Skip to content

Electron Counting, Metal Carbonyls and Acceptor Ligands

CSIR NET chemistry: 18-electron rule, neutral and ionic counting, carbonyl synthesis and bonding, IR of CO, nitrosyls, phosphines, hydrides and H2 complexes.

  • 21 min read
  • Updated
On this page · 18 sections
  1. Prerequisites
  2. The Hook: A Metal That Turns Into a Gas
  3. What Counts as Organometallic
  4. The 18-Electron Rule
  5. Counting Electrons: Two Methods
  6. Metal Carbonyls: Synthesis
  7. Bonding in Metal Carbonyls: The Synergic Model
  8. Nitrosyl Complexes
  9. Phosphine Ligands
  10. Metal Hydrides and Dihydrogen Complexes
  11. Metal–Metal Bonds and the Isolobal Analogy
  12. Memory Tricks
  13. Don’t Confuse
  14. Common Mistakes
  15. Practice
  16. Quick Revision Table
  17. Key Takeaways
  18. What’s Next

Prerequisites

The Hook: A Metal That Turns Into a Gas

What Counts as Organometallic

An organometallic compound contains at least one direct metal–carbon bond. Metal carbonyls (M–CO) are included by convention; metal cyanides and carbonates usually are not. Hydride, phosphine and nitrosyl complexes are discussed alongside because they share the bonding ideas and appear in the same catalytic cycles.

Two terms recur throughout:

  • Hapticity (ηⁿ): the number of contiguous ligand atoms bonded to the metal. Ethylene in Zeise’s salt is η²; cyclopentadienyl in ferrocene is η⁵.
  • Bridging (μₙ): a ligand bonded to n metal atoms. A μ₂-CO bridges two metals.

The 18-Electron Rule

A transition metal has nine valence orbitals: five (n−1)d, one ns and three np. Filling all nine with bonding or non-bonding electron pairs gives 18 valence electrons, the transition-metal analogue of the octet. Stable, isolable organometallic compounds of the middle transition metals (groups 6–9) with good π-acceptor ligands usually have 18 electrons.

The MO reason

In an octahedral complex ML₆ the six ligand σ orbitals combine with metal s, p and the e_g pair of d orbitals to give six bonding MOs. The t₂g set (d_xy, d_xz, d_yz) has the wrong symmetry for σ bonding and is non-bonding with pure σ-donors. With π-acceptor ligands such as CO, the t₂g set overlaps with empty ligand π* orbitals and becomes bonding. Now there are 6 + 3 = 9 bonding MOs, the e_g* level above them is strongly antibonding, and the gap (Δ_o) is large.

  • 18 electrons fill exactly the bonding set: stable.
  • More than 18 electrons would enter e_g*: destabilising.
  • Fewer than 18 leave a bonding t₂g orbital empty: the complex is reactive, seeking another ligand.

With σ-only ligands (H₂O, NH₃) the t₂g set is non-bonding, Δ_o is small, and anything from 12 to 22 electrons is acceptable. That is why classical Werner complexes ignore the rule, and organometallic complexes of low-valent metals obey it. You can revisit the ligand-field side of this argument in Crystal Field, Ligand Field and MO Theory.

Counting Electrons: Two Methods

Both methods give the same total. Choose one and never mix them within a single count.

Method 1: neutral (covalent) counting

  1. Start with the metal’s group number (the number of valence electrons of the neutral atom): Ti 4, Cr 6, Mn 7, Fe 8, Co 9, Ni 10.
  2. Add each ligand’s contribution as a neutral species.
  3. Subtract the overall positive charge, or add the negative charge.
  4. Add 1 for each metal–metal bond.

Method 2: ionic counting

  1. Remove anionic ligands with their electron pairs (H⁻, Cl⁻, CH₃⁻, C₅H₅⁻) to find the metal oxidation state and its dⁿ count.
  2. Add the electrons donated by each ligand in its closed-shell form.
LigandNeutral methodIonic method (form)
CO, PR₃, NH₃, η²-alkene, Fischer carbene, η²-H₂22 (neutral L)
H, Cl, Br, CH₃, Ph, acyl, η¹-allyl, η¹-Cp12 (as anion)
η³-allyl34 (C₃H₅⁻)
η⁴-butadiene, η⁴-cyclobutadiene44
η⁵-C₅H₅ (Cp)56 (C₅H₅⁻)
η⁶-C₆H₆66
η⁷-C₇H₇76 (C₇H₇⁺)
linear NO32 (NO⁺)
bent NO12 (NO⁻)
μ₂-CO (bridging)1 to each metal (2 shared)—
M–M single bond1 to each metal1 to each metal
alkylidene (Schrock) M=CR₂24 (CR₂²⁻)
alkylidyne M≡CR36 (CR³⁻)

Counts to know

ComplexNeutral countTotalComment
Ni(CO)₄10 + 818tetrahedral
Fe(CO)₅8 + 1018trigonal bipyramidal
Cr(CO)₆6 + 1218octahedral
V(CO)₆5 + 1217paramagnetic, easily reduced to [V(CO)₆]⁻ (18)
Mn₂(CO)₁₀7 + 10 + 1 (Mn–Mn)18 per Mnunbridged, Mn–Mn bond
Co₂(CO)₈ (solid)9 + 6 + 2 × 1 (μ-CO) + 1 (Co–Co)18 per Cotwo bridging CO
Fe₂(CO)₉8 + 6 + 3 × 1 (μ-CO) + 1 (Fe–Fe)18 per Fethree bridging CO
[Co(CO)₄]⁻9 + 8 + 118tetrahedral, Co(−I)
HMn(CO)₅7 + 1 + 1018Mn(I)
CpMn(CO)₃7 + 5 + 618“piano stool”
(η⁶-C₆H₆)₂Cr6 + 1218sandwich
RhCl(PPh₃)₃9 + 1 + 616Wilkinson’s catalyst, square planar
trans-IrCl(CO)(PPh₃)₂9 + 1 + 2 + 416Vaska’s complex
K[PtCl₃(η²-C₂H₄)]10 + 3 + 2 + 116Zeise’s salt, Pt(II) d⁸
Cp₂TiCl₂4 + 10 + 216Ti(IV), d⁰
W(CH₃)₆6 + 612W(VI), d⁰; early-metal alkyls are electron-poor

When the rule fails

  • Square-planar d⁸ complexes of Rh(I), Ir(I), Ni(II), Pd(II), Pt(II) are stable at 16 electrons. The ninth orbital (the p_z perpendicular to the plane) is too high in energy to use. This is the 16-electron rule, and these are the complexes that dominate catalysis.
  • Early transition metals (groups 3–5) have too few electrons and the ligands are often too bulky to reach 18: Cp₂TiCl₂ (16), [Cp₂ZrMe]⁺ (14), W(CH₃)₆ (12).
  • Metallocenes beyond iron exceed 18: Cp₂Co (19), Cp₂Ni (20). The extra electrons sit in weakly antibonding orbitals (see the hydrocarbon-ligand page).
  • Odd-electron species such as V(CO)₆ (17) exist when dimerisation is sterically blocked.

Metal Carbonyls: Synthesis

RouteExampleComment
Direct reaction of metal with CONi + 4 CO → Ni(CO)₄ (mild conditions); Fe + 5 CO → Fe(CO)₅ (higher temperature and pressure)Works for finely divided Ni and Fe
Reductive carbonylation of a salt or oxideCrCl₃ + Al + 6 CO → Cr(CO)₆ + AlCl₃; Re₂O₇ + 17 CO → Re₂(CO)₁₀ + 7 CO₂Reducing agent (Al, Na, H₂, or CO itself) plus CO under pressure
From a carbonate with H₂ and CO2 CoCO₃ + 2 H₂ + 8 CO → Co₂(CO)₈ + 2 CO₂ + 2 H₂OHigh pressure
Photolysis or thermolysis2 Fe(CO)₅ → Fe₂(CO)₉ + CO (light); warming Fe₂(CO)₉ in solution gives Fe₃(CO)₁₂ and Fe(CO)₅Loss of CO, then aggregation
Reduction to carbonylate anionsCo₂(CO)₈ + 2 Na → 2 Na[Co(CO)₄]; Mn₂(CO)₁₀ + 2 Na → 2 Na[Mn(CO)₅]Na/Hg or Na in THF; anions are good nucleophiles
SubstitutionMo(CO)₆ + 3 MeCN → fac-Mo(CO)₃(MeCN)₃ + 3 COLabile nitriles are then replaced by arenes, dienes, phosphines

Carbonylate anions such as [Mn(CO)₅]⁻ and [CpFe(CO)₂]⁻ are the standard starting points for alkyl and acyl complexes, which you will meet in Alkyls, Carbenes and π-Complexes.

Bonding in Metal Carbonyls: The Synergic Model

CO binds through carbon, not oxygen, because its HOMO, the σ orbital that acts as the carbon lone pair, is concentrated on carbon, and its LUMO, the π* pair, has larger lobes on carbon. The bond has two components:

  1. σ donation: the carbon-based σ lone pair donates into an empty metal orbital (d_z², s, p).
  2. π back-donation: a filled metal d orbital (t₂g in an octahedron) donates into the empty CO π* orbital.
graph LR
    A["CO sigma HOMO
(C lone pair)"] -- "sigma donation" --> B["empty metal d/s/p"] C["filled metal d (t2g)"] -- "pi back-donation" --> D["CO pi* LUMO"] B --> E["M-C bond strengthens"] D --> F["C-O bond weakens:
longer C-O, lower nu(CO)"]

The two parts reinforce each other (synergism): σ donation builds negative charge on the metal, which makes back-donation easier, which in turn draws electron density off the metal so it can accept more σ density.

Consequences of back-donation:

ObservableEffect
M–C bondshorter and stronger (partial double-bond character, M=C=O resonance form)
C–O bondlonger, lower bond order (electrons in π*)
ν(CO)lower than free CO (2143 cm⁻¹)
Formal metal oxidation statelow (0, −1, −2) favoured; high-valent carbonyls are rare

What moves ν(CO)

The more electron density the metal can push into π*, the lower ν(CO). Three controls:

  1. Charge on the complex. In an isoelectronic series, more negative charge means more back-donation.
Isoelectronic series (d¹⁰, tetrahedral)ν(CO) / cm⁻¹ (approx.)
Ni(CO)₄2060
[Co(CO)₄]⁻1890
[Fe(CO)₄]²⁻1790
Isoelectronic series (d⁶, octahedral)ν(CO) / cm⁻¹ (approx.)
[Mn(CO)₆]⁺2090
Cr(CO)₆2000
[V(CO)₆]⁻1860
  1. Co-ligands. Replacing CO by a poorer π-acceptor (PR₃, amine) leaves more d density for the remaining CO ligands, so their ν(CO) falls. Replacing CO by a better acceptor (PF₃, NO⁺) raises the remaining ν(CO). Approximate π-acceptor order: NO⁺ > CO ≈ PF₃ > PCl₃ > P(OR)₃ > PR₃ > RCN > NH₃ (no π acidity).

  2. Bonding mode. A bridging CO receives back-donation from two or three metals.

CO modeTypical ν(CO) range / cm⁻¹
free CO2143
terminal M–COabout 1850–2120
μ₂-CO (bridging two metals)about 1700–1860
μ₃-CO (capping three metals)about 1600–1700

How many IR bands? Symmetry decides

Only ν(CO) modes that transform like x, y or z are IR active. For the common geometries:

Complex typePoint groupIR-active ν(CO) bands
M(CO)₆O_h1 (T₁u)
Ni(CO)₄, M(CO)₄ tetrahedralT_d1 (T₂)
Fe(CO)₅D₃h2 (A₂″ + E′)
M(CO)₅LC₄v3 (2A₁ + E)
trans-M(CO)₄L₂D₄h1 (E_u)
cis-M(CO)₄L₂C₂v4 (2A₁ + B₁ + B₂)
fac-M(CO)₃L₃C₃v2 (A₁ + E)
mer-M(CO)₃L₃C₂v3 (2A₁ + B₁)

This table settles cis/trans and fac/mer questions from a spectrum in seconds. Point groups and character tables are developed in the syllabus unit on symmetry; here you need only the band counts.

Isotope shift

Replacing ¹²CO by ¹³CO increases the reduced mass and lowers ν(CO) by the factor \( \sqrt{\mu_{12}/\mu_{13}} = \sqrt{6.856/7.172} \approx 0.978 \). Free ¹³CO absorbs near 2095 cm⁻¹. Labelled CO is the tool behind the classic CO-insertion experiment on the reactions page.

Nitrosyl Complexes

NO has one more electron than CO (11 valence electrons, one in π*). It binds in two ways:

ModeM–N–O angleNeutral countIonic formalismTypical ν(NO)
Linearabout 165–180°3 electronsNO⁺, 2 electrons, isoelectronic with COhigher, roughly 1650–1900 cm⁻¹
Bentabout 120–140°1 electronNO⁻, 2 electrons, N carries a lone pairlower, roughly 1525–1700 cm⁻¹

Because linear NO gives 3 electrons, replacing one CO and moving one step left in the periodic table keeps the count at 18. This gives the isoelectronic series

$$\text{Ni(CO)}_4,\ \ \text{Co(CO)}_3\text{(NO)},\ \ \text{Fe(CO)}_2\text{(NO)}_2,\ \ \text{Mn(CO)(NO)}_3,\ \ \text{Cr(NO)}_4$$

all 18-electron and tetrahedral. Linear-to-bent conversion turns NO from a 3- into a 1-electron donor and opens a coordination site, which is why some nitrosyl complexes undergo associative substitution even though they are formally 18-electron (see the reactions page). The ν(NO) ranges overlap, so IR alone does not always decide the mode; X-ray structures do.

Phosphine Ligands

Tertiary phosphines PR₃ are the main “spectator” ligands of catalysis because their electronic and steric properties can be tuned independently by changing R.

  • σ donation from the phosphorus lone pair.
  • π acceptance into the P–R σ* orbitals (the older picture used P 3d orbitals; the σ* description is now preferred). Electronegative R (F, OR, Cl) lowers σ* and makes the phosphine a better π-acceptor: PF₃ rivals CO.

Tolman’s two parameters

ParameterDefinitionWhat it tells you
Electronic parameterν(CO) of the A₁ band of Ni(CO)₃LLower ν(CO) = stronger net donor
Cone angle θapex angle of a cone, centred on the metal, that just encloses the van der Waals surfaces of the substituentsLarger θ = bulkier ligand
PhosphineCone angle (approx.)
PH₃87°
PF₃104°
P(OMe)₃107°
PMe₃118°
PPh₃145°
PCy₃170°
P(t-Bu)₃182°

Bulky phosphines favour low coordination numbers and ligand dissociation (Wilkinson’s catalyst loses one PPh₃ to become active), and they speed reductive elimination. Electron-rich phosphines (alkyl rather than aryl) speed oxidative addition. Both effects return in Homogeneous Catalysis.

Metal Hydrides and Dihydrogen Complexes

Hydrides

The M–H ligand counts 1 electron (neutral method) or 2 as H⁻ (ionic method).

Synthesis: protonation of an anion ([Co(CO)₄]⁻ + H⁺ → HCo(CO)₄); oxidative addition of H₂; β-hydride elimination from an alkyl; metathesis with a main-group hydride (NaBH₄, LiAlH₄) on a metal halide.

Characterisation:

  • ¹H NMR: hydrides of dⁿ metals (n > 0) resonate far upfield, typically between δ 0 and about −25, a region almost free of other signals. Coupling to ³¹P or ¹⁰³Rh reveals the number and geometry of neighbouring ligands.
  • IR: ν(M–H) roughly 1700–2300 cm⁻¹, often weak; M–D shifts it by about \( 1/\sqrt{2} \).

Acid or hydride donor? The “hydride” label is formal. HCo(CO)₄ is a strong acid (it gives H⁺ and [Co(CO)₄]⁻), because the anion is stabilised by the π-acceptor CO ligands. Hydrides with electron-rich donor ligands instead transfer H⁻.

Dihydrogen complexes

In 1984 Kubas reported W(CO)₃(PiPr₃)₂(η²-H₂), the first complex of molecular H₂ bound side-on with the H–H bond intact. The bonding is a σ analogue of the Dewar–Chatt–Duncanson model: σ(H–H) donates to the metal, and the metal back-donates into σ*(H–H). Too much back-donation breaks the H–H bond: the result is a dihydride (oxidative addition).

Testη²-H₂ complexClassical dihydride M(H)₂
H–H distanceshort, close to H₂ (H₂ itself 74 pm)long, no H–H bond
¹J(H–D) in the HD isotopomerlarge (tens of Hz; free HD about 43 Hz)very small (a few Hz at most)
¹H T₁ relaxationshort (the two H nuclei are close)longer
Electron count, oxidation stateH₂ is a 2e neutral L; OS unchangedtwo 1e X ligands; OS +2

Metal–Metal Bonds and the Isolobal Analogy

Mn₂(CO)₁₀ has an unsupported Mn–Mn bond and no bridging CO. Each Mn(CO)₅ unit has 17 electrons; pairing them through the M–M bond gives 18 each, just as two 7-electron CH₃ radicals pair to give ethane. Roald Hoffmann generalised this as the isolobal analogy: two fragments are isolobal if their frontier orbitals have the same number, symmetry, approximate energy and shape, and the same number of electrons in them.

Organic fragmentElectrons short of octetIsolobal metal fragmentElectrons short of 18
CH₃1Mn(CO)₅ (d⁷ ML₅)1
CH₂2Fe(CO)₄ (d⁸ ML₄)2
CH3Co(CO)₃ (d⁹ ML₃)3

So Mn₂(CO)₁₀ is the analogue of ethane, CH₃Mn(CO)₅ of ethane too, and (CO)₉Co₃(μ₃-CR) of a tetrahedrane in which three CH units have been replaced by Co(CO)₃. The idea is a bridge to cluster electron counting (Wade’s rules), which the syllabus treats in the cages-and-clusters unit.

Memory Tricks

Don’t Confuse

ThisvsThat
Neutral method: Cl and H are 1 e⁻, Cp is 5Ionic method: Cl⁻ and H⁻ are 2 e⁻, Cp⁻ is 6, metal counted as dⁿ
Terminal CO, 2 e⁻ to one metalμ₂-CO, 1 e⁻ to each of two metals
Linear NO: 3 e⁻ (NO⁺ formalism)Bent NO: 1 e⁻ (NO⁻ formalism)
η²-H₂: OS unchanged, large J(HD)Dihydride: OS +2, tiny J(HD)
Cone angle: steric sizeTolman electronic parameter: donor strength (from ν(CO) of Ni(CO)₃L)
18-e rule: octahedral/tetrahedral low-valent carbonyls16-e rule: square-planar d⁸ (Rh(I), Ir(I), Pd(II), Pt(II))

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the valence electron count of [CpFe(CO)₂]⁻?
  2. How many IR-active ν(CO) bands does trans-Mo(CO)₄(PPh₃)₂ show?
  3. Which binds side-on with its H–H bond intact: the H₂ in W(CO)₃(PiPr₃)₂(H₂) or the two H in cis-IrCl(H)₂(CO)(PPh₃)₂?
Answers
  1. 18. Neutral: Fe 8 + Cp 5 + 2 CO 4 + 1 (negative charge) = 18.
  2. One (E_u), because the D₄h trans isomer has a centre of symmetry and only the antisymmetric in-plane stretch is IR active.
  3. The tungsten complex (Kubas’s η²-H₂ complex). The iridium compound is a dihydride, Ir(III), formed by oxidative addition to Vaska’s complex.

Level 2: Part B Style

Practice Q1. Which complex does not have 18 valence electrons?

(a) Fe(CO)₂(NO)₂ (b) Mn₂(CO)₁₀ (per Mn) (c) V(CO)₆ (d) CpMn(CO)₃

Answer: (c) V(CO)₆

(a) Fe 8 + 2 CO (4) + 2 linear NO (6) = 18. (b) Mn 7 + 5 CO (10) + Mn–Mn (1) = 18. (c) V 5 + 6 CO (12) = 17. (d) Mn 7 + Cp 5 + 3 CO (6) = 18.

Practice Q2. The correct order of ν(CO) is:

(a) [V(CO)₆]⁻ > Cr(CO)₆ > [Mn(CO)₆]⁺ (b) [Mn(CO)₆]⁺ > Cr(CO)₆ > [V(CO)₆]⁻ (c) Cr(CO)₆ > [Mn(CO)₆]⁺ > [V(CO)₆]⁻ (d) all three equal, being isoelectronic

Answer: (b)

All three are d⁶ octahedral. More negative charge means more back-donation into π*, a weaker C–O bond and lower ν(CO): about 2090, 2000 and 1860 cm⁻¹.

Practice Q3. An Fe₂(CO)₉ sample shows a strong IR band near 1830 cm⁻¹ in addition to bands above 2000 cm⁻¹. The 1830 cm⁻¹ band is due to:

(a) a terminal CO on Fe(0) (b) μ₂-bridging CO (c) free CO trapped in the crystal (d) an Fe–Fe stretch

Answer: (b)

Bridging CO ligands receive back-donation from two metals and absorb in roughly the 1700–1860 cm⁻¹ range. Terminal COs are above about 1850, free CO is at 2143, and metal–metal stretches lie far below 400 cm⁻¹.

Practice Q4. Which phosphine has the largest Tolman cone angle?

(a) PMe₃ (b) PPh₃ (c) P(OMe)₃ (d) PCy₃

Answer: (d) PCy₃

Approximate cone angles: P(OMe)₃ 107°, PMe₃ 118°, PPh₃ 145°, PCy₃ 170°. Cyclohexyl groups are bulky near phosphorus; phenyl rings are flat and can turn edge-on.

Level 3: Part C Style

Practice Q5. A d⁶ complex M(CO)₃L₃ (L = a phosphine) shows two strong ν(CO) bands of similar pattern to an A₁ + E pair. Consider:

  1. The complex is the fac isomer.
  2. The mer isomer would show three IR-active ν(CO) bands.
  3. Replacing L by PF₃ would raise the ν(CO) values.
  4. The complex must be paramagnetic because it has three phosphines.

Which are correct?

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. fac-M(CO)₃L₃ is C₃v: A₁ + E, two bands.
  2. Correct. mer is C₂v: 2A₁ + B₁, three bands.
  3. Correct. PF₃ is a much better π-acceptor than an alkyl or aryl phosphine; it competes with CO for d density, so CO back-donation falls and ν(CO) rises.
  4. Wrong. A low-spin d⁶ octahedral complex with strong-field ligands has all six electrons paired in t₂g; it is diamagnetic. The number of phosphines has nothing to do with it.

Practice Q6. For a neutral carbonyl, ν(¹²CO) is observed at 2050 cm⁻¹. Assuming the CO oscillator behaves independently, where is ν(¹³CO) expected, and what is the percentage decrease in the C–O force constant relative to free CO (2143 cm⁻¹)?

(a) about 2004 cm⁻¹ and about 8.5% (b) about 2095 cm⁻¹ and about 4.3% (c) about 2004 cm⁻¹ and about 4.3% (d) about 1980 cm⁻¹ and about 8.5%

Answer: (a)

Isotope shift: \( \tilde\nu(^{13}\text{CO}) = 2050 \times \sqrt{\mu_{12}/\mu_{13}} = 2050 \times 0.9777 \approx 2004 \) cm⁻¹ (μ₁₂ = 6.856 u, μ₁₃ = 7.172 u).

Force constant: \( k \propto \tilde\nu^2 \), so \( k/k_{\text{free}} = (2050/2143)^2 = 0.9151 \). The decrease is about 8.5%. Option (c) uses the wavenumber ratio (4.3%) instead of its square, the usual slip.

Practice Q7. A cationic complex [M(H₂)(L)ₙ]⁺ is prepared with HD instead of H₂. The ¹H NMR signal of the H–D ligand is a 1:1:1 triplet with \( ^1J(\text{H–D}) = 32 \) Hz, and the ¹H T₁ of the H₂ isotopomer is very short. Which statements follow?

  1. The H–D bond is intact; the ligand is η²-HD.
  2. The metal oxidation state is the same as in the precursor before H₂ binding.
  3. The ligand counts as two X-type 1-electron ligands in the neutral method.
  4. Making the metal more electron-rich could convert it into a dihydride.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2, 3 and 4 only (d) 1 and 2 only

Answer: (a) 1, 2 and 4 only
  1. Correct. A J(HD) of tens of Hz (free HD is about 43 Hz) shows a substantial H–D bond; a dihydride would show only a few Hz. The triplet arises from coupling to deuterium (I = 1).
  2. Correct. η²-H₂ is a neutral 2-electron L ligand; binding it does not oxidise the metal.
  3. Wrong. That description fits a dihydride. η²-H₂ is one L ligand (2 electrons).
  4. Correct. Stronger back-donation into σ*(H–H) cleaves the bond: oxidative addition to M(H)₂.

Quick Revision Table

IdeaFact
18-e rule basis9 valence orbitals; π-acceptors make t₂g bonding
16-e exceptionssquare-planar d⁸: RhCl(PPh₃)₃, Vaska’s, Zeise’s salt
Neutral methodgroup no. + ligand e⁻ − charge (+1 per M–M)
Ionic methoddⁿ (from OS) + 2 per L, 2 per X⁻, 6 per Cp⁻
Carbonyl formulasNi(CO)₄, Fe(CO)₅, Cr(CO)₆; Mn₂(CO)₁₀, Co₂(CO)₈; V(CO)₆ 17 e⁻
Synergic bondingσ from C lone pair + π back-donation into π*
ν(CO)free 2143; terminal ~1850–2120; μ₂ ~1700–1860; μ₃ ~1600–1700 cm⁻¹
Charge series[Mn(CO)₆]⁺ > Cr(CO)₆ > [V(CO)₆]⁻; Ni(CO)₄ > [Co(CO)₄]⁻ > [Fe(CO)₄]²⁻
IR bandsO_h 1; T_d 1; D₃h 2; C₄v 3; trans-L₂ 1; cis-L₂ 4; fac 2; mer 3
NOlinear 3 e⁻; bent 1 e⁻
Phosphinescone angle (PPh₃ 145°, PCy₃ 170°); Tolman ν(CO) of Ni(CO)₃L
Hydrides¹H δ 0 to about −25; HCo(CO)₄ strong acid
η²-H₂Kubas 1984; large J(HD), short T₁, OS unchanged
IsolobalCH₃ ↔ Mn(CO)₅; CH₂ ↔ Fe(CO)₄; CH ↔ Co(CO)₃

Key Takeaways

What’s Next