Skip to content

Chemo-, Regio- and Stereoselective Transformations

CSIR NET organic selectivity: chemoselective reagents, Markovnikov vs anti, epoxide opening, kinetic vs thermodynamic enolates, 1,2 vs 1,4, directed reactions.

  • 18 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: A Steroid With Four Targets
  3. Definitions and the Physical Basis
  4. Chemoselectivity
  5. Regioselectivity
  6. Stereoselectivity in Transformations
  7. Worked Example: Planning a Selective Sequence
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: A Steroid With Four Targets

Definitions and the Physical Basis

Three kinds of selectivity
  • Chemoselectivity: preferential reaction of one functional group over another (or others) present in the same molecule or mixture.
  • Regioselectivity: preferential bond formation or cleavage at one of two or more possible positions within a functional group (Markovnikov versus anti-Markovnikov; 1,2 versus 1,4; one α-carbon versus the other).
  • Stereoselectivity: preferential formation of one stereoisomer (diastereo- or enantioselectivity). The definitions, and how stereoselective differs from stereospecific, are on the stereochemistry page.

All three are ratios of rates under kinetic control:

$$\frac{[\text{P}_1]}{[\text{P}_2]} = \frac{k_1}{k_2} = e^{\Delta\Delta G^\ddagger/RT}$$

At 298 K, a factor of 10 corresponds to about 5.7 kJ mol⁻¹. Under thermodynamic control (reversible formation of the products), the ratio reflects the product stabilities instead, \( e^{-\Delta G^\circ/RT} \). Many selectivity switches (kinetic versus thermodynamic enolates, 1,2 versus 1,4 addition to dienes, endo versus exo) are switches between these two regimes, made by changing temperature, time, counter-ion or base strength.

Measuring chemoselectivity: the competition experiment

Mix equimolar A and B with a deficit of reagent. If both react by pseudo-first-order kinetics in the same pot, the remaining fractions obey

$$\frac{k_A}{k_B} = \frac{\ln([A]/[A]_0)}{\ln([B]/[B]_0)}$$

This is independent of how the reagent concentration changes during the run, because both substrates experience the same reagent at every moment. It is the standard way to get relative rates of fast reactions.

Chemoselectivity

What controls it

Control elementIdeaExamples
Intrinsic electrophilicitythe more electrophilic group reacts first with a nucleophilealdehyde > ketone > ester > amide toward NaBH₄
Intrinsic nucleophilicity / electron densitythe more electron-rich group reacts first with an electrophilemCPBA picks the most substituted C=C; amines acylate before alcohols
Reagent tuningelectron-withdrawing ligands or steric bulk attenuate a reagentNaBH₃CN and NaBH(OAc)₃ reduce iminium ions, not ketones
Reagent polarityelectrophilic versus nucleophilic reagents reverse the orderBH₃ reduces acids before esters; LiAlH₄/NaBH₄ the opposite
Temperature and stoichiometrystop after the first, faster stepDIBAL (1 equiv, −78 °C): ester → aldehyde
Coordination / directiona nearby group binds the reagentVO(acac)₂ epoxidises only the allylic C=C; MnO₂ only allylic/benzylic OH
Masking in situone group is reversibly tied upLuche: aldehydes form methoxy hemiacetal/acetal species in MeOH/CeCl₃, so the ketone is reduced
Protecting groupstemporarily remove a group from competitionacetal on a ketone during ester reduction with LiAlH₄

Classic chemoselective pairs

Substrate pair (same molecule)ReagentReactsSurvives
Ketone + esterNaBH₄ketoneester
Aldehyde + ketoneNaBH(OAc)₃; NaBH₄ at low temperaturealdehydeketone
Ketone + aldehydeNaBH₄/CeCl₃ in MeOH (Luche)ketonealdehyde (as an acetal, released on work-up)
Carboxylic acid + esterBH₃·THFacidester
Ester + carboxylic acidLiBH₄esteracid (as carboxylate)
Ester + amideLiBH₄esteramide
Ketone + iminium (reductive amination)NaBH₃CN, pH 6–7iminiumketone
Allylic alcohol + saturated alcoholMnO₂allylicsaturated
Primary + secondary alcoholTEMPO/NaOClprimarysecondary
Alkyne + alkeneH₂, Lindlaralkyne (to Z-alkene)alkene
Conjugated C=C + C=OH₂, Pd/CC=CC=O
Monosubstituted + trisubstituted C=CWilkinson’s catalyst; 9-BBNmonosubstitutedtrisubstituted
Electron-rich C=C + enone C=CmCPBAelectron-richenone
Enone C=C + isolated C=CH₂O₂, NaOHenoneisolated
Allylic C=C + isolated C=C (in an allylic alcohol)VO(acac)₂, tBuOOHallylicisolated
Amine + alcoholAc₂O (no DMAP), 1 equivamine (amide)alcohol
Aryl iodide + aryl chloridePd(0), Suzuki partnerAr–IAr–Cl (for a later coupling)
Ketone + ester (C–C bond)Reformatsky reagent (BrZnCH₂CO₂Et)ketoneester

Regioselectivity

Additions to alkenes and alkynes

ReactionRegiochemistryOrigin
HX, H₃O⁺Markovnikov (H to the less substituted carbon)more stable carbocation; rearrangements possible
Oxymercuration–demercurationMarkovnikov, no rearrangementbridged mercurinium ion opened at the more substituted carbon
Halohydrin formation (Br₂, H₂O or NBS, H₂O)OH at the more substituted carbon, Br at the less; antibromonium opened by water where positive charge is better stabilised
HBr + peroxidesanti-MarkovnikovBr• adds to give the more stable radical
Hydroboration–oxidationanti-Markovnikov, synB to the less hindered carbon (steric and electronic); 9-BBN, disiamylborane and thexylborane are more selective than BH₃
Wacker oxidationMarkovnikov: terminal alkene → methyl ketonenucleopalladation at the more substituted carbon
Hg²⁺-catalysed alkyne hydrationMarkovnikov: terminal alkyne → methyl ketone
Hydroboration of a terminal alkyneanti-Markovnikov: aldehyde
Hydroformylationlinear (n) or branched (iso) aldehydeset by the ligand (bulky phosphines and phosphites favour linear)
Heck reactionaryl to the less substituted alkene carbonsteric control of insertion
Diels–Alder, unsymmetrical partners“ortho” and “para” productslargest HOMO and LUMO coefficients overlap

Epoxide opening

ConditionsSite of attack on an unsymmetrical epoxideCharacter
Basic or neutral, strong nucleophile (RO⁻, CN⁻, N₃⁻, RMgX, LiAlH₄, R₂CuLi)less substituted carbonSN2: steric control; inversion
Acidic (H₃O⁺, ROH/H⁺, HX)more substituted carbon (tertiary or benzylic)borderline SN2 with a loose, cation-like transition state: electronic control; still inversion
Lewis acid with a weak nucleophileusually more substitutedsimilar to acid
Ti(OiPr)₄-mediated opening of 2,3-epoxy alcoholsusually C3chelation of the epoxy alcohol to Ti

Cyclohexene oxides open to give trans-diaxial products first (the Fürst–Plattner rule): the nucleophile approaches along the axial direction so that the transition state is chair-like. In a conformationally locked epoxide this decides which carbon is attacked, even against steric bias.

Enolates: which α-carbon?

ConditionsEnolate formed from 2-methylcyclohexanoneControl
LDA (or LiHMDS), THF, −78 °C, ketone added to excess baseless substituted (Δ¹,⁶): deprotonation at C6 (CH₂)kinetic: the less hindered proton is removed faster; irreversible
Weaker base or excess ketone, higher temperature, protic solvent, K⁺ or Na⁺ counter-ion (e.g. KOtBu/tBuOH, NaH with catalytic ketone)more substituted (Δ¹,²): deprotonation at C2 (CH)thermodynamic: equilibration via proton exchange; more substituted enolate C=C is more stable
Et₃N, TMSCl, DMF, heat (House conditions)more substituted silyl enol etherthermodynamic
LDA, TMSCl, −78 °Cless substituted silyl enol etherkinetic
Li/NH₃ reduction of an enonespecific enolate at the former α-carbonregiospecific generation

Other regiochemical choices for enolates:

  • C- versus O-alkylation: soft electrophiles (alkyl iodides) alkylate carbon; hard electrophiles (TMSCl, acyl chlorides, Me₂SO₄ in HMPA) favour oxygen.
  • Enones (α′ versus γ): LDA at −78 °C removes the α′-proton (cross-conjugated enolate, kinetic); equilibrating conditions give the extended dienolate by γ-deprotonation, which is nevertheless alkylated mainly at α (deconjugative alkylation).

Conjugated systems

Reagent classPreferred site on an α,β-unsaturated carbonylExamples
Hard, reactive, irreversible nucleophiles1,2 (carbonyl carbon)RLi, RMgX (mostly), LiAlH₄, Luche (NaBH₄/CeCl₃)
Soft or stabilised nucleophiles; reversible additions1,4 (β-carbon)R₂CuLi, RMgX/CuI, enolates of malonates (Michael), thiols, amines, Sakurai allylsilanes, L-Selectride (some substrates)
Electrophile on a conjugated diene (HBr on buta-1,3-diene)1,2-adduct at low temperature (kinetic); 1,4-adduct on warming (thermodynamic)the allylic cation is attacked fastest at the carbon next to where H added; the 1,4-adduct has the more substituted alkene

Elimination and rearrangement

  • Zaitsev (more substituted alkene): small bases (EtO⁻, HO⁻), good leaving groups, E1.
  • Hofmann (less substituted alkene): bulky bases (KOtBu, LDA), poor or charged leaving groups (NMe₃⁺ in Hofmann elimination, F), syn eliminations (Cope, Chugaev) where the more numerous or accessible β-H wins.
  • Baeyer–Villiger: oxygen inserts next to the group best able to carry positive charge.
  • Birch reduction: donors stay on the C=C, acceptors end up on the sp³ carbon.
  • Directed ortho-metalation (DoM): coordinating groups (CONR₂, OMe, OCONEt₂, NHBoc) direct n-BuLi or s-BuLi to the adjacent ortho position, overriding the normal electrophilic substitution pattern described on the aromatic substitution page.

Stereoselectivity in Transformations

The models are developed on the stereochemistry pages; here is the transformation-centred summary.

TransformationControlling featureOutcome
Hydride reduction of a substituted cyclohexanonereagent sizesmall (LiAlH₄, NaBH₄): axial attack → equatorial OH; bulky (L-Selectride): equatorial attack → axial OH
Nucleophilic addition to an α-chiral aldehydeFelkin–Anh (non-chelating) vs chelation (α-OR with Mg²⁺, Zn²⁺, Ti⁴⁺)opposite diastereomers
Reduction of a β-hydroxy ketoneEt₂BOMe then NaBH₄ (Narasaka–Prasad, intermolecular hydride on a boron chelate) vs Me₄NBH(OAc)₃ (Evans–Saksena, intramolecular delivery)syn-1,3-diol vs anti-1,3-diol
Epoxidation of a cyclic allylic alcoholmCPBA (Henbest, H-bonding) or VO(acac)₂/TBHP (coordination)epoxide cis to OH
Cyclopropanation of an allylic alcoholSimmons–Smith; Zn coordinates to OHcyclopropane cis to OH
Hydrogenation of a cyclic homoallylic or allylic alcoholCrabtree’s catalyst (Ir binds OH)H₂ delivered cis to OH
Hydrogenation, heterogeneousadsorption on the less hindered faceH₂ syn, from the less hindered face
Hydroborationapproach from the less hindered face, syne.g. α-pinene: borane adds anti to the gem-dimethyl bridge
Alkylation of a cyclohexanone enolatestereoelectronics: axial approach through a chair-like TSelectrophile enters axially, then the ring may flip
Enolate alkylation adjacent to a stereocentreapproach anti to the larger neighbouring grouptrans-2,3-disubstitution after conjugate addition–alkylation
Aldol of a preformed enolateZimmerman–Traxler chairZ-enolate → syn; E-enolate → anti
Iodolactonisation (I₂, NaHCO₃) of a γ,δ-unsaturated acidanti addition through an iodonium ioniodide and lactone oxygen trans; kinetic (short time) vs thermodynamic (longer, reversible) diastereomers
Diels–Alderendo ruleendo adduct under kinetic control
Alkyne reductionLindlar vs Na/NH₃ vs Red-AlZ vs E vs E (allylic alcohol)
Enantioselective oxidations and reductionschiral catalysts: Sharpless AE and AD, Jacobsen, CBS, Noyori, enzymesone enantiomer; see asymmetric induction
graph TD
    Q["Substrate with
several reactive sites"] --> C{"Which functional
group?"} C -->|"intrinsic reactivity,
reagent tuning,
direction, protection"| CH["Chemoselective step"] CH --> R{"Which position
in that group?"} R -->|"cation/radical stability,
sterics, hard/soft,
kinetic vs thermodynamic"| RE["Regioselective step"] RE --> S{"Which face or
stereoisomer?"} S -->|"existing stereocentres,
chelation, direction,
chiral catalyst or enzyme"| ST["Stereoselective step"]

Worked Example: Planning a Selective Sequence

Task. Methyl 4-oxocyclohex-2-ene-1-carboxylate carries an ester at C1, an enone C=C at C2–C3 and a ketone at C4. Convert it (i) into the allylic alcohol with the ester intact, (ii) into the saturated ketone, and see what the other common choices do.

GoalChoiceReason
Allylic alcohol, ester untouchedNaBH₄/CeCl₃·7H₂O, MeOH, 0 °CLuche: 1,2 regioselectivity; borohydride ignores the ester (chemoselectivity)
Saturated ketone, ester untouchedH₂, Pd/C (1 equiv) or L-Selectride (1,4)C=C conjugated to C=O is hydrogenated before the ketone; esters are inert
Both C=O reducedLiAlH₄no chemoselectivity: diol
Ester only reducedprotect the ketone as an ethylene acetal; LiAlH₄; deprotecta protecting group supplies the chemoselectivity the reagent lacks

Memory Tricks

Don’t Confuse

ThisIs not this
Chemoselective (different groups)Regioselective (different positions of the same group)
Markovnikov (HX, oxymercuration, Wacker)anti-Markovnikov (HBr/peroxide, hydroboration)
Epoxide + NaOMe/MeOH: attack at less substituted CEpoxide + H⁺/MeOH: attack at more substituted C
Kinetic enolate (LDA, −78 °C): less substitutedThermodynamic enolate (equilibrating): more substituted
1,2-addition (RLi, Luche)1,4-addition (R₂CuLi, Michael donors)
Zaitsev (small base)Hofmann (bulky base, NMe₃⁺)
Narasaka–Prasad: syn-1,3-diolEvans–Saksena: anti-1,3-diol
Felkin–Anh: non-chelatingChelation control: Lewis-acidic metal binds C=O and α-OR
Directed delivery (cis to OH)Steric approach (anti to the bulky group)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Use R = 8.314 J K⁻¹ mol⁻¹.

Level 1: Foundation

  1. 2-Methylcyclohexanone is treated with LDA in THF at −78 °C and then with CH₃I. Name the product.
  2. Which carbon of styrene oxide (2-phenyloxirane) is attacked by methanol under acid catalysis?
  3. Is the reduction of a ketone in the presence of an ester by NaBH₄ chemo-, regio- or stereoselective?
Answers
  1. 2,6-Dimethylcyclohexanone (kinetic enolate at the CH₂ side, C6).
  2. The benzylic carbon (C2, the more substituted, cation-stabilising position): product 2-methoxy-2-phenylethanol.
  3. Chemoselective.

Level 2: Part B Style

Practice Q1. 2,2-Dimethyloxirane is treated (I) with NaOMe in MeOH and (II) with MeOH containing catalytic H₂SO₄. The products are

(a) (I) 1-methoxy-2-methylpropan-2-ol; (II) 2-methoxy-2-methylpropan-1-ol (b) (I) 2-methoxy-2-methylpropan-1-ol; (II) 1-methoxy-2-methylpropan-2-ol (c) both give 1-methoxy-2-methylpropan-2-ol (d) both give 2-methoxy-2-methylpropan-1-ol

Answer: (a)

Methoxide attacks the less hindered CH₂ by SN2. Under acid catalysis the protonated epoxide opens at the tertiary carbon, which best stabilises the developing positive charge.

Practice Q2. Which reagent reduces the ring ketone of 3-(3-oxocyclohexyl)propanal selectively, leaving the aliphatic aldehyde (after work-up) intact?

(a) NaBH₄, EtOH, room temperature (b) NaBH(OAc)₃ (c) NaBH₄, CeCl₃·7H₂O, MeOH (d) LiAlH₄

Answer: (c)

Under Luche conditions the aldehyde is reversibly converted into a methanol adduct (hemiacetal/acetal) that borohydride does not reduce, and the ketone is reduced; work-up releases the aldehyde. (a) and (b) reduce the aldehyde preferentially; (d) reduces both.

Practice Q3. 1-Methylcyclohexene is treated with BH₃·THF and then H₂O₂/NaOH. The product is

(a) 1-methylcyclohexanol (b) cis-2-methylcyclohexanol (racemic) (c) trans-2-methylcyclohexanol (racemic) (d) cyclohexylmethanol

Answer: (c)

Boron adds to the less substituted ring carbon (anti-Markovnikov) and H to C1, syn. Oxidation replaces B with OH with retention. H and OH are therefore cis on the ring, which puts CH₃ and OH trans. Achiral reagents give the racemate. (a) is the Markovnikov product (oxymercuration).

Practice Q4. A β-hydroxy ketone is reduced (I) with Et₂BOMe then NaBH₄ at −78 °C, and (II) with Me₄NBH(OAc)₃ in AcOH/MeCN. Which statement is correct?

(a) (I) gives the syn-1,3-diol and (II) the anti-1,3-diol (b) both give the syn-diol (c) (I) gives the anti-diol and (II) the syn-diol (d) neither is diastereoselective

Answer: (a)

Narasaka–Prasad: the boron chelate is attacked by external hydride from the less hindered face, giving syn. Evans–Saksena: the hydroxyl exchanges onto the triacetoxyborohydride and delivers hydride intramolecularly, giving anti.

Level 3: Part C Style

Practice Q5. An equimolar mixture of benzaldehyde (A) and acetophenone (B), 1.00 mmol each, is treated at 25 °C with a deficit of NaBH₄. When the reaction stops, 20% of A and 80% of B remain.

Which statements are correct?

  1. \( k_A/k_B \) is about 7.2.
  2. The difference in free energy of activation is about 4.9 kJ mol⁻¹.
  3. If all four hydrides of each BH₄⁻ were used, 0.25 mmol of NaBH₄ was consumed.
  4. The product ratio (benzyl alcohol : 1-phenylethanol) equals \( k_A/k_B \).

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1, 2, 3 and 4 (d) 3 and 4 only

Answer: (a) 1, 2 and 3 only
  1. Correct. \( k_A/k_B = \ln 0.20/\ln 0.80 = (-1.609)/(-0.2231) = 7.21 \).
  2. Correct. \( \Delta\Delta G^\ddagger = RT\ln 7.21 = 8.314 \times 298.15 \times 1.976 = 4.90 \) kJ mol⁻¹.
  3. Correct. Hydride consumed = 0.80 (A) + 0.20 (B) = 1.00 mmol; 1.00/4 = 0.25 mmol BH₄⁻.
  4. Wrong. Products are 0.80 : 0.20 = 4 : 1, not 7.2 : 1. Product ratios equal rate-constant ratios only at very low conversion.

Practice Q6. A diastereoselective reduction gives 97 : 3 of two diastereomers at −78 °C (195.15 K). Assume kinetic control and a temperature-independent \( \Delta\Delta G^\ddagger \).

Which statements are correct?

  1. \( \Delta\Delta G^\ddagger \) is about 5.6 kJ mol⁻¹.
  2. At 25 °C (298.15 K) the ratio would be about 91 : 9.
  3. The de at −78 °C is 94%.
  4. Running the reaction at −100 °C would lower the selectivity.

(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. \( RT\ln(97/3) = 8.314 \times 195.15 \times \ln 32.33 = 8.314 \times 195.15 \times 3.476 = 5.64 \) kJ mol⁻¹.
  2. Correct. \( e^{5640/(8.314 \times 298.15)} = e^{2.275} = 9.73 \); fraction major = 9.73/10.73 = 0.907, about 91 : 9.
  3. Correct. de = 97 − 3 = 94%.
  4. Wrong. With a fixed \( \Delta\Delta G^\ddagger \), lowering T raises the ratio.

Practice Q7. Compound S is methyl (E)-6-oxohept-2-enoate, CH₃CO–CH₂CH₂–CH=CH–CO₂CH₃. Consider these single-step treatments: (I) NaBH₄, MeOH, 0 °C; (II) H₂ (1 equiv), Pd/C; (III) Me₂CuLi, then H₃O⁺; (IV) DIBAL-H (1 equiv), −78 °C.

Which statements are correct?

  1. (I) reduces mainly the ketone and leaves the unsaturated ester.
  2. (II) reduces mainly the C=C bond.
  3. (III) adds methyl to C3 (the β-carbon of the unsaturated ester).
  4. (IV) gives mainly the corresponding α,β-unsaturated aldehyde with the ketone untouched.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1, 2, 3 and 4 (d) 2, 3 and 4 only

Answer: (a) 1, 2 and 3 only
  1. Correct. NaBH₄ reduces the isolated ketone much faster than the conjugated ester; esters are essentially inert to it.
  2. Correct. The conjugated C=C is hydrogenated over Pd before either carbonyl.
  3. Correct. Cuprates add 1,4 to α,β-unsaturated esters; the β-carbon is C3. (A cuprate also reacts only slowly with the isolated ketone.)
  4. Wrong. DIBAL-H reduces ketones readily even at −78 °C, so with one equivalent the isolated ketone competes strongly with the ester. In addition, DIBAL usually takes α,β-unsaturated esters on to the allylic alcohol rather than stopping cleanly at the enal. Protect the ketone (as an acetal) first, and expect to use the allylic alcohol plus an oxidation (MnO₂) to reach the enal.

Quick Revision Table

SelectivityReagent / conditionOutcome
ChemoNaBH₄ketone/aldehyde over ester, acid, amide
ChemoBH₃·THFacid over ester
ChemoNaBH(OAc)₃, NaBH₃CNaldehyde/iminium over ketone
ChemoLucheketone over aldehyde; enone 1,2
ChemoMnO₂; TEMPOallylic OH; primary OH
ChemomCPBA vs H₂O₂/NaOHelectron-rich C=C vs enone
ChemoLindlar; Wilkinson; 9-BBNalkyne; least hindered alkene
Chemoorganozinc, organoborontolerate esters, nitriles
RegioHX, oxymercuration, WackerMarkovnikov
RegioHBr/ROOR, hydroborationanti-Markovnikov
Regioepoxide + strong Nu (basic)less substituted C
Regioepoxide + H⁺more substituted C
Regiocyclohexene oxidetrans-diaxial (Fürst–Plattner)
RegioLDA, −78 °C / equilibratingless / more substituted enolate
RegioRLi, Luche / R₂CuLi, Michael1,2 / 1,4
Regiosmall base / bulky baseZaitsev / Hofmann
RegioDoM (amide, OMe, carbamate + BuLi)ortho-lithiation
Stereosmall / bulky hydride on cyclohexanoneequatorial OH / axial OH
StereoNarasaka–Prasad / Evans–Saksenasyn / anti 1,3-diol
StereoHenbest, VO(acac)₂, Simmons–Smith, Crabtreecis to OH
StereoZimmerman–TraxlerZ → syn, E → anti
Numbers\( \Delta\Delta G^\ddagger = RT\ln(\text{ratio}) \); competition \( k_A/k_B = \ln f_A/\ln f_B \)5.7 kJ mol⁻¹ per factor 10 at 298 K

Key Takeaways

What’s Next

Advertisement
Advertisement