Oxidations: Alcohols, Alkenes, C–H Bonds and Baeyer–Villiger
CSIR NET organic oxidations: Cr(VI), Swern, DMP, TPAP, TEMPO, MnO₂, Pinnick; epoxidation, OsO₄, ozonolysis, periodate, SeO₂, Baeyer–Villiger, Wacker, sulfur.
- 16 min
On this page · 16 sections
- Prerequisites
- The Hook: Why Jones Overshoots and PCC Does Not
- Alcohols to Aldehydes, Ketones and Acids
- Alkene Oxidations
- Wacker Oxidation
- Allylic, Benzylic and α-Carbonyl C–H Oxidation
- Baeyer–Villiger Oxidation
- Heteroatom and Enolate Oxidations
- Counting Electrons in an Oxidation
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Functional Group Interconversion: oxidation levels of carbon; this page is the “upward” half of that map.
- Stereospecific and Stereoselective Reactions: syn and anti additions to Z and E alkenes, meso versus racemic diols.
- Asymmetric Induction and Asymmetric Synthesis: Sharpless epoxidation and dihydroxylation, Jacobsen epoxidation.
- Homogeneous Catalysis by Organometallic Complexes: the Wacker cycle.
The Hook: Why Jones Overshoots and PCC Does Not
Alcohols to Aldehydes, Ketones and Acids
The reagent table
| Reagent | Primary alcohol gives | Secondary alcohol gives | Conditions and selectivity |
|---|---|---|---|
| Jones (CrO₃, H₂SO₄, acetone/H₂O) | carboxylic acid | ketone | strongly acidic; acid-labile groups suffer |
| Collins (CrO₃·2pyridine, CH₂Cl₂) | aldehyde | ketone | anhydrous; large excess needed |
| PCC (pyridinium chlorochromate, CH₂Cl₂) | aldehyde | ketone | mildly acidic (buffer with NaOAc) |
| PDC (pyridinium dichromate) | aldehyde in CH₂Cl₂; acid in DMF | ketone | solvent switches the outcome |
| Swern (DMSO, (COCl)₂, −78 °C; then Et₃N) | aldehyde | ketone | metal-free; by-products Me₂S, CO, CO₂, Et₃NH⁺Cl⁻ |
| Parikh–Doering (SO₃·pyridine, DMSO, Et₃N) | aldehyde | ketone | DMSO activation near 0 °C to room temperature |
| Pfitzner–Moffatt (DMSO, DCC, H⁺ source) | aldehyde | ketone | the first activated-DMSO method; urea by-product |
| Dess–Martin periodinane (DMP, CH₂Cl₂, room temperature) | aldehyde | ketone | neutral, fast; I(V) reagent |
| IBX (2-iodoxybenzoic acid, DMSO or hot EtOAc) | aldehyde | ketone | I(V); poorly soluble in most solvents |
| TPAP / NMO (Ley–Griffith) | aldehyde | ketone | catalytic Ru(VII); NMO is the stoichiometric oxidant |
| TEMPO, NaOCl, KBr (Anelli) | aldehyde (acid if over-oxidised) | slow | oxoammonium ion; primary much faster than secondary |
| MnO₂ (activated) | aldehyde, only if allylic, benzylic or propargylic | ketone, same restriction | heterogeneous; ignores saturated alcohols |
| Oppenauer (Al(OiPr)₃ or Al(OtBu)₃, acetone) | rarely used | ketone | reverse of Meerwein–Ponndorf–Verley; hydride transfer to acetone; equilibrium |
| KMnO₄ (basic, warm) | acid | ketone (may cleave) | harsh |
Aldehyde to carboxylic acid
| Reagent | Comment |
|---|---|
| Pinnick (NaClO₂, NaH₂PO₄, tBuOH/H₂O, 2-methyl-2-butene) | chlorous acid oxidises the aldehyde; the alkene scavenges the HOCl formed, which would otherwise chlorinate alkenes or consume chlorite. Tolerates α,β-unsaturation |
| Tollens (Ag(NH₃)₂⁺) | silver mirror; the test for aldehydes |
| Jones, KMnO₄ | effective but unselective |
| Oxone, H₂O₂ | various |
Alkene Oxidations
Epoxidation
| Reagent | Substrate preference | Stereochemistry |
|---|---|---|
| Peracids (mCPBA, peracetic acid; Prilezhaev) | electron-rich alkenes react faster (more alkyl groups = faster) | syn, concerted (“butterfly” transition state): cis-alkene → cis-epoxide |
| mCPBA on an allylic or homoallylic alcohol (Henbest) | hydroxyl directs by H-bonding | epoxide cis to the OH |
| VO(acac)₂, tBuOOH | allylic alcohols, very selective over isolated alkenes | cis to the OH; can epoxidise the allylic alkene in the presence of a more electron-rich isolated one |
| Ti(OiPr)₄, (+)- or (−)-diethyl tartrate, tBuOOH (Sharpless) | allylic alcohols only | enantioselective; face set by the tartrate |
| H₂O₂ or tBuOOH, NaOH (Weitz–Scheffer) | electron-poor alkenes (enones) | nucleophilic conjugate addition, then ring closure; stepwise |
| Dimethyldioxirane (DMDO) | broad; neutral | syn; acetone is the only by-product |
| Mn(salen) (Jacobsen), NaOCl | unfunctionalised cis-alkenes | enantioselective |
| Chiral fructose-derived ketone + Oxone (Shi) | trans- and trisubstituted alkenes | enantioselective, via a chiral dioxirane |
Dihydroxylation
| Reagent | Mode | Product from (E)-2-butene |
|---|---|---|
| OsO₄ (catalytic) with NMO (Upjohn) or K₃Fe(CN)₆ | syn, via an osmate ester | (±)-butane-2,3-diol |
| KMnO₄, cold, dilute, basic | syn, via a manganate ester | (±)-diol (yields lower; over-oxidation) |
| mCPBA, then H₃O⁺ | anti (syn epoxidation + backside opening) | meso diol |
| I₂, AgOBz, anhydrous (Prévost) | anti | meso diol (after hydrolysis of the dibenzoate) |
| I₂, AgOAc, wet AcOH (Woodward) | syn | (±)-diol |
| AD-mix-α or AD-mix-β (Sharpless asymmetric dihydroxylation) | syn, enantioselective | one enantiomer of the (R,R)/(S,S) diol |
Prévost and Woodward share an iodonium ion and a cyclic acetoxonium (dioxolanylium) intermediate. Under anhydrous conditions a second carboxylate opens it from the back (anti overall); with water present, the acetoxonium ion is hydrolysed to a monoester without breaking the C–O bonds to the ring carbons (syn overall).
Oxidative cleavage
| Reagent | C=C becomes | Notes |
|---|---|---|
| O₃, then Me₂S, PPh₃ or Zn/AcOH (reductive work-up) | aldehydes and/or ketones | =CH₂ gives formaldehyde |
| O₃, then NaBH₄ | alcohols | |
| O₃, then H₂O₂ (oxidative work-up) | carboxylic acids and/or ketones | =CH₂ gives CO₂/formic acid |
| OsO₄ (cat.), NaIO₄ (Lemieux–Johnson) | aldehydes and/or ketones | diol formed, then cleaved in the same pot |
| KMnO₄ (cat.), NaIO₄ (Lemieux–von Rudloff) | acids and/or ketones | |
| KMnO₄, hot, concentrated | acids and/or ketones; terminal =CH₂ → CO₂ |
Ozonolysis proceeds by a 1,3-dipolar cycloaddition (molozonide, a 1,2,3-trioxolane), retro-cycloaddition to a carbonyl and a carbonyl oxide, and recombination to the ozonide (1,2,4-trioxolane) (the Criegee mechanism). The work-up decides the final oxidation level.
1,2-Diol cleavage
| Reagent | Notes |
|---|---|
| NaIO₄ or HIO₄ (Malaprade) | aqueous; via a cyclic periodate ester, so cis-1,2-diols react much faster than trans; rigid trans-diaxial diols may not react |
| Pb(OAc)₄ (Criegee) | organic solvents; can cleave trans-diols through an acyclic pathway |
Periodate bookkeeping (classic Part C): each bond between two adjacent carbons both bearing OH (or OH and C=O) consumes one IO₄⁻.
- A terminal CH₂OH next to CHOH becomes HCHO.
- An internal CHOH flanked on both sides by CHOH becomes HCOOH.
- An alditol with n carbons consumes n − 1 IO₄⁻ and gives 2 HCHO and n − 2 HCOOH. Glycerol (n = 3): 2 IO₄⁻, 2 HCHO, 1 HCOOH.
Wacker Oxidation
R–CH=CH₂ + ½ O₂ → R–CO–CH₃ (PdCl₂ catalytic, CuCl₂ co-catalyst, O₂, aqueous DMF).
Pd(II) activates the alkene; water attacks the more substituted carbon (Markovnikov); β-hydride elimination and tautomerisation give the methyl ketone and Pd(0). Cu(II) reoxidises Pd(0) to Pd(II), and O₂ reoxidises Cu(I). The industrial version converts ethylene into acetaldehyde.
Terminal alkenes give methyl ketones, not aldehydes: a useful contrast with hydroboration–oxidation (anti-Markovnikov alcohol) and with hydroformylation. The full catalytic cycle is drawn on the homogeneous catalysis page.
Allylic, Benzylic and α-Carbonyl C–H Oxidation
| Reagent | Transformation | Notes |
|---|---|---|
| SeO₂ (Riley), often with tBuOOH | alkene → allylic alcohol (or enone/enal) | ene reaction with Se=O, then [2,3]-sigmatropic shift; double bond position retained in the product |
| SeO₂ on a ketone | R–CO–CH₂R′ → R–CO–CO–R′ | α-methylene → 1,2-dicarbonyl |
| KMnO₄ or Na₂Cr₂O₇/H₂SO₄ on an alkylarene | Ar–CH₂R → ArCOOH | needs at least one benzylic H; tert-butylbenzene resists; whole side chain lost |
| CrO₂Cl₂ (Étard) | ArCH₃ → ArCHO | stops at the aldehyde |
| DDQ | dehydrogenation (aromatisation of hydroaromatics); oxidative removal of p-methoxybenzyl (PMB) ethers | high-potential quinone; hydride abstraction |
| NBS, light or initiator | allylic or benzylic C–H → C–Br | radical chain (Wohl–Ziegler); low Br₂ concentration avoids addition |
Baeyer–Villiger Oxidation
Ketone + peracid (mCPBA, CF₃CO₃H) → ester; cyclic ketone → lactone (one ring atom larger).
The peracid adds to C=O (the Criegee intermediate); one group migrates from carbon to the adjacent oxygen as carboxylate leaves. The migrating group moves with retention of configuration, and the group best able to stabilise partial positive charge migrates.
Migratory aptitude (commonly given order):
$$\text{H} > 3^\circ\text{ alkyl} > \text{cyclohexyl} \approx 2^\circ\text{ alkyl} \approx \text{benzyl} \approx \text{phenyl} > 1^\circ\text{ alkyl} > \text{methyl}$$| Ketone | Product |
|---|---|
| Acetophenone | phenyl acetate (Ph migrates, not CH₃) |
| Pinacolone (tBuCOCH₃) | tert-butyl acetate |
| Cyclohexanone | ε-caprolactone (oxepan-2-one) |
| 2-Methylcyclohexanone | 7-methyloxepan-2-one: O is inserted on the more substituted side |
| Aldehyde RCHO | carboxylic acid (H migrates); electron-rich aryl aldehydes can give formate esters instead |
Heteroatom and Enolate Oxidations
| Substrate | Reagent | Product | Use |
|---|---|---|---|
| Sulfide R₂S | NaIO₄, or 1 equiv mCPBA at low temperature | sulfoxide | stop at one oxygen |
| Sulfide R₂S | excess mCPBA, Oxone, H₂O₂/catalyst | sulfone | Julia olefination precursors |
| Tertiary amine | H₂O₂ or mCPBA | amine N-oxide | Cope elimination on heating (syn) |
| α-Phenylselanyl carbonyl | H₂O₂ or NaIO₄ | selenoxide → α,β-unsaturated carbonyl | syn elimination at or below room temperature |
| Silyl enol ether | mCPBA (Rubottom) | α-hydroxy ketone | via epoxidation of the enol ether |
| Enolate | Davis oxaziridine | α-hydroxy carbonyl | electrophilic O transfer |
| Alkyl halide or tosylate | DMSO, base (Kornblum) | aldehyde | alkoxysulfonium then elimination |
Counting Electrons in an Oxidation
Every oxidation is a redox reaction with a stoichiometry you can derive by counting electrons.
- Alcohol → aldehyde or ketone: 2 e⁻. Alcohol → acid (primary): 4 e⁻.
- Cr(VI) → Cr(III): 3 e⁻ per Cr. So 3 R₂CHOH need 2 CrO₃:
- Chlorite (Cl +3) → HOCl (Cl +1) in the Pinnick reaction: 2 e⁻, matching aldehyde → acid.
- IO₄⁻ (I +7) → IO₃⁻ (I +5): 2 e⁻ per C–C cleavage of a 1,2-diol.
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| PCC in CH₂Cl₂: RCH₂OH → RCHO | Jones: RCH₂OH → RCOOH |
| PDC in CH₂Cl₂: aldehyde | PDC in DMF: acid |
| mCPBA (electrophilic): electron-rich C=C | H₂O₂/NaOH (nucleophilic): enone C=C |
| OsO₄ or Woodward: syn diol | Epoxide + H₃O⁺ or Prévost: anti diol |
| O₃ / Me₂S: aldehydes | O₃ / H₂O₂: acids |
| Wacker: terminal alkene → methyl ketone | Hydroboration–oxidation: terminal alkene → primary alcohol |
| SeO₂ on an alkene: allylic alcohol | SeO₂ on a ketone: 1,2-dicarbonyl |
| Baeyer–Villiger on a ketone: ester | Dakin on a hydroxy aryl aldehyde: phenol (via formate) |
| NaIO₄: cis-diols fast, aqueous | Pb(OAc)₄: organic solvent, cleaves trans-diols too |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Molar mass of CrO₃: 99.99 g mol⁻¹.
Level 1: Foundation
- Which reagent oxidises geraniol (an allylic primary alcohol) to geranial without touching a saturated primary alcohol elsewhere in the same molecule?
- What is the product of cyclohexanone with mCPBA?
- How many equivalents of NaIO₄ does glycerol consume?
Answers
- Activated MnO₂.
- ε-Caprolactone (oxepan-2-one), by Baeyer–Villiger oxidation.
- Two: C1–C2 and C2–C3 cleavages, giving 2 HCHO and 1 HCOOH.
Level 2: Part B Style
Practice Q1. 4-Phenylbutan-1-ol is treated with PDC in DMF. The major product is
(a) 4-phenylbutanal (b) 4-phenylbutanoic acid (c) benzoic acid (d) 4-phenylbutan-2-one
Answer: (b)
PDC in DMF oxidises primary alcohols to carboxylic acids; in CH₂Cl₂ it stops at the aldehyde (a). PDC does not cleave the side chain (c), which needs hot KMnO₄, and cannot move the oxygen (d).
Practice Q2. Which reagent converts (E)-hex-3-ene into meso-hexane-3,4-diol?
(a) OsO₄ (cat.), NMO (b) cold dilute alkaline KMnO₄ (c) I₂, AgOAc, wet acetic acid, then KOH (d) mCPBA, then H₃O⁺
Answer: (d)
Net anti addition to an E alkene gives the meso diol. Syn epoxidation followed by backside opening of the epoxide is anti overall. (a), (b) and (c) (Woodward) are all syn and give the racemic (3R,4R)/(3S,4S) diol.
Practice Q3. 2,2-Dimethylcyclopentanone is treated with trifluoroperacetic acid. The major product is
(a) 3,3-dimethyloxan-2-one (b) 6,6-dimethyloxan-2-one (c) 2,2-dimethylcyclopentanol (d) 5,5-dimethyloxolan-2-one
Answer: (b)
Baeyer–Villiger: the quaternary (tertiary alkyl) carbon migrates in preference to the CH₂, so oxygen is inserted between C=O and C(CH₃)₂. The six-membered lactone has the gem-dimethyl carbon attached to the ring oxygen: 6,6-dimethyloxan-2-one (δ-lactone, ring size five → six). (a) is the product of CH₂ migration. (d) has the wrong ring size.
Practice Q4. A compound C₈H₁₄ absorbs one equivalent of H₂ over Pd/C. Ozonolysis followed by Me₂S gives a single compound, C₈H₁₄O₂, which gives a positive iodoform test. The compound is
(a) oct-4-ene (b) 1,2-dimethylcyclohexene (c) 1,2-dimethylcyclohexane (d) 3,4-dimethylcyclohexene
Answer: (b)
C₈H₁₄ has two degrees of unsaturation; one H₂ uptake means one C=C and one ring. A single product containing all eight carbons confirms a ring C=C. 1,2-Dimethylcyclohexene gives CH₃CO(CH₂)₄COCH₃ (octane-2,7-dione), a bis(methyl ketone) (iodoform positive). (d) would give a dialdehyde (iodoform negative); (a) is C₈H₁₆; (c) has no C=C.
Level 3: Part C Style
Practice Q5. A chemist must oxidise 15.0 mmol of cholestan-3β-ol (a secondary alcohol) to the ketone with Jones reagent. In a separate experiment, 1.00 mmol of an unknown acyclic alditol consumes 5.00 mmol of NaIO₄ and liberates 4.00 mmol of formic acid and 2.00 mmol of formaldehyde.
Which statements are correct?
- The minimum amount of CrO₃ needed for the Jones oxidation is about 1.00 g.
- Each chromium atom accepts three electrons in this oxidation.
- The alditol has six carbon atoms.
- The alditol could be glycerol.
(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. Each alcohol loses 2 e⁻; each Cr(VI) gains 3 e⁻. So n(CrO₃) = (2/3) × 15.0 = 10.0 mmol = 10.0 × 99.99 mg = 1.000 g.
- Correct. Cr(VI) → Cr(III).
- Correct. An n-carbon alditol consumes n − 1 IO₄⁻ and gives 2 HCHO and n − 2 HCOOH: n − 1 = 5 and n − 2 = 4 both give n = 6 (a hexitol such as D-glucitol or D-mannitol).
- Wrong. Glycerol (n = 3) would consume 2 IO₄⁻ and give 1 HCOOH.
Practice Q6. Methyl α-D-glucopyranoside (P) and methyl α-D-glucofuranoside (F) are each treated with excess NaIO₄.
Which statements are correct?
- P consumes 2 equivalents of IO₄⁻ and releases 1 equivalent of HCOOH.
- F consumes 2 equivalents of IO₄⁻ and releases 1 equivalent of HCHO.
- P and F can be distinguished by the one-carbon product formed.
- F releases formic acid from C3.
(a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- P (pyranoside): free OH at C2, C3, C4 and C6; ring O links C1 and C5. Adjacent diol bonds: C2–C3 and C3–C4, so 2 IO₄⁻; C3, flanked by two cleaved bonds, leaves as HCOOH. The C6 primary OH is next to C5, which carries the ring oxygen as an ether, so it is not cleaved.
- F (furanoside): ring O links C1 and C4; free OH at C2, C3, C5 and C6. Adjacent diol bonds: C2–C3 and C5–C6, so 2 IO₄⁻; C6 leaves as HCHO. No carbon is flanked by two cleavages, so no HCOOH.
1, 2 and 3 are correct (HCOOH versus HCHO distinguishes them). 4 is wrong: in F, C3 is bonded to C4, which carries no free OH, so C3 becomes an aldehyde carbon in the fragment, not formic acid.
Practice Q7. Consider the sequence: cyclohexene → (i) O₃, CH₂Cl₂, −78 °C; (ii) work-up W → product X.
Which statements are correct?
- With W = Me₂S, X is hexanedial.
- With W = H₂O₂, X is adipic acid (hexanedioic acid).
- With W = NaBH₄, X is hexane-1,6-diol.
- The OsO₄ (cat.)/NaIO₄ combination would give the same X as W = H₂O₂.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
Cyclohexene contains a C=C between two CH carbons in a six-membered ring, so cleavage gives a six-carbon chain with both ends oxygenated.
- Correct. Reductive work-up: OHC(CH₂)₄CHO.
- Correct. Oxidative work-up: HOOC(CH₂)₄COOH.
- Correct. Borohydride reduces the ozonide (or the aldehydes) to the diol.
- Wrong. Lemieux–Johnson gives the dialdehyde, like statement 1, not the diacid.
Quick Revision Table
| Goal | Reagent(s) |
|---|---|
| 1° alcohol → aldehyde | PCC, Collins, PDC/CH₂Cl₂, Swern, Parikh–Doering, DMP, IBX, TPAP/NMO, TEMPO/NaOCl |
| 1° alcohol → acid | Jones, PDC/DMF, KMnO₄; or aldehyde then Pinnick |
| 2° alcohol → ketone | all of the above; Oppenauer |
| Allylic/benzylic alcohol only | MnO₂ |
| 1° over 2° alcohol | TEMPO |
| Aldehyde → acid (alkene-tolerant) | Pinnick: NaClO₂, NaH₂PO₄, 2-methyl-2-butene |
| Epoxide | mCPBA (electron-rich alkene); H₂O₂/NaOH (enone); VO(acac)₂/TBHP (allylic alcohol); Sharpless, Jacobsen, Shi (asymmetric) |
| Syn diol | OsO₄/NMO, cold KMnO₄, Woodward, AD-mix |
| Anti diol | epoxide + H₃O⁺, Prévost |
| C=C cleavage to C=O | O₃/Me₂S, OsO₄–NaIO₄ |
| C=C cleavage to COOH | O₃/H₂O₂, KMnO₄–NaIO₄, hot KMnO₄ |
| Diol cleavage | NaIO₄ (cis fast), Pb(OAc)₄ |
| Terminal alkene → methyl ketone | Wacker (PdCl₂, CuCl₂, O₂) |
| Allylic C–H → C–OH | SeO₂ (+ TBHP) |
| α-CH₂ of ketone → C=O | SeO₂ |
| ArCH₂R → ArCOOH | KMnO₄ (needs benzylic H) |
| Ketone → ester / lactone | Baeyer–Villiger; 3° > 2° ≈ Ph > 1° > Me; retention |
| Sulfide → sulfoxide / sulfone | NaIO₄ / excess mCPBA |
Key Takeaways
What’s Next
- Reductions: Hydrides, Hydrogenation and Dissolving Metals: the downward half of the oxidation-level map.
- Organic, Inorganic, Organometallic and Enzymatic Reagents: the same oxidants classified by reagent family, plus enzymes such as Baeyer–Villiger monooxygenases.
- Chemo-, Regio- and Stereoselective Transformations: choosing among competing sites.
- Electrochemical Cells and the Nernst Equation: the physical-chemistry side of redox.