Skip to content

Reductions: Hydrides, Catalytic Hydrogenation and Dissolving Metals

CSIR NET organic reductions: LiAlH₄, NaBH₄, DIBAL, Luche, boranes, NaBH₃CN; H₂ catalysts, Lindlar; Birch, Wolff–Kishner, Clemmensen, Barton–McCombie, MPV, SmI₂.

  • 17 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: One Hydride, Two Products
  3. Metal Hydride Reagents
  4. Catalytic Hydrogenation
  5. Dissolving-Metal Reductions
  6. Removing Oxygen Completely: C=O → CH₂ and C–OH → C–H
  7. Other Reductions to Know
  8. Hydrogen Uptake and Structure
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: One Hydride, Two Products

Metal Hydride Reagents

Reactivity matrix

The hydride reagents differ in how electron-rich the hydride is and how strongly the metal coordinates (activates) the carbonyl oxygen. The table reads “reduces under normal conditions” (yes), “slowly or only under forcing conditions” (slow), or “does not reduce” (no).

ReagentAldehydeKetoneAcid chlorideEster / lactoneCarboxylic acidAmideNitrileEpoxideAlkyl halide
LiAlH₄yes: 1° alcoholyes: 2° alcoholyes: 1° alcoholyes: 1° alcohol (+ R′OH)yes: 1° alcoholyes: amineyes: 1° amineyes (at less hindered C)yes
NaBH₄ (MeOH/EtOH)yesyesyesslownonononoslow (1° only)
LiBH₄yesyesyesyesnononoyes—
DIBAL-H (−78 °C, 1 equiv)yesyesyesaldehyde—aldehyde (some)aldehyde after hydrolysis—no
BH₃·THFyesyesslowslowyes: fast (1° alcohol)yes: amineyes—no
NaBH₃CN (pH 6–7)slowslow—nonononono—
NaBH(OAc)₃yes (slowly)very slow—nonononono—
LiAlH(OtBu)₃yesyesaldehyde (−78 °C)slownonono——

Points that the table compresses:

  • LiAlH₄ delivers up to four hydrides. Esters need two (the aldehyde formed after the first is reduced faster than the ester), acids need three in total including the deprotonation, and amides need two with loss of the oxygen as an aluminate: RCONR′₂ → RCH₂NR′₂.
  • NaBH₄ is the chemoselective workhorse: aldehydes and ketones are reduced in the presence of esters, acids, amides, nitriles and nitro groups.
  • DIBAL-H is a neutral, Lewis-acidic aluminium hydride. At −78 °C it adds once to an ester; the tetrahedral aluminium acetal is stable cold and collapses to the aldehyde only on work-up. Warm it, or use excess, and the aldehyde is reduced on to the alcohol.
  • Borane is electrophilic: it attacks the most electron-rich carbonyl oxygen. That makes it the reagent of choice for reducing a carboxylic acid in the presence of an ester (the opposite of the LiAlH₄/NaBH₄ pattern).
  • NaBH₃CN and NaBH(OAc)₃ are attenuated by electron-withdrawing ligands. They reduce iminium ions much faster than ketones, so a ketone, an amine and the reagent can be mixed in one pot (reductive amination). NaBH₃CN can release HCN under strongly acidic conditions, one reason NaBH(OAc)₃ is often preferred.

Modified and selective hydride reductions

ReagentSelectivityTypical use
Luche (NaBH₄, CeCl₃·7H₂O, MeOH)1,2-reduction of enones; also reduces ketones in the presence of aldehydes (aldehydes are tied up as methanol acetals under these conditions)allylic alcohols from enones
L-Selectride, K-Selectride (LiBH(sec-Bu)₃)bulky: attacks cyclohexanones from the equatorial direction, giving the axial alcohol; also 1,4-reduction of some enones4-tert-butylcyclohexanone → cis (axial OH)
LiAlH₄, NaBH₄ on cyclohexanonessmall: axial attack, giving the equatorial alcohol4-tert-butylcyclohexanone → trans (equatorial OH)
Red-Al (Na[AlH₂(OCH₂CH₂OMe)₂])soluble LiAlH₄ analogue; trans-hydroalumination of propargylic alcohols(E)-allylic alcohols
Super-Hydride (LiEt₃BH)very nucleophilic; SN2 displacement of halides and sulfonatesdeoxygenation via tosylates
Zn(BH₄)₂chelation-controlled reduction of α- and β-hydroxy/alkoxy ketonesdiastereoselectivity via a chelated intermediate (sense depends on substrate)
Et₃SiH with TFA or BF₃·OEt₂ionic hydrogenation: reduces carbocation-forming substrates (benzylic alcohols, ketals)deoxygenation of benzylic positions
9-BBN, catecholborane, CBS catalystsee the stereoselectivity and asymmetric pages

Catalytic Hydrogenation

Heterogeneous catalysts

H₂ and the substrate adsorb on the metal surface and hydrogen is transferred from the surface to one face of the π-system: syn addition, generally from the less hindered face.

CatalystReducesComment
Pd/C, H₂ (1 atm)alkenes, alkynes (to alkane), nitro, azide, imine; hydrogenolysis of benzyl ethers, benzyl esters, Cbz carbamatesstandard deprotection of OBn and Cbz
PtO₂ (Adams’ catalyst, reduced in situ to Pt)alkenes, aromatic rings under more forcing conditions, ketones
Raney Nialkenes, nitriles, carbonyls; desulfurisation of thioethers and thioacetals
Rh/C, Rh/Al₂O₃, Ru/Caromatic rings (arene → cyclohexane)milder than Pt for arenes
Lindlar (Pd on CaCO₃, poisoned with Pb(OAc)₂ and quinoline)alkyne → (Z)-alkene; stops before the alkene is reducedsyn addition
Pd on BaSO₄ + quinoline–sulfur (Rosenmund)acid chloride → aldehydepoisoned so the aldehyde survives
Ni₂B (P-2 nickel)alkyne → (Z)-alkeneLindlar alternative

Relative ease of catalytic hydrogenation, roughly: acid chloride, alkyne, nitro, alkene, aldehyde, ketone, nitrile ≫ arene, ester, amide, acid. Within alkenes, less substituted alkenes are reduced faster (they adsorb more easily): monosubstituted > 1,1-/cis-disubstituted > trans-disubstituted > trisubstituted > tetrasubstituted.

Homogeneous catalysts

CatalystFeature
Wilkinson’s catalyst RhCl(PPh₃)₃reduces unhindered (mono- and disubstituted) alkenes; leaves C=O, NO₂, CN, esters and trisubstituted alkenes
Crabtree’s catalyst [Ir(cod)(PCy₃)(py)]PF₆reduces even tetrasubstituted alkenes; directed by a coordinating OH or C=O to deliver H₂ cis to it
Ru– and Rh–chiral diphosphine complexes (BINAP, DIPAMP)enantioselective hydrogenation of functionalised alkenes and ketones (Noyori, Knowles)

The catalytic cycles (oxidative addition, alkene insertion, reductive elimination) are on the homogeneous catalysis page.

Transfer hydrogenation and diimide

  • Transfer hydrogenation: a donor such as isopropanol, formic acid/Et₃N or ammonium formate replaces H₂, with Pd, Ru or Ir catalysts.
  • Diimide (HN=NH, generated from KO₂C–N=N–CO₂K + AcOH, or from TsNHNH₂ + heat): delivers H₂ syn to non-polar, symmetrical π-bonds (C=C, C≡C, N=N) through a concerted cyclic transition state; C=O, C≡N and NO₂ are not touched; no hydrogenolysis.

Dissolving-Metal Reductions

Electrons from Li, Na or K in liquid ammonia (deep-blue solvated electrons), with or without an alcohol as proton source, add one at a time to a π* orbital. The sequence is electron, proton, electron, proton.

SubstrateConditionsProductKey point
Internal alkyneNa or Li, NH₃(l)(E)-alkenevinyl radical anion relaxes to the trans geometry before the second electron
AreneLi or Na, NH₃(l), EtOH (Birch)1,4-cyclohexadiene (non-conjugated)kinetic protonation at the centre of the pentadienyl anion
Anisole, toluene (EDG)Birch1-substituted cyclohexa-1,4-diene: EDG ends up on a double bond1-methoxycyclohexa-1,4-diene; hydrolysis gives cyclohex-2-enone (or the 3-enone first)
Benzoic acid (EWG)Birchcyclohexa-2,5-diene-1-carboxylic acid: EWG ends up on an sp³ carbonprotonation ipso and para to the EWG
α,β-Unsaturated ketoneLi, NH₃saturated ketone (via the enolate)the enolate can be trapped by an alkyl halide (reductive alkylation)
EsterNa, EtOH (Bouveault–Blanc)primary alcoholhistoric alternative to LiAlH₄
Ester (two molecules or a diester)Na, xylene or toluene, no proton source (acyloin)α-hydroxy ketoneketyl coupling; good for medium and large rings
Benzyl ether, Ts amideNa, NH₃deprotected alcohol/amine

Other single-electron reductants

  • SmI₂ (Kagan’s reagent): ketyl–olefin couplings, pinacol couplings, removal of α-heteroatoms (α-acetoxy or α-halo ketones → ketones), Barbier-type reactions.
  • Zn or Mg (pinacol coupling): two ketyls dimerise to a 1,2-diol. With low-valent titanium (TiCl₃/LiAlH₄, TiCl₄/Zn) the diol is deoxygenated to an alkene (McMurry coupling).

Removing Oxygen Completely: C=O → CH₂ and C–OH → C–H

ReactionConditionsSuitable forUnsuitable for
ClemmensenZn(Hg), conc. HCl, heatacid-stable aryl alkyl ketones (after Friedel–Crafts acylation)acid-sensitive groups
Wolff–Kishner (Huang Minlon modification)N₂H₄, KOH, ethylene glycol, about 200 °Cbase-stable substrates; via hydrazone and diimide anion, N₂ lostbase-sensitive groups (esters hydrolyse)
Thioacetal + Raney Ni (Mozingo)HS(CH₂)₂SH, BF₃; then Raney Nineutral conditionssulfur poisons other catalysts later
Tosylhydrazone + NaBH₃CN (Caglioti-type)TsNHNH₂, then hydridemild
Barton–McCombiealcohol → xanthate or thiocarbonyl imidazolide; Bu₃SnH, AIBNC–OH → C–H (secondary alcohols best)
Tosylate + LiAlH₄ or LiEt₃BHSN2 hydride1° and unhindered 2°3° (elimination)
Ionic hydrogenation (Et₃SiH, TFA)carbocation then hydridebenzylic and tertiary alcohols

Barton–McCombie mechanism: Bu₃Sn• adds to the thiocarbonyl sulfur; the adduct fragments to give the alkyl radical R• (driven by C=O formation); R• abstracts H from Bu₃SnH, regenerating Bu₃Sn•. It is a radical chain.

Other Reductions to Know

ReactionReagentsResult
Meerwein–Ponndorf–Verley (MPV)Al(OiPr)₃, iPrOHketone → alcohol via a six-membered hydride-transfer TS; acetone distilled off; chemoselective for C=O over C=C
StaudingerPPh₃, then H₂Oazide → amine (iminophosphorane intermediate)
NitroareneFe/HCl, Sn/HCl, SnCl₂, H₂/Pdaniline
NitroareneZn/NH₄ClN-arylhydroxylamine
NitroareneLiAlH₄azo compound (not the aniline)
Imine/iminiumNaBH₃CN, NaBH(OAc)₃, H₂/Pdamine
Corey–Bakshi–Shibata (CBS)chiral oxazaborolidine, BH₃enantioselective ketone reduction
NoyoriRu–BINAP/diamine, H₂enantioselective ketone reduction
Deuterium labellingNaBD₄, LiAlD₄, D₂puts D exactly where H would go; used to probe mechanisms

Hydrogen Uptake and Structure

Catalytic hydrogenation is also an analytical method: the number of moles of H₂ absorbed per mole of compound equals the number of C=C bonds (or twice the number of C≡C) reduced.

$$\text{Degree of unsaturation} = \frac{2C + 2 + N - H - X}{2} = \text{rings} + \pi\text{ bonds}$$

So rings = (degree of unsaturation) − (moles of H₂ absorbed per mole), provided every π bond is reduced under the conditions used. At 0 °C and 1 atm, one mole of an ideal gas occupies 22.414 L.

Memory Tricks

Don’t Confuse

ThisIs not this
LiAlH₄ on an amide: amine (C=O → CH₂)DIBAL on an amide (some cases) or Weinreb amide + LiAlH₄: aldehyde
LiAlH₄ on a nitrile: RCH₂NH₂DIBAL on a nitrile: RCHO after hydrolysis
NaBH₄: ketone over esterBH₃·THF: acid over ester
NaBH₄ on an enone: 1,2 + 1,4 mixtureLuche (NaBH₄/CeCl₃): 1,2 only
Lindlar or P-2 Ni: (Z)-alkeneNa/NH₃: (E)-alkene
Birch on anisole: OMe on C=CBirch on benzoic acid: COOH on sp³ carbon
Clemmensen (acid)Wolff–Kishner (base)
MPV (reduction, iPrOH donor)Oppenauer (oxidation, acetone acceptor)
Wilkinson: least hindered alkeneCrabtree: hindered alkenes, OH-directed
Pd/C, H₂: cleaves OBnLindlar: does not (and leaves alkenes)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Molar masses: LiAlH₄ 37.95 g mol⁻¹, C₁₀H₁₆ 136.24 g mol⁻¹. Molar volume of an ideal gas at 0 °C, 1 atm: 22.414 L.

Level 1: Foundation

  1. What does DIBAL-H (1 equiv, −78 °C) give from methyl benzoate after aqueous work-up?
  2. What is the stereochemistry of the alkene from hex-3-yne with Na in liquid ammonia?
  3. Which reagent reduces a carboxylic acid selectively in the presence of a methyl ester?
Answers
  1. Benzaldehyde.
  2. (E)-hex-3-ene.
  3. BH₃·THF (or BH₃·SMe₂).

Level 2: Part B Style

Practice Q1. Methyl 4-oxocyclohexane-1-carboxylate is treated with NaBH₄ in methanol at 0 °C. The product is

(a) 4-(hydroxymethyl)cyclohexan-1-one (b) methyl 4-hydroxycyclohexane-1-carboxylate (c) 4-(hydroxymethyl)cyclohexan-1-ol (d) methyl cyclohexanecarboxylate

Answer: (b)

NaBH₄ reduces the ketone and leaves the ester. (a) would need the reverse selectivity; (c) needs LiAlH₄; (d) is a full deoxygenation (Wolff–Kishner type).

Practice Q2. Birch reduction (Li, NH₃(l), tBuOH) of 4-methylanisole gives mainly

(a) 1-methoxy-4-methylcyclohexa-1,4-diene (b) 1-methoxy-4-methylcyclohexa-1,3-diene (c) 3-methoxy-6-methylcyclohexa-1,4-diene with both substituents on sp³ carbons (d) 4-methylcyclohexanone

Answer: (a)

Both OMe and CH₃ are electron donors; donors stay on the double bonds. The two new CH₂ groups (C3 and C6) are para to each other. The product is the non-conjugated diene, not the 1,3-diene (b). (d) would need hydrolysis and further reduction.

Practice Q3. Which reagent combination converts 4-tert-butylcyclohexanone mainly into cis-4-tert-butylcyclohexanol (axial OH)?

(a) NaBH₄, EtOH (b) LiAlH₄, ether (c) L-Selectride, THF, −78 °C (d) H₂, Pd/C

Answer: (c)

The bulky trialkylborohydride attacks from the less hindered equatorial direction, placing the OH axial (cis to the equatorial tert-butyl group in the 1,4-relationship). Small hydrides (a, b) attack axially and give mainly the equatorial (trans) alcohol. (d) does not normally reduce a ketone under mild conditions.

Practice Q4. Which statement about the reduction of hept-2-yn-1-ol is correct?

(a) Lindlar catalyst and H₂ give (E)-hept-2-en-1-ol (b) Red-Al gives (E)-hept-2-en-1-ol (c) H₂ over Pd/C at 1 atm stops at the alkene (d) NaBH₄ gives (Z)-hept-2-en-1-ol

Answer: (b)

Red-Al hydroaluminates propargylic alcohols in a trans fashion (via an alkoxide-directed delivery), giving (E)-allylic alcohols after work-up. Lindlar gives the Z isomer (a is wrong); Pd/C reduces the alkyne to the alkane (c is wrong); NaBH₄ does not reduce isolated alkynes (d is wrong).

Level 3: Part C Style

Practice Q5. A chemist needs to reduce 20.0 mmol of ethyl benzoate to benzyl alcohol with LiAlH₄. In a second experiment, 1.36 g of a hydrocarbon C₁₀H₁₆ absorbs 448 mL of H₂ (measured at 0 °C and 1 atm) over PtO₂.

Which statements are correct?

  1. The stoichiometric minimum of LiAlH₄ is about 0.38 g.
  2. Ethanol is also formed in the reduction.
  3. The hydrocarbon contains two C=C bonds and one ring.
  4. The hydrocarbon could be limonene.

(a) 1, 2, 3 and 4 (b) 1, 2 and 3 only (c) 3 and 4 only (d) 1 and 3 only

Answer: (a) 1, 2, 3 and 4
  1. Correct. Each ester needs two hydrides (ester → aldehyde → alcohol), and each LiAlH₄ supplies four. So n(LiAlH₄) = 20.0/2 = 10.0 mmol = 10.0 × 37.95 mg = 0.380 g. In practice an excess is used.
  2. Correct. The ethoxide leaving group is liberated and protonated on work-up.
  3. Correct. 1.36 g / 136.24 g mol⁻¹ = 10.0 mmol of hydrocarbon. 0.448 L / 22.414 L mol⁻¹ = 20.0 mmol H₂, i.e. 2 mol H₂ per mole: two C=C bonds. Degree of unsaturation of C₁₀H₁₆ = (22 − 16)/2 = 3, so 3 − 2 = one ring.
  4. Correct. Limonene (1-methyl-4-(prop-1-en-2-yl)cyclohexene) is a monocyclic C₁₀H₁₆ terpene with two C=C bonds.

Practice Q6. Cyclohex-2-en-1-one is treated in separate experiments with (I) NaBH₄/CeCl₃ in MeOH; (II) Li in NH₃(l), then CH₃I; (III) H₂, Pd/C (1 equiv H₂); (IV) LiAlD₄ in ether, then H₂O.

Which statements are correct?

  1. (I) gives cyclohex-2-en-1-ol.
  2. (II) gives 2-methylcyclohexan-1-one.
  3. (III) gives mainly cyclohexanone.
  4. (IV) gives cyclohex-2-en-1-ol carrying deuterium on the carbinol carbon (C1) and OH (not OD).

(a) 1, 2, 3 and 4 (b) 1, 2 and 3 only (c) 1 and 4 only (d) 2 and 3 only

Answer: (a) 1, 2, 3 and 4
  1. Correct. Luche conditions: 1,2-reduction.
  2. Correct. Dissolving-metal reduction of an enone gives the lithium enolate with the negative charge at C2 (the former α-carbon); alkylation with CH₃I occurs there.
  3. Correct. Palladium hydrogenates the conjugated C=C faster than the ketone C=O.
  4. Correct. LiAlH₄ (and LiAlD₄) usually reduces simple cyclic enones mainly 1,2. The deuteride is delivered to the carbonyl carbon; the oxygen is protonated by H₂O on work-up, so the label is C–D, not O–D. (Some 1,4-reduction can occur, but the main product is the allylic alcohol.)

Practice Q7. Compound K, C₉H₁₀O, shows a strong IR band near 1685 cm⁻¹ (conjugated ketone) and gives a positive iodoform test; its ¹H NMR shows a para-disubstituted ring. K is converted into L (C₉H₁₂) by Zn(Hg)/HCl, and into M (C₉H₁₂O) by NaBH₄.

Which statements are correct?

  1. K is 1-(4-methylphenyl)ethan-1-one (4-methylacetophenone).
  2. L is 1-ethyl-4-methylbenzene.
  3. M is formed as a racemate.
  4. Wolff–Kishner reduction of K would give a different product from L.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Degree of unsaturation 5 (benzene ring + C=O). A conjugated methyl ketone on a para-disubstituted ring with the remaining CH₃: 4-CH₃C₆H₄COCH₃.
  2. Correct. Clemmensen converts C=O into CH₂: 4-CH₃C₆H₄CH₂CH₃ (C₉H₁₂).
  3. Correct. NaBH₄ is achiral and the two faces of the ketone are enantiotopic: racemic 1-(4-methylphenyl)ethanol.
  4. Wrong. Clemmensen and Wolff–Kishner both reduce C=O to CH₂; only the conditions (acid versus base) differ.

Quick Revision Table

GoalReagent
Ketone/aldehyde → alcohol, ester untouchedNaBH₄
Ester, acid, amide, nitrile all reducedLiAlH₄ (amide → amine)
Ester or nitrile → aldehydeDIBAL-H, 1 equiv, −78 °C
Acid chloride → aldehydeLiAlH(OtBu)₃, −78 °C; Rosenmund
Acid in presence of esterBH₃·THF
Enone → allylic alcoholLuche (NaBH₄/CeCl₃)
Enone → saturated ketoneLi/NH₃; H₂/Pd; L-Selectride (some)
Cyclohexanone → equatorial OH / axial OHsmall hydride / L-Selectride
Reductive aminationNaBH₃CN (pH 6–7), NaBH(OAc)₃
Alkyne → Z / E alkeneLindlar or P-2 Ni / Na, NH₃(l)
Propargylic alcohol → E-allylic alcoholRed-Al
Least hindered alkene onlyWilkinson’s catalyst; diimide
Hindered alkene, OH-directedCrabtree’s catalyst
Arene → 1,4-dieneBirch: EDG on C=C, EWG on sp³
C=O → CH₂Clemmensen (acid), Wolff–Kishner (base), thioacetal/Raney Ni (neutral)
C–OH → C–HBarton–McCombie (Bu₃SnH, AIBN); tosylate + LiEt₃BH
Ketone → alcohol, C=C untouchedMPV (Al(OiPr)₃, iPrOH)
ArNO₂ → ArNH₂Fe/HCl, Sn/HCl, SnCl₂, H₂/Pd (not LiAlH₄)
Azide → amineH₂/Pd, LiAlH₄, Staudinger
Rings from H₂ uptakerings = DoU − mol H₂ per mol

Key Takeaways

What’s Next