Groups 14 and 15: Silicates, Silicones, Nitrogen and Phosphorus Compounds
CSIR NET chemistry: carbides, silanes, silicate classes, silicones, Pb and Sn oxidation states, nitrogen hydrides and oxides, P oxides, oxoacids, phosphazenes.
- 18 min
On this page · 17 sections
- Prerequisites
- The Hook: Sand, Rubber and Rings
- Carbon Compounds Worth Knowing
- Silicon Compounds
- Silicates: Classification by Shared Corners
- Silicones
- Tin and Lead: The Inert Pair
- Nitrogen Compounds
- Phosphorus Compounds
- Phosphazenes
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Allotropy of Main Group Elements: why Si and P prefer σ-bonded networks while C and N form multiple bonds.
- s-Block and Group 13 Compounds: borazine, the B–N analogue of the P–N rings below.
- Bond Angles, Bent’s Rule and the Limits of VSEPR: the planar N(SiH₃)₃ and the wide Si–O–Si angle are classic VSEPR exceptions.
- Electronegativity and Periodic Anomalies: the inert pair effect for Sn and Pb.
The Hook: Sand, Rubber and Rings
Carbon Compounds Worth Knowing
Carbides
| Type | Examples | Hydrolysis product | Note |
|---|---|---|---|
| Saline (ionic) methanides | Be₂C, Al₄C₃ | CH₄ | contain C⁴⁻ formally |
| Saline acetylides | CaC₂, Na₂C₂ | C₂H₂ | contain \( \text{C}_2^{2-} \) (isoelectronic with N₂) |
| Allylides | Mg₂C₃ | propyne, CH₃C≡CH | contain \( \text{C}_3^{4-} \) |
| Covalent | SiC, B₄C | none (inert) | very hard, refractory |
| Interstitial (metallic) | TiC, WC, Fe₃C | (not saline) | C in holes of a metal lattice; hard, high melting, metallic conductors |
CaC₂ is made from lime and coke in an electric furnace (\( \text{CaO} + 3\text{C} \rightarrow \text{CaC}_2 + \text{CO} \)); it reacts with N₂ at high temperature to give calcium cyanamide, CaNCN, a nitrogen fertiliser.
Oxides of carbon
- CO: isoelectronic with N₂ (bond order 3), a weak σ donor and good π acceptor (the basis of metal carbonyl chemistry). Made industrially with H₂ as synthesis gas.
- CO₂: linear, \( D_{\infty h} \), no dipole moment; the solid is molecular (dry ice).
- Carbon suboxide C₃O₂: linear O=C=C=C=O, the anhydride of malonic acid.
Silicon Compounds
Silanes and halides
Silanes \( \text{Si}_n\text{H}_{2n+2} \) are far less stable than alkanes: they ignite in air, and they hydrolyse in base. Si–Si bonds are weaker than C–C, and Si–H is polarised \( \text{Si}^{\delta+}\text{–H}^{\delta-} \) (Si is less electronegative than H), which makes the hydrogen hydridic.
$$\text{SiCl}_4 + \text{LiAlH}_4 \rightarrow \text{SiH}_4 + \text{LiCl} + \text{AlCl}_3 \qquad \text{Mg}_2\text{Si} + \text{HCl(aq)} \rightarrow \text{mixture of silanes}$$Hydrolysis of SiCl₄ versus CCl₄: SiCl₄ fumes in moist air and is hydrolysed at once to silica and HCl; CCl₄ is inert to water. Both reactions are thermodynamically favourable. The difference is kinetic: silicon is larger and can accept a nucleophile (a five-coordinate intermediate or transition state), whereas carbon is too small and its bonds too crowded. Older texts attribute this to vacant 3d orbitals on Si; the modern view puts the weight on size and on the low-lying Si–Cl σ* orbitals.
Trisilylamine and disiloxane
| N(CH₃)₃ | N(SiH₃)₃ | |
|---|---|---|
| Shape at N | pyramidal | planar (Si₃N) |
| Basicity | Lewis base | very weak base |
Similarly, the Si–O–Si angle in disiloxane (H₃Si)₂O is about 144°, far wider than the C–O–C angle in dimethyl ether (about 111°). Both effects show the nitrogen or oxygen lone pair is delocalised towards silicon. The traditional explanation is \( p\pi\text{–}d\pi \) bonding into empty Si 3d orbitals; the explanation now preferred is negative hyperconjugation, donation from the lone pair into Si–H (or Si–C) σ* orbitals, together with the larger size of silicon. Either way, the result to remember is: lone pair delocalised, geometry flattened, basicity reduced.
Silica
SiO₂ is a 3D network of corner-sharing SiO₄ tetrahedra. Its polymorphs (quartz, tridymite, cristobalite, and high-pressure forms) differ in how the tetrahedra are linked. Silica is attacked by HF (\( \text{SiO}_2 + 4\text{HF} \rightarrow \text{SiF}_4 + 2\text{H}_2\text{O} \), and with excess HF \( \text{H}_2\text{SiF}_6 \)) and by fused alkali (giving silicates).
Silicates: Classification by Shared Corners
All silicates are built from SiO₄ tetrahedra. What distinguishes the classes is the number of oxygen atoms each tetrahedron shares with its neighbours.
graph LR
A[0 shared: SiO4 4-
ortho] --> B[1 shared: Si2O7 6-
pyro]
B --> C[2 shared: SiO3 n
rings and single chains]
C --> D[2.5 shared: Si4O11 6-
double chains]
D --> E[3 shared: Si2O5 2-
sheets]
E --> F[4 shared: SiO2
3D frameworks]If each tetrahedron shares \( s \) corners, each shared O counts as half to each silicon, so
$$\boxed{\text{formula per Si} = \text{SiO}_{4 - s/2}, \qquad \text{charge per Si} = -(4 - s)}$$| Class | Shared O per SiO₄ | Repeat unit | O : Si | Examples |
|---|---|---|---|---|
| Orthosilicates (nesosilicates) | 0 | \( \text{SiO}_4^{4-} \) | 4 | olivine (Mg,Fe)₂SiO₄, zircon ZrSiO₄, willemite Zn₂SiO₄, phenacite Be₂SiO₄ |
| Pyrosilicates (sorosilicates) | 1 | \( \text{Si}_2\text{O}_7^{6-} \) | 3.5 | thortveitite Sc₂Si₂O₇ |
| Cyclic silicates | 2 | \( (\text{SiO}_3)_n^{2n-} \) | 3 | benitoite BaTi(Si₃O₉), beryl Be₃Al₂(Si₆O₁₈) |
| Single chains (pyroxenes) | 2 | \( (\text{SiO}_3)_n^{2n-} \) | 3 | enstatite MgSiO₃, diopside CaMg(SiO₃)₂, spodumene LiAl(SiO₃)₂ |
| Double chains (amphiboles) | 2 and 3 alternately (average 2.5) | \( (\text{Si}_4\text{O}_{11})_n^{6n-} \) | 2.75 | tremolite Ca₂Mg₅(Si₄O₁₁)₂(OH)₂; amphibole asbestos |
| Sheets (phyllosilicates) | 3 | \( (\text{Si}_2\text{O}_5)_n^{2n-} \) | 2.5 | talc Mg₃(Si₂O₅)₂(OH)₂, kaolinite Al₂(OH)₄Si₂O₅, micas |
| 3D frameworks (tectosilicates) | 4 | SiO₂ (neutral) | 2 | quartz; with Al for Si: feldspars (KAlSi₃O₈), zeolites, ultramarines |
Rings and single chains share the same \( \text{SiO}_3^{2-} \) stoichiometry: you can tell them apart only from the structure (or a ring-size subscript such as Si₃O₉ or Si₆O₁₈). Sheet silicates cleave into thin layers (mica, talc); chain silicates are fibrous (asbestos).
Silicones
Silicones are polymers with an –Si–O–Si–O– backbone and organic groups on silicon: \( (\text{R}_2\text{SiO})_n \).
Step 1, the direct (Rochow or Müller–Rochow) process:
$$2\text{CH}_3\text{Cl} + \text{Si} \xrightarrow{\text{Cu catalyst, about 300 °C}} (\text{CH}_3)_2\text{SiCl}_2$$with CH₃SiCl₃ and (CH₃)₃SiCl as by-products, separated by fractional distillation.
Step 2, hydrolysis and condensation:
$$(\text{CH}_3)_2\text{SiCl}_2 + 2\text{H}_2\text{O} \rightarrow (\text{CH}_3)_2\text{Si(OH)}_2 + 2\text{HCl}$$$$n\,(\text{CH}_3)_2\text{Si(OH)}_2 \rightarrow [(\text{CH}_3)_2\text{SiO}]_n + n\,\text{H}_2\text{O}$$| Precursor | Number of OH after hydrolysis | Role in the polymer |
|---|---|---|
| R₃SiCl | 1 | chain terminator (end-capping); controls chain length |
| R₂SiCl₂ | 2 | chain builder: linear chains and cyclic oligomers |
| RSiCl₃ | 3 | cross-linker: 3D resins |
So oils and greases use R₂SiCl₂ with a little R₃SiCl; elastomers lightly cross-link the chains; resins use more RSiCl₃. Silicones are water-repellent, thermally and oxidatively stable, electrically insulating, chemically inert and stay flexible at low temperature (the Si–O–Si backbone is very flexible).
Tin and Lead: The Inert Pair
| Property | Sn | Pb |
|---|---|---|
| More stable state | +4 | +2 |
| Reducing / oxidising | SnCl₂ is a common reducing agent | PbO₂ is a strong oxidising agent |
| Halides | SnCl₄ covalent liquid | PbCl₄ unstable (loses Cl₂ on warming); PbI₄ not known |
Red lead, Pb₃O₄, is a mixed-valence oxide, best written 2PbO·PbO₂ or Pb₂[PbO₄]: two Pb(II) for every Pb(IV). With dilute HNO₃ it gives PbO₂ (insoluble) and Pb(NO₃)₂, which separates the two oxidation states:
$$\text{Pb}_3\text{O}_4 + 4\text{HNO}_3 \rightarrow 2\text{Pb(NO}_3)_2 + \text{PbO}_2 + 2\text{H}_2\text{O}$$Nitrogen Compounds
Hydrides
| Compound | Structure | Preparation (key route) | Behaviour |
|---|---|---|---|
| NH₃ | pyramidal, H–N–H about 107° | Haber–Bosch (see industrial page) | base, ligand, solvent |
| N₂H₄ (hydrazine) | two NH₂ groups, gauche | Raschig process | base (weaker than NH₃), strong reducing agent, rocket fuel |
| NH₂OH | reduction of nitrite or nitric oxide | weak base, reducing agent | |
| HN₃ (hydrazoic acid) | H–N–N–N, the N₃ unit nearly linear | from NaN₃ + acid | weak acid, explosive |
Raschig process:
$$\text{NH}_3 + \text{NaOCl} \rightarrow \text{NH}_2\text{Cl} + \text{NaOH} \qquad \text{NH}_2\text{Cl} + \text{NH}_3 + \text{NaOH} \rightarrow \text{N}_2\text{H}_4 + \text{NaCl} + \text{H}_2\text{O}$$A side reaction destroys the product, \( \text{N}_2\text{H}_4 + 2\text{NH}_2\text{Cl} \rightarrow \text{N}_2 + 2\text{NH}_4\text{Cl} \), and is catalysed by traces of metal ions; gelatin or glue is added to sequester them, and a large excess of NH₃ is used.
Sodium azide: \( 2\text{NaNH}_2 + \text{N}_2\text{O} \rightarrow \text{NaN}_3 + \text{NaOH} + \text{NH}_3 \). The azide ion \( \text{N}_3^- \) is linear and symmetric (16 valence electrons, isoelectronic with CO₂), and is a pseudohalide.
Nitrogen trihalides
NF₃ is stable, non-explosive and almost non-basic; its dipole moment (about 0.23 D) is much smaller than that of NH₃ (about 1.47 D) because the N–F bond dipoles point away from nitrogen and oppose the lone-pair contribution, while in NH₃ they reinforce it. NCl₃ is an explosive oil; NBr₃ and NI₃ (as its ammonia adduct) are explosive too.
Oxides of nitrogen
| Oxide | N oxidation state | Structure | Notes |
|---|---|---|---|
| N₂O | +1 | linear N–N–O (16 valence electrons, like CO₂) | from heating NH₄NO₃; anaesthetic |
| NO | +2 | diatomic, 11 valence electrons, bond order 2.5 | paramagnetic; NO⁺ (bond order 3) is isoelectronic with CO and N₂ |
| N₂O₃ | +3 | O=N–NO₂, long N–N bond | blue solid/liquid; anhydride of HNO₂ |
| NO₂ | +4 | bent, about 134°, one unpaired electron | brown, paramagnetic; dimerises |
| N₂O₄ | +4 | planar O₂N–NO₂, long, weak N–N bond | colourless, diamagnetic; \( 2\text{NO}_2 \rightleftharpoons \text{N}_2\text{O}_4 \) |
| N₂O₅ | +5 | molecular in the gas; solid is [NO₂]⁺[NO₃]⁻ | anhydride of HNO₃ |
Oxoacids of nitrogen
HNO₂ (nitrous acid) is weak and unstable, disproportionating to HNO₃ and NO. HNO₃ is planar about N; in the nitrate ion all three N–O bonds are equal (\( D_{3h} \)). HNO₃ manufacture by the Ostwald process is on the industrial page.
Phosphorus Compounds
Oxides
Phosphorus burns in limited air to P₄O₆ and in excess air to P₄O₁₀ (often written P₂O₅).
- P₄O₆: start from the P₄ tetrahedron and insert one O into each of the six P–P edges: six bridging P–O–P. Each P is P(III) with a lone pair.
- P₄O₁₀: P₄O₆ plus one terminal P=O on each P: 6 bridging + 4 terminal oxygens, each P tetrahedral P(V). The terminal P–O bonds are shorter than the bridging ones.
Hydrolysis: \( \text{P}_4\text{O}_6 + 6\text{H}_2\text{O} \rightarrow 4\text{H}_3\text{PO}_3 \); \( \text{P}_4\text{O}_{10} + 6\text{H}_2\text{O} \rightarrow 4\text{H}_3\text{PO}_4 \). P₄O₁₀ is one of the most powerful dehydrating agents (it converts HNO₃ to N₂O₅ and amides to nitriles).
Oxoacids: basicity = number of P–OH
The key structural fact: H bonded directly to P is not acidic. Only P–OH hydrogens ionise.
| Acid | Formula | Ox. state of P | P–H bonds | Basicity | Character |
|---|---|---|---|---|---|
| Hypophosphorous (phosphinic) | H₃PO₂ | +1 | 2 | 1 | strong reducing agent |
| Phosphorous (phosphonic) | H₃PO₃ | +3 | 1 | 2 | reducing agent; disproportionates on heating |
| Orthophosphoric | H₃PO₄ | +5 | 0 | 3 | not oxidising |
| Hypophosphoric | H₄P₂O₆ | +4 | 0 (has a P–P bond) | 4 | |
| Pyrophosphoric (diphosphoric) | H₄P₂O₇ | +5 | 0 (P–O–P bridge) | 4 | from heating H₃PO₄ |
| Metaphosphoric | (HPO₃)ₙ | +5 | 0 | 1 per P | cyclic or chain polymers |
Reactions to recognise:
$$\text{P}_4 + 3\text{NaOH} + 3\text{H}_2\text{O} \rightarrow \text{PH}_3 + 3\text{NaH}_2\text{PO}_2$$$$4\text{H}_3\text{PO}_3 \xrightarrow{\text{heat}} 3\text{H}_3\text{PO}_4 + \text{PH}_3$$The first is a disproportionation of P(0) to P(−3) and P(+1); the second of P(+3) to P(+5) and P(−3). Both H₃PO₂ and H₃PO₃ are reducing agents (they reduce Ag⁺ to silver, for example); hypophosphite is the stronger, and sodium hypophosphite is the reductant in electroless nickel plating.
Halides
- PCl₃: pyramidal; hydrolyses to H₃PO₃ + 3HCl.
- PCl₅: trigonal bipyramid in the gas (axial bonds longer than equatorial); the solid is ionic, [PCl₄]⁺[PCl₆]⁻ (tetrahedral cation, octahedral anion).
- PBr₅: solid is [PBr₄]⁺Br⁻ (Br⁻ is too large for six bromines to fit around P in an anion).
- PF₅: a trigonal bipyramid that is fluxional (Berry pseudorotation exchanges axial and equatorial F on the NMR time scale, so ¹⁹F NMR shows one environment at room temperature).
- P₄S₃: the phosphorus sulfide in strike-anywhere match heads.
Phosphazenes
Synthesis and structure
$$n\,\text{PCl}_5 + n\,\text{NH}_4\text{Cl} \xrightarrow{\text{C}_2\text{H}_2\text{Cl}_4\ \text{or}\ \text{C}_6\text{H}_5\text{Cl, reflux}} (\text{NPCl}_2)_n + 4n\,\text{HCl}$$The main products are the cyclic trimer (NPCl₂)₃ and tetramer (NPCl₂)₄.
- Trimer: a planar six-membered P₃N₃ ring; all P–N bonds equal (about 158 pm), shorter than a P–N single bond.
- Tetramer: an eight-membered ring, puckered.
- Each P is tetrahedral, carrying two Cl outside the ring.
Bonding: although the trimer looks like benzene and borazine, its π bonding is not benzene-like aromatic. Older descriptions used \( d\pi\text{–}p\pi \) overlap (Dewar’s “island” model, with three-centre P–N–P π islands broken at each phosphorus). The current view is a largely ionic \( \text{P}^+\text{–N}^- \) σ framework with negative hyperconjugation from nitrogen lone pairs into P–Cl σ* orbitals. Either way, the delocalisation does not extend round the ring, and the large tetramer ring can pucker without losing it.
Substitution and polymers
- The P–Cl bonds are readily substituted by nucleophiles (alkoxide, aryloxide, amines, organometallics): \( (\text{NPCl}_2)_3 + 6\text{NaOR} \rightarrow [\text{NP(OR)}_2]_3 + 6\text{NaCl} \). Substitution patterns are geminal (both on one P) or non-geminal, and non-geminal products have cis/trans isomers.
- Heating the trimer at about 250 °C causes ring-opening polymerisation to linear (NPCl₂)ₙ, the elastic “inorganic rubber”. It is hydrolytically unstable, but replacing the Cl atoms with OR or NR₂ groups gives stable polyphosphazenes with very flexible backbones, used as elastomers, flame-retardants and biomedical materials.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Cyclic \( \text{Si}_3\text{O}_9^{6-} \) and chain \( (\text{SiO}_3)_n^{2n-} \): same SiO₃²⁻ ratio | double chain \( \text{Si}_4\text{O}_{11}^{6-} \): SiO\(_{2.75}\) | |
| N(CH₃)₃ pyramidal, basic | N(SiH₃)₃ planar, weakly basic | |
| Phosphazene (NPCl₂)₃: planar ring, not aromatic | borazine: planar, polar, weakly aromatic; benzene: aromatic | |
| P₄O₆: 6 bridging O, P(III) | P₄O₁₀: 6 bridging + 4 terminal O, P(V) | |
| H₃PO₃: dibasic (one P–H) | H₃PO₄: tribasic | |
| H₄P₂O₆ (hypophosphoric): P–P bond, P(+4) | H₄P₂O₇ (pyrophosphoric): P–O–P, P(+5) | |
| PCl₅ solid: [PCl₄]⁺[PCl₆]⁻ | PBr₅ solid: [PBr₄]⁺Br⁻ | |
| N₂O₅ gas: molecular | N₂O₅ solid: [NO₂]⁺[NO₃]⁻ | |
| CaC₂ → acetylene | Al₄C₃, Be₂C → methane |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is the basicity of H₃PO₂?
- Which silicate class has the repeat unit \( (\text{Si}_2\text{O}_5)_n^{2n-} \)?
- What gas is evolved when Al₄C₃ is treated with water?
Answers
- 1. It has one P–OH and two P–H bonds.
- Sheet silicates (phyllosilicates): each tetrahedron shares 3 corners.
- Methane (\( \text{Al}_4\text{C}_3 + 12\text{H}_2\text{O} \rightarrow 4\text{Al(OH)}_3 + 3\text{CH}_4 \)).
Level 2: Part B Style
Practice Q1. Hydrolysis of a mixture of (CH₃)₂SiCl₂ with a small amount of (CH₃)₃SiCl gives mainly:
(a) a cross-linked silicone resin (b) linear silicone chains capped at both ends by (CH₃)₃Si groups (c) silica (d) tetramethylsilane
Answer: (b)
Me₂SiCl₂ gives Me₂Si(OH)₂, which condenses into chains; Me₃SiCl gives Me₃SiOH, which has only one OH and terminates each chain. A resin needs a trifunctional MeSiCl₃.
Practice Q2. The correct order of O–N–O bond angle is:
(a) NO₂⁻ > NO₂ > NO₂⁺ (b) NO₂⁺ > NO₂ > NO₂⁻ (c) NO₂ > NO₂⁺ > NO₂⁻ (d) NO₂⁺ > NO₂⁻ > NO₂
Answer: (b)
NO₂⁺ (no non-bonding electrons on N) is linear, 180°. NO₂ has one odd electron on N: about 134°. NO₂⁻ has a lone pair: about 115°.
Practice Q3. In the cyclic phosphazene (NPCl₂)₃:
(a) the ring is puckered and P–N bonds alternate in length (b) the ring is planar, the P–N bonds are equal, and the π delocalisation is not benzene-like (c) each P carries a lone pair (d) the compound is made from PCl₃ and NH₃
Answer: (b)
The trimer is planar with equal P–N bonds (about 158 pm), but bonding analysis (island model or negative hyperconjugation) shows no ring-wide aromaticity. Each P is four-coordinate with no lone pair. It is made from PCl₅ and NH₄Cl.
Practice Q4. A mineral has the formula Sc₂Si₂O₇. It is a:
(a) orthosilicate (b) pyrosilicate (c) chain silicate (d) sheet silicate
Answer: (b) pyrosilicate
Si₂O₇⁶⁻: two tetrahedra sharing one corner. Charge check: 2 Sc³⁺ = +6, Si₂O₇ = −6. This is thortveitite.
Level 3: Part C Style
Practice Q5. 0.820 g of pure H₃PO₃ (M = 82.0 g mol⁻¹) is dissolved in water. The volume of 0.100 M NaOH needed for complete neutralisation is:
(a) 100 mL (b) 200 mL (c) 300 mL (d) 50 mL
Answer: (b) 200 mL
Moles H₃PO₃ \( = 0.820/82.0 = 0.0100 \) mol. H₃PO₃ is dibasic (HPO(OH)₂: one P–H, two P–OH), so it needs \( 2 \times 0.0100 = 0.0200 \) mol NaOH.
Volume \( = 0.0200/0.100 = 0.200 \) L = 200 mL.
(c) treats it as tribasic; (a) as monobasic.
Practice Q6. 10.0 g of PCl₅ (M = 208.2 g mol⁻¹) reacts completely with excess NH₄Cl to give only (NPCl₂)₃ (M = 347.6 g mol⁻¹) and HCl. Which statements are correct?
- About 5.57 g of trimer forms.
- About 0.192 mol of HCl is evolved.
- Each phosphorus in the product is in the +3 oxidation state.
- The trimer, heated at about 250 °C, gives a linear polymer.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
\( 3\text{PCl}_5 + 3\text{NH}_4\text{Cl} \rightarrow (\text{NPCl}_2)_3 + 12\text{HCl} \)
Moles PCl₅ \( = 10.0/208.2 = 0.0480 \) mol.
- Correct. Trimer \( = 0.0480/3 = 0.0160 \) mol × 347.6 = 5.57 g.
- Correct. HCl \( = 4 \times 0.0480 = 0.192 \) mol.
- Wrong. In NPCl₂ treat N as −3 and Cl as −1: P = +5.
- Correct. Ring-opening polymerisation gives (NPCl₂)ₙ.
Practice Q7. The amphibole tremolite has the formula Ca₂Mg₅(Si₄O₁₁)₂(OH)₂. Which statements are correct?
- The silicate anion is a double chain in which tetrahedra share on average 2.5 corners.
- The formula is charge-balanced.
- Replacing all the silicon by aluminium would leave the formula charge unchanged.
- Its fibrous habit follows from the chain structure.
(a) 1, 2 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 3 and 4 only
Answer: (a) 1, 2 and 4 only
- Correct. \( \text{Si}_4\text{O}_{11}^{6-} \): O/Si = 2.75 = 4 − s/2 → s = 2.5.
- Correct. Cations: 2(+2) + 5(+2) = +14. Anions: 2(−6) + 2(−1) = −14.
- Wrong. Each Al³⁺ for Si⁴⁺ adds one negative charge to the framework; eight substitutions would add −8.
- Correct. Chain and double-chain silicates cleave into fibres (amphibole asbestos).
Quick Revision Table
| Topic | Fact |
|---|---|
| Carbides | Be₂C, Al₄C₃ → CH₄; CaC₂ → C₂H₂; Mg₂C₃ → propyne; SiC covalent; WC interstitial |
| SiCl₄ vs CCl₄ | both favourable; SiCl₄ hydrolyses fast (kinetics, Si size) |
| N(SiH₃)₃ | planar, weak base; (H₃Si)₂O angle about 144° |
| Silicate formula | SiO\(_{4-s/2}\), charge \(-(4-s)\) per Si |
| Silicate classes | ortho 0, pyro 1, ring/chain 2, double chain 2.5, sheet 3, framework 4 |
| Aluminosilicates | one negative charge per Al in tetrahedral sites |
| Silicones | Rochow: MeCl + Si (Cu, 300 °C); R₃SiCl caps, R₂SiCl₂ chains, RSiCl₃ crosslinks |
| Sn/Pb | Sn(II) reducing; Pb(IV) oxidising; Pb₃O₄ = 2PbO·PbO₂ |
| Hydrazine | Raschig: NH₃ + OCl⁻ → NH₂Cl → N₂H₄; gelatin added |
| NF₃ | dipole about 0.23 D vs NH₃ 1.47 D; non-basic |
| N oxides | N₂O linear; NO 11 e⁻ (BO 2.5); NO₂ 134°; N₂O₄ planar; N₂O₅(s) = NO₂⁺NO₃⁻ |
| P oxides | P₄O₆ (6 bridging O); P₄O₁₀ (+4 terminal O) |
| P oxoacids | basicity = number of P–OH: H₃PO₂ 1, H₃PO₃ 2, H₃PO₄ 3, H₄P₂O₇ 4 |
| P halides | PCl₅(s) = [PCl₄]⁺[PCl₆]⁻; PBr₅(s) = [PBr₄]⁺Br⁻ |
| Phosphazenes | PCl₅ + NH₄Cl → (NPCl₂)₃,₄; trimer planar, P–N about 158 pm, not aromatic; 250 °C → polymer |
Key Takeaways
What’s Next
- Groups 16, 17 and 18: Sulfur–Nitrogen Compounds, Interhalogens and Xenon Fluorides.
- Industrial Importance of Main Group Compounds: Haber, Ostwald, phosphate fertilisers, silicones and zeolites in industry.
- Lone pairs and bond angles revisited: VSEPR Theory and Shapes of Molecules.
- Main Group Elements: Quick Revision.