Nuclear Reactions
CSIR NET chemistry: reaction notation, Q value and threshold, Coulomb barrier, compound nucleus, cross-sections, moderation and radionuclide production.
- 18 min
On this page · 17 sections
- Prerequisites
- The Hook: Rutherford’s Long-Range Protons
- Writing a Nuclear Reaction
- The Q Value
- Why Neutrons Are the Best Projectiles: the Coulomb Barrier
- How Reactions Proceed: Compound Nucleus and Direct Reactions
- Types of Nuclear Reactions
- Reaction Cross-Section
- Neutron Sources and Moderation
- Making Radionuclides
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Nuclear Stability and Radioactive Decay: atomic masses, mass defect, 931.494 MeV u⁻¹ and the decay law. Every Q value on this page uses them.
- One-Dimensional Problems: Oscillator and Tunnelling: barrier penetration, which lets charged particles react below the classical Coulomb barrier.
- Inner Transition Elements: the actinides, the elements that neutron capture and heavy-ion reactions build.
The Hook: Rutherford’s Long-Range Protons
Writing a Nuclear Reaction
A reaction in which projectile a hits target X to give product Y and light particle b is written in full or in the compact (Bethe) notation:
$$\text{X} + a \longrightarrow \text{Y} + b \qquad\equiv\qquad \text{X}(a, b)\text{Y}$$So Rutherford’s reaction is ¹⁴N(α,p)¹⁷O. Common light particles: n, p, d (²H), t (³H), α (⁴He), γ, e⁻, e⁺.
What is conserved
| Quantity | Conserved? | Use |
|---|---|---|
| Total charge (sum of Z) | yes | find the missing Z |
| Total nucleon number (sum of A) | yes | find the missing A |
| Total energy (rest mass + kinetic) | yes | Q value |
| Linear momentum | yes | threshold energy, recoil |
| Angular momentum and parity | yes | selection of states (beyond most exam questions) |
| Rest mass alone | no | the difference is Q |
| Number of protons alone, or neutrons alone | not in weak processes; yes in purely strong reactions | — |
The Q Value
The Q value is the energy released, equal to the decrease in rest mass:
$$\boxed{Q = \left[(M_X + M_a) - (M_Y + M_b)\right] \times 931.494\ \text{MeV u}^{-1}}$$Atomic masses can be used directly whenever the total Z is the same on both sides (it always is), because the electrons cancel. Equivalently, Q equals the gain in kinetic energy: \( Q = (T_Y + T_b) - (T_X + T_a) \).
| Q | Name | Meaning |
|---|---|---|
| Q > 0 | exoergic (exothermic) | releases energy; can occur even with very slow projectiles if no barrier stops it |
| Q < 0 | endoergic (endothermic) | needs kinetic energy above a threshold |
Threshold energy
For an endoergic reaction it is not enough to supply |Q|. Momentum must be conserved, so the products must still move together after the collision, and that kinetic energy of the centre of mass is not available for the reaction. Non-relativistically, for a target at rest:
$$\boxed{E_{\text{th}} = -Q\left(1 + \frac{m_a}{m_X}\right)}$$For ¹⁴N(α,p)¹⁷O: \( E_{\text{th}} = 1.19 \times (1 + 4.0026/14.0031) \) = 1.53 MeV.
The heavier the projectile relative to the target, the larger the correction. For neutrons on a heavy target the threshold is barely above |Q|.
Q values worth knowing
| Reaction | Q (MeV), from atomic masses | Historical or practical note |
|---|---|---|
| ⁹Be(α,n)¹²C | +5.70 | Chadwick’s neutron (1932); Am–Be and Ra–Be neutron sources |
| ⁷Li(p,α)⁴He | +17.35 | Cockcroft and Walton, first accelerator-induced reaction |
| ²⁷Al(α,n)³⁰P | −2.64 | Irène Joliot-Curie and Frédéric Joliot, first artificial radioactivity; ³⁰P is a β⁺ emitter |
| ¹⁴N(α,p)¹⁷O | −1.19 | Rutherford, first transmutation |
| ⁶Li(n,α)³H | +4.78 | tritium production; neutron detection |
| ¹H(n,γ)²H | +2.22 | equals the deuteron binding energy |
Why Neutrons Are the Best Projectiles: the Coulomb Barrier
A positive projectile must approach the target against electrostatic repulsion. The barrier height, with the two nuclei touching at \( R = r_0(A_1^{1/3} + A_2^{1/3}) \), is
$$V_C = \frac{Z_1 Z_2 e^2}{4\pi\varepsilon_0 R} \approx \frac{1.44\, Z_1 Z_2}{R/\text{fm}}\ \text{MeV}$$For α + ¹⁴N with r₀ = 1.2 fm, R ≈ 4.8 fm and V_C ≈ 4.2 MeV. For α + ²³⁸U it is close to 28 MeV. Quantum tunnelling allows some reaction below V_C, but the probability falls very fast as the energy drops.
Consequences:
- Neutrons feel no Coulomb barrier, so even thermal neutrons (about 0.025 eV) react readily, mostly by (n,γ) capture. This is why reactors are such efficient isotope factories.
- Charged particles (p, d, α, heavy ions) need accelerators (cyclotrons, linear accelerators) and the barrier rises with the target’s Z.
- Fusion of light nuclei is only practical at very high temperatures for the same reason, as covered in Fission and Fusion.
How Reactions Proceed: Compound Nucleus and Direct Reactions
The compound nucleus (Bohr)
At low to moderate energies the projectile is absorbed and its energy is shared among all the nucleons, forming an excited compound nucleus C*:
$$\text{X} + a \longrightarrow \text{C}^{*} \longrightarrow \text{Y} + b$$C* lives far longer than the time a projectile takes to cross a nucleus (that transit time is of the order of 10⁻²² s), long enough to “forget” how it was formed. This is the independence hypothesis: the way C* decays (by emitting n, p, α or γ) depends only on its energy, angular momentum and parity, not on how it was made. Emission from C* is roughly isotropic in the centre-of-mass frame, like evaporation from a hot drop.
Direct reactions
At higher projectile energies, or for loosely bound projectiles, the reaction can happen in one quick step at the nuclear surface, on the transit time scale, with no compound nucleus:
- Stripping: (d,p), the deuteron leaves its neutron in the target.
- Pickup: (p,d), the proton picks up a neutron from the target.
- Knock-out and inelastic scattering to collective states.
Products of direct reactions are strongly forward-peaked, the experimental signature that separates them from compound-nucleus evaporation.
| Feature | Compound nucleus | Direct reaction |
|---|---|---|
| Time scale | long compared with transit time | about one transit time |
| Memory of entrance channel | lost (independence) | kept |
| Angular distribution | roughly isotropic (CM frame) | forward-peaked |
| Energy range | low to moderate; resonances at low energy | higher energies, surface reactions |
| Examples | (n,γ), (α,n) at low energy | (d,p) stripping, (p,d) pickup |
Types of Nuclear Reactions
| Type | Example | Notes |
|---|---|---|
| Elastic scattering | (n,n) | no change of state; basis of neutron moderation |
| Inelastic scattering | (n,n′) | target left excited, then emits γ |
| Radiative capture | ⁵⁹Co(n,γ)⁶⁰Co; ²³Na(n,γ)²⁴Na | the dominant thermal-neutron reaction; same element, so product is not carrier-free |
| (n,p) | ³²S(n,p)³²P; ¹⁴N(n,p)¹⁴C | product is a different element, so it can be separated carrier-free; ¹⁴N(n,p)¹⁴C makes radiocarbon in the atmosphere |
| (n,α) | ¹⁰B(n,α)⁷Li; ⁶Li(n,α)³H | large thermal cross-sections; neutron detectors, control rods, boron neutron capture therapy |
| (p,n) | ¹⁸O(p,n)¹⁸F | cyclotron production of the PET isotope ¹⁸F |
| (d,n), (d,p) | ²H(d,n)³He; stripping | neutron generators; spectroscopy of nuclear levels |
| (α,n) | ⁹Be(α,n)¹²C | portable neutron sources |
| Photonuclear | (γ,n) | needs γ energy above the neutron separation energy |
| Spallation | high-energy p on a heavy target | many nucleons chipped off; intense neutron sources |
| Fission | ²³⁵U(n,f) | see Fission and Fusion |
| Fusion / heavy-ion | light + light, or heavy ion + actinide | energy production; synthesis of transactinide elements |
Reaction Cross-Section
The probability of a reaction is expressed as an effective target area, the cross-section σ:
$$1\ \text{barn (b)} = 10^{-24}\ \text{cm}^2 = 10^{-28}\ \text{m}^2$$For a thin target of N nuclei in a uniform neutron flux φ (neutrons cm⁻² s⁻¹):
$$\boxed{R = N\,\sigma\,\varphi} \qquad (\text{reactions per second})$$Keep the units consistent: σ in cm² with φ in cm⁻² s⁻¹.
How σ depends on energy
| Region | Behaviour | Reason |
|---|---|---|
| Thermal and slow neutrons | σ ∝ 1/v, i.e. ∝ \( E^{-1/2} \) | time spent near the nucleus is proportional to 1/v |
| Epithermal (eV to keV) | sharp resonances | the compound nucleus has discrete levels; σ peaks when the excitation matches a level (Breit–Wigner shape) |
| Fast (MeV) | smoother, of the order of the geometric area | many overlapping levels; threshold reactions such as (n,p) and (n,2n) open |
Thermal neutrons are defined by the energy \( kT \) at about 293 K: E ≈ 0.025 eV, most probable speed about 2200 m s⁻¹. Cross-sections are tabulated at this reference energy.
Some thermal (n,γ) cross-sections are enormous (¹¹³Cd, ¹⁵⁷Gd, ¹³⁵Xe), which is why cadmium and boron make control rods and why the fission product ¹³⁵Xe “poisons” a reactor. Nuclides with magic neutron numbers have very small capture cross-sections.
Neutron Sources and Moderation
| Source | Reaction | Neutron energy |
|---|---|---|
| Nuclear reactor | fission of ²³⁵U | fission spectrum (average about 2 MeV), moderated to thermal |
| Isotopic (α,n) source | ⁹Be(α,n)¹²C with ²⁴¹Am or ²²⁶Ra | a few MeV, broad spectrum |
| Spontaneous-fission source | ²⁵²Cf | fission spectrum |
| Neutron generator | ³H(d,n)⁴He (D–T) | about 14 MeV, nearly monoenergetic |
| Spallation source | GeV protons on a heavy-metal target | very intense, broad |
Fast neutrons are slowed by elastic collisions with light nuclei. In a head-on collision with a nucleus of mass number A, the largest possible fractional energy loss is
$$\left(\frac{\Delta E}{E}\right)_{\max} = 1 - \left(\frac{A-1}{A+1}\right)^2$$which is 100% for ¹H, 89% for ²H and only 28% for ¹²C. The average logarithmic energy loss per collision, ξ, is 1.00 for H, about 0.725 for D and about 0.158 for C, so taking a 2 MeV neutron to 0.025 eV needs about ln(8 × 10⁷)/ξ collisions: roughly 18 in hydrogen, 25 in deuterium and 115 in carbon. Hydrogen moderates best per collision but also absorbs neutrons; heavy water absorbs far fewer, so it can be used with natural uranium.
Making Radionuclides
The production route decides the decay mode and the specific activity of the product.
| Route | Products | Typical decay | Specific activity | Examples |
|---|---|---|---|---|
| Reactor (n,γ) | neutron-rich isotope of the same element | β⁻ | limited by the stable target (not carrier-free) | ⁶⁰Co, ²⁴Na, ¹⁹⁸Au, ⁹⁹Mo |
| Reactor (n,p), (n,α) | neutron-rich isotope of a different element | β⁻ | carrier-free after chemical separation | ³²P from ³²S, ¹⁴C from ¹⁴N, ³H from ⁶Li |
| Reactor, fission products | neutron-rich mid-mass nuclides | β⁻ | carrier-free after separation | ⁹⁹Mo, ¹³¹I, ¹³⁷Cs, ⁹⁰Sr |
| Cyclotron (p,n), (d,n), (α,xn) | proton-rich isotopes | β⁺ or EC | carrier-free | ¹⁸F, ¹¹C, ¹³N, ¹⁵O, ⁶⁷Ga, ¹¹¹In, ²⁰¹Tl |
| Generators | short-lived daughter of a longer-lived parent | various | carrier-free | ⁹⁹ᵐTc from ⁹⁹Mo, ⁶⁸Ga from ⁶⁸Ge |
The general rule: reactors make neutron-rich (β⁻) nuclides, cyclotrons make proton-rich (β⁺, EC) nuclides.
The Szilard–Chalmers effect gives a way round the low specific activity of (n,γ) products: the recoil from γ emission breaks the chemical bond, so the radioactive atoms end up in a different chemical form from the bulk target and can be separated. It is described with the other tracer techniques in Radio-analytical Techniques.
Synthesis of transuranium elements
Neutron capture followed by β⁻ decay climbs the periodic table, because each β⁻ raises Z by one:
$$^{238}\text{U}(n,\gamma)\,^{239}\text{U} \xrightarrow{\beta^-,\ \approx 23\ \text{min}} {}^{239}\text{Np} \xrightarrow{\beta^-,\ \approx 2.4\ \text{d}} {}^{239}\text{Pu}$$This is how ²³⁹Pu is made in reactors and how the first transuranium elements were reached. Repeated captures in high-flux reactors build up curium, californium and beyond, but the chain stops near fermium because the nuclides become too short-lived. The heavier elements are made one atom at a time by heavy-ion fusion, for example light ions (C, O, Ne) or medium-mass ions on actinide or lead/bismuth targets, followed by neutron evaporation.
The same logic filled gaps in the lighter periodic table: technetium (Z = 43), which has no stable isotope, was first identified in molybdenum bombarded with deuterons.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Q value: energy released (rest-mass difference) | Threshold energy: minimum projectile KE, larger than −Q | |
| Coulomb barrier (charged particles) | Threshold (energy balance, any projectile) | |
| Compound nucleus: isotropic, independent of formation | Direct reaction: forward-peaked, one step | |
| ³²S(n,p)³²P: carrier-free | ³¹P(n,γ)³²P: diluted by stable ³¹P | |
| 1/v region (smooth, thermal) | Resonance region (sharp peaks, eV–keV) | |
| Moderator: slows neutrons (H₂O, D₂O, graphite) | Absorber: removes neutrons (Cd, B) | |
| Stripping (d,p) | Pickup (p,d) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Masses and cross-sections given in a question are data for that question.
Level 1: Foundation
- Identify X: ⁹Be + ⁴He → ¹²C + X.
- Express 1 barn in m².
- Is a reactor or a cyclotron the natural source of ¹⁸F?
Answers
- A: 9 + 4 − 12 = 1; Z: 4 + 2 − 6 = 0. X is a neutron.
- 10⁻²⁸ m² (10⁻²⁴ cm²).
- A cyclotron: ¹⁸F is proton-rich (a β⁺ emitter), made by ¹⁸O(p,n)¹⁸F.
Level 2: Part B Style
Practice Q1. Using M(²⁷Al) = 26.981538 u, M(⁴He) = 4.002603 u, mₙ = 1.008665 u and M(³⁰P) = 29.978314 u, the Q value of ²⁷Al(α,n)³⁰P is:
(a) +2.64 MeV (b) −2.64 MeV (c) −3.04 MeV (d) −1.19 MeV
Answer: (b)
Reactants 30.984141 u; products 30.986979 u; Δm = −0.002838 u; Q = −0.002838 × 931.494 = −2.64 MeV. Option (c) is the threshold energy (next question), a deliberate distractor.
Practice Q2. For the reaction in Q1, the threshold kinetic energy of the α particle (target at rest) is closest to:
(a) 2.64 MeV (b) 3.04 MeV (c) 2.28 MeV (d) 5.28 MeV
Answer: (b)
E_th = 2.64 × (1 + 4.0026/26.9815) = 2.64 × 1.148 = 3.04 MeV.
Practice Q3. Which reaction gives a product that can be obtained carrier-free by chemical separation from the target?
(a) ³¹P(n,γ)³²P (b) ⁵⁹Co(n,γ)⁶⁰Co (c) ³²S(n,p)³²P (d) ²³Na(n,γ)²⁴Na
Answer: (c)
Only in (c) does the product (P) differ from the target element (S), so phosphorus can be separated chemically with no stable phosphorus added. The (n,γ) products are isotopes of the target element.
Practice Q4. A 0.100 g gold foil (M = 196.97 g mol⁻¹, single isotope) is placed in a thermal flux of 1.0 × 10¹² n cm⁻² s⁻¹. Take σ = 98.7 b. The capture rate is closest to:
(a) 3.0 × 10¹⁰ s⁻¹ (b) 3.0 × 10⁶ s⁻¹ (c) 3.0 × 10¹⁴ s⁻¹ (d) 9.9 × 10¹⁰ s⁻¹
Answer: (a)
N = 3.06 × 10²⁰; R = Nσφ = 3.06 × 10²⁰ × 9.87 × 10⁻²³ cm² × 10¹² cm⁻² s⁻¹ = 3.0 × 10¹⁰ s⁻¹. Using σ in m² with the flux in cm⁻² gives (b), off by 10⁴.
Level 3: Part C Style
Practice Q5. A nucleus has a thermal (0.025 eV) capture cross-section of 40 b and follows the 1/v law up to 1 eV. Which statements are correct?
- Its cross-section at 0.10 eV is 20 b.
- Its cross-section at 0.0025 eV is about 126 b.
- At 0.10 eV the capture rate per target nucleus, for the same neutron density, is the same as at 0.025 eV.
- At 0.10 eV the neutrons move at about 4400 m s⁻¹.
(a) 1 and 4 only (b) 1, 2 and 4 only (c) 1, 2, 3 and 4 (d) 2 and 3 only
Answer: (c) 1, 2, 3 and 4
σ ∝ E^(−1/2).
- Energy × 4 gives σ ÷ 2: 20 b. Correct.
- Energy ÷ 10 gives σ × √10 = 40 × 3.16 = 126 b. Correct.
- Rate per nucleus = nvσ (n = neutron density). Under the 1/v law vσ is constant, so the rate is independent of speed. Correct, and this is why 1/v absorbers are good neutron-density monitors.
- v ∝ √E: 2200 × √4 = 4400 m s⁻¹. Correct.
Practice Q6. The compound nucleus ⁶⁴Zn* is formed (i) from p + ⁶³Cu and (ii) from α + ⁶⁰Ni at the same excitation energy. Which statements are correct?
- The ratio of ⁶³Zn to ⁶²Zn produced should be about the same in (i) and (ii).
- Product particles from (ii) should be strongly forward-peaked because the α particle is heavier.
- Taking the formation Q values as +7.7 MeV for p + ⁶³Cu → ⁶⁴Zn and +4.0 MeV for α + ⁶⁰Ni → ⁶⁴Zn, route (ii) needs about 3.7 MeV more centre-of-mass kinetic energy than route (i) to reach the same excitation energy.
- The result tests Bohr’s independence hypothesis.
(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 3 and 4 only
- Correct: by the independence hypothesis the decay channels depend only on the state of ⁶⁴Zn*.
- Wrong: compound-nucleus emission is roughly isotropic in the CM frame. Forward peaking is the mark of direct reactions.
- Correct: excitation energy = Q(formation) + CM kinetic energy. Equal excitation needs CM energies differing by 7.7 − 4.0 = 3.7 MeV, the α route needing more (and its Coulomb barrier, Z₁Z₂ = 56 against 29, is also higher).
- Correct: this is Ghoshal’s experiment.
Practice Q7. Uranium-238 in a reactor is converted to ²³⁹Pu. Which sequence and statements are correct?
- ²³⁸U(n,γ)²³⁹U, then two successive β⁻ decays.
- The intermediate after the first β⁻ decay is ²³⁹Np.
- The mass number changes in each β⁻ step.
- The overall change from ²³⁸U to ²³⁹Pu is ΔZ = +2, ΔA = +1.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
Capture adds one nucleon (A 238 → 239, Z unchanged). β⁻ raises Z: U (92) → Np (93) → Pu (94), with A fixed at 239 (statement 3 wrong). Net: ΔZ = +2, ΔA = +1.
Quick Revision Table
| Idea | Fact |
|---|---|
| Notation | X(a,b)Y; conserve A, Z, energy, momentum |
| Q value | [(M_X + M_a) − (M_Y + M_b)] × 931.494 MeV; atomic masses fine |
| Threshold | E_th = −Q(1 + m_a/m_X) for target at rest |
| Classic Q values | ⁹Be(α,n) +5.70; ⁷Li(p,α) +17.35; ²⁷Al(α,n) −2.64; ¹⁴N(α,p) −1.19 MeV |
| Coulomb barrier | ≈ 1.44 Z₁Z₂/R MeV (R in fm); α + ¹⁴N ≈ 4.2 MeV |
| Compound nucleus | Bohr; independence hypothesis; isotropic; Ghoshal (⁶⁴Zn*) |
| Direct | stripping (d,p), pickup (p,d); forward-peaked |
| Cross-section | 1 b = 10⁻²⁴ cm²; R = Nσφ |
| Energy dependence | 1/v (thermal) → resonances (eV–keV) → smooth (MeV) |
| Thermal neutrons | ≈ 0.025 eV, ≈ 2200 m s⁻¹ |
| Moderation | max loss 1 − ((A−1)/(A+1))²: H 100%, D 89%, C 28%; ξ: H 1, D 0.725, C 0.158 |
| Production | reactor → β⁻ (neutron-rich); cyclotron → β⁺/EC (proton-rich); (n,p)/(n,α)/fission → carrier-free |
| Transuranium | ²³⁸U(n,γ)²³⁹U → ²³⁹Np → ²³⁹Pu (two β⁻); heaviest elements by heavy-ion fusion |
Key Takeaways
What’s Next
- Fission and Fusion: the two most important nuclear reactions, from the binding-energy curve to reactors and stars.
- Activation Analysis: turning R = Nσφ into an analytical method.
- Back to the basics of decay: Nuclear Stability and Radioactive Decay.
- Chapter overview: Nuclear Chemistry.