Cycloaddition Reactions: Diels–Alder, 1,3-Dipolar and [2+2]
CSIR NET organic chemistry: cycloaddition selection rules, Diels–Alder endo rule and regiochemistry, 1,3-dipolar and ketene [2+2] cycloadditions, FMO gaps.
- 17 min
On this page · 14 sections
Prerequisites
- Orbital Symmetry and Electrocyclic Reactions: HOMO/LUMO phases, the Hückel–Möbius count, what “allowed” means.
- Hückel Theory for Conjugated π Systems: coefficients, which decide regiochemistry.
- Stereospecific and Stereoselective Reactions: suprafacial addition and the vocabulary of diastereoselectivity.
- Benzynes (Arynes): arynes are among the best dienophiles in the trapping experiments used later on this page.
The Hook: Why Is the Endo Adduct Formed?
Notation and the General Selection Rule
A cycloaddition is labelled by the number of electrons (or atoms) each component brings: \( [m + n] \). In the full Woodward–Hoffmann notation each component is written with its type (π, σ, ω for a lone pair), electron count and face:
- s (suprafacial): both new bonds form on the same face of that component.
- a (antarafacial): the new bonds form on opposite faces.
The Diels–Alder reaction is \( [_{\pi}4_s + {}_{\pi}2_s] \).
Apply it:
| Reaction | Components | Count of \( (4q+2)_s \) + \( (4r)_a \) | Thermal |
|---|---|---|---|
| [4s + 2s] Diels–Alder | 4s (no), 2s (yes) | 1 (odd) | allowed |
| [2s + 2s] | 2s, 2s | 2 (even) | forbidden (hν allowed) |
| [2s + 2a] | 2s (yes), 2a (no) | 1 | allowed, but geometrically hard |
| [4s + 4s] | 0 | 0 | forbidden (hν allowed) |
| [6s + 4s] | 6s (yes) | 1 | allowed |
| [8s + 2s] | 2s (yes) | 1 | allowed |
| [4s + 4a] | 4a (yes) | 1 | allowed, rarely possible |
For suprafacial-suprafacial cycloadditions this collapses to a simple rule: \( 4n + 2 \) total electrons → thermal; \( 4n \) → photochemical.
The FMO picture
Take the HOMO of one component and the LUMO of the other; both terminal overlaps must be bonding.
| Pair | HOMO termini | LUMO termini | Supra/supra overlap | Verdict (Δ) |
|---|---|---|---|---|
| Butadiene HOMO (ψ₂) + ethylene LUMO (π*) | out of phase | out of phase | both bonding | allowed |
| Ethylene HOMO (π) + ethylene LUMO (π*) | in phase | out of phase | one bonding, one antibonding | forbidden |
| Ethylene excited (π*, now singly occupied) + ethylene LUMO (π*) | out of phase | out of phase | both bonding | allowed (hν) |
It does not matter which partner supplies the HOMO: for the allowed case both HOMO–LUMO combinations work.
The correlation-diagram version of [2s + 2s] uses two mirror planes; the bonding combination of the two π orbitals correlates with an antibonding σ combination of the cyclobutane, so the ground state goes to a doubly excited state. The aromatic-TS version is quicker: a [2s + 2s] TS is a Hückel array of 4 electrons, antiaromatic, forbidden.
The Diels–Alder Reaction
graph TD
A["Diene (s-cis)
4 pi electrons"] --> C["Concerted, suprafacial
on both components"]
B["Dienophile
2 pi electrons"] --> C
C --> D["Cyclohexene
two new sigma bonds
up to four new stereocentres"]
D -->|"heat (retro-Diels-Alder)"| ARequirements and reactivity
- The diene must reach the s-cis conformation. Cyclic dienes locked s-cis (cyclopentadiene, furan, cyclohexa-1,3-diene) are very reactive; dienes with a bulky (Z)-1-substituent, or 2,3-di-tert-butylbutadiene, struggle to reach it.
- Normal electron demand: electron-rich diene (donors such as OMe, NR₂, OSiR₃, alkyl) with an electron-poor dienophile (CHO, COR, CO₂R, CN, NO₂; maleic anhydride, tetracyanoethylene, benzoquinone). The dominant interaction is HOMO(diene)–LUMO(dienophile).
- Inverse electron demand: electron-poor diene (1,2,4,5-tetrazines, 1,2,4-triazines, 2-pyrones) with an electron-rich dienophile (enol ethers, enamines, strained alkenes). Dominant interaction: LUMO(diene)–HOMO(dienophile).
- The smaller the relevant HOMO–LUMO gap, the faster the reaction.
Stereospecificity: the cis principle
Both components react suprafacially, so geometry is kept:
| Input | Output |
|---|---|
| cis-dienophile (dimethyl maleate) | substituents cis on the cyclohexene |
| trans-dienophile (dimethyl fumarate) | substituents trans |
| (E,E)-1,4-disubstituted diene | the two “outside” groups end up cis to each other |
| (E,Z)-diene | they end up trans |
The endo rule
When a dienophile carries a π substituent (C=O, CN), the endo TS (substituent under the diene) is usually preferred over the exo TS, even though the exo product is often more stable. The classic explanation is secondary orbital interaction: in the endo TS the π orbital of the substituent overlaps with the C2/C3 lobes of the diene HOMO in a bonding way. No bond forms there, but the TS is lowered. Better electrostatic and dispersion interactions in the more compact endo TS also contribute.
| Condition | Typical outcome |
|---|---|
| Kinetic control, low temperature | endo major |
| Lewis acid catalyst | endo selectivity usually increases |
| Reversible reaction, long time or heat | equilibrates toward the more stable exo |
| Furan + maleic anhydride (easily reversible) | exo adduct isolated |
In the bicyclic adduct from a cyclic diene, “endo” means the substituent points toward the larger (unsaturated) bridge, i.e. syn to the new C=C, away from the one-atom CH₂ bridge.
Regiochemistry: the “ortho” and “para” rules
| Diene substituent | Dienophile (EWG) | Major product | Name |
|---|---|---|---|
| 1-donor (1-methoxybutadiene) | acrolein | 1,2-disubstituted cyclohexene (2-methoxycyclohex-3-ene-1-carbaldehyde) | “ortho” |
| 2-donor (isoprene, 2-methoxybutadiene) | methyl acrylate | 1,4-disubstituted (methyl 4-methylcyclohex-3-ene-1-carboxylate) | “para” |
| 1-donor | 1,3 (“meta”) | minor |
FMO reasoning: bonds form fastest between the atoms with the largest coefficients in the interacting HOMO and LUMO. A donor at C1 of the diene makes the HOMO coefficient largest at C4; an acceptor on the dienophile makes the LUMO coefficient largest at the β-carbon (the CH₂ of acrolein). Joining C4 to the β-carbon puts the donor and acceptor on adjacent carbons (“ortho”). A 2-donor makes C1 the largest, which leads to “para”.
A quick check without coefficients: draw the zwitterionic resonance forms. The diene’s most nucleophilic terminus bonds to the dienophile’s most electrophilic carbon.
With an (E)-1-substituted diene, the endo rule and the ortho rule together give the cis-“ortho” product (donor and acceptor cis and adjacent).
Lewis acids, water and catalysis
- Lewis acids (AlCl₃, BF₃·OEt₂, Et₂AlCl, SnCl₄) bind the dienophile carbonyl, lower its LUMO and enlarge the β-coefficient: faster, more endo, more regioselective. Chiral Lewis acids make the reaction enantioselective.
- Water accelerates many Diels–Alder reactions relative to organic solvents (hydrophobic packing and hydrogen bonding to the TS).
Important dienes and dienophiles
| Reagent | Role | Why it matters |
|---|---|---|
| Cyclopentadiene | diene | very reactive; dimerises on standing to dicyclopentadiene; recovered by heating (retro-Diels–Alder) and distilling |
| Danishefsky’s diene (1-methoxy-3-trimethylsilyloxybutadiene) | electron-rich diene | adducts hydrolyse to cyclohex-2-enones; with aldehydes (Lewis acid) gives dihydropyranones |
| Furan | diene | reversible; gives 7-oxabicyclo[2.2.1]heptenes |
| Anthracene | diene (C9, C10) | adds dienophiles across the central ring; with benzyne gives triptycene |
| 2-Pyrone | electron-poor diene | adds alkynes, then loses CO₂ (retro-Diels–Alder) → benzene ring |
| 1,2,4,5-Tetrazine | inverse-demand diene | adds alkenes/alkynes, loses N₂ → dihydropyridazine / pyridazine; very fast with strained alkenes |
| Maleic anhydride, TCNE, benzoquinone, DMAD | dienophiles | strongly electron-poor |
| Benzyne | dienophile | traps furan, anthracene, cyclopentadiene |
| Singlet oxygen, nitroso compounds, imines, aldehydes | hetero-dienophiles | endoperoxides, 1,2-oxazines, tetrahydropyridines, dihydropyrans |
Hetero-Diels–Alder reactions (C=O, C=N, N=O, O=O as one of the components) follow the same rules. Singlet-oxygen [4+2] chemistry is covered under organic photochemistry.
Intramolecular and retro reactions
- Intramolecular Diels–Alder (IMDA): a diene and dienophile joined by a 3- or 4-atom tether give fused bicyclic systems (hydrindanes, decalins). Tether geometry often overrides the endo rule.
- Retro-Diels–Alder: favoured at high temperature (entropy) and when a very stable small molecule is released: cyclopentadiene from its dimer, N₂ from tetrazine adducts, CO₂ from pyrone adducts, ethylene or acetylene from some bicyclic adducts. In mass spectrometry the same fragmentation is a characteristic cleavage of cyclohexenes.
1,3-Dipolar Cycloadditions
A 1,3-dipole is a three-atom, 4π-electron unit that can be drawn with charges at the 1,3-positions; it adds to a dipolarophile (alkene or alkyne, 2π) to give a five-membered heterocycle. Classification: \( [_{\pi}4_s + {}_{\pi}2_s] \), thermally allowed, like the Diels–Alder (Huisgen).
| Dipole | Type | Formula sketch | + alkene gives | + alkyne gives |
|---|---|---|---|---|
| Azide | linear (propargyl/allenyl) | R–N=N⁺=N⁻ | triazoline | 1,2,3-triazole |
| Diazoalkane | linear | R₂C=N⁺=N⁻ | 1-pyrazoline (can lose N₂ → cyclopropane) | pyrazole (after tautomerisation) |
| Nitrile oxide | linear | R–C≡N⁺–O⁻ | isoxazoline (2-isoxazoline) | isoxazole |
| Nitrile imine, nitrile ylide | linear | pyrazoline, pyrroline | ||
| Nitrone | bent (allyl) | R₂C=N⁺(R)–O⁻ | isoxazolidine | 4-isoxazoline |
| Azomethine ylide | bent | R₂C=N⁺(R)–C⁻R₂ | pyrrolidine | 3-pyrroline |
| Carbonyl ylide | bent | R₂C=O⁺–C⁻R₂ | tetrahydrofuran | |
| Ozone | bent | O=O⁺–O⁻ | 1,2,3-trioxolane (primary ozonide) |
Features
- Stereospecific with respect to the dipolarophile: a cis-alkene gives cis substituents on the new ring.
- Regiochemistry follows FMO coefficients, and the dominant interaction can switch with substituents (Sustmann’s classification: HOMO(dipole)-controlled, LUMO(dipole)-controlled, or both). This is why simple thermal azide–alkyne additions often give mixtures of 1,4- and 1,5-triazoles.
- Copper(I)-catalysed azide–alkyne cycloaddition (CuAAC, “click”) gives the 1,4-disubstituted triazole only; it goes stepwise through copper acetylides and is not a pericyclic reaction. Ruthenium catalysis (RuAAC) gives the 1,5 isomer.
- Nitrile oxides (from oximes by chlorination and base, or from nitroalkanes by dehydration) give isoxazolines, which are masked β-hydroxy ketones (N–O reductive cleavage).
Ozonolysis as two 1,3-dipolar steps (Criegee)
graph TD
A["Alkene + O3"] -->|"[3+2] cycloaddition"| B["Primary ozonide
(1,2,3-trioxolane)"]
B -->|"retro-[3+2]"| C["Carbonyl compound +
carbonyl oxide (1,3-dipole)"]
C -->|"[3+2] recombination,
opposite orientation"| D["Secondary ozonide
(1,2,4-trioxolane)"]
D -->|"Me2S or Zn/AcOH"| E["Aldehydes / ketones"]
D -->|"H2O2"| F["Carboxylic acids / ketones"][2+2] Cycloadditions
Thermal [2+2]: the ketene exception
Ketenes add to alkenes thermally to give cyclobutanones. A ketene has two orthogonal π systems; its C=O π* (LUMO, large coefficient at the central carbon) can take part antarafacially while the alkene reacts suprafacially, \( [_{\pi}2_s + {}_{\pi}2_a] \), in a crossed geometry with small steric demand at the linear ketene carbon.
| Feature | Detail |
|---|---|
| Stereochemistry | stereospecific with respect to the alkene (cis-alkene → cis-substituted cyclobutanone) |
| Regiochemistry | the ketene’s central (carbonyl) carbon bonds to the more nucleophilic alkene carbon |
| Best ketenes | dichloroketene (from trichloroacetyl chloride + Zn, or dichloroacetyl chloride + Et₃N) |
| Classic example | dichloroketene + cyclopentadiene → 7,7-dichlorobicyclo[3.2.0]hept-2-en-6-one (Zn/AcOH removes Cl) |
| With dienes | ketenes give [2+2] rather than [4+2] adducts |
Other thermal [2+2] reactions (tetracyanoethylene with enol ethers, ketene with imines in the Staudinger β-lactam synthesis, fluorinated alkenes) are usually stepwise, through zwitterions or diradicals, and can lose stereospecificity. Do not count them as concerted pericyclic examples.
Photochemical [2+2]
Alkene + alkene under hν gives cyclobutanes; enones are the workhorse substrates; carbonyl + alkene gives oxetanes (Paternò–Büchi). Because most of these proceed through triplet states and 1,4-diradicals, they are discussed on the organic photochemistry page.
Higher-Order Cycloadditions
| Reaction | Electrons | Thermal supra-supra? | Example |
|---|---|---|---|
| [4+4] | 8 | no; photochemical | anthracene photodimer across C9/C10 |
| [6+4] | 10 | yes | tropone (6π) + cyclopentadiene (4π) gives a bridged [6+4] adduct |
| [8+2] | 10 | yes | 8π components such as heptafulvenes with electron-poor alkynes |
| [6+2] | 8 | no; photochemical or metal-mediated |
Periselectivity: when a reagent could react through different numbers of electrons (tropone as 2π, 4π or 6π), the allowed and best-overlapping mode wins. For [6+4], secondary orbital interactions in the endo TS are antibonding, so the exo adduct is favoured: the opposite of the Diels–Alder endo rule.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Normal demand: HOMO(diene)–LUMO(dienophile) | Inverse demand: LUMO(diene)–HOMO(dienophile) (tetrazines, pyrones) | |
| Endo: kinetic, secondary orbital overlap (Diels–Alder) | Exo: thermodynamic; also the favoured mode for [6+4] | |
| Ketene + alkene: concerted \( [2_s + 2_a] \), stereospecific | TCNE + enol ether, Staudinger ketene–imine: stepwise, may scramble | |
| Thermal azide–alkyne: 1,4 + 1,5 mixture, pericyclic | CuAAC: 1,4 only, stepwise metal-catalysed | |
| Primary ozonide (1,2,3-trioxolane) | Secondary ozonide (1,2,4-trioxolane) | |
| [4+2] thermal, [2+2] photochemical | [4+4] photochemical, [6+4] thermal |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Write the Woodward–Hoffmann descriptor of the Diels–Alder reaction.
- Is a thermal [6s + 4s] cycloaddition allowed?
- Which heterocycle forms from a nitrile oxide and an alkene?
Answers
- \( [_{\pi}4_s + {}_{\pi}2_s] \).
- Yes: 10 electrons (\( 4n + 2 \)); one \( (4q+2)_s \) component (the 6s), odd count.
- A 2-isoxazoline (4,5-dihydroisoxazole).
Level 2: Part B Style
Practice Q1. (E)-1-Methoxybuta-1,3-diene reacts with acrolein at low temperature. The major product is:
(a) trans-2-methoxycyclohex-3-ene-1-carbaldehyde (b) cis-2-methoxycyclohex-3-ene-1-carbaldehyde (c) 4-methoxycyclohex-3-ene-1-carbaldehyde (d) cis-3-methoxycyclohex-4-ene-1-carbaldehyde (“meta”)
Answer: (b)
“Ortho” rule: C4 of the 1-donor diene (largest HOMO coefficient) bonds to the β-carbon of acrolein, putting OMe and CHO on adjacent carbons. Endo approach places the CHO on the same side as the “outside” OMe: cis.
Practice Q2. Which reaction is thermally allowed as a concerted process?
(a) \( [_{\pi}2_s + {}_{\pi}2_s] \) (b) \( [_{\pi}4_s + {}_{\pi}4_s] \) (c) \( [_{\pi}2_s + {}_{\pi}2_a] \) (d) \( [_{\pi}6_s + {}_{\pi}2_s] \)
Answer: (c)
Count \( (4q+2)_s \) + \( (4r)_a \): (a) 2, (b) 0, (c) 1, (d) 2 (6s and 2s are both \( 4q + 2 \), suprafacial). Only (c) is odd. This is the mode used by ketenes.
Practice Q3. Dichloroketene, generated from trichloroacetyl chloride and zinc in the presence of cyclopentadiene, gives mainly:
(a) a [4+2] adduct, a 2-oxabicyclo[2.2.2]octene (b) 7,7-dichlorobicyclo[3.2.0]hept-2-en-6-one (c) 2,2-dichlorocyclopent-3-enone (d) a 1,3-dipolar adduct
Answer: (b)
Ketenes give [2+2] cyclobutanones even with dienes. One C=C of cyclopentadiene adds across the C=C of the ketene. The ketene carbonyl carbon bonds to the cyclopentadiene carbon next to the CH₂ group (attack there leaves an allyl cation in the zwitterion-like TS), and the CCl₂ carbon bonds to the carbon next to the remaining C=C, which gives the fused bicyclo[3.2.0] skeleton.
Practice Q4. A substituted alkyne and an organic azide are heated without catalyst, and separately treated with CuSO₄/sodium ascorbate at room temperature. Which statement is correct?
(a) Both give only the 1,4-triazole. (b) The thermal reaction gives a mixture of 1,4- and 1,5-triazoles; the copper reaction gives the 1,4-isomer. (c) The copper reaction gives the 1,5-isomer. (d) Neither reaction is regioselective.
Answer: (b)
The thermal Huisgen cycloaddition is a concerted 1,3-dipolar reaction with similar FMO coefficients at both alkyne carbons, so regioselectivity is poor. CuAAC is stepwise through copper acetylides and gives only the 1,4-isomer; ruthenium catalysis gives 1,5.
Level 3: Part C Style
Practice Q5. Illustrative FMO energies (eV):
| Species | HOMO | LUMO |
|---|---|---|
| Diene D1 (electron-rich) | −8.5 | +2.0 |
| Dienophile E1 (acrylate-type) | −10.7 | 0.0 |
| Diene D2 (tetrazine-type) | −10.5 | −1.5 |
| Dienophile E2 (enol ether) | −8.8 | +2.5 |
Which statements are correct?
- D1 + E1 is a normal-demand reaction with a controlling gap of 8.5 eV.
- D2 + E2 is an inverse-demand reaction with a controlling gap of 7.3 eV.
- D2 + E2 is expected to be faster than D1 + E1, other factors being equal.
- For D1 + E2 the controlling gap is 10.8 eV, larger than for D1 + E1.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (d)
D1 + E1: normal gap \( 0.0 - (-8.5) = 8.5 \) eV; inverse \( 2.0 - (-10.7) = 12.7 \) eV; controlling 8.5 (1 correct). D2 + E2: normal \( 2.5 - (-10.5) = 13.0 \); inverse \( -1.5 - (-8.8) = 7.3 \) eV (2 correct). 7.3 < 8.5, so D2 + E2 is predicted faster (3 correct). D1 + E2: normal \( 2.5 - (-8.5) = 11.0 \) eV; inverse \( 2.0 - (-8.8) = 10.8 \) eV; controlling 10.8 eV, larger than 8.5 (4 correct). Two electron-rich partners give a large gap whichever way they are paired, which is why two donors react sluggishly.
Practice Q6. Cyclopentadiene and dimethyl maleate react at 25 °C. (Illustrative data.) The endo TS is lower than the exo TS by 5.0 kJ mol⁻¹. Which conclusions are consistent?
- The endo : exo ratio under kinetic control is about 7.5 : 1 (about 88 % endo).
- Both adducts have the two ester groups cis to each other.
- Heating the mixture for a long time in a sealed tube may increase the exo fraction.
- The endo adduct has the ester groups syn to the CH₂ bridge.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a)
1: \( \exp(5000/(8.314 \times 298)) = \exp(2.02) \approx 7.5 \); fraction endo \( = 7.5/8.5 \approx 0.88 \). Correct. 2: cis principle: maleate is cis, so the esters stay cis in both adducts. Correct. 3: a retro-Diels–Alder/re-addition at higher temperature lets the system move toward the more stable exo adduct. Correct. 4: endo esters point toward the C=C bridge, i.e. anti to the CH₂ bridge. Incorrect.
Practice Q7. An alkene C₆H₁₂ is ozonised and the ozonide treated with dimethyl sulfide; only one product, C₃H₆O, is obtained, which gives no silver mirror. Separately, the same alkene does not react with a nitrile oxide at room temperature but reacts on heating. Which statements are correct?
- The alkene is 2,3-dimethylbut-2-ene.
- The secondary ozonide is a 1,2,4-trioxolane formed by recombination of acetone with acetone oxide.
- Ozonolysis involves two [3+2] cycloadditions and one retro-[3+2] step.
- The nitrile oxide reaction gives a 2-isoxazoline with two quaternary ring carbons.
(a) 1, 2, 3 and 4 (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2 and 3 only
Answer: (a)
One C₃H₆O product that is not an aldehyde: acetone, so the alkene is the symmetric tetrasubstituted Me₂C=CMe₂ (1). Criegee: [3+2] to the primary ozonide, retro-[3+2] to acetone + acetone oxide, [3+2] recombination to the 1,2,4-trioxolane (2, 3). The tetrasubstituted alkene is a sluggish dipolarophile; once it reacts, C4 and C5 of the isoxazoline each carry two methyls (4).
Quick Revision Table
| Topic | Key facts |
|---|---|
| General rule | odd number of \( (4q+2)_s \) + \( (4r)_a \) components → thermal |
| Supra-supra | 6, 10 electrons Δ; 4, 8 electrons hν |
| Diels–Alder | \( [4_s + 2_s] \), s-cis diene, cis principle, endo kinetic |
| Electron demand | normal: HOMO diene/LUMO dienophile; inverse: tetrazine, pyrone, triazine dienes |
| Regiochemistry | 1-substituted diene → ortho; 2-substituted → para; largest coefficients bond |
| Lewis acid | lowers LUMO; faster, more endo, more regioselective |
| Retro-DA | dicyclopentadiene cracking; −CO₂ (pyrone), −N₂ (tetrazine) |
| 1,3-Dipoles | linear: azide, diazo, nitrile oxide; bent: nitrone, azomethine ylide, carbonyl ylide, ozone |
| Products | azide + alkyne → triazole; nitrile oxide → isoxazoline; nitrone → isoxazolidine |
| Click | CuAAC 1,4; RuAAC 1,5; thermal mixture |
| Ozonolysis | [3+2], retro-[3+2], [3+2]: primary → secondary ozonide |
| Ketene [2+2] | \( [2_s + 2_a] \), cyclobutanones, dichloroketene + Cp |
| Higher order | [4+4] hν (anthracene dimer); [6+4] Δ, exo (tropone + Cp); [8+2] Δ |
Key Takeaways
What’s Next
- Next topic: Sigmatropic Rearrangements: one σ bond moving across a π system.
- Previous: Orbital Symmetry and Electrocyclic Reactions.
- Cheletropic additions (SO₂, carbenes) as cycloaddition cousins: Ene, Cheletropic and Other Concerted Reactions.
- Arynes as dienophiles: Benzynes (Arynes).