Skip to content

Ene, Cheletropic and Other Concerted Reactions

CSIR NET organic chemistry: ene and retro-ene reactions, cheletropic SO2 and CO, carbenes, diimide transfer, syn (Ei) eliminations and Bergman cyclisation.

  • 16 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Butadiene in a Bottle
  3. The Ene Reaction
  4. Cheletropic Reactions
  5. Group Transfer Reactions
  6. Pyrolytic Syn (Ei) Eliminations
  7. Bergman Cyclisation and Other Concerted Reactions
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Butadiene in a Bottle

The Ene Reaction

Ene reaction (Alder-ene)
A concerted reaction between an alkene bearing an allylic hydrogen (the ene) and an electron-poor π component (the enophile). A new σ bond forms between the ene terminus and the enophile, the ene double bond shifts by one position, and the allylic hydrogen is transferred to the other end of the enophile.
$$\text{H–CH}_2\text{–CH}{=}\text{CH}_2 + \text{X}{=}\text{Y} \longrightarrow \text{CH}_2{=}\text{CH–CH}_2\text{–X–Y–H}$$
  • Six electrons (the C–H σ bond, the ene π bond, the enophile π bond) in a cyclic, envelope-shaped TS: \( [_{\sigma}2_s + {}_{\pi}2_s + {}_{\pi}2_s] \), three \( (4q+2)_s \) components, thermally allowed.
  • It is the Diels–Alder with the diene’s second π bond replaced by an allylic C–H bond, which is why unactivated thermal ene reactions need much higher temperatures than Diels–Alder reactions.
  • It shows a significant primary kinetic isotope effect (C–H breaking in the TS) and is suprafacial on the ene.

Enophiles and variants

VariantEnophileConditionsProduct
Alder-enemaleic anhydride, acrylates, DMAD, azodicarboxylatesheatallylsuccinic anhydride etc. (propene + maleic anhydride → allylsuccinic anhydride)
Carbonyl-enealdehydes (formaldehyde, glyoxylates, chloral)Lewis acid (Me₂AlCl, SnCl₄) or heathomoallylic alcohol
Imino-ene, nitroso-eneimines, ArN=Oallylic amines, N-allyl hydroxylamines
Schenck enesinglet oxygen ¹O₂photosensitisedallylic hydroperoxide (reduce → allylic alcohol)
Conia-eneenol of a ketone acts as the ene; a tethered alkene or alkyne is the enophileheat (or metal catalysis in modern variants)cyclic ketone with a new ring (methylene- or methylcyclopentane unit)
Metallo-eneallylmetal (Mg, Pd) as the ene component; the metal plays the role of Hcyclisations, often intramolecular

The thermal ene reaction of β-pinene with formaldehyde, giving the homoallylic alcohol nopol, is a classic industrial example of the carbonyl-ene.

Selectivity

  • Regiochemistry: the new C–C bond forms at the ene terminus remote from the transferred H; the double bond moves toward the carbon that lost H.
  • Hydrogen choice: only H atoms that can align with the π system in the envelope TS react.
  • Stereochemistry: an endo-type TS (enophile substituent under the ene) is often preferred, as in the Diels–Alder. Lewis-acid-catalysed carbonyl-ene reactions can be made highly enantioselective.

Intramolecular ene reactions

When ene and enophile are tethered, five- and six-membered rings form under much milder conditions than the intermolecular reaction, because the entropy cost is lower. The Conia-ene is the most frequently examined example: a 1,6-enone or 1,6-ynone (or alkynyl β-keto ester), via its enol, closes to a methylenecyclopentane bearing the ketone.

Retro-ene fragmentations

The reverse reaction breaks a C–C bond and transfers an H in a six-membered cyclic TS:

Retro-eneSubstrateProducts
Homoallylic alcohol fragmentationCH₂=CH–CH₂–C(OH)R₂ (heat)propene + R₂C=O
Decarboxylation of β-keto acids and malonic acidsR–CO–CH₂–COOHCO₂ + enol → ketone
Ester pyrolysis (Ei, below)R₂CH–CR₂–O–C(O)CH₃alkene + CH₃COOH
Allyl or propargyl ether fragmentationsalkene + carbonyl

The decarboxylation of malonic and β-keto acids (as in the malonic-ester and acetoacetic-ester syntheses) is a retro-ene: the carbonyl oxygen receives the carboxyl H through a six-membered ring, and the enol tautomerises.

Cheletropic Reactions

Cheletropic reaction
A pericyclic reaction in which two σ bonds are made or broken to the same atom. Additions are cycloaddition-like (one component supplies a single atom with a lone pair and an empty orbital, or a lone pair); extrusions are the reverse. Examples: SO₂ with dienes, CO extrusion, singlet carbene addition to alkenes.

SO₂ and dienes

ProcessElectronsAllowed thermal mode (linear)Stereochemistry
Butadiene + SO₂ ⇌ 3-sulfolene4 (diene) + 2 (SO₂ lone pair) = 6diene suprafacial (disrotatory)cis-2,5-dimethyl-3-sulfolene → (E,E)-hexa-2,4-diene; trans → (E,Z)
Hexatriene + SO₂ ⇌ 2,7-dihydrothiepine 1,1-dioxide6 + 2 = 8triene antarafacial (conrotatory)opposite pattern to the diene case

The rule: in a linear cheletropic reaction (SO₂ approaches along the symmetry axis and uses its lone pair as a \( \omega 2_s \) component), the polyene must react suprafacially if it has 4 π electrons (total 6, one \( (4q+2)_s \) component, odd) and antarafacially if it has 6 (\( [_{\pi}6_a + {}_{\omega}2_s] \), count 1, odd).

Read the stereochemistry like an electrocyclic reaction: disrotatory motion of the termini of a cis-2,5-disubstituted sulfolene turns both substituents outward, giving E,E.

Synthetic use: sulfolenes as diene stores (the hook); alkylation of the sulfolene anion at C2 followed by SO₂ extrusion gives substituted dienes of defined geometry.

CO and N₂ extrusion

  • 7-Norbornenones and 7-norbornadienones lose CO very easily. Tetraphenylcyclopentadienone + an alkyne gives a Diels–Alder adduct that loses CO at once to give a hexasubstituted benzene (with diphenylacetylene, hexaphenylbenzene); with benzyne it gives 1,2,3,4-tetraphenylnaphthalene. The aromatic product drives the extrusion.
  • Cyclopent-3-enones lose CO only at much higher temperatures; the bridged ketones are special because loss of CO relieves strain and forms an aromatic ring.

Carbene addition as a cheletropic reaction

A singlet carbene adding to an alkene forms two σ bonds to the carbene carbon: a [2+1] cheletropic addition.

ApproachOrbital countVerdict
Linear (carbene lone pair pointing at the C=C midpoint, in the plane of symmetry)4 electrons, Hückel arrayforbidden
Non-linear (carbene approaches sideways, empty p orbital first meeting the alkene π, then swings round)allowedhow singlet carbenes actually add

Singlet additions are stereospecific (cis-alkene → cis-cyclopropane); triplet carbenes add stepwise through a 1,3-diradical and scramble. Simmons–Smith reagents behave like singlet carbenoids. See Carbenes for generation and spin states.

Group Transfer Reactions

Group transfer
A concerted reaction in which atoms (most often two hydrogens) are transferred from one molecule to another through a cyclic TS, with no new ring in the product. The ene reaction is sometimes classified here too.

Diimide reduction

cis-Diimide (HN=NH) transfers two hydrogens to the same face of a C=C (or C≡C) and releases N₂:

$$\text{HN{=}NH} + \text{R–CH{=}CH–R} \longrightarrow \text{N}_2 + \text{R–CH}_2\text{–CH}_2\text{–R}$$
FeatureDetail
Orbital description\( [_{\sigma}2_s + {}_{\sigma}2_s + {}_{\pi}2_s] \): six electrons, allowed thermally
Stereochemistrysyn addition of two H (or D)
Generationhydrazine + H₂O₂ with Cu²⁺; potassium azodicarboxylate + acetic acid; heating p-toluenesulfonylhydrazide
Selectivityreduces symmetrical, non-polar π bonds (C=C, C≡C, N=N); does not reduce C=O, C≡N, NO₂ or cleave O–O, N–O or C–halogen bonds
Ratefaster for less substituted and strained alkenes
Driving forceformation of N₂

Diimide is therefore the reagent of choice for reducing an alkene in a molecule that contains a peroxide, a nitro group or a benzyl ether, which catalytic hydrogenation would attack.

Stereochemical test (Part C favourite): DN=ND adds two D atoms syn. (Z)-But-2-ene gives meso-2,3-dideuteriobutane; (E)-but-2-ene gives the racemic (2R,3R)/(2S,3S) pair.

Other six-centre hydrogen transfers

Hydrogen transfer from 1,4-cyclohexadiene-type donors, and the Meerwein–Ponndorf–Verley/Oppenauer hydride transfers, also run through six-membered cyclic TSs, but MPV is metal-templated (aluminium alkoxide) and is not normally classified as pericyclic.

Pyrolytic Syn (Ei) Eliminations

Intramolecular eliminations in which a basic atom of the leaving group removes a β-hydrogen through a cyclic TS. All are syn eliminations and unimolecular; they are the retro-ene (six-centre) and five-centre group-transfer members of the pericyclic family.

ReactionSubstrateTS ringRelative temperature neededBy-products
Selenoxide eliminationR–Se(=O)Ph (from selenide + H₂O₂ or mCPBA)5lowest (often at or below room temperature)PhSeOH
Sulfoxide eliminationR–S(=O)Ph5higher than selenoxide (heating needed)PhSOH
Cope eliminationtertiary amine N-oxide5gentle heatingR₂NOH
Chugaevxanthate R–O–C(=S)SMe6moderateCOS + MeSH
Ester pyrolysisacetate or benzoate6highestcarboxylic acid

Stereochemistry and regiochemistry

  • The leaving group and the β-H must be syn (eclipsed or nearly so in the five-centre cases; within about 60° in the six-centre cases).
  • In cyclohexanes, only β-H atoms cis to the leaving group can be removed.
  • Regiochemistry is close to statistical: count the syn β-hydrogens on each side. This often gives substantial amounts of the less substituted (Hofmann-type) alkene, unlike E1 or E2 with small bases.
  • Selenoxide elimination next to a carbonyl is the standard way to make an α,β-unsaturated carbonyl from a saturated one (α-selenation, oxidation, syn elimination).

Bergman Cyclisation and Other Concerted Reactions

  • Bergman cyclisation: a (Z)-hex-3-ene-1,5-diyne (an enediyne) closes on heating to a 1,4-didehydrobenzene (para-benzyne diradical), which abstracts two H atoms to give benzene. It is a six-electron cyclisation using in-plane π orbitals of the alkynes. Ten-membered cyclic enediynes cyclise at body temperature; this is how the enediyne antitumour antibiotics (calicheamicin and relatives) cut DNA: the diradical abstracts H from the deoxyribose backbone.
  • Dyotropic rearrangements: two σ bonds migrate simultaneously and intramolecularly. In type I the two groups exchange positions; in type II they move to new positions. Rare in exams; recognise the name.
  • Cycloreversions: retro-Diels–Alder, retro-[3+2] (ozonolysis step), and the thermal decomposition of 1,2-dioxetanes into two carbonyl compounds, one formed in an excited state (chemiluminescence; see Organic Photochemistry).
graph TD
    A["Concerted reaction:
which bonds change?"] --> B{"One new sigma bond
at the ends of ONE pi system?"} B -->|"yes"| C["Electrocyclic"] B -->|"no"| D{"Two new sigma bonds,
ring formed?"} D -->|"to two different atoms"| E["Cycloaddition"] D -->|"both to the SAME atom"| F["Cheletropic"] D -->|"no ring formed"| G{"sigma bond moves
within one molecule?"} G -->|"yes"| H["Sigmatropic"] G -->|"H moves to enophile,
C-C bond forms"| I["Ene"] G -->|"two H move to
another molecule"| J["Group transfer
(diimide)"]

Memory Tricks

Don’t Confuse

ThisvsThat
Ene: one C–C bond forms, H transferred, ring not formed (intermolecular)Diels–Alder: two C–C bonds form, six-membered ring
Conia-ene: enol is the ene, intramolecularPrins reaction: carbonyl + alkene via carbocation, acid-catalysed, stepwise
Cheletropic: both bonds to one atom (SO₂, CO, CR₂)Cycloaddition: bonds to two different atoms
Singlet carbene: non-linear cheletropic, stereospecificTriplet carbene: stepwise diradical, non-stereospecific
Diimide: syn H₂ transfer, spares C=O, NO₂, O–OCatalytic hydrogenation: syn too, but reduces many other groups and can isomerise alkenes
Cope elimination (amine oxide, Ei)Cope rearrangement ([3,3])
Ei: syn, unimolecular, statistical regiochemistryE2: anti-periplanar, needs external base

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Give the Woodward–Hoffmann descriptor of the ene reaction.
  2. What is the stereochemistry of diimide addition to an alkene?
  3. Which diene forms when trans-2,5-dimethyl-3-sulfolene is heated?
Answers
  1. \( [_{\sigma}2_s + {}_{\pi}2_s + {}_{\pi}2_s] \).
  2. Syn (both H atoms delivered to the same face).
  3. (2E,4Z)-Hexa-2,4-diene: disrotatory motion turns one methyl out and one in.

Level 2: Part B Style

Practice Q1. Propene is heated with maleic anhydride. The product is:

(a) 4-methylcyclohex-4-ene-1,2-dicarboxylic anhydride (b) allylsuccinic anhydride (c) a cyclobutane [2+2] adduct (d) 3-methylcyclobutane-1,2-dicarboxylic anhydride

Answer: (b)

Propene has an allylic H but cannot act as a diene. In the ene reaction the terminal =CH₂ of propene bonds to one alkene carbon of the anhydride, a methyl H moves to the other, and the propene double bond shifts toward the old methyl carbon. The product is an allyl group (CH₂=CH–CH₂–) on the succinic anhydride ring: allylsuccinic anhydride.

Practice Q2. A molecule contains an isolated C=C, a ketone, a nitro group and an O–O bond. To reduce only the C=C, the best reagent is:

(a) H₂, Pd/C (b) NaBH₄ (c) potassium azodicarboxylate, AcOH (d) LiAlH₄

Answer: (c)

Potassium azodicarboxylate with acid generates diimide, which reduces the C=C by syn H transfer and leaves C=O, NO₂ and O–O intact. H₂/Pd would reduce the nitro group and cleave the peroxide; the hydrides reduce the ketone.

Practice Q3. The N,N-dimethylamine oxide of cis-2-methylcyclohexylamine is heated. The alkene formed is:

(a) 1-methylcyclohexene only (b) 3-methylcyclohexene only (c) a 1 : 1 mixture of 1- and 3-methylcyclohexene (d) methylenecyclohexane

Answer: (b)

Cope elimination is syn. In the cis isomer, the C2 hydrogen is trans to the N-oxide (the methyl is cis), so it cannot be removed. Only a C6 hydrogen cis to the leaving group is available, giving 3-methylcyclohexene.

Practice Q4. Which is a cheletropic reaction?

(a) Ozone + ethylene → primary ozonide (b) Dichlorocarbene (singlet) + cyclohexene → 7,7-dichloronorcarane (c) Ketene + cyclopentadiene → cyclobutanone (d) Cope rearrangement of hexa-1,5-diene

Answer: (b)

Both new σ bonds form to the same atom (the carbene carbon). (a) and (c) form bonds to two different atoms of the adding component; (d) is sigmatropic.

Level 3: Part C Style

Practice Q5. 2-Butyl acetate is pyrolysed. Assume purely statistical selection among the β-hydrogens. Which statements are correct?

  1. The predicted 1-butene : 2-butenes ratio is 3 : 2.
  2. The reaction is a syn elimination through a six-membered cyclic TS.
  3. The fraction of 2-butenes predicted statistically is 40 %.
  4. An E1 reaction of 2-butanol in acid would be expected to give a higher fraction of 2-butenes than the pyrolysis.

(a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4 only

Answer: (a)

C1 has 3 β-H (→ 1-butene); C3 has 2 β-H (→ 2-butenes). Ratio 3 : 2 (1); fraction of 2-butenes \( 2/5 = 40\% \) (3). Ester pyrolysis is a six-centre syn Ei (2). E1 goes through the 2-butyl cation and favours the more substituted alkenes (Zaitsev), so 2-butenes would dominate (4).

Practice Q6. Consider the sequence: 3-sulfolene → (LDA, then MeI) → A → (heat, with methyl acrylate present) → B. Which statements are correct?

  1. A is 2-methyl-3-sulfolene.
  2. On heating, A extrudes SO₂ by a disrotatory (linear cheletropic) process to give penta-1,3-diene.
  3. B is formed by a Diels–Alder reaction and is mainly the “ortho” adduct, methyl 2-methylcyclohex-3-ene-1-carboxylate.
  4. The SO₂ extrusion is a [4+4] cycloreversion.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a)

Deprotonation of the sulfolene α to the sulfonyl group and methylation gives 2-methyl-3-sulfolene (1). Linear cheletropic loss of SO₂ from a 6-electron system is suprafacial on the diene (disrotatory); the product is penta-1,3-diene (2). A 1-substituted diene with an acrylate gives the “ortho” adduct (3). The extrusion is cheletropic (both bonds to S), not a [4+4] (4 wrong).

Practice Q7. (Z)-But-2-ene and (E)-but-2-ene are each treated with dideuteriodiimide (DN=ND). Which statements are correct?

  1. (Z)-But-2-ene gives meso-2,3-dideuteriobutane.
  2. (E)-But-2-ene gives racemic (2R,3R)/(2S,3S)-2,3-dideuteriobutane.
  3. The two products are enantiomers of each other.
  4. Both reactions release N₂ as the by-product.

(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a)

Syn addition to a cis alkene of a symmetric substrate gives the meso compound (1); to the trans alkene, the racemate (2). Meso and the chiral pair are diastereomers, not enantiomers (3 wrong). The other product of every diimide transfer is N₂ (4).

Quick Revision Table

TopicKey facts
Eneene (allylic H) + enophile; \( [\sigma 2_s + \pi 2_s + \pi 2_s] \); C–C bond + H transfer + C=C shift
Variantscarbonyl-ene (Lewis acid) → homoallylic alcohol; Schenck (¹O₂) → allylic OOH; Conia-ene (enol, intramolecular); metallo-ene
Retro-eneβ-keto/malonic acid decarboxylation; homoallylic alcohol fragmentation; ester pyrolysis
Cheletropictwo bonds to one atom: SO₂, CO, singlet carbene
SO₂ rulediene + SO₂ (6 e): disrotatory; triene + SO₂ (8 e): conrotatory
Sulfolene stereocis-2,5-dimethyl → (E,E); trans → (E,Z)
CO extrusionnorbornadienones; tetraphenylcyclopentadienone + alkyne → arene + CO
Carbenessinglet: non-linear, stereospecific; triplet: stepwise
Diimidesyn H₂; spares C=O, NO₂, O–O; less substituted and strained alkenes faster
Eisyn; Se-oxide, S-oxide, N-oxide (5-ring); xanthate, ester (6-ring); statistical regiochemistry
Bergmanenediyne → p-benzyne diradical; DNA cleavage by enediyne antibiotics

Key Takeaways

What’s Next