Industrial Importance of Main Group Compounds
CSIR NET chemistry: Haber, Ostwald, contact, chlor-alkali and Solvay processes, H2O2, phosphates, silicones, zeolites, boron and halogen compounds in industry.
- 18 min
On this page · 21 sections
- Prerequisites
- The Hook: Bread From Air
- Overview of the Big Processes
- Ammonia: The Haber–Bosch Process
- Nitric Acid: The Ostwald Process
- Sulfuric Acid: The Contact Process
- Chlor-Alkali Industry
- Sodium Carbonate: The Solvay (Ammonia-Soda) Process
- Hydrogen Peroxide: The Anthraquinone Process
- Phosphorus: Phosphoric Acid and Fertilisers
- Silicon Compounds
- Boron and Aluminium Compounds
- Halogens and Noble Gases
- Carbon and Sulfur Compounds
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Groups 14 and 15 Compounds: silicones, silicates, nitrogen oxides and phosphorus oxoacids, whose manufacture and uses this page covers.
- Groups 16, 17 and 18 Compounds: sulfur oxides, halogen compounds and xenon fluorides.
- s-Block and Group 13 Compounds: borax, NaBH₄ and the alkali metal compounds.
- Equilibrium and Le Chatelier reasoning (Chemical Thermodynamics unit); quick percentage arithmetic from Numerical Ability.
The Hook: Bread From Air
Overview of the Big Processes
graph LR
A[Air: N2] --> H[Haber-Bosch: NH3]
B[Natural gas: CH4 + H2O] --> H
H --> O[Ostwald: HNO3]
H --> U[Urea, ammonium salts]
H --> SV[Solvay: Na2CO3]
O --> AN[NH4NO3 fertiliser, explosives]
S[Sulfur or sulfide ores] --> C[Contact: H2SO4]
C --> P[Wet process: H3PO4 and superphosphate]
N[Brine: NaCl] --> CA[Chlor-alkali: NaOH, Cl2, H2]
N --> SVAmmonia: The Haber–Bosch Process
$$\text{N}_2(\text{g}) + 3\text{H}_2(\text{g}) \rightleftharpoons 2\text{NH}_3(\text{g}) \qquad \Delta H^\circ \approx -92\ \text{kJ mol}^{-1}$$(per 2 mol NH₃, that is about −46 kJ per mol of NH₃).
| Condition | Typical choice | Reason |
|---|---|---|
| Pressure | high (about 150–300 bar) | 4 mol of gas → 2 mol: high pressure shifts the equilibrium right and increases rate |
| Temperature | moderate (about 400–500 °C) | the reaction is exothermic, so low temperature favours yield, but the rate is too slow; a compromise |
| Catalyst | iron (from magnetite), promoted with K₂O and Al₂O₃ (and CaO) | Al₂O₃ is a structural promoter (prevents sintering); K₂O is an electronic promoter (helps N₂ dissociation) |
| Recycling | NH₃ condensed out, unreacted gas recycled | conversion per pass is only partial |
The rate-determining step on the catalyst surface is the dissociative adsorption of N₂, because of the very strong N≡N bond. Catalyst poisons include oxygen compounds and sulfur compounds, so the synthesis gas must be purified.
Where the hydrogen comes from: mostly steam reforming of natural gas, \( \text{CH}_4 + \text{H}_2\text{O} \rightarrow \text{CO} + 3\text{H}_2 \), followed by the water-gas shift, \( \text{CO} + \text{H}_2\text{O} \rightarrow \text{CO}_2 + \text{H}_2 \). Nitrogen enters with air in a secondary reformer, where the oxygen is burnt off.
Uses of ammonia: fertilisers (urea, ammonium nitrate, ammonium sulfate, ammonium phosphates), nitric acid, the Solvay process, refrigeration, nylon and other polymers.
Urea: \( 2\text{NH}_3 + \text{CO}_2 \rightarrow \text{NH}_2\text{COONH}_4 \) (ammonium carbamate) \( \rightarrow \text{CO(NH}_2)_2 + \text{H}_2\text{O} \).
Nitric Acid: The Ostwald Process
$$4\text{NH}_3 + 5\text{O}_2 \xrightarrow{\text{Pt–Rh gauze}} 4\text{NO} + 6\text{H}_2\text{O}$$$$2\text{NO} + \text{O}_2 \rightarrow 2\text{NO}_2$$$$3\text{NO}_2 + \text{H}_2\text{O} \rightarrow 2\text{HNO}_3 + \text{NO}$$- The first step runs at high temperature with a contact time of milliseconds on the gauze, so that NH₃ is oxidised to NO and not to N₂ (the thermodynamically preferred product): the catalyst controls selectivity.
- The NO formed in the last step is recycled.
- Distillation gives about 68 % HNO₃ (an azeotrope with water); more concentrated acid needs a dehydrating agent such as concentrated H₂SO₄.
Uses: ammonium nitrate (fertiliser and explosive), nitration (explosives such as TNT, nitroglycerine; dyes; nylon intermediates), metal treatment.
Sulfuric Acid: The Contact Process
$$\text{S} + \text{O}_2 \rightarrow \text{SO}_2 \quad \text{(or roasting of sulfide ores)}$$$$2\text{SO}_2 + \text{O}_2 \rightleftharpoons 2\text{SO}_3 \qquad \Delta H^\circ \approx -197\ \text{kJ mol}^{-1}$$$$\text{SO}_3 + \text{H}_2\text{SO}_4 \rightarrow \text{H}_2\text{S}_2\text{O}_7 \ (\text{oleum}) \qquad \text{H}_2\text{S}_2\text{O}_7 + \text{H}_2\text{O} \rightarrow 2\text{H}_2\text{SO}_4$$| Condition | Choice | Reason |
|---|---|---|
| Catalyst | V₂O₅ (with K₂SO₄ promoter on silica) | cheaper and less easily poisoned than platinum |
| Temperature | about 400–450 °C in the beds, with cooling between beds | exothermic: lower T favours SO₃, but the catalyst needs heat to work |
| Pressure | about 1–2 bar | conversion is already high; high pressure would cost more than it gains |
| Absorption | SO₃ absorbed in 98 % H₂SO₄, not in water | SO₃ + water forms a fine acid mist that is hard to condense |
| Double contact, double absorption | SO₃ removed between beds | removing product pushes the remaining SO₂ to react; raises overall conversion and cuts SO₂ emissions |
The V₂O₅ catalyst works by a redox cycle: V(V) oxidises SO₂ to SO₃ and is reduced to V(IV), which O₂ reoxidises.
Uses of H₂SO₄: the largest use is phosphate fertilisers (wet-process H₃PO₄ and superphosphate); also ammonium sulfate, petroleum refining, pigments (TiO₂), detergents (sulfonation), lead–acid batteries, metal pickling. It is often called the most produced industrial chemical by mass.
Chlor-Alkali Industry
Electrolysis of concentrated brine:
$$2\text{NaCl} + 2\text{H}_2\text{O} \xrightarrow{\text{electrolysis}} 2\text{NaOH} + \text{Cl}_2 + \text{H}_2$$- Anode (oxidation): \( 2\text{Cl}^- \rightarrow \text{Cl}_2 + 2e^- \). Chlorine is evolved rather than O₂, despite O₂ being thermodynamically easier, because of the high overpotential for oxygen evolution on the coated titanium (dimensionally stable) anodes.
- Cathode (reduction): \( 2\text{H}_2\text{O} + 2e^- \rightarrow \text{H}_2 + 2\text{OH}^- \).
- The products must be kept apart, or Cl₂ reacts with OH⁻ to give hypochlorite (and chlorate when hot).
| Cell | Separator | Notes |
|---|---|---|
| Membrane cell | cation-exchange membrane (perfluorinated sulfonate/carboxylate polymer such as Nafion) passes Na⁺ only | pure, concentrated NaOH; the modern standard |
| Diaphragm cell | porous diaphragm (historically asbestos) | NaOH contaminated with NaCl |
| Mercury cell | Na forms an amalgam at a flowing Hg cathode, decomposed separately with water | very pure NaOH, but mercury pollution; being phased out |
Uses: NaOH for soap, paper, alumina (Bayer process), textiles, chemicals. Cl₂ for PVC (via vinyl chloride), water treatment, solvents, HCl, titanium production (TiCl₄), bleaches. Bleaching powder is made from Cl₂ and slaked lime (nominally Ca(OCl)Cl); sodium hypochlorite from Cl₂ and cold NaOH.
Sodium Carbonate: The Solvay (Ammonia-Soda) Process
- Brine is saturated with NH₃, then carbonated with CO₂: $$\text{NaCl} + \text{NH}_3 + \text{CO}_2 + \text{H}_2\text{O} \rightarrow \text{NaHCO}_3\downarrow + \text{NH}_4\text{Cl}$$
- NaHCO₃, the least soluble salt present, precipitates and is calcined: $$2\text{NaHCO}_3 \rightarrow \text{Na}_2\text{CO}_3 + \text{CO}_2 + \text{H}_2\text{O}$$
- CO₂ comes from limestone: \( \text{CaCO}_3 \rightarrow \text{CaO} + \text{CO}_2 \), plus the CO₂ from step 2.
- Ammonia is recovered with the lime: \( 2\text{NH}_4\text{Cl} + \text{Ca(OH)}_2 \rightarrow 2\text{NH}_3 + \text{CaCl}_2 + 2\text{H}_2\text{O} \).
Ammonia is a recycled reagent, not consumed; CaCl₂ is the main by-product. This net reaction is not spontaneous as written in aqueous solution; it works because the steps exploit the low solubility of NaHCO₃.
Uses of Na₂CO₃ (soda ash): glass manufacture (the largest use), detergents, water softening, paper, chemicals. NaHCO₃: baking soda, antacid, fire extinguishers.
Hydrogen Peroxide: The Anthraquinone Process
$$\text{2-alkylanthraquinol} + \text{O}_2 \rightarrow \text{2-alkylanthraquinone} + \text{H}_2\text{O}_2$$$$\text{2-alkylanthraquinone} + \text{H}_2 \xrightarrow{\text{Pd}} \text{2-alkylanthraquinol}$$Net: \( \text{H}_2 + \text{O}_2 \rightarrow \text{H}_2\text{O}_2 \), with the anthraquinone as a recycled hydrogen carrier. The H₂O₂ is extracted into water and concentrated by distillation.
Uses: bleaching of paper pulp and textiles (a chlorine-free alternative), wastewater treatment, synthesis of peroxo compounds (sodium perborate and percarbonate in detergents), propylene oxide manufacture, and as a “green” oxidant because its by-product is water.
Phosphorus: Phosphoric Acid and Fertilisers
Wet process (most phosphoric acid):
$$\text{Ca}_3(\text{PO}_4)_2 + 3\text{H}_2\text{SO}_4 \rightarrow 2\text{H}_3\text{PO}_4 + 3\text{CaSO}_4$$(the real rock is fluorapatite, Ca₅(PO₄)₃F, and the by-product is gypsum, with HF/H₂SiF₆). The acid is impure but suitable for fertilisers.
Thermal (furnace) process (pure acid via elemental P):
$$2\text{Ca}_3(\text{PO}_4)_2 + 6\text{SiO}_2 + 10\text{C} \rightarrow 6\text{CaSiO}_3 + \text{P}_4 + 10\text{CO}$$P₄ is burnt to P₄O₁₀ and hydrated to pure H₃PO₄ for food, pharmaceutical and detergent uses.
Fertilisers:
| Product | Made from | Main phosphorus compound |
|---|---|---|
| Single superphosphate | phosphate rock + H₂SO₄ | Ca(H₂PO₄)₂ mixed with CaSO₄ |
| Triple superphosphate | phosphate rock + H₃PO₄: \( \text{Ca}_3(\text{PO}_4)_2 + 4\text{H}_3\text{PO}_4 \rightarrow 3\text{Ca(H}_2\text{PO}_4)_2 \) | Ca(H₂PO₄)₂ without gypsum dilution |
| Ammonium phosphates (MAP, DAP) | NH₃ + H₃PO₄ | NH₄H₂PO₄, (NH₄)₂HPO₄ |
Fertiliser grades are expressed as % “P₂O₅” by convention, even though no P₂O₅ is present: the conversion makes different phosphates comparable.
Other phosphates: sodium tripolyphosphate, Na₅P₃O₁₀, was widely used as a detergent builder (it sequesters Ca²⁺ and Mg²⁺); phosphate run-off contributes to eutrophication of lakes, which led many countries to limit it. P₄S₃ in matches; organophosphates as pesticides and flame-retardants.
Silicon Compounds
| Material | Production / composition | Uses |
|---|---|---|
| Silicon (metallurgical grade) | \( \text{SiO}_2 + 2\text{C} \rightarrow \text{Si} + 2\text{CO} \) in an electric arc furnace | aluminium and steel alloys, silicones (Rochow process) |
| Silicon (electronic grade) | Si → SiHCl₃ (with HCl), purified by distillation, decomposed on hot Si rods with H₂ (Siemens process); single crystals then grown | semiconductors, solar cells |
| Silicones | Rochow process + hydrolysis (see Groups 14 and 15) | sealants, lubricants, water repellents, insulation, medical implants, cosmetics |
| Glass | soda-lime glass from sand, Na₂CO₃ and CaCO₃; borosilicate glass adds B₂O₃ | containers, windows; borosilicate for heat-resistant labware |
| Portland cement | limestone + clay heated in a kiln to clinker, ground with a little gypsum | main phases: tricalcium silicate, dicalcium silicate, tricalcium aluminate, tetracalcium aluminoferrite; setting is hydration to calcium silicate hydrate |
| Silica gel | from sodium silicate + acid, dried | desiccant, chromatography |
| SiC | SiO₂ + C in an electric furnace (Acheson process) | abrasive, refractory, power electronics |
Zeolites
Zeolites are crystalline aluminosilicates with open 3D frameworks of corner-sharing SiO₄ and AlO₄ tetrahedra enclosing cages and channels of molecular size. General formula:
$$\text{M}_{x/n}[(\text{AlO}_2)_x(\text{SiO}_2)_y] \cdot z\text{H}_2\text{O}$$- Each Al in the framework carries one negative charge, balanced by exchangeable cations \( \text{M}^{n+} \).
- Löwenstein’s rule: Al–O–Al linkages are avoided, so Si/Al ≥ 1.
- Zeolite A (Si/Al = 1) has the composition Na₁₂[(AlO₂)₁₂(SiO₂)₁₂]·27H₂O.
| Use | Property used |
|---|---|
| Detergent builders, water softening | ion exchange: Na⁺ out, Ca²⁺ and Mg²⁺ in |
| Molecular sieves (drying gases and solvents, separating N₂/O₂, linear/branched alkanes) | uniform pore size |
| Catalytic cracking in refining; ZSM-5 for shape-selective reactions (methanol to gasoline, xylene isomerisation) | acidic H⁺ forms (Brønsted acid sites) plus shape selectivity |
Boron and Aluminium Compounds
| Compound | Use |
|---|---|
| Borax, boric acid | borosilicate glass, glass fibre, enamels, fluxes for welding and soldering, antiseptic, fire retardants, buffer |
| Sodium perborate | oxygen bleach in detergents |
| NaBH₄ | selective reducing agent; bleaching of wood pulp (via dithionite generation) |
| Boron nitride | high-temperature lubricant, crucibles, c-BN abrasives |
| Boron carbide, B₄C | abrasive, armour, neutron absorber (¹⁰B captures neutrons) in nuclear reactors |
| Alumina, Al₂O₃ | Bayer process: bauxite digested in hot NaOH, Al(OH)₃ precipitated and calcined; feed for aluminium metal, catalyst supports, abrasives (corundum) |
| Aluminium metal | Hall–Héroult: Al₂O₃ dissolved in molten cryolite (Na₃AlF₆), electrolysed with carbon anodes (which are consumed as CO₂) |
| Alums, Al₂(SO₄)₃ | coagulants in water treatment (Al(OH)₃ flocs), paper sizing, mordants |
| AlCl₃ | Friedel–Crafts catalyst |
| Alkylaluminiums (AlEt₃) | co-catalyst in Ziegler–Natta polymerisation of alkenes |
Halogens and Noble Gases
| Compound | Production | Use |
|---|---|---|
| F₂ | electrolysis of KF dissolved in anhydrous HF (KF·2HF melt) | UF₆ for uranium enrichment, SF₆, fluoropolymers |
| HF | \( \text{CaF}_2 + \text{H}_2\text{SO}_4 \rightarrow \text{CaSO}_4 + 2\text{HF} \) (fluorspar) | fluorocarbons, PTFE, cryolite and AlF₃ for aluminium, glass etching |
| Br₂ | oxidation of bromide in brines with Cl₂ (\( \text{Cl}_2 + 2\text{Br}^- \rightarrow 2\text{Cl}^- + \text{Br}_2 \)) | flame retardants, drilling fluids (CaBr₂), pharmaceuticals |
| I₂ | from brines or as a by-product of nitrate deposits (iodate reduced to iodine) | antiseptics, iodised salt (as KI or KIO₃), X-ray contrast media, catalysts |
| ClO₂ | reduction of NaClO₃ on site | elemental-chlorine-free pulp bleaching, water treatment |
| Noble gases | fractional distillation of liquid air (He from natural gas) | He: cryogenics (superconducting magnets), balloons, breathing mixtures; Ar: inert atmosphere for welding and metallurgy, lamps; Ne: signs; Xe: lamps, anaesthesia; XeF₂ as a fluorinating agent |
Carbon and Sulfur Compounds
- Activated carbon: adsorbent for water purification, gas masks, decolourising sugar solutions.
- Carbon black: reinforcing filler for rubber tyres, pigment.
- Graphite: electrodes (steel arc furnaces, aluminium smelting), lubricants, battery anodes.
- Synthesis gas (CO + H₂): methanol synthesis, Fischer–Tropsch fuels, hydroformylation.
- CS₂: viscose rayon and cellophane manufacture.
- Sulfur: vulcanisation of rubber (sulfur cross-links between polymer chains), fungicides, H₂SO₄.
- Sodium thiosulfate: photographic fixer, dechlorination of water.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Haber catalyst: promoted Fe | Ostwald: Pt–Rh gauze; contact: V₂O₅ | |
| SO₃ absorbed in H₂SO₄ (oleum) | SO₃ in water: acid mist | |
| Solvay makes Na₂CO₃, not K₂CO₃ | KHCO₃ too soluble to precipitate | |
| Wet-process H₃PO₄ (impure, fertiliser) | thermal-process H₃PO₄ via P₄ (pure, food grade) | |
| Single superphosphate (with CaSO₄) | triple superphosphate (no gypsum dilution) | |
| Bayer process: purifies alumina | Hall–Héroult: electrolyses alumina to Al | |
| Membrane cell: Na⁺-selective membrane | mercury cell: Na amalgam | |
| Anthraquinone process: H₂O₂ | Raschig process: N₂H₄ | |
| Zeolites: crystalline, uniform pores | silica gel: amorphous, broad pore distribution |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Name the catalyst used in the contact process.
- What is the main by-product of the Solvay process?
- In the membrane chlor-alkali cell, which ion crosses the membrane?
Answers
- V₂O₅ (vanadium(V) oxide, promoted with K₂SO₄).
- CaCl₂.
- Na⁺, from the anode compartment to the cathode compartment.
Level 2: Part B Style
Practice Q1. In the Haber process, the role of Al₂O₃ in the iron catalyst is mainly to:
(a) increase the equilibrium constant (b) act as a structural promoter preventing sintering of the iron (c) oxidise N₂ (d) absorb ammonia
Answer: (b)
Al₂O₃ keeps the iron crystallites small and stable (structural promoter); K₂O is the electronic promoter. No catalyst or promoter changes an equilibrium constant.
Practice Q2. Which statement about the contact process is incorrect?
(a) SO₂ is oxidised to SO₃ over V₂O₅. (b) SO₃ is absorbed in concentrated H₂SO₄ to give oleum. (c) Very high pressures (several hundred bar) are used to drive the equilibrium. (d) The reaction 2SO₂ + O₂ → 2SO₃ is exothermic.
Answer: (c)
The contact process runs near 1–2 bar: conversion is already high at moderate temperature with the catalyst and double absorption, so high-pressure plant is not worth the cost. (a), (b) and (d) are correct.
Practice Q3. In the Ostwald process the platinum–rhodium catalyst is essential because:
(a) without it NH₃ does not react with O₂ at all (b) it makes NO the main product instead of N₂, which is thermodynamically favoured (c) it converts NO directly to HNO₃ (d) it lowers the enthalpy of reaction
Answer: (b)
NH₃ burns in O₂ to N₂ and H₂O without a catalyst. The Pt–Rh gauze with millisecond contact times gives NO selectively. Catalysts never change \( \Delta H \).
Practice Q4. A zeolite has the framework composition [(AlO₂)₁₂(SiO₂)₁₂]. The number of monovalent cations needed per formula unit for charge balance is:
(a) 6 (b) 12 (c) 24 (d) 0
Answer: (b) 12
Each AlO₂ unit in the framework carries a charge of −1 (Al³⁺ with two O²⁻ shared: \( 3 - 4 = -1 \)); SiO₂ units are neutral. 12 Al → −12, balanced by 12 Na⁺: this is zeolite A, Na₁₂[(AlO₂)₁₂(SiO₂)₁₂]·27H₂O.
Level 3: Part C Style
Practice Q5. A chlor-alkali membrane cell runs at 1.00 × 10⁵ A for 24.0 h with 95.0 % current efficiency. Which pair (mass of Cl₂, mass of NaOH) is closest to the daily production? (F = 96 485 C mol⁻¹; Cl₂ = 70.90, NaOH = 40.00 g mol⁻¹)
(a) 3.02 t Cl₂, 3.40 t NaOH (b) 3.17 t Cl₂, 3.58 t NaOH (c) 6.03 t Cl₂, 3.40 t NaOH (d) 1.51 t Cl₂, 1.70 t NaOH
Answer: (a)
Charge used \( = 1.00 \times 10^5 \times 24.0 \times 3600 \times 0.950 = 8.208 \times 10^9 \) C.
Moles of electrons \( = 8.208 \times 10^9/96\,485 = 8.507 \times 10^4 \) mol.
- Cl₂: 2 e⁻ per molecule → \( 4.254 \times 10^4 \) mol × 70.90 g = \( 3.02 \times 10^6 \) g = 3.02 t.
- NaOH: 1 e⁻ per OH⁻ → \( 8.507 \times 10^4 \) mol × 40.00 g = 3.40 t.
(b) ignores the current efficiency; (c) forgets that Cl₂ needs 2 electrons; (d) halves both.
Practice Q6. In a contact plant, 1.00 t of sulfur is converted to H₂SO₄ with an overall efficiency of 96.0 %. The mass of 98.0 % (by mass) sulfuric acid produced is closest to: (S = 32.06, H₂SO₄ = 98.08 g mol⁻¹)
(a) 2.94 t (b) 3.00 t (c) 3.06 t (d) 2.88 t
Answer: (b) 3.00 t
Moles S \( = 1.00 \times 10^6/32.06 = 3.119 \times 10^4 \) mol. Each S gives one H₂SO₄.
Pure H₂SO₄ \( = 3.119 \times 10^4 \times 0.960 \times 98.08 = 2.937 \times 10^6 \) g = 2.94 t.
As 98.0 % acid: \( 2.937/0.980 = 3.00 \) t.
(a) is pure H₂SO₄ (forgets the 98 % dilution); (c) is 100 % efficiency as pure acid (3.06 t); (d) applies the 0.98 factor the wrong way (2.94 × 0.98).
Practice Q7. Consider the following statements about industrial main group chemistry:
- In the Solvay process, 1.00 t of NaCl used with 75 % efficiency gives about 0.68 t of Na₂CO₃.
- Pure Ca(H₂PO₄)₂ corresponds to about 60.6 % “P₂O₅”.
- One gram of hydrated zeolite A, Na₁₂[(AlO₂)₁₂(SiO₂)₁₂]·27H₂O (M about 2191 g mol⁻¹), can take up at most about 2.7 mmol of Ca²⁺ by complete exchange.
- In the anthraquinone process the anthraquinone is consumed and must be replaced each cycle.
Which are correct? (NaCl = 58.44, Na₂CO₃ = 105.99, Ca(H₂PO₄)₂ = 234.05, P₂O₅ = 141.94 g mol⁻¹)
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. \( 10^6/58.44 = 1.711 \times 10^4 \) mol NaCl; × 0.75 = \( 1.283 \times 10^4 \) mol; ÷ 2 = \( 6.42 \times 10^3 \) mol Na₂CO₃ × 105.99 = \( 6.80 \times 10^5 \) g = 0.68 t.
- Correct. One Ca(H₂PO₄)₂ contains 2 P, equivalent to one P₂O₅: \( 141.94/234.05 = 60.6 \) %.
- Correct. 12 Na⁺ exchange for 6 Ca²⁺ per formula unit: \( 6/2191 = 2.74 \times 10^{-3} \) mol g⁻¹ = 2.7 mmol g⁻¹ (about 110 mg Ca²⁺ per g).
- Wrong. The anthraquinone is a recycled hydrogen carrier; the net reaction is H₂ + O₂ → H₂O₂.
Quick Revision Table
| Process / material | Key facts |
|---|---|
| Haber–Bosch | N₂ + 3H₂ ⇌ 2NH₃, ΔH° ≈ −92 kJ; promoted Fe (K₂O, Al₂O₃); 400–500 °C, 150–300 bar; N₂ dissociation rate-limiting |
| Urea | NH₃ + CO₂ → ammonium carbamate → urea |
| Ostwald | NH₃ → NO (Pt–Rh, ms contact) → NO₂ → HNO₃; NO recycled; 68 % azeotrope |
| Contact | V₂O₅, 400–450 °C, 1–2 bar; ΔH° ≈ −197 kJ; SO₃ into H₂SO₄ (oleum); double absorption |
| Chlor-alkali | 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂; membrane (Na⁺), diaphragm, mercury cells; Cl₂ by O₂ overpotential |
| Solvay | NaHCO₃ precipitates; NH₃ recycled; net CaCO₃ + 2NaCl → Na₂CO₃ + CaCl₂; not for K₂CO₃ |
| H₂O₂ | anthraquinone autoxidation; Pd hydrogenation; net H₂ + O₂ |
| H₃PO₄ | wet (rock + H₂SO₄, gypsum) or thermal (via P₄) |
| Fertilisers | SSP Ca(H₂PO₄)₂ + CaSO₄; TSP Ca(H₂PO₄)₂; MAP/DAP; grade as % P₂O₅ |
| Silicon | arc furnace (metallurgical), Siemens SiHCl₃ (electronic) |
| Zeolites | M\(_{x/n}\)[(AlO₂)ₓ(SiO₂)ᵧ]·zH₂O; one charge per Al; Löwenstein; ion exchange, sieves, cracking (ZSM-5) |
| Aluminium | Bayer (NaOH digestion of bauxite) + Hall–Héroult (Al₂O₃ in cryolite) |
| Fluorine | F₂ from KF·2HF electrolysis; HF from CaF₂ + H₂SO₄; UF₆ |
Key Takeaways
What’s Next
- Main Group Elements: Quick Revision: every structure, process and trap from the chapter on one page.
- Back to the beginning of the chapter: Allotropy of Main Group Elements.
- Everyday chemistry of the same materials, Part A level: Chemistry of Everyday Materials.
- Ratio and percentage drills for process calculations: Numerical Ability.
- Chapter overview: Main Group Elements and their Compounds.