Electrochemical Cells, Redox Systems and the Nernst Equation
CSIR NET electrochemistry: cell notation, electrode types, E° and ΔG°, the Nernst equation, Latimer and Frost diagrams, pH and Ksp effects, concentration cells.
- 21 min
On this page · 16 sections
- Prerequisites
- The Hook: A Battery That Knows the Equilibrium Constant
- 1. Cells, Electrodes and Conventions
- 2. The Nernst Equation
- 3. How pH, Precipitation and Complexation Shift Potentials
- 4. Redox Systems: Latimer and Frost Diagrams
- 5. Thermodynamics From Cell Potentials
- 6. Concentration Cells and Liquid Junctions
- 7. Faraday’s Laws in One Line
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Acid–Base Concepts: pH, conjugate pairs and equilibrium constants, which reappear in every pH-dependent potential.
- Chemical Bonds and Biophysical Chemistry: the same relation \( \Delta G^{\circ\prime} = -nF\Delta E^{\circ\prime} \) seen from the biochemist’s side.
- Basic thermodynamics: \( \Delta G = \Delta H - T\Delta S \) and \( \Delta G^\circ = -RT\ln K \).
The Hook: A Battery That Knows the Equilibrium Constant
1. Cells, Electrodes and Conventions
Galvanic and electrolytic cells
| Galvanic (voltaic) cell | Electrolytic cell | |
|---|---|---|
| Energy conversion | chemical → electrical | electrical → chemical |
| Reaction | spontaneous, \( \Delta G < 0 \) | driven, \( \Delta G > 0 \) |
| Anode (oxidation) | negative terminal | positive terminal |
| Cathode (reduction) | positive terminal | negative terminal |
The definitions anode = oxidation, cathode = reduction never change. Only the sign of each terminal changes between the two kinds of cell.
Cell notation (IUPAC)
$$\text{Zn(s)} \,|\, \text{Zn}^{2+}(aq) \,\|\, \text{Cu}^{2+}(aq) \,|\, \text{Cu(s)}$$- A single bar | is a phase boundary; a double bar ‖ is a salt bridge whose junction potential is taken as eliminated; a dashed or single bar between two solutions is a liquid junction that is not eliminated.
- Species in the same phase are separated by commas: Pt | Fe³⁺, Fe²⁺.
- By convention the cell is written so that
where both are reduction potentials. The cell reaction is the one in which reduction occurs at the right-hand electrode. If \( E_{\text{cell}} > 0 \), that reaction is spontaneous as written; if \( E_{\text{cell}} < 0 \), the reverse is.
Electrode free energy and the cell potential
The reversible (zero-current) cell potential is related to the Gibbs energy of the cell reaction, for n electrons transferred per formula of reaction:
$$\boxed{\Delta G = -nFE} \qquad \boxed{\Delta G^\circ = -nFE^\circ = -RT\ln K}$$with \( F = 96\,485 \) C mol⁻¹. Combining:
$$\boxed{\ln K = \frac{nFE^\circ}{RT}} \qquad \log K = \frac{nE^\circ}{0.05916\ \text{V}} \ \ (25\ ^\circ\text{C})$$For the Daniell cell (n = 2, E° = 1.10 V): \( \Delta G^\circ = -2 \times 96\,485 \times 1.10 = -212.3 \) kJ mol⁻¹ and \( \log K = 2 \times 1.10/0.05916 = 37.2 \).
The standard hydrogen electrode and standard potentials
Single electrode potentials cannot be measured, only differences. The standard hydrogen electrode (SHE), Pt | H₂(g, 1 bar) | H⁺(a = 1), is assigned E° = 0 at all temperatures. A standard electrode potential E° is the potential of the cell SHE ‖ couple, with all species in their standard states.
Selected standard reduction potentials at 25 °C (values used on this page):
| Couple | E° / V | Couple | E° / V |
|---|---|---|---|
| Li⁺/Li | −3.04 | Cu²⁺/Cu⁺ | +0.153 |
| Zn²⁺/Zn | −0.762 | AgCl/Ag, Cl⁻ | +0.222 |
| Fe²⁺/Fe | −0.447 | Cu²⁺/Cu | +0.337 |
| 2H⁺/H₂ | 0 (definition) | Cu⁺/Cu | +0.521 |
| O₂/H₂O₂ | +0.695 | Fe³⁺/Fe²⁺ | +0.771 |
| Ag⁺/Ag | +0.799 | O₂, 4H⁺/2H₂O | +1.229 |
| Cl₂/Cl⁻ | +1.36 | MnO₄⁻, 8H⁺/Mn²⁺ | +1.51 |
| H₂O₂, 2H⁺/2H₂O | +1.776 | Br₂/Br⁻ | +1.07 |
The more positive E°, the stronger the oxidised form as an oxidant. A couple higher in the table oxidises the reduced form of any couple below it (thermodynamically; kinetics may be slow).
Types of electrode
| Type | Example | Potential depends on |
|---|---|---|
| Metal–metal ion (first kind) | Cu | Cu²⁺ | \( a_{\text{Cu}^{2+}} \) |
| Gas electrode | Pt | H₂ | H⁺; Pt | Cl₂ | Cl⁻ | gas pressure and ion activity |
| Amalgam | Na(Hg) | Na⁺ | activity of Na in Hg and of Na⁺ |
| Metal–insoluble salt–anion (second kind) | Ag | AgCl | Cl⁻; Hg | Hg₂Cl₂ | Cl⁻ | \( a_{\text{Cl}^-} \) only |
| Redox (inert metal) | Pt | Fe³⁺, Fe²⁺ | ratio \( a_{\text{Fe}^{3+}}/a_{\text{Fe}^{2+}} \) |
| Membrane | glass electrode | \( a_{\text{H}^+} \) across the membrane |
Electrodes of the second kind make good reference electrodes: with the anion activity fixed (saturated KCl), the potential is constant. The saturated calomel electrode (SCE) sits at about +0.241 V and the Ag/AgCl electrode in saturated KCl at about +0.197 V against SHE at 25 °C. The glass electrode and ion-selective electrodes are covered in Electroanalytical Methods.
2. The Nernst Equation
For a half-reaction written as a reduction, Ox + ne⁻ → Red, or for a whole cell reaction with reaction quotient Q:
$$\boxed{E = E^\circ - \frac{RT}{nF}\ln Q = E^\circ - \frac{0.05916\ \text{V}}{n}\log Q \quad (25\ ^\circ\text{C})}$$Derivation in two lines. \( \Delta G = \Delta G^\circ + RT\ln Q \). Divide by \( -nF \): \( E = E^\circ - (RT/nF)\ln Q \).
At equilibrium \( \Delta G = 0 \), so \( E = 0 \) and \( Q = K \), which recovers \( \ln K = nFE^\circ/RT \). A cell at equilibrium is a “dead battery”.
For a half-cell: \( E = E^\circ - \dfrac{0.05916}{n}\log\dfrac{a_{\text{Red}}}{a_{\text{Ox}}} \).
The numerical factor \( 2.303RT/F \) is 0.05916 V at 298.15 K. It is proportional to T: about 0.0542 V at 0 °C and about 0.0661 V at 60 °C (useful when a question gives a non-standard temperature).
Worked example. Zn | Zn²⁺(0.10) ‖ Cu²⁺(0.0010) | Cu, activities equal to concentrations.
$$E = 1.10 - \frac{0.05916}{2}\log\frac{0.10}{0.0010} = 1.10 - 0.0592 = 1.041\ \text{V}$$A hundredfold change in the quotient moves a two-electron cell by only 59 mV. Potentials are logarithmic in concentration; this is why potentiometry has a wide range and why titration end points show as sharp jumps (see Conductometric and Potentiometric Titrations).
Activities, not concentrations
Strictly the Nernst equation uses activities, \( a = \gamma\,m/m^\circ \). In ionic solutions γ is well below 1 even at millimolar concentration. Debye–Hückel theory supplies γ (see Debye–Hückel Theory). The standard way to get E° from data is to measure E at several molalities and extrapolate to zero ionic strength, where γ → 1.
Formal potential
In a specified medium (for example 1 M H₂SO₄ or 1 M HClO₄), the formal potential \( E^{\circ\prime} \) is the measured potential when the analytical concentrations of Ox and Red are equal. It absorbs activity coefficients, complexation and acid–base side reactions:
$$E = E^{\circ\prime} - \frac{0.05916}{n}\log\frac{c_{\text{Red}}}{c_{\text{Ox}}}$$Fe³⁺/Fe²⁺ has E° = 0.771 V but a formal potential of about 0.68 V in 1 M H₂SO₄, because Fe³⁺ is complexed by sulfate more strongly than Fe²⁺. Titration calculations use formal potentials.
3. How pH, Precipitation and Complexation Shift Potentials
Every chemical equilibrium that removes one partner of a redox couple shifts its potential. This is where most Part C questions live.
pH dependence
For a half-reaction Ox + mH⁺ + ne⁻ → Red + (m/2)H₂O:
$$\boxed{E = E^\circ - \frac{0.05916}{n}\log\frac{a_{\text{Red}}}{a_{\text{Ox}}} - \frac{0.05916\,m}{n}\,\text{pH}}$$The slope of E against pH is \( -0.05916\,m/n \) V per pH unit.
| Couple | m/n | Slope (V/pH) | E at unit activities other than H⁺ |
|---|---|---|---|
| 2H⁺ + 2e⁻ → H₂ | 1 | −0.0592 | \( -0.0592\,\text{pH} \) |
| O₂ + 4H⁺ + 4e⁻ → 2H₂O | 1 | −0.0592 | \( 1.229 - 0.0592\,\text{pH} \) |
| MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O | 8/5 | −0.0947 | \( 1.51 - 0.0947\,\text{pH} \) |
Consequence. At pH 3 the permanganate potential drops to \( 1.51 - 0.0947 \times 3 = 1.23 \) V, below the Cl₂/Cl⁻ potential (1.36 V). Acidic permanganate oxidises chloride at pH 0 but not at pH 3 under standard chloride conditions, while it still oxidises bromide (1.07 V) and iodide.
The two lines for H₂ and O₂ are parallel, 1.229 V apart at every pH: that is the thermodynamic stability window of water. An E–pH plot of this kind is a Pourbaix diagram. Horizontal lines are pure electron transfers (no H⁺), vertical lines are pure acid–base or precipitation steps (no electrons), and sloping lines involve both.
Precipitation: Ksp from potentials
AgCl(s) + e⁻ → Ag(s) + Cl⁻ is the Ag⁺/Ag couple with [Ag⁺] fixed by the solubility product. Subtract the two half-reactions:
$$\text{AgCl(s)} \rightleftharpoons \text{Ag}^+ + \text{Cl}^- \qquad E^\circ = E^\circ_{\text{AgCl/Ag}} - E^\circ_{\text{Ag}^+/\text{Ag}} = 0.222 - 0.799 = -0.577\ \text{V}$$$$\log K_{sp} = \frac{1 \times (-0.577)}{0.05916} = -9.75 \quad\Rightarrow\quad K_{sp} = 1.8 \times 10^{-10}$$General result for an electrode of the second kind:
$$\boxed{E^\circ_{\text{MX/M}} = E^\circ_{\text{M}^+/\text{M}} + \frac{0.05916}{n}\log K_{sp}}$$The smaller Ksp, the lower the potential: precipitating the oxidised form makes the metal easier to oxidise.
Complexation
Complexing the oxidised form lowers the potential; complexing the reduced form raises it. For a metal ion forming a complex with overall formation constant β:
$$E^\circ_{\text{complex}} = E^\circ_{\text{aqua}} - \frac{0.05916}{n}\log\frac{\beta_{\text{Ox}}}{\beta_{\text{Red}}}$$This is why cyanide lets gold dissolve in air (Au(I) is strongly stabilised as [Au(CN)₂]⁻), and why ligands that prefer a lower oxidation state (π-acceptors such as bipyridine and phenanthroline with Fe²⁺) raise the Fe(III)/Fe(II) potential. Biological electron-transfer centres tune their potentials the same way (see Biological Electron Transfer).
4. Redox Systems: Latimer and Frost Diagrams
Latimer diagrams
A Latimer diagram lists the oxidation states of an element from highest (left) to lowest (right), with the standard potential of each step written over the arrow. For copper in acid:
$$\text{Cu}^{2+} \xrightarrow{+0.153} \text{Cu}^{+} \xrightarrow{+0.521} \text{Cu}$$Combining non-adjacent steps. Add free energies, not potentials:
$$\boxed{E^\circ_{13} = \frac{n_1 E^\circ_1 + n_2 E^\circ_2}{n_1 + n_2}}$$Cu²⁺/Cu: \( (1 \times 0.153 + 1 \times 0.521)/2 = 0.337 \) V, which is the tabulated value. For iron, Fe³⁺ → Fe²⁺ (+0.771, n = 1) and Fe²⁺ → Fe (−0.447, n = 2):
$$E^\circ(\text{Fe}^{3+}/\text{Fe}) = \frac{0.771 + 2(-0.447)}{3} = -0.041\ \text{V}$$Disproportionation test. A species disproportionates if the potential on its right is greater than the potential on its left (\( E^\circ_{\text{right}} > E^\circ_{\text{left}} \)). Cu⁺ has 0.521 on its right and 0.153 on its left, so
$$2\text{Cu}^+ \rightarrow \text{Cu}^{2+} + \text{Cu} \qquad E^\circ = 0.521 - 0.153 = 0.368\ \text{V}, \quad K = 10^{0.368/0.05916} = 1.7 \times 10^{6}$$Aqueous Cu⁺ disproportionates unless stabilised by precipitation (CuI, CuCl) or complexation, or in a solvent such as acetonitrile.
Hydrogen peroxide is the other classic: O₂ → H₂O₂ (+0.695) and H₂O₂ → H₂O (+1.776). The right-hand potential is larger, so H₂O₂ disproportionates to O₂ and H₂O (slowly, catalysed by metal ions and catalase). The combined O₂/H₂O potential is \( (2 \times 0.695 + 2 \times 1.776)/4 = 1.236 \approx 1.23 \) V.
Frost diagrams
A Frost (oxidation-state) diagram plots \( NE^\circ \) for the couple X(N)/X(0) (in volts) against oxidation number N, with the element at (0, 0). Since the reduction X(N) → X(0) has \( \Delta G^\circ = -NFE^\circ \), the quantity \( NE^\circ \) equals \( \Delta G^\circ/F \) for forming X(N) from the element: the higher a point, the higher the Gibbs energy of that species.
| Feature | Meaning |
|---|---|
| Slope of the line joining two points | E° of that couple |
| Steep line rising to the right (high N) | strongly oxidising high state |
| Lowest point | the most stable oxidation state |
| A point above the line joining its neighbours | unstable to disproportionation (Cu⁺, H₂O₂, MnO₄²⁻ in acid) |
| A point below the line joining its neighbours | neighbours comproportionate to it |
Frost and Latimer diagrams carry the same information; Frost diagrams make stability visible at a glance. The lanthanide and actinide versions are discussed in Redox Chemistry of Lanthanides and Actinides.
graph LR
A["Latimer diagram
E° over each step"] --> B["Need a non-adjacent couple?
E = Σ nE / Σ n"]
A --> C["Is a species stable?
E(right) > E(left) means
it disproportionates"]
B --> D["ΔG° = -nFE°
log K = nE°/0.05916"]
C --> D5. Thermodynamics From Cell Potentials
Since \( \Delta G = -nFE \) and \( (\partial \Delta G/\partial T)_p = -\Delta S \):
$$\boxed{\Delta S^\circ = nF\left(\frac{\partial E^\circ}{\partial T}\right)_p} \qquad \boxed{\Delta H^\circ = -nF\left[E^\circ - T\left(\frac{\partial E^\circ}{\partial T}\right)_p\right]}$$The second is the Gibbs–Helmholtz equation for a cell. A positive temperature coefficient means the reaction gains entropy, and the reversible cell absorbs heat \( T\Delta S \) from the surroundings while working. A cell with \( \partial E/\partial T = 0 \) converts its enthalpy change completely into electrical work.
Fuel cell efficiency. For H₂ + ½O₂ → H₂O(l) at 25 °C, \( \Delta G^\circ = -237.1 \) kJ mol⁻¹ and \( \Delta H^\circ = -285.8 \) kJ mol⁻¹. The cell potential is \( 237\,100/(2 \times 96\,485) = 1.229 \) V and the maximum (thermodynamic) efficiency is \( \Delta G^\circ/\Delta H^\circ = 0.83 \). Unlike a heat engine, a fuel cell is not limited by the Carnot factor.
6. Concentration Cells and Liquid Junctions
In a concentration cell both electrodes involve the same couple; E° = 0 and the whole potential comes from the Nernst term.
Electrolyte concentration cell (salt bridge):
$$\text{Ag} \,|\, \text{Ag}^+(a_1) \,\|\, \text{Ag}^+(a_2) \,|\, \text{Ag} \qquad E = 0.05916\log\frac{a_2}{a_1}$$With \( a_2 = 0.10 \) and \( a_1 = 0.0010 \): E = 0.118 V. Silver dissolves on the dilute side and deposits on the concentrated side, so the cell runs until the two activities are equal.
Electrode concentration cell: two hydrogen electrodes at different pressures in the same acid, \( E = (0.05916/2)\log(p_1/p_2) \); or two amalgams of different metal content.
pH from a cell. Pt | H₂(1 bar) | H⁺(unknown) ‖ SCE gives \( E = E_{\text{SCE}} + 0.05916\,\text{pH} \), so pH rises by one unit for every 59.2 mV.
Liquid junction potentials
Where two different solutions touch directly, ions diffuse at different speeds and a small potential appears. For two solutions of the same 1:1 electrolyte (activity a₁ on the left, a₂ on the right), with transport numbers \( t_+ \) and \( t_- \):
$$E_j = (t_+ - t_-)\,\frac{RT}{F}\ln\frac{a_1}{a_2}$$A salt bridge of concentrated KCl (or NH₄NO₃) minimises \( E_j \) because \( t_+ \approx t_- \approx 0.5 \) for these salts and the bridge ions dominate the junction. HCl, with \( t_+ \approx 0.82 \), gives a large junction potential. Transport numbers and their measurement are on the Conductance and Kohlrausch’s Law page.
A concentration cell with transference (direct junction) therefore gives a potential that depends on the transport numbers. For electrodes reversible to the cation:
$$E_t = 2t_-\,\frac{RT}{F}\ln\frac{a_{\pm,2}}{a_{\pm,1}}$$and for electrodes reversible to the anion, \( t_- \) is replaced by \( t_+ \) (with the activity ratio inverted). Comparing \( E_t \) with the potential of the equivalent cell without transference (\( 2(RT/F)\ln(a_{\pm,2}/a_{\pm,1}) \) for a 1:1 electrolyte) gives a transport number directly.
7. Faraday’s Laws in One Line
The charge passed fixes the amount reacted at each electrode:
$$n = \frac{Q}{zF} = \frac{It}{zF}$$Passing 1 F deposits one mole of Ag, half a mole of Cu, a third of a mole of Al. The same law underlies coulometry and the Hittorf method for transport numbers.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| \( E^\circ \): all species at unit activity | \( E^{\circ\prime} \) (formal): equal analytical concentrations in a stated medium | |
| \( E^\circ \) is intensive (does not scale with coefficients) | \( \Delta G^\circ \) is extensive (doubles when the equation doubles) | |
| Anode in a galvanic cell: negative terminal | anode in an electrolytic cell: positive terminal | |
| Concentration cell without transference (salt bridge) | with transference (direct junction; depends on \( t_\pm \)) | |
| Frost point above the line of its neighbours: disproportionates | point below the line: formed by comproportionation | |
| Electrode of the first kind: responds to the cation | second kind (Ag/AgCl): responds to the anion |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Use \( F = 96\,485 \) C mol⁻¹, T = 298.15 K and 2.303RT/F = 0.05916 V unless stated.
Level 1: Foundation
- Calculate ΔG° for a two-electron cell reaction with E° = 1.10 V.
- What is the value of 2.303RT/F at 25 °C?
- In Pt | H₂ | H⁺ ‖ Ag⁺ | Ag, at which electrode does reduction occur?
Answers
- \( \Delta G^\circ = -2 \times 96\,485 \times 1.10 = -2.12 \times 10^5 \) J mol⁻¹ = −212 kJ mol⁻¹.
- 0.05916 V (8.314 × 298.15 × 2.303 / 96 485).
- At the right-hand (silver) electrode: Ag⁺ + e⁻ → Ag. The hydrogen electrode on the left is the anode.
Level 2: Part B Style
Practice Q1. For Zn | Zn²⁺(0.10 M) ‖ Cu²⁺(0.0010 M) | Cu with E° = 1.10 V (activities equal to concentrations), the cell potential at 25 °C is closest to:
(a) 1.159 V (b) 1.100 V (c) 1.041 V (d) 0.982 V
Answer: (c)
Cell reaction Zn + Cu²⁺ → Zn²⁺ + Cu, n = 2, \( Q = [\text{Zn}^{2+}]/[\text{Cu}^{2+}] = 100 \).
\( E = 1.10 - (0.05916/2)\log 100 = 1.10 - 0.0592 = 1.041 \) V. Option (a) inverts Q; option (d) uses n = 1.
Practice Q2. Given E°(Cu²⁺/Cu⁺) = 0.153 V and E°(Cu⁺/Cu) = 0.521 V, the equilibrium constant for 2Cu⁺(aq) ⇌ Cu²⁺(aq) + Cu(s) at 25 °C is about:
(a) \( 1.7 \times 10^{6} \) (b) \( 6.0 \times 10^{-7} \) (c) \( 1.3 \times 10^{3} \) (d) \( 2.8 \times 10^{12} \)
Answer: (a)
Reduction Cu⁺ → Cu (0.521 V) at the cathode, oxidation Cu⁺ → Cu²⁺ (reverse of 0.153 V) at the anode. \( E^\circ = 0.521 - 0.153 = 0.368 \) V, n = 1.
\( \log K = 0.368/0.05916 = 6.22 \), \( K = 1.7 \times 10^{6} \). Option (b) is the reciprocal (comproportionation constant); (d) uses n = 2.
Practice Q3. Using E°(Fe³⁺/Fe²⁺) = +0.771 V and E°(Fe²⁺/Fe) = −0.447 V, E°(Fe³⁺/Fe) is:
(a) +0.324 V (b) +0.162 V (c) −0.041 V (d) −0.123 V
Answer: (c)
\( E^\circ = [1(0.771) + 2(-0.447)]/3 = (0.771 - 0.894)/3 = -0.041 \) V. Option (a) is the simple sum, (b) the simple average.
Practice Q4. Given E°(Ag⁺/Ag) = 0.799 V and E°(AgCl/Ag, Cl⁻) = 0.222 V, Ksp of AgCl at 25 °C is about:
(a) \( 1.8 \times 10^{-10} \) (b) \( 1.3 \times 10^{-5} \) (c) \( 3.2 \times 10^{-20} \) (d) \( 5.6 \times 10^{9} \)
Answer: (a)
AgCl → Ag⁺ + Cl⁻ is AgCl/Ag (cathode) minus Ag⁺/Ag (anode): \( E^\circ = 0.222 - 0.799 = -0.577 \) V.
\( \log K_{sp} = -0.577/0.05916 = -9.75 \), \( K_{sp} = 1.8 \times 10^{-10} \). Option (b) is the molar solubility \( \sqrt{K_{sp}} \).
Level 3: Part C Style
Practice Q5. A cell with n = 2 has E° = 0.6750 V at 298.15 K and \( (\partial E^\circ/\partial T)_p = -6.5 \times 10^{-4} \) V K⁻¹ (hypothetical data). Which set of values is correct for the cell reaction?
(a) ΔG° = −130.3 kJ mol⁻¹, ΔS° = −125.4 J K⁻¹ mol⁻¹, ΔH° = −167.7 kJ mol⁻¹ (b) ΔG° = −65.1 kJ mol⁻¹, ΔS° = −62.7 J K⁻¹ mol⁻¹, ΔH° = −83.8 kJ mol⁻¹ (c) ΔG° = −130.3 kJ mol⁻¹, ΔS° = +125.4 J K⁻¹ mol⁻¹, ΔH° = −92.9 kJ mol⁻¹ (d) ΔG° = −130.3 kJ mol⁻¹, ΔS° = −125.4 J K⁻¹ mol⁻¹, ΔH° = −92.9 kJ mol⁻¹
Answer: (a)
- \( \Delta G^\circ = -nFE^\circ = -2 \times 96\,485 \times 0.6750 = -130\,255 \) J mol⁻¹ = −130.3 kJ mol⁻¹.
- \( \Delta S^\circ = nF(\partial E^\circ/\partial T) = 2 \times 96\,485 \times (-6.5 \times 10^{-4}) = -125.4 \) J K⁻¹ mol⁻¹.
- \( \Delta H^\circ = \Delta G^\circ + T\Delta S^\circ = -130.26 + 298.15 \times (-0.1254) = -167.7 \) kJ mol⁻¹.
The reaction loses entropy, so the reversible cell releases heat \( |T\Delta S^\circ| \approx 37.4 \) kJ mol⁻¹ to the surroundings in addition to its electrical work. Option (b) uses n = 1; (c) and (d) mishandle the sign of ΔS° or of \( T\Delta S^\circ \).
Practice Q6. E°(MnO₄⁻, H⁺/Mn²⁺) = 1.51 V, E°(Cl₂/Cl⁻) = 1.36 V, E°(Br₂/Br⁻) = 1.07 V, E°(O₂, H⁺/H₂O) = 1.229 V. Take all species other than H⁺ at unit activity. Which statements are correct?
- The potential of the MnO₄⁻/Mn²⁺ couple falls by about 95 mV per pH unit.
- At pH 3, permanganate can still oxidise Cl⁻ to Cl₂.
- At pH 3, permanganate can still oxidise Br⁻ to Br₂.
- At pH 0, permanganate is thermodynamically able to oxidise water to O₂, even though its acidic solutions keep for weeks.
(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 3 and 4 only
- Correct. m = 8, n = 5: slope \( = 0.05916 \times 8/5 = 0.0947 \) V per pH.
- Wrong. At pH 3, \( E = 1.51 - 0.0947 \times 3 = 1.226 \) V < 1.36 V.
- Correct. 1.226 V > 1.07 V.
- Correct. 1.51 V > 1.229 V, so the oxidation of water is favourable; it is kinetically slow, which is why permanganate solutions keep. (Both lines fall with pH, permanganate faster: the gap \( 0.281 - 0.0355\,\text{pH} \) V closes near pH 7.9 for these half-reactions.)
Practice Q7. Consider the cell Ag | Ag⁺(0.0010 M) ‖ Ag⁺(0.10 M) | Ag at 25 °C (activities equal to concentrations, ideal salt bridge). Which statements are correct?
- The cell potential is about 0.118 V.
- Silver dissolves at the left electrode.
- If the salt bridge were replaced by a direct junction of the two AgNO₃ solutions, the potential would change, and the change depends on the transport numbers of Ag⁺ and NO₃⁻.
- The standard potential of this cell is 0.799 V.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. \( E = 0.05916\log(0.10/0.0010) = 0.118 \) V.
- Correct. Oxidation (Ag → Ag⁺) at the left, dilute side, raises its concentration towards equality.
- Correct. With a direct junction, a junction potential \( (t_+ - t_-)(RT/F)\ln(a_1/a_2) \) is added; the total becomes \( 2t_-(RT/F)\ln(a_{\pm,2}/a_{\pm,1}) \).
- Wrong. Both electrodes are the same couple: E° = 0.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Cell convention | \( E_{\text{cell}} = E_{\text{right}} - E_{\text{left}} \) (both reduction) |
| Free energy | \( \Delta G = -nFE \); \( \Delta G^\circ = -nFE^\circ = -RT\ln K \) |
| Equilibrium constant | \( \log K = nE^\circ/0.05916 \) at 25 °C |
| Nernst | \( E = E^\circ - (0.05916/n)\log Q \) |
| pH slope | \( -0.05916\,m/n \) V per pH |
| Water window | 1.229 V wide at every pH |
| Ksp from E° | \( E^\circ_{\text{MX/M}} = E^\circ_{\text{M}^+/\text{M}} + (0.05916/n)\log K_{sp} \) |
| Combining steps | \( E^\circ = \Sigma n_iE^\circ_i/\Sigma n_i \) |
| Disproportionation | \( E^\circ_{\text{right}} > E^\circ_{\text{left}} \) (Cu⁺, H₂O₂) |
| Entropy, enthalpy | \( \Delta S^\circ = nF\,\partial E^\circ/\partial T \); \( \Delta H^\circ = -nF(E^\circ - T\,\partial E^\circ/\partial T) \) |
| Concentration cell | E° = 0; \( E = (0.05916/n)\log(a_2/a_1) \) |
| Junction (1:1) | \( E_j = (t_+ - t_-)(RT/F)\ln(a_1/a_2) \); KCl bridge minimises it |
| Reference electrodes | SHE 0; SCE about +0.241 V; Ag/AgCl (sat. KCl) about +0.197 V |
| Fuel cell H₂/O₂ | 1.229 V; ΔG°/ΔH° = 0.83 |
Key Takeaways
What’s Next
- Debye–Hückel Theory and Activity Coefficients: why activities differ from concentrations and how to calculate γ±.
- Conductance and Kohlrausch’s Law: ions moving under a field, transport numbers and limiting conductivities.
- Conductometric and Potentiometric Titrations: the Nernst equation applied point by point along a titration.
- The chapter on one page: Electrochemistry: Quick Revision.