Skip to content

Aromatic Substitution: SEAr, SNAr, Benzyne and SRN1

CSIR NET organic mechanisms: arenium-ion SEAr, directing effects, partial rate factors, ipso attack, SNAr Meisenheimer complexes, benzyne and SRN1 pathways.

  • 19 min read
  • Updated
On this page · 12 sections
  1. Prerequisites
  2. The Hook: Why Benzene Substitutes Instead of Adding
  3. Electrophilic Aromatic Substitution (SEAr)
  4. Nucleophilic Aromatic Substitution
  5. Comparing the Four Aromatic Pathways
  6. Memory Tricks
  7. Don’t Confuse
  8. Common Mistakes
  9. Practice
  10. Quick Revision Table
  11. Key Takeaways
  12. What’s Next

Prerequisites

The Hook: Why Benzene Substitutes Instead of Adding

Electrophilic Aromatic Substitution (SEAr)

The arenium-ion mechanism

$$\mathrm{ArH + E^+ \xrightarrow{\text{slow}} [ArHE]^+ \xrightarrow{\text{fast},\ -H^+} ArE}$$
  1. Generation of the electrophile (usually with an acid or Lewis acid).
  2. Attack by the π system on E⁺ to give the arenium ion (σ-complex, Wheland intermediate): a cyclohexadienyl cation with the positive charge delocalised over the carbons ortho and para to the sp³ carbon. A loose π-complex may precede it.
  3. Loss of H⁺ from the sp³ carbon restores aromaticity.

Step 2 is usually rate-determining. The evidence: no primary kinetic isotope effect in most nitrations and many halogenations (C₆H₆ and C₆D₆ react at nearly the same rate), so C–H cleavage is not part of the slow step. Sulfonation (and some iodinations, and reactions at very hindered positions) shows a primary KIE because the arenium ion can revert to reactants nearly as fast as it loses H⁺, so deprotonation becomes partly rate-limiting. Stable arenium salts have been isolated with very weakly nucleophilic counter-ions at low temperature.

Electrophiles and conditions

ReactionReagentsElectrophileNotes
Nitrationconc. HNO₃ + conc. H₂SO₄NO₂⁺ (nitronium)H₂SO₄ protonates HNO₃, which loses water
HalogenationBr₂/FeBr₃, Cl₂/AlCl₃ or FeCl₃polarised X–X···MX₃activated rings (phenol, aniline) need no catalyst and polyhalogenate
Sulfonationfuming H₂SO₄ (SO₃)SO₃ (or HSO₃⁺)reversible: hot dilute acid removes SO₃H (useful as a blocking group)
Friedel–Crafts alkylationRX/AlCl₃, alkene/H⁺, ROH/H⁺carbocation or R–X···AlCl₃ complexrearrangements; polyalkylation (product more reactive); reversible
Friedel–Crafts acylationRCOCl or (RCO)₂O, AlCl₃ (≥ 1 equiv)acylium RC≡O⁺no rearrangement; stops at monoacylation (product deactivated); AlCl₃ bound by the ketone product
Diazo couplingArN₂⁺aryldiazonium (weak)needs strongly activated partner: phenoxide (mildly alkaline) or arylamine (mildly acidic)
NitrosationHNO₂/H⁺NO⁺only very activated rings (phenols, tertiary arylamines)

Substituent effects: rate and orientation

A substituent already on the ring affects (i) how fast the ring reacts relative to benzene (activation or deactivation) and (ii) where the electrophile goes (ortho/para or meta). Both follow from how the substituent stabilises the arenium ion.

ClassSubstituentsEffectOrientation
Strongly activating–O⁻, –NH₂, –NHR, –NR₂, –OHstrong +M (lone pair)ortho, para
Moderately activating–OR, –NHCOR, –OCOR+M reduced by competing conjugationortho, para
Weakly activatingalkyl, aryl+I and hyperconjugationortho, para
Weakly deactivating–F, –Cl, –Br, –I−I outweighs +Mortho, para
Moderately deactivating–CHO, –COR, –CO₂R, –CO₂H, –CONH₂−M, −Imeta
Strongly deactivating–NO₂, –CN, –SO₃H, –CF₃, –NR₃⁺strong −M and/or −Imeta

Ortho : para ratio. Statistically there are two ortho positions and one para. Steric bulk on either the substituent or the electrophile pushes the ratio toward para: tert-butylbenzene nitrates mostly para, toluene gives a large ortho fraction.

Anilines in strong acid. In concentrated HNO₃/H₂SO₄, aniline is largely protonated to the anilinium ion (–NH₃⁺, meta-directing and deactivating), so substantial meta-nitroaniline forms along with oxidation products. Acetylation first (–NHCOCH₃) gives a moderately activating, para-selective group, after which hydrolysis returns the amine.

Partial rate factors

The partial rate factor \( f_x \) compares the rate at one position x of a substituted benzene with the rate at one position of benzene:

$$f_x = \frac{k_{\text{ArH}}}{k_{\text{PhH}}}\times\frac{6}{n_x}\times(\text{fraction of product at } x)$$

where \( n_x \) is the number of x positions in ArH (2 for ortho, 2 for meta, 1 for para) and 6 is the number of positions in benzene. \( f > 1 \) means that position is activated relative to a benzene position.

Partial rate factors for the para position correlate with the substituent constant \( \sigma_p^+ \) (Brown’s electrophilic substituent constants), not with ordinary \( \sigma_p \), because a positive charge develops in conjugation with the substituent. This is used on Determination of Reaction Pathways.

More than one substituent

  1. When directing effects reinforce each other, the product is predictable.
  2. When they conflict, the more strongly activating group controls orientation (–OH, –NR₂ beat alkyl, which beats halogen and all meta directors).
  3. A position flanked by two substituents (between two groups meta to each other) is attacked little, for steric reasons.

Ipso substitution

Attack at a ring carbon that already carries a substituent other than H is ipso attack. If that substituent is a better electrofuge than H⁺ (it leaves more easily as a cation), ipso substitution results.

Group lostExample
–SO₃Hdesulfonation in hot dilute acid (reverse of sulfonation)
–SiR₃protodesilylation and halodesilylation: E⁺ replaces silicon (β-silicon effect stabilises the arenium ion)
–C(CH₃)₃de-tert-butylation (loses the stable tert-butyl cation)
–CO₂Hdecarboxylation of activated (e.g. hydroxy) benzoic acids

Kinetic versus thermodynamic control: naphthalene

Naphthalene reacts faster at C1 (α) because the arenium ion keeps one intact benzene ring in more resonance forms. Sulfonation at low temperature gives naphthalene-1-sulfonic acid (kinetic product). At higher temperature, where sulfonation is reversible, the 2-sulfonic acid accumulates (thermodynamic product), because the 1-isomer suffers a steric clash between the SO₃H group and the peri hydrogen at C8. Nitration, which is effectively irreversible, gives 1-nitronaphthalene.

Nucleophilic Aromatic Substitution

Simple aryl halides do not undergo SN1 (aryl cations are very unstable; the empty orbital is sp² and in the ring plane) or SN2 (backside blocked by the ring). Nucleophiles substitute arenes by three other routes.

graph TD
    A["Aryl halide + nucleophile"] --> B{"Strong -M groups
(NO2, CN, C=O)
ortho/para to X?"} B -- yes --> C["SNAr: addition-elimination
Meisenheimer complex
F > Cl > Br > I"] B -- no --> D{"Very strong base
(NaNH2, LDA, KNH2)
and an ortho H?"} D -- yes --> E["Elimination-addition
via benzyne:
cine substitution"] D -- no --> F{"Light or electron donor,
suppressed by
radical scavengers?"} F -- yes --> G["SRN1:
radical-anion chain"] F -- no --> H["Use a metal catalyst
(Cu, Pd) or a
diazonium salt instead"]

SNAr: addition–elimination

$$\mathrm{ArX + Nu^- \xrightarrow{\text{slow}} [Ar(X)(Nu)]^- \xrightarrow{\text{fast}} ArNu + X^-}$$
  • The nucleophile adds to the ipso carbon, giving a resonance-stabilised cyclohexadienyl anion, the Meisenheimer complex. Stable, coloured Meisenheimer salts have been isolated from polynitroaryl ethers and alkoxides.
  • Activation: strongly electron-withdrawing groups ortho or para to the leaving group delocalise the negative charge onto themselves (onto the oxygens of NO₂). A meta-NO₂ helps only inductively. Each extra o/p NO₂ increases the rate dramatically: 2,4-dinitro and 2,4,6-trinitro substrates react under mild conditions.
  • Kinetics: second order, \( v = k[\mathrm{ArX}][\mathrm{Nu}] \).
  • Leaving-group order (element effect): F ≫ Cl ≈ Br > I. Addition is rate-determining; the very electronegative F makes the ipso carbon more electrophilic and stabilises the anionic transition state, while C–F cleavage comes later in a fast step. The reverse of the SN2 order is itself evidence that C–X is not broken in the rate-determining step.
  • Example: Sanger’s reagent, 1-fluoro-2,4-dinitrobenzene, reacts with the free N-terminal amino group of a peptide by SNAr, which is how the N-terminal residue was labelled for identification.
  • Pyridines and other aza-arenes undergo SNAr at C2 and C4 without extra activation: ring nitrogen plays the role of the nitro group.

Elimination–addition: benzyne

Chlorobenzene with NaNH₂ (or KNH₂) in liquid ammonia gives aniline through benzyne (1,2-didehydrobenzene):

  1. NH₂⁻ removes the proton ortho to Cl (the most acidic ring proton, by the −I effect of Cl).
  2. The aryl anion loses Cl⁻ to give benzyne, which has a strained, weak “triple” bond formed by side-on overlap of two in-plane sp² orbitals; the aromatic π sextet is untouched.
  3. NH₂⁻ adds to either end of the benzyne; the new aryl anion takes a proton from NH₃.

Evidence:

ObservationWhat it shows
Chlorobenzene-1-¹⁴C gives aniline with the label about half at C1 (ipso product) and half at C2 (cine product: NH₂ on the carbon next to where Cl was)a symmetrical intermediate in which C1 and C2 have become equivalent
Aryl halides with no ortho hydrogen (both ortho positions substituted) do not react under these conditionsthe ortho C–H must be broken
Benzyne generated in the presence of furan or anthracene is trapped as a Diels–Alder adducta reactive dienophile is formed
Ortho-deuterated halobenzenes react more slowly than the protio compounds or exchange D with the solvent, depending on the halogenortho deprotonation occurs (and can be reversible)

Regiochemistry with substituted arynes. The incoming nucleophile adds so that the resulting aryl anion is better stabilised, usually placing the carbanion next to an inductively withdrawing group.

  • 2-Bromoanisole + NaNH₂/NH₃ gives 3-methoxyaniline (m-anisidine): NH₂⁻ adds at C3 so that the anion at C2 sits next to the −I OCH₃ group.
  • 4-Chlorotoluene gives a mixture of 4- and 3-methylaniline (p- and m-toluidine), because the methyl group barely distinguishes the two aryne carbons.

More on the structure and generation of arynes (from anthranilic acid diazonium salts, from 2-(trimethylsilyl)aryl triflates with fluoride) belongs to the reactive-intermediates unit.

SN1 at aryl carbon: diazonium salts

Aryldiazonium ions lose N₂, the best leaving group known, on warming. In water they give phenols; the tetrafluoroborate salts on heating give aryl fluorides (Balz–Schiemann). Whether a free aryl cation forms in every case is debated, but the reactions show first-order kinetics in ArN₂⁺ and are insensitive to the nucleophile, as expected for an SN1-like pathway. Copper(I)-mediated replacements (Sandmeyer: ArCl, ArBr, ArCN) go by single-electron transfer and aryl radicals instead.

SRN1: radical-nucleophilic substitution

Unactivated aryl halides with no nitro group react with enolates, amide ions or thiolates in liquid ammonia or DMSO when irradiated (or given a solvated-electron donor), by a radical chain:

  1. Initiation: ArX + e⁻ → [ArX]•⁻
  2. [ArX]•⁻ → Ar• + X⁻
  3. Ar• + Nu⁻ → [ArNu]•⁻
  4. [ArNu]•⁻ + ArX → ArNu + [ArX]•⁻ (chain carrier regenerated)

Diagnostics: light or alkali-metal stimulation, inhibition by radical scavengers (TEMPO, di-tert-butylnitroxide) or electron acceptors (p-dinitrobenzene), and no cine substitution (the nucleophile appears exactly where X was). These criteria separate SRN1 from benzyne routes on the same substrates.

Comparing the Four Aromatic Pathways

FeatureSEArSNArBenzyneSRN1
Ring rolenucleophileelectrophileelectrophile (aryne)radical acceptor
Intermediatearenium cationMeisenheimer anionarynearyl radical, radical anions
Activating groupselectron donorso/p electron acceptorsnone needednone needed
Leaving groupH⁺ (or ipso electrofuge)F > Cl ≈ Br > ICl, Br, I; F reluctant (F⁻ loss from the aryl anion is slow)I usually best
Substitution positionset by directing groupsipso onlyipso + cineipso only
Typical KIEnone (most)not used as a testortho H/D effectsnot used as a test

Memory Tricks

Don’t Confuse

ThisvsThat
Arenium (Wheland) ion: cation, SEArMeisenheimer complex: anion, SNAr
Halogen: deactivating but o/p-directingNitro: deactivating and meta-directing
Ipso substitution: same carbon, group other than H leavesCine substitution: neighbouring carbon (benzyne)
Kinetic product (naphthalene-1-sulfonic acid)Thermodynamic product (naphthalene-2-sulfonic acid)
Friedel–Crafts alkylation: rearranges, polyalkylatesFriedel–Crafts acylation: no rearrangement, monoacylates
SNAr leaving group F > Cl ≈ Br > ISN2 leaving group I > Br > Cl ≫ F
SRN1: radical chain, no activating group, lightSNAr: polar, needs o/p electron-withdrawing groups

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Name the electrophile in the nitration of benzene with mixed acid.
  2. Is –NHCOCH₃ activating or deactivating, and which positions does it direct to?
  3. What is the intermediate in the reaction of 1-chloro-2,4-dinitrobenzene with methoxide?
Answers
  1. The nitronium ion, NO₂⁺.
  2. Moderately activating (the N lone pair is partly drawn into the acetyl C=O), ortho/para directing, mainly para for steric reasons.
  3. A Meisenheimer complex (anionic σ-complex) with the negative charge delocalised onto the ortho and para nitro groups.

Level 2: Part B Style

Practice Q1. The major product of mononitration of methyl benzoate is:

(a) methyl 2-nitrobenzoate (b) methyl 3-nitrobenzoate (c) methyl 4-nitrobenzoate (d) a 2:1 mixture of 2- and 4-isomers

Answer: (b)

The ester group (–CO₂CH₃) is a −M, −I deactivating meta director: ortho and para attack would place positive charge on the carbon bearing the carbonyl group.

Practice Q2. For SNAr reaction of 1-X-2,4-dinitrobenzenes with piperidine, the order of reactivity is:

(a) X = I > Br > Cl > F (b) X = F > Cl ≈ Br > I (c) X = Cl > F > Br > I (d) all four react at the same rate

Answer: (b)

Addition to form the Meisenheimer complex is rate-determining. The most electronegative halogen makes the ipso carbon most electrophilic and stabilises the developing negative charge; C–F cleavage occurs in the fast second step.

Practice Q3. 2-Bromoanisole is treated with NaNH₂ in liquid ammonia. The major product is:

(a) 2-methoxyaniline (b) 3-methoxyaniline (c) 4-methoxyaniline (d) 2-bromo-3-methoxyaniline

Answer: (b)

Deprotonation at C3 (the only H ortho to Br) and loss of Br⁻ give 3-methoxybenzyne (the triple bond between C1 and C2, OMe on the adjacent carbon). NH₂⁻ adds at the carbon remote from OMe so that the aryl anion forms next to the inductively withdrawing OCH₃ group. Protonation gives 3-methoxyaniline: a cine product.

Practice Q4. A substituted benzene ArH is nitrated 0.033 times as fast as benzene and gives 30 % ortho, 1 % meta and 69 % para product (illustrative data). The para partial rate factor \( f_p \) is closest to:

(a) 0.023 (b) 0.14 (c) 0.69 (d) 1.4

Answer: (b)

\( f_p = 0.033 \times 6 \times 0.69 = 0.137 \approx 0.14 \). Less than 1, so the para position is deactivated relative to a benzene position, yet it is still the favoured site: the pattern of a halogen substituent. (a) ignores the factor 6; (c) is just the fraction.

Level 3: Part C Style

Practice Q5. Chlorobenzene labelled with ¹⁴C at C1 is treated with KNH₂ in liquid NH₃. Separately, 2,6-dimethylchlorobenzene is treated under the same conditions, and in a third experiment chlorobenzene and KNH₂ react in the presence of furan. Which statements are correct?

  1. The aniline formed from labelled chlorobenzene has the label distributed nearly equally between C1 and C2 (relative to NH₂ at C1).
  2. 2,6-Dimethylchlorobenzene is essentially unreactive because it has no hydrogen ortho to Cl.
  3. In the presence of furan, a Diels–Alder adduct of benzyne is isolated.
  4. The reaction of chlorobenzene is an addition–elimination via a Meisenheimer complex.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  1. Benzyne makes C1 and C2 equivalent; amide adds to either end, giving ipso and cine products in about equal amounts. Correct.
  2. Without an ortho H there is no elimination to benzyne, and without activation there is no SNAr. Correct.
  3. Benzyne is a reactive dienophile and is trapped by furan to give 1,4-dihydro-1,4-epoxynaphthalene. Correct.
  4. There is no electron-withdrawing group to stabilise a Meisenheimer complex; this is elimination–addition. Wrong.

Practice Q6. In competitive nitration, toluene reacts 24 times as fast as benzene and gives 60 % ortho, 3 % meta and 37 % para product; tert-butylbenzene reacts 15 times as fast as benzene and gives 12 % ortho, 8 % meta and 80 % para product (all values illustrative). Which statements are correct?

  1. \( f_p \) for toluene is about 53.
  2. \( f_o \) for tert-butylbenzene is lower than \( f_o \) for toluene, consistent with steric hindrance by the larger alkyl group.
  3. For both compounds, \( f_m > 1 \), consistent with a weak activating effect even at the meta position.
  4. The \( f_p/f_m \) ratio is larger for tert-butylbenzene than for toluene.

(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

Toluene: \( f_o = 24 \times 3 \times 0.60 = 43.2 \); \( f_m = 24 \times 3 \times 0.03 = 2.16 \); \( f_p = 24 \times 6 \times 0.37 = 53.3 \). tert-Butylbenzene: \( f_o = 15 \times 3 \times 0.12 = 5.4 \); \( f_m = 15 \times 3 \times 0.08 = 3.6 \); \( f_p = 15 \times 6 \times 0.80 = 72 \).

  1. 53.3. Correct.
  2. 5.4 against 43.2: ortho attack is strongly suppressed by the bulky group. Correct.
  3. 2.16 and 3.6, both above 1. Correct.
  4. Toluene 53.3/2.16 = 24.7; tert-butylbenzene 72/3.6 = 20. The ratio is smaller for tert-butylbenzene. Wrong.

Practice Q7. Iodobenzene does not react with the potassium enolate of acetone in liquid ammonia in the dark. Under near-UV irradiation it gives phenylacetone in good yield; the reaction is suppressed by a small amount of di-tert-butylnitroxide, and 4-iodotoluene gives only 4-methylphenylacetone (no 3-isomer). The best mechanistic interpretation is:

(a) SNAr via a Meisenheimer complex (b) elimination–addition via benzyne (c) SRN1 radical-chain substitution through aryl radicals and radical anions (d) SN1 through a phenyl cation

Answer: (c)

Photostimulation, inhibition by a radical scavenger and the absence of any activating group point to a radical chain. The absence of the cine (3-) isomer rules out benzyne, which would give a mixture with 4-iodotoluene. SNAr needs strong o/p acceptors, and phenyl cations are not formed from iodobenzene under these conditions.

Quick Revision Table

IdeaFact
SEAr stepsE⁺ generation → arenium ion (slow) → loss of H⁺ (fast)
KIE in SEAr≈ 1 for nitration; primary KIE in sulfonation
o/p directors–O⁻, –NR₂, –OH, –OR, –NHCOR, alkyl, aryl, halogens
meta directors–NO₂, –CN, –SO₃H, –CF₃, –NR₃⁺, –CHO, –COR, –CO₂R
Halogensdeactivate, but o/p
Partial rate factor\( f_x = (k_{\text{ArH}}/k_{\text{PhH}})(6/n_x)(\text{fraction}_x) \)
Friedel–Craftsalkylation: rearrangement, polyalkylation; acylation: neither; fails on deactivated rings and anilines
Ipso–SO₃H, –SiR₃, –CMe₃, –CO₂H can be replaced
Naphthaleneα kinetic; 2-SO₃H thermodynamic
SNAro/p EWG; Meisenheimer complex; F > Cl ≈ Br > I; second order
BenzyneNaNH₂/NH₃; ortho H required; ¹⁴C split C1/C2; furan trap; cine product
Aryne regiochemistrycarbanion forms next to −I group (2-bromoanisole → m-anisidine)
SRN1light, radical-anion chain, scavenger-inhibited, no cine
DiazoniumN₂ loss; phenols, ArF (Balz–Schiemann); Sandmeyer is radical (Cu)

Key Takeaways

What’s Next