Skip to content

Groups 16, 17 and 18: Sulfur–Nitrogen Compounds, Interhalogens and Xenon Fluorides

CSIR NET chemistry: sulfur oxides and oxoacids, S4N4 and (SN)x, interhalogens, polyhalides, pseudohalogens, halogen oxoacids and xenon compounds.

  • 18 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: The Gas That Was Not Inert
  3. Group 16: Oxygen and Sulfur Compounds
  4. Sulfur–Nitrogen Compounds
  5. Group 17: Interhalogens
  6. Polyhalide Ions
  7. Pseudohalogens and Pseudohalides
  8. Halogen Oxides and Oxoacids
  9. Group 18: Noble Gas Compounds
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: The Gas That Was Not Inert

Group 16: Oxygen and Sulfur Compounds

Hydrogen peroxide

H₂O₂ has a non-planar “open book” structure: the two O–H bonds lie in different planes, with a dihedral angle of about 111° in the gas phase and close to 90° in the crystal (hydrogen bonding changes it). The O–O single bond (about 147 pm) is weak, which is why H₂O₂ decomposes (\( 2\text{H}_2\text{O}_2 \rightarrow 2\text{H}_2\text{O} + \text{O}_2 \)) and acts as both oxidant and reductant. It is made industrially by the anthraquinone process, described on the industrial page.

Sulfur oxides

OxideStructureNotes
SO₂bent, about 119° (\( C_{2v} \))made by burning S or roasting sulfides; reducing agent and also oxidant (with H₂S gives S); bleaches by reduction
SO₃ (gas)trigonal planar (\( D_{3h} \))made by catalytic oxidation of SO₂ (contact process)
SO₃ (solid)γ form: cyclic trimer S₃O₉; other forms: chains and layers of SO₄ tetrahedravery hygroscopic; the anhydride of H₂SO₄

Oxoacids of sulfur

AcidFormulaKey structural featureOxidation state of S
SulfurousH₂SO₃(exists in solution as SO₂·nH₂O and HSO₃⁻)+4
SulfuricH₂SO₄tetrahedral SO₂(OH)₂+6
Disulfuric (pyrosulfuric, oleum)H₂S₂O₇S–O–S bridge+6
ThiosulfuricH₂S₂O₃one O of sulfate replaced by S (S–S bond)average +2
DithionousH₂S₂O₄S–S bond (long and weak in dithionite)+3
DithionicH₂S₂O₆S–S bond+5
Peroxomonosulfuric (Caro’s acid)H₂SO₅one –O–O–H group+6
Peroxodisulfuric (Marshall’s acid)H₂S₂O₈S–O–O–S bridge+6
PolythionicH₂SₙO₆ (n = 3–6)chain of S atoms between two SO₃ groupsaverage \( 10/n \)

Thiosulfate and iodine (the basis of iodometry):

$$\text{I}_2 + 2\text{S}_2\text{O}_3^{2-} \rightarrow 2\text{I}^- + \text{S}_4\text{O}_6^{2-}$$

Tetrathionate has an average sulfur oxidation state of +2.5. Thiosulfate also dissolves silver halides by complexation (\( \text{AgBr} + 2\text{S}_2\text{O}_3^{2-} \rightarrow [\text{Ag(S}_2\text{O}_3)_2]^{3-} + \text{Br}^- \)), its use as photographic “hypo”.

Sulfur fluorides

  • SF₆: octahedral, very inert (hydrolysis is thermodynamically allowed but kinetically blocked: six fluorines shield the sulfur), used as an insulating gas in switchgear.
  • SF₄: see-saw (four bonds, one lone pair), reactive; converts C=O groups into CF₂ and is a selective fluorinating agent.

Sulfur–Nitrogen Compounds

Tetrasulfur tetranitride, S₄N₄

Synthesis (in an inert solvent such as CCl₄ or benzene):

$$6\text{S}_2\text{Cl}_2 + 16\text{NH}_3 \rightarrow \text{S}_4\text{N}_4 + \text{S}_8 + 12\text{NH}_4\text{Cl}$$

Structure: an eight-membered ring of alternating S and N folded into a cradle (cage): the four N atoms lie in a plane, and the four S atoms form a flattened tetrahedron above and below it. Point group \( D_{2d} \).

  • All S–N bonds are equal (about 162 pm), intermediate between single and double bonds: the π electrons are delocalised.
  • The two cross-ring S···S distances (about 258 pm) are much shorter than the van der Waals contact, indicating weak transannular S–S bonding.
  • S₄N₄ is orange, thermochromic (deeper colour when hot) and explosive on shock or rapid heating, because it decomposes to the very stable N₂ and S₈.

Compare As₄S₄ (realgar), which has the same cage with the roles of the group 15 and group 16 atoms interchanged: the As atoms carry the cross-ring As–As bonds, and every bond is an ordinary electron-precise single bond (As three-connected, S two-connected), so no delocalisation is needed.

Disulfur dinitride and polythiazyl

Passing S₄N₄ vapour over hot silver wool gives S₂N₂:

  • Square planar four-membered ring (\( D_{2h} \)), alternating S and N.
  • 6 π electrons in the ring (a Hückel 4n + 2 count); its detailed bonding (including partial diradical character) is still discussed.
  • Unstable: at room temperature, in the solid, it polymerises to (SN)ₓ, polythiazyl.

(SN)ₓ is a lustrous, golden-bronze polymer of nearly planar zig-zag S–N chains. It is a metallic conductor along the chains and becomes superconducting at very low temperature (below about 0.3 K). It was the first known polymeric metal and superconductor containing no metal atoms.

Other S–N species worth recognising: the thiazyl halides NSF and NSCl, and cyclic cations such as \( \text{S}_4\text{N}_3^+ \) (a planar seven-membered ring, 10 π electrons).

Group 17: Interhalogens

Interhalogens have formulas XY, XY₃, XY₅ and XY₇, where X is the larger, less electronegative halogen. The odd number of Y atoms keeps the total electron count even. The higher members need a large central atom and small ligands, so they are mainly fluorides: IF₇ is the only XY₇.

TypeExamplesSteric number of XShape
XYClF, BrF, ICl, IBr—linear (diatomic)
XY₃ClF₃, BrF₃, IF₃; ICl₃ (as I₂Cl₆)5 (2 lone pairs)T-shaped (lone pairs equatorial)
XY₅ClF₅, BrF₅, IF₅6 (1 lone pair)square pyramidal
XY₇IF₇7 (0 lone pairs)pentagonal bipyramidal (\( D_{5h} \))

ICl₃ exists as the planar dimer I₂Cl₆: each I is square planar (four Cl, two of them bridging, plus two lone pairs above and below the plane).

Preparation: usually direct combination under controlled conditions; the ratio of reactants and temperature decides the product (for example, Cl₂ with F₂ gives ClF and, with more fluorine and higher temperature, ClF₃; IF₅ is fluorinated further to IF₇ by heating with F₂).

Reactivity: interhalogens are more reactive than the parent halogens (except F₂), because the X–Y bond is polar and weaker than X–X. ClF₃ and BrF₃ are among the most aggressive fluorinating agents known: ClF₃ is used to convert uranium to UF₆.

Self-ionisation: liquid BrF₃ and ICl conduct electricity:

$$2\text{BrF}_3 \rightleftharpoons \text{BrF}_2^+ + \text{BrF}_4^- \qquad 2\text{ICl} \rightleftharpoons \text{I}^+ + \text{ICl}_2^-$$

So BrF₃ is a non-aqueous solvent in which fluoride donors (KF → K⁺BrF₄⁻) are bases and fluoride acceptors (SbF₅ → BrF₂⁺SbF₆⁻) are acids, in the solvent-system sense of the Acids, Bases and Non-aqueous Solvents unit.

Polyhalide Ions

IonElectron pairs on central atomShape
\( \text{I}_3^- \), \( \text{ICl}_2^- \), \( \text{IBrCl}^- \)5 (3 lone pairs)linear
\( \text{ICl}_4^- \), \( \text{BrF}_4^- \)6 (2 lone pairs)square planar
\( \text{I}_5^- \)V-shaped (I⁻ bridging two I₂ units; L-shaped in some salts)
\( \text{I}_3^+ \), \( \text{ICl}_2^+ \), \( \text{BrF}_2^+ \)4 (2 lone pairs)bent
\( \text{IF}_6^+ \)6 (no lone pair)octahedral
  • Formation: \( \text{KI} + \text{I}_2 \rightarrow \text{KI}_3 \), which is why iodine dissolves in aqueous KI. In solids, the triiodide may be symmetric or asymmetric depending on the cation.
  • Large cations stabilise polyhalide anions (Cs⁺, R₄N⁺): CsI₃ is a stable solid.
  • Thermal decomposition gives the metal halide with the highest lattice energy, that is with the smallest halide:
$$\text{CsICl}_2 \xrightarrow{\text{heat}} \text{CsCl} + \text{ICl} \quad (\text{not CsI} + \text{Cl}_2)$$

Three-centre four-electron bonding

In I₃⁻ (and in XeF₂, below) three p orbitals along one axis combine into one bonding, one non-bonding and one antibonding MO. Four electrons fill the bonding and non-bonding orbitals. Each I–I bond has a bond order of ½, which is why the I–I bonds in I₃⁻ are longer than in I₂. The non-bonding MO has its density on the terminal atoms, so the arrangement is most stable with electronegative terminal atoms: the least electronegative halogen sits in the middle (I in ICl₂⁻, not Cl). No d orbitals are needed.

Pseudohalogens and Pseudohalides

Pseudohalides are anions that behave like halides; pseudohalogens are their dimers.

PseudohalidePseudohalogen
CN⁻ (cyanide)(CN)₂, cyanogen, linear N≡C–C≡N
SCN⁻ (thiocyanate)(SCN)₂, thiocyanogen
SeCN⁻ (selenocyanate)(SeCN)₂
OCN⁻ (cyanate)(no stable dimer)
N₃⁻ (azide)(no dimer; but halogen azides like IN₃ are known)

Halogen-like behaviour:

  1. They form insoluble silver, mercury(I) and lead(II) salts (AgCN, AgSCN).
  2. They form acids HX (HCN, HSCN, HN₃), generally weaker than HCl.
  3. The dimers disproportionate in base like halogens: \( (\text{CN})_2 + 2\text{OH}^- \rightarrow \text{CN}^- + \text{OCN}^- + \text{H}_2\text{O} \) (compare \( \text{Cl}_2 + 2\text{OH}^- \rightarrow \text{Cl}^- + \text{OCl}^- + \text{H}_2\text{O} \)).
  4. They form “interhalogen-like” compounds: ClCN, BrCN, ICN.
  5. They act as ligands and form complex anions ([Ag(CN)₂]⁻, [Hg(SCN)₄]²⁻).
  6. Oxidation of the anion gives the dimer: \( 2\text{Cu}^{2+} + 4\text{CN}^- \rightarrow 2\text{CuCN} + (\text{CN})_2 \).

Thiocyanate is ambidentate: it binds soft metals through S and hard metals through N.

Halogen Oxides and Oxoacids

Oxides

CompoundNote
OF₂oxygen difluoride (F is more electronegative, so O is +2); bent
Cl₂Obent; anhydride of HOCl
ClO₂odd-electron, paramagnetic, bent, yellow gas; explosive when concentrated; made on site and used to bleach paper pulp and treat water
Cl₂O₆in the solid, [ClO₂]⁺[ClO₄]⁻
Cl₂O₇O₃Cl–O–ClO₃; anhydride of HClO₄
I₂O₅white solid; oxidises CO quantitatively: \( \text{I}_2\text{O}_5 + 5\text{CO} \rightarrow \text{I}_2 + 5\text{CO}_2 \), used to estimate CO

Oxoacids and Pauling’s rules

For an oxoacid written \( \text{O}_p\text{E(OH)}_q \), Pauling’s rules estimate the strength:

$$\boxed{\text{p}K_{a1} \approx 8 - 5p} \qquad \text{successive p}K_a \text{ values increase by about 5}$$

where \( p \) is the number of oxygen atoms not bonded to H.

AcidStructure\( p \)Predicted pKaObserved (approximately)
HOClCl(OH)087.5
HClO₂OCl(OH)132
HClO₃O₂Cl(OH)2−2about −1
HClO₄O₃Cl(OH)3−7very strong (about −10)
H₃PO₄OP(OH)₃132.1
H₃PO₃OPH(OH)₂13close to 2

The H₃PO₃ entry is the classic test: if phosphorous acid were P(OH)₃ (\( p = 0 \)) Pauling’s rule would predict pKa about 8. The observed strong first dissociation confirms the HPO(OH)₂ structure, with one P–H bond.

Other trends to remember:

  • Acid strength: HOCl > HOBr > HOI (more electronegative halogen pulls more electron density from O–H).
  • Thermal stability of the oxoanions increases with oxidation state: ClO₄⁻ is the most stable; hypochlorite disproportionates on warming (\( 3\text{ClO}^- \rightarrow 2\text{Cl}^- + \text{ClO}_3^- \)).
  • Oxidising action: perchlorate is a powerful oxidant thermodynamically but kinetically slow in dilute solution; hypochlorite reacts fast. Do not equate oxidation state with oxidising speed.
  • Periodic acid: iodine(VII) forms the octahedral orthoperiodic acid H₅IO₆ (iodine is large enough for six oxygens), as well as HIO₄ (metaperiodic). HOF is the only oxoacid of fluorine.

Group 18: Noble Gas Compounds

Xenon fluorides

CompoundPreparation (outline)Electron pairs on XeShape
XeF₂Xe + F₂ with excess Xe, heat or UV light5 (3 lone pairs)linear
XeF₄Xe + F₂ (more F₂), heat under pressure6 (2 lone pairs)square planar
XeF₆Xe + large excess F₂, higher pressure7 (1 lone pair)distorted octahedron (fluxional in the gas); the solid contains XeF₅⁺ and F⁻ units

The product is controlled by the Xe : F₂ ratio, temperature and pressure: more fluorine and higher pressure give the higher fluorides.

Bonding in XeF₂: a linear F–Xe–F 3c–4e bond, exactly as in I₃⁻ (XeF₂ is isoelectronic with I₃⁻ in valence electrons). The two Xe–F bonds each have bond order ½. Xenon fluorides form because Xe is the noble gas with a low enough ionisation energy and F the ligand electronegative enough to stabilise the non-bonding MO.

Hydrolysis

$$2\text{XeF}_2 + 2\text{H}_2\text{O} \rightarrow 2\text{Xe} + 4\text{HF} + \text{O}_2$$

$$6\text{XeF}_4 + 12\text{H}_2\text{O} \rightarrow 4\text{Xe} + 2\text{XeO}_3 + 24\text{HF} + 3\text{O}_2$$

$$\text{XeF}_6 + 3\text{H}_2\text{O} \rightarrow \text{XeO}_3 + 6\text{HF} \qquad \text{(partial: } \text{XeF}_6 + \text{H}_2\text{O} \rightarrow \text{XeOF}_4 + 2\text{HF})$$

XeF₂ hydrolysis is a redox reaction (Xe(II) oxidises water); XeF₄ disproportionates (Xe(IV) → Xe(0) + Xe(VI)); XeF₆ hydrolysis is not redox (Xe stays +6).

Oxides, oxofluorides and xenates

CompoundOx. stateElectron pairs on XeShape
XeO₃+64 (1 lone pair)trigonal pyramidal; dangerously explosive solid
XeO₄+84 (0 lone pairs)tetrahedral; explosive gas
XeOF₄+66 (1 lone pair)square pyramidal (O apical)
XeO₂F₂+65 (1 lone pair)see-saw
XeO₃F₂+85 (0)trigonal bipyramidal
\( \text{XeO}_6^{4-} \) (perxenate)+86 (0)octahedral

In strong alkali, xenate(VI) disproportionates to perxenate: \( 2\text{HXeO}_4^- + 2\text{OH}^- \rightarrow \text{XeO}_6^{4-} + \text{Xe} + \text{O}_2 + 2\text{H}_2\text{O} \). XeO₄ is obtained by treating a perxenate (Ba₂XeO₆) with concentrated H₂SO₄.

Fluoride donor and acceptor chemistry

  • Fluoride donors: \( \text{XeF}_2 + \text{SbF}_5 \rightarrow [\text{XeF}]^+[\text{SbF}_6]^- \); XeF₆ gives [XeF₅]⁺ salts.
  • Fluoride acceptor: \( \text{XeF}_6 + \text{CsF} \rightarrow \text{Cs}^+[\text{XeF}_7]^- \); XeF₄ gives [XeF₅]⁻ (pentagonal planar).
  • XeF₂ is a clean fluorinating agent (it releases only Xe as by-product).

Other noble gases

  • Krypton: KrF₂ is known (linear, a stronger oxidant than XeF₂); krypton chemistry is essentially Kr(II).
  • Argon: no stable bulk compound; the molecule HArF has been detected in a solid argon matrix at very low temperature.
  • Radon: forms a fluoride, but its radioactivity makes the chemistry hard to study.
  • Clathrates: Ar, Kr and Xe are trapped in cages of ice or β-quinol crystals without chemical bonds; these are inclusion compounds, not true compounds.

Isoelectronic analogies

Xenon speciesIsoelectronic (valence) iodine speciesShape
XeF₂\( \text{ICl}_2^- \), \( \text{I}_3^- \)linear
XeF₄\( \text{ICl}_4^- \)square planar
XeO₃\( \text{IO}_3^- \)pyramidal
XeO₆⁴⁻\( \text{IO}_6^{5-} \)octahedral

Memory Tricks

Don’t Confuse

ThisvsThat
ClF₃: T-shaped (2 lone pairs equatorial)BF₃: trigonal planar (no lone pair)
XeF₄: square planarSF₄: see-saw; CF₄: tetrahedral
XeOF₄: square pyramidalXeO₂F₂: see-saw
OF₂: oxygen difluoride (O at +2)Cl₂O: dichlorine oxide (O at −2)
S₄N₄: group 16 atoms (S) carry the weak transannular contacts; delocalised S–N bondsAs₄S₄: group 15 atoms (As) carry full As–As bonds; electron-precise
S₂N₂: square planar monomer(SN)ₓ: metallic, superconducting polymer
H₂S₂O₇: S–O–S, both S +6H₂S₂O₈: S–O–O–S, both S +6
Dithionic H₂S₂O₆: S–S, S +5dithionous H₂S₂O₄: S–S, S +3
Pseudohalogen (CN)₂pseudohalide CN⁻

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the shape of IF₇?
  2. What is the oxidation state of sulfur in H₂SO₅?
  3. Which noble-gas fluoride is square planar?
Answers
  1. Pentagonal bipyramidal (seven bonds, no lone pair).
  2. +6. One peroxide group (O at −1).
  3. XeF₄ (four bonds, two lone pairs trans to each other).

Level 2: Part B Style

Practice Q1. The shapes of ClF₃, XeOF₄ and ICl₄⁻ are respectively:

(a) T-shaped, square pyramidal, square planar (b) trigonal planar, square pyramidal, tetrahedral (c) T-shaped, octahedral, square planar (d) pyramidal, see-saw, tetrahedral

Answer: (a)
  • ClF₃: 3 bonds + 2 lone pairs (5 pairs): T-shaped.
  • XeOF₄: 5 bonding positions + 1 lone pair (6 pairs): square pyramidal.
  • ICl₄⁻: 4 bonds + 2 lone pairs (6 pairs): square planar.

Practice Q2. On heating, CsIBrCl decomposes to:

(a) CsI + BrCl (b) CsBr + ICl (c) CsCl + IBr (d) Cs + I + BrCl

Answer: (c) CsCl + IBr

The product metal halide is the one with the highest lattice energy, which contains the smallest halide, Cl⁻. The remaining I and Br leave as IBr.

Practice Q3. Which hydrolysis is not a redox reaction?

(a) XeF₂ → Xe (b) XeF₄ → Xe + XeO₃ (c) XeF₆ → XeO₃ (d) all three are redox

Answer: (c)

In XeF₆ and XeO₃, xenon is +6 in both. XeF₂ hydrolysis reduces Xe(II) to Xe(0) and oxidises water to O₂; XeF₄ hydrolysis disproportionates Xe(IV) to Xe(0) and Xe(VI) (and also gives O₂).

Practice Q4. Which statement about S₄N₄ is correct?

(a) It is a planar eight-membered ring. (b) It has two short transannular S···S contacts and all S–N bonds equal. (c) It is made from SO₂ and NH₃. (d) It is a metallic conductor.

Answer: (b)

S₄N₄ is a cradle-shaped cage (\( D_{2d} \)) with equal S–N bonds and two cross-ring S···S contacts. It is made from S₂Cl₂ (or SCl₂) and NH₃. The metallic conductor is the polymer (SN)ₓ, made via S₂N₂.

Level 3: Part C Style

Practice Q5. A sample of KIO₃ is treated with excess KI in acid, and the liberated iodine needs 25.0 mL of 0.100 M Na₂S₂O₃. The mass of KIO₃ (M = 214.0 g mol⁻¹) is closest to:

(a) 89 mg (b) 178 mg (c) 268 mg (d) 535 mg

Answer: (a) 89 mg

\( \text{IO}_3^- + 5\text{I}^- + 6\text{H}^+ \rightarrow 3\text{I}_2 + 3\text{H}_2\text{O} \) and \( \text{I}_2 + 2\text{S}_2\text{O}_3^{2-} \rightarrow 2\text{I}^- + \text{S}_4\text{O}_6^{2-} \).

So 1 IO₃⁻ ≡ 3 I₂ ≡ 6 S₂O₃²⁻.

Thiosulfate \( = 0.0250 \times 0.100 = 2.50 \times 10^{-3} \) mol; KIO₃ \( = 2.50 \times 10^{-3}/6 = 4.17 \times 10^{-4} \) mol; mass \( = 4.17 \times 10^{-4} \times 214.0 = 0.0892 \) g = 89 mg.

(b) uses a 1 : 3 ratio (forgets that each I₂ needs 2 thiosulfate); (d) uses 1 : 1.

Practice Q6. 2.453 g of XeF₆ (M = 245.3 g mol⁻¹) is completely hydrolysed. Which statements are correct?

  1. About 1.79 g of XeO₃ (M = 179.3 g mol⁻¹) is formed.
  2. 0.060 mol of HF is formed.
  3. The oxidation state of xenon changes during the reaction.
  4. The product XeO₃ has a trigonal planar structure.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2 and 4 only

Answer: (a) 1 and 2 only

\( \text{XeF}_6 + 3\text{H}_2\text{O} \rightarrow \text{XeO}_3 + 6\text{HF} \). Moles XeF₆ \( = 2.453/245.3 = 0.0100 \).

  1. Correct. XeO₃ \( = 0.0100 \times 179.3 = 1.79 \) g.
  2. Correct. HF \( = 6 \times 0.0100 = 0.060 \) mol.
  3. Wrong. Xe is +6 in both.
  4. Wrong. XeO₃ has 3 bonding pairs + 1 lone pair: trigonal pyramidal.

Practice Q7. Using Pauling’s rules (pKa₁ ≈ 8 − 5p), which statements are correct?

  1. The predicted pKa₁ of HClO₃ is about −2.
  2. H₃PO₃ and H₃PO₄ are predicted to have similar first pKa values.
  3. If H₃PO₃ had the structure P(OH)₃, its predicted pKa₁ would be about 8.
  4. HIO₄ is predicted to be a weaker acid than HOI.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. HClO₃ = O₂Cl(OH): \( p = 2 \), \( 8 - 10 = -2 \).
  2. Correct. Both have \( p = 1 \) (OP(OH)₃ and OPH(OH)₂): predicted 3 for each; observed values are both near 2.
  3. Correct. P(OH)₃ would have \( p = 0 \): predicted 8. The observed strong acidity supports the P–H structure.
  4. Wrong. HIO₄ = O₃I(OH): \( p = 3 \), predicted −7; HOI: \( p = 0 \), predicted 8. HIO₄ is far stronger.

Quick Revision Table

TopicFact
H₂O₂open book; dihedral about 111° (gas), about 90° (crystal)
SO₂ / SO₃bent 119° / planar; solid SO₃ trimer or chains
S oxoacidsH₂S₂O₇ S–O–S; H₂S₂O₈ S–O–O–S (+6); H₂S₂O₆ S–S (+5); H₂S₂O₄ S–S (+3); H₂S₂O₃ (avg +2)
IodometryI₂ + 2S₂O₃²⁻ → 2I⁻ + S₄O₆²⁻ (avg S +2.5)
SF₆ / SF₄octahedral inert / see-saw fluorinating agent
S₄N₄6S₂Cl₂ + 16NH₃; cradle \( D_{2d} \); S–N 162 pm; S···S 258 pm; explosive
S₂N₂ → (SN)ₓsquare planar → metallic, superconducting polymer
InterhalogensXY₃ T-shaped, XY₅ square pyramidal, IF₇ pentagonal bipyramid; I₂Cl₆ planar dimer
Self-ionisation2BrF₃ ⇌ BrF₂⁺ + BrF₄⁻; 2ICl ⇌ I⁺ + ICl₂⁻
PolyhalidesI₃⁻, ICl₂⁻ linear; ICl₄⁻ square planar; I₃⁺ bent; decompose to smallest halide salt
3c–4eI₃⁻, XeF₂: bond order ½ per bond; least electronegative atom central
Pseudohalogens(CN)₂, (SCN)₂; Ag salts insoluble; disproportionate in base
Halogen oxidesOF₂ (O +2); ClO₂ paramagnetic bleach; I₂O₅ estimates CO
PaulingpKa₁ ≈ 8 − 5p; HOCl 7.5, HClO₄ very strong
Xe fluoridesXeF₂ linear, XeF₄ square planar, XeF₆ distorted octahedron
Xe hydrolysisXeF₂ redox; XeF₄ disproportionation; XeF₆ not redox (→ XeO₃)
Xe oxidesXeO₃ pyramidal; XeO₄ tetrahedral; XeOF₄ square pyramidal; XeO₆⁴⁻ octahedral

Key Takeaways

What’s Next