Skip to content

Hydrocarbon Ligands: Alkyls, Carbenes and π-Complexes

CSIR NET chemistry: M–C bond synthesis, alkyl stability, agostic bonds, Fischer vs Schrock carbenes, alkene, alkyne, allyl, metallocene and arene complexes.

  • 18 min read
  • Updated
On this page · 19 sections
  1. Prerequisites
  2. The Hook: A Molecule Nobody Expected
  3. Making Metal–Carbon Bonds
  4. Metal Alkyls
  5. Carbene and Carbyne Complexes
  6. Alkene Complexes: The Dewar–Chatt–Duncanson Model
  7. Alkyne Complexes
  8. Allyl Complexes
  9. Diene and Cyclobutadiene Complexes
  10. Cyclopentadienyl Complexes and Metallocenes
  11. Arene Complexes
  12. Fluxional Organometallics
  13. Memory Tricks
  14. Don’t Confuse
  15. Common Mistakes
  16. Practice
  17. Quick Revision Table
  18. Key Takeaways
  19. What’s Next

Prerequisites

The Hook: A Molecule Nobody Expected

Making Metal–Carbon Bonds

The same handful of routes makes almost every organometallic compound:

RouteExample
Salt metathesis (metal halide + main-group organometallic: RLi, RMgX, AlR₃, NaCp)FeCl₂ + 2 NaC₅H₅ → (η⁵-C₅H₅)₂Fe + 2 NaCl
Nucleophilic metal anion + alkyl halideNa[Mn(CO)₅] + CH₃I → CH₃Mn(CO)₅ + NaI
Oxidative additiontrans-IrCl(CO)(PPh₃)₂ + CH₃I → IrCl(I)(CH₃)(CO)(PPh₃)₂
Insertion of an alkene or alkyne into M–HM–H + CH₂=CH₂ → M–CH₂CH₃
Nucleophilic attack on a coordinated ligand(CO)₆W + PhLi → [(CO)₅W=C(O)Ph]⁻ (route to Fischer carbenes)
Direct reaction of metal with ligandNi + 4 CO; metal-vapour synthesis: Cr atoms + 2 C₆H₆ → (η⁶-C₆H₆)₂Cr
Ligand substitutionCr(CO)₆ + C₆H₆ (heat) → (η⁶-C₆H₆)Cr(CO)₃ + 3 CO

The reactions in the bottom half of the table are developed as reaction types on the reactions page.

Metal Alkyls

A metal alkyl M–R is a 1-electron X ligand (neutral method) or a 2-electron R⁻ (ionic method). Transition-metal alkyls were long thought to be intrinsically unstable. The truth is that M–C bonds are not unusually weak; the problem is kinetic: easy, low-energy decomposition pathways.

Decomposition pathways

  1. β-Hydride elimination: the dominant route. It needs a hydrogen on the β-carbon, a vacant site cis to the alkyl, and a syn-coplanar M–C–C–H arrangement. Product: a metal hydride and an alkene.
  2. α-Elimination: transfer of an α-hydrogen, giving an alkylidene (important for early metals).
  3. Reductive elimination of R–R or R–H from a metal with two such ligands.
  4. Homolysis of the M–C bond.

Recipes for stable alkyls

StrategyExamples
No β-hydrogenCH₃, CH₂Ph (benzyl), CH₂CMe₃ (neopentyl), CH₂SiMe₃, aryl
β-H present but syn-coplanar geometry impossible1-norbornyl (would give an anti-Bredt alkene)
No vacant cis sitecoordinatively saturated 18-electron complexes; CH₃CH₂Mn(CO)₅ is far more stable than a 16-electron ethyl
β-Elimination product unstableperfluoroalkyls (strong C–F bonds; M–CF₃ is also stronger than M–CH₃)
Chelate constraintmetallacyclopentanes resist β-H elimination because the ring cannot reach the required geometry easily

W(CH₃)₆ and Ti(CH₂Ph)₄ are stable precisely because they have no β-hydrogens, even though they are far below 18 electrons.

Agostic interactions

In an electron-deficient complex a C–H bond on a ligand can bend toward the metal and donate its σ electrons, forming a three-centre two-electron M···H–C interaction. Brookhart and Green introduced the term “agostic” in 1983. Signs:

  • ¹H NMR: the agostic H shifts strongly upfield.
  • ¹J(C–H) is reduced (the C–H bond is weakened).
  • IR: ν(C–H) lowered.
  • X-ray or neutron diffraction: short M···H distance, distorted angles.

A β-agostic alkyl is a snapshot of the transition state for β-hydride elimination; α-agostic interactions assist alkene insertion in Ziegler–Natta polymerisation (see Homogeneous Catalysis).

Carbene and Carbyne Complexes

A carbene complex has a metal–carbon double bond, M=CR₂. Two limiting types behave in opposite ways.

FeatureFischer carbeneSchrock carbene (alkylidene)
Example(CO)₅W=C(OMe)PhTa(=CHCMe₃)(CH₂CMe₃)₃
Metalmiddle/late, low oxidation state (Cr, Mo, W, Fe in 0)early, high oxidation state (Ti, Ta, Mo, W in high OS)
Co-ligandsπ-acceptors (CO)donors (alkyl, Cp, alkoxide, imido)
Substituents on carbene Cheteroatom (OR, NR₂) that donates π densityH or alkyl
Bonding picturesinglet carbene σ-donates; weak back-donation; heteroatom π stabilisestriplet carbene and triplet metal fragment form a covalent σ + π double bond
Polarity of M=CM(δ−)=C(δ+)M(δ+)=C(δ−)
Reactivity at carbene Celectrophilic: attacked by nucleophiles (amines replace OMe)nucleophilic: Wittig-like, reacts with C=O of ketones and esters
Counting (neutral)2 e⁻, neutral L; OS unchanged2 e⁻, but ionic method treats it as CR₂²⁻ (4 e⁻) and raises OS by 2

Syntheses

  • Fischer (1964): W(CO)₆ + PhLi gives the acyl anion [(CO)₅W–C(O)Ph]⁻ ↔ [(CO)₅W=C(O⁻)Ph]; O-alkylation with a Meerwein salt (Me₃O⁺BF₄⁻) gives (CO)₅W=C(OMe)Ph.
  • Schrock (1970s): attempts to make Ta(CH₂CMe₃)₅ gave instead Ta(=CHCMe₃)(CH₂CMe₃)₃ and neopentane, by α-hydrogen abstraction in the crowded, high-valent molecule.

Tebbe’s reagent, Cp₂Ti(μ-CH₂)(μ-Cl)AlMe₂, releases the Schrock methylidene Cp₂Ti=CH₂, which methylenates even esters (R–C(O)OR′ → R–C(=CH₂)OR′), something the Wittig reagent does poorly.

N-Heterocyclic carbenes (NHCs)

Arduengo isolated a stable free NHC (an imidazol-2-ylidene) in 1991. NHCs are carbenes stabilised by two flanking nitrogen π-donors. As ligands they behave like very strong σ-donor phosphine replacements with modest π acidity; they bind tightly and resist dissociation. Second-generation Grubbs metathesis catalysts use one.

Carbynes

A metal carbyne (alkylidyne) M≡CR has one σ and two π bonds. It counts 3 electrons in the neutral method. Fischer-type carbynes are made from Fischer carbenes by abstracting the OR group; Schrock alkylidynes of Mo and W catalyse alkyne metathesis.

Alkene Complexes: The Dewar–Chatt–Duncanson Model

Zeise’s salt, K[PtCl₃(η²-C₂H₄)]·H₂O, is one of the earliest known organometallic compounds (prepared in the 19th century). Its structure shows Pt(II), square planar, with the ethylene C=C axis perpendicular to the PtCl₃ plane.

The Dewar–Chatt–Duncanson (DCD) model describes alkene bonding in two parts, exactly parallel to CO:

  1. σ donation from the filled C=C π orbital into an empty metal orbital.
  2. π back-donation from a filled metal d orbital into the empty C=C π* orbital.
graph TD
    A["Weak back-donation
(Pt(II), cationic, electron-poor metal)"] --> B["pi-complex:
C=C slightly longer,
substituents nearly planar,
carbons near sp2"] C["Strong back-donation
(electron-rich, low-valent metal;
electron-poor alkene such as C2F4)"] --> D["metallacyclopropane:
C-C near single bond,
substituents bent back,
carbons near sp3"]

Both components weaken the C=C bond: donation removes bonding π density, back-donation fills π*. Observable consequences:

ObservableChange on coordination
C=C lengthincreases (slightly in Zeise’s salt; strongly in metallacyclopropane-like complexes)
ν(C=C)decreases
Substituentsbend back away from the metal
¹H and ¹³C NMR of alkeneshift upfield, more for strong back-donation
¹J(C–H)decreases toward the sp³ value as back-donation grows
Rotation about the M–alkene axispossible, with a barrier measurable by variable-temperature NMR

Which alkenes bind best? Electron-poor alkenes (C₂F₄, tetracyanoethylene, maleic anhydride) bind more strongly to electron-rich metals, because back-donation dominates. Strained alkenes (norbornene) also bind well. Steric bulk weakens binding: monosubstituted alkenes generally bind better than tetrasubstituted ones.

Trans effect. In Zeise’s salt the Pt–Cl bond trans to ethylene is a little longer than the cis Pt–Cl bonds, and the trans Cl is labile. Ethylene is a strong trans-directing ligand because it is a good π-acceptor.

Alkyne Complexes

An alkyne has two orthogonal π systems. It can use one (2-electron donor, like an alkene) or both (4-electron donor, in electron-poor early-metal complexes). Coordination bends the substituents back: C≡C–R angles of roughly 140–150° are common, and the C–C bond lengthens toward a double bond.

Co₂(CO)₈ reacts with alkynes to give Co₂(CO)₆(μ-η²:η²-RC≡CR): the alkyne lies perpendicular to the Co–Co bond and bridges both metals (a dimetallatetrahedrane, by the isolobal analogy). The complex protects an alkyne and stabilises an adjacent carbocation (Nicholas reaction), and is the intermediate of the Pauson–Khand reaction (alkyne + alkene + CO → cyclopentenone).

Allyl Complexes

The allyl group C₃H₅ binds in two modes:

ModeNeutral countIonic countExample
η¹ (σ-allyl)12(η¹-C₃H₅)Mn(CO)₅
η³ (π-allyl)34(η³-C₃H₅)Mn(CO)₄; [(η³-C₃H₅)PdCl]₂

Classic interconversion: Na[Mn(CO)₅] + CH₂=CHCH₂Cl gives the η¹-allyl, which loses one CO on heating or irradiation to give the η³-allyl. The count stays 18 throughout: (7 + 1 + 10) → (7 + 3 + 8).

Bonding. The three allyl π MOs are ψ₁ (bonding, no node), ψ₂ (non-bonding, node at the central carbon) and ψ₃ (antibonding). In η³-allyl, ψ₁ and ψ₂ donate and ψ₃ accepts back-donation. The C–C bonds are equal, and the C₃ plane is tilted, not parallel to the metal coordination plane.

¹H NMR. In a static η³-allyl, the five protons fall into three sets: the central H, two syn H (cis to the central-carbon H) and two anti H (trans to it). Anti protons are usually further upfield. If the allyl flips η³ → η¹ → η³, rotation about the C–C single bond in the η¹ form exchanges syn and anti protons; at higher temperature the spectrum collapses to an AX₄ pattern (1 central H, 4 equivalent terminal H).

Diene and Cyclobutadiene Complexes

Butadiene binds η⁴ in (η⁴-C₄H₆)Fe(CO)₃ (8 + 4 + 6 = 18). The central C–C bond shortens and the terminal C–C bonds lengthen, because back-donation fills the butadiene ψ₃ orbital, which is bonding between C2 and C3 and antibonding between C1 and C2.

Cyclobutadiene, antiaromatic and unstable when free, is stable as (η⁴-C₄H₄)Fe(CO)₃. Coordination makes the ring square and lets it undergo electrophilic substitution. Releasing it by oxidation gives free cyclobutadiene for trapping reactions.

Cyclopentadienyl Complexes and Metallocenes

The cyclopentadienyl ligand (Cp, C₅H₅) is most often η⁵ (5 electrons neutral, 6 as C₅H₅⁻, an aromatic sextet). It can slip to η³ or η¹ when a metal needs a vacant site.

Ferrocene

  • Synthesis: FeCl₂ + 2 NaCp in THF (NaCp from Na and cyclopentadiene, itself obtained by cracking dicyclopentadiene); or FeCl₂ + 2 C₅H₆ + 2 Et₂NH → Cp₂Fe + 2 [Et₂NH₂]Cl.
  • Structure: two parallel η⁵ rings, all ten C–C bonds equal. The barrier to ring rotation is very small; the gas-phase structure is eclipsed (D₅h), and the solid-state conformation depends on temperature.
  • Properties: orange, air-stable, sublimes; a single sharp ¹H NMR signal (the ten H are equivalent, near δ 4.2).
  • Electrochemistry: reversibly oxidised to the blue ferrocenium ion [Cp₂Fe]⁺ (17 electrons); the Fc⁺/Fc couple is the standard internal reference in non-aqueous electrochemistry.
  • Aromatic reactivity: undergoes Friedel–Crafts acylation much faster than benzene. Direct nitration or halogenation fail because the oxidant oxidises iron to ferrocenium first.

MO picture and the metallocene series

In D₅d/D₅h symmetry the metal d orbitals of a metallocene split into three sets. Ordered by energy, the frontier region is:

$$e_{2g}\ (d_{xy}, d_{x^2-y^2}) \approx a_{1g}\ (d_{z^2})\ \ <\ \ e_{1g}^*\ (d_{xz}, d_{yz})$$

The a₁g and e₂g orbitals are nearly non-bonding (slightly bonding through δ back-donation for e₂g), and hold six electrons in ferrocene. The e₁g* pair is antibonding between metal and ring. Electrons beyond 18 go into e₁g*, lengthening the M–C bonds and making the complex easy to oxidise.

MetalloceneValence e⁻Unpaired e⁻Note
Cp₂V153air-sensitive
Cp₂Cr162
Cp₂Mn175 (high spin)weak field, largely ionic, an exception
Cp₂Fe180ferrocene, very stable
Cp₂Co191strong reductant, oxidised to 18 e⁻ [Cp₂Co]⁺
Cp₂Ni202two electrons in e₁g*

Cobaltocenium, [Cp₂Co]⁺, is isoelectronic with ferrocene and is as robust. Nickelocene readily loses electrons or converts one ring to η³ or η¹ to escape its two antibonding electrons.

Beyond ferrocene

  • Cp* (C₅Me₅) is a stronger donor and much bulkier than Cp; it stabilises reactive species (Cp*₂Lu–CH₃ on the reactions page).
  • Bent metallocenes Cp₂MX₂ (M = Ti, Zr, Hf): the rings tilt to make room for two or three further ligands in the wedge between them. Cp₂ZrCl₂ is the precursor of polymerisation catalysts; Cp₂Zr(H)Cl (Schwartz’s reagent) hydrozirconates alkenes.
  • Half-sandwich (“piano-stool”) complexes: CpMn(CO)₃, CpFe(CO)₂Cl, CpCo(CO)₂.
  • Ring slip η⁵ → η³ frees two electrons’ worth of coordination space and allows associative substitution; it is much easier for indenyl (the indenyl effect, on the reactions page).

Arene Complexes

Bis(benzene)chromium, (η⁶-C₆H₆)₂Cr (6 + 12 = 18), was made by E. O. Fischer and Hafner by reductive Friedel–Crafts synthesis: CrCl₃ + Al + AlCl₃ in benzene gives [(C₆H₆)₂Cr]⁺, which is reduced to the neutral sandwich. Metal-vapour synthesis (co-condensing Cr atoms with benzene) also works. All C–C bonds are equal; the compound is far more air-sensitive than ferrocene.

(η⁶-Arene)Cr(CO)₃ complexes, made by heating Cr(CO)₆ with the arene, are synthetically useful because the Cr(CO)₃ unit withdraws electron density from the ring:

  • the ring becomes susceptible to nucleophilic attack (nucleophilic aromatic substitution of chloride, addition of carbanions);
  • ring and benzylic hydrogens become more acidic;
  • the Cr(CO)₃ group blocks one face, so reagents attack from the opposite face (stereocontrol).

Fluxional Organometallics

A molecule is fluxional when it rearranges between equivalent structures faster than the NMR time scale. Three standard cases:

  • Fe(CO)₅: one ¹³C NMR signal for the five CO ligands, because Berry pseudorotation exchanges axial and equatorial sites (IR, a faster technique, still shows two bands).
  • (η⁵-C₅H₅)(η¹-C₅H₅)Fe(CO)₂: at room temperature the ¹H NMR spectrum shows two singlets of equal intensity, one for each ring. The η¹ ring “whizzes”: the Fe–C σ bond migrates around the ring by 1,2-shifts, averaging its five protons. At low temperature the η¹ ring’s signals separate into the expected pattern for a σ-bonded C₅H₅ (1 : 2 : 2).
  • η³-Allyl syn/anti exchange via η¹ (above).

Memory Tricks

Don’t Confuse

ThisvsThat
Fischer carbene: electrophilic C, heteroatom substituentSchrock alkylidene: nucleophilic C, H/alkyl substituents
η¹-allyl: 1 e⁻ (neutral), σ-bondedη³-allyl: 3 e⁻, syn and anti protons
η⁵-Cp: 5 e⁻ neutral / 6 e⁻ as Cp⁻η¹-Cp: 1 e⁻, fluxional “ring whizzer”
Agostic C–H (intramolecular, 3c–2e, C–H intact)Oxidative addition of C–H (bond broken, M(H)(R))
Ferrocene (18 e⁻, diamagnetic)Cobaltocene (19 e⁻, reducing), nickelocene (20 e⁻, 2 unpaired)
Zeise’s salt: C₂H₄ perpendicular to PtCl₃ planeEthylene “in plane” (wrong for Zeise’s salt)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the hapticity and neutral electron count of the allyl group in [(C₃H₅)PdCl]₂?
  2. Which metallocene among Cp₂Fe, Cp₂Co and Cp₂Ni has exactly one unpaired electron?
  3. Is the carbene carbon in (CO)₅Cr=C(OMe)CH₃ electrophilic or nucleophilic?
Answers
  1. η³, 3 electrons. Each Pd: 10 + 3 (allyl) + 1 (one μ-Cl acting as a 1 e⁻ X ligand) + 2 (the other μ-Cl donating a lone pair as L) = 16, as expected for Pd(II) d⁸.
  2. Cp₂Co (19 electrons, one in e₁g*).
  3. Electrophilic. Low-valent Cr(0), π-acceptor CO co-ligands and an OMe substituent: a Fischer carbene.

Level 2: Part B Style

Practice Q1. Which of the following alkyl complexes is expected to be the most resistant to β-hydride elimination?

(a) Cp₂Zr(Cl)(CH₂CH₂CH₃) (b) Ti(CH₂CMe₃)₄ (c) (PPh₃)₂Pt(CH₂CH₃)₂ (d) Cp₂Ti(CH₂CH₃)Cl

Answer: (b)

Neopentyl (CH₂CMe₃) has no hydrogen on the β-carbon (the β-carbon is the quaternary CMe₃). The other three have β-H and open coordination sites (16-electron or less).

Practice Q2. In K[PtCl₃(C₂H₄)], the correct description is:

(a) Pt(0), ethylene in the PtCl₃ plane (b) Pt(II), C=C axis perpendicular to the PtCl₃ plane, 16 electrons (c) Pt(IV), metallacyclopropane, 18 electrons (d) Pt(II), η¹-ethyl ligand

Answer: (b)

Three Cl⁻ and an overall −1 charge make Pt(II), d⁸, square planar. Count (ionic): 8 + 3 × 2 + 2 = 16. Ethylene is η², perpendicular to the coordination plane for best overlap with filled Pt d orbitals.

Practice Q3. The reaction of Na[Mn(CO)₅] with allyl chloride, followed by heating, gives a product with the formula:

(a) (η¹-C₃H₅)Mn(CO)₅ (b) (η³-C₃H₅)Mn(CO)₄ (c) (η³-C₃H₅)Mn(CO)₅ (d) (η⁵-C₃H₅)Mn(CO)₃

Answer: (b)

The first product, (η¹-allyl)Mn(CO)₅, is 18 electrons (7 + 1 + 10). On heating it loses one CO and the allyl becomes η³: 7 + 3 + 8 = 18. (c) would be 20 electrons; (d) is meaningless, since allyl has only three carbons.

Practice Q4. Which statement about (η⁶-C₆H₆)Cr(CO)₃ is incorrect?

(a) It obeys the 18-electron rule. (b) The arene ring is activated toward nucleophilic attack. (c) The arene ring becomes more electron-rich than free benzene, so electrophilic substitution is accelerated. (d) Reagents tend to approach the ring from the face opposite to Cr(CO)₃.

Answer: (c)

Cr 6 + arene 6 + 3 CO 6 = 18, so (a) is correct. The Cr(CO)₃ unit is net electron-withdrawing; the ring becomes electron-poor, which favours nucleophilic, not electrophilic, attack. (d) is the steric face-blocking effect.

Level 3: Part C Style

Practice Q5. The ¹H NMR spectrum of (C₅H₅)₂Fe(CO)₂ at room temperature shows two singlets of equal intensity. On cooling, one singlet is unchanged while the other broadens and splits into three signals with relative intensities 1 : 2 : 2. Which statements are correct?

  1. One ring is η⁵ and the other η¹.
  2. The η¹ ring is fluxional, with the Fe–C σ bond migrating around the ring.
  3. The 1 : 2 : 2 pattern arises from the CH bonded to Fe and two pairs of olefinic CH.
  4. Both rings are η⁵, making the complex 23-electron.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2 and 4 only (d) 4 only

Answer: (a) 1, 2 and 3 only

Electron count with one η⁵ and one η¹ ring: 8 + 5 + 1 + 4 = 18. Two η⁵ rings would give 8 + 10 + 4 = 22 (not 23), so statement 4 is wrong in both the hapticity and the count.

The η⁵ ring gives a sharp singlet at all temperatures. The η¹ ring at low temperature shows one sp³ CH bonded to Fe (1 H) and two pairs of vinylic H (2 H, 2 H). At room temperature rapid 1,2-shifts make all five η¹-ring protons equivalent.

Practice Q6. Consider these statements about metallocenes Cp₂M (M = V to Ni):

  1. The M–C distance in Cp₂Ni is longer than in Cp₂Fe.
  2. Cp₂Co is a strong one-electron reducing agent.
  3. Cp₂Cr has two unpaired electrons.
  4. Cobaltocenium, [Cp₂Co]⁺, is paramagnetic.

Which are correct?

(a) 1, 2 and 3 only (b) 2 and 4 only (c) 1 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. Nickelocene has two electrons in the antibonding e₁g* set, so the M–ring bonding weakens and the distance grows.
  2. Correct. Losing the single e₁g* electron gives the 18-electron cobaltocenium ion.
  3. Correct. 16 electrons: four d electrons in e₂g and a₁g, two unpaired.
  4. Wrong. [Cp₂Co]⁺ is 18-electron, isoelectronic with ferrocene, and diamagnetic.

Practice Q7. Two alkene complexes are compared by X-ray diffraction: complex X, a Pt(II) cation with ethylene, and complex Y, a Pt(0) phosphine complex of C₂(CN)₄ (tetracyanoethylene). Which conclusions are consistent with the DCD model?

  1. The C–C bond of the alkene is longer in Y than in X.
  2. The CN substituents in Y are bent away from Pt more than the H atoms in X.
  3. The alkene carbons in Y are closer to sp³ than those in X.
  4. Y is better described as a π-complex and X as a metallacyclopropane.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

Y pairs an electron-rich Pt(0) with a very electron-poor alkene: back-donation into π* is large, the C–C bond lengthens toward a single bond, substituents bend back, and the carbons rehybridise toward sp³. That is the metallacyclopropane limit, so statement 4 has the two descriptions reversed. X, a cationic Pt(II) complex of ethylene, is the π-complex end.

Quick Revision Table

IdeaFact
M–C bond routessalt metathesis, metal anion + RX, OA, insertion, attack on ligand, metal vapour
Alkyl instabilitykinetic: β-H elimination (β-H, cis vacant site, syn-coplanar)
Stable alkylsCH₃, CH₂Ph, CH₂CMe₃, CH₂SiMe₃, aryl, 1-norbornyl, CF₃
Agostic3c–2e M···H–C; upfield ¹H, lower J(CH)
Fischer carbenelow OS, CO co-ligands, OR/NR₂ on C, electrophilic C
Schrock carbenehigh OS early metal, H/alkyl on C, nucleophilic C; α-H abstraction
NHCstrong σ-donor, Arduengo 1991
DCD modelπ → M donation + M → π* back-donation; C=C lengthens
Zeise’s saltPt(II), 16 e⁻, C₂H₄ ⊥ PtCl₃ plane
Alkyne2 or 4 e⁻; Co₂(CO)₆(alkyne), Pauson–Khand
Allylη¹ 1 e⁻, η³ 3 e⁻; syn/anti H; η³–η¹–η³ exchange
Ferrocene1951 discovery, 18 e⁻, Fe(II) d⁶, Fc⁺/Fc reference, acylation
Metallocene countsV 15, Cr 16, Mn 17, Fe 18, Co 19, Ni 20
Arenes(C₆H₆)₂Cr 18 e⁻; Cr(CO)₃ makes ring electrophilic
FluxionalFe(CO)₅ (one ¹³C), CpFe(CO)₂(η¹-Cp) ring whizzer

Key Takeaways

What’s Next