Amino Acids, Peptides and Proteins
CSIR NET natural products: amino acid structure and pI, amino acid synthesis, peptide sequencing (Sanger, Edman, enzymes, CNBr) and SPPS peptide synthesis.
- 18 min
On this page · 15 sections
- Prerequisites
- The Hook: Reading a Chain One Residue at a Time
- Amino Acids: Structure and Stereochemistry
- Acid–Base Behaviour and the Isoelectric Point
- Reactions of Amino Acids
- The Peptide Bond
- Peptide Sequencing
- Peptide Synthesis
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Carbohydrates: the Fischer-projection and D/L conventions are reused for amino acids.
- Protecting Groups: Boc, Fmoc, Cbz, benzyl and tert-butyl groups and their orthogonality.
- Stereogenicity, Chirality and Configuration: CIP rules (why L-cysteine is R).
- For secondary structure, Ramachandran plots and folding, see Protein Structure, Conformation and Stability in Life Sciences.
The Hook: Reading a Chain One Residue at a Time
Amino Acids: Structure and Stereochemistry
The 20 genetically encoded amino acids (plus selenocysteine and pyrrolysine in some organisms) are α-amino acids, H₂N–CHR–COOH. All except glycine (R = H) are chiral.
- Natural protein amino acids are L (Fischer projection with COOH at top: NH₂ on the left).
- In CIP terms almost all L-amino acids are S. L-Cysteine is R, because the CH₂SH group outranks COOH (sulfur beats oxygen at the first point of difference).
- Threonine and isoleucine have a second stereocentre at Cβ: L-threonine is (2S,3R), L-isoleucine is (2S,3S). Their Cβ epimers are allo-threonine and allo-isoleucine.
- Proline is a secondary amine (imino acid) with the side chain cyclised onto nitrogen.
Classification by side chain
| Group | Members |
|---|---|
| Non-polar aliphatic | Gly, Ala, Val, Leu, Ile, Met, Pro |
| Aromatic | Phe, Tyr, Trp (Tyr and Trp absorb near 280 nm) |
| Polar uncharged | Ser, Thr, Cys, Asn, Gln |
| Acidic (negative at pH 7) | Asp, Glu |
| Basic (positive at pH 7) | Lys, Arg, His (His only partly) |
Essential amino acids for humans (cannot be synthesised): His, Ile, Leu, Lys, Met, Phe, Thr, Trp, Val.
Acid–Base Behaviour and the Isoelectric Point
In the solid and in water near neutral pH, amino acids exist as zwitterions, ⁺H₃N–CHR–COO⁻. That explains their high melting (decomposition) points, water solubility and insolubility in non-polar solvents. The α-COOH (pKa about 2) is much more acidic than acetic acid (4.76) because the adjacent NH₃⁺ withdraws electron density; the α-NH₃⁺ (pKa about 9 to 10) is more acidic than a simple ammonium ion for the same reason.
The pI is the pH at which the average net charge is zero. It is the mean of the two pKa values that flank the neutral (zwitterionic) species:
- Neutral side chain: \( \mathrm{pI} = \tfrac{1}{2}(\mathrm{p}K_{a1} + \mathrm{p}K_{a2}) \)
- Acidic side chain: \( \mathrm{pI} = \tfrac{1}{2}(\mathrm{p}K_{\alpha\text{-COOH}} + \mathrm{p}K_{R}) \) (the two lowest)
- Basic side chain: \( \mathrm{pI} = \tfrac{1}{2}(\mathrm{p}K_{R} + \mathrm{p}K_{\alpha\text{-NH}_3^+}) \) (the two highest)
| Amino acid | pKa (α-COOH) | pKa (α-NH₃⁺) | pKa (R) | pI |
|---|---|---|---|---|
| Glycine | 2.34 | 9.60 | — | 5.97 |
| Aspartic acid | 1.88 | 9.60 | 3.65 | 2.77 |
| Glutamic acid | 2.19 | 9.67 | 4.25 | 3.22 |
| Histidine | 1.82 | 9.17 | 6.00 | 7.59 |
| Lysine | 2.18 | 8.95 | 10.53 | 9.74 |
| Arginine | 2.17 | 9.04 | 12.48 | 10.76 |
(Values as tabulated in Lehninger; other compilations differ by 0.1 or so.)
At a pH below the pI the molecule carries a net positive charge and migrates to the cathode in electrophoresis; above the pI it is negative and migrates to the anode. At the pI it does not move, and solubility is lowest (the basis of isoelectric precipitation).
Reactions of Amino Acids
| Reagent | Reacts with | Product and use |
|---|---|---|
| Ninhydrin (heat) | α-amino acids | Ruhemann’s purple (λmax about 570 nm), CO₂ and the aldehyde with one carbon fewer (oxidative deamination–decarboxylation). Proline and hydroxyproline give a yellow product. Quantitative amino acid analysis |
| FDNB (Sanger’s reagent, 1-fluoro-2,4-dinitrobenzene) | free NH₂ (SNAr, mild base) | yellow DNP-amino acid, stable to acid hydrolysis: N-terminal analysis |
| Dansyl chloride | free NH₂ | fluorescent sulfonamide, acid-stable: sensitive N-terminal analysis |
| PITC (phenyl isothiocyanate, Edman’s reagent) | N-terminal NH₂ | phenylthiocarbamoyl peptide → PTH-amino acid (below) |
| HNO₂ (Van Slyke) | primary NH₂ | N₂ gas measured volumetrically; α-hydroxy acid |
| Formaldehyde (Sørensen formol titration) | NH₂ | blocks the amine so the COOH can be titrated with base |
| Alcohol, H⁺ | COOH | ester (protection) |
| Ac₂O, Boc₂O, Fmoc-Cl or Fmoc-OSu | NH₂ | N-protection |
Laboratory synthesis of α-amino acids
| Method | Key steps | Product |
|---|---|---|
| Strecker | RCHO + NH₃ (NH₄Cl) + HCN (KCN) → α-aminonitrile → acid hydrolysis | racemic RCH(NH₂)COOH |
| Gabriel–malonic ester | potassium phthalimide + diethyl bromomalonate → N-phthalimidomalonate; alkylate with RX; hydrolyse, decarboxylate | racemic amino acid (no over-alkylation of N) |
| Acetamidomalonate | diethyl acetamidomalonate + base + RX; acid hydrolysis and decarboxylation | racemic amino acid |
| Amination of α-halo acids | RCH(Br)COOH + large excess NH₃ (Hell–Volhard–Zelinsky gives the α-bromo acid) | racemic amino acid |
| Erlenmeyer azlactone | N-acylglycine (hippuric acid) + ArCHO, Ac₂O, NaOAc → unsaturated azlactone; reduce and hydrolyse | aromatic amino acids (Phe, Tyr) |
| Asymmetric hydrogenation | (Z)-α-acetamidocinnamic acid derivatives, Rh–chiral bisphosphine (for example DIPAMP) | enantio-enriched L-amino acids (L-DOPA process) |
Racemates are resolved with chiral bases or acids (diastereomeric salts) or enzymatically: an acylase hydrolyses only the N-acetyl-L-amino acid, leaving the D-enantiomer acylated (a kinetic resolution).
The Peptide Bond
A peptide (amide) bond joins the α-COOH of one residue to the α-NH₂ of the next. By convention a sequence is written from the N-terminus (left) to the C-terminus (right): Gly-Ala-Phe has free NH₂ on Gly and free COOH on Phe.
- Resonance gives the C–N bond partial double-bond character (about 1.32 Å, between a C–N single bond near 1.47 Å and a C=N double bond near 1.27 Å). The six atoms Cα–C(O)–N(H)–Cα are coplanar and rotation about C–N is restricted.
- The trans arrangement (the two Cα atoms on opposite sides) is strongly preferred. For an X–Pro bond the energy difference is small and cis occurs appreciably; cis–trans isomerisation of prolyl bonds is a slow step in folding.
- Only φ (N–Cα) and ψ (Cα–C) are free to rotate, which is why backbone conformation is described on a Ramachandran plot.
Mass of a peptide: sum of the free amino acid masses minus 18.02 for each peptide bond. For Gly-Ala-Phe: 75.07 + 89.09 + 165.19 − 2(18.02) = 293.31 g mol⁻¹.
Number of sequences: a peptide of n residues drawn from 20 amino acids has \( 20^n \) possible sequences; n different residues used once each give \( n! \) sequences (Gly, Ala, Phe → 6 tripeptides).
Levels of protein structure (brief)
| Level | What it describes | Held by |
|---|---|---|
| Primary | sequence and disulfide positions | covalent bonds |
| Secondary | local backbone conformation (α-helix, β-sheet, turns) | backbone N–H···O=C hydrogen bonds |
| Tertiary | 3D fold of one chain | side-chain interactions, hydrophobic effect, disulfides |
| Quaternary | arrangement of several chains | non-covalent (and sometimes disulfide) contacts |
Denaturation (heat, urea, guanidinium chloride, detergents, extremes of pH) destroys secondary to quaternary structure but not the primary sequence. Anfinsen’s ribonuclease experiment showed that the sequence contains the information for the native fold.
Peptide Sequencing
graph TD
A["Purified peptide"] --> B["Break disulfides:
performic acid (to cysteic acid)
or DTT / 2-mercaptoethanol
then iodoacetate"]
B --> C["Total hydrolysis
6 M HCl, 110 C
amino acid composition"]
B --> D["End-group analysis
N: FDNB, dansyl, Edman
C: carboxypeptidase,
hydrazinolysis"]
B --> E["Specific cleavage
trypsin, chymotrypsin,
CNBr, others"]
E --> F["Sequence each fragment
(Edman)"]
F --> G["Overlap two different
fragment sets
full sequence"]Total hydrolysis and its artefacts
Acid hydrolysis (6 M HCl, about 110 °C, about 24 h, in vacuo) gives the composition, with known losses: Trp is destroyed; Asn and Gln are converted to Asp and Glu (plus NH₄⁺), so they are reported as Asx and Glx; Ser and Thr are partly destroyed. Base hydrolysis preserves Trp but racemises and destroys other residues.
N-terminal analysis
- Sanger (FDNB): SNAr at the N-terminal amine (and at the ε-NH₂ of Lys and the OH of Tyr). Total hydrolysis releases the yellow DNP-amino acid from the N-terminus, but destroys the rest of the chain: one residue per experiment.
- Dansyl chloride: same principle, about 100 times more sensitive (fluorescence).
- Edman degradation:
- PITC adds to the N-terminal NH₂ under mildly basic conditions to give a phenylthiocarbamoyl (PTC) peptide.
- Anhydrous acid (trifluoroacetic acid): the thiocarbonyl sulfur attacks the first peptide carbonyl, releasing the N-terminal residue as an anilinothiazolinone (ATZ) and leaving the shortened peptide intact.
- Aqueous acid converts the ATZ to the more stable phenylthiohydantoin (PTH) amino acid, identified by HPLC.
- Repeat. Each cycle is less than 100% efficient, so the signal decays and out-of-phase residues accumulate; practical runs reach several tens of residues.
C-terminal analysis
- Carboxypeptidase A releases C-terminal residues one at a time (poorly for Arg, Lys and Pro; does not cleave if the penultimate residue is Pro). Carboxypeptidase B releases C-terminal Arg and Lys. Release kinetics (which amino acid appears first) give a short C-terminal sequence.
- Hydrazinolysis (Akabori): anhydrous hydrazine converts every internal residue to an aminoacyl hydrazide; only the C-terminal residue is released as the free amino acid.
Specific cleavage
| Reagent | Cleaves | Notes |
|---|---|---|
| Trypsin | C-terminal side of Lys, Arg | not when the next residue is Pro |
| Chymotrypsin | C-terminal side of Phe, Tyr, Trp (slower after Leu, Met) | not before Pro |
| CNBr | C-terminal side of Met | Met becomes C-terminal homoserine lactone |
| Pepsin | broad; prefers aromatic and hydrophobic residues | active at low pH |
| S. aureus V8 protease (Glu-C) | C-terminal side of Glu (and Asp under some conditions) | |
| Hydroxylamine | Asn–Gly bonds | chemical |
CNBr mechanism: the Met sulfur attacks BrCN (displacing Br⁻) to give a cyanosulfonium ion; the adjacent backbone carbonyl oxygen displaces CH₃SCN intramolecularly to form an iminolactone, which hydrolyses, cutting the chain and leaving a homoserine lactone at the new C-terminus.
Peptide Synthesis
To join residue A (acid component) to residue B (amine component) as A–B, and not as B–A, A–A or B–B, you must:
- Protect the N-terminus of A and the C-terminus of B (and reactive side chains).
- Activate the carboxyl of A.
- Couple, then deprotect selectively to continue.
N-protecting groups (urethanes)
| Group | Installed with | Removed by | Stable to |
|---|---|---|---|
| Boc (tert-butoxycarbonyl) | Boc₂O | TFA (acid; via tert-butyl cation) | base, H₂/Pd |
| Fmoc (9-fluorenylmethoxycarbonyl) | Fmoc-Cl, Fmoc-OSu | piperidine (E1cB via the acidic fluorenyl C9–H; dibenzofulvene released) | acid |
| Cbz or Z (benzyloxycarbonyl) | Cbz-Cl | H₂/Pd-C, HBr/AcOH, Na/NH₃ | mild acid, base |
C-protection: methyl or ethyl esters (saponification), benzyl esters (hydrogenolysis), tert-butyl esters (TFA). Side chains: Lys ε-NH₂ (Boc or Cbz), Ser/Thr/Tyr OH (tBu or Bn ethers), Asp/Glu (tBu or Bn esters), Cys (trityl, Acm), Arg guanidine (Pbf, Tos).
Coupling reagents
- DCC (dicyclohexylcarbodiimide): the carboxylate adds to the carbodiimide to give an O-acylisourea, an activated ester; the amine attacks it, releasing insoluble dicyclohexylurea (DCU). Side reaction: O→N acyl migration to an unreactive N-acylurea. Water-soluble EDC (EDCI) gives a urea removed by aqueous wash.
- Additives HOBt or HOAt trap the O-acylisourea as a benzotriazolyl active ester, which is reactive enough to couple but less prone to racemisation.
- Uronium/phosphonium reagents (HBTU, HATU, PyBOP) generate the same active esters directly.
- Older methods: acid chlorides (racemise easily), mixed anhydrides (isobutyl chloroformate), azides (Curtius-type, low racemisation), p-nitrophenyl and pentafluorophenyl active esters.
Racemisation through the oxazolone
When the acid component is an N-acyl (amide-protected or peptidyl) amino acid, the activated carbonyl can be attacked intramolecularly by the amide oxygen, giving a 5(4H)-oxazolone (azlactone). Its C4–H is acidic (the conjugate base is aromatic-like and well stabilised), so it racemises readily, and the amine then opens the racemised oxazolone.
Solid-phase peptide synthesis (Merrifield)
graph LR
A["Resin-linker
+ first residue
(C-terminal)"] --> B["Deprotect N
TFA (Boc) or
piperidine (Fmoc)"]
B --> C["Couple next
N-protected AA
DCC/HOBt or HBTU"]
C --> D["Wash away
excess reagents"]
D -->|"repeat"| B
D --> E["Final cleavage
HF (Boc/Bzl) or
TFA (Fmoc/tBu)"]- The C-terminal residue is anchored as an ester to a resin (originally chloromethylated polystyrene–divinylbenzene, the “Merrifield resin”; Wang resin for Fmoc work).
- Large excesses of reagents drive each coupling close to completion; purification is filtration and washing. Ninhydrin (Kaiser) tests on resin beads check for unreacted amine.
- Boc/Bzl strategy: TFA removes Boc each cycle; HF cleaves the peptide from the resin and removes benzyl-type side-chain groups (graded acid lability, not true orthogonality).
- Fmoc/tBu strategy: piperidine each cycle; TFA at the end. Truly orthogonal (base versus acid), and avoids HF.
Yield arithmetic. With \( n \) residues there are \( n-1 \) couplings; if each proceeds in yield \( y \), the fraction of full-length chains is \( y^{\,n-1} \). For a 50-mer: \( 0.99^{49} = 0.611 \) (61%), but \( 0.999^{49} = 0.952 \) (95%). Small inefficiencies compound, which is why SPPS uses excess reagents and why deletion sequences are the main impurity.
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| Sanger reagent (FDNB): N-terminal label, destroys chain on hydrolysis | Edman reagent (PITC): removes one residue, leaves chain intact |
| Sanger N-terminal method (proteins) | Sanger dideoxy method (DNA sequencing) |
| Trypsin (after K, R) | Chymotrypsin (after F, Y, W) |
| Carboxypeptidase (enzymatic, C-terminal) | Hydrazinolysis (chemical; only the C-terminal residue is a free acid) |
| Ninhydrin purple (primary α-amino acids) | Ninhydrin yellow (proline, hydroxyproline) |
| DCC (activates COOH; byproduct DCU) | DCU (the urea byproduct, not a reagent) |
| Urethane N-protection (Boc, Fmoc, Cbz): little racemisation | Acyl N-protection (acetyl, benzoyl, peptidyl): oxazolone racemisation |
| Isoelectric point (no net charge, no migration) | pKa (half-dissociation of one group) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper.
Level 1: Foundation
- Which protein amino acid is achiral?
- Name the product formed at the new C-terminus when CNBr cleaves after methionine.
- Which reagent removes an Fmoc group?
Answers
- Glycine.
- Homoserine lactone.
- Piperidine (a secondary amine base, typically 20% in DMF).
Level 2: Part B Style
Practice Q1. Using pKa values 2.18 (α-COOH), 8.95 (α-NH₃⁺) and 10.53 (ε-NH₃⁺), the pI of lysine is
(a) 5.57 (b) 6.36 (c) 9.74 (d) 7.22
Answer: (c)
Basic side chain: average the two highest pKa values, \( (8.95 + 10.53)/2 = 9.74 \). Option (d) averages all three, (a) the lowest two.
Practice Q2. In Edman degradation, the species that is cleaved from the peptide in anhydrous acid and then converted into the identified derivative is
(a) a DNP-amino acid (b) an anilinothiazolinone, converted to a phenylthiohydantoin (c) an oxazolone, converted to a hydantoin (d) an aminoacyl hydrazide
Answer: (b)
The PTC-peptide cyclises in TFA to release the ATZ derivative of the N-terminal residue; aqueous acid rearranges it to the PTH-amino acid. (a) is Sanger’s method; (d) is hydrazinolysis.
Practice Q3. A peptide Ala-Lys-Pro-Gly-Arg-Phe-Met-Trp-Lys-Ser is digested with trypsin. The number of fragments is
(a) 2 (b) 3 (c) 4 (d) 5
Answer: (b)
Lys2 is followed by Pro: no cut. Arg5 → cut. Lys9 → cut. Fragments: Ala-Lys-Pro-Gly-Arg, Phe-Met-Trp-Lys, Ser = 3.
Practice Q4. Coupling Boc-Ala-OH with H-Phe-OMe using DCC gives Boc-Ala-Phe-OMe with insignificant racemisation, whereas coupling Ac-Ala-OH with H-Phe-OMe under the same conditions gives considerable Ac-D-Ala-Phe-OMe. The best explanation is
(a) DCC is chiral (b) the acetamide carbonyl oxygen cyclises onto the activated ester to form an oxazolone whose C4–H is acidic; the Boc carbamate oxygen is less nucleophilic (c) Boc is bulkier and blocks attack of the amine (d) the acetyl group is removed by DCC
Answer: (b)
Oxazolone (azlactone) formation is the main racemisation pathway for N-acyl amino acids; urethane protecting groups suppress it.
Level 3: Part C Style
Practice Q5. An octapeptide P (Ala, Arg, Gly, Leu, Lys, Met, Phe, Tyr) gives these practice data:
- Sanger’s reagent then hydrolysis: DNP-Gly. Carboxypeptidase A: Leu released first.
- Trypsin: Gly-Arg, Met-Phe-Lys, Tyr-Ala-Leu.
- CNBr: Gly-Arg-Hse (lactone) and Phe-Lys-Tyr-Ala-Leu.
Which statements are correct?
- The sequence is Gly-Arg-Met-Phe-Lys-Tyr-Ala-Leu.
- Chymotrypsin (cutting after Phe, Tyr, Trp only) would give three fragments: Gly-Arg-Met-Phe, Lys-Tyr and Ala-Leu.
- Met is residue 3.
- If residue 6 were Pro instead of Tyr, trypsin would give only two fragments.
(a) 1, 2 and 3 only (b) 1, 2, 3 and 4 (c) 1 and 3 only (d) 2 and 4 only
Answer: (b) 1, 2, 3 and 4
- Correct. DNP-Gly fixes the N-terminus; Gly-Arg is the first tryptic fragment; CNBr cuts after Met so Met follows Arg (Gly-Arg-Hse); Phe-Lys-Tyr-Ala-Leu overlaps Met-Phe-Lys and Tyr-Ala-Leu; Leu is C-terminal.
- Correct. Cuts after Phe4 and Tyr6: Gly-Arg-Met-Phe | Lys-Tyr | Ala-Leu.
- Correct.
- Correct. Lys5-Pro6 would not be cleaved; only Arg2 is cut: Gly-Arg and Met-Phe-Lys-Pro-Ala-Leu.
Practice Q6. A 30-residue peptide is made by Fmoc SPPS. Every coupling proceeds in 99.0% yield and every Fmoc removal in 99.5% yield (29 couplings and 29 deprotections are needed after loading the first residue). Which statements are correct?
- The fraction of full-length chains is about \( (0.99 \times 0.995)^{29} \approx 0.65 \).
- Raising every coupling to 99.9% (deprotection unchanged) raises it to about 0.84.
- The main impurities are deletion peptides lacking one residue.
- Final cleavage and side-chain deprotection use anhydrous HF.
(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- \( (0.99 \times 0.995)^{29} = (0.98505)^{29} = 0.646 \). Correct.
- \( (0.999 \times 0.995)^{29} = (0.994005)^{29} = 0.840 \). Correct.
- Correct. A failed coupling (or deprotection) followed by a successful next cycle gives a chain missing one residue.
- Wrong. Fmoc/tBu chemistry ends with TFA; HF is the Boc/Bzl method.
Practice Q7. Which statements about amino acid synthesis are correct?
- Strecker synthesis from 2-methylpropanal, NH₄Cl and KCN, followed by acid hydrolysis, gives racemic valine.
- Alkylation of diethyl acetamidomalonate with benzyl chloride, then hot aqueous acid, gives racemic phenylalanine.
- Acylase treatment of N-acetyl-DL-alanine gives L-alanine and N-acetyl-D-alanine, which can be separated.
- Asymmetric hydrogenation of (Z)-2-acetamidocinnamic acid derivatives with a Rh–chiral bisphosphine catalyst gives a racemic product.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. (CH₃)₂CHCHO supplies the side chain (CH₃)₂CH–: valine.
- Correct. PhCH₂ is attached at the malonate carbon; hydrolysis removes the acetyl and ester groups and decarboxylation gives PhCH₂CH(NH₂)COOH.
- Correct. Enzymatic kinetic resolution: the acylase hydrolyses the L-amide only.
- Wrong. That is the purpose of the chiral catalyst: a high enantiomeric excess of the L-amino acid derivative.
Quick Revision Table
| Idea | Fact |
|---|---|
| Configuration | L = S for all chiral protein amino acids except Cys (R); Thr (2S,3R), Ile (2S,3S) |
| pI | neutral: (pKa1 + pKa2)/2; acidic: two lowest; basic: two highest |
| pI values | Gly 5.97, Asp 2.77, Glu 3.22, His 7.59, Lys 9.74, Arg 10.76 |
| Ninhydrin | Ruhemann’s purple; Pro yellow |
| Synthesis | Strecker; Gabriel–malonate; acetamidomalonate; Erlenmeyer azlactone; Rh asymmetric hydrogenation |
| Peptide bond | planar, trans, C–N about 1.32 Å; X–Pro allows cis |
| N-terminal | FDNB (DNP), dansyl, Edman (PITC → ATZ → PTH) |
| C-terminal | carboxypeptidase A/B; hydrazinolysis |
| Cleavage | trypsin K/R; chymotrypsin F/Y/W; CNBr Met → Hse lactone; none before Pro (enzymes) |
| Hydrolysis artefacts | Trp lost; Asn → Asp, Gln → Glu |
| Protection | Boc/TFA; Fmoc/piperidine; Cbz/H₂–Pd; Bn ester/H₂; tBu/TFA |
| Coupling | DCC → O-acylisourea, DCU; HOBt/HOAt reduce racemisation |
| Racemisation | via 5(4H)-oxazolone of N-acyl residues; urethanes suppress |
| SPPS | C → N on resin; Boc/Bzl (HF) or Fmoc/tBu (TFA); yield \( y^{n-1} \) |
Key Takeaways
What’s Next
- Fatty Acids and Lipids: the third class of primary metabolite, and the acetate (polyketide) logic that reappears in terpenoid biosynthesis.
- Nucleic Acids: solid-phase oligonucleotide synthesis uses the same “protect, couple, cap, repeat” logic as SPPS.
- Linear and Convergent Synthesis: yield arithmetic for long sequences.
- Back to the chapter overview.