Rotational Spectra of Diatomic Molecules
CSIR NET chemistry: rigid rotor levels, microwave selection rules, bond lengths from B, isotope shifts, centrifugal distortion, line intensities and Jmax.
- 17 min
On this page · 18 sections
- Prerequisites
- The Hook: A Bond Length from a Ruler
- Where Rotational Spectroscopy Sits
- The Rigid Rotor
- Selection Rules for Pure Rotational Spectra
- The Spectrum: Equally Spaced Lines
- Isotopic Substitution
- Line Intensities and the Most Intense Line
- The Non-Rigid Rotor: Centrifugal Distortion
- Vibration–Rotation Interaction
- Beyond Diatomics: Linear and Symmetric Tops
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- The rigid rotor and spherical harmonics from Orbital and Spin Angular Momentum: the rotational energy is \( \hbar^2 J(J+1)/2I \), with degeneracy \( 2J + 1 \).
- Reduced mass and the harmonic oscillator from Particle in a Box, Harmonic Oscillator and Tunnelling, used again on the next page.
- The Boltzmann factor \( e^{-\Delta E/kT} \), which sets every line intensity on this page.
The Hook: A Bond Length from a Ruler
Where Rotational Spectroscopy Sits
Molecular spectroscopy separates the energy of a molecule into nearly independent pieces (the Born–Oppenheimer separation), each probed in a different region of the spectrum:
| Motion | Typical spacing | Region | Technique |
|---|---|---|---|
| Rotation | about 1–100 cm⁻¹ (for light hydrides up to a few hundred) | microwave, far IR | microwave absorption, rotational Raman |
| Vibration | about 100–4000 cm⁻¹ | infrared | IR absorption, vibrational Raman |
| Electronic | about 10⁴–10⁵ cm⁻¹ | visible, UV | UV-vis absorption, emission |
| Nuclear spin in a field | about 10⁻³–10⁻² cm⁻¹ | radiofrequency | NMR |
| Electron spin in a field | about 0.3 cm⁻¹ (X-band) | microwave | ESR/EPR |
Conversions you will need repeatedly: \( E = hc\tilde\nu \); 1 cm⁻¹ corresponds to 29.98 GHz, 11.96 J mol⁻¹ and \( 1.24 \times 10^{-4} \) eV; at 298 K, \( kT/hc \approx 207 \) cm⁻¹.
The Rigid Rotor
Treat the diatomic as two point masses \( m_1, m_2 \) held at a fixed distance r. Its moment of inertia about the centre of mass is
$$I = \mu r^2, \qquad \mu = \frac{m_1 m_2}{m_1 + m_2}$$Solving the Schrödinger equation for a free rotor gives
$$E_J = \frac{\hbar^2}{2I}J(J+1), \qquad J = 0, 1, 2, \ldots$$Spectroscopists work in wavenumbers, through the rotational term \( F(J) \) and the rotational constant B:
$$\boxed{F(J) = BJ(J+1), \qquad B = \frac{h}{8\pi^2 c I}}$$B has units of cm⁻¹ when c is in cm s⁻¹. A useful working form, with μ in unified atomic mass units and r in ångström:
$$B\ (\text{cm}^{-1}) = \frac{16.858}{\mu\,(\text{u}) \times r^2\,(\text{Å}^2)}$$Each level J is \( (2J + 1) \)-fold degenerate (the \( M_J \) values \( -J, \ldots, +J \)). The levels are not equally spaced: 0, 2B, 6B, 12B, 20B, 30B, … The gap between \( J \) and \( J + 1 \) is \( 2B(J + 1) \), and it grows linearly with J.
Selection Rules for Pure Rotational Spectra
Gross selection rule. A molecule shows a pure rotational (microwave) absorption spectrum only if it has a permanent electric dipole moment. A rotating dipole is an oscillating dipole, and it is that oscillation which couples to the electric field of the radiation.
Specific selection rule. For a linear molecule,
$$\Delta J = \pm 1 \qquad (\Delta M_J = 0, \pm 1)$$The photon carries one unit of angular momentum, so J must change by one. In absorption \( \Delta J = +1 \).
| Molecule | Permanent dipole? | Pure rotational spectrum? |
|---|---|---|
| HCl, CO, NO, HCN, OCS | yes | yes |
| H₂, N₂, O₂, Cl₂ | no (homonuclear) | no |
| CO₂, C₂H₂, CS₂ (linear, centrosymmetric) | no | no |
| H₂O, NH₃, CH₃Cl, O₃ | yes | yes |
| CH₄, SF₆, CCl₄ (spherical tops) | no | no (to a first approximation) |
| Benzene, BF₃ | no | no |
The Spectrum: Equally Spaced Lines
For the transition \( J \to J + 1 \),
$$\boxed{\tilde\nu_{J \to J+1} = F(J+1) - F(J) = 2B(J + 1)}$$So the lines fall at 2B, 4B, 6B, 8B, …, and successive lines are separated by 2B. The first line (\( J = 0 \to 1 \)) is at 2B; there is no line at zero.
graph LR
A["J = 0
F = 0"] -->|"2B"| B["J = 1
F = 2B"]
B -->|"4B"| C["J = 2
F = 6B"]
C -->|"6B"| D["J = 3
F = 12B"]
D -->|"8B"| E["J = 4
F = 20B"]Worked example: CO
For ¹²C¹⁶O, \( B_0 = 1.9225 \) cm⁻¹. The \( J = 0 \to 1 \) line is at \( 2B = 3.845 \) cm⁻¹, which is \( 3.845 \times 29.98 = 115.3 \) GHz. The reduced mass is
$$\mu = \frac{12.000 \times 15.995}{27.995} = 6.856\ \text{u}$$and
$$r = \sqrt{\frac{16.858}{6.856 \times 1.9225}} = 1.131\ \text{Å} = 113\ \text{pm}$$The bond length found from \( B_0 \) is \( r_0 \), an average over the zero-point vibration; it differs slightly from the equilibrium \( r_e \) (see “Vibration–rotation interaction” below).
Recipe: from line positions to bond length
- Take the spacing between consecutive lines: it is 2B.
- Check it against the first line: it should sit at 2B (if not, the first line listed is not \( J = 0 \to 1 \); count back).
- \( I = h/(8\pi^2 cB) \), or use the 16.858 shortcut.
- \( r = \sqrt{I/\mu} \) with the reduced mass of the specific isotopologue.
Isotopic Substitution
The bond length is fixed by the electrons, so isotopic substitution changes only μ:
$$\frac{B'}{B} = \frac{\mu}{\mu'}$$For \( ^{13}\text{C}^{16}\text{O} \), \( \mu = 13.003 \times 15.995/28.998 = 7.172 \) u, so \( B = 1.9225 \times 6.856/7.172 = 1.838 \) cm⁻¹. Every line of the heavier isotopologue sits at about 0.956 times the position of the corresponding ¹²CO line.
Two uses follow:
- Atomic masses from spectra. If r is assumed the same, the measured B ratio gives the mass of the substituted isotope.
- Bond lengths in polyatomics. A linear triatomic such as OCS has two bond lengths but one B; measuring B for two isotopologues gives two equations for the two unknowns.
Deuteration produces the biggest effect: for HCl to DCl, μ goes from 0.980 to 1.904 u, so B is almost halved (10.59 → about 5.45 cm⁻¹).
Line Intensities and the Most Intense Line
A line’s intensity depends mostly on the population of its lower level. Two factors compete: degeneracy \( (2J + 1) \) rises with J, the Boltzmann factor falls:
$$\frac{N_J}{N_0} = (2J + 1)\exp\left[-\frac{hcBJ(J+1)}{kT}\right]$$Setting the derivative with respect to J to zero gives the most populated level:
$$\boxed{J_{\text{max}} = \sqrt{\frac{kT}{2hcB}} - \frac{1}{2}}$$Round to the nearest integer. The spectrum is an envelope that rises, peaks near \( J_{\text{max}} \to J_{\text{max}} + 1 \), and tails off.
| Molecule (B, cm⁻¹) | \( J_{\text{max}} \) at 300 K |
|---|---|
| CO (1.92) | \( \sqrt{208.5/3.84} - 0.5 = 6.9 \to 7 \) |
| HCl (10.59) | \( \sqrt{208.5/21.2} - 0.5 = 2.6 \to 3 \) |
Turned round, the position of the strongest line is a thermometer: \( kT/hc = 2B(J_{\text{max}} + \tfrac{1}{2})^2 \). Planetary and interstellar temperatures are estimated this way.
The Non-Rigid Rotor: Centrifugal Distortion
A real bond stretches as the molecule spins faster, so I increases and the levels creep down. The correction is
$$F(J) = BJ(J+1) - DJ^2(J+1)^2$$and the lines move to
$$\boxed{\tilde\nu_{J \to J+1} = 2B(J+1) - 4D(J+1)^3}$$The spacing therefore decreases slowly with J. D is always positive and tiny compared with B; for a diatomic it is tied to the vibrational wavenumber \( \tilde\omega \):
$$D = \frac{4B^3}{\tilde\omega^2}$$A stiff bond (large \( \tilde\omega \)) distorts little. This relation lets a careful microwave measurement predict the vibrational frequency without an IR spectrum.
How to extract B and D from data. Divide each line by \( 2(J+1) \): \( \tilde\nu/[2(J+1)] = B - 2D(J+1)^2 \). Plot against \( (J+1)^2 \): the intercept is B, the slope is −2D.
Vibration–Rotation Interaction
The molecule is always vibrating, and the average of \( 1/r^2 \) depends on the vibrational level. Hence each vibrational level has its own rotational constant:
$$B_v = B_e - \alpha_e\left(v + \tfrac{1}{2}\right)$$with \( \alpha_e > 0 \) for ordinary bonds (anharmonic stretching lengthens the average bond in higher v). Microwave spectra are taken almost entirely in v = 0, so they give \( B_0 \) and \( r_0 \). Faint satellite lines from molecules in v = 1 give \( B_1 \), and two values give \( B_e \) and \( \alpha_e \). The IR vibration–rotation spectrum on the next page measures \( B_0 \) and \( B_1 \) directly.
Beyond Diatomics: Linear and Symmetric Tops
Part B likes to check that you can classify a polyatomic quickly.
| Type | Moments of inertia | Energy | Examples |
|---|---|---|---|
| Linear | \( I_a = 0,\ I_b = I_c \) | \( BJ(J+1) \) | HCN, OCS, CO₂ |
| Symmetric top, prolate | \( I_a < I_b = I_c \) | \( BJ(J+1) + (A - B)K^2 \) | CH₃Cl, CH₃CN |
| Symmetric top, oblate | \( I_a = I_b < I_c \) | \( BJ(J+1) + (C - B)K^2 \) | NH₃, BF₃, C₆H₆ |
| Spherical top | \( I_a = I_b = I_c \) | \( BJ(J+1) \) | CH₄, SF₆ |
| Asymmetric top | all different | no closed formula | H₂O, SO₂, O₃ |
Here K (\( |K| \le J \)) is the projection of J on the symmetry axis. For a symmetric top with a dipole along that axis the selection rules are \( \Delta J = \pm 1,\ \Delta K = 0 \), so the K term cancels and the rigid-rotor spectrum is again lines at \( 2B(J+1) \); A or C cannot be measured from the pure rotational spectrum. Centrifugal distortion adds a small K-dependent splitting.
Stark effect
An external electric field splits each J level according to \( |M_J| \). The shifts depend on the permanent dipole moment: for a symmetric top (K ≠ 0) the effect is first order, proportional to \( \mu E \); for a linear molecule it is second order, proportional to \( \mu^2E^2 \). Either way the Stark effect measures dipole moments of gas-phase molecules precisely. It also helps assign lines, because different J give different Stark patterns.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Level energy \( F(J) = BJ(J+1) \) | line position \( 2B(J+1) \) | |
| Line spacing in microwave: 2B | rotational Raman spacing: 4B (next pages) | |
| \( r_0 \) from \( B_0 \) (zero-point averaged) | \( r_e \) from \( B_e = B_0 + \alpha_e/2 \) | |
| Degeneracy \( 2J + 1 \) | number of lines (one per J, degeneracy only weights intensity) | |
| \( J_{\text{max}} \) depends on T and B | line spacing depends on B only | |
| Centrifugal distortion: lines converge slowly | vibration–rotation: different B for each v |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which of H₂, HBr, CO₂ and OCS show a pure rotational absorption spectrum?
- Write the positions of the first three lines of a rigid diatomic rotor in terms of B.
- If the bond length is unchanged, by what factor does B change when μ doubles?
Answers
- HBr and OCS (both have permanent dipoles). H₂ and CO₂ have none.
- 2B, 4B and 6B (transitions 0→1, 1→2, 2→3).
- B halves, because \( B \propto 1/\mu \).
Level 2: Part B Style
Practice Q1. A rigid diatomic shows microwave lines at 3.84, 7.69 and 11.53 cm⁻¹. The \( J = 3 \to 4 \) line is expected near:
(a) 13.4 cm⁻¹ (b) 15.4 cm⁻¹ (c) 19.2 cm⁻¹ (d) 23.1 cm⁻¹
Answer: (b) 15.4 cm⁻¹
The spacing is 3.84 to 3.85 cm⁻¹, so \( 2B \approx 3.845 \) and B ≈ 1.92 cm⁻¹. The first line at 2B confirms it is \( J = 0 \to 1 \). The \( J = 3 \to 4 \) line is at \( 2B \times 4 = 15.38 \) cm⁻¹.
Practice Q2. For ¹²C¹⁶O, B = 1.9225 cm⁻¹. Assuming the same bond length, B for ¹³C¹⁶O (masses 13.003 and 15.995 u) is closest to:
(a) 2.011 cm⁻¹ (b) 1.922 cm⁻¹ (c) 1.838 cm⁻¹ (d) 1.775 cm⁻¹
Answer: (c) 1.838 cm⁻¹
\( \mu(^{12}\text{C}^{16}\text{O}) = 6.856 \) u, \( \mu(^{13}\text{C}^{16}\text{O}) = 7.172 \) u. \( B' = 1.9225 \times 6.856/7.172 = 1.838 \) cm⁻¹. The heavier isotopologue has the smaller B.
Practice Q3. For a diatomic with B = 2.00 cm⁻¹ at 300 K (\( kT/hc = 208.5 \) cm⁻¹), the most populated rotational level is:
(a) J = 3 (b) J = 5 (c) J = 7 (d) J = 10
Answer: (c) J = 7
\( J_{\text{max}} = \sqrt{208.5/(2 \times 2.00)} - 0.5 = \sqrt{52.1} - 0.5 = 7.22 - 0.5 = 6.72 \), which rounds to 7.
Practice Q4. When centrifugal distortion is included, the separation between successive lines in a diatomic microwave spectrum:
(a) is exactly 2B for all J (b) increases slowly with J (c) decreases slowly with J (d) alternates in magnitude between odd and even J
Answer: (c)
\( \tilde\nu = 2B(J+1) - 4D(J+1)^3 \); the cubic term grows with J and D > 0, so lines bunch together at high J. Alternation (d) is a nuclear-spin effect seen in rotational Raman spectra of homonuclear molecules, not in microwave spectra.
Level 3: Part C Style
Practice Q5. The far-IR spectrum of gaseous H³⁵Cl shows lines at 20.68, 41.36, 62.04 and 82.72 cm⁻¹ (treat as rigid; masses H = 1.0078 u, ³⁵Cl = 34.969 u, D = 2.0141 u). Which statements are correct?
- B = 10.34 cm⁻¹.
- The bond length is about 129 pm.
- The first line of D³⁵Cl (same bond length) is near 10.6 cm⁻¹.
- The line at 62.04 cm⁻¹ is the \( J = 3 \to 4 \) transition.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- Spacing 20.68 = 2B, and the first line is also 20.68, so it is \( 0 \to 1 \) and B = 10.34 cm⁻¹. Correct.
- \( \mu = 1.0078 \times 34.969/35.977 = 0.9796 \) u; \( r = \sqrt{16.858/(0.9796 \times 10.34)} = 1.290 \) Å = 129 pm. Correct.
- \( \mu(\text{DCl}) = 2.0141 \times 34.969/36.983 = 1.904 \) u; \( B = 10.34 \times 0.9796/1.904 = 5.32 \) cm⁻¹; first line at 2B = 10.64 cm⁻¹. Correct.
- 62.04 = 6B, the \( J = 2 \to 3 \) line. Wrong.
Practice Q6. For a diatomic hydride, the \( J = 0 \to 1 \) line is at 20.798 cm⁻¹ and the \( J = 9 \to 10 \) line at 205.880 cm⁻¹. Using \( \tilde\nu = 2B(J+1) - 4D(J+1)^3 \), find B and D, and estimate the vibrational wavenumber.
Answer: B ≈ 10.40 cm⁻¹, D ≈ 5.3 × 10⁻⁴ cm⁻¹, ω̃ ≈ 2.9 × 10³ cm⁻¹
Two equations:
- \( J = 0 \): \( 2B - 4D = 20.798 \)
- \( J = 9 \): \( 20B - 4000D = 205.880 \)
Multiply the first by 10: \( 20B - 40D = 207.980 \). Subtract the second: \( 3960D = 2.100 \), so \( D = 5.30 \times 10^{-4} \) cm⁻¹. Then \( B = (20.798 + 4D)/2 = 10.400 \) cm⁻¹.
\( \tilde\omega = \sqrt{4B^3/D} = \sqrt{4 \times 1124.9/5.30 \times 10^{-4}} = \sqrt{8.49 \times 10^6} \approx 2914 \) cm⁻¹, a typical H–Cl stretching wavenumber. The microwave data alone predict the IR band to within a few per cent.
Practice Q7. In the microwave spectrum of a hot gas of a diatomic with B = 1.93 cm⁻¹, the strongest line is the \( J = 10 \to 11 \) transition. Estimate the temperature (\( hc/k = 1.4388 \) cm K). Then state which statement is incorrect:
(a) The temperature is about 610 K. (b) At 300 K the strongest line would move to lower J. (c) Doubling B at the same temperature would move the strongest line to higher J. (d) The line spacing does not depend on temperature.
Answer: (c) is incorrect
\( kT/hc = 2B(J_{\text{max}} + \tfrac{1}{2})^2 = 2 \times 1.93 \times 10.5^2 = 425.6 \) cm⁻¹, so \( T = 425.6 \times 1.4388 \approx 612 \) K. (a) is correct.
(b) Correct: \( J_{\text{max}} \propto \sqrt{T} \). (d) Correct: spacing is 2B. (c) Incorrect: \( J_{\text{max}} \propto 1/\sqrt{B} \), so a larger B (wider level spacing) moves the maximum to lower J.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Moment of inertia | \( I = \mu r^2 \), \( \mu = m_1m_2/(m_1 + m_2) \) |
| Rotational constant | \( B = h/8\pi^2cI \); B × μ(u) × r²(Ų) = 16.858 |
| Levels | \( F(J) = BJ(J+1) \), degeneracy \( 2J + 1 \) |
| Gross rule | permanent dipole needed |
| Specific rule | \( \Delta J = \pm 1 \) |
| Lines | \( 2B(J+1) \); spacing 2B; first line 2B |
| Isotopes | \( B \propto 1/\mu \) at fixed r |
| Most populated level | \( J_{\text{max}} = \sqrt{kT/2hcB} - \tfrac{1}{2} \) |
| Centrifugal distortion | lines \( 2B(J+1) - 4D(J+1)^3 \); \( D = 4B^3/\tilde\omega^2 \) |
| Vibration–rotation | \( B_v = B_e - \alpha_e(v + \tfrac{1}{2}) \) |
| Symmetric top | \( BJ(J+1) + (A - B)K^2 \); \( \Delta K = 0 \) so lines still at \( 2B(J+1) \) |
| Inactive in microwave | H₂, N₂, O₂, CO₂, C₂H₂, CH₄, SF₆, C₆H₆ |
| CO numbers | \( B_0 = 1.9225 \) cm⁻¹, first line about 115 GHz, \( r_0 \approx 113 \) pm |
Key Takeaways
What’s Next
- Vibrational Spectra of Diatomic Molecules: harmonic and anharmonic oscillators, overtones, dissociation energies, and the P and R branches that combine vibration with what you learnt here.
- IR and Raman Activity: Selection Rules: the rotational Raman spectrum, \( \Delta J = \pm 2 \), and nuclear-spin intensity alternation.
- Back to the chapter overview or the chapter quick revision.