Skip to content

Homogeneous Catalysis by Organometallic Complexes

CSIR NET chemistry: catalytic cycles for hydrogenation, hydroformylation, Monsanto, Wacker, Ziegler–Natta, metathesis and Pd cross-coupling; TON, TOF, ee.

  • 18 min read
  • Updated
On this page · 18 sections
  1. Prerequisites
  2. The Hook: Acetic Acid From Two One-Carbon Molecules
  3. Vocabulary of Catalysis
  4. Hydrogenation
  5. Hydroformylation (the Oxo Process)
  6. Methanol Carbonylation: Monsanto and Cativa
  7. The Wacker Process
  8. Alkene Polymerisation
  9. Alkene Metathesis
  10. Palladium-Catalysed Cross-Coupling
  11. Other Homogeneous Processes Worth Knowing
  12. Memory Tricks
  13. Don’t Confuse
  14. Common Mistakes
  15. Practice
  16. Quick Revision Table
  17. Key Takeaways
  18. What’s Next

Prerequisites

The Hook: Acetic Acid From Two One-Carbon Molecules

Vocabulary of Catalysis

TermMeaning
Precatalystthe complex you add (RhCl(PPh₃)₃, Cp₂ZrCl₂)
Active specieswhat enters the cycle (RhCl(PPh₃)₂, [Cp₂ZrMe]⁺)
Resting statethe most abundant species during catalysis
Rate-determining step (RDS)the step that controls the overall rate
Turnover number (TON)mol product formed per mol catalyst before it dies
Turnover frequency (TOF)TON per unit time (s⁻¹ or h⁻¹)
Selectivitychemo-, regio- (n : iso) or stereo- (ee) preference
$$\text{TON} = \frac{n(\text{product})}{n(\text{catalyst})}, \qquad \text{TOF} = \frac{\text{TON}}{t}, \qquad \text{ee} = \frac{[R] - [S]}{[R] + [S]} \times 100\%$$

Homogeneous vs heterogeneous

HomogeneousHeterogeneous
catalyst dissolved in the reaction phasesolid catalyst, gas or liquid reactants
every metal atom can be activeonly surface atoms active
mild conditions, high selectivity, tunable ligandsrobust, high temperature
mechanism studied by NMR, IR, kineticsmechanism harder to probe
catalyst separation and recovery difficulteasy separation

Biphasic systems bridge the gap: rhodium with the water-soluble sulfonated phosphine TPPTS hydroformylates propene in water, and the organic product separates as a second phase.

Tolman’s 16/18-electron rule

Tolman (1972) proposed that diamagnetic organometallic complexes of transition metals exist in significant concentration only with 16 or 18 valence electrons, and that catalytic reactions proceed by elementary steps between intermediates of 16 or 18 electrons. It is a check, not a law (Wilkinson’s cycle passes through a 14-electron species), but if your proposed intermediate has 20 or 12 electrons, look again.

Hydrogenation

Wilkinson’s catalyst, RhCl(PPh₃)₃

The first widely used homogeneous hydrogenation catalyst for alkenes (G. Wilkinson’s group, 1960s). Red-violet, square planar, Rh(I), 16 electrons.

graph TD
    A["RhCl(PPh3)3
16 e, Rh(I)"] -->|"- PPh3"| B["RhCl(PPh3)2
14 e"] B -->|"+ H2, oxidative addition"| C["RhCl(H)2(PPh3)2
16 e, Rh(III)"] C -->|"+ alkene"| D["RhCl(H)2(alkene)(PPh3)2
18 e"] D -->|"migratory insertion"| E["RhCl(H)(alkyl)(PPh3)2
16 e"] E -->|"reductive elimination
of alkane"| B

Key points:

  • PPh₃ dissociation opens the coordination sites; excess PPh₃ slows the reaction.
  • H₂ adds before the alkene (the “hydride route”); in Halpern’s analysis, the migratory insertion step is rate-determining.
  • Delivery of both H atoms from the metal makes the addition syn (cis).
  • Selectivity: less hindered alkenes react faster (terminal and cis-disubstituted > trans-disubstituted > trisubstituted; tetrasubstituted barely react). Ketones, esters, nitriles, nitro groups and arenes are generally untouched.
  • Limitations: ethylene binds too strongly and inhibits; aldehydes are decarbonylated stoichiometrically (RCHO → RH + RhCl(CO)(PPh₃)₂), which is used deliberately as Tsuji–Wilkinson decarbonylation.

Related catalysts: cationic rhodium complexes of chelating diphosphines, such as [Rh(dppe)(solvent)₂]⁺, bind the alkene before H₂ (the “unsaturate route” in Halpern’s analysis); Crabtree’s catalyst [Ir(cod)(PCy₃)(py)]PF₆ hydrogenates even tetrasubstituted alkenes and can be directed by a nearby OH group.

Asymmetric hydrogenation

With a chiral chelating phosphine, a prochiral alkene gives one enantiomer in excess. Knowles used a rhodium complex of the chiral bisphosphine DIPAMP to make L-DOPA (for Parkinson’s disease) industrially at Monsanto; Noyori developed Ru–BINAP catalysts for a broad range of alkenes and ketones. Knowles and Noyori shared the 2001 Nobel Prize in Chemistry (with Sharpless, for asymmetric oxidation).

Hydroformylation (the Oxo Process)

$$\text{RCH=CH}_2 + \text{CO} + \text{H}_2 \longrightarrow \text{RCH}_2\text{CH}_2\text{CHO}\ (n) + \text{RCH(CHO)CH}_3\ (iso)$$

Discovered by Otto Roelen in 1938 with cobalt. Linear (n) aldehydes are usually wanted (for plasticiser and detergent alcohols); the n : iso ratio is the key selectivity.

Cobalt cycle (Heck–Breslow)

StepSpeciese⁻OS of Co
CO dissociationHCo(CO)₄ → HCo(CO)₃18 → 16+1
Alkene coordinationHCo(CO)₃(alkene)18+1
1,2-InsertionRCH₂CH₂Co(CO)₃16+1
CO coordinationRCH₂CH₂Co(CO)₄18+1
CO migratory insertionRCH₂CH₂C(O)Co(CO)₃16+1
H₂ oxidative additionRCH₂CH₂C(O)Co(H)₂(CO)₃18+3
Reductive elimination of aldehyde→ RCH₂CH₂CHO + HCo(CO)₃16+1

(The final hydrogenolysis may instead go through reaction of the acyl with HCo(CO)₄.)

Comparing the catalysts

CatalystConditionsSelectivity
HCo(CO)₄ (unmodified cobalt)high temperature, and high CO pressure to keep HCo(CO)₄ from decomposingmoderate n : iso; alkene isomerisation
HCo(CO)₃(PBu₃) (phosphine-modified cobalt, Shell)lower pressure, higher temperaturehigher n : iso; aldehyde hydrogenated to alcohol directly
HRh(CO)(PPh₃)₃ with excess PPh₃low pressure, mild temperaturehigh n : iso; little hydrogenation; far more active per metal

Bulky phosphines favour the linear alkyl after insertion (the metal goes to the less hindered terminal carbon). Excess phosphine keeps the rhodium coordinated by two or more PPh₃, raising n : iso at the cost of rate.

Methanol Carbonylation: Monsanto and Cativa

Monsanto process (rhodium)

Catalyst [RhI₂(CO)₂]⁻ (Rh(I), square planar, 16 electrons), promoter HI.

graph TD
    A["[RhI2(CO)2]-
16 e, Rh(I)"] -->|"+ CH3I, oxidative addition (RDS)"| B["[CH3RhI3(CO)2]-
18 e, Rh(III)"] B -->|"methyl migration"| C["[CH3C(O)RhI3(CO)]-
16 e"] C -->|"+ CO"| D["[CH3C(O)RhI3(CO)2]-
18 e"] D -->|"reductive elimination of CH3COI"| A

The organic side completes the loop:

$$\text{CH}_3\text{OH} + \text{HI} \longrightarrow \text{CH}_3\text{I} + \text{H}_2\text{O}; \qquad \text{CH}_3\text{COI} + \text{H}_2\text{O} \longrightarrow \text{CH}_3\text{COOH} + \text{HI}$$

Kinetics: rate = k[Rh][CH₃I], independent of CO pressure and of methanol concentration. That is the signature of rate-determining oxidative addition of CH₃I: CO and methanol enter after the RDS (methanol only through the fast HI equilibrium).

Cativa process (iridium)

[IrI₂(CO)₂]⁻ with promoters (for example ruthenium or other iodide-accepting salts). Iridium is the more nucleophilic metal, so oxidative addition of CH₃I is fast, and the RDS moves to migratory insertion, which requires loss of iodide to open a site; the promoters help remove iodide. The iridium system is more stable at low water concentration, which reduces by-products.

The Wacker Process

$$\text{CH}_2{=}\text{CH}_2 + \tfrac{1}{2}\text{O}_2 \xrightarrow{\text{PdCl}_2,\ \text{CuCl}_2,\ \text{H}_2\text{O}} \text{CH}_3\text{CHO}$$

Three coupled redox reactions:

$$\text{C}_2\text{H}_4 + \text{PdCl}_2 + \text{H}_2\text{O} \longrightarrow \text{CH}_3\text{CHO} + \text{Pd} + 2\,\text{HCl}$$

$$\text{Pd} + 2\,\text{CuCl}_2 \longrightarrow \text{PdCl}_2 + 2\,\text{CuCl}$$

$$2\,\text{CuCl} + \tfrac{1}{2}\text{O}_2 + 2\,\text{HCl} \longrightarrow 2\,\text{CuCl}_2 + \text{H}_2\text{O}$$

Pd is the organometallic catalyst (Pd(II) → Pd(0) → Pd(II)); copper carries electrons to O₂.

Mechanism in outline:

  1. [PdCl₄]²⁻ binds ethylene and loses Cl⁻; a second Cl⁻ is replaced by water.
  2. Hydroxypalladation: water (or hydroxide) attacks the coordinated alkene, giving Pd–CH₂CH₂OH.
  3. β-Hydride elimination gives a Pd–H complex of vinyl alcohol.
  4. Reinsertion with the opposite regiochemistry gives Pd–CH(OH)CH₃.
  5. A second β-H elimination (from the O–H-bearing carbon) releases CH₃CHO, H⁺ and Pd(0).

Evidence:

  • Run in D₂O, the acetaldehyde contains no deuterium: all four H atoms come from ethylene, so free vinyl alcohol (which would tautomerise with exchange) is not released.
  • Rate law (at moderate chloride):
$$\text{rate} = \frac{k[\text{PdCl}_4^{2-}][\text{C}_2\text{H}_4]}{[\text{H}^+][\text{Cl}^-]^2}$$

Inverse second order in Cl⁻: two chlorides are lost before the RDS (one replaced by ethylene, one by water). Inverse first order in H⁺: an aqua ligand is deprotonated (or the hydroxy intermediate is formed) in a pre-equilibrium.

Whether water attacks the alkene from outside (anti) or after binding to Pd (syn) depends on conditions, especially chloride concentration; both have experimental support.

The laboratory version (Tsuji–Wacker) oxidises terminal alkenes to methyl ketones (Markovnikov).

Alkene Polymerisation

Ziegler–Natta catalysts

TiCl₄ or TiCl₃ with AlEt₃ (Ziegler, Natta; Nobel Prize 1963) polymerise ethylene at low pressure and propylene stereoregularly. The Cossee–Arlman mechanism:

  1. a Ti alkyl with a vacant cis site (formed by alkylation with AlEt₃) binds the alkene;
  2. the alkene inserts into the Ti–C bond (1,2-insertion), lengthening the chain by two carbons;
  3. the vacant site regenerates and the cycle repeats.

Chain termination / transfer: β-hydride elimination (to the metal or to a monomer), transfer of the chain to aluminium, or hydrogenolysis with added H₂ (used to control molecular weight).

Metallocene (single-site) catalysts

Cp₂ZrCl₂ activated by methylaluminoxane (MAO) gives the cation [Cp₂ZrMe]⁺: Zr(IV), d⁰, 14 electrons. The alkene binds (16 electrons), inserts (back to 14), and so on. Because there are no d electrons, the alkene is held by σ donation only, and an α-agostic interaction often assists insertion. Chain transfer to H₂ is a σ-bond metathesis.

The symmetry of the metallocene controls tacticity of polypropylene:

Metallocene symmetryExample typePolypropylene
C₂v (unbridged Cp₂Zr)Cp₂ZrCl₂atactic
C₂ (chiral ansa-metallocene)rac-ethylenebis(indenyl)ZrCl₂isotactic
C_s (ansa, one Cp and one fluorenyl)Me₂C(Cp)(fluorenyl)ZrCl₂syndiotactic

Alkene Metathesis

$$\text{R}^1\text{CH=CHR}^1 + \text{R}^2\text{CH=CHR}^2 \rightleftharpoons 2\,\text{R}^1\text{CH=CHR}^2$$

Chauvin mechanism (1971): a metal alkylidene and an alkene undergo [2+2] cycloaddition to a metallacyclobutane, which cleaves the other way to give a new alkylidene and a new alkene. Chauvin, Grubbs and Schrock shared the 2005 Nobel Prize in Chemistry.

CatalystFormula (typical)Character
SchrockMo(=NAr)(=CHCMe₂Ph)(OR)₂ (Mo(VI), d⁰)very active; sensitive to air, water and many functional groups
Grubbs first generationRuCl₂(PCy₃)₂(=CHPh), 16 e⁻tolerant of air, water, many functional groups
Grubbs second generationRuCl₂(PCy₃)(NHC)(=CHPh)more active; NHC replaces one PCy₃

For the Grubbs catalysts, one phosphine dissociates to give the 14-electron active species, which binds the alkene.

VariantWhat happensDriving force
Ring-closing metathesis (RCM)diene → cycloalkene + CH₂=CH₂loss of ethylene (entropy, gas evolution)
Ring-opening metathesis polymerisation (ROMP)strained cycloalkene (norbornene) → polymerrelief of ring strain
Cross metathesis (CM)two different alkenes exchange partnersoften ethylene loss
Ring-opening metathesis (ROM)strained ring + alkene → dienering strain

Palladium-Catalysed Cross-Coupling

Heck, Negishi and Suzuki shared the 2010 Nobel Prize in Chemistry for palladium-catalysed cross-coupling.

General cycle (Suzuki, Negishi, Stille, Kumada)

graph TD
    A["Pd(0)L2
14 e"] -->|"+ Ar-X, oxidative addition"| B["Ar-Pd(II)(X)L2
16 e"] B -->|"+ R-M', transmetallation
(- M'X)"| C["Ar-Pd(II)(R)L2
trans, then cis"] C -->|"reductive elimination"| D["Ar-R"] C --> A
ReactionNucleophilic partner R–M′Note
Suzuki–MiyauraArB(OH)₂ or boronate esterbase required to activate boron; non-toxic by-products
NegishiR–ZnXhigh reactivity, functional-group tolerant
StilleR–SnR′₃neutral conditions; tin by-products toxic
KumadaR–MgXNi or Pd; Grignard limits functional groups
HiyamaR–SiR′₃fluoride or base activation
Sonogashiraterminal alkyne + CuI + aminecopper acetylide transmetallates

Oxidative addition reactivity of the electrophile: Ar–I > Ar–OTf ≈ Ar–Br > Ar–Cl. Aryl chlorides need electron-rich, bulky phosphines (or NHCs). OA is often rate-determining for aryl bromides and chlorides.

Heck reaction

Ar–X + CH₂=CHR + base → ArCH=CHR (mostly E):

  1. oxidative addition of Ar–X to Pd(0);
  2. alkene coordination and syn 1,2-insertion (Ar goes to the less substituted carbon);
  3. syn β-hydride elimination gives the alkene product, mainly E;
  4. base removes HX from H–Pd–X, regenerating Pd(0) (formally a reductive elimination).

There is no transmetallation step: the alkene itself is the partner.

Other Homogeneous Processes Worth Knowing

ProcessCatalystKey steps
Hydrocyanation of butadiene to adiponitrileNi(0) phosphite complexes, Lewis-acid promoterOA of HCN, insertion, RE
Hydrosilylation of alkenesPt (Speier’s H₂PtCl₆, Karstedt’s catalyst)Chalk–Harrod: OA of Si–H, insertion, RE
Shell Higher Olefin Process (SHOP)Ni with P,O-chelating ligandsethylene oligomerisation, then isomerisation and metathesis
Alkene isomerisationmany M–H speciesinsertion/β-H elimination (“chain walking”)
Water–gas shift (homogeneous models)metal carbonylsOH⁻ attack on CO, CO₂ loss, H₂ release

Memory Tricks

Don’t Confuse

ThisvsThat
Monsanto (Rh): RDS = OA of CH₃ICativa (Ir): RDS = migratory insertion
Hydroformylation: alkene + CO + H₂ → aldehydeHydrogenation: alkene + H₂ → alkane
Wacker: Pd(II)/Pd(0), alkene oxidised to aldehyde/ketoneHeck: Pd(0)/Pd(II), aryl–alkene C–C coupling
Ziegler–Natta: alkene insertion into M–C (Cossee–Arlman)Metathesis: [2+2] to metallacyclobutane (Chauvin)
Wilkinson’s RhCl(PPh₃)₃ (hydrogenation)Wilkinson’s HRh(CO)(PPh₃)₃ (hydroformylation)
TON: total turnovers (dimensionless)TOF: turnovers per unit time

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the oxidation state of rhodium in the species formed after the rate-determining step of the Monsanto process?
  2. Name the intermediate ring formed in the Chauvin mechanism of alkene metathesis.
  3. What is the electron count of [Cp₂ZrMe]⁺?
Answers
  1. +3: [CH₃RhI₃(CO)₂]⁻ after oxidative addition of CH₃I to Rh(I).
  2. A metallacyclobutane.
  3. 14: Zr 4 + 2 Cp 10 + CH₃ 1 − 1 (positive charge) = 14. Zr(IV), d⁰.

Level 2: Part B Style

Practice Q1. Which reaction is not catalysed by Wilkinson’s catalyst, RhCl(PPh₃)₃, under its usual mild conditions?

(a) hydrogenation of 1-hexene (b) hydrogenation of cyclohexene (c) hydrogenation of benzene to cyclohexane (d) hydrogenation of a terminal alkene in the presence of an ester group

Answer: (c)

Wilkinson’s catalyst reduces unhindered alkenes and tolerates esters, ketones and nitro groups. Arenes are not reduced under its normal conditions.

Practice Q2. In the cobalt-catalysed hydroformylation cycle, the step that converts an 18-electron alkyl tetracarbonyl into a 16-electron acyl tricarbonyl is:

(a) oxidative addition (b) migratory insertion of CO (c) β-hydride elimination (d) reductive elimination

Answer: (b)

RCH₂CH₂Co(CO)₄ (18 e⁻) → RCH₂CH₂C(O)Co(CO)₃ (16 e⁻). The alkyl migrates to a cis CO; OS unchanged (Co(I)); count −2.

Practice Q3. An ansa-zirconocene of C₂ symmetry, activated by MAO, polymerises propylene. The polymer is mainly:

(a) atactic (b) isotactic (c) syndiotactic (d) polyethylene, because propylene does not insert

Answer: (b) isotactic

In a C₂-symmetric catalyst the two coordination sites are homotopic: each insertion chooses the same propylene face, giving the same configuration at every stereocentre. C_s catalysts alternate faces (syndiotactic); C₂v catalysts give no control (atactic).

Practice Q4. A Suzuki coupling uses Pd(PPh₃)₄, 4-bromoanisole and phenylboronic acid with K₂CO₃. Which statement is correct?

(a) The base is needed for the oxidative addition step. (b) Pd(PPh₃)₄ itself adds ArBr without losing any ligand. (c) Transmetallation transfers the phenyl group from boron to Pd(II). (d) The product is formed by β-hydride elimination.

Answer: (c)

The base forms a boronate (or a Pd–OR species) that enables transmetallation of Ph from B to Pd(II). Pd(PPh₃)₄ (18 e⁻) must lose PPh₃ ligands before oxidative addition. The biaryl forms by reductive elimination.

Level 3: Part C Style

Practice Q5. A hydrogenation uses 0.050 mol% of a rhodium catalyst (relative to substrate) and reaches 98% conversion in 30 min, after which the catalyst is still active. Which values are correct for this run?

(a) TON = 1960; average TOF ≈ 3920 h⁻¹ ≈ 1.09 s⁻¹ (b) TON = 196; TOF ≈ 392 h⁻¹ (c) TON = 1960; TOF ≈ 980 h⁻¹ (d) TON = 2000; TOF ≈ 1.09 h⁻¹

Answer: (a)

Catalyst : substrate = 0.050% = 5.0 × 10⁻⁴. Product per catalyst: \( 0.98 / (5.0 \times 10^{-4}) = 1960 \).

TOF = 1960 / 0.5 h = 3920 h⁻¹ = 3920 / 3600 s⁻¹ ≈ 1.09 s⁻¹.

This TON is a lower limit for the catalyst’s lifetime: the catalyst was still active when the substrate ran out.

Practice Q6. In a model rhodium hydroformylation, 1000 mol of propene is fed; conversion is 90%, selectivity to aldehydes is 95% (the rest gives propane), and the n : iso ratio is 19 : 1. Which statements are correct?

  1. About 812 mol of butanal is formed.
  2. About 43 mol of 2-methylpropanal is formed.
  3. 45 mol of propene is hydrogenated to propane.
  4. Raising the PPh₃ concentration would be expected to lower n : iso.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

Converted: 900 mol. Aldehydes: \( 900 \times 0.95 = 855 \) mol; propane: \( 900 \times 0.05 = 45 \) mol.

n fraction \( = 19/20 = 0.95 \): butanal \( = 855 \times 0.95 = 812.25 \) mol; 2-methylpropanal \( = 855 \times 0.05 = 42.75 \) mol.

Statement 4 is wrong: excess PPh₃ keeps more bulky phosphines on rhodium and raises the linear selectivity (at some cost in rate).

Practice Q7. For a rhodium-catalysed methanol carbonylation run under industrial-type conditions, a student records: (i) doubling CO pressure leaves the rate unchanged; (ii) doubling [CH₃I] doubles the rate; (iii) the catalyst resting state, seen by IR, is [RhI₂(CO)₂]⁻. Which conclusions are consistent?

  1. Oxidative addition of CH₃I is rate-determining.
  2. The resting state is the species that precedes the RDS.
  3. Switching to iridium would be expected to make migratory insertion rate-determining.
  4. The rate law predicts first-order dependence on methanol concentration.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Correct. First order in CH₃I, zero order in CO.
  2. Correct. If OA is slow, the Rh(I) complex accumulates before it: the resting state is [RhI₂(CO)₂]⁻.
  3. Correct. In the Cativa system OA to iridium is fast, and migratory insertion becomes rate-limiting.
  4. Wrong. Methanol is converted to CH₃I by HI in a fast equilibrium; the rate law contains [CH₃I], not [CH₃OH], and is zero order in methanol at constant iodide.

As a yield check, ideal conversion of 1.00 t of methanol gives \( 60.05/32.04 \approx 1.87 \) t of acetic acid.

Practice Q8. An asymmetric hydrogenation gives the (S)-amino acid derivative and its (R)-enantiomer in a 96 : 4 ratio. NMR shows that the catalyst–substrate adduct leading to the (R) product is the more abundant one in solution. Which statements are correct?

  1. The enantiomeric excess is 92%.
  2. The major diastereomeric adduct reacts more slowly with H₂ than the minor adduct.
  3. The product ratio is set by the equilibrium ratio of the two adducts.
  4. This is the behaviour Halpern described for Rh–diphosphine catalysts.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 4 only
  1. Correct. \( \text{ee} = (96 - 4)/(96 + 4) \times 100\% = 92\% \).
  2. Correct. The adduct leading to (R) is more abundant, yet (R) is the minor product, so that adduct must react more slowly.
  3. Wrong. If the equilibrium ratio decided the outcome, (R) would be the major product. The relative rates of H₂ addition to the two adducts decide (Curtin–Hammett).
  4. Correct. Halpern’s major–minor principle.

Quick Revision Table

ProcessCatalystKey fact
HydrogenationRhCl(PPh₃)₃PPh₃ loss → H₂ OA → alkene → insertion (slow) → RE; syn addition; unhindered alkenes
Asymmetric hydrogenationRh–DIPAMP (Knowles), Ru–BINAP (Noyori)major adduct gives minor product (Halpern)
HydroformylationHCo(CO)₄; HRh(CO)(PPh₃)₃Roelen 1938; Rh: milder, higher n : iso
Monsanto[RhI₂(CO)₂]⁻ + HIRDS = OA of CH₃I; rate = k[Rh][CH₃I]
Cativa[IrI₂(CO)₂]⁻ + promotersRDS = migratory insertion
WackerPdCl₂/CuCl₂/O₂no D from D₂O in CH₃CHO; rate ∝ 1/([H⁺][Cl⁻]²)
Ziegler–NattaTiCl₄/AlEt₃Cossee–Arlman insertion at vacant site
MetalloceneCp₂ZrCl₂ + MAO → [Cp₂ZrMe]⁺14 e⁻ d⁰; C₂ iso, C_s syndio
MetathesisSchrock Mo; Grubbs RuChauvin metallacyclobutane; RCM, ROMP, CM
Cross-couplingPd(0)L₂OA, transmetallation, RE; Ar–I > OTf ≈ Br > Cl
HeckPd(0) + baseOA, syn insertion, syn β-H elimination; E product
MetricsTON = mol P / mol cat; TOF = TON / t; ee = (R − S)/(R + S)

Key Takeaways

What’s Next

Advertisement
Advertisement