Tropospheric Chemistry: Smog, Acid Rain and the Greenhouse Effect
CSIR NET chemistry: OH radical, NOx photostationary state, photochemical and sulfurous smog, PAN, acid rain pH, particulates, converters, greenhouse gases.
- 22 min
On this page · 18 sections
- Prerequisites
- The Hook: Two Kinds of Smog
- 1. Primary and Secondary Pollutants
- 2. The Hydroxyl Radical: Detergent of the Troposphere
- 3. The NOₓ Photostationary State
- 4. Photochemical Smog
- 5. Acid Rain
- 6. Vehicle Exhaust and the Three-Way Catalytic Converter
- 7. Particulate Matter
- 8. The Greenhouse Effect
- 9. Indoor Air Pollution
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- The Atmosphere and Stratospheric Ozone: layers, photolysis thresholds, mixing ratios and number densities.
- Ionic Equilibria: the pH of rain is a Henry’s-law-plus-weak-acid calculation.
- IR and Raman Selection Rules: only vibrations that change the dipole moment absorb infrared, which decides which gases are greenhouse gases.
- Principles of Catalysis: the three-way converter and selective catalytic reduction are heterogeneous catalysis at work.
The Hook: Two Kinds of Smog
1. Primary and Secondary Pollutants
A primary pollutant is emitted directly (CO, NO, SO₂, hydrocarbons, soot). A secondary pollutant forms in the air from primary ones (O₃, NO₂ mostly, PAN, H₂SO₄, HNO₃, secondary organic aerosol). Ground-level ozone is the classic secondary pollutant: no significant source emits it.
| Pollutant | Main anthropogenic sources | Key effect |
|---|---|---|
| CO | incomplete combustion, vehicles, biomass burning | binds haemoglobin as carboxyhaemoglobin, many times more strongly than O₂ |
| NOₓ (NO + NO₂) | high-temperature combustion: N₂ + O₂ → 2NO in engines and furnaces; fuel nitrogen | smog precursor; NO₂ is a respiratory irritant; forms HNO₃ |
| SO₂ | burning sulfur-containing coal and oil; smelting sulfide ores | respiratory irritant; forms H₂SO₄ and sulfate aerosol |
| VOCs (hydrocarbons, aldehydes) | vehicle exhaust, evaporation of fuels and solvents; also natural isoprene and terpenes | with NOₓ and sunlight, form O₃ and PAN |
| Particulate matter | combustion, dust, construction, secondary sulfate and nitrate | lung and heart disease; haze; climate effects |
| Pb | (historically) tetraethyllead in petrol | neurotoxin; also poisons catalytic converters |
ppm and μg m⁻³
Air-quality standards are often in μg m⁻³, while chemists think in ppm. At 25 °C and 1 atm the molar volume is 24.45 L, so
$$\boxed{c\ (\mu\text{g m}^{-3}) = \frac{\text{ppm} \times M\ (\text{g mol}^{-1}) \times 1000}{24.45}}$$2. The Hydroxyl Radical: Detergent of the Troposphere
Most trace gases are removed by oxidation, and the main daytime oxidant is OH. It forms from ozone photolysis:
$$\text{O}_3 + h\nu\ (\lambda \lesssim 320 \text{ nm}) \rightarrow \text{O}(^1\text{D}) + \text{O}_2$$$$\text{O}(^1\text{D}) + \text{H}_2\text{O} \rightarrow 2\text{OH}$$Most O(¹D) atoms are simply quenched to ground-state O by N₂ and O₂ (and then re-form O₃); only the fraction that hits a water molecule makes OH. OH concentrations are tiny (of the order of 10⁶ molecules cm⁻³ as a global daytime mean) but OH reacts with almost everything containing a C–H bond or a double bond.
| Reaction | Significance |
|---|---|
| \( \text{CO} + \text{OH} \rightarrow \text{CO}_2 + \text{H} \); \( \text{H} + \text{O}_2 + \text{M} \rightarrow \text{HO}_2 + \text{M} \) | main sink of CO; makes HO₂ |
| \( \text{CH}_4 + \text{OH} \rightarrow \text{CH}_3 + \text{H}_2\text{O} \) | main sink of methane (lifetime about a decade) |
| \( \text{NO}_2 + \text{OH} + \text{M} \rightarrow \text{HNO}_3 + \text{M} \) | main daytime sink of NOₓ; source of nitric acid |
| \( \text{SO}_2 + \text{OH} + \text{M} \rightarrow \text{HOSO}_2 + \text{M} \) | gas-phase route to sulfuric acid |
| \( \text{HO}_2 + \text{NO} \rightarrow \text{OH} + \text{NO}_2 \) | recycles OH and converts NO to NO₂ without using O₃ |
Compounds with no C–H bond and no double bond (CFCs, N₂O, SF₆) are not attacked by OH and live for decades or more. Introducing a C–H bond (HCFCs, HFCs) is exactly what gives them a tropospheric sink.
Methane oxidation in outline
$$\text{CH}_4 \xrightarrow{\text{OH}} \text{CH}_3 \xrightarrow{\text{O}_2} \text{CH}_3\text{O}_2 \xrightarrow{\text{NO}} \text{CH}_3\text{O} \xrightarrow{\text{O}_2} \text{HCHO} \xrightarrow{\text{OH or } h\nu} \text{CO} \xrightarrow{\text{OH}} \text{CO}_2$$Each peroxy step (CH₃O₂ + NO, HO₂ + NO) turns an NO into NO₂, and each NO₂ photolysed gives an O atom that makes O₃. In NOₓ-rich air, oxidation of methane and other VOCs is a net source of ozone.
3. The NOₓ Photostationary State
Without VOCs, NO, NO₂ and O₃ form a closed null cycle:
$$\text{NO}_2 + h\nu\ (\lambda < \text{about } 420 \text{ nm}) \rightarrow \text{NO} + \text{O} \qquad (j)$$$$\text{O} + \text{O}_2 + \text{M} \rightarrow \text{O}_3 + \text{M}$$$$\text{NO} + \text{O}_3 \rightarrow \text{NO}_2 + \text{O}_2 \qquad (k)$$Setting the rate of NO₂ photolysis equal to its rate of formation gives the photostationary-state (Leighton) relation:
$$\boxed{[\text{O}_3] = \frac{j[\text{NO}_2]}{k[\text{NO}]}}$$Ozone depends on the ratio [NO₂]/[NO], not on the total NOₓ. Emitting NO alone cannot build ozone: NO titrates O₃ to NO₂, and photolysis just regenerates it.
What VOCs change. Peroxy radicals (HO₂, RO₂) from VOC oxidation convert NO to NO₂ without consuming ozone:
$$\text{RO}_2 + \text{NO} \rightarrow \text{RO} + \text{NO}_2 \qquad \text{HO}_2 + \text{NO} \rightarrow \text{OH} + \text{NO}_2$$The ratio [NO₂]/[NO] rises, and by the Leighton relation so does [O₃]. That is the chemical heart of photochemical smog: NOₓ + VOC + sunlight → O₃.
NOₓ-limited and VOC-limited air
Ozone production responds non-linearly to its precursors. In a city centre with high NOₓ, extra NO₂ removes OH (as HNO₃) and fresh NO titrates O₃: ozone is VOC-limited, and cutting NOₓ alone can briefly raise ozone. Downwind and in rural air with abundant natural VOCs, ozone is NOₓ-limited, and cutting NOₓ works. Control strategy depends on which regime applies; Part C questions use this to test whether you avoid assuming linearity.
4. Photochemical Smog
Conditions: strong sunlight, warm temperatures, stagnant air (often under a temperature inversion), and abundant NOₓ and VOCs from traffic.
Products: O₃ (the main oxidant), NO₂ (brown haze), aldehydes (HCHO, CH₃CHO), peroxyacetyl nitrate (PAN), HNO₃, and secondary organic aerosol.
PAN
$$\text{CH}_3\text{CHO} + \text{OH} \rightarrow \text{CH}_3\dot{\text{C}}\text{O} + \text{H}_2\text{O}$$$$\text{CH}_3\dot{\text{C}}\text{O} + \text{O}_2 \rightarrow \text{CH}_3\text{C(O)OO}^{\bullet}$$$$\text{CH}_3\text{C(O)OO}^{\bullet} + \text{NO}_2 \rightleftharpoons \text{CH}_3\text{C(O)OONO}_2 \text{ (PAN)}$$PAN is a strong eye irritant and phytotoxin. Its formation is reversible and thermally sensitive: in cold air PAN is stable and can travel far; when it descends into warmer air it decomposes and releases NO₂. PAN is thus a reservoir and long-range carrier of NOₓ.
The diurnal profile
graph LR
A[Early morning traffic:
NO and VOCs peak] --> B[Mid-morning:
NO converted to NO2,
NO2 peaks]
B --> C[Early afternoon:
strong sun, O3, aldehydes
and PAN peak]
C --> D[Evening:
sun fades, fresh NO
titrates O3]The order NO → NO₂ → O₃ in time, each peak a few hours after the last, is a favourite data-interpretation question.
Temperature inversion
Normally temperature falls with height and warm surface air rises, diluting pollutants. Under an inversion a warm layer sits above cooler surface air; the surface air cannot rise through it, so pollutants accumulate in a shallow layer. Radiation inversions (clear, calm nights, common in north Indian winters) and subsidence inversions (sinking air under high pressure) both trap smog.
Two smogs compared
| Feature | Photochemical (Los Angeles type) | Sulfurous / classical (London type) |
|---|---|---|
| Chemical character | oxidising | reducing (SO₂ is a reducing agent) |
| Primary pollutants | NOₓ, VOCs | SO₂, smoke (soot), particulates |
| Key products | O₃, PAN, aldehydes, NO₂ | H₂SO₄ droplets, sulfate, soot |
| Weather | warm, sunny, dry; low humidity | cold, damp, foggy |
| Time of peak | midday to afternoon | early morning (fog), winter |
| Main source | motor vehicles | coal burning |
| Effects | eye irritation, crop damage, rubber cracking, lung irritation | bronchitis, lung damage, high mortality in episodes |
5. Acid Rain
Why clean rain is already acidic
Rain in equilibrium with atmospheric CO₂ is a dilute carbonic acid solution:
$$\text{CO}_2(g) \rightleftharpoons \text{CO}_2(aq) \quad [\text{CO}_2(aq)] = K_H\,p_{\text{CO}_2}$$$$\text{CO}_2(aq) + \text{H}_2\text{O} \rightleftharpoons \text{H}^+ + \text{HCO}_3^- \quad K_{a1}$$Ignoring the second dissociation and water’s own ions, \( [\text{H}^+] = [\text{HCO}_3^-] \):
$$[\text{H}^+] = \sqrt{K_H K_{a1}\, p_{\text{CO}_2}}$$With \( K_H = 3.4 \times 10^{-2} \) mol L⁻¹ atm⁻¹, \( K_{a1} = 4.45 \times 10^{-7} \) and \( p_{\text{CO}_2} = 4.2 \times 10^{-4} \) atm, \( [\text{H}^+] = 2.5 \times 10^{-6} \) M and pH = 5.6. Rain is called acid rain when its pH is below about 5.6, the value set by CO₂ alone.
Note the square root: increasing CO₂ from 280 to 420 ppm lowers clean-rain pH only from 5.69 to 5.60.
Where the strong acids come from
Sulfuric acid. SO₂ is oxidised in two ways:
- Gas phase: \( \text{SO}_2 + \text{OH} + \text{M} \rightarrow \text{HOSO}_2 \); \( \text{HOSO}_2 + \text{O}_2 \rightarrow \text{SO}_3 + \text{HO}_2 \); \( \text{SO}_3 + \text{H}_2\text{O} \rightarrow \text{H}_2\text{SO}_4 \).
- Aqueous phase, in cloud droplets: dissolved S(IV) (mostly HSO₃⁻) is oxidised by H₂O₂ (fast even in acidic droplets, and usually dominant) and by O₃ (fast only at higher pH, so it slows itself down as the droplet acidifies). Fe and Mn ions catalyse oxidation by O₂.
Nitric acid. \( \text{NO}_2 + \text{OH} + \text{M} \rightarrow \text{HNO}_3 \) by day; at night \( \text{NO}_2 + \text{O}_3 \rightarrow \text{NO}_3 + \text{O}_2 \), \( \text{NO}_3 + \text{NO}_2 \rightleftharpoons \text{N}_2\text{O}_5 \), and N₂O₅ hydrolyses on wet particles to 2HNO₃.
Effects
| Target | Chemistry |
|---|---|
| Marble and limestone buildings | \( \text{CaCO}_3 + \text{H}_2\text{SO}_4 \rightarrow \text{CaSO}_4 + \text{H}_2\text{O} + \text{CO}_2 \); gypsum is more soluble and flakes off (“stone leprosy”) |
| Lakes | lower pH kills fish and invertebrates; poorly buffered lakes on granite are most vulnerable, while lakes on limestone are buffered by carbonate |
| Soils | leaching of Ca²⁺, Mg²⁺, K⁺; mobilisation of toxic Al³⁺ from aluminosilicates |
| Metals | corrosion of iron, steel and bronze |
| Forests | foliage damage, nutrient loss |
Wet deposition (in rain, snow, fog) and dry deposition (gases and particles settling directly) both deliver acid.
Control
- Low-sulfur fuels; coal washing.
- Flue-gas desulfurisation (FGD) with limestone or lime slurry: $$\text{CaCO}_3 + \text{SO}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{CaSO}_4 + \text{CO}_2$$ The product, hydrated as CaSO₄·2H₂O (gypsum), can be sold.
- Fluidised-bed combustion with limestone in the bed.
- NOₓ control: lower flame temperatures, staged combustion, and selective catalytic reduction (SCR) with ammonia over V₂O₅/TiO₂: $$4\text{NO} + 4\text{NH}_3 + \text{O}_2 \rightarrow 4\text{N}_2 + 6\text{H}_2\text{O}$$
- Liming of acidified lakes treats the symptom.
6. Vehicle Exhaust and the Three-Way Catalytic Converter
A petrol engine emits CO, unburnt hydrocarbons (HC) and NOₓ. A three-way converter (Pt and Pd for oxidation, Rh mainly for NOₓ reduction, on a ceramic honeycomb coated with a high-area oxide washcoat containing CeO₂ as an oxygen store) removes all three at once:
| Reaction | Type |
|---|---|
| \( 2\text{CO} + \text{O}_2 \rightarrow 2\text{CO}_2 \) | oxidation |
| \( \text{C}_x\text{H}_y + (x + y/4)\text{O}_2 \rightarrow x\text{CO}_2 + (y/2)\text{H}_2\text{O} \) | oxidation |
| \( 2\text{NO} + 2\text{CO} \rightarrow \text{N}_2 + 2\text{CO}_2 \) | reduction (CO and HC are the reductants) |
All three work together only in a narrow window of air-to-fuel ratio near stoichiometric: with excess air, NOₓ is not reduced; with excess fuel, CO and HC are not oxidised. An oxygen sensor in the exhaust feeds back to the fuel injection to hold the mixture in that window. Lead poisons the precious-metal surface, which is why leaded petrol and catalytic converters cannot coexist. Diesel engines run lean (excess air), so a three-way converter cannot reduce their NOₓ; they use SCR with urea (which hydrolyses to NH₃) plus particulate filters.
7. Particulate Matter
Particles are classified by aerodynamic diameter: PM₁₀ (≤ 10 μm, inhalable) and PM₂.₅ (≤ 2.5 μm, “fine”, reach the alveoli). Fine particles are mostly secondary (sulfate, nitrate, ammonium, organic aerosol) and from combustion (soot); coarse particles are mostly mechanical (dust, sea salt).
Settling velocity in still air follows Stokes’ law:
$$v = \frac{(\rho_p - \rho_{air})\, g\, d^2}{18\,\eta}$$Because v ∝ d², a 1 μm particle (density 2000 kg m⁻³, air viscosity \( 1.8 \times 10^{-5} \) Pa s) settles at about \( 6 \times 10^{-5} \) m s⁻¹, a hundred times slower than a 10 μm particle; fine particles stay airborne for days and are removed mainly by rain.
| Control device | Principle | Best for |
|---|---|---|
| Settling chamber, cyclone | gravity, centrifugal force | coarse particles |
| Fabric (bag) filter | filtration | fine particles, high efficiency |
| Electrostatic precipitator (ESP) | corona charging, collection on plates | fly ash in power plants |
| Wet scrubber | capture in liquid droplets | particles and soluble gases (SO₂) together |
8. The Greenhouse Effect
Radiation balance
The Earth absorbs sunlight and re-emits infrared. With solar constant S = 1361 W m⁻², planetary albedo A = 0.30 and Stefan–Boltzmann constant σ = 5.67 × 10⁻⁸ W m⁻² K⁻⁴, balancing absorbed and emitted power (the factor 4 is the ratio of sphere surface to the disc that intercepts sunlight):
$$\frac{S(1 - A)}{4} = \sigma T_e^4 \quad\Rightarrow\quad T_e = \left[\frac{S(1-A)}{4\sigma}\right]^{1/4} \approx 255 \text{ K}$$The observed mean surface temperature is about 288 K. The difference, about 33 K, is the natural greenhouse effect: IR-absorbing gases absorb the surface’s outgoing radiation and re-emit part of it downward, so the surface must be warmer to radiate the same net energy to space.
Wien’s law (\( \lambda_{max} T = 2898 \) μm K) places the Sun’s emission (about 5800 K) near 0.5 μm (visible) and the Earth’s (288 K) near 10 μm (infrared). The atmosphere is largely transparent to the first and partly opaque to the second.
Which gases absorb infrared?
A vibration absorbs IR only if it changes the dipole moment. Homonuclear diatomics (N₂, O₂) and monatomic Ar have no IR-active vibration, so 99% of the atmosphere is transparent to thermal IR.
| Gas | IR-active modes that matter | Comment |
|---|---|---|
| H₂O | bending near 6.3 μm, rotational band beyond about 20 μm | largest contributor to the natural effect; acts as a feedback (warmer air holds more water) rather than an independent forcing |
| CO₂ | bending, 667 cm⁻¹ (15 μm); asymmetric stretch, 2349 cm⁻¹ (4.3 μm) | symmetric stretch (Raman active) is IR inactive; the 15 μm band sits near the peak of Earth’s emission |
| CH₄ | several bands; strong near 7.7 μm | much stronger per molecule than CO₂ |
| N₂O | several bands | long-lived |
| O₃ | 9.6 μm band, in the atmospheric window | also a tropospheric pollutant |
| CFCs, HFCs, SF₆ | C–F and C–Cl stretches in the 8–13 μm atmospheric window | very strong per molecule because the window is otherwise clear |
The atmospheric window (roughly 8–13 μm) is a region where water vapour and CO₂ absorb weakly, so surface radiation escapes to space. Gases that absorb inside the window (CFCs, HFCs, SF₆) are disproportionately potent.
Comparing greenhouse gases
The global warming potential (GWP) of a gas is the time-integrated radiative forcing from a pulse emission of 1 kg of the gas, relative to 1 kg of CO₂, usually over 100 years. It depends on how strongly the gas absorbs per molecule (especially in the window) and how long it survives. By definition GWP(CO₂) = 1; methane is of the order of 30, N₂O of the order of 300, and SF₆ and many CFCs and HFCs in the thousands or more (exact values vary between assessment reports). Emissions are summed as CO₂-equivalents: mass × GWP.
Radiative forcing
Radiative forcing ΔF (W m⁻²) is the change in net energy flux at the top of the troposphere caused by a perturbation. For CO₂ a widely used simplified expression is logarithmic:
$$\Delta F = 5.35 \ln\frac{C}{C_0}\ \text{W m}^{-2}$$The logarithm arises because the centre of the 15 μm band is already saturated; extra CO₂ absorbs mainly in the band wings. Doubling CO₂ gives \( 5.35 \ln 2 = 3.7 \) W m⁻². Equilibrium warming is estimated as \( \Delta T = \lambda\, \Delta F \) with a climate sensitivity parameter λ (often taken near 0.8 K per W m⁻² in textbook problems).
Aerosols mostly cool: sulfate particles scatter sunlight back to space (direct effect) and act as cloud condensation nuclei, making clouds brighter (indirect effect). Black carbon (soot) absorbs sunlight and warms.
9. Indoor Air Pollution
| Pollutant | Source | Note |
|---|---|---|
| CO | unvented stoves, heaters, smouldering fires | silent poison in closed rooms |
| Particulates, PAHs | solid-fuel cooking (wood, dung, coal) | major health burden in rural households |
| HCHO (formaldehyde) | particle board, urea–formaldehyde resins | irritant; carcinogen |
| Radon-222 | α-emitting noble gas from the ²³⁸U decay series in soil and rock | its short-lived daughters deposit in the lung; a leading cause of lung cancer in non-smokers |
| NO₂ | gas cooking | respiratory irritant |
Industrial accidents belong here too: the December 1984 Bhopal disaster released methyl isocyanate (CH₃N=C=O), an intermediate in the manufacture of the carbamate insecticide carbaryl, from a storage tank after water entered it and an exothermic reaction followed.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Primary pollutant (emitted: NO, CO, SO₂) | secondary pollutant (formed: O₃, PAN, H₂SO₄) | |
| Photochemical smog: oxidising, sunny, NOₓ + VOC | London smog: reducing, foggy, SO₂ + soot | |
| Leighton relation: [O₃] depends on NO₂/NO ratio | total NOₓ: does not by itself set O₃ | |
| H₂O₂ oxidation of S(IV): fast at low pH | O₃ oxidation of S(IV): fast only at higher pH | |
| Wet deposition | dry deposition | |
| PM₁₀: inhalable, includes coarse dust | PM₂.₅: fine, reaches alveoli, mostly secondary/combustion | |
| GWP: per kg, relative to CO₂, integrated over a horizon | radiative forcing: W m⁻² now | |
| Water vapour: feedback | CO₂, CH₄, N₂O: forcings | |
| Three-way converter (petrol, near stoichiometric) | SCR with urea/NH₃ (diesel, lean) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Name two secondary pollutants of photochemical smog.
- Why is CO₂’s symmetric stretch not involved in the greenhouse effect?
- What reagent is used in flue-gas desulfurisation?
Answers
- Any two of O₃, PAN, aldehydes formed in the air, HNO₃, NO₂ (mostly secondary).
- It does not change the dipole moment, so it is IR inactive (it is Raman active).
- Limestone (CaCO₃) or lime slurry, giving CaSO₄ (gypsum).
Level 2: Part B Style
Practice Q1. In unpolluted air at a fixed temperature, the photostationary concentration of ozone depends on:
(a) the total NOₓ concentration only (b) the ratio [NO₂]/[NO] and the photolysis rate of NO₂ (c) the methane concentration only (d) the SO₂ concentration
Answer: (b)
\( [\text{O}_3] = j[\text{NO}_2]/(k[\text{NO}]) \). Total NOₓ does not appear; only the ratio and j (sunlight) do. Methane matters only by supplying peroxy radicals that shift the ratio.
Practice Q2. A city reports 0.053 ppm NO₂ at 25 °C and 1 atm (NO₂: M = 46.01). The mass concentration is closest to:
(a) 53 μg m⁻³ (b) 100 μg m⁻³ (c) 109 μg m⁻³ (d) 2.4 mg m⁻³
Answer: (b)
\( 0.053 \times 46.01 \times 1000/24.45 = 99.7 \) μg m⁻³. Using 22.41 L mol⁻¹ (0 °C) gives 109 μg m⁻³, option (c), the molar-volume trap.
Practice Q3. Which statement about peroxyacetyl nitrate is incorrect?
(a) It forms from the acetylperoxy radical and NO₂. (b) It is a strong eye irritant. (c) It is a primary pollutant emitted in vehicle exhaust. (d) It can transport NOₓ over long distances in cold air.
Answer: (c)
PAN is secondary: it forms in the air from aldehyde oxidation products and NO₂. (a), (b) and (d) are correct; PAN’s thermal instability makes it a long-range NOₓ carrier that releases NO₂ in warmer air.
Practice Q4. A three-way catalytic converter fails to remove NOₓ efficiently when the engine runs with a large excess of air because:
(a) Rh is oxidised to Rh metal (b) there is too little CO and hydrocarbon left to act as reductant, and O₂ competes for them (c) NOₓ is converted to N₂O₅ (d) CeO₂ is reduced to Ce metal
Answer: (b)
NO is reduced by CO and HC on Rh. In lean exhaust the reductants are burnt by the excess O₂, so NO stays unreduced. (a) is self-contradictory (oxidation would not give the metal); (c) and (d) are not what happens.
Level 3: Part C Style
Practice Q5. Rainwater in equilibrium with 420 ppm CO₂ also contains 1.0 × 10⁻⁵ M H₂SO₄ (assume complete dissociation to 2H⁺ + SO₄²⁻). Use \( K_H = 3.4 \times 10^{-2} \) M atm⁻¹ and \( K_{a1} = 4.45 \times 10^{-7} \). Which statements are correct?
- Without H₂SO₄ the pH would be about 5.6.
- With H₂SO₄ the pH is about 4.7.
- The added acid increases the concentration of HCO₃⁻ in the drop.
- With H₂SO₄ present, carbonic acid contributes less than 2% of the H⁺.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
\( K_HK_{a1}p = 3.4 \times 10^{-2} \times 4.45 \times 10^{-7} \times 4.2 \times 10^{-4} = 6.35 \times 10^{-12} \) M².
- Without sulfate: [H⁺] = √(6.35 × 10⁻¹²) = 2.52 × 10⁻⁶ M, pH 5.60: 1 true.
- With sulfate, charge balance: [H⁺] = 2 × 10⁻⁵ + 6.35 × 10⁻¹²/[H⁺]. Solving the quadratic, [H⁺] = 2.03 × 10⁻⁵ M, pH 4.69: 2 true.
- [HCO₃⁻] = 6.35 × 10⁻¹²/[H⁺] falls from 2.5 × 10⁻⁶ to 3.1 × 10⁻⁷ M (Le Chatelier): 3 false.
- Carbonic acid’s share is 3.1 × 10⁻⁷/2.03 × 10⁻⁵ = 1.5% of the H⁺, below 2%: 4 true. The strong acid suppresses carbonic acid dissociation, so in polluted rain the pH is set almost entirely by H₂SO₄ and HNO₃.
Practice Q6. With S = 1361 W m⁻² and σ = 5.67 × 10⁻⁸ W m⁻² K⁻⁴, which statements are correct?
- For albedo 0.30 the effective radiating temperature of the Earth is about 255 K.
- Reducing the albedo to 0.25 raises the effective temperature by about 4 K.
- Raising CO₂ from 280 to 560 ppm gives a radiative forcing of about 3.7 W m⁻² by the logarithmic formula.
- With λ = 0.8 K per W m⁻², the forcing for 280 → 420 ppm gives an equilibrium warming of about 1.7 K.
(a) 1, 2, 3 and 4 (b) 1 and 3 only (c) 2 and 4 only (d) 1, 3 and 4 only
Answer: (a) 1, 2, 3 and 4
- \( T_e = [1361 \times 0.70/(4 \times 5.67 \times 10^{-8})]^{1/4} = 254.6 \) K: true.
- With A = 0.25: \( [1361 \times 0.75/(2.268 \times 10^{-7})]^{1/4} = 259.0 \) K, an increase of 4.4 K: true.
- \( 5.35 \ln 2 = 3.71 \) W m⁻²: true.
- \( 5.35 \ln(420/280) = 2.17 \) W m⁻²; × 0.8 = 1.74 K: true.
Practice Q7. A power station burns 1000 tonnes of coal per day containing 2.0% sulfur by mass. All S is emitted as SO₂ unless captured by limestone FGD forming CaSO₄. (S 32.06, SO₂ 64.07, CaCO₃ 100.09, CaSO₄·2H₂O 172.17.) Which statements are correct?
- Without FGD the plant emits about 40 tonnes of SO₂ per day.
- Complete capture needs about 62 tonnes of CaCO₃ per day.
- Complete capture produces about 107 tonnes of gypsum per day.
- FGD with limestone releases no CO₂.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
S = 20.0 t = 2.00 × 10⁷ g ÷ 32.06 g mol⁻¹ = 624 kmol.
- SO₂ = 20.0 × 64.07/32.06 = 40.0 t: true.
- CaCO₃ = 20.0 × 100.09/32.06 = 62.4 t: true.
- Gypsum = 20.0 × 172.17/32.06 = 107.4 t: true.
- \( \text{CaCO}_3 + \text{SO}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{CaSO}_4 + \text{CO}_2 \): one CO₂ per SO₂ captured (about 27 t day⁻¹): false.
Quick Revision Table
| Idea | Fact |
|---|---|
| ppm → μg m⁻³ | × M × 1000/24.45 (25 °C, 1 atm) |
| OH formation | O₃ + hν → O(¹D); O(¹D) + H₂O → 2OH |
| OH sinks | CO, CH₄, VOCs, NO₂ (→ HNO₃), SO₂ |
| Leighton | [O₃] = j[NO₂]/(k[NO]) |
| VOC role | RO₂/HO₂ + NO → NO₂ without using O₃ → more O₃ |
| PAN | CH₃C(O)OONO₂; secondary; NOₓ reservoir; eye irritant |
| Smog clock | NO → NO₂ → O₃ peaks in sequence |
| Smog types | photochemical oxidising, sunny; London reducing, foggy |
| Clean rain | pH 5.6 from CO₂; [H⁺] = √(K_H K_a1 p) |
| S(IV) oxidants | OH (gas); H₂O₂ (aqueous, low pH); O₃ (higher pH) |
| FGD | CaCO₃ + SO₂ + ½O₂ → CaSO₄ + CO₂ |
| SCR | 4NO + 4NH₃ + O₂ → 4N₂ + 6H₂O |
| Three-way converter | Pt/Pd oxidise CO, HC; Rh reduces NO; stoichiometric window; lead poisons |
| Stokes | v ∝ d²; PM₂.₅ stays aloft for days |
| Radiation balance | T_e ≈ 255 K; surface 288 K; greenhouse ≈ 33 K |
| IR activity | needs dipole change; N₂, O₂, Ar inactive |
| CO₂ bands | 15 μm bend, 4.3 μm asym stretch |
| Window | 8–13 μm; CFCs, HFCs, SF₆ absorb there |
| Forcing | ΔF = 5.35 ln(C/C₀); 2 × CO₂ = 3.7 W m⁻² |
Key Takeaways
What’s Next
- From air to water: Aquatic Chemistry and Water Quality.
- Back up a layer: The Atmosphere and Stratospheric Ozone.
- The ecological consequences of pollution and climate change: Ecosystem Ecology and Human Impacts.
- Chapter overview: Environmental Chemistry.