Fission and Fusion
CSIR NET chemistry: binding-energy curve, liquid-drop fission barrier, fissile vs fertile, chain reaction, reactors, breeding, fusion and stellar cycles.
- 18 min
On this page · 16 sections
- Prerequisites
- The Hook: Barium Where There Should Be None
- Energy From the Binding-Energy Curve
- Why Heavy Nuclei Split: the Liquid-Drop Picture
- Fissile, Fissionable and Fertile
- Fission Products
- The Chain Reaction
- Fusion
- Fission and Fusion Compared
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Nuclear Stability and Radioactive Decay: the binding-energy curve and the liquid-drop mass formula, which explain why both fission and fusion release energy.
- Nuclear Reactions: Q values from masses, cross-sections, the Coulomb barrier and neutron moderation.
- Redox Chemistry of the Inner Transition Elements: the oxidation states of uranium and plutonium, which matter in fuel reprocessing.
The Hook: Barium Where There Should Be None
Energy From the Binding-Energy Curve
Binding energy per nucleon is about 7.6 MeV for uranium, about 8.5 MeV for medium-mass fission fragments, and 8.8 MeV at its maximum near iron. Light nuclei sit well below the maximum.
- Fission: a nucleus with A ≈ 236 moves from about 7.6 to about 8.5 MeV per nucleon. Release ≈ 236 × 0.9 ≈ 200 MeV per fission.
- Fusion: ²H (1.1 MeV per nucleon) and ³H (about 2.8) combine to ⁴He (7.1). D–T fusion releases 17.6 MeV, only a tenth of a fission event, but per nucleon it is about four times larger (3.5 MeV against 0.85 MeV).
Where the 200 MeV goes
Most of it, roughly four-fifths, appears as the kinetic energy of the two fragments, which the Coulomb repulsion drives apart. That energy is deposited within the fuel as heat. The rest is shared among the prompt neutrons, prompt γ rays, the β particles and γ rays of later fission-product decay, and antineutrinos. The antineutrino energy escapes the reactor entirely, and the fission-product decay energy keeps being released after shutdown (decay heat), which is why reactor cores need cooling even when the chain reaction has stopped.
Energy per gram: complete fission of 1 g of ²³⁵U releases about 8.2 × 10¹⁰ J, close to 1 megawatt-day. A reactor producing 1000 MW of heat therefore fissions about 1 kg of ²³⁵U per day.
Why Heavy Nuclei Split: the Liquid-Drop Picture
Stretch a spherical drop into an ellipsoid at constant volume:
- The surface energy rises (more surface): this resists deformation.
- The Coulomb energy falls (charges further apart): this favours deformation.
For light nuclei surface wins and the sphere is stable. For heavy nuclei the Coulomb term grows as Z²/A^(1/3) against a surface term that grows as A^(2/3), so their ratio is proportional to Z²/A, the fissility parameter. The balance leaves a fission barrier of a few MeV for actinides. When Z²/A reaches roughly 50 the barrier vanishes and the nucleus would split instantly; for uranium Z²/A ≈ 36.
Fissile, Fissionable and Fertile
Neutron capture brings in the neutron’s binding energy (the neutron separation energy of the compound nucleus) plus its kinetic energy. Fission occurs readily if this exceeds the fission barrier.
| Capture | Compound nucleus | Energy brought in by a thermal neutron | Outcome |
|---|---|---|---|
| ²³⁵U + n | ²³⁶U (even–even) | 6.5 MeV | above the barrier: thermal fission |
| ²³⁸U + n | ²³⁹U (even–odd) | 4.8 MeV | below the barrier: mostly (n,γ); fission needs fast neutrons (around 1 MeV or more) |
The difference is the pairing energy: adding an odd neutron to the odd-N nucleus ²³⁵U completes a pair and releases extra binding, while the neutron added to even-N ²³⁸U is unpaired. (Both values above are recomputed from atomic masses.)
| Class | Definition | Examples |
|---|---|---|
| Fissile | fission with thermal neutrons | ²³³U, ²³⁵U, ²³⁹Pu, ²⁴¹Pu (odd N) |
| Fissionable (fast only) | fission only with fast neutrons | ²³⁸U, ²³²Th |
| Fertile | converted to a fissile nuclide by neutron capture and β⁻ decay | ²³⁸U → ²³⁹Pu; ²³²Th → ²³³U |
Of the fissile nuclides only ²³⁵U occurs in nature in usable amounts; natural uranium is mostly ²³⁸U with about 0.7% ²³⁵U.
Fission Products
Asymmetric mass distribution
Thermal fission of ²³⁵U rarely splits the nucleus into two equal halves. The yield-versus-mass curve has two humps, one near A ≈ 95 and one near A ≈ 140, with a deep valley at symmetric division (A ≈ 118). The heavy hump stays near A ≈ 140 for different fissioning nuclides, a consequence of shell effects around the magic numbers N = 82 and Z = 50 in the heavy fragment. Fission induced by high-energy particles becomes more symmetric.
Neutron-rich fragments and decay chains
The fragments inherit the N/Z of uranium (about 1.55), far above the stable ratio for their mass. So:
- Each fragment emits prompt neutrons (on average about 2.4 per thermal fission of ²³⁵U).
- The fragments then decay by a chain of β⁻ emissions along an isobar until they reach stability, for example
Chemically important fission products include ⁹⁰Sr and ¹³⁷Cs (long-lived heat and radiation sources in waste), ¹³¹I (volatile, concentrates in the thyroid), ⁹⁹Mo (the parent of ⁹⁹ᵐTc) and ¹³⁵Xe (a strong neutron absorber).
Prompt and delayed neutrons
| Prompt neutrons | Delayed neutrons | |
|---|---|---|
| Origin | emitted by the fragments within about 10⁻¹⁴ s | emitted after β⁻ decay of certain fission products (precursors) leaves a daughter excited above its neutron separation energy |
| Timing | effectively instantaneous | seconds to about a minute after fission |
| Share | almost all | under 1% for ²³⁵U |
| Example | — | ⁸⁷Br → (β⁻) ⁸⁷Kr*, which emits a neutron to give ⁸⁶Kr |
| Role | sustain the chain | slow the response of the reactor enough for mechanical control |
Without delayed neutrons the neutron population in a reactor would change on a time scale far too fast for control rods to follow.
The Chain Reaction
Each fission releases more than two neutrons. Define the multiplication factor
$$k = \frac{\text{neutrons in one generation}}{\text{neutrons in the preceding generation}}$$| k | State | Behaviour |
|---|---|---|
| k < 1 | subcritical | chain dies out |
| k = 1 | critical | steady power (a reactor at constant output) |
| k > 1 | supercritical | power rises (startup; an uncontrolled excess is a weapon or an accident) |
Neutrons are lost by leakage through the surface and by non-fission capture. Leakage scales with surface area and production with volume, so there is a critical mass (and critical size) below which k cannot reach 1. Reflectors reduce leakage.
The four-factor formula
For an infinite thermal reactor:
$$\boxed{k_\infty = \eta\,\varepsilon\,p\,f} \qquad k_{\text{eff}} = k_\infty \times P_{\text{non-leakage}}$$| Factor | Name | Meaning |
|---|---|---|
| η | reproduction factor | fast neutrons produced per thermal neutron absorbed in fuel |
| ε | fast-fission factor | extra neutrons from fast fission (mainly ²³⁸U); slightly above 1 |
| p | resonance escape probability | fraction of neutrons that slow down without capture in ²³⁸U resonances |
| f | thermal utilisation | fraction of thermal neutrons absorbed in fuel rather than moderator, coolant, structure |
Enrichment raises η; a better moderator raises p; low-absorption materials raise f.
Reactor components
| Component | Purpose | Materials |
|---|---|---|
| Fuel | fissile material | UO₂ (natural or enriched), MOX (U, Pu oxides) |
| Moderator | slow neutrons to thermal energies by elastic collisions | H₂O, D₂O, graphite |
| Control rods | absorb neutrons to set k | Cd, B (as B₄C), Hf |
| Coolant | carry heat away | H₂O, D₂O, CO₂, liquid Na (fast reactors) |
| Reflector | return leaking neutrons | D₂O, graphite, Be |
| Shielding | absorb radiation | concrete, water, steel |
Breeding
A fast breeder reactor has no moderator. Fast neutrons from ²³⁹Pu fission produce more neutrons per absorption, enough to sustain the chain and also convert fertile ²³⁸U in a blanket into more fuel than is consumed (breeding ratio above 1):
$$^{238}\text{U}(n,\gamma)\,^{239}\text{U} \xrightarrow{\beta^-} {}^{239}\text{Np} \xrightarrow{\beta^-} {}^{239}\text{Pu}$$$$^{232}\text{Th}(n,\gamma)\,^{233}\text{Th} \xrightarrow{\beta^-} {}^{233}\text{Pa} \xrightarrow{\beta^-} {}^{233}\text{U}$$Liquid sodium is the usual coolant because it removes heat well and moderates little. India’s three-stage nuclear programme is built on this sequence: natural-uranium PHWRs, then fast breeders using plutonium, then reactors using ²³³U bred from the country’s large thorium reserves.
Fusion
The reactions
| Reaction | Q (MeV), from atomic masses | Note |
|---|---|---|
| ²H + ³H → ⁴He + n | +17.59 | the easiest to ignite; the neutron takes about 14.1 MeV, the α about 3.5 MeV |
| ²H + ²H → ³He + n | +3.27 | two branches of roughly equal probability |
| ²H + ²H → ³H + ¹H | +4.03 | |
| ²H + ³He → ⁴He + ¹H | +18.35 | products are charged; higher barrier |
| ⁶Li + n → ⁴He + ³H | +4.78 | not fusion, but used to breed tritium in a blanket |
Kinematics: in a two-body break-up the lighter product takes the larger share, in the inverse ratio of masses. For D–T: \( T_n = Q\, m_\alpha/(m_\alpha + m_n) = 17.59 \times 4.00/5.01 \approx 14.1 \) MeV.
Why fusion is hard
Both nuclei are positive. The Coulomb barrier for D + T is a few hundred keV, while thermal energies at 10⁸ K are only about 10 keV. Fusion still occurs because a fraction of nuclei in the high-energy tail of the Maxwell–Boltzmann distribution can tunnel through the barrier. Hence the need for temperatures of the order of 10⁸ K, at which matter is a fully ionised plasma.
For net energy the plasma must also be dense enough and held long enough. The Lawson criterion sets a minimum for the product of ion density n and energy confinement time τ_E (with the temperature in the right range); the combined condition is often expressed as a triple product nτ_E T. Two approaches:
| Approach | How confinement is achieved | Example |
|---|---|---|
| Magnetic confinement | toroidal magnetic fields hold a hot, dilute plasma for seconds or longer | tokamak (ITER) |
| Inertial confinement | lasers or ion beams compress a tiny D–T pellet to enormous density for nanoseconds | laser fusion facilities |
Fusion in stars
The Sun converts hydrogen to helium mainly by the proton–proton chain. Its first step, p + p → d + e⁺ + ν, is a weak-interaction process and extremely slow, which is why the Sun burns steadily for billions of years. The net result is
$$4\,^{1}\text{H} \longrightarrow {}^{4}\text{He} + 2e^{+} + 2\nu_e, \qquad Q \approx 26.7\ \text{MeV}$$(26.7 MeV from atomic masses, which includes the annihilation of the two positrons; the neutrinos carry off a small part.) In stars hotter and more massive than the Sun the CNO cycle dominates: ¹²C acts as a catalyst, capturing four protons through N and O isotopes and returning as ¹²C plus ⁴He. The net reaction and Q are the same. Later stages fuse helium to carbon (triple-α process) and so on up to iron, where the binding-energy curve peaks and fusion stops releasing energy.
Fission and Fusion Compared
| Feature | Fission | Fusion |
|---|---|---|
| Nuclei | heavy (A > 230) split | light (A < 10 in practice) join |
| Energy per event | about 200 MeV | 17.6 MeV (D–T) |
| Energy per nucleon | about 0.85 MeV | about 3.5 MeV (D–T) |
| Energy per gram of fuel | about 8.2 × 10¹⁰ J (²³⁵U) | about 3.4 × 10¹¹ J (D–T mixture), roughly 4 times more |
| Trigger | neutron absorption (no Coulomb barrier) | very high temperature to overcome the Coulomb barrier |
| Chain reaction | yes, through neutrons | no neutron chain; sustained by plasma heating |
| Waste | long-lived fission products and actinides | mainly neutron-activated structure; tritium handling |
| Status | commercial power | experimental (magnetic and inertial) |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Fissile (²³⁵U, thermal fission) | Fertile (²³⁸U, ²³²Th: make fissile fuel) | |
| Moderator: slows neutrons | Control rod: absorbs neutrons | |
| Prompt neutrons (sustain the chain) | Delayed neutrons (make control possible) | |
| Thermal reactor (moderated, ²³⁵U) | Fast breeder (no moderator, ²³⁹Pu, Na coolant) | |
| Q at scission (≈ 170–180 MeV) | Total recoverable per fission (≈ 200 MeV, includes product decay) | |
| pp chain (Sun, weak first step) | CNO cycle (hotter stars, ¹²C catalyst) | |
| Critical (k = 1, steady) | Supercritical (k > 1, rising) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Masses and factors given in a question are data for that question.
Level 1: Foundation
- Which of ²³²Th, ²³⁵U and ²³⁸U is fissile?
- Name the products of D–T fusion.
- Calculate Z²/A for ²³⁵U.
Answers
- ²³⁵U. ²³²Th and ²³⁸U are fertile.
- ⁴He and a neutron (Q ≈ 17.6 MeV).
- 92²/235 = 8464/235 = 36.0.
Level 2: Part B Style
Practice Q1. Using M(²³⁵U) = 235.043930 u, mₙ = 1.008665 u, M(¹⁴¹Ba) = 140.914411 u and M(⁹²Kr) = 91.926156 u, the energy released in ²³⁵U + n → ¹⁴¹Ba + ⁹²Kr + 3n is closest to:
(a) 200 MeV (b) 173 MeV (c) 192 MeV (d) 155 MeV
Answer: (b)
Δm = 236.052595 − 235.866562 = 0.186033 u; Q = 0.186033 × 931.494 = 173 MeV. 200 MeV is the textbook total including later fission-product decay, not this reaction’s Q.
Practice Q2. In ²³⁵U + n → ¹⁴⁰Xe + X + 2n, X is:
(a) ⁹⁴Sr (b) ⁹⁶Sr (c) ⁹⁴Kr (d) ⁹³Rb
Answer: (a)
A: 236 − 140 − 2 = 94; Z: 92 − 54 = 38 (Sr). (b) forgets the two neutrons.
Practice Q3. In D–T fusion (Q = 17.6 MeV, reactants nearly at rest), the kinetic energy carried by the neutron is closest to:
(a) 3.5 MeV (b) 8.8 MeV (c) 14.1 MeV (d) 17.6 MeV
Answer: (c)
Equal and opposite momenta: the lighter particle takes the larger share. T_n = 17.6 × 4.00/(4.00 + 1.01) ≈ 14.1 MeV; the α particle takes 3.5 MeV.
Practice Q4. A thermal reactor lattice has η = 2.02, ε = 1.03, p = 0.87 and f = 0.71. If 80% of neutrons do not leak out, the reactor is:
(a) subcritical, k_eff ≈ 0.89 (b) critical (c) supercritical, k_eff ≈ 1.03 (d) supercritical, k_eff ≈ 1.29
Answer: (c)
k∞ = 2.02 × 1.03 × 0.87 × 0.71 = 1.285. k_eff = 1.285 × 0.80 = 1.03: supercritical. (d) is k∞, forgetting leakage.
Level 3: Part C Style
Practice Q5. A reactor runs at 1000 MW thermal power. Assume 200 MeV per fission, all from ²³⁵U (M = 235 g mol⁻¹). Which statements are correct?
- About 3.1 × 10¹⁹ fissions occur per second.
- About 1.05 kg of ²³⁵U is fissioned per day.
- The ²³⁵U actually consumed per day is larger than the amount fissioned, because some ²³⁵U nuclei capture neutrons without fission.
- The heat output falls to zero the moment the control rods stop the chain reaction.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 200 MeV = 3.204 × 10⁻¹¹ J; 10⁹ J s⁻¹ / 3.204 × 10⁻¹¹ J = 3.12 × 10¹⁹ s⁻¹. Correct.
- Per day: 3.12 × 10¹⁹ × 86 400 = 2.70 × 10²⁴ fissions = 4.48 mol = 1.05 kg. Correct.
- Correct: part of the absorptions in ²³⁵U are (n,γ) giving ²³⁶U, so consumption exceeds fission.
- Wrong: fission-product decay heat continues after shutdown.
Practice Q6. Take the neutron separation energies as 6.5 MeV for ²³⁶U and 4.8 MeV for ²³⁹U, and the fission barriers of both compound nuclei as close to 6 MeV. Which conclusions follow?
- Capture of a thermal neutron by ²³⁵U gives ²³⁶U above its fission barrier.
- ²³⁸U needs neutrons with kinetic energy of the order of 1 MeV or more to fission.
- The difference arises because ²³⁶U is an even–even nucleus, so the captured neutron completes a pair.
- ²³⁸U is therefore useless in a reactor.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 6.5 > 6: correct.
- 4.8 MeV is short of 6 by over 1 MeV, which must come from neutron kinetic energy: correct.
- Pairing energy: correct.
- Wrong: ²³⁸U contributes fast fission (ε) and is the fertile source of ²³⁹Pu.
Practice Q7. Compare complete fission of 1 g of ²³⁵U (200 MeV per fission) with complete D–T fusion of 1 g of an equimolar D–T mixture (17.6 MeV per reaction, molar mass of a D + T pair 5.03 g mol⁻¹). Which statements are correct?
- Fission of 1 g of ²³⁵U releases about 8.2 × 10¹⁰ J.
- Fusion of 1 g of D–T mixture releases about 3.4 × 10¹¹ J.
- Per gram, fusion releases about four times more energy than fission.
- Per reaction event, fusion releases more energy than fission.
(a) 1, 2 and 3 only (b) 3 and 4 only (c) 1, 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- (1/235) × 6.022 × 10²³ × 200 × 1.602 × 10⁻¹³ J = 8.2 × 10¹⁰ J. Correct.
- (1/5.03) × 6.022 × 10²³ × 17.6 × 1.602 × 10⁻¹³ J = 3.4 × 10¹¹ J. Correct.
- 3.4 × 10¹¹ / 8.2 × 10¹⁰ ≈ 4.1. Correct.
- Wrong: 200 MeV per fission against 17.6 MeV per fusion.
Quick Revision Table
| Idea | Fact |
|---|---|
| Energy origin | E_B/A: U ≈ 7.6, fragments ≈ 8.5, Fe 8.8 MeV |
| Fission energy | ≈ 200 MeV total (≈ 80% fragment KE); Q at scission ≈ 170–180 MeV; 1 g ²³⁵U ≈ 8.2 × 10¹⁰ J ≈ 1 MW d |
| Liquid drop | surface resists, Coulomb drives; fissility Z²/A (U ≈ 36; barrier vanishes near 50) |
| Thermal fission | ²³⁵U + n: 6.5 MeV in (even–even ²³⁶U) beats barrier; ²³⁸U + n: 4.8 MeV, needs fast n |
| Classes | fissile ²³³U, ²³⁵U, ²³⁹Pu, ²⁴¹Pu; fertile ²³⁸U, ²³²Th |
| Products | double hump at A ≈ 95 and 140; neutron-rich, β⁻ chains; ⁹⁰Sr, ¹³⁷Cs, ¹³¹I, ¹³⁵Xe |
| Neutrons | ≈ 2.4 prompt per fission (²³⁵U, thermal); delayed < 1%, e.g. ⁸⁷Br precursor |
| Chain | k < 1, = 1, > 1; k∞ = ηεpf; k_eff = k∞ × non-leakage |
| Reactor parts | moderator H₂O/D₂O/C; rods Cd/B; coolant H₂O/D₂O/CO₂/Na |
| Breeding | ²³⁸U → ²³⁹Pu; ²³²Th → ²³³Th → ²³³Pa → ²³³U |
| Fusion Q | D–T 17.59 (n 14.1, α 3.5); D–D 3.27 / 4.03; D–³He 18.35; ⁶Li(n,α)T 4.78 |
| Conditions | ≈ 10⁸ K plasma; Lawson nτ_E; magnetic (tokamak) or inertial (laser) |
| Stars | pp chain 4¹H → ⁴He + 2e⁺ + 2ν, 26.7 MeV; CNO cycle in hotter stars |
Key Takeaways
What’s Next
- Radio-analytical Techniques: detecting and using the radionuclides that reactors and accelerators make.
- Activation Analysis: the reactor as an analytical tool.
- Revisit Q values and moderation: Nuclear Reactions.
- Chapter overview: Nuclear Chemistry.