Stereospecific and Stereoselective Reactions
CSIR NET: stereospecific vs stereoselective, enantio- and diastereoselectivity, ee, de, dr, ΔΔG‡ and the classic stereospecific additions and eliminations.
- 14 min
On this page · 13 sections
Prerequisites
- Stereogenicity, Chirality and Configurational Isomerism: enantiotopic and diastereotopic faces, Re/Si, meso compounds, ee.
- Conformational Isomerism in Acyclic Systems: anti-periplanar geometry and the Curtin–Hammett principle.
- Cyclic Systems: Configuration and Conformation: axial versus equatorial attack and trans-diaxial reactions.
- Rate Laws and Temperature Dependence: selectivity is a ratio of two rate constants.
The Hook: Two Butenes, Two Dibromides
The Vocabulary
- Stereoselective reaction: one in which a single reactant can give two or more stereoisomeric products, and one (or one set) is formed preferentially. Selectivity is a matter of degree (55:45 to > 99:1).
- Stereospecific reaction: one in which stereoisomeric starting materials give stereoisomerically different products, because the mechanism fixes the stereochemical course. It describes the relationship between substrate and product stereochemistry.
- Enantioselective reaction: a stereoselective reaction giving one enantiomer in excess. It requires a chiral, non-racemic agent somewhere: reagent, catalyst, auxiliary, enzyme or solvent.
- Diastereoselective reaction: a stereoselective reaction giving one diastereomer in excess. It can happen with entirely achiral, racemic or enantiopure components.
Clarifications that the exam tests:
- A reaction that is 100% stereoselective is not thereby stereospecific. Stereospecificity is about different starting stereoisomers giving different product stereoisomers. Bromination of 2-butene is stereospecific; reduction of 4-tert-butylcyclohexanone by LiAlH₄ is (diastereo)selective.
- Most stereospecific reactions are also stereoselective, since each substrate isomer gives mainly one product.
- Stereoconvergent: different starting stereoisomers give the same product stereoisomer (the opposite of stereospecific), for example through a common planar intermediate.
- Regioselective (which position) and chemoselective (which functional group) are separate ideas; a single reaction can be all three.
graph TD
Q1{"Do stereoisomeric
substrates give different
stereoisomeric products
by mechanism?"} -->|"yes"| SS["Stereospecific
(Br2 anti addition, SN2,
OsO4 syn addition)"]
Q1 -->|"no, or only one substrate"| Q2{"Is one product
stereoisomer formed
in excess?"}
Q2 -->|"no"| NS["Non-selective
(racemate or
statistical mixture)"]
Q2 -->|"yes"| Q3{"Are the favoured and
disfavoured products
enantiomers?"}
Q3 -->|"yes"| ES["Enantioselective
needs a chiral,
non-racemic agent"]
Q3 -->|"no: diastereomers"| DS["Diastereoselective
(Felkin-Anh addition,
endo Diels-Alder)"]Measuring Selectivity
The same expressions with diastereomers give dr and de.
Under kinetic control, with two competing transition states:
$$\text{er (or dr)} = \frac{k_{\text{major}}}{k_{\text{minor}}} = e^{\Delta\Delta G^\ddagger/RT}, \qquad \Delta\Delta G^\ddagger = RT\ln(\text{er})$$| er | ee | ΔΔG‡ at 298 K (kJ mol⁻¹) |
|---|---|---|
| 1:1 | 0% | 0 |
| 3:1 | 50% | 2.7 |
| 9:1 | 80% | 5.4 |
| 19:1 | 90% | 7.3 |
| 49:1 | 96% | 9.6 |
| 99:1 | 98% | 11.4 |
| 199:1 | 99% | 13.1 |
Three lessons from this table:
- Small energies, large effects. A 98% ee needs only about 11 kJ mol⁻¹ between transition states, less than a weak hydrogen bond.
- Every 5.7 kJ mol⁻¹ multiplies er by 10 at 298 K.
- Cooling helps. If \( \Delta\Delta G^\ddagger \) is essentially enthalpic, er = \( e^{\Delta\Delta H^\ddagger/RT} \) grows as T falls. A reaction giving 9:1 at 298 K would give about 29:1 at 195 K (−78 °C) on that assumption, which is why so many selective reactions are run cold.
When products equilibrate (thermodynamic control), the ratio reflects \( \Delta G^\circ \) of the products instead: the more stable diastereomer wins (trans-1,4-disubstituted ring, E-alkene). Enantiomers have equal \( G^\circ \), so thermodynamic control can never produce an ee.
Stereospecific Reactions: the Core Catalogue
Substitution and elimination
| Reaction | Stereochemical course | Consequence |
|---|---|---|
| SN2 | inversion (Walden inversion): backside attack | (R)-2-bromobutane + OH⁻ → (S)-2-butanol. The descriptor flips only if the priority order is preserved, so always redraw and reassign |
| SN1 | planar carbocation; racemisation, usually with some excess inversion (ion pairs shield one face) | not stereospecific |
| SNi (SOCl₂ without base) | retention | with pyridine present, inversion (SN2 by chloride) |
| Double inversion (neighbouring-group participation) | net retention | e.g. α-carboxylate or α-acetoxy participation |
| E2 | anti-periplanar H and leaving group | meso-1,2-dibromo-1,2-diphenylethane + I⁻ → (E)-stilbene; dl → (Z)-stilbene |
| Ei (Cope elimination of amine oxides; ester and xanthate (Chugaev) pyrolysis) | syn elimination via a cyclic transition state | the opposite alkene geometry from E2 on the same diastereomer |
Additions to alkenes
| Reaction | Mode | (Z)-2-butene gives | (E)-2-butene gives |
|---|---|---|---|
| Br₂ (via bromonium ion) | anti | (±)-2,3-dibromobutane | meso-2,3-dibromobutane |
| OsO₄ (then reductive work-up), or cold dilute KMnO₄ | syn | meso-butane-2,3-diol | (±)-butane-2,3-diol |
| Peracid epoxidation (mCPBA) | syn (concerted) | cis-2,3-epoxybutane (meso) | (±)-trans-2,3-epoxybutane |
| Epoxidation then acid hydrolysis (anti opening) | net anti dihydroxylation | (±)-butane-2,3-diol | meso-butane-2,3-diol |
| H₂ on Pd or Pt | syn | butane (no stereocentre); but 1,2-dimethylcyclohexene gives cis-1,2-dimethylcyclohexane | — |
| Hydroboration–oxidation | syn; anti-Markovnikov | used in rings: 1-methylcyclohexene gives trans-2-methylcyclohexanol | — |
| Simmons–Smith (CH₂I₂/Zn–Cu) | syn (concerted) | cis-1,2-dimethylcyclopropane | trans-1,2-dimethylcyclopropane |
| Singlet carbene addition | stereospecific (concerted) | cis cyclopropane | trans cyclopropane |
| Triplet carbene addition | not stereospecific (stepwise via a diradical that can rotate) | mixture | mixture |
Pericyclic reactions
- Diels–Alder is suprafacial on both components: the relative configuration of substituents on the dienophile is kept in the product (cis dienophile → cis substituents in the ring), and the “outside” and “inside” substituents of the diene end up cis to each other on the same face. This is stereospecific.
- Electrocyclic reactions are stereospecific through the rotation mode: thermal 4π electron systems react conrotatory, thermal 6π disrotatory, and the photochemical modes are reversed (Woodward–Hoffmann rules). (E,Z)- versus (E,E)-dienes therefore give cis versus trans ring products.
Stereoselective (Not Specific) Reactions
Diastereoselective examples
| Reaction | Selectivity | Origin |
|---|---|---|
| E2 of 2-bromobutane | (E)-2-butene > (Z)-2-butene | lower-energy anti-periplanar TS has the methyl groups anti |
| Reduction of 4-tert-butylcyclohexanone | small hydride: equatorial OH; bulky hydride: axial OH | torsional versus steric control of the attack face |
| Diels–Alder endo rule | endo adduct favoured under kinetic control (cyclopentadiene + maleic anhydride) | secondary orbital interactions of the dienophile’s π-acceptor with the diene; the exo adduct is usually the thermodynamic product |
| Alkyne reduction | Lindlar catalyst (H₂, poisoned Pd): (Z)-alkene; Na/NH₃(l): (E)-alkene | syn addition on the surface versus a radical-anion/vinyl-anion route that relaxes to trans |
| Wittig reaction | unstabilised ylides: mainly (Z)-alkene; stabilised ylides: mainly (E)-alkene | kinetic oxaphosphetane formation versus more reversible, product-like TS |
| Horner–Wadsworth–Emmons | mainly (E)-α,β-unsaturated ester | |
| Aldol (Zimmerman–Traxler) | (Z)-enolate → syn aldol; (E)-enolate → anti aldol | chair-like six-membered metal-chelated TS with the aldehyde R group equatorial |
The aldol line deserves attention. With respect to the enolate geometry, the Zimmerman–Traxler aldol is stereospecific (Z → syn, E → anti); with respect to the two new stereocentres, it is simply diastereoselective: it chooses a relative configuration without any existing stereocentre to guide it. Boron enolates give the tightest transition states and the highest selectivities.
- Simple diastereoselectivity: two new stereocentres form in one step and their relative configuration is controlled (aldol syn/anti, Diels–Alder endo/exo).
- Induced diastereoselectivity (asymmetric induction): an existing stereocentre controls the configuration of a new one (Cram, Felkin–Anh, chelation control, chiral auxiliaries). This is the subject of Asymmetric Induction.
Enantioselective examples
An achiral substrate with enantiotopic faces or groups gives a racemate with any achiral reagent, because the two competing transition states are enantiomeric and have exactly equal energies. Only a chiral, non-racemic component makes them diastereomeric and unequal in energy. Typical cases:
- Enzymatic reductions (enantiotopic faces of a ketone) and hydrolyses (enantiotopic ester groups).
- Asymmetric hydrogenation, epoxidation and dihydroxylation with chiral catalysts.
- Reactions of a substrate carrying a chiral auxiliary (diastereoselective step; enantioselective overall once the auxiliary is removed).
All of these are treated on the next page.
Memory Tricks
Don’t Confuse
| This | Is not this |
|---|---|
| Stereospecific: stereoisomeric substrates → stereoisomerically different products | Stereoselective: one product preferred, from one substrate |
| Enantioselective: products are enantiomers; needs a chiral agent | Diastereoselective: products are diastereomers; possible without a chiral agent |
| ee: excess of one enantiomer | de: excess of one diastereomer |
| Kinetic ratio: \( e^{\Delta\Delta G^\ddagger/RT} \) | Thermodynamic ratio: \( e^{-\Delta G^\circ/RT} \); never gives ee |
| OsO₄: syn diol | Epoxidation + hydrolysis: anti diol |
| Singlet carbene: stereospecific | Triplet carbene: stereorandom |
| E2: anti-periplanar | Ei (Cope, Chugaev): syn |
| Endo (kinetic, Diels–Alder) | Exo (often thermodynamic) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not taken from any CSIR NET paper. Use R = 8.314 J K⁻¹ mol⁻¹.
Level 1: Foundation
- Is the addition of Br₂ to (E)-2-butene stereospecific, stereoselective or both?
- What ee corresponds to an enantiomer ratio of 19:1?
- Which enolate geometry gives the syn aldol in a Zimmerman–Traxler transition state?
Answers
- Both. (E) gives meso and (Z) gives racemate (stereospecific), and each gives essentially one diastereomer (stereoselective).
- 90%: (19 − 1)/(19 + 1).
- (Z)-enolate.
Level 2: Part B Style
Practice Q1. Treatment of (Z)-2-butene with OsO₄ followed by aqueous NaHSO₃ gives
(a) meso-butane-2,3-diol (b) (±)-butane-2,3-diol (c) (2R,3R)-butane-2,3-diol only (d) a 1:1 mixture of meso and (±) diols
Answer: (a)
OsO₄ adds syn. Syn addition of two identical OH groups to a Z alkene gives the meso diol. (c) is impossible with achiral reagents.
Practice Q2. Which reaction is not stereospecific?
(a) Simmons–Smith cyclopropanation of (Z)-2-butene (b) addition of triplet methylene to (Z)-2-butene (c) mCPBA epoxidation of (E)-2-butene (d) SN2 reaction of (R)-2-bromooctane with azide
Answer: (b)
Triplet carbene adds stepwise through a 1,3-diradical; rotation about the former C=C bond before ring closure scrambles the geometry, giving both cis and trans cyclopropanes. The other three are concerted or backside processes with a fixed stereochemical course.
Practice Q3. A catalytic reaction gives an er of 19:1 at 298 K. The difference in free energy of activation for the two enantiomeric pathways is closest to
(a) 2.7 kJ mol⁻¹ (b) 5.4 kJ mol⁻¹ (c) 7.3 kJ mol⁻¹ (d) 11.4 kJ mol⁻¹
Answer: (c)
\( \Delta\Delta G^\ddagger = RT\ln 19 = 8.314 \times 298 \times 2.944 = 7.30 \) kJ mol⁻¹. (b) corresponds to 9:1, (d) to 99:1.
Practice Q4. The Diels–Alder reaction of cyclopentadiene with maleic anhydride at room temperature gives mainly the endo adduct. This is an example of
(a) a stereospecific but non-selective reaction (b) kinetic diastereoselectivity (c) thermodynamic enantioselectivity (d) a stereoconvergent reaction
Answer: (b)
Endo and exo adducts are diastereomers; the endo preference comes from the lower-energy (secondary orbital interaction) transition state, i.e. kinetic control. No enantioselection is possible (achiral components), so (c) is wrong; thermodynamic control would tend toward exo.
Level 3: Part C Style
Practice Q5. A diastereoselective reaction gives a ratio of 9:1 at 298 K. Assume \( \Delta\Delta G^\ddagger \) is temperature-independent (\( \Delta\Delta S^\ddagger \approx 0 \)) and the reaction is under kinetic control.
Which statements are correct?
- \( \Delta\Delta G^\ddagger \approx 5.4 \) kJ mol⁻¹.
- At 195 K, the ratio rises to about 29:1.
- At 195 K, the de is about 93%.
- If the product diastereomers equilibrated, the ratio would still be 9:1.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 1 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. \( RT\ln 9 = 8.314\times298\times2.197 = 5.45 \) kJ mol⁻¹.
- Correct. \( e^{5447/(8.314\times195)} = e^{3.36} = 28.8 \).
- Correct. de = (28.8 − 1)/(28.8 + 1) = 0.93.
- Wrong. Under equilibrium the ratio depends on \( \Delta G^\circ \) between the products, which is unrelated to the transition-state difference.
Practice Q6. (E)-2-Butene is converted to butane-2,3-diol by two routes: route X, OsO₄ then NaHSO₃; route Y, mCPBA then dilute aqueous acid. All reagents are achiral.
Which statements are correct?
- Route X gives the racemic diol.
- Route Y gives the meso diol.
- The epoxide formed in route Y is chiral but racemic.
- Route Y gives an excess of the (2R,3R)-diol because acid opening is anti.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. Syn addition to an E alkene → racemate.
- Correct. Syn epoxidation keeps the trans geometry (racemic trans-epoxide, which is \( C_2 \), chiral); anti opening at either carbon then gives the meso diol (net anti addition to E → meso).
- Correct. trans-2,3-Epoxybutane has a \( C_2 \) axis only; both enantiomers form equally.
- Wrong. No chiral agent is present, and in any case the product is meso.
Practice Q7. An aldol reaction with a chiral catalyst gives four stereoisomers (descriptors as assigned for this hypothetical substrate pair): syn-(2R,3S) 72%, syn-(2S,3R) 18%, anti-(2R,3R) 8%, anti-(2S,3S) 2%.
Which statements are correct?
- The diastereomeric ratio syn:anti is 9:1 (de 80%).
- The ee of the syn diastereomer is 60%.
- The ee of the anti diastereomer is 60%.
- The reaction is enantioselective but not diastereoselective.
(a) 1, 2 and 3 only (b) 1 and 2 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- Correct. syn = 72 + 18 = 90; anti = 8 + 2 = 10; dr 9:1, de = 80%.
- Correct. (72 − 18)/90 = 0.60.
- Correct. (8 − 2)/10 = 0.60.
- Wrong. It is both diastereoselective (9:1 syn) and enantioselective (60% ee within each diastereomer).
Quick Revision Table
| Idea | Fact |
|---|---|
| Stereospecific | stereoisomeric substrates → different stereoisomeric products by mechanism |
| Stereoselective | one product stereoisomer preferred |
| Enantioselective | needs a chiral, non-racemic agent; TSs diastereomeric |
| Diastereoselective | possible with achiral reagents; simple vs induced |
| ee from er | (er − 1)/(er + 1); major fraction (1 + ee)/2 |
| Energy | \( \Delta\Delta G^\ddagger = RT\ln(\text{er}) \); 5.7 kJ mol⁻¹ per factor 10 at 298 K |
| Br₂ | anti: Z → (±), E → meso |
| OsO₄, KMnO₄ (cold) | syn: Z → meso, E → (±) |
| Epoxide + H₃O⁺ | net anti: opposite of OsO₄ |
| SN2 / SN1 / SNi | inversion / racemisation / retention |
| E2 / Ei | anti / syn |
| Carbenes | singlet stereospecific; triplet not |
| Diels–Alder | suprafacial (stereospecific); endo (kinetic, diastereoselective) |
| Aldol | Z-enolate → syn; E-enolate → anti (chair TS) |
| Alkynes | Lindlar → Z; Na/NH₃ → E |
Key Takeaways
What’s Next
- Asymmetric Induction: Cram, Felkin–Anh and chelation models, chiral auxiliaries, asymmetric catalysis and kinetic resolution.
- Organometallic Homogeneous Catalysis: the metal side of asymmetric hydrogenation.
- Back to Conformational Isomerism in Acyclic Systems for the Curtin–Hammett argument behind every kinetic selectivity.
- Stereochemistry: Quick Revision.