Skip to content

Olefination, Redox, Aromatic and Coupling Named Reactions

CSIR NET organic chemistry: Wittig, HWE, Peterson, Julia, McMurry, Shapiro, Clemmensen, Wolff–Kishner, Birch, Swern, Vilsmeier, Sandmeyer, Pd couplings.

  • 17 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Turning C=O into C=C
  3. Making Alkenes: the Olefination Family
  4. Named Reductions
  5. Named Oxidations
  6. Named Aromatic Substitutions
  7. Palladium Cross-Coupling: One Cycle, Many Names
  8. Two Phosphine-Driven Substitutions
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Turning C=O into C=C

Making Alkenes: the Olefination Family

Wittig reaction

A phosphonium ylide Ph₃P⁺–C⁻HR (made from Ph₃P + RCH₂X, then base) reacts with an aldehyde or ketone to give an alkene and triphenylphosphine oxide:

$$\text{Ph}_3\text{P}{=}\text{CHR}' + \text{R}_2\text{C}{=}\text{O} \longrightarrow [\text{oxaphosphetane}] \longrightarrow \text{R}_2\text{C}{=}\text{CHR}' + \text{Ph}_3\text{P}{=}\text{O}$$

Under salt-free conditions the ylide and carbonyl combine directly to a four-membered oxaphosphetane, which collapses by syn-elimination (the older betaine picture is now considered less general). The very strong P=O bond is the thermodynamic driving force.

Stereochemistry depends on the ylide:

Ylide typeR′ on the ylide carbonBase neededMajor alkene
Non-stabilisedalkyl, Hstrong: n-BuLi, NaNH₂, NaHMDSZ (kinetic; best under salt-free conditions)
Semi-stabilisedaryl, allylmoderateE/Z mixtures
StabilisedCO₂R, COR, CNweak: NaOEt, Et₃N, even NaOHE (oxaphosphetane formation reversible or late TS)
  • Schlosser modification: a non-stabilised ylide, lithium salts, low temperature, then a second equivalent of PhLi and protonation equilibrates the intermediate, delivering the E-alkene.
  • Stabilised ylides react sluggishly with ketones, and Wittig reagents generally do not olefinate esters.
  • Ph₃P=CHOMe with a ketone gives an enol ether, hydrolysed to an aldehyde with one more carbon: a homologation.

Horner–Wadsworth–Emmons (HWE)

A phosphonate carbanion (EtO)₂P(O)–C⁻H–CO₂Et replaces the stabilised ylide.

  • The phosphonate is made by the Michaelis–Arbuzov reaction: P(OEt)₃ + BrCH₂CO₂Et → (EtO)₂P(O)CH₂CO₂Et + EtBr.
  • The carbanion (NaH, or LiCl/DBU for sensitive substrates) is more nucleophilic than the corresponding stabilised ylide and reacts with ketones as well as aldehydes.
  • The by-product is a water-soluble dialkyl phosphate, removed by aqueous work-up (Ph₃PO from a Wittig needs chromatography).
  • Selectivity: strongly E for α,β-unsaturated esters.
  • Still–Gennari variant: bis(2,2,2-trifluoroethyl) phosphonates with KHMDS and 18-crown-6 at low temperature give the Z-enoate. Electron-withdrawing groups on phosphorus speed up elimination so the kinetic adduct is trapped.

Peterson olefination

An α-silyl carbanion (Me₃SiCH₂Li or Me₃SiCH₂MgCl) adds to a carbonyl to give a β-hydroxysilane, which can be isolated and then eliminated two ways:

ConditionsEliminationConsequence
Acid (H₂SO₄, BF₃)anti (E2-like)one alkene isomer
Base (KH, NaH)syn (via a four-membered Si–O ring, like the oxaphosphetane)the other alkene isomer

So a single diastereomer of the β-hydroxysilane can give either E or Z alkene, depending on whether you choose acid or base. This is the favourite Part C point. If the silyl carbanion carries a stabilising group, elimination is spontaneous and the selectivity is lost.

Julia olefination

  • Julia–Lythgoe: a phenyl sulfone carbanion adds to an aldehyde; the β-alkoxy sulfone is acylated (Ac₂O or BzCl) and then reduced with sodium amalgam (or SmI₂). The radical/anionic elimination gives mainly the E-alkene regardless of the adduct’s stereochemistry.
  • Julia–Kocienski (modified Julia): with a heteroaryl sulfone (benzothiazolyl or 1-phenyltetrazolyl), the alkoxide attacks the heteroaryl ring (a Smiles rearrangement), and SO₂ and the heteroaryl oxide are lost in one pot. Usually E-selective.

Methylenating esters: Tebbe and Petasis

Wittig reagents fail with esters. The Tebbe reagent (a titanium–aluminium methylene complex, Cp₂Ti(μ-Cl)(μ-CH₂)AlMe₂) and the Petasis reagent (Cp₂TiMe₂) deliver a titanium methylidene Cp₂Ti=CH₂, which converts esters into enol ethers and lactones into cyclic enol ethers, through a titanaoxetane. The Ti=O bond formed is the driving force.

McMurry coupling

Two ketones or aldehydes + low-valent titanium (TiCl₃ or TiCl₄ reduced with LiAlH₄, Zn–Cu or Zn) give an alkene by reductive coupling:

$$2\,\text{R}_2\text{C}{=}\text{O} \xrightarrow{\text{TiCl}_4,\ \text{Zn}} \text{R}_2\text{C}{=}\text{CR}_2$$

The reaction passes through a titanium pinacolate (a 1,2-diolate) that is deoxygenated on the titanium surface. It makes highly hindered and symmetrical alkenes (tetraisopropylethylene, stilbenes) and, intramolecularly from dicarbonyls, rings of almost any size.

Shapiro and Bamford–Stevens reactions

Both start from a ketone tosylhydrazone, R₂C=N–NHTs:

ReactionBaseIntermediateAlkene
Shapiro2 equiv alkyllithium (n-BuLi, MeLi), aproticdianion → loss of Ts⁻ and N₂ → vinyllithiumless substituted alkene (kinetic deprotonation at the less hindered α-carbon); the vinyllithium can be trapped with electrophiles (D₂O, CO₂, DMF)
Bamford–StevensNaOMe, NaH, heatdiazo compound → carbene (aprotic) or carbocation (protic)more substituted alkene (thermodynamic), possible rearrangement

Named Reductions

NameReagentBond changeTolerates / limits
ClemmensenZn(Hg), conc. HCl, heatC=O → CH₂for acid-stable, base-sensitive substrates; aryl ketones work best
Wolff–KishnerN₂H₄, KOH (or KOtBu), heatC=O → CH₂for base-stable, acid-sensitive substrates
Huang Minlon modificationN₂H₄·H₂O, KOH, diethylene glycol; distil off water, then ~200 °Csame, one potpractical version of Wolff–Kishner
Meerwein–Ponndorf–Verley (MPV)Al(OiPr)₃, isopropanolC=O → CH–OHchemoselective: C=C, NO₂, esters untouched; reversible
BirchNa or Li, liquid NH₃, ROHarene → cyclohexa-1,4-dienesee below
RosenmundH₂, Pd/BaSO₄ poisoned (quinoline–S)RCOCl → RCHOpoison stops over-reduction to alcohol
LucheNaBH₄, CeCl₃, MeOHenone → allylic alcohol (1,2)suppresses 1,4-reduction

Wolff–Kishner mechanism

The ketone forms a hydrazone. Base removes an N–H proton; the anion is protonated on carbon; a second N–H deprotonation gives an anion that loses N₂ to form a carbanion, which is protonated by solvent. Loss of N₂ makes the last steps irreversible.

MPV reduction and Oppenauer oxidation

Both run through the same six-membered cyclic transition state in which a hydride moves from the isopropoxide carbon (bound to Al) to the coordinated carbonyl carbon. MPV uses excess isopropanol and distils off acetone to drive reduction. The reverse, the Oppenauer oxidation, uses Al(OtBu)₃ or Al(OiPr)₃ with excess acetone (or cyclohexanone) as the hydride acceptor to oxidise a secondary alcohol to a ketone; it is the classic way to oxidise steroidal alcohols, where the Δ⁵ double bond also moves into conjugation (cholesterol → cholest-4-en-3-one).

Birch reduction: the regiochemistry rule

Solvated electrons add to the ring to give a radical anion; protonation by the alcohol, a second electron and a second protonation give the non-conjugated 1,4-diene. Protonation occurs where the charge density is highest.

SubstituentTypeProductPosition of substituent
OMe, alkyl, NR₂electron-donating1-methoxycyclohexa-1,4-diene (from anisole)on a double-bond carbon (unreduced)
CO₂H, CONR₂electron-withdrawingcyclohexa-2,5-diene-1-carboxylic acid (from benzoic acid)on an sp³ (reduced) carbon

The enol ether from anisole hydrolyses in mild aqueous acid to cyclohex-3-enone, and in stronger acid isomerises to the conjugated cyclohex-2-enone. Alkynes are reduced by Na/NH₃ to E-alkenes (contrast Lindlar H₂ → Z).

Named Oxidations

NameReagentTransformationPoint to remember
Swern(COCl)₂, DMSO, −78 °C; then Et₃N1° alcohol → aldehyde; 2° → ketoneno over-oxidation; by-products Me₂S (smell), CO, CO₂
Dess–MartinDess–Martin periodinane (hypervalent iodine)sameneutral, room temperature
OppenauerAl(OtBu)₃, acetone2° alcohol → ketonereverse of MPV
Sharpless asymmetric epoxidationTi(OiPr)₄, diethyl tartrate, t-BuOOHallylic alcohol → epoxy alcoholthe tartrate enantiomer chooses the face; the OH is required
Baeyer–Villigerperacidketone → estera rearrangement: see the next page

Swern mechanism: DMSO + oxalyl chloride → chlorodimethylsulfonium ion (CO and CO₂ lost); the alcohol attacks sulfur to give an alkoxysulfonium ion; Et₃N deprotonates a methyl group to give a sulfonium ylide, which removes the carbinol hydrogen through a five-membered cyclic transition state, releasing Me₂S and the carbonyl compound. The activated DMSO species is stable only at low temperature; if the mixture warms before the base step, Pummerer-type side reactions give methylthiomethyl ethers.

Named Aromatic Substitutions

NameSubstrateReagentsElectrophile / intermediateProduct
Friedel–Crafts alkylationareneRX, AlCl₃carbocation (or complex)alkylarene; rearrangement and polyalkylation possible
Friedel–Crafts acylationarene (not strongly deactivated)RCOCl, AlCl₃ (≥ 1 equiv)acylium ion RC≡O⁺aryl ketone; no rearrangement, no polyacylation
Gattermann–Kochbenzene, alkylbenzenesCO, HCl, AlCl₃, CuClformyl cation equivalentArCHO (not for phenols or phenol ethers)
Gattermannphenols, ethers, activated arenesHCN (or Zn(CN)₂), HCl, Lewis acidiminium, hydrolysedArCHO
Houben–Hoeschpolyhydric phenolsRCN, HCl, ZnCl₂nitrilium / ketiminiumaryl ketone after hydrolysis
Vilsmeier–Haackelectron-rich arenes, heteroarenes (pyrrole, indole, anilines)DMF, POCl₃chloroiminium ion (Vilsmeier reagent)ArCHO after hydrolysis
Reimer–TiemannphenolCHCl₃, NaOHdichlorocarbene :CCl₂o-hydroxybenzaldehyde (salicylaldehyde) mainly
Kolbe–Schmittsodium phenoxideCO₂, pressure, heat; then H⁺CO₂ (weak electrophile)salicylic acid (ortho); potassium phenoxide at higher temperature favours para
SandmeyerArN₂⁺CuCl, CuBr, CuCNaryl radical (single-electron transfer from Cu(I))ArCl, ArBr, ArCN
Balz–SchiemannArN₂⁺ BF₄⁻heataryl cationArF
Ullmannaryl halideCu, heatorganocopperbiaryl Ar–Ar (also Ar–O, Ar–N with Cu catalysis)

Why the ortho preference in Reimer–Tiemann and Kolbe–Schmitt? The phenoxide oxygen and the metal ion hold the incoming electrophile (dichlorocarbene, CO₂) near the ortho carbon. In Kolbe–Schmitt the sodium chelate is the key; with the larger potassium ion and higher temperature, the thermodynamically favoured para isomer forms.

Hunsdiecker reaction (not aromatic substitution, but a frequent partner in questions): a silver carboxylate + Br₂ gives an alkyl bromide with one carbon fewer (RCO₂Ag + Br₂ → RBr + CO₂ + AgBr), by a radical chain through an acyl hypobromite. The Kochi (Pb(OAc)₄, LiCl) and Barton (thiohydroxamate esters) decarboxylations do similar jobs.

Palladium Cross-Coupling: One Cycle, Many Names

All Pd(0)-catalysed couplings of an organic halide R–X (aryl, vinyl; X = I, OTf, Br, Cl in decreasing reactivity) share three steps:

graph LR
    A["Pd(0)L2"] -->|"oxidative addition
of R-X"| B["R-Pd(II)-X"] B -->|"transmetallation
R'-M"| C["R-Pd(II)-R'"] C -->|"reductive elimination
R-R'"| A

The Heck reaction replaces transmetallation by migratory insertion of an alkene and β-hydride elimination; a base regenerates Pd(0) from H–Pd–X.

NamePartner R′–MExtra requirementProduct
Heck (Mizoroki–Heck)alkene (no metal)base (Et₃N, K₂CO₃)substituted alkene, usually E; syn insertion, syn β-H elimination
Suzuki–MiyauraR′B(OH)₂, boronate esterbase (activates boron to a borate)R–R′; non-toxic, air- and water-tolerant boron reagents
StilleR′SnBu₃noneR–R′; tolerant but toxic tin
NegishiR′ZnXnoneR–R′; reactive, sp³ partners possible
Kumada (Kumada–Corriu)R′MgXNi or PdR–R′; Grignard limits functional groups
Sonogashiraterminal alkyneCuI co-catalyst, amine basearyl/vinyl alkyne (copper acetylide transmetallates)
Buchwald–Hartwigamine R₂NHstrong base, bulky phosphinearyl amine (C–N)
Tsuji–Trostsoft nucleophile + allylic acetatePd(0)allylic substitution via η³-allyl Pd

Two Phosphine-Driven Substitutions

  • Mitsunobu reaction: an alcohol + an acidic pronucleophile (carboxylic acid, phenol, imide such as phthalimide, HN₃ source) + PPh₃ + DEAD or DIAD gives the substitution product with inversion at the alcohol carbon. The alcohol oxygen is activated as an alkoxyphosphonium ion and displaced by S_N2. By-products: Ph₃P=O and the hydrazine dicarboxylate. Used to invert secondary alcohols (via the ester, then hydrolysis).
  • Appel reaction: PPh₃ + CCl₄ (or CBr₄) converts an alcohol into the alkyl halide, also with inversion; the driving force is again P=O.

Memory Tricks

Don’t Confuse

ThisvsThat
Wittig: Ph₃P ylide, Ph₃PO by-productHWE: phosphonate anion, water-soluble phosphate, E-selective, reacts with ketones
Peterson: Si, acid anti / base synJulia: sulfone, reductive elimination, E
Shapiro: 2 RLi, vinyllithium, less substituted alkeneBamford–Stevens: NaOMe, carbene/cation, more substituted alkene
Clemmensen: Zn(Hg)/HClWolff–Kishner: N₂H₄/KOH
MPV: Al(OiPr)₃ + iPrOH, reducesOppenauer: Al(OtBu)₃ + acetone, oxidises
Birch of alkyne: E-alkeneLindlar H₂: Z-alkene
Gattermann–Koch: CO/HCl, not phenolsGattermann: HCN/HCl, works on phenols
Sandmeyer: Cu(I) salt, Cl/Br/CNBalz–Schiemann: BF₄⁻, heat, F
Mitsunobu: inversion, PPh₃/DEADSwern: oxidation, DMSO/(COCl)₂

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which reagent converts an ester into a methyl enol ether in one step?
  2. What is the main product of Birch reduction of anisole?
  3. Name the electrophile in the Reimer–Tiemann reaction.
Answers
  1. The Tebbe (or Petasis) reagent: a titanium methylidene equivalent. Wittig reagents do not react with esters.
  2. 1-Methoxycyclohexa-1,4-diene: OMe on a double-bond carbon.
  3. Dichlorocarbene, :CCl₂, formed by α-elimination from CHCl₃ and NaOH.

Level 2: Part B Style

Practice Q1. Propanal reacts with Ph₃P=CHCH₃ (from ethyltriphenylphosphonium bromide and n-BuLi, salt-free) to give mainly:

(a) (E)-pent-2-ene (b) (Z)-pent-2-ene (c) (E)-hex-3-ene (d) (Z)-hex-3-ene

Answer: (b)

Propanal (C₃) + the ethylidene ylide (C₂) gives a C₅ alkene, CH₃CH₂CH=CHCH₃, which is pent-2-ene; the hex-3-ene options add a carbon too many. Ph₃P=CHCH₃ is a non-stabilised ylide, so under salt-free conditions the Z-alkene is the major product.

Practice Q2. A ketone is converted to its tosylhydrazone and treated with 2 equiv n-BuLi, then with D₂O. The product is:

(a) the more substituted alkene with D on the alkene carbon (b) the less substituted alkene with D on the former carbonyl carbon (c) the alkane with CD₂ in place of C=O (d) an α-deuterated ketone

Answer: (b)

Shapiro reaction: the dianion loses Ts⁻ and N₂ to give a vinyllithium in which Li sits on the former carbonyl carbon, with the double bond towards the less substituted α-carbon (kinetic deprotonation). D₂O quenches it to the vinyl deuteride.

Practice Q3. Which method is suitable for converting the aryl ketone 4-(tetrahydropyran-2-yloxy)acetophenone (an acid-labile THP ether, stable to base) into the corresponding ethylbenzene derivative without cleaving the THP group?

(a) Clemmensen reduction (b) Wolff–Kishner (Huang Minlon) reduction (c) MPV reduction (d) Rosenmund reduction

Answer: (b)

A THP ether is an acetal and is cleaved by strong aqueous acid, so Clemmensen (Zn(Hg)/conc. HCl) is unsuitable. Wolff–Kishner converts C=O to CH₂ under strongly basic conditions, which a THP ether survives. MPV stops at the alcohol; Rosenmund reduces acid chlorides.

Practice Q4. In the Sonogashira coupling of iodobenzene with phenylacetylene, the role of CuI is to:

(a) oxidatively add to iodobenzene (b) form a copper acetylide that transmetallates to palladium (c) reduce Pd(II) to Pd(0) only (d) act as the base

Answer: (b)

Copper(I) and the amine base convert the terminal alkyne into a copper acetylide, which transfers the alkynyl group to the aryl–Pd(II) species. Pd does the oxidative addition; the amine is the base.

Level 3: Part C Style

Practice Q5. A single diastereomer of a β-hydroxysilane, R–CH(OH)–CH(SiMe₃)–R′, is divided into two portions. Portion 1 is treated with KH in THF; portion 2 with H₂SO₄ in THF. Portion 1 gives the Z-alkene. Which statements are correct?

  1. Portion 2 gives the E-alkene.
  2. Elimination with KH proceeds through a four-membered ring containing Si and O.
  3. Acid-promoted elimination is anti.
  4. If the β-hydroxysilane were a 1 : 1 mixture of diastereomers, both conditions would give 1 : 1 E/Z mixtures.

(a) 1, 2 and 3 only (b) 1, 2, 3 and 4 (c) 2 and 3 only (d) 1 and 4 only

Answer: (b) 1, 2, 3 and 4

Base: the alkoxide attacks silicon, forming a four-membered Si–O ring, and syn-elimination follows. Acid: protonated OH leaves anti to the silyl group. Syn and anti eliminations from the same diastereomer give opposite geometries, so if KH gives Z, acid gives E. With a 1 : 1 diastereomer mixture each diastereomer gives one geometry under each condition, so both conditions give 1 : 1 E/Z. All four statements are correct.

Practice Q6. Methylenecyclohexane is made from cyclohexanone (C₆H₁₀O) and Ph₃P=CH₂ (C₁₉H₁₇P). Take C = 12.011, H = 1.008, O = 15.999, P = 30.974. Which statements are correct?

  1. The atom economy of the olefination step is about 26%.
  2. About 2.9 g of Ph₃PO is formed per gram of methylenecyclohexane.
  3. Making the same alkene by CH₃MgBr addition followed by acid-catalysed dehydration would give mainly 1-methylcyclohexene instead.
  4. The Wittig reaction places the double bond where the carbonyl oxygen was.

(a) 1, 2, 3 and 4 (b) 3 and 4 only (c) 1 and 2 only (d) 1, 3 and 4 only

Answer: (a) 1, 2, 3 and 4

Molar masses: Ph₃P=CH₂ 276.32; cyclohexanone 98.15; methylenecyclohexane (C₇H₁₂) 96.17; Ph₃PO (C₁₈H₁₅OP) 278.29 g mol⁻¹. Mass balance: 276.32 + 98.15 = 96.17 + 278.29 = 374.47.

$$\text{AE} = \frac{96.17}{374.47} \times 100 = 25.7\%$$

Ph₃PO per gram of product: 278.29/96.17 = 2.89 g. Dehydration of 1-methylcyclohexanol goes via the tertiary cation to the more substituted, endocyclic alkene. The Wittig reaction forms C=C exactly at the former C=O. All four are correct.

Practice Q7. Benzoic acid is reduced with Li in liquid NH₃ containing t-BuOH and the resulting carboxylate is acidified to give X (C₇H₁₀O₂). X is then heated with Pd/C. Which statements are correct?

  1. X is cyclohexa-2,5-diene-1-carboxylic acid.
  2. X contains two isolated C=C bonds and one sp³ ring carbon bearing CO₂H.
  3. The ring carbon bearing CO₂H in X is sp² hybridised.
  4. Heating X with Pd/C can regenerate an aromatic compound by dehydrogenation.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only

An electron-withdrawing carboxylate directs protonation (and so reduction) to C-1 and C-4: the CO₂H ends up on an sp³ carbon, with the two C=C at 2,3 and 5,6. Statement 3 is therefore wrong. Formula check: C₆H₅CO₂H (C₇H₆O₂) + 4 H = C₇H₁₀O₂. Pd/C dehydrogenation re-aromatises the 1,4-diene (to benzoic acid).

Quick Revision Table

ReactionKey reagentKey outcome
WittigPh₃P=CHRnon-stabilised Z; stabilised E; Ph₃PO
HWE / Still–Gennari(RO)₂P(O)CH⁻CO₂RE / Z (CF₃CH₂O groups, KHMDS, 18-crown-6)
PetersonMe₃SiCH₂Liacid anti, base syn
JuliaPhSO₂CH⁻R; Na/HgE-alkene
Tebbe / PetasisTi methylideneester → enol ether
McMurryTiCl₄/Zn2 R₂C=O → R₂C=CR₂
Shapiro / Bamford–StevensTsNHN=CR₂ + RLi / NaOMeless / more substituted alkene
Clemmensen / Wolff–KishnerZn(Hg)–HCl / N₂H₄–KOHC=O → CH₂
MPV / OppenauerAl(OiPr)₃–iPrOH / Al(OtBu)₃–acetonereduction / oxidation, 6-membered TS
BirchNa, NH₃, ROH1,4-diene; EDG on C=C, EWG on sp³ C
SwernDMSO, (COCl)₂, Et₃Nalcohol → aldehyde/ketone
Vilsmeier–HaackDMF, POCl₃ArCHO on electron-rich rings
Reimer–Tiemann / Kolbe–SchmittCHCl₃–NaOH / CO₂ortho-CHO / ortho-CO₂H on phenol
SandmeyerCuX on ArN₂⁺ArCl, ArBr, ArCN
Pd couplingsPd(0), R–X + R′–MOA, TM, RE; Heck uses insertion + β-H elimination
MitsunobuPPh₃, DEAD, HAinversion at carbinol carbon

Key Takeaways

What’s Next