Skip to content

Polymer Chemistry Formula Sheet and Short Notes

One-page CSIR NET revision: polymer molar mass averages, measurement methods, step-growth and chain-growth kinetics, living polymers and copolymers.

  • 7 min read
  • Updated
On this page · 6 sections
  1. Molar mass averages
  2. Measuring molar mass
  3. Step growth
  4. Chain growth
  5. Copolymerisation
  6. Last-minute checklist

Every formula, number and trap from Molar Mass Averages and Distributions, Determination of Molar Masses, Step-Growth Polymerisation Kinetics and Chain-Growth Polymerisation Kinetics, on one page.

Constants and unit masses used: \( R = 8.314 \) J K⁻¹ mol⁻¹; \( RT = 2479 \) J mol⁻¹ at 298.15 K; KOH 56.11 g mol⁻¹. Structural units (g mol⁻¹): ethylene 28.05, vinyl chloride 62.50, ethylene oxide 44.05, methyl methacrylate 100.12, styrene 104.15; nylon-6,6 repeat 226.32 (two structural units of mean mass 113.16).

Molar mass averages

$$\overline{M}_n = \frac{\sum N_iM_i}{\sum N_i} = \frac{1}{\sum w_i/M_i}, \qquad \overline{M}_w = \frac{\sum N_iM_i^2}{\sum N_iM_i} = \sum w_iM_i, \qquad \overline{M}_z = \frac{\sum N_iM_i^3}{\sum N_iM_i^2}$$$$\overline{M}_v = \Big(\sum w_iM_i^a\Big)^{1/a}, \qquad \overline{M}_n < \overline{M}_v < \overline{M}_w < \overline{M}_z \ \ (0 < a < 1)$$
  • Moments: \( \mu_k = \sum N_iM_i^k \); n, w, z = \( \mu_1/\mu_0 \), \( \mu_2/\mu_1 \), \( \mu_3/\mu_2 \).
  • Dispersity Đ = \( \overline{M}_w/\overline{M}_n \ge 1 \); Đ − 1 = \( \sigma_n^2/\overline{M}_n^2 \).
  • Equal masses of 10⁴ and 10⁵: \( \overline{M}_n = 18{,}200 \), \( \overline{M}_w = 55{,}000 \). Equal numbers: 55,000 and 91,800.
  • Blend: \( \overline{M}_n = \sum m_j/\sum(m_j/\overline{M}_{n,j}) \); \( \overline{M}_w = \sum m_j\overline{M}_{w,j}/\sum m_j \).
  • Most probable (step growth, radical disproportionation): \( n_x = (1 - p)p^{x-1} \), \( w_x = x(1 - p)^2p^{x-1} \); \( X_n = 1/(1 - p) \), \( X_w = (1 + p)/(1 - p) \), Đ = 1 + p. Monomer most abundant by number; weight maximum near \( X_n \).
  • Poisson (living): Đ = \( 1 + \nu/(1 + \nu)^2 \approx 1 + 1/X_n \).
  • Radical termination by combination: Đ = 1.5.

Measuring molar mass

MethodGivesKey relation
End groups\( \overline{M}_n \)one COOH per chain: \( \overline{M}_n = 56{,}110/\text{acid no.} \)
Membrane osmometry, VPO\( \overline{M}_n \)\( \Pi/c = RT(1/\overline{M}_n + A_2c + \cdots) \)
Light scattering\( \overline{M}_w \), \( R_g \) (z-average)\( Kc/R_\theta = (1/\overline{M}_w)(1 + q^2R_g^2/3) + 2A_2c \)
Viscometry\( \overline{M}_v \) (relative)\( \eta_{sp}/c = [\eta] + k_H[\eta]^2c \); \( [\eta] = KM^a \)
Sedimentation velocity\( M \) with \( D \)\( M = sRT/[D(1 - \bar{v}\rho)] \); 1 S = \( 10^{-13} \) s
Sedimentation equilibrium\( \overline{M}_w \), \( \overline{M}_z \)\( \mathrm{d}\ln c/\mathrm{d}r^2 = M(1 - \bar{v}\rho)\omega^2/2RT \)
SEC/GPCwhole distributionlarge elute first; universal: \( K_1M_1^{1+a_1} = K_2M_2^{1+a_2} \)
MALDI-TOF\( \overline{M}_n \), \( \overline{M}_w \) (narrow Đ)peak spacing = repeat unit
  • Units: \( \Pi \) in Pa, \( c \) in g L⁻¹ \( \Rightarrow RT/(\Pi/c)_0 \) in kg mol⁻¹. Intercept 24.8 Pa L g⁻¹ at 298 K \( \Rightarrow 1.0 \times 10^5 \) g mol⁻¹.
  • \( A_2 = (\bar{v}_2^2/V_1)(\tfrac{1}{2} - \chi) \): good solvent \( A_2 > 0 \); Θ: \( A_2 = 0 \), \( \chi = \tfrac{1}{2} \), \( a = \tfrac{1}{2} \); poor \( A_2 < 0 \).
  • Zimm: common intercept \( 1/\overline{M}_w \); \( \theta = 0 \) slope \( 2A_2 \); \( c = 0 \) slope/intercept \( = 16\pi^2n_0^2R_g^2/3\lambda_0^2 \).
  • Chains: freely jointed \( \langle r^2\rangle = nl^2 \); freely rotating (tetrahedral) \( 2nl^2 \); unperturbed \( C_\infty nl^2 \); ideal \( R_g^2 = \langle r^2\rangle/6 \).
  • Kraemer: \( \ln\eta_r/c = [\eta] + (k_H - \tfrac{1}{2})[\eta]^2c \), same intercept, negative slope.
  • Mark–Houwink \( a \): sphere 0; Θ coil 0.5; good-solvent coil 0.5–0.8; rod up to 2.
  • Hook numbers: 1 g L⁻¹ of \( M = 10^5 \) in water: \( \Delta T_f \approx 1.9 \times 10^{-5} \) K, \( \Pi \approx 25 \) Pa.

Step growth

IdeaFormula
Carothers\( X_n = 1/(1 - p) \): 0.99 → 100, 0.995 → 200
Self-catalysed polyesterificationthird order, \( X_n^2 = 1 + 2k[\mathrm{M}]_0^2t \)
Acid-catalysedsecond order, \( X_n = 1 + k'[\mathrm{M}]_0t \)
\( t_{0.99}/t_{0.98} \)2.02 (catalysed), 4.00 (self-catalysed)
Imbalance\( X_n = (1 + r)/(1 + r - 2rp) \); \( p = 1 \): \( (1 + r)/(1 - r) \)
Chain stopper\( r = N_A/(N_B + 2N_{B'}) \)
Closed equilibrium\( X_n = 1 + \sqrt{K} \)
Open equilibrium\( X_n = \sqrt{K[\mathrm{M}]_0/(p[\mathrm{H_2O}])} \)
Carothers gel point\( p_c = 2/f_{\text{avg}} \) (deficient groups when non-stoichiometric)
Flory–Stockmayer\( \alpha_c = 1/(f - 1) \); \( \alpha = p^2 \) for \( r = \rho = 1 \)
  • \( r = 0.98 \), \( p = 0.99 \): \( X_n = 50 \). \( r = 0.99 \), \( p = 1 \): 199.
  • Nylon-6,6 at 20,000 g mol⁻¹: \( X_n = 176.7 \), \( p = 0.9943 \).
  • Glycerol + phthalic anhydride (2 : 3): 0.833 (Carothers), 0.707 (statistical); experiment in between.
  • At \( p = 0.9 \): monomer conversion 99%, \( X_n \) only 10.

Chain growth

$$R_i = 2fk_d[\mathrm{I}], \qquad R_p = k_p[\mathrm{M}]\left(\frac{fk_d[\mathrm{I}]}{k_t}\right)^{1/2}, \qquad \nu = \frac{R_p}{R_i} = \frac{k_p[\mathrm{M}]}{2(fk_dk_t[\mathrm{I}])^{1/2}}$$
  • Termination rate written \( 2k_t[\mathrm{M^\bullet}]^2 \). \( X_n = 2\nu \) (combination) or \( \nu \) (disproportionation).
  • ×4 initiator: \( R_p \) ×2, \( \nu \) ×½. ×2 monomer and ×2 initiator: \( R_p \) ×2√2, \( X_n \) ×√2.
  • \( E_R = E_p + \tfrac{1}{2}E_d - \tfrac{1}{2}E_t \) (positive, large); \( E_{X_n} = E_p - \tfrac{1}{2}E_d - \tfrac{1}{2}E_t \) (negative). Photo-initiated: both \( E_p - \tfrac{1}{2}E_t \).
  • Dead end: \( \ln([\mathrm{M}]_0/[\mathrm{M}]) = 2k_p(f[\mathrm{I}]_0/k_dk_t)^{1/2}(1 - e^{-k_dt/2}) \).
  • Gel (Trommsdorff) effect: \( k_t \) diffusion-controlled, falls; \( R_p \), \( X_n \propto k_t^{-1/2} \) rise.
  • Mayo: \( 1/X_n = (1/X_n)_0 + C_M + C_S[\mathrm{S}]/[\mathrm{M}] + C_I[\mathrm{I}]/[\mathrm{M}] \); transfer lowers \( X_n \), not \( R_p \).
  • Inhibitor: induction period. Retarder: lower rate, no induction period. Degradative transfer: both \( R_p \) and \( X_n \) fall.
  • Ceiling: \( T_c = \Delta H_p/(\Delta S_p^\circ + R\ln[\mathrm{M}]) \); \( \ln[\mathrm{M}]_e = \Delta H_p/RT - \Delta S_p^\circ/R \). −70 kJ, −105 J K⁻¹: 667 K at 1 mol L⁻¹, 564 K at 0.1 mol L⁻¹.
  • Living anionic: \( R_p = k_p[\mathrm{M}][\mathrm{I}]_0 \); \( X_n = p[\mathrm{M}]_0/[\mathrm{I}]_0 \) (BuLi), \( 2p[\mathrm{M}]_0/[\mathrm{I}]_0 \) (Na naphthalenide); Đ ≈ 1 + 1/\( X_n \); block copolymers by sequential addition.
  • Cationic: \( R_p = (Kk_ik_p/k_t)[\mathrm{I}][\mathrm{ZY}][\mathrm{M}]^2 \); \( 1/X_n = k_t/k_p[\mathrm{M}] + C_M \); run cold.
  • Anionic monomers: electron-withdrawing groups; cationic: electron-donating groups; styrene goes all ways.

Copolymerisation

$$F_1 = \frac{r_1f_1^2 + f_1f_2}{r_1f_1^2 + 2f_1f_2 + r_2f_2^2}, \qquad r_1 = \frac{k_{11}}{k_{12}}, \quad r_2 = \frac{k_{22}}{k_{21}}$$
\( r_1r_2 \)Type
1ideal (random); \( F_1 = f_1 \) only if \( r_1 = r_2 = 1 \)
≈ 0alternating (\( F_1 = 0.5 \))
between, both \( r < 1 \)azeotrope at \( f_1 = (1 - r_2)/(2 - r_1 - r_2) \)
  • \( r_1 = 2 \), \( r_2 = 0.5 \), \( f_1 = 0.5 \): \( F_1 = 0.667 \). \( r_1 = 0.4 \), \( r_2 = 0.1 \): azeotrope 0.60.

Last-minute checklist

Back to the chapter overview. Related units: Chemical Kinetics: reaction mechanisms and chain reactions and Ideal and Non-Ideal Solutions.

Advertisement
Advertisement