Heterogeneous Catalysis
CSIR NET chemistry: Langmuir–Hinshelwood and Eley–Rideal rate laws, apparent activation energy, Sabatier volcano, zeolites and industrial catalysts.
- 22 min
On this page · 20 sections
- Prerequisites
- The Hook: The Fertiliser in Your Food
- 1. What a Heterogeneous Catalyst Does
- 2. Unimolecular Surface Reactions
- 3. Bimolecular Reactions: Langmuir–Hinshelwood
- 4. Bimolecular Reactions: Eley–Rideal
- 5. Apparent Activation Energy
- 6. What Makes a Good Catalyst
- 7. When Diffusion Is Slow
- 8. Zeolites and Shape Selectivity
- 9. Industrial Processes to Know
- 10. Characterising a Solid Catalyst
- 11. Heterogeneous vs Homogeneous Catalysis
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Adsorption Isotherms and Surface Area: the Langmuir, dissociative and competitive isotherms are the building blocks of every rate law on this page.
- Homogeneous Catalysis by Organometallic Complexes: the solution-phase counterpart, with catalytic cycles you can compare directly.
- Industrial Importance of Main Group Compounds: Haber, Ostwald and contact processes from the inorganic side.
- Enzymes: Catalysis, Kinetics and Regulation: Michaelis–Menten saturation is the same mathematics as Langmuir–Hinshelwood.
The Hook: The Fertiliser in Your Food
1. What a Heterogeneous Catalyst Does
A catalyst in a different phase from the reactants, usually a solid with gas or liquid reactants, provides an alternative pathway with a lower activation energy. Like any catalyst it does not change the equilibrium constant or ΔG of the overall reaction; it speeds forward and reverse reactions equally.
The elementary steps
graph LR
A["1. External diffusion
to the pellet surface"] --> B["2. Pore (internal)
diffusion"]
B --> C["3. Adsorption
(chemisorption)"]
C --> D["4. Surface reaction"]
D --> E["5. Desorption
of products"]
E --> F["6. Pore diffusion out"]
F --> G["7. External diffusion
to the bulk"]Steps 3–5 are the chemistry; steps 1, 2, 6 and 7 are mass transfer. Any of them can be rate-limiting. The rate laws in Sections 2–4 assume the chemistry is slow and adsorption–desorption is at equilibrium; Section 7 deals with the mass-transfer limit.
Measuring activity
- Rate per gram or per unit volume of catalyst: what an engineer needs.
- Rate per unit area (using the BET area): compares catalysts of different texture.
- Turnover frequency (TOF): molecules converted per active site per second. Active sites are counted by selective chemisorption (H₂ or CO on metals). TOF is the fairest comparison of intrinsic activity.
- Dispersion D: fraction of metal atoms at the surface, D = (surface metal atoms)/(total metal atoms). Small particles have high dispersion.
- Selectivity: moles of desired product per mole of reactant converted. Often more important industrially than activity.
2. Unimolecular Surface Reactions
For \( \text{A(g)} \rightleftharpoons \text{A(ads)} \to \text{products} \), with the surface step rate-determining and products weakly adsorbed:
$$r = k\theta_A = \frac{kK_AP_A}{1 + K_AP_A}$$| Regime | Condition | Rate law | Order in A |
|---|---|---|---|
| Weak adsorption or low pressure | \( K_AP_A \ll 1 \) | \( r = kK_AP_A \) | 1 |
| Strong adsorption or high pressure | \( K_AP_A \gg 1 \) | \( r = k \) | 0 |
| Intermediate | full expression | between 0 and 1 |
The fractional order at any pressure is
$$n = \frac{d\ln r}{d\ln P_A} = 1 - \theta_A$$Classic textbook illustrations: the decomposition of PH₃ on tungsten changes from first order at low pressure to zero order at high pressure, and the decomposition of NH₃ on hot tungsten at high pressure is a standard zero-order example.
Inhibition by a strongly adsorbed product or poison
If a product or impurity B competes for sites:
$$r = \frac{kK_AP_A}{1 + K_AP_A + K_BP_B}$$If A is weakly and B strongly adsorbed (\( K_BP_B \gg 1 + K_AP_A \)):
$$r = \frac{kK_AP_A}{K_BP_B}$$The rate is first order in A and minus first order in B. The decomposition of NH₃ on platinum, retarded by the hydrogen it produces, is the textbook example of this form.
3. Bimolecular Reactions: Langmuir–Hinshelwood
In the Langmuir–Hinshelwood (LH) mechanism both reactants are adsorbed on neighbouring sites and react on the surface:
$$\text{A(ads)} + \text{B(ads)} \to \text{products}, \qquad r = k\theta_A\theta_B$$With competitive Langmuir adsorption on the same sites:
$$\boxed{r = \frac{kK_AK_BP_AP_B}{(1 + K_AP_A + K_BP_B)^2}}$$The signature: at fixed \( P_B \), the rate rises with \( P_A \), passes through a maximum and then falls, because A crowds B off the surface. Setting \( \partial r/\partial P_A = 0 \):
$$K_AP_A = 1 + K_BP_B \quad \text{at the maximum, where } \theta_A = \tfrac12$$The order in A at a given pressure is \( 1 - 2\theta_A \): positive at low coverage, zero at the maximum, negative beyond it.
Example: CO oxidation on platinum follows LH kinetics. At high CO pressure CO covers the surface, O₂ cannot dissociatively adsorb, and the rate becomes negative order in CO: CO poisons its own oxidation.
4. Bimolecular Reactions: Eley–Rideal
In the Eley–Rideal (ER) mechanism, adsorbed A reacts with B arriving directly from the gas phase:
$$\text{A(ads)} + \text{B(g)} \to \text{products}, \qquad r = k\theta_AP_B = \frac{kK_AP_AP_B}{1 + K_AP_A}$$At fixed \( P_B \), the rate rises with \( P_A \) and levels off; it never passes through a maximum. It is always first order in B.
| Feature | Langmuir–Hinshelwood | Eley–Rideal |
|---|---|---|
| Species adsorbed | Both A and B | A only |
| Rate law | \( kK_AK_BP_AP_B/(1+K_AP_A+K_BP_B)^2 \) | \( kK_AP_AP_B/(1+K_AP_A) \) |
| Rate against \( P_A \) at fixed \( P_B \) | Rises, maximum, falls | Rises, saturates |
| Order in \( P_A \) at high \( P_A \) | −1 | 0 |
| Order in \( P_B \) | 1 at low, negative at high \( P_B \) | Always 1 |
| Frequency | Most common in catalysis | Rarer (some H-atom abstraction reactions) |
5. Apparent Activation Energy
The measured activation energy comes from the Arrhenius plot of the observed rate. But the observed rate constant contains adsorption equilibrium constants, each with its own temperature dependence \( K = K_0 e^{-\Delta H_{\text{ads}}/RT} \). Writing \( q = -\Delta H_{\text{ads}} > 0 \) for the heat of adsorption:
| Regime | Observed rate | Apparent activation energy |
|---|---|---|
| Strong adsorption (zero order) | \( r = k \) | \( E_{\text{app}} = E_{\text{true}} \) |
| Weak adsorption (first order) | \( r = kK_AP_A \) | \( E_{\text{app}} = E_{\text{true}} + \Delta H_A = E_{\text{true}} - q_A \) |
| Weak A, strongly adsorbed inhibitor B | \( r = kK_AP_A/(K_BP_B) \) | \( E_{\text{app}} = E_{\text{true}} - q_A + q_B \) |
Interpretation:
- When A is weakly adsorbed, raising T speeds the surface step but empties the surface, so the measured barrier is lower than the true one.
- When a strongly bound inhibitor must leave to free sites, raising T helps desorb it, so the measured barrier is higher than the true one.
- Over a wide temperature range the Arrhenius plot can curve, because the coverage regime changes with temperature.
6. What Makes a Good Catalyst
The Sabatier principle and volcano plots
The Sabatier principle: the best catalyst binds the reactants (or key intermediates) neither too weakly nor too strongly.
- Too weak: reactants do not adsorb or are not activated; coverage is low.
- Too strong: intermediates or products do not leave; the surface is poisoned by its own species.
Plotting activity against a measure of adsorption strength across a series of metals gives a volcano plot, with the best catalysts at the peak. The decomposition of formic acid over metals, plotted against the heat of formation of the corresponding metal formate, is the classic textbook volcano. In modern terms, the position of the metal d-band centre relative to the Fermi level correlates with adsorption strength: the higher the d-band centre, the stronger the binding.
Components of a practical catalyst
| Component | Role | Examples |
|---|---|---|
| Active phase | Does the chemistry | Fe, Ni, Pt, Pd, Rh, Cu, Ag; oxides (V₂O₅); sulfides (MoS₂) |
| Support | Disperses the active phase, provides area, stabilises small particles | γ-Al₂O₃, SiO₂, activated carbon, zeolites, TiO₂ |
| Structural promoter | Prevents sintering, keeps area high | Al₂O₃ in the Haber iron catalyst |
| Electronic promoter | Modifies binding at the active site | K₂O in the Haber iron catalyst (donates electron density, helps N₂ dissociation) |
| Poison | Blocks sites by strong adsorption | S compounds (H₂S, thiophene) on Ni, Pt; As; Pb on Pt in exhaust catalysts; CO on Pt for some reactions |
| Selective poison | Deliberately lowers activity to raise selectivity | Lindlar catalyst: Pd on CaCO₃ with lead acetate and quinoline, stops alkyne hydrogenation at the cis-alkene |
Deactivation
- Poisoning: chemical blocking of sites (sulfur, lead, arsenic).
- Fouling or coking: carbon deposits cover sites and plug pores (common in cracking; reversed by burning off).
- Sintering: small metal particles merge at high temperature, dispersion falls.
- Loss of active phase: volatilisation or leaching.
Structure sensitivity
A reaction whose TOF depends on particle size or crystal face is structure-sensitive; one whose TOF does not is structure-insensitive. Reactions that break strong bonds, such as ammonia synthesis (N≡N dissociation), tend to be structure-sensitive and need special sites (steps, particular faces); simple hydrogenations of alkenes on metals tend to be structure-insensitive.
7. When Diffusion Is Slow
In a porous pellet, reactants must diffuse into the pores. The Thiele modulus compares the reaction rate with the diffusion rate; for a first-order reaction in a slab of half-thickness L:
$$\phi = L\sqrt{\frac{k_v}{D_{\text{eff}}}}, \qquad \eta = \frac{\tanh\phi}{\phi}$$where η, the effectiveness factor, is the actual rate divided by the rate if the whole interior saw the surface concentration.
| Regime | φ | η | Consequence |
|---|---|---|---|
| Kinetic control | small (< about 0.5) | ≈ 1 | Whole pellet used; true kinetics measured |
| Strong pore diffusion | large (> about 5) | ≈ 1/φ | Only an outer shell works; \( E_{\text{app}} \approx E_{\text{true}}/2 \); apparent order \( (n+1)/2 \) |
| External film diffusion | Rate set by flow or stirring; \( E_{\text{app}} \) only a few kJ mol⁻¹ |
An Arrhenius plot over a wide range can therefore show three slopes: true E at low T, about E/2 in the pore-diffusion regime, and a very small slope when external mass transfer takes over at high T. Tests: if the rate changes with stirring or flow rate, external diffusion matters; if it changes with pellet size, pore diffusion matters.
8. Zeolites and Shape Selectivity
Zeolites are crystalline aluminosilicates built from corner-sharing SiO₄ and AlO₄ tetrahedra, with channels and cages of molecular size. Each Al³⁺ in place of Si⁴⁺ creates a negative framework charge balanced by a cation; when that cation is H⁺, the result is a strong Brønsted acid site (bridging Si–O(H)–Al). The Si/Al ratio controls the number of acid sites and the hydrothermal stability.
Shape selectivity comes in three forms:
| Type | What is selected | Example |
|---|---|---|
| Reactant selectivity | Only molecules small enough to enter react | Linear alkanes cracked in preference to branched ones |
| Product selectivity | Only products small enough to leave escape; the rest isomerise or are trapped | ZSM-5 favours para-xylene, the slimmest isomer |
| Transition-state selectivity | Bulky transition states cannot form in the pores | Suppression of bulky bimolecular side reactions |
ZSM-5 (MFI framework, ten-ring channels) is used for methanol-to-gasoline and xylene isomerisation; faujasite (zeolite Y) is the active component of fluid catalytic cracking catalysts.
Acid sites on solids are characterised by adsorbing a base such as pyridine and recording the IR spectrum (pyridinium ion on Brønsted sites vs coordinated pyridine on Lewis sites), or by temperature-programmed desorption of NH₃.
9. Industrial Processes to Know
| Process | Reaction | Catalyst |
|---|---|---|
| Haber–Bosch | N₂ + 3H₂ ⇌ 2NH₃ | Fe (from magnetite), promoted with K₂O and Al₂O₃ |
| Ostwald | 4NH₃ + 5O₂ → 4NO + 6H₂O | Pt–Rh gauze |
| Contact process | 2SO₂ + O₂ ⇌ 2SO₃ | V₂O₅ (with K₂SO₄ promoter on silica) |
| Methanol synthesis | CO/CO₂ + H₂ → CH₃OH | Cu/ZnO/Al₂O₃ |
| Fischer–Tropsch | nCO + (2n+1)H₂ → CₙH₂ₙ₊₂ + nH₂O | Fe or Co |
| Steam reforming | CH₄ + H₂O → CO + 3H₂ | Ni on a support |
| Hydrogenation of vegetable oils | C=C + H₂ → CH–CH | Ni |
| Fluid catalytic cracking | Heavy oil → gasoline-range hydrocarbons | Zeolite Y in a matrix |
| Hydrodesulfurisation | R–S–R’ + H₂ → hydrocarbons + H₂S | Sulfided Co–Mo or Ni–Mo on Al₂O₃ |
| Ethylene oxide | C₂H₄ + ½O₂ → C₂H₄O | Ag |
| Ziegler–Natta polymerisation | n C₂H₄ or propene → polymer | TiCl₄ on MgCl₂ with AlEt₃ (supported version) |
| Three-way converter (car exhaust) | CO, hydrocarbons oxidised; NOₓ reduced to N₂ | Pt, Pd, Rh on a ceramic monolith |
| Deacon process | 4HCl + O₂ → 2Cl₂ + 2H₂O | CuCl₂ |
Two mechanisms worth knowing in detail
Ammonia synthesis on iron. The rate-determining step is the dissociative chemisorption of N₂. Adsorbed N atoms are hydrogenated stepwise (N → NH → NH₂ → NH₃) by adsorbed H atoms, and NH₃ desorbs. K₂O helps the N₂ dissociation; Al₂O₃ stops the iron sintering. Gerhard Ertl’s surface-science work on this mechanism (and on CO oxidation on Pt) was recognised by the 2007 Nobel Prize in Chemistry.
Oxidation on reducible oxides (Mars–van Krevelen). The substrate is oxidised by lattice oxygen of the oxide, which is reduced (for V₂O₅, V⁵⁺ → V⁴⁺); gas-phase O₂ then reoxidises the catalyst. The oxygen in the product comes from the lattice, which isotope-labelling experiments confirm.
10. Characterising a Solid Catalyst
| Question | Technique |
|---|---|
| Total surface area, porosity | N₂ BET, pore-size distribution (Kelvin/BJH) |
| Metal surface area, dispersion | H₂ or CO chemisorption |
| Crystalline phases, crystallite size | X-ray diffraction (line broadening, Scherrer equation) |
| Surface composition, oxidation states | XPS |
| Particle size and shape | TEM, SEM |
| Adsorbed species, acid sites | IR of adsorbed CO or pyridine |
| Reducibility, binding strength | Temperature-programmed reduction and desorption (TPR, TPD) |
See Mass Spectrometry, Electron Spectroscopy and Microscopy for XPS and electron microscopy, and IR and Raman Spectroscopy for how the C–O stretch reveals terminal and bridging CO.
11. Heterogeneous vs Homogeneous Catalysis
| Feature | Heterogeneous | Homogeneous |
|---|---|---|
| Phase | Catalyst solid, reactants gas or liquid | Same phase (usually solution) |
| Separation and reuse | Easy (filtration, fixed bed) | Difficult |
| Active sites | Ill-defined, a distribution of sites | Well-defined molecular species |
| Selectivity | Often lower, tuned by support and promoters | Often high, tuned by ligands |
| Temperature range | Wide, often high | Limited by complex stability |
| Mechanistic study | Harder (surface science) | Easier (NMR, kinetics, isolated intermediates) |
| Mass transfer | Pore and film diffusion can limit | Rarely limiting |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Langmuir–Hinshelwood: both adsorbed, rate maximum | Eley–Rideal: one adsorbed, one from gas, rate saturates | |
| Promoter: increases activity or stability | Poison: decreases activity by blocking sites | |
| Structural promoter (Al₂O₃): prevents sintering | Electronic promoter (K₂O): changes binding | |
| TOF: per active site per second | Rate per gram: depends on loading and dispersion | |
| Dispersion: surface atoms / total atoms | Selectivity: desired product / reactant converted | |
| True activation energy of the surface step | Apparent activation energy from the observed rate | |
| Pore diffusion limit: \( E_{\text{app}} \approx E/2 \), depends on pellet size | Film diffusion limit: \( E_{\text{app}} \) very small, depends on flow | |
| Mars–van Krevelen: lattice O is transferred | LH oxidation: adsorbed O atoms from O₂ react | |
| Catalyst changes rate | Catalyst never changes K or ΔG° |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- State the Sabatier principle in one sentence.
- Name the catalyst and one promoter used in the Haber–Bosch process.
- Why does a catalyst not change the equilibrium constant of a reaction?
Answers
- The best catalyst binds reactants or intermediates with intermediate strength: strong enough to activate them, weak enough to release the products.
- Iron (from magnetite), promoted with K₂O (electronic) and Al₂O₃ (structural).
- K depends only on ΔG° of reactants and products, which the catalyst does not change; the catalyst lowers the barrier for the forward and reverse reactions equally (microscopic reversibility).
Level 2: Part B Style
Practice Q1. The decomposition of a gas A on a metal surface follows Langmuir kinetics with \( K_A = 0.20\ \text{kPa}^{-1} \). The order of the reaction with respect to A at \( P_A = 20 \) kPa is:
(a) 0.80 (b) 0.50 (c) 0.20 (d) 0
Answer: (c) 0.20
\( \theta_A = K_AP_A/(1 + K_AP_A) = 4/5 = 0.80 \). Order \( = 1 - \theta_A = 0.20 \). Option (a) is θ itself.
Practice Q2. For a Langmuir–Hinshelwood reaction between A and B adsorbed competitively on the same sites, the rate at fixed \( P_B \) is maximum when:
(a) \( K_AP_A = K_BP_B \) (b) \( K_AP_A = 1 + K_BP_B \) (c) \( \theta_A = 1 \) (d) \( P_A = P_B \)
Answer: (b)
Differentiating \( P_A/(1 + K_AP_A + K_BP_B)^2 \) with respect to \( P_A \) and setting it to zero gives \( 1 + K_BP_B = K_AP_A \), at which point \( \theta_A = 1/2 \). Option (a) is the condition for \( \theta_A = \theta_B \), not for the maximum at fixed \( P_B \).
Practice Q3. Which catalyst–process pair is incorrect?
(a) V₂O₅ – oxidation of SO₂ to SO₃ (b) Pt–Rh gauze – oxidation of NH₃ to NO (c) Ag – ethylene oxide from ethylene (d) ZSM-5 – Haber synthesis of ammonia
Answer: (d)
Ammonia synthesis uses promoted iron. ZSM-5 is a shape-selective zeolite used for methanol-to-gasoline and xylene isomerisation.
Practice Q4. The rate of decomposition of A on a surface is found to be proportional to \( P_A/P_B \), where B is a product. This implies:
(a) A is strongly adsorbed, B weakly (b) A is weakly adsorbed, B strongly adsorbed and occupies most sites (c) both are weakly adsorbed (d) the reaction follows an Eley–Rideal mechanism with B from the gas phase
Answer: (b)
From \( r = kK_AP_A/(1 + K_AP_A + K_BP_B) \), the form \( r \propto P_A/P_B \) needs \( K_BP_B \gg 1 + K_AP_A \): B dominates the surface, and A is sparsely adsorbed (first order).
Level 3: Part C Style
Practice Q5. A unimolecular surface decomposition has a true activation energy of 120 kJ mol⁻¹ for the surface step. The enthalpy of adsorption of the reactant is −40 kJ mol⁻¹. A product that adsorbs with an enthalpy of −60 kJ mol⁻¹ can also block sites. Which statements are correct?
- At low reactant pressure with negligible product, \( E_{\text{app}} = 80\ \text{kJ mol}^{-1} \).
- At high reactant pressure with negligible product, \( E_{\text{app}} = 120\ \text{kJ mol}^{-1} \).
- When the product covers most of the surface and the reactant is weakly adsorbed, \( E_{\text{app}} = 140\ \text{kJ mol}^{-1} \).
- Under strong pore-diffusion limitation in the high-pressure regime, \( E_{\text{app}} \) would be about 240 kJ mol⁻¹.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- Low pressure, \( r = kK_AP_A \): \( E_{\text{app}} = 120 + (-40) = 80 \). True.
- High pressure, \( r = k \): \( E_{\text{app}} = 120 \). True.
- \( r = kK_AP_A/(K_BP_B) \): \( E_{\text{app}} = 120 + (-40) - (-60) = 140 \). True.
- Pore diffusion halves the apparent activation energy (about 60 kJ mol⁻¹), it does not double it. False.
Practice Q6. The initial rate of a reaction A + B → C on a supported metal is measured at 500 K with \( P_B \) fixed at 10 kPa:
| \( P_A \) (kPa) | 2 | 5 | 10 | 20 | 40 |
|---|---|---|---|---|---|
| Rate (µmol g⁻¹ s⁻¹) | 1.3 | 2.1 | 2.4 | 2.1 | 1.5 |
Which statements are correct?
- The data are consistent with a Langmuir–Hinshelwood mechanism.
- The data are consistent with an Eley–Rideal mechanism in which A is adsorbed and B reacts from the gas phase.
- Near \( P_A = 10 \) kPa, the coverage of A is close to 0.5.
- At \( P_A = 40 \) kPa the apparent order in A is negative.
(a) 1, 3 and 4 only (b) 2 and 3 only (c) 1 and 4 only (d) 2 and 4 only
Answer: (a) 1, 3 and 4 only
- The rate passes through a maximum with \( P_A \): the hallmark of LH competition for sites. Statement 1 true.
- ER with A adsorbed gives a rate that rises and saturates with \( P_A \); it cannot fall. Statement 2 false.
- At the LH maximum \( \theta_A = 1/2 \); the maximum lies near 10 kPa. Statement 3 true.
- The rate falls from 2.1 to 1.5 as \( P_A \) doubles: \( \ln(1.5/2.1)/\ln 2 = -0.49 \), a negative order. Statement 4 true.
Practice Q7. A first-order reaction is run on catalyst pellets whose Thiele modulus is 5.0. Which statements are correct?
- The effectiveness factor is about 0.20.
- Crushing the pellets to one-tenth of their size would raise the observed rate per gram by roughly a factor of 4–5.
- The apparent activation energy measured on the large pellets is about half of the intrinsic value.
- Increasing the gas flow rate past the pellets would be the best test for pore-diffusion limitation.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- \( \eta = \tanh 5/5 = 0.200 \). True.
- Size/10 → φ = 0.5, \( \eta = \tanh 0.5/0.5 = 0.924 \); ratio 0.924/0.200 = 4.6. True.
- In the strong pore-diffusion regime (φ ≫ 1) \( E_{\text{app}} \approx E_{\text{true}}/2 \). True.
- Flow-rate changes test external film diffusion. Pore diffusion is tested by changing pellet size. False.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Steps | external diffusion, pore diffusion, adsorption, surface reaction, desorption, diffusion out |
| TOF | molecules per site per second; sites from H₂ (2 sites per H₂) or CO chemisorption |
| Unimolecular | \( r = kK_AP_A/(1+K_AP_A) \); order \( 1-\theta \): 1 at low P, 0 at high P |
| Inhibition | \( r = kK_AP_A/(K_BP_B) \) when B dominates |
| Langmuir–Hinshelwood | \( r = kK_AK_BP_AP_B/(1+K_AP_A+K_BP_B)^2 \); maximum at \( K_AP_A = 1 + K_BP_B \) |
| Eley–Rideal | \( r = kK_AP_AP_B/(1+K_AP_A) \); saturates; first order in B |
| Apparent E | strong ads: \( E \); weak ads: \( E - q_A \); inhibitor: \( E - q_A + q_B \) |
| Sabatier | intermediate binding best; volcano plot |
| Promoters | K₂O electronic, Al₂O₃ structural (Haber Fe) |
| Poisons | S, As, Pb, CO; Lindlar is a deliberate selective poison |
| Thiele | \( \eta = \tanh\phi/\phi \); large φ: η ≈ 1/φ, \( E_{\text{app}} \approx E/2 \) |
| Zeolites | Brønsted sites from Al substitution; ZSM-5 para-xylene selectivity |
| Catalysts | Fe (NH₃), Pt–Rh (HNO₃), V₂O₅ (SO₃), Cu/ZnO (CH₃OH), Fe/Co (FT), Ni (reforming, hydrogenation), Ag (EO), Pt/Pd/Rh (exhaust) |
| Mechanisms | NH₃ synthesis: N₂ dissociation is rate-determining; Mars–van Krevelen: lattice O |
Key Takeaways
What’s Next
- Quick Revision: Colloids and Surfaces: the whole chapter on one page.
- Solution-phase catalytic cycles (hydroformylation, Wilkinson hydrogenation, Monsanto acetic acid): Homogeneous Catalysis by Organometallic Complexes.
- Equilibrium yield and the temperature–pressure compromise in ammonia synthesis: Chemical Equilibrium and Le Chatelier’s Principle.
- Chapter overview: Colloids and Surfaces.