.0 \times 10^{-3} \) m³ mol⁻¹, the internal pressure \( (\partial U_m/\partial V_m)_T \) is:
(a) 0 (b) \( 4.0 \times 10^2 \) Pa (c) \( 4.0 \times 10^5 \) Pa (d) \( 4.0 \times 10^8 \) Pa
Answer: (c)
\( \pi_T = a/V_m^2 = 0.40/(1.0 \times 10^{-6}) = 4.0 \times 10^5 \) Pa (about 4 bar). (a) is the ideal-gas value; (b) divides by \( V_m \) instead of \( V_m^2 \).
Practice Q4. At 298 K, one mole of an ideal gas and one mole of liquid water (\( V_m = 18 \) cm³ mol⁻¹, incompressible) are each compressed isothermally from 1 bar to 101 bar. The increases in Gibbs energy are closest to:
(a) gas 11.4 kJ, water 180 J (b) gas 5.70 kJ, water 1.80 kJ (c) gas 11.4 kJ, water 1.80 kJ (d) gas 5.70 kJ, water 180 J
Answer: (a)
Gas: \( RT\ln(101/1) = 8.314 \times 298 \times 4.615 = 11.43 \) kJ. Water: \( V_m\Delta P = 18 \times 10^{-6} \times 100 \times 10^5 = 180 \) J.
(d) uses \( RT\ln 10 \), the value for a tenfold compression. The gas responds about sixty times more strongly than the liquid.
Level 3: Part C Style
Practice Q5. A liquid at 300 K has \( \alpha = 2.0 \times 10^{-4} \) K⁻¹, \( \kappa_T = 5.0 \times 10^{-10} \) Pa⁻¹ and \( V_m = 1.0 \times 10^{-4} \) m³ mol⁻¹. Consider the statements:
- \( C_{P,m} - C_{V,m} = 2.4 \) J K⁻¹ mol⁻¹.
- \( (\partial S_m/\partial P)_T = -2.0 \times 10^{-8} \) J K⁻¹ mol⁻¹ Pa⁻¹.
- \( (\partial P/\partial T)_V = 4.0 \times 10^5 \) Pa K⁻¹.
- Compressing the liquid isothermally increases its entropy.
Which are correct?
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- \( TV_m\alpha^2/\kappa_T = 300 \times 10^{-4} \times 4.0 \times 10^{-8}/(5.0 \times 10^{-10}) = 2.4 \) J K⁻¹ mol⁻¹. Correct.
- \( (\partial S_m/\partial P)_T = -V_m\alpha = -10^{-4} \times 2.0 \times 10^{-4} = -2.0 \times 10^{-8} \) J K⁻¹ mol⁻¹ Pa⁻¹. Correct.
- \( \alpha/\kappa_T = 2.0 \times 10^{-4}/5.0 \times 10^{-10} = 4.0 \times 10^5 \) Pa K⁻¹ (4 bar per kelvin: heating a liquid in a sealed rigid container builds pressure fast). Correct.
- With \( \alpha > 0 \), \( (\partial S/\partial P)_T < 0 \): compression lowers the entropy. Wrong.
Practice Q6. For a reaction, \( \Delta_r G^\circ = -20.0 \) kJ mol⁻¹ at 300 K and \( \Delta_r H^\circ = -60.0 \) kJ mol⁻¹, independent of temperature. \( \Delta_r G^\circ \) at 400 K and the temperature above which \( \Delta_r G^\circ \) becomes positive are:
(a) −6.67 kJ mol⁻¹ and 450 K (b) −26.7 kJ mol⁻¹ and 450 K (c) −6.67 kJ mol⁻¹ and 600 K (d) +6.67 kJ mol⁻¹ and 350 K
Answer: (a)
Gibbs–Helmholtz with constant \( \Delta H \): \( \dfrac{\Delta G(400)}{400} = \dfrac{-20\,000}{300} + (-60\,000)\left(\dfrac{1}{400} - \dfrac{1}{300}\right) = -66.67 + 50.00 = -16.67 \) J K⁻¹ mol⁻¹, so \( \Delta G(400) = -6.67 \) kJ mol⁻¹.
Check through \( \Delta S \): \( \Delta S^\circ = (\Delta H^\circ - \Delta G^\circ)/T = (-60.0 + 20.0)/300 = -0.1333 \) kJ K⁻¹ mol⁻¹. Then \( \Delta G(400) = -60.0 + 400 \times 0.1333 = -6.67 \) kJ mol⁻¹, and \( \Delta G = 0 \) at \( T = 60.0/0.1333 = 450 \) K. An exothermic reaction with negative \( \Delta S \) loses its drive on heating.
Practice Q7. One mole of a van der Waals gas (\( a = 0.364 \) Pa m⁶ mol⁻²) expands isothermally from 1.0 L to 10.0 L. The change in internal energy is closest to:
(a) 0 (b) +328 J (c) −328 J (d) +364 J
Answer: (b) +328 J
\( \Delta U_m = \int \pi_T\,dV_m = \int_{V_1}^{V_2}\dfrac{a}{V_m^2}\,dV_m = a\left(\dfrac{1}{V_1} - \dfrac{1}{V_2}\right) \). With \( V_1 = 1.0 \times 10^{-3} \) and \( V_2 = 1.0 \times 10^{-2} \) m³: \( 0.364 \times (1000 - 100) = 327.6 \) J.
Positive: separating attracting molecules raises their potential energy. (a) is the ideal-gas answer; (d) forgets the \( 1/V_2 \) term.
Quick Revision Table
| Idea | Fact |
|---|---|
| Fundamental equations | \( dU = T\,dS - P\,dV \); \( dH = T\,dS + V\,dP \); \( dA = -S\,dT - P\,dV \); \( dG = -S\,dT + V\,dP \) |
| Natural variables | U(S,V), H(S,P), A(T,V), G(T,P) |
| Maxwell (from A) | \( (\partial S/\partial V)_T = (\partial P/\partial T)_V \) |
| Maxwell (from G) | \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \) |
| Maxwell (from U, H) | \( (\partial T/\partial V)_S = -(\partial P/\partial S)_V \); \( (\partial T/\partial P)_S = (\partial V/\partial S)_P \) |
| Internal pressure | \( \pi_T = T(\partial P/\partial T)_V - P \): 0 (ideal), \( a/V_m^2 \) (vdW) |
| \( (\partial H/\partial P)_T \) | \( V - T(\partial V/\partial T)_P \) |
| \( C_P - C_V \) | \( TV\alpha^2/\kappa_T \) (\( = nR \) ideal gas) |
| \( (\partial P/\partial T)_V \) | \( \alpha/\kappa_T \) |
| \( G \) vs \( P \) | gas: \( RT\ln(P_2/P_1) \); condensed: \( V_m\Delta P \) |
| Gibbs–Helmholtz | \( \partial(\Delta G/T)/\partial T = -\Delta H/T^2 \) |
| Spontaneity | \( dS_{U,V} > 0 \); \( dA_{T,V} < 0 \); \( dG_{T,P} < 0 \) |
| Max work | \( -\Delta A \) (total), \( -\Delta G \) (non-expansion) |
| Chemical potential | \( \mu_i = (\partial G/\partial n_i)_{T,P,n_j} \); \( G = \sum n_i\mu_i \) |
| Gibbs–Duhem | \( \sum n_i\,d\mu_i = 0 \) at constant \( T, P \) |
Key Takeaways
What’s Next
- Chemical Equilibrium and Le Chatelier’s Principle: \( dG_{T,P} = 0 \) applied to a reacting mixture gives \( \Delta_r G^\circ = -RT\ln K \).
- Phase Transitions, Phase Equilibria and the Phase Rule: equal chemical potentials between phases.
- Chemical Thermodynamics: Quick Revision.
- Coupled reactions and \( -\Delta G \) as useful work in the cell: Bioenergetics and Metabolism.