Addition Reactions: Electrophilic, Radical, Nucleophilic and Conjugate
CSIR NET organic mechanisms: Markovnikov and anti-Markovnikov addition, bromonium ions, syn/anti stereochemistry, dienes, carbonyl and Michael addition.
- 15 min
On this page · 14 sections
- Prerequisites
- The Hook: The Missing Chloride
- Electrophilic Addition to Alkenes (AdE)
- Conjugated Dienes: 1,2 versus 1,4 Addition
- Radical Addition
- Nucleophilic Addition to the Carbonyl Group
- Conjugate (1,4) Addition: Michael-Type Reactions
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Electrophiles, Nucleophiles and Radicals: carbocation and radical stability; hard and soft reagents.
- Elimination Reactions: addition is the reverse of elimination, and the same geometric ideas (syn, anti) apply.
- Meso compounds, enantiomers and racemates: see Stereogenicity, Chirality and Configuration.
- Kinetic versus thermodynamic control in competing reactions: see Complex Reactions and the Steady-State Approximation.
The Hook: The Missing Chloride
Electrophilic Addition to Alkenes (AdE)
General two-step scheme:
$$\mathrm{C{=}C + E^+ \xrightarrow{\text{slow}} {}^+C{-}C{-}E\ \ (\text{or bridged ion}) \xrightarrow{Nu^-,\ \text{fast}} Nu{-}C{-}C{-}E}$$The alkene is the nucleophile (π HOMO); the reagent supplies the electrophile. Electron-donating groups on the alkene speed up the reaction; electron-withdrawing groups slow it.
Markovnikov’s rule, stated mechanistically
The electrophile adds to the alkene carbon that gives the more stable carbocation (or the more stable partial positive charge in a bridged ion). For HX, this places H on the less substituted carbon and X on the more substituted one.
- Propene + HBr (dark, no peroxide) → 2-bromopropane.
- Electron-withdrawing groups reverse the outcome: CH₂=CH–CF₃ + HX puts X on the terminal carbon, because a cation next to CF₃ is destabilised.
- Rearrangements follow from free cations: 3,3-dimethylbut-1-ene + HCl gives 2-chloro-2,3-dimethylbutane (after a methyl shift) along with the unrearranged 3-chloro-2,2-dimethylbutane.
Addition of halogens: the bromonium ion
$$\mathrm{C{=}C + Br_2 \longrightarrow \text{bromonium ion} + Br^- \longrightarrow \textit{anti}\text{-1,2-dibromide}}$$- Br₂ approaches the π bond; the polarised Br–Br bond breaks and a three-membered bromonium ion forms.
- Br⁻ opens it from the back side, like an SN2 reaction: anti addition.
- Stereospecific: (Z)-but-2-ene gives racemic (2R,3R)/(2S,3S)-2,3-dibromobutane; (E)-but-2-ene gives meso-2,3-dibromobutane.
- Cyclohexene gives trans-1,2-dibromocyclohexane (initially diaxial).
- Evidence: anti stereospecificity; incorporation of external nucleophiles (the hook); bromonium ions have been characterised in superacid media and as a stable salt of a very hindered alkene (adamantylideneadamantane).
| Alkene / halogen | Intermediate | Stereochemistry |
|---|---|---|
| Alkyl-substituted alkene + Br₂ or Cl₂ | bridged halonium | anti, stereospecific |
| Styrenes (aryl-conjugated) + Br₂ | partly open benzylic cation | anti selectivity drops; some syn |
| Alkene + Cl₂ | chloronium less bridged than bromonium | anti, but more open-cation character than Br |
| Alkene + F₂ | uncontrolled, radical | not used |
Halohydrins and other “mixed” additions
With Br₂ in water (or NBS in aqueous DMSO), water outcompetes bromide as the nucleophile:
- Regiochemistry: water attacks the more substituted carbon of the bromonium ion, because that C–Br bond is longer and carries more positive charge (the opening has SN1 character). Propene gives 1-bromopropan-2-ol.
- Stereochemistry: anti (Br and OH trans in rings).
Hydration and related additions
| Method | Regiochemistry | Stereochemistry | Rearrangement? | Intermediate |
|---|---|---|---|---|
| H₃O⁺ (acid-catalysed hydration) | Markovnikov | not controlled | yes | carbocation |
| Hg(OAc)₂/H₂O, then NaBH₄ (oxymercuration–demercuration) | Markovnikov | anti addition of Hg and OH (the reduction step scrambles C–Hg stereochemistry) | no | mercurinium ion (bridged) |
| BH₃·THF (or 9-BBN), then H₂O₂/NaOH (hydroboration–oxidation) | anti-Markovnikov (OH on less substituted C) | syn addition of H and OH | no | four-centre concerted TS; oxidation with retention at C |
| HBr + peroxide | anti-Markovnikov (Br on less substituted C) | not controlled | no | carbon radical |
Hydroboration in detail. B adds to the less substituted carbon for two reasons: steric (the boron end carries the bulky groups) and electronic (in the four-centre transition state, partial positive charge builds on the more substituted carbon while hydride transfers to it). Bulky boranes (9-BBN, disiamylborane) raise regioselectivity further. Oxidation (HOO⁻) replaces C–B by C–OH through a 1,2-alkyl shift from B to O with retention. 1-Methylcyclohexene gives trans-2-methylcyclohexan-1-ol.
Syn and anti dihydroxylation and epoxidation
| Reagent | Addition | From (Z)-but-2-ene | From (E)-but-2-ene |
|---|---|---|---|
| OsO₄ (then reductive work-up) or cold, dilute, alkaline KMnO₄ | syn diol (cyclic osmate/manganate ester) | meso-butane-2,3-diol | racemic butane-2,3-diol |
| RCO₃H (peracid, e.g. mCPBA) | syn, concerted (“butterfly” TS) epoxide | cis-2,3-dimethyloxirane (meso) | trans-2,3-dimethyloxirane (racemic) |
| RCO₃H, then H₃O⁺ (epoxide opening) | anti diol | racemic diol | meso diol |
| Br₂ | anti dibromide | racemic | meso |
Peracid epoxidation is electrophilic: more substituted (electron-rich) alkenes react faster, and in a polyene the most substituted C=C is epoxidised selectively. Singlet carbenes also add to alkenes stereospecifically (cis alkene → cis cyclopropane); carbenes are covered in the reactive-intermediates unit.
Alkynes, briefly
- HX adds in a Markovnikov sense; two equivalents give the geminal dihalide.
- Hg²⁺/H₂SO₄ hydration gives the enol, which tautomerises: terminal alkynes give methyl ketones.
- Hydroboration of a terminal alkyne with a bulky borane, then oxidation, gives the aldehyde (anti-Markovnikov enol → aldehyde).
- Alkynes undergo electrophilic addition more slowly than comparable alkenes (the vinyl cation is less stable), but nucleophilic additions faster.
Conjugated Dienes: 1,2 versus 1,4 Addition
H⁺ adds to C1 of buta-1,3-diene to give an allylic cation with positive charge shared between C2 and C4. Bromide can capture either end.
| Product | Formed by | Control |
|---|---|---|
| 3-Bromobut-1-ene (1,2-adduct) | attack at C2, the carbon nearer the ion pair and carrying more charge | kinetic: favoured at low temperature |
| 1-Bromobut-2-ene (1,4-adduct) | attack at C4 | thermodynamic: more substituted, more stable internal alkene; favoured at higher temperature or longer times, when the adducts can re-ionise and equilibrate |
Warming the low-temperature product mixture converts it to the high-temperature (1,4-rich) composition, which proves that the 1,2-adduct is the kinetic product and that equilibration goes through the common allylic cation.
graph LR
D["Buta-1,3-diene
+ HBr"] --> C["Allylic cation
(C2 and C4 share +)"]
C -- "lower barrier,
low T" --> K["1,2-adduct
kinetic product"]
C -- "more stable product,
higher T, reversible" --> T["1,4-adduct
thermodynamic product"]
K -. "re-ionises when warm" .-> CRadical Addition
HBr with peroxides (Kharasch)
- Initiation: RO–OR → 2RO•; RO• + HBr → ROH + Br•
- Propagation: Br• + CH₂=CHR → BrCH₂–ĊHR (the more stable radical); BrCH₂–ĊHR + HBr → BrCH₂CH₂R + Br•
- Termination: radical combinations
Both propagation steps must be exothermic or nearly so; this is true only for HBr (see Electrophiles, Nucleophiles and Radicals). Stereochemistry at the new centres is not controlled, because the carbon radical is nearly planar and its configuration is lost.
Other radical additions follow the same chain pattern: thiols to alkenes (anti-Markovnikov thioethers), CCl₄ or BrCCl₃ to alkenes (atom-transfer addition), and the propagation step of radical polymerisation (see Chain-Growth Polymerization Kinetics).
Nucleophilic Addition to the Carbonyl Group
Mechanism under basic and acidic conditions
- Basic or neutral (strong Nu⁻): Nu⁻ attacks the carbonyl carbon (π*), giving a tetrahedral alkoxide, which is protonated.
- Acidic (weak Nu such as H₂O, ROH): the carbonyl oxygen is protonated first, making the carbon far more electrophilic; then the weak nucleophile adds.
The nucleophile approaches at about 105–107° to the C=O bond (the Bürgi–Dunitz trajectory), in the plane perpendicular to the carbonyl plane, to overlap with π* while avoiding the oxygen’s electron density.
Reactivity
Aldehydes > ketones, and electron-poor carbonyls > electron-rich, because:
- alkyl groups donate electron density to the carbonyl carbon and stabilise C=O;
- alkyl groups crowd the tetrahedral product (sp² 120° → sp³ 109.5°) more than H does;
- conjugation with C=C or aryl stabilises the carbonyl and lowers reactivity.
Hydrate equilibria illustrate this. Formaldehyde is almost entirely hydrated in water; acetaldehyde is roughly half hydrated; acetone is hydrated only to a tiny extent; chloral (Cl₃CCHO), with a strongly electron-withdrawing CCl₃ group, forms a stable, isolable hydrate. Strained ketones (cyclopropanone) also hydrate extensively because sp³ relieves angle strain.
Representative additions
| Nucleophile | Product | Mechanistic point |
|---|---|---|
| CN⁻ (HCN with catalytic base) | cyanohydrin | rate depends on [CN⁻], not on [HCN]: the anion is the nucleophile; reversible |
| H₂O, ROH (acid or base catalysed) | hydrate, hemiacetal; acetal with excess ROH and acid | acetal formation goes through an oxocarbenium ion; acetals are stable to base |
| RNH₂ | imine (after loss of water) | rate maximum at mildly acidic pH: too acidic protonates the amine; too basic fails to assist loss of water from the carbinolamine |
| R₂NH | enamine | |
| H⁻ (NaBH₄, LiAlH₄), RMgX, RLi | alcohols | irreversible; strongly basic nucleophiles |
| Ylides (Ph₃P=CHR) | alkene (Wittig) | addition followed by elimination through an oxaphosphetane |
Facial selectivity
- Cyclohexanones: small hydride donors (LiAlH₄, NaBH₄) attack mainly from the axial direction, giving the equatorial alcohol; bulky hydrides (e.g. L-Selectride) attack from the less hindered equatorial face, giving the axial alcohol. 4-tert-Butylcyclohexanone is the standard test substrate.
- Acyclic ketones with an adjacent stereocentre: the Felkin–Anh model predicts the major diastereomer (largest group perpendicular to C=O, nucleophile along the Bürgi–Dunitz path past the smallest group). Chelation control can reverse it. These models belong to asymmetric induction in the stereochemistry unit.
Conjugate (1,4) Addition: Michael-Type Reactions
An α,β-unsaturated carbonyl compound has two electrophilic sites: the carbonyl carbon (C2 counting from O as 1: “1,2-addition”) and the β-carbon (“1,4-addition” or conjugate addition), where the π* coefficient is large.
$$\mathrm{Nu^- + C_\beta{=}C_\alpha{-}C{=}O \longrightarrow Nu{-}C_\beta{-}C_\alpha{=}C{-}O^- \xrightarrow{H^+} Nu{-}C_\beta{-}C_\alpha H{-}C{=}O}$$| Reagent | Main mode with enones | Reason |
|---|---|---|
| RLi, RMgX (most), LiAlH₄ | 1,2 | hard, charge-controlled, fast and irreversible attack at the most positive carbon |
| R₂CuLi (Gilman cuprates), RMgX + catalytic Cu(I) | 1,4 | soft, orbital-controlled |
| Stabilised enolates (malonate, acetoacetate), nitroalkane anions | 1,4 (Michael addition) | soft; and 1,2-addition is reversible while 1,4 gives the more stable product |
| RS⁻, R₂NH, CN⁻ (thermodynamic conditions) | 1,4 | soft and/or reversible 1,2-addition |
| NaBH₄ with CeCl₃ (Luche) | 1,2 | the hardened hydride and Lewis acid activation favour the carbonyl |
Nucleophilic addition to C=C in general requires an electron-withdrawing group (C=O, CN, NO₂, SO₂R) conjugated to the alkene; plain alkenes do not react with nucleophiles (the hook of Electrophiles, Nucleophiles and Radicals).
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Anti-Markovnikov by radicals (HBr/peroxide) | Anti-Markovnikov by hydroboration (concerted, syn) | |
| Oxymercuration: Markovnikov, no rearrangement | Acid hydration: Markovnikov, rearrangement possible | |
| OsO₄: syn diol | Epoxidation then H₃O⁺: anti diol | |
| 1,2-addition (to C=O) | 1,4-addition (to the β-carbon) | |
| Kinetic product (faster formed, lower barrier) | Thermodynamic product (more stable, needs reversibility) | |
| Bromonium ion: bridged, anti opening | Open benzylic cation: loss of stereospecificity | |
| Electrophilic addition to alkenes | Nucleophilic addition to carbonyls and activated alkenes |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is the product of propene with BH₃·THF followed by H₂O₂/NaOH?
- Is the addition of Br₂ to cyclohexene syn or anti?
- Which adds 1,4 to cyclohex-2-en-1-one: CH₃Li or (CH₃)₂CuLi?
Answers
- Propan-1-ol (anti-Markovnikov, syn addition of H and OH).
- Anti, giving trans-1,2-dibromocyclohexane.
- (CH₃)₂CuLi, giving 3-methylcyclohexanone after work-up. CH₃Li adds 1,2 to give the tertiary allylic alcohol.
Level 2: Part B Style
Practice Q1. (Z)-But-2-ene is treated with OsO₄ followed by aqueous NaHSO₃. The product is:
(a) meso-butane-2,3-diol (b) racemic butane-2,3-diol (c) (2R,3R)-butane-2,3-diol only (d) butan-2-one
Answer: (a)
OsO₄ adds syn through a cyclic osmate ester. Syn addition to a cis alkene with identical ends gives the meso diol. (E)-But-2-ene would give the racemate.
Practice Q2. 2-Methylbut-2-ene reacts with Br₂ in water. The major product is:
(a) 3-bromo-2-methylbutan-2-ol (b) 2-bromo-3-methylbutan-2-ol (c) 2,3-dibromo-2-methylbutane only (d) 3-methylbutan-2-one
Answer: (a)
The bromonium ion opens at the more substituted (tertiary) carbon, which carries more positive charge. Water adds there, giving OH on C2 and Br on C3: 3-bromo-2-methylbutan-2-ol.
Practice Q3. Which reagent sequence converts 1-methylcyclohexene into trans-2-methylcyclohexan-1-ol?
(a) H₃O⁺, heat (b) Hg(OAc)₂/H₂O, then NaBH₄ (c) BH₃·THF, then H₂O₂/NaOH (d) mCPBA, then LiAlH₄
Answer: (c)
Hydroboration puts B on C2 (less substituted) and H on C1, syn; oxidation replaces B by OH with retention. H and OH are cis, so the methyl (on C1) and OH (on C2) are trans. (a) and (b) give 1-methylcyclohexan-1-ol. (d) opens the epoxide at the less hindered carbon C2 to give 1-methylcyclohexan-1-ol as the main product.
Practice Q4. A ketone forms a cyanohydrin with equilibrium constant \( K = 30\ \text{L mol}^{-1} \) (illustrative). It is treated with HCN at a constant 1.0 mol L⁻¹ (large excess) with catalytic base. The fraction of ketone converted at equilibrium is closest to:
(a) 0.50 (b) 0.75 (c) 0.97 (d) 1.00
Answer: (c)
\( [\text{cyanohydrin}]/[\text{ketone}] = K[\mathrm{HCN}] = 30 \). Fraction converted \( = 30/31 = 0.968 \). The reaction is reversible, so conversion is high but not complete.
Level 3: Part C Style
Practice Q5. Buta-1,3-diene reacts with HBr. At low temperature the product is rich in the 1,2-adduct; at higher temperature it is rich in the 1,4-adduct; warming the low-temperature mixture changes it to the high-temperature composition. Which statements are correct?
- Both adducts come from a common allylic cation.
- The 1,2-adduct is the kinetic product and the 1,4-adduct is the thermodynamic product.
- If the difference in activation free energies is 3.0 kJ mol⁻¹ favouring the 1,2-adduct, the kinetic 1,2 : 1,4 ratio at 200 K is about 6.1.
- The 1,4-adduct is more stable because it has a more substituted double bond.
(a) 1, 2 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (d) 1, 2, 3 and 4
- Protonation at C1 gives one delocalised allylic cation, captured at C2 or C4. Correct.
- The low-temperature, irreversible product is kinetic; the equilibrated product is thermodynamic. Correct.
- Under kinetic control the ratio is \( \exp(\Delta\Delta G^\ddagger/RT) = \exp(3000/(8.314\times200)) = e^{1.80} = 6.1 \). Correct.
- 1-Bromobut-2-ene has a disubstituted internal C=C; 3-bromobut-1-ene has a monosubstituted terminal C=C. Correct.
Every statement is true here; do not assume that a numerical statement must be the distractor.
Practice Q6. Ethene is passed into Br₂ dissolved in methanol containing LiCl. The products are 1,2-dibromoethane, 1-bromo-2-chloroethane and 1-bromo-2-methoxyethane. Which statements are correct?
- Bromine adds in two steps through a cationic (bromonium) intermediate.
- The formation of 1-bromo-2-chloroethane shows that chloride captures the intermediate formed after Br⁺ transfer.
- 1,2-Dichloroethane would be expected as a significant product.
- Methanol acts as a nucleophile in the second step.
(a) 1, 2 and 4 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 4 only
- Incorporation of external nucleophiles requires an intermediate. Correct.
- Chloride cannot react with ethene directly; it opens the bromonium ion. Correct.
- The electrophile is bromine; every product contains at least one Br. Chloride cannot supply the electrophilic step. Wrong.
- Solvent methanol opens the bromonium ion to give the bromo ether (after loss of H⁺). Correct.
Practice Q7. Cyclohex-2-en-1-one is treated separately with (I) CH₃MgBr in ether, (II) (CH₃)₂CuLi, (III) diethyl malonate with catalytic NaOEt, and (IV) NaBH₄ with CeCl₃ in methanol. Which statements are correct?
- (I) and (IV) give mainly 1,2-addition products.
- (II) and (III) give mainly 1,4-addition products.
- In (III), the 1,4-adduct dominates partly because 1,2-addition of the stabilised enolate is reversible.
- The β-carbon is attacked by soft nucleophiles because the LUMO (π*) has a large coefficient there.
(a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4 only
Answer: (a) 1, 2, 3 and 4
- Grignard (hard, irreversible) and Luche reduction (hardened hydride) attack C=O. Correct.
- Cuprate and malonate (soft) give conjugate addition: 3-methylcyclohexanone and the Michael adduct. Correct.
- Malonate 1,2-addition gives a weak C–C bond that reverts; the 1,4-adduct (a stable ketone) accumulates. Correct.
- Orbital (soft) control follows the LUMO coefficients, largest at the β-carbon among the carbon sites. Correct.
Quick Revision Table
| Idea | Fact |
|---|---|
| AdE | E⁺ first → cation or bridged ion → Nu⁻ |
| Markovnikov | E⁺ goes to give the more stable cation; X on more substituted C |
| HX rearrangement | 3,3-dimethylbut-1-ene + HCl → rearranged tertiary chloride |
| Br₂ | bromonium; anti; Z → racemic, E → meso |
| Halohydrin | OH on more substituted C, anti |
| Oxymercuration | Markovnikov, no rearrangement |
| Hydroboration | anti-Markovnikov, syn, no rearrangement, oxidation with retention |
| HBr + peroxide | anti-Markovnikov, radical chain; only HBr |
| OsO₄ / KMnO₄ (cold) | syn diol |
| Peracid | syn epoxide; then H₃O⁺ → anti diol |
| Meso rule | syn + cis, anti + trans → meso |
| Dienes | 1,2 kinetic (low T); 1,4 thermodynamic (high T) |
| Carbonyl reactivity | HCHO > RCHO > R₂CO; EWG increases; chloral hydrate stable |
| Imine formation | fastest at mildly acidic pH |
| Cyclohexanone + small H⁻ | axial attack → equatorial OH |
| Conjugate addition | cuprates, enolates (Michael), thiols, amines: 1,4; RLi, RMgX, LiAlH₄: 1,2 |
Key Takeaways
What’s Next
- Determination of Reaction Pathways: how stereochemistry, trapping and kinetics prove these mechanisms.
- The reverse reactions: Elimination Reactions.
- Metal-mediated additions (hydrogenation, hydroformylation) are covered in Homogeneous Catalysis.
- Organic Reaction Mechanisms: Quick Revision.