Ionic Equilibria: pH, Hydrolysis, Buffers and Solubility
CSIR NET ionic equilibria: Kw and pH, weak acids and bases, salt hydrolysis, buffers and buffer capacity, polyprotic acids, Ksp, common ion and complexation.
- 16 min
On this page · 17 sections
- Prerequisites
- The Hook: The pH of 10⁻⁸ M Hydrochloric Acid
- 1. Water, pH and the Systematic Method
- 2. Weak Acids and Bases
- 3. Salt Hydrolysis
- 4. Buffers
- 5. Polyprotic Acids and Amphiprotic Species
- 6. Solubility Equilibria
- 7. Acid–Base Indicators
- 8. Activity Corrections
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Acid–Base Concepts: Brønsted pairs, \( K_aK_b = K_w \) and levelling.
- Debye–Hückel Theory and Activity Coefficients: why “concentration” constants drift with ionic strength.
- Chemical Bonds and Biophysical Chemistry: the same buffer arithmetic applied to biological pH.
The Hook: The pH of 10⁻⁸ M Hydrochloric Acid
1. Water, pH and the Systematic Method
Autoionisation of water
$$\text{H}_2\text{O} \rightleftharpoons \text{H}^+ + \text{OH}^- \qquad K_w = [\text{H}^+][\text{OH}^-] = 1.0 \times 10^{-14}\ \text{at } 25\ ^\circ\text{C}$$\( \text{pH} = -\log a_{\text{H}^+} \), and \( \text{pH} + \text{pOH} = \text{p}K_w = 14.00 \) at 25 °C. Autoionisation is endothermic, so \( K_w \) increases with temperature: neutral water above 25 °C has pH below 7 while remaining neutral (\( [\text{H}^+] = [\text{OH}^-] \)).
The systematic method
- Equilibria: every \( K_a \), \( K_b \), \( K_{sp} \), \( \beta \) and \( K_w \) that applies.
- Mass balance: total analytical concentration of each component.
- Charge balance: \( \sum z_i[\text{cations}] = \sum |z_i|[\text{anions}] \).
- Approximate, solve, and check every approximation (usually: is the neglected term below 5% of the kept one?).
Example: \( 1.0 \times 10^{-8} \) M HCl. Charge balance: \( [\text{H}^+] = [\text{Cl}^-] + [\text{OH}^-] = c + K_w/[\text{H}^+] \). So \( [\text{H}^+]^2 - c[\text{H}^+] - K_w = 0 \):
$$[\text{H}^+] = \frac{c + \sqrt{c^2 + 4K_w}}{2} = 1.05 \times 10^{-7}\ \text{M}, \qquad \text{pH} = 6.98$$2. Weak Acids and Bases
For HA at concentration c with dissociation constant \( K_a \):
$$K_a = \frac{[\text{H}^+][\text{A}^-]}{[\text{HA}]} = \frac{c\alpha^2}{1-\alpha}$$| Condition | Result |
|---|---|
| α ≪ 1 (\( c/K_a > \) about 100) | \( [\text{H}^+] = \sqrt{K_ac} \), \( \text{pH} = \tfrac12\text{p}K_a - \tfrac12\log c \) |
| α not small | solve \( [\text{H}^+]^2 + K_a[\text{H}^+] - K_ac = 0 \) |
| Very weak or very dilute acid | include water: \( [\text{H}^+] = \sqrt{K_ac + K_w} \) |
0.10 M acetic acid (pKa 4.76): \( \text{pH} = 2.38 + 0.50 = 2.88 \), α = 1.3%.
For a weak base B: \( [\text{OH}^-] = \sqrt{K_bc} \), \( \text{pOH} = \tfrac12\text{p}K_b - \tfrac12\log c \). For a conjugate pair in water, \( K_aK_b = K_w \), \( \text{p}K_a + \text{p}K_b = 14.00 \).
Ostwald’s dilution law is the same equation read from the conductance side (\( \alpha = \Lambda_m/\Lambda_m^\circ \)); see Conductance and Kohlrausch’s Law.
3. Salt Hydrolysis
A salt is fully dissociated; if one of its ions is the conjugate of a weak acid or base, it reacts with water. For CH₃COO⁻:
$$\text{A}^- + \text{H}_2\text{O} \rightleftharpoons \text{HA} + \text{OH}^- \qquad K_h = \frac{K_w}{K_a}$$and the degree of hydrolysis is \( h \approx \sqrt{K_h/c} \).
| Salt of | Example | Solution | pH (25 °C) | Degree of hydrolysis h |
|---|---|---|---|---|
| strong acid + strong base | NaCl | neutral | 7 | none |
| weak acid + strong base | CH₃COONa | basic | \( 7 + \tfrac12\text{p}K_a + \tfrac12\log c \) | \( \sqrt{K_w/(K_ac)} \) |
| strong acid + weak base | NH₄Cl | acidic | \( 7 - \tfrac12\text{p}K_b - \tfrac12\log c \) | \( \sqrt{K_w/(K_bc)} \) |
| weak acid + weak base | CH₃COONH₄ | depends on \( K_a \) vs \( K_b \) | \( 7 + \tfrac12\text{p}K_a - \tfrac12\text{p}K_b \) | \( \sqrt{K_w/(K_aK_b)} \), independent of c |
Examples. 0.10 M CH₃COONa: pH = 7 + 2.38 − 0.50 = 8.88, h = \( 7.6 \times 10^{-5} \). 0.10 M NH₄Cl (pKb of NH₃ 4.75): pH = 7 − 2.375 + 0.50 = 5.13. Ammonium acetate: pH = 7 + ½(4.76 − 4.75) ≈ 7.0 at any concentration, although both ions hydrolyse.
Hydrolysis of metal aqua ions (Fe³⁺, Al³⁺) is the same idea seen from the cation; see Strength of Acids and Bases.
4. Buffers
A buffer is a solution of a weak acid and its conjugate base (or a weak base and its conjugate acid) at comparable concentrations. From the \( K_a \) expression, when both are present in amounts much larger than \( [\text{H}^+] \) and \( [\text{OH}^-] \):
$$\boxed{\text{pH} = \text{p}K_a + \log\frac{[\text{A}^-]}{[\text{HA}]}} \qquad \text{(Henderson–Hasselbalch)}$$0.10 M CH₃COOH + 0.20 M CH₃COONa: pH = 4.76 + log 2 = 5.06. Dilution does not change the ratio, so the pH of a buffer is (to this approximation) independent of dilution.
Adding strong acid or base converts one partner into the other mole for mole. Work in moles, then take the ratio.
Buffer capacity
The buffer capacity β is the amount of strong base (mol L⁻¹) needed to raise the pH by one unit:
$$\beta = \frac{dC_b}{d\,\text{pH}} = 2.303\left([\text{H}^+] + [\text{OH}^-] + \frac{C\,K_a[\text{H}^+]}{(K_a + [\text{H}^+])^2}\right)$$where C is the total buffer concentration ([HA] + [A⁻]). The last term has its maximum at pH = pKa, where it equals \( 2.303C/4 = 0.576C \). So:
- A buffer works best at pH = pKa, and usefully within about pKa ± 1.
- Capacity is proportional to the total concentration: diluting a buffer leaves its pH but lowers its capacity.
- Very strong acid or base solutions (the \( [\text{H}^+] \) and \( [\text{OH}^-] \) terms) also resist pH change, but they are not buffers in the useful sense.
5. Polyprotic Acids and Amphiprotic Species
For H₂A with \( K_{a1} \gg K_{a2} \):
- A solution of H₂A alone: pH from \( K_{a1} \) only (treat as monoprotic); then \( [\text{A}^{2-}] \approx K_{a2} \), independent of c.
- A solution of the amphiprotic salt NaHA:
valid when c is much larger than \( K_{a1} \) and \( K_w/K_{a2} \). NaHCO₃ (pKa 6.35 and 10.33): pH ≈ 8.34. NaH₂PO₄ (2.15 and 7.20): pH ≈ 4.7. Na₂HPO₄ (7.20 and 12.35): pH ≈ 9.8.
Fractions of species
With \( D = [\text{H}^+]^2 + K_{a1}[\text{H}^+] + K_{a1}K_{a2} \):
$$\alpha_{\text{H}_2\text{A}} = \frac{[\text{H}^+]^2}{D}, \qquad \alpha_{\text{HA}^-} = \frac{K_{a1}[\text{H}^+]}{D}, \qquad \alpha_{\text{A}^{2-}} = \frac{K_{a1}K_{a2}}{D}$$At pH = pKa₁, H₂A and HA⁻ are equal; at pH = pKa₂, HA⁻ and A²⁻ are equal; at \( \tfrac12(\text{p}K_{a1} + \text{p}K_{a2}) \), HA⁻ is at its maximum. These distribution diagrams tell you which species to use in any buffer or titration calculation.
6. Solubility Equilibria
Solubility product
For \( \text{M}_x\text{A}_y(s) \rightleftharpoons x\text{M}^{y+} + y\text{A}^{x-} \):
$$K_{sp} = [\text{M}^{y+}]^x[\text{A}^{x-}]^y = x^xy^y\,s^{x+y}$$| Type | Example | Ksp in terms of s | s |
|---|---|---|---|
| AB | AgCl | \( s^2 \) | \( \sqrt{K_{sp}} \) |
| AB₂ or A₂B | CaF₂, Ag₂CrO₄ | \( 4s^3 \) | \( (K_{sp}/4)^{1/3} \) |
| AB₃ | Fe(OH)₃ | \( 27s^4 \) | \( (K_{sp}/27)^{1/4} \) |
| A₂B₃ | Bi₂S₃ | \( 108s^5 \) | \( (K_{sp}/108)^{1/5} \) |
Compare solubilities of salts of different type through s, never through Ksp: AgCl (Ksp \( 1.8 \times 10^{-10} \), \( s = 1.3 \times 10^{-5} \) M) is less soluble than Ag₂CrO₄ (Ksp about \( 1.1 \times 10^{-12} \), \( s = 6.5 \times 10^{-5} \) M), although its Ksp is larger.
Precipitation criterion
The ionic product Q (same form as Ksp, with actual concentrations): Q > Ksp, precipitation; Q = Ksp, saturated; Q < Ksp, more dissolves.
Common-ion effect
Adding an ion already present suppresses solubility through mass action. For CaF₂ (take Ksp = \( 4.0 \times 10^{-11} \)): in water \( s = (K_{sp}/4)^{1/3} = 2.2 \times 10^{-4} \) M; in 0.010 M NaF, \( s = K_{sp}/(0.010)^2 = 4.0 \times 10^{-7} \) M, about 500 times less.
The same mass action suppresses the ionisation of a weak acid when its salt is added (the basis of buffers), and of NH₃ when NH₄Cl is added (used in group separations in qualitative analysis).
pH-dependent solubility
If the anion is the conjugate base of a weak acid (F⁻, CO₃²⁻, S²⁻, C₂O₄²⁻, PO₄³⁻, OH⁻), lowering the pH removes it as HA and increases solubility. For a salt MA:
$$s = \sqrt{K_{sp}\left(1 + \frac{[\text{H}^+]}{K_a}\right)}$$This is why metal sulfides are separated by controlling [H⁺]: in acid only the most insoluble sulfides precipitate.
Complex formation
A ligand that binds the metal increases solubility. For AgCl in ammonia:
$$\text{AgCl(s)} + 2\text{NH}_3 \rightleftharpoons [\text{Ag(NH}_3)_2]^+ + \text{Cl}^- \qquad K = K_{sp}\,\beta_2$$At high halide concentration the same principle makes AgCl more soluble in concentrated chloride ([AgCl₂]⁻ forms), so the solubility of AgCl against [Cl⁻] passes through a minimum.
Selective (fractional) precipitation
When two ions precipitate with the same reagent, the one whose Ksp is reached at the lower reagent concentration precipitates first. Mohr’s method uses this: Cl⁻ is titrated with Ag⁺ in the presence of a little CrO₄²⁻; red Ag₂CrO₄ appears only after almost all the Cl⁻ is gone (Practice Q6).
7. Acid–Base Indicators
An indicator is a weak acid HIn whose two forms have different colours:
$$\text{pH} = \text{p}K_{\text{In}} + \log\frac{[\text{In}^-]}{[\text{HIn}]}$$The eye sees a change when the ratio goes from about 1:10 to 10:1, so the colour change range is about pK_In ± 1.
| Indicator | Approximate range | Use |
|---|---|---|
| Methyl orange | 3.1–4.4 | strong acid vs weak base |
| Methyl red | 4.4–6.2 | strong acid vs weak base |
| Phenolphthalein | 8.3–10.0 | weak acid vs strong base |
The indicator must change within the steep part of the titration curve. For strong acid against strong base, both kinds work; for a weak acid against a weak base there is no sharp jump, and a conductometric end point is better (see Conductometric and Potentiometric Titrations).
8. Activity Corrections
All constants above are thermodynamic constants written with concentrations. In solutions of appreciable ionic strength, replace concentrations by activities: a neutral weak acid has an apparent pKa lower by about \( 2A\sqrt{I} \), and sparingly soluble salts are slightly more soluble in inert electrolyte (salting-in). Both are calculated on the Debye–Hückel page.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Common-ion effect: lowers solubility strongly | salting-in by inert salt: raises solubility slightly | |
| Buffer pH: independent of dilution | buffer capacity: proportional to concentration | |
| Ksp comparison valid for the same salt type | solubility s comparison for different types | |
| Degree of dissociation of a weak acid (α ≈ \( \sqrt{K_a/c} \)) | degree of hydrolysis of its salt (h ≈ \( \sqrt{K_w/(K_ac)} \)) | |
| Neutral water: \( [\text{H}^+] = [\text{OH}^-] \) | pH 7: only at 25 °C | |
| Complexing agent: raises solubility | common ion: lowers it |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Take 25 °C, \( K_w = 1.0 \times 10^{-14} \), pKa(CH₃COOH) = 4.76 and pKb(NH₃) = 4.75 unless stated.
Level 1: Foundation
- pH of 0.10 M acetic acid?
- pH of 0.10 M NH₄Cl?
- pH of a buffer containing 0.10 M CH₃COOH and 0.20 M CH₃COONa?
Answers
- \( \text{pH} = \tfrac12(4.76) - \tfrac12\log 0.10 = 2.38 + 0.50 = \) 2.88.
- \( \text{pH} = 7 - \tfrac12(4.75) - \tfrac12\log 0.10 = 7 - 2.375 + 0.50 = \) 5.13.
- \( \text{pH} = 4.76 + \log 2 = \) 5.06.
Level 2: Part B Style
Practice Q1. The pH of \( 1.0 \times 10^{-8} \) M aqueous HCl at 25 °C is:
(a) 8.00 (b) 7.00 (c) 6.98 (d) 6.00
Answer: (c)
\( [\text{H}^+] = (c + \sqrt{c^2 + 4K_w})/2 = (10^{-8} + \sqrt{10^{-16} + 4 \times 10^{-14}})/2 = 1.05 \times 10^{-7} \) M; pH = 6.98. Option (a) ignores water and gives an absurd basic acid; (b) ignores the acid.
Practice Q2. The pH of 0.10 M sodium acetate is:
(a) 5.12 (b) 7.00 (c) 8.88 (d) 9.38
Answer: (c)
\( \text{pH} = 7 + \tfrac12(4.76) + \tfrac12\log 0.10 = 7 + 2.38 - 0.50 = 8.88 \). Option (d) adds \( \tfrac12\log c \) with the wrong sign.
Practice Q3. Taking Ksp(CaF₂) = \( 4.0 \times 10^{-11} \), the molar solubility of CaF₂ in 0.010 M NaF is:
(a) \( 2.2 \times 10^{-4} \) M (b) \( 4.0 \times 10^{-9} \) M (c) \( 4.0 \times 10^{-7} \) M (d) \( 6.3 \times 10^{-6} \) M
Answer: (c)
\( [\text{Ca}^{2+}] = s \), \( [\text{F}^-] \approx 0.010 \). \( s = K_{sp}/(0.010)^2 = 4.0 \times 10^{-11}/1.0 \times 10^{-4} = 4.0 \times 10^{-7} \) M. Option (a) is the solubility in pure water; (b) forgets the square.
Practice Q4. The pH of 0.10 M NaHCO₃ (pKa₁ = 6.35, pKa₂ = 10.33 for H₂CO₃) is closest to:
(a) 5.68 (b) 8.34 (c) 9.67 (d) 11.67
Answer: (b)
HCO₃⁻ is amphiprotic: pH ≈ ½(6.35 + 10.33) = 8.34, independent of concentration over a wide range. Option (d) applies the salt formula \( 7 + \tfrac12\text{p}K_a + \tfrac12\log c \) with pKa₂, as if the solution were Na₂CO₃; option (c) applies the same formula with pKa₁.
Level 3: Part C Style
Practice Q5. 100 mL of a buffer is 0.10 M in CH₃COOH and 0.10 M in CH₃COONa. 1.0 mL of 1.0 M HCl is added. Which statements are correct?
- The pH falls from 4.76 to about 4.67.
- The same HCl added to 100 mL of pure water would give pH about 2.0.
- The maximum buffer capacity of this buffer is about 0.115 mol L⁻¹ per pH unit.
- Diluting the original buffer tenfold with water would change its pH by about one unit.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. Moles: HA 0.010 + 0.001 = 0.011; A⁻ 0.010 − 0.001 = 0.009. pH = 4.76 + log(9/11) = 4.76 − 0.087 = 4.67.
- Correct. \( [\text{H}^+] = 0.0010/0.101 = 9.9 \times 10^{-3} \) M, pH 2.00.
- Correct. C = 0.20 M; \( \beta_{\max} = 0.576 \times 0.20 = 0.115 \) mol L⁻¹ pH⁻¹. Check: the 0.0099 M of acid added should move the pH by about 0.0099/0.115 = 0.086, matching statement 1.
- Wrong. Dilution leaves the ratio, so the pH stays near 4.76 (only the capacity falls tenfold).
Practice Q6 (Mohr’s method). A solution is 0.010 M in Cl⁻ and 0.010 M in CrO₄²⁻. AgNO₃ is added slowly (volume change negligible). Take Ksp(AgCl) = \( 1.8 \times 10^{-10} \) and Ksp(Ag₂CrO₄) = \( 1.1 \times 10^{-12} \). Which statements are correct?
- AgCl begins to precipitate when [Ag⁺] reaches \( 1.8 \times 10^{-8} \) M.
- Ag₂CrO₄ begins to precipitate when [Ag⁺] reaches about \( 1.0 \times 10^{-5} \) M.
- When Ag₂CrO₄ first appears, less than 0.2% of the original chloride remains in solution.
- Ag₂CrO₄ precipitates first because its Ksp is smaller.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. \( [\text{Ag}^+] = 1.8 \times 10^{-10}/0.010 = 1.8 \times 10^{-8} \) M.
- Correct. \( [\text{Ag}^+] = \sqrt{1.1 \times 10^{-12}/0.010} = 1.05 \times 10^{-5} \) M.
- Correct. Then \( [\text{Cl}^-] = 1.8 \times 10^{-10}/1.05 \times 10^{-5} = 1.7 \times 10^{-5} \) M, which is 0.17% of 0.010 M.
- Wrong. The reagent concentration needed is what matters; AgCl needs about 600 times less Ag⁺ and precipitates first. This is why chromate works as the end-point indicator.
Practice Q7. Estimate the solubility of AgCl in 1.0 M aqueous NH₃, given Ksp(AgCl) = \( 1.8 \times 10^{-10} \) and \( \beta_2 \)([Ag(NH₃)₂]⁺) = \( 1.6 \times 10^{7} \) (values given for this problem). Which is closest?
(a) \( 1.3 \times 10^{-5} \) M (b) \( 2.9 \times 10^{-3} \) M (c) 0.048 M (d) 0.54 M
Answer: (c)
AgCl + 2NH₃ ⇌ [Ag(NH₃)₂]⁺ + Cl⁻, \( K = K_{sp}\beta_2 = 2.88 \times 10^{-3} \).
With solubility s: \( [\text{complex}] = [\text{Cl}^-] = s \), \( [\text{NH}_3] = 1.0 - 2s \). So \( s^2/(1.0 - 2s)^2 = K \), \( s/(1 - 2s) = \sqrt{K} = 0.0537 \), \( s = 0.0537/1.107 = 0.048 \) M.
That is about 3600 times the solubility in water (option (a)). Option (b) is K itself; neglecting the 2s in the ammonia balance would give 0.054 M, close but slightly high.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Water | \( K_w = 1.0 \times 10^{-14} \) (25 °C); increases with T |
| Weak acid | \( [\text{H}^+] = \sqrt{K_ac} \) (α small); exact quadratic otherwise |
| Very dilute strong acid | \( [\text{H}^+] = (c + \sqrt{c^2 + 4K_w})/2 \) |
| Salt WA + SB | pH = 7 + ½pKa + ½log c |
| Salt SA + WB | pH = 7 − ½pKb − ½log c |
| Salt WA + WB | pH = 7 + ½pKa − ½pKb; \( h = \sqrt{K_w/K_aK_b} \) |
| Henderson–Hasselbalch | pH = pKa + log([A⁻]/[HA]) |
| Buffer capacity | max 0.576C at pH = pKa; range pKa ± 1 |
| Amphiprotic | pH ≈ ½(pKa₁ + pKa₂); NaHCO₃ 8.34 |
| Ksp | AB s², AB₂ 4s³, AB₃ 27s⁴, A₂B₃ 108s⁵ |
| Common ion | CaF₂ in NaF: \( s = K_{sp}/[\text{F}^-]^2 \) |
| Complexation | \( K = K_{sp}\beta \); AgCl dissolves in NH₃ |
| Weak-acid anion | solubility rises as pH falls: \( s = \sqrt{K_{sp}(1 + [\text{H}^+]/K_a)} \) |
| Indicators | range pK_In ± 1; methyl orange 3.1–4.4, phenolphthalein 8.3–10.0 |
Key Takeaways
What’s Next
- Conductometric and Potentiometric Titrations: these equilibria followed point by point along a titration.
- Non-aqueous Solvents: what changes when the solvent is not water.
- Back to Debye–Hückel Theory for activity corrections.
- The chapter on one page: Electrochemistry: Quick Revision.