Skip to content

Functional Group Interconversion: Oxidation Levels, Leaving Groups and Acyl Ladders

CSIR NET organic chemistry: oxidation levels of carbon, alcohol activation, Mitsunobu, SN2 displacements, acyl interconversions, C=O to C=C and C≡C, amines.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: One Alcohol, Three Amines
  3. Oxidation Levels: the Map Behind Every FGI
  4. Activating Alcohols: Turning OH into a Leaving Group
  5. Displacing the Leaving Group: the SN2 Toolbox
  6. The Acyl Ladder: Interconverting Carboxylic Acid Derivatives
  7. Between C=O, C=C and C≡C
  8. Amines and Diazonium Salts
  9. Planning with FGI
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: One Alcohol, Three Amines

Oxidation Levels: the Map Behind Every FGI

Count, for each carbon, the number of bonds to atoms more electronegative than carbon (O, N, halogen, S). That number is the carbon’s oxidation level. Interconversions within a level need only acid, base or a nucleophile; moving between levels needs an oxidant or a reductant.

LevelBonds to heteroatomsTypical groups at that carbon
0nonealkane C–H
1onealcohol, ether, alkyl halide, sulfonate, amine, thiol; an alkene counts here (hydration gives an alcohol without redox)
2twoaldehyde, ketone, acetal, imine, gem-dihalide, enol ether; an alkyne counts here (hydration gives a ketone)
3threecarboxylic acid, ester, amide, acid chloride, anhydride, nitrile, orthoester, trihalide
4fourCO₂, carbonate, urea, carbamate, isocyanate, CCl₄
graph LR
    L0["Level 0
alkane"] -->|"radical halogenation
C-H oxidation"| L1["Level 1
ROH, RX, RNH2,
alkene"] L1 -->|"oxidation
(PCC, Swern, DMP)"| L2["Level 2
aldehyde, ketone,
acetal, alkyne"] L2 -->|"oxidation
(Pinnick, Jones)"| L3["Level 3
acid, ester, amide,
nitrile"] L3 -->|"LiAlH4"| L1 L2 -->|"NaBH4"| L1 L2 -->|"Wolff-Kishner
Clemmensen"| L0 L1 -->|"Barton-McCombie
Bu3SnH / LiAlH4 on RX"| L0

Two consequences the exam uses:

  • Hydrolysis never changes the level. Nitrile → amide → acid stays at level 3; acetal → ketone stays at level 2; gem-dibromide → ketone stays at level 2.
  • A level-3 carbon cannot become a ketone (level 2) by hydrolysis; you need a reductive step (an organometallic addition counts: RMgX adds to a nitrile and the imine hydrolyses to a ketone, because the new C–C bond replaces a C–N bond).

Activating Alcohols: Turning OH into a Leaving Group

Hydroxide is a poor leaving group (the conjugate acid, water, has pKa about 15.7). Every substitution of an alcohol therefore starts by converting OH into something better: protonated OH, a halophosphite, a chlorosulfite, a sulfonate or an alkoxyphosphonium ion.

ReagentProductMechanism at the carbinol carbonNotes
HBr, HI (conc.)RBr, RISN1 for 3° and benzylic; SN2 for 1°carbocation rearrangements possible for 2°/3°
HCl/ZnCl₂ (Lucas)RClmainly SN1rate 3° > 2° ≫ 1° (the Lucas test)
PBr₃RBrSN2 on the O–PBr₂ intermediate: inversiongood for 1° and 2°; no rearrangement
SOCl₂ (no base)RClSNi: retentionSO₂ and HCl are gases, so work-up is easy
SOCl₂, pyridineRClfree Cl⁻ attacks from the back: inversion
PPh₃, CBr₄ or CCl₄ (Appel)RBr, RClalkoxyphosphonium, then SN2: inversionneutral conditions; Ph₃P=O is the by-product
TsCl or MsCl, pyridine or Et₃NROTs, ROMsO–S bond forms; C–O bond untouched: retentionthe sulfonate is then displaced with inversion
Tf₂O, pyridine (or 2,6-lutidine)ROTfretentiontriflate is the most reactive common sulfonate
NaI, acetone (Finkelstein) on RCl/RBr/ROTsRISN2: inversiondriven by precipitation of NaCl or NaBr in acetone

The Mitsunobu reaction

Mitsunobu reaction

ROH + H–Nu + PPh₃ + DEAD (or DIAD) → R–Nu + Ph₃P=O + the hydrazine-1,2-dicarboxylate.

PPh₃ adds to the azodicarboxylate; the resulting betaine deprotonates the pronucleophile H–Nu; the alcohol is captured as an alkoxyphosphonium ion; and the conjugate base Nu⁻ displaces Ph₃P=O by SN2. A secondary alcohol is converted with clean inversion.

Pronucleophile H–NuProductUse
RCOOH (often 4-nitrobenzoic acid)ester, then hydrolysisinverting a secondary alcohol
PhthalimideN-alkylphthalimide, then N₂H₄primary or secondary amine (Gabriel-type), inverted
HN₃ or diphenylphosphoryl azide (DPPA)alkyl azideamine after reduction
ArOHaryl alkyl ether
Thioacetic acidthioesterthiol after hydrolysis

The pronucleophile has to be acidic enough to be deprotonated by the betaine; carboxylic acids, phenols, imides and HN₃ work, simple amines and alcohols do not. Primary and secondary alcohols react; tertiary alcohols generally do not, as expected for SN2.

Displacing the Leaving Group: the SN2 Toolbox

Once the alcohol is a halide or sulfonate, the choice of nucleophile decides the new group.

NucleophileProductCarbon countFollow-up
NaCN (DMSO)nitrile R–CN+1hydrolysis → RCOOH; LiAlH₄ → RCH₂NH₂; DIBAL → RCHO
NaN₃ (DMF)azide R–N₃0H₂/Pd, LiAlH₄ or Staudinger (PPh₃ then H₂O) → RNH₂
Potassium phthalimide (Gabriel)N-alkylphthalimide0N₂H₄ (Ing–Manske) or hydrolysis → primary amine, no over-alkylation
RCOO⁻ (Cs⁺ salts in DMF react well)ester0hydrolysis → inverted alcohol
RS⁻thioether0oxidation to sulfoxide or sulfone
HC≡C⁻ Na⁺terminal alkyne+2works only on unhindered 1° halides; 2° and 3° eliminate
Malonate or acetoacetate anionalkylated diester or keto ester+2 after decarboxylationmalonic and acetoacetic ester syntheses
LiAlH₄ or LiEt₃BHalkane R–H0reductive removal of the leaving group

Elimination competes whenever the substrate is secondary or tertiary and the nucleophile is also a strong base. Azide, cyanide, thiolates and halides are good nucleophiles but weak bases, which is why they are the reliable SN2 partners for secondary sulfonates.

The Acyl Ladder: Interconverting Carboxylic Acid Derivatives

All carboxylic acid derivatives sit at oxidation level 3, so they interconvert by nucleophilic acyl substitution. The direction is set by reactivity:

$$\text{RCOCl} > (\text{RCO})_2\text{O} > \text{RCOSR}' > \text{RCOOR}' \approx \text{RCOOH} > \text{RCONR}'_2 > \text{RCOO}^-$$

Downhill conversions (more reactive → less reactive) happen with just the nucleophile. Uphill conversions need activation of the acid.

ConversionReagentsComment
Acid → acid chlorideSOCl₂; (COCl)₂ with catalytic DMF; PCl₅DMF works through a chloroiminium (Vilsmeier-type) intermediate
Acid → methyl esterMeOH, H⁺ (Fischer, equilibrium); CH₂N₂ or TMSCHN₂Fischer needs excess alcohol or water removal
Acid → ester, mildDCC, catalytic DMAP (Steglich)the O-acylisourea is the activated acid; DMAP is an acyl-transfer catalyst
Hydroxy acid → macrolactone2,4,6-trichlorobenzoyl chloride, Et₃N, then DMAP, high dilution (Yamaguchi)mixed anhydride; dilution favours ring closure over oligomers
Acid → amidevia acid chloride + amine; or carbodiimide (DCC, EDC) with HOBt; uronium reagents (HATU)HOBt suppresses racemisation in peptide couplings
Primary amide → nitrileP₂O₅, POCl₃, SOCl₂, TFAA, Burgess reagentdehydration; level unchanged
Nitrile → acidH₃O⁺, heat; or NaOH, H₂O₂ then acidvia the amide
Ester → Weinreb amideMeNH(OMe)·HCl with AlMe₃ or iPrMgClN-methoxy-N-methylamide
Weinreb amide → ketoneRMgX or RLi, then H₃O⁺the five-membered chelated tetrahedral intermediate survives until work-up, so no second addition
Weinreb amide → aldehydeLiAlH₄ or DIBAL, then H₃O⁺same chelate protection
Nitrile → ketoneRMgX, then H₃O⁺the imine anion does not add a second RMgX
Ester → tertiary alcohol2 RMgXthe ketone formed after the first addition is more reactive than the ester

Carbon-count changes on the acyl ladder

ReactionSubstrate → productCarbon changeStereochemistry of the migrating group
HofmannRCONH₂ + Br₂/NaOH → RNH₂−1retention
CurtiusRCON₃ (from RCOCl + NaN₃, or RCOOH + DPPA) → RN=C=O → RNH₂ or carbamate−1retention
SchmidtRCOOH + HN₃, H⁺ → RNH₂−1retention
Lossenhydroxamic acid derivative → isocyanate−1retention
Arndt–EistertRCOCl + CH₂N₂ → diazoketone → (Wolff, Ag⁺, H₂O) RCH₂COOH+1retention
Nitrile routeRX → RCN → RCOOH+1inversion at the SN2 step

All four “−1” reactions go through an isocyanate formed by a 1,2-shift to electron-deficient nitrogen. Trapping the isocyanate with water gives the amine (via the carbamic acid and loss of CO₂); with an alcohol (tBuOH, BnOH) it gives a Boc or Cbz carbamate directly. Mechanistic details are in the named-reactions chapter.

Between C=O, C=C and C≡C

From → toReagentsKey feature
Aldehyde/ketone → alkenePh₃P=CHR (Wittig)unstabilised ylides: mainly Z; stabilised ylides: mainly E
Aldehyde → (E)-α,β-unsaturated ester(EtO)₂P(O)CH₂CO₂Et, base (Horner–Wadsworth–Emmons)water-soluble phosphate by-product; E-selective
Aldehyde → terminal alkyne (+1 C)CBr₄, PPh₃ → 1,1-dibromoalkene; then 2 n-BuLi (Corey–Fuchs)the vinyl dibromide is an isolable intermediate
Aldehyde → terminal alkyne (+1 C)dimethyl (1-diazo-2-oxopropyl)phosphonate, K₂CO₃, MeOH (Ohira–Bestmann modification of Seyferth–Gilbert)one pot, mild base
Alkene → Markovnikov alcoholH₃O⁺ (rearrangement possible); Hg(OAc)₂/H₂O then NaBH₄ (oxymercuration, no rearrangement)
Alkene → anti-Markovnikov alcoholBH₃·THF or 9-BBN, then H₂O₂/NaOH (hydroboration–oxidation)syn addition; C–B → C–O with retention
Terminal alkyne → methyl ketoneHgSO₄, H₂SO₄, H₂OMarkovnikov hydration via the enol
Terminal alkyne → aldehydedisiamylborane or 9-BBN, then H₂O₂/NaOHanti-Markovnikov, via the enol
Alcohol → alkeneconc. H₂SO₄ or H₃PO₄, heatE1: Zaitsev product, rearrangements
Alcohol → alkene, mildBurgess reagent; Martin sulfurane; via xanthate (Chugaev, heat)Burgess and Chugaev are syn (Ei) eliminations
Primary alcohol → terminal alkeneo-nitrophenyl selenocyanate, PBu₃; then H₂O₂ (Grieco)selenoxide syn elimination
Alkyl halide → alkeneKOtBu (Hofmann product with bulky base) or NaOEt (Zaitsev)E2: anti-periplanar

Amines and Diazonium Salts

Routes to amines grouped by the oxidation level of the precursor:

PrecursorReagentAmine obtained
Aldehyde/ketone + amineNaBH₃CN (pH about 6–7) or NaBH(OAc)₃ (reductive amination)1°, 2° or 3°; the iminium is reduced faster than the carbonyl
AmideLiAlH₄amine with the same carbon count (C=O → CH₂)
NitrileLiAlH₄ or H₂/Raney NiRCH₂NH₂ (one carbon more than the RX used to make the nitrile)
Nitro compoundH₂/Pd; Fe/HCl; Sn/HCl; SnCl₂ArNH₂
AzideH₂/Pd; LiAlH₄; PPh₃/H₂ORNH₂
Amide (Hofmann) or acyl azide (Curtius)Br₂/NaOH; heat then H₂ORNH₂ with one carbon fewer

Aryl diazonium salts (ArNH₂ + NaNO₂, HCl, 0–5 °C) turn the amino group into almost anything:

ReagentProductName
CuCl, CuBr, CuCNArCl, ArBr, ArCNSandmeyer
KIArI(no copper needed)
HBF₄, then heatArFBalz–Schiemann
H₂O, heatArOH
H₃PO₂ArHreductive deamination
ArOH or ArNR₂ (activated arene)azo dye Ar–N=N–Ar′azo coupling (N retained)

Planning with FGI

When a target needs a group that the starting material lacks, ask three questions before reaching for a reagent:

  1. Is the oxidation level the same? If yes, look for a substitution, hydrolysis or addition. If no, choose an oxidation or reduction first (next two pages).
  2. Does the carbon count change? +1: cyanide, Corey–Fuchs, Arndt–Eistert, Wittig with Ph₃P=CH₂. −1: Hofmann/Curtius, haloform, ozonolysis of a terminal alkene.
  3. What happens to nearby stereocentres? SN2 inverts; sulfonylation and Hofmann/Curtius retain; anything through a planar intermediate (carbocation, enol, imine, ketone) scrambles.
graph TD
    ROH["R-OH
(level 1)"] -->|"TsCl, py
retention"| ROTs["R-OTs"] ROH -->|"PBr3 or Appel
inversion"| RBr["R-Br"] ROTs -->|"NaN3
inversion"| RN3["R-N3"] RN3 -->|"H2/Pd or PPh3/H2O"| RNH2["R-NH2"] RBr -->|"NaCN
+1 C"| RCN["R-CN
(level 3)"] RCN -->|"H3O+"| RCOOH["R-COOH"] RCOOH -->|"SOCl2"| RCOCl["R-COCl"] RCOCl -->|"NaN3, heat
Curtius, -1 C"| RNH2b["R-NH2
(one C fewer)"] ROH -->|"Mitsunobu, RCOOH
inversion"| Ester["inverted ester"]

Memory Tricks

Don’t Confuse

ThisIs not this
Tosylation (O–S bond formed, C–O intact): retentionPBr₃ / Appel (C–O broken by Br⁻): inversion
SOCl₂ alone: SNi, retentionSOCl₂ + pyridine: SN2, inversion
Gabriel (phthalimide, then N₂H₄): 1° amine onlyDirect alkylation of NH₃: mixture of amines
LiAlH₄ on an amide: amine, same carbonsHofmann on an amide: amine, one carbon fewer
LiAlH₄ on a nitrile: RCH₂NH₂DIBAL on a nitrile: RCHO after hydrolysis
Ester + 2 RMgX: tertiary alcoholWeinreb amide + RMgX: ketone
Hydroboration of a terminal alkyne: aldehydeHg²⁺ hydration of a terminal alkyne: methyl ketone
Corey–Fuchs (two steps, dibromoalkene)Ohira–Bestmann (one pot, diazophosphonate)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Atomic masses used: C 12.011, H 1.008, N 14.007, O 15.999.

Level 1: Foundation

  1. What is the oxidation level of the carbon in (a) an acetal carbon, (b) a nitrile carbon, (c) the CH₂ of an alkyl bromide?
  2. (S)-Butan-2-ol is treated with MsCl/Et₃N. What is the configuration of the mesylate?
  3. Name the reagent pair that converts a primary amide into an amine with one carbon fewer.
Answers
  1. (a) 2 (two C–O bonds, like the ketone it hydrolyses to); (b) 3; (c) 1.
  2. (S). Only the O–H bond reacts; the stereocentre is untouched and the priority order (O-substituent first) is unchanged.
  3. Br₂ and aqueous NaOH (Hofmann rearrangement).

Level 2: Part B Style

Practice Q1. (R)-Pentan-2-ol is converted to its tosylate, which is then heated with NaCN in DMSO. The nitrile is reduced with LiAlH₄. The final product is

(a) (R)-2-methylpentan-1-amine (b) (S)-2-methylpentan-1-amine (c) racemic 2-methylpentan-1-amine (d) (R)-pentan-2-amine

Answer: (b)

Tosylation: retention, (R)-tosylate. SN2 by cyanide: inversion, giving 2-methylpentanenitrile with the CN on the former carbinol carbon. LiAlH₄ converts C≡N into CH₂NH₂ without touching the stereocentre. Assigning priorities at the stereocentre in the amine: CH₂NH₂ (C attached to N) > CH₂CH₂CH₃ (C,H,H) > CH₃ > H. In the alcohol the priorities were OH > propyl > CH₃ > H. The new group CH₂NH₂ occupies the inverted position of OH and also ranks first, so the geometric inversion appears as a change of descriptor: (S). (d) is the wrong carbon count (the cyanide carbon has been added), and (c) would need a planar intermediate.

Practice Q2. Which reagent converts a methyl ester RCOOMe most directly into a methyl ketone RCOCH₃ without over-addition?

(a) CH₃MgBr (2 equiv), then H₃O⁺ (b) MeNH(OMe)·HCl/AlMe₃, then CH₃MgBr, then H₃O⁺ (c) LiAlH₄, then CH₃MgBr (d) DIBAL at −78 °C, then H₃O⁺

Answer: (b)

The Weinreb amide forms a stable five-membered Mg chelate after one addition, which collapses to the ketone only on acid work-up. (a) gives the tertiary alcohol R–C(OH)(CH₃)₂. (c) reduces the ester to a primary alcohol. (d) gives the aldehyde.

Practice Q3. Treatment of (S)-2-methylbutanoic acid with diphenylphosphoryl azide and Et₃N, then heating in tert-butanol, gives

(a) racemic tert-butyl N-(butan-2-yl)carbamate (b) tert-butyl N-[(S)-butan-2-yl]carbamate (c) tert-butyl N-[(R)-butan-2-yl]carbamate (d) tert-butyl (S)-2-methylbutanoate

Answer: (b)

DPPA converts the acid into the acyl azide; heating gives the isocyanate by Curtius rearrangement, with retention at the migrating sec-butyl carbon; tBuOH traps the isocyanate as the Boc carbamate. Priorities at the stereocentre: in the acid, COOH > C₂H₅ > CH₃ > H; in the carbamate, NHBoc > C₂H₅ > CH₃ > H. The nitrogen takes the place of the carboxyl carbon and also ranks first, so retention keeps the descriptor (S). (d) would require ester formation without rearrangement.

Practice Q4. Which sequence converts benzaldehyde into phenylacetylene (PhC≡CH)?

(a) CBr₄, PPh₃; then 2 n-BuLi; then H₂O (b) Ph₃P=CH₂; then Br₂; then 1 equiv NaOEt (c) HC≡CMgBr; then H₃O⁺ (d) NH₂NH₂, KOH, heat

Answer: (a)

Corey–Fuchs: the aldehyde becomes PhCH=CBr₂ (one extra carbon); two equivalents of n-BuLi eliminate HBr and exchange the remaining Br, giving the lithium acetylide, which is protonated on work-up. (b) styrene → dibromide; one equivalent of a mild base gives a vinyl bromide, not the alkyne. (c) gives a propargylic alcohol (C₉). (d) is a Wolff–Kishner reduction to toluene.

Level 3: Part C Style

Practice Q5. A chemist runs a Mitsunobu reaction on 5.00 g of enantiopure (R)-octan-2-ol (C₈H₁₈O) with 4-nitrobenzoic acid, PPh₃ and DIAD, and isolates 8.58 g of octan-2-yl 4-nitrobenzoate (C₁₅H₂₁NO₄). The ester is hydrolysed (KOH, MeOH) in quantitative yield.

Which statements are correct?

  1. The isolated yield of the ester is about 80%.
  2. The hydrolysis product is (S)-octan-2-ol.
  3. If the Mitsunobu step proceeded with 2% racemisation (98% of molecules inverted cleanly, 2% racemised), the alcohol obtained would have an ee of 96%.
  4. Replacing the Mitsunobu step by “TsCl/pyridine, then potassium 4-nitrobenzoate in DMF” would give the same enantiomer of the final alcohol.

(a) 1, 2 and 4 only (b) 1 and 2 only (c) 1, 2, 3 and 4 (d) 2 and 3 only

Answer: (a) 1, 2 and 4 only
  1. Correct. M(C₈H₁₈O) = 130.23 g mol⁻¹, so 5.00 g = 38.39 mmol. M(C₁₅H₂₁NO₄) = 279.34 g mol⁻¹, so 8.58 g = 30.72 mmol. Yield = 30.72/38.39 = 0.800 = 80.0%.
  2. Correct. Mitsunobu inverts the carbinol carbon; ester hydrolysis cleaves the acyl–O bond (BAc2) and does not touch the stereocentre. OH outranks hexyl and methyl in both alcohols, so the inversion changes R to S.
  3. Wrong. The 2% racemised molecules split 1% S and 1% R. The product is 98 + 1 = 99% S and 1% R, so ee = (99 − 1)/100 = 98%, not 96%. Racemising a fraction x lowers the ee by x, not by 2x.
  4. Correct. Tosylation retains, SN2 by the carboxylate inverts, hydrolysis retains: one net inversion, the same (S)-alcohol.

Practice Q6. Compound A, C₅H₁₁Br, is optically active. A reacts with NaN₃ in DMF to give B, C₅H₁₁N₃, which on treatment with PPh₃ and then water gives C, C₅H₁₃N. A also reacts with KCN in DMSO to give D, C₆H₁₁N, which on hydrolysis gives E, C₆H₁₂O₂. E with SOCl₂ and then NaN₃, heating and aqueous work-up gives F, C₅H₁₃N.

Which statements are correct?

  1. C and F are constitutionally identical amines.
  2. If A is (R)-2-bromopentane, C is (S)-pentan-2-amine.
  3. If A is (R)-2-bromopentane, F is (S)-pentan-2-amine.
  4. C and F are enantiomers of each other.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1, 2 and 4 only (d) 2 and 4 only

Answer: (a) 1, 2 and 3 only
  • A → B → C: SN2 by azide (inversion), Staudinger reduction (no change at carbon). C = pentan-2-amine, one inversion. Priorities: Br > propyl > CH₃ > H and NH₂ > propyl > CH₃ > H: inversion changes R to S.
  • A → D → E: SN2 by cyanide (inversion) gives 2-methylpentanenitrile; hydrolysis gives 2-methylpentanoic acid (C₆H₁₂O₂). One inversion so far.
  • E → F: acid chloride, acyl azide, Curtius with retention, hydrolysis of the isocyanate: the carboxyl carbon is lost and N sits exactly where the CN carbon was. F = pentan-2-amine (C₅H₁₃N) with one net inversion relative to A: (S).

So 1 is correct (both are pentan-2-amine), 2 and 3 are correct, and 4 is wrong: C and F are the same enantiomer. A nice check that Curtius retention is “invisible” once the extra carbon is removed.

Practice Q7. A six-step linear synthesis has step yields of 92%, 85%, 78%, 90%, 88% and 95%. An alternative convergent plan makes two fragments in three steps each (85% per step) and joins them in one final coupling step (80%).

Which statements are correct?

  1. The overall yield of the linear route is about 46%.
  2. A linear route of six steps at 85% each would give about 38%.
  3. The convergent route’s overall yield, based on either fragment, is about 49%.
  4. Convergence helps only if every step in the convergent route is higher-yielding than in the linear route.

(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. 0.92 × 0.85 × 0.78 × 0.90 × 0.88 × 0.95 = 0.459.
  2. Correct. 0.85⁶ = 0.377.
  3. Correct. The longest linear sequence is 3 + 1 = 4 steps: 0.85³ × 0.80 = 0.491.
  4. Wrong. Convergence wins because the longest linear sequence is shorter (four steps instead of six), even with identical per-step yields, as statements 2 and 3 show.

Quick Revision Table

IdeaFact
Oxidation levelnumber of C–heteroatom bonds; alkene = level 1, alkyne = level 2
Hydrolysisnever changes the oxidation level
TsCl, MsCl, Tf₂Oretention (O-sulfonylation)
PBr₃, Appel, Finkelstein, SN2inversion
SOCl₂alone: retention (SNi); with pyridine: inversion
MitsunobuPPh₃ + DEAD/DIAD + acidic H–Nu; one clean inversion; fails at 3°
Cyanide+1 C; then acid, amine (LiAlH₄) or aldehyde (DIBAL)
Azideamine by H₂/Pd, LiAlH₄ or Staudinger
Gabrielprimary amine only
Acyl reactivityRCOCl > anhydride > thioester > ester ≈ acid > amide > carboxylate
Weinreb amideRMgX → ketone; LiAlH₄/DIBAL → aldehyde; no over-addition
Ester + 2 RMgXtertiary alcohol
Hofmann, Curtius, Schmidt, Lossen−1 C via isocyanate; retention
Arndt–Eistert+1 C via diazoketone and Wolff rearrangement
Corey–Fuchs / Ohira–BestmannRCHO → RC≡CH (+1 C)
Hydroborationanti-Markovnikov, syn; alkyne → aldehyde
Burgess, Chugaev, Griecosyn eliminations
DiazoniumCuX (Sandmeyer), KI, HBF₄ (F), H₂O (OH), H₃PO₂ (H)

Key Takeaways

What’s Next