Skip to content

Electrical Double Layer, Electrokinetics and Colloid Stability

CSIR NET chemistry: charge on sols, Helmholtz, Gouy–Chapman and Stern models, Debye length, zeta potential, DLVO, Schulze–Hardy rule, emulsions and gels.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Why Rivers Build Deltas
  3. 1. Where the Charge Comes From
  4. 2. Models of the Electrical Double Layer
  5. 3. Electrokinetic Phenomena
  6. 4. Stability: DLVO Theory
  7. 5. Protection and Steric Stabilisation
  8. 6. Emulsions, Foams and Gels
  9. 7. Applications That Recur in Questions
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: Why Rivers Build Deltas

1. Where the Charge Comes From

MechanismExample
Preferential adsorption of a common ionAgI in excess KI adsorbs I⁻ (negative); in excess AgNO₃ adsorbs Ag⁺ (positive). Fe(OH)₃ made from FeCl₃ adsorbs Fe³⁺ (positive).
Ionisation of surface groups–COOH → –COO⁻ on latex and proteins; –NH₂ → –NH₃⁺; sign depends on pH
Amphoteric surface hydroxyls on oxidesM–OH₂⁺ at low pH, M–O⁻ at high pH; zero net charge at the point of zero charge
Isomorphous substitutionAl³⁺ for Si⁴⁺ (or Mg²⁺ for Al³⁺) in clay lattices leaves a permanent negative charge
Adsorption of ionic surfactantsAnionic surfactant on an oil droplet gives a negative emulsion droplet

Sign of common sols

Positive solsNegative sols
Fe(OH)₃, Al(OH)₃ (from hydrolysis of their chlorides)As₂S₃ (adsorbs HS⁻/S²⁻)
AgI in excess AgNO₃AgI in excess KI
Basic dyes (methylene blue)Metal sols: Au, Ag, Pt, Cu
Proteins below their isoelectric pointProteins above their isoelectric point
Clay, starch, gum arabic, acid dyes (eosin, Congo red)

2. Models of the Electrical Double Layer

A charged surface attracts counterions and repels co-ions. The resulting arrangement of fixed surface charge and the compensating ionic cloud is the electrical double layer.

graph LR
    A["Helmholtz
rigid layer of counterions
linear potential drop
like a capacitor"] --> B["Gouy-Chapman
diffuse cloud of point ions
Boltzmann + Poisson
exponential decay"] B --> C["Stern
compact Stern layer
(finite ion size, specific
adsorption) + diffuse layer"] C --> D["Grahame
inner and outer
Helmholtz planes"]
ModelPictureWeakness
HelmholtzOne layer of counterions a fixed distance from the surface; potential falls linearlyIgnores thermal motion; capacitance independent of salt, contrary to experiment
Gouy–ChapmanCounterions spread in a diffuse layer; Poisson–Boltzmann; ψ decays roughly exponentiallyPoint ions: predicts impossibly high counterion concentrations near highly charged surfaces
SternInner compact layer (ions of finite size, possibly specifically adsorbed) plus an outer Gouy–Chapman diffuse layerMore parameters; the standard working model

The diffuse layer and the Debye length

For low potentials (\( \psi \ll k_BT/ze \), about 25 mV for z = 1 at 25 °C) the linearised Poisson–Boltzmann equation gives an exponential decay from the surface (or from the Stern plane):

$$\psi(x) = \psi_0\, e^{-\kappa x}$$

The Debye length \( \kappa^{-1} \) is the thickness of the diffuse layer:

$$\kappa^{-1} = \left(\frac{\varepsilon_r \varepsilon_0 k_B T}{2 N_A e^2 I}\right)^{1/2}, \qquad I = \tfrac{1}{2}\sum_i c_i z_i^2$$

with I in mol m⁻³ in SI units. For water at 25 °C this reduces to the working formula

$$\kappa^{-1}\ (\text{nm}) \approx \frac{0.304}{\sqrt{I\ (\text{mol L}^{-1})}}$$
ElectrolyteI (mol L⁻¹)\( \kappa^{-1} \)
0.001 M NaCl0.0019.6 nm
0.01 M NaCl0.013.0 nm
0.1 M NaCl0.10.96 nm
0.01 M MgSO₄ (2:2)0.041.5 nm

The double layer shrinks as \( 1/\sqrt{I} \), and multivalent ions shrink it faster because \( z^2 \) enters I. This compression is the root of salt-induced coagulation.

Zeta potential

When a particle moves, a thin layer of liquid (including the Stern layer and some bound solvent) moves with it. The boundary is the plane of shear (slipping plane), and the potential there is the zeta potential, ζ. It is slightly smaller in magnitude than the Stern potential and is the only double-layer potential measured routinely.

  • ζ falls in magnitude as salt is added (double-layer compression).
  • ζ can reverse sign if counterions adsorb specifically and over-compensate the surface charge (common with multivalent ions and ionic surfactants).
  • As a working rule, sols with |ζ| above about 30 mV tend to be stable to coagulation; near zero they coagulate rapidly.

3. Electrokinetic Phenomena

Four phenomena arise when a charged surface and a liquid move relative to each other. Two apply a field and measure motion; two impose motion and measure a potential.

PhenomenonWhat is appliedWhat moves or is measured
ElectrophoresisElectric fieldCharged particles move through stationary liquid
Electro-osmosisElectric fieldLiquid moves past a stationary charged surface (capillary, plug, membrane)
Streaming potentialLiquid forced through a capillary or plugA potential difference develops along the flow
Sedimentation potential (Dorn effect)Particles fall under gravity or centrifugationA potential difference develops in the column

Electrophoresis and sedimentation potential involve moving particles; electro-osmosis and streaming potential involve moving liquid. Each pair are mirror images.

Mobility and ζ

The electrophoretic mobility \( u_E = v/E \) is related to ζ by the Henry equation, \( u_E = \dfrac{2\varepsilon\zeta f(\kappa a)}{3\eta} \), where a is the particle radius and \( f(\kappa a) \) runs from 1 to 1.5:

LimitConditionEquation
SmoluchowskiThin double layer, large particle: \( \kappa a \gg 1 \) (aqueous sols with salt)\( u_E = \dfrac{\varepsilon\zeta}{\eta} \)
HückelThick double layer, small particle: \( \kappa a \ll 1 \) (non-aqueous media, tiny particles)\( u_E = \dfrac{2\varepsilon\zeta}{3\eta} \)

Here \( \varepsilon = \varepsilon_r\varepsilon_0 \). For the same measured mobility, Hückel gives a ζ 1.5 times larger than Smoluchowski.

4. Stability: DLVO Theory

Derjaguin, Landau, Verwey and Overbeek treated the interaction energy between two particles as the sum of a double-layer repulsion and a van der Waals attraction:

$$V_T(h) = V_R(h) + V_A(h)$$

Van der Waals attraction. For two equal spheres of radius a at a surface separation \( h \ll a \):

$$V_A = -\frac{A_H\, a}{12\, h}$$

(for two flat plates, \( -A_H/(12\pi h^2) \) per unit area). The Hamaker constant \( A_H \) for particles in water is typically of the order of \( 10^{-20} \) J for polymers and oxides, rising towards \( 10^{-19} \) J or more for metals. The attraction is long-ranged as a power law and is almost insensitive to salt.

Double-layer repulsion. For low potentials and \( \kappa h \gg 1 \), for two spheres:

$$V_R \approx 2\pi\varepsilon a\,\psi_0^2\, e^{-\kappa h}$$

The repulsion decays exponentially with range \( \kappa^{-1} \) and is very sensitive to salt.

Reading the interaction curve

graph TD
    A["Large separation:
both terms small,
weak secondary minimum"] --> B["Intermediate separation:
repulsion dominates,
energy barrier Vmax"] B --> C["Contact:
attraction dominates,
deep primary minimum"] D["Low salt: high barrier
(many kT) - sol stable"] -.-> B E["Salt added: barrier falls;
at the ccc it vanishes -
rapid coagulation"] -.-> B F["Particles trapped in
secondary minimum:
loose, reversible flocculation"] -.-> A
  • Primary minimum: particles in contact; aggregation is effectively irreversible (coagulation).
  • Energy barrier: if it is many times \( k_BT \) (say 15–20 \( k_BT \) or more), few collisions cross it and the sol is kinetically stable.
  • Secondary minimum: at larger separations, especially for large particles at moderate salt; aggregation here is weak and reversible (flocculation, redispersed by shaking).

Adding electrolyte compresses the double layer (raises κ). The repulsion becomes shorter ranged, the barrier falls, and at the critical coagulation concentration (ccc) the barrier just disappears: \( V_T = 0 \) and \( dV_T/dh = 0 \) at the same h.

The Schulze–Hardy rule

Statement: the ion that causes coagulation is the one with charge opposite to that of the sol (the counterion), and its coagulating power increases steeply with its charge.

DLVO theory reproduces the rule. At high surface potentials the ccc varies as

$$\text{ccc} \propto \frac{1}{z^6}$$

so for counterions of charge 1, 2 and 3 the ccc are in the ratio \( 1 : \tfrac{1}{64} : \tfrac{1}{729} \). (At low surface potentials the dependence weakens to about \( \psi_0^4/z^2 \); real data usually fall between the two limits.)

SolCoagulating power of electrolyte ions
Negative (As₂S₃, Au, clay)Al³⁺ > Ba²⁺ > Na⁺ (countercations)
Positive (Fe(OH)₃, Al(OH)₃)[Fe(CN)₆]⁴⁻ > PO₄³⁻ > SO₄²⁻ > Cl⁻ (counteranions)

The flocculation value (coagulation value) is the minimum concentration of an electrolyte, in millimoles per litre, that coagulates the sol under fixed conditions. Coagulating power is inversely proportional to the flocculation value.

Other ways to coagulate a lyophobic sol

  • Mutual coagulation: mixing oppositely charged sols (Fe(OH)₃ with As₂S₃) in suitable proportions.
  • Electrophoresis: particles discharged at the electrode coagulate there.
  • Prolonged dialysis: removes the stabilising ions.
  • Heating or freezing: increases collision energy or concentrates the electrolyte.

Kinetics of coagulation

When the barrier is absent, every Brownian encounter leads to sticking. Smoluchowski’s fast (diffusion-limited) coagulation gives second-order loss of particles:

$$-\frac{dn}{dt} = k_f n^2, \qquad k_f = \frac{4k_BT}{3\eta}, \qquad t_{1/2} = \frac{1}{k_f n_0}$$

Notice the particle radius cancels: larger particles present a bigger collision target (collision radius ∝ a) but diffuse more slowly (D ∝ 1/a), in exact compensation. With a barrier, the rate is slower by the stability ratio \( W = k_f/k_{\text{slow}} \), roughly \( \exp(V_{\max}/k_BT) \) divided by a geometric factor.

5. Protection and Steric Stabilisation

Protective colloids and the gold number

A lyophilic colloid added to a lyophobic sol adsorbs on the particles, coats them with a solvated layer and protects them from coagulation by electrolyte. The gold number (Zsigmondy) is the mass in milligrams of a protective colloid that just prevents the colour change from red to blue when 1 mL of 10% NaCl solution is added to 10 mL of a standard red gold sol.

The smaller the gold number, the greater the protective power. Gelatin has one of the smallest gold numbers and is a very effective protector; starch has a much larger one and protects poorly. Gum arabic lies between them.

Steric and other polymer effects

EffectWhat happensCondition
Steric stabilisationAdsorbed or grafted polymer layers overlap; osmotic and elastic repulsionGood solvent for the polymer; works even in high salt and non-aqueous media
Loss of steric stabilityLayers interpenetrate and attractPoor solvent (worse than theta conditions), for example on changing temperature
Bridging flocculationOne long chain adsorbs on two particlesLow polymer dose, incomplete coverage (used in water treatment)
Depletion flocculationNon-adsorbing polymer is squeezed out of the gap; osmotic pressure pushes particles togetherFree polymer in solution
ElectrostericCharged polymer (polyelectrolyte) gives bothProteins, polyacrylates

6. Emulsions, Foams and Gels

Emulsions

Two types: oil-in-water (O/W) such as milk and vanishing cream, and water-in-oil (W/O) such as butter and cold cream. An emulsifier (surfactant, protein or fine solid) is needed for stability.

  • Bancroft rule: the phase in which the emulsifier is more soluble becomes the continuous phase. Water-soluble soaps give O/W; oil-soluble emulsifiers give W/O.
  • HLB (hydrophile–lipophile balance, Griffin): low HLB emulsifiers favour W/O; high HLB favour O/W.
  • Identifying the type:
TestO/WW/O
Dilution with waterMixesDoes not mix
Water-soluble dyeColours the continuous phaseColours only droplets
Electrical conductivityConducts (water continuous)Hardly conducts

How emulsions break: creaming or sedimentation (density difference, reversible), flocculation, coalescence (film rupture, irreversible) and Ostwald ripening (small droplets dissolve and large ones grow because of the higher solubility of small droplets, the Kelvin effect from the adsorption page). Demulsification uses heating, freezing, centrifugation or added electrolyte.

Gels

A gel is a liquid trapped in a three-dimensional network of the dispersed phase.

  • Elastic gels (gelatin, agar) recover after drying and soaking; non-elastic gels (silica gel) do not.
  • Thixotropy: some gels liquefy on shaking and set again on standing (certain clay suspensions, some paints).
  • Syneresis: a gel shrinks on standing and exudes liquid.
  • Imbibition: a dry elastic gel swells by taking up liquid.

7. Applications That Recur in Questions

ApplicationPrinciple
Delta formation at river mouthsCoagulation of negative clay by sea-water cations
Purification of water with alumAl³⁺ coagulates negative suspended particles; Al(OH)₃ floc sweeps them down
Stopping bleeding with alum or FeCl₃Coagulation of blood colloids
Cottrell electrostatic precipitatorCharged smoke particles coagulate on electrodes
Photographic emulsions, inks, paintsStabilised sols and emulsions
Rubber from latexCoagulation of negatively charged latex particles
Medicines (colloidal gold, silver, sulfur)High surface area, easy absorption

Memory Tricks

Don’t Confuse

ThisvsThat
Electrophoresis: particles move, liquid stillElectro-osmosis: liquid moves, surface still
Streaming potential: liquid flow creates a potentialSedimentation potential: falling particles create a potential
Zeta potential: at the shear plane, measurableSurface (Nernst) potential ψ₀: at the surface, not directly measurable
Isoelectric point: ζ = 0Point of zero charge: net surface charge = 0
Coagulation: primary minimum, irreversibleFlocculation: secondary minimum or bridging, often reversible
Coagulating power (higher is stronger)Flocculation value (lower is stronger)
Gold number: lower is more protectiveFlocculation value: lower is a stronger coagulant
Debye length falls with I as \( I^{-1/2} \)ccc falls with z as \( z^{-6} \) (high potential)
Bancroft rule: emulsion typeSchulze–Hardy rule: coagulation

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. State the Schulze–Hardy rule in one sentence.
  2. Which electrokinetic phenomenon is measured when a liquid is forced through a porous plug and a voltmeter is connected across the plug?
  3. Why does a Fe(OH)₃ sol made by adding FeCl₃ to boiling water carry a positive charge?
Answers
  1. The ion with charge opposite to the sol coagulates it, and its coagulating power rises sharply with its charge (theoretically ccc ∝ z⁻⁶).
  2. Streaming potential.
  3. The Fe(OH)₃ particles preferentially adsorb Fe³⁺ ions, which are common to the particle and abundant in the medium.

Level 2: Part B Style

Practice Q1. For a sol of As₂S₃, the correct order of flocculation values (lowest first) is:

(a) NaCl < BaCl₂ < AlCl₃ (b) AlCl₃ < BaCl₂ < NaCl (c) BaCl₂ < AlCl₃ < NaCl (d) all equal, since the anion is the same

Answer: (b)

As₂S₃ is negative, so the cations are the coagulating ions. Coagulating power Al³⁺ > Ba²⁺ > Na⁺, and the flocculation value is inversely related to coagulating power, so AlCl₃ needs the lowest concentration. Option (a) is the coagulating-power order written as if it were the flocculation-value order.

Practice Q2. The Debye length in 0.025 M Na₂SO₄ at 25 °C is closest to:

(a) 1.1 nm (b) 1.9 nm (c) 3.0 nm (d) 0.61 nm

Answer: (a) 1.1 nm

\( I = \tfrac12[(0.050)(1)^2 + (0.025)(2)^2] = \tfrac12(0.050 + 0.100) = 0.075\ \text{M} \).

\( \kappa^{-1} = 0.304/\sqrt{0.075} = 0.304/0.274 = 1.11\ \text{nm} \). Option (b) uses c = 0.025 M as if it were I.

Practice Q3. Protective colloids P, Q and R have gold numbers 0.01, 0.15 and 20 respectively. Which is correct?

(a) R is the best protective colloid (b) The protective power order is P > Q > R (c) Gold number measures the coagulating power of NaCl (d) Q is a lyophobic sol

Answer: (b)

The gold number is the mass needed to protect a standard gold sol; the smaller it is, the less material is needed and the stronger the protection. So P > Q > R. Protective colloids are lyophilic, so (d) is wrong.

Practice Q4. In DLVO theory, adding an indifferent 1:1 electrolyte to a stable negative sol:

(a) increases the Hamaker constant (b) lowers the height of the energy barrier by compressing the diffuse double layer (c) deepens the primary minimum by increasing van der Waals attraction (d) increases the Debye length

Answer: (b)

Higher ionic strength increases κ, so the repulsion decays over a shorter distance and the barrier falls. The Hamaker constant and van der Waals attraction are essentially unaffected (a, c), and the Debye length decreases (d).

Level 3: Part C Style

Practice Q5. Polystyrene latex particles of radius 0.25 µm are suspended in 10⁻² M KCl at 298 K (\( \varepsilon_r = 78.5 \), η = 0.89 mPa s). They move towards the anode with a speed of 30 µm s⁻¹ in a field of 1000 V m⁻¹. Which statements are correct?

  1. The Smoluchowski equation is appropriate.
  2. ζ is about −38 mV.
  3. Applying the Hückel equation to the same data would give about −58 mV.
  4. Raising the KCl concentration to 0.1 M would be expected to increase |ζ|.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • \( \kappa^{-1} = 0.304/\sqrt{0.01} = 3.0 \) nm, so \( \kappa a = 250/3.0 \approx 83 \gg 1 \): Smoluchowski applies. Statement 1 true.
  • \( u_E = (30\times10^{-6})/1000 = 3.0\times10^{-8}\ \text{m}^2\ \text{V}^{-1}\ \text{s}^{-1} \). \( |\zeta| = \eta u_E/\varepsilon = (0.89\times10^{-3})(3.0\times10^{-8})/(78.5\times8.854\times10^{-12}) = 38.4 \) mV; motion towards the anode means negative particles. Statement 2 true.
  • Hückel: \( \zeta = 3\eta u_E/(2\varepsilon) = 1.5 \times 38.4 = 57.6 \) mV, so about −58 mV (a misuse here, but the arithmetic is right). Statement 3 true.
  • More salt compresses the double layer and lowers |ζ|. Statement 4 false.

Practice Q6. The critical coagulation concentrations of three salts for a sol are measured: KNO₃ 60 mM, Ca(NO₃)₂ 1.0 mM, La(NO₃)₃ 0.09 mM. Which statements are correct?

  1. The sol is negatively charged.
  2. The ratios are close to the \( z^{-6} \) prediction of DLVO theory at high surface potential.
  3. K₂SO₄ would be expected to have a ccc far below 60 mM because the sulfate ion is doubly charged.
  4. For a sol of the opposite sign, the three salts would have similar ccc values when each is expressed as the concentration of nitrate ion.

(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 4 only
  • The ccc falls sharply as the cation charge rises while the anion is the same: the cations are the counterions, so the sol is negative. Statement 1 true.
  • Prediction from 60 mM: 60/64 = 0.94 mM and 60/729 = 0.082 mM; observed 1.0 and 0.09 mM. Statement 2 true.
  • For a negative sol, SO₄²⁻ is a co-ion; K₂SO₄ would behave much like KNO₃ (ccc of the same order, governed by K⁺). Statement 3 false.
  • For a positive sol, NO₃⁻ would be the counterion in all three salts, so the ccc values expressed as nitrate concentration would be similar; the cation (now the co-ion) matters only weakly. Statement 4 true.

Practice Q7. A sol contains \( 2.0\times10^{16} \) particles per m³ in water at 298 K (η = 0.89 mPa s). Electrolyte is added in excess of the ccc so that coagulation is diffusion-limited. Assuming Smoluchowski kinetics, the time for the number of particles to fall to one-quarter of its initial value is closest to:

(a) 8 s (b) 16 s (c) 24 s (d) 32 s

Answer: (c) 24 s

Second-order: \( 1/n - 1/n_0 = k_f t \), with \( k_f = 4k_BT/3\eta = 6.17\times10^{-18}\ \text{m}^3\ \text{s}^{-1} \).

For \( n = n_0/4 \): \( 3/n_0 = k_f t \), so \( t = 3/(k_f n_0) = 3/(6.17\times10^{-18}\times2.0\times10^{16}) = 3/0.123 = 24.3\ \text{s} \).

The first half-life is \( 1/(k_fn_0) = 8.1 \) s and the second is twice as long (16.2 s), so the total is 24 s, not 2 × 8 = 16 s (option b, which assumes first-order kinetics).

Quick Revision Table

IdeaFormula or fact
Positive solsFe(OH)₃, Al(OH)₃, AgI/Ag⁺, basic dyes
Negative solsAs₂S₃, Au, Ag, Pt, clay, starch, AgI/I⁻, acid dyes
Double-layer modelsHelmholtz (rigid) → Gouy–Chapman (diffuse) → Stern (compact + diffuse)
Diffuse potential\( \psi = \psi_0 e^{-\kappa x} \) (low potential)
Debye length\( \kappa^{-1} = 0.304/\sqrt{I} \) nm (water, 25 °C); \( I = \tfrac12\sum c_iz_i^2 \)
Zeta potentialat the shear plane; IEP where ζ = 0
Electrokineticselectrophoresis, electro-osmosis (field applied); streaming, sedimentation potential (motion applied)
Smoluchowski / Hückel\( u = \varepsilon\zeta/\eta \) (\( \kappa a\gg1 \)) / \( u = 2\varepsilon\zeta/3\eta \) (\( \kappa a\ll1 \))
DLVO\( V_T = V_R + V_A \); \( V_A = -A_Ha/12h \); \( V_R \propto e^{-\kappa h} \)
Schulze–Hardycounterion coagulates; ccc ∝ z⁻⁶ → 1 : 1/64 : 1/729
Fast coagulation\( k_f = 4k_BT/3\eta \); \( t_{1/2} = 1/(k_fn_0) \); second order
Gold numbermg protective colloid per 10 mL gold sol vs 1 mL 10% NaCl; smaller = better (gelatin)
Stericgood solvent stabilises; poor solvent, bridging and depletion destabilise
EmulsionsBancroft rule; O/W conducts and dilutes with water
Gelsthixotropy, syneresis, imbibition

Key Takeaways

What’s Next