IR Spectroscopy of Organic Compounds
CSIR NET organic spectroscopy: IR group frequencies, carbonyl shifts from conjugation, ring strain and H-bonding, fingerprint bands and spectrum reading.
- 20 min
On this page · 16 sections
- Prerequisites
- The Hook: One Band, Five Compounds
- From the Oscillator to Group Frequencies
- The Correlation Table You Must Own
- The Carbonyl Stretch: Reading 1650–1850 cm⁻¹
- Hydrogen Bonding and the Dilution Test
- Alkenes and Aromatics: Substitution Patterns from C–H Bends
- Nitrogen Compounds at a Glance
- A Systematic Way to Read a Spectrum
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Vibrational Spectra of Diatomic Molecules: the harmonic oscillator, \( \tilde{\nu} = \frac{1}{2\pi c}\sqrt{k/\mu} \), anharmonicity and overtones. This page uses those results without re-deriving them.
- IR and Raman Activity: Selection Rules: why a vibration must change the dipole moment to absorb, and why symmetric stretches can be IR-silent.
- Functional-group chemistry at BSc level: resonance, inductive effects and hydrogen bonding.
The Hook: One Band, Five Compounds
From the Oscillator to Group Frequencies
The two variables: force constant and reduced mass
Treat a bond as a harmonic spring. The fundamental absorption wavenumber is
$$\tilde{\nu} = \frac{1}{2\pi c}\sqrt{\frac{k}{\mu}}, \qquad \mu = \frac{m_1 m_2}{m_1 + m_2}$$with \( k \) the force constant (N m⁻¹), \( \mu \) the reduced mass (kg) and \( c \) in cm s⁻¹ so that \( \tilde{\nu} \) comes out in cm⁻¹. Two qualitative rules follow at once:
| Change | Effect on \( \tilde{\nu} \) | Example |
|---|---|---|
| Stronger bond (larger \( k \)) | higher | C≡C (about 2100–2260) > C=C (about 1620–1680) > C–C (about 1200, weak, rarely useful) |
| Heavier atom (larger \( \mu \)) | lower | C–H about 3000, C–D about 2200; C–O about 1100, C–Cl about 750 |
| H attached to any heavy atom | high, isolated | O–H, N–H, C–H all above 2700 cm⁻¹ |
For the same force constant,
$$\frac{\tilde{\nu}(\text{X–D})}{\tilde{\nu}(\text{X–H})} = \sqrt{\frac{\mu(\text{X–H})}{\mu(\text{X–D})}}$$For C–H/C–D this ratio is 0.734, so a C–H stretch at 2950 cm⁻¹ moves to about 2166 cm⁻¹. For O–H/O–D the ratio is 0.728 (3600 → about 2620 cm⁻¹). The ratio is close to, but not exactly, \( 1/\sqrt{2} = 0.707 \), because the carbon or oxygen is not infinitely heavy.
Why “group frequencies” work
A polyatomic molecule with \( N \) atoms has \( 3N - 6 \) normal modes (\( 3N - 5 \) if linear), and strictly every mode involves every atom. In practice a bond whose frequency is well separated from its neighbours (O–H, N–H, C–H, C≡N, C=O) vibrates almost independently. Its band appears in a narrow, transferable range: a group frequency. Where several similar bonds are coupled (C–C, C–O, C–N single bonds; bending modes), the bands are characteristic of the whole molecule: the fingerprint.
graph LR
A["4000-2500 cm⁻¹
X-H stretches
O-H, N-H, C-H"] --> B["2500-2000 cm⁻¹
triple and cumulated
C≡N, C≡C, C=C=O, N=C=O"]
B --> C["2000-1500 cm⁻¹
double bonds
C=O, C=C, C=N, NO₂ asym"]
C --> D["1500-400 cm⁻¹
fingerprint
C-O, C-N, bends, oop C-H"]The Correlation Table You Must Own
X–H stretching region (4000–2500 cm⁻¹)
| Bond | Position (cm⁻¹) | Shape and comment |
|---|---|---|
| O–H, free (dilute, gas) | 3600–3650 | sharp, medium |
| O–H, H-bonded alcohol/phenol | 3200–3550 | broad, strong |
| O–H, carboxylic acid dimer | 2500–3300 | very broad, overlaps C–H; often with small “shoulders” |
| N–H, primary amine (–NH₂) | two bands, about 3300–3500 | asymmetric (higher) and symmetric stretch |
| N–H, secondary amine | one band, about 3300–3350 | weaker than O–H |
| N–H, tertiary amine | none | |
| N–H, amide | about 3150–3500 | primary amide two bands, secondary one |
| ≡C–H (terminal alkyne) | about 3300 | sharp, strong; easily confused with N–H |
| =C–H (alkene, arene) | 3000–3100 | just above 3000 |
| C–H (alkane, sp³) | 2850–2960 | just below 3000 |
| O=C–H (aldehyde) | about 2820 and 2720 | two weak bands (Fermi doublet) |
The 3000 cm⁻¹ line is the single most useful landmark: bands above it mean sp² or sp C–H; bands only below it mean a saturated compound.
Triple and cumulated bonds (2500–2000 cm⁻¹)
| Group | Position (cm⁻¹) | Comment |
|---|---|---|
| C≡N (nitrile) | about 2210–2260 | sharp, medium; conjugation lowers it |
| C≡C, terminal | about 2100–2140 | weak to medium |
| C≡C, internal | about 2190–2260 | weak, absent if symmetric |
| N=C=O (isocyanate) | about 2250–2275 | very strong, broad |
| N₃ (azide) | about 2100–2160 | strong |
| C=C=O (ketene) | about 2150 | strong |
| C=C=C (allene) | about 1950 | medium |
| CO₂ (atmospheric, background) | about 2350 | artefact, not the sample |
Double-bond region (2000–1500 cm⁻¹)
| Group | Position (cm⁻¹) | Comment |
|---|---|---|
| C=O | 1650–1850 | see the carbonyl section below |
| C=C, alkene | 1620–1680 | medium to weak; conjugation lowers and intensifies it |
| C=C, aromatic ring | about 1600 and 1500 (also about 1580, 1450) | pairs of sharp bands |
| C=N | 1640–1690 | |
| NO₂ (nitro) | about 1550 (asym) and 1350 (sym) | both strong: the “nitro pair” |
| N–H bend, primary amine | 1580–1650 | |
| Amide II (N–H bend + C–N stretch) | about 1510–1570 (secondary amide) |
Fingerprint region (1500–400 cm⁻¹)
| Group | Position (cm⁻¹) | Comment |
|---|---|---|
| CH₃ / CH₂ bends | about 1375 and 1460 | gem-dimethyl or isopropyl splits the 1375 band into a doublet |
| C–O (alcohols, ethers, esters) | 1000–1300 | strong; esters show two (C(=O)–O and O–C) |
| C–N | 1020–1250 | |
| C–F / C–Cl / C–Br | 1000–1400 / 600–800 / 500–600 | heavier halogen, lower band |
| S=O (sulfone) | about 1300 and 1150 | asymmetric and symmetric |
| =C–H out-of-plane bends | 650–1000 | substitution pattern (tables below) |
The Carbonyl Stretch: Reading 1650–1850 cm⁻¹
The C=O band is the strongest in most spectra, and its exact position is the most information-rich number in the whole technique. Start from a saturated, open-chain ketone at 1715 cm⁻¹ and apply four corrections.
Baseline values
| Carbonyl type (saturated, acyclic) | \( \tilde{\nu}_{\text{C=O}} \) (cm⁻¹) |
|---|---|
| Acid chloride, RCOCl | about 1800 (1785–1815) |
| Anhydride, (RCO)₂O | two bands, about 1820 and 1760 |
| Ester, RCO₂R′ | 1735–1750 |
| Aldehyde, RCHO | about 1725 (1720–1740) |
| Ketone, RCOR′ | about 1715 |
| Carboxylic acid (H-bonded dimer) | about 1710 |
| Amide, RCONR′₂ (amide I) | about 1640–1690 |
| Carboxylate ion, RCO₂⁻ | about 1550–1610 (asym) and 1400 (sym) |
Correction 1: inductive versus resonance effect of X in R–CO–X
Two opposing effects decide where each derivative sits:
- Inductive withdrawal by an electronegative X pulls electron density from carbon, shortens the C=O and raises \( k \) (raises \( \tilde{\nu} \)).
- Resonance donation by a lone pair on X (R–C(=O)–X ↔ R–C(–O⁻)=X⁺) gives the C=O partial single-bond character and lowers \( \tilde{\nu} \).
| X | Dominant effect | Result |
|---|---|---|
| Cl | strong –I, poor resonance (3p–2p overlap) | highest, about 1800 |
| OR | –I outweighs +R | above ketone, 1735–1750 |
| H, alkyl | reference | 1715–1730 |
| NR₂ | strong +R (N is a good donor) | lowest, about 1650–1690 |
| O⁻ | full delocalisation over two equal C–O bonds | no C=O band; two CO₂⁻ bands instead |
Correction 2: conjugation lowers the frequency
Conjugation with C=C or an aryl ring delocalises the π bond, lowering its bond order. The typical drop is 20–40 cm⁻¹.
| Compound | \( \tilde{\nu}_{\text{C=O}} \) (cm⁻¹), approximate |
|---|---|
| Saturated ketone | 1715 |
| α,β-Unsaturated ketone | 1665–1685 |
| Aryl alkyl ketone (acetophenone type) | 1680–1690 |
| Diaryl ketone (benzophenone type) | about 1665 |
| Saturated ester | 1735–1750 |
| α,β-Unsaturated or aryl ester | 1715–1730 |
The C=C stretch of an enone is also lowered and becomes much more intense, because conjugation polarises it.
Correction 3: ring strain raises the frequency of a cyclic carbonyl
Squeezing the internal C–C(=O)–C angle below 120° forces the carbon to use more p character in the ring bonds and more s character in the C=O σ bond, which stiffens it. Each step down in ring size raises the band.
| Ring size | Cycloalkanone (cm⁻¹) | Lactone (cm⁻¹) | Lactam (cm⁻¹) |
|---|---|---|---|
| 6 | about 1715 | δ-lactone, about 1735–1750 | δ-lactam, about 1670 |
| 5 | about 1745 | γ-lactone, about 1770 | γ-lactam, about 1700 |
| 4 | about 1780 | β-lactone, about 1820–1840 | β-lactam, about 1730–1760 |
The β-lactam band of penicillins appears near 1770 cm⁻¹, far above an ordinary amide: a quick IR test that the four-membered ring is intact.
Correction 4: hydrogen bonding and field effects
- H-bonding to the carbonyl oxygen lowers \( \tilde{\nu}_{\text{C=O}} \). Carboxylic acids exist as cyclic H-bonded dimers (C=O about 1710); the monomer, seen in dilute solution or vapour, absorbs near 1760. Methyl salicylate and o-hydroxyacetophenone, with a strong intramolecular O–H···O=C bond, absorb about 30–50 cm⁻¹ below their para isomers.
- Electronegative α-substituents raise it when they lie close to the C=O oxygen (field effect). In α-chlorocyclohexanones the conformer with equatorial Cl (C–Cl roughly eclipsing C=O) absorbs about 20 cm⁻¹ higher than the axial conformer. This is the basis of the old “α-haloketone rule” used in steroid stereochemistry.
- Kinetic coupling splits two identical carbonyls attached to a common atom into symmetric and antisymmetric combinations: anhydrides and imides show two C=O bands. For open-chain anhydrides the higher band is stronger; for cyclic anhydrides the lower one is stronger.
Hydrogen Bonding and the Dilution Test
O–H and N–H bands are broadened and shifted to lower wavenumber by H-bonding (the X–H bond is weakened). The dilution test separates the two kinds of H-bond:
| Observation on dilution in CCl₄ | Interpretation |
|---|---|
| Broad band at about 3350 weakens; sharp band at about 3620 grows | intermolecular H-bonding (breaks as molecules separate) |
| Band position and relative intensity unchanged | intramolecular H-bonding (within one molecule, concentration-independent) |
Classic pairs where the test decides:
- o-Nitrophenol (intramolecular, unchanged on dilution) versus p-nitrophenol (intermolecular, changes). The same intramolecular H-bond explains why o-nitrophenol is steam-volatile.
- cis-Cyclopentane-1,2-diol (intramolecular O–H···O possible) versus the trans diol (OH groups too far apart; only intermolecular).
graph TD
A["Broad O-H band
about 3200-3550 cm⁻¹"] --> B{"Dilute progressively
in CCl₄"}
B -->|"Band shifts to about 3620,
sharpens"| C["Intermolecular H-bond"]
B -->|"Band unchanged"| D["Intramolecular H-bond
(chelate, 1,2-diol cis, o-substituted phenol)"]
A --> E{"Band spans 2500-3300
with C=O near 1710?"}
E -->|Yes| F["Carboxylic acid dimer"]Alkenes and Aromatics: Substitution Patterns from C–H Bends
The out-of-plane (oop) =C–H bending bands below 1000 cm⁻¹ are strong and pattern-specific.
| Alkene type | oop band(s) (cm⁻¹), approximate |
|---|---|
| Monosubstituted, RCH=CH₂ | about 990 and 910 (two bands) |
| 1,1-Disubstituted, R₂C=CH₂ | about 890 |
| trans-RCH=CHR | about 965–970 |
| cis-RCH=CHR | about 675–730 (broad, variable) |
| Trisubstituted | about 800–840 |
| Benzene substitution | oop band(s) (cm⁻¹), approximate |
|---|---|
| Monosubstituted | about 730–770 and 690–710 (two strong bands) |
| ortho-Disubstituted | about 735–770 (one band) |
| meta-Disubstituted | about 750–810 and 690–710 (plus about 860–900) |
| para-Disubstituted | about 800–860 (one band) |
Weak overtone and combination bands between 2000 and 1650 cm⁻¹ (“benzene fingers”) also follow the substitution pattern, but are rarely needed when NMR is available.
Nitrogen Compounds at a Glance
| Class | Diagnostic bands (cm⁻¹) |
|---|---|
| Primary amine RNH₂ | two N–H stretches 3300–3500; N–H bend 1580–1650; broad N–H wag about 650–900 |
| Secondary amine R₂NH | one weak N–H stretch about 3300–3350 |
| Tertiary amine | no N–H; only C–N in the fingerprint |
| Primary amide RCONH₂ | two N–H stretches; amide I about 1650–1690; amide II (N–H bend) about 1600–1640 |
| Secondary amide RCONHR′ | one N–H stretch; amide I about 1640–1680; amide II about 1510–1570 |
| Ammonium salts | very broad N–H⁺ absorption about 2200–3000 |
| Nitrile | 2210–2260 |
| Nitro | 1550 and 1350 |
A Systematic Way to Read a Spectrum
graph TD
S["Molecular formula → degree of unsaturation"] --> A{"Strong band 1650-1850?"}
A -->|Yes| B["Carbonyl: check 2720/2820 (aldehyde),
2500-3300 broad (acid), 1000-1300 (ester C-O),
N-H (amide), two C=O (anhydride)"]
A -->|No| C{"Broad 3200-3550?"}
C -->|Yes| D["Alcohol or phenol: check C-O 1000-1260"]
C -->|No| E{"3300-3500 one or two bands?"}
E -->|Yes| F["Amine (count bands)"]
E -->|No| G["Check 2100-2260 (C≡N, C≡C),
1600/1500 (arene), 1550/1350 (NO₂),
C-H above or below 3000"]Work in this order: first the presence or absence of C=O, then O–H/N–H, then C–H above or below 3000 cm⁻¹, then the 2000–2300 window, then aromatic pairs and oop bends. Do not try to assign every fingerprint band.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| ≡C–H stretch, about 3300, sharp and strong | N–H stretch, 3300–3500, broader; O–H broader still | |
| Carboxylic acid O–H, 2500–3300, extremely broad | Alcohol O–H, 3200–3550, broad but centred higher | |
| Aldehyde C–H, two weak bands 2820/2720 | Alkane C–H, 2850–2960, strong | |
| Ester C=O 1735–1750 with strong C–O 1000–1300 | Ketone C=O 1715 without strong C–O | |
| Ring strain: smaller ring → higher C=O | Conjugation → lower C=O | |
| Intermolecular H-bond: changes on dilution | Intramolecular H-bond: unchanged on dilution | |
| Nitro: 1550 + 1350, both strong | Nitrile: single sharp band about 2250 | |
| Anhydride two C=O bands (kinetic coupling) | Fermi doublet (fundamental mixing with an overtone) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Band positions are typical textbook values.
Level 1: Foundation
- How many N–H stretching bands are expected for (a) aniline, (b) N-methylaniline, (c) N,N-dimethylaniline?
- Which carbonyl absorbs at higher wavenumber: an ester or an amide? Give the electronic reason in one line.
- A compound shows bands at 3080 and 2960 cm⁻¹. What two kinds of C–H does it contain?
Answers
- (a) two (NH₂, asymmetric and symmetric); (b) one; (c) none.
- The ester (1735–1750 against about 1650–1690). The amide nitrogen donates its lone pair into the C=O far more strongly than the ester oxygen, lowering the C=O bond order.
- sp² C–H (above 3000, alkene or arene) and sp³ C–H (below 3000, alkyl).
Level 2: Part B Style
Practice Q1. The C–H stretching band of chloroform appears at about 3020 cm⁻¹. Assuming the force constant is unchanged, the C–D band of CDCl₃ is expected near (treat the C–H oscillator as an isolated diatomic, \( m_C = 12 \), \( m_H = 1.008 \), \( m_D = 2.014 \)):
(a) 1510 cm⁻¹ (b) 2135 cm⁻¹ (c) 2220 cm⁻¹ (d) 2470 cm⁻¹
Answer: (c)
\( \mu(\text{C–H}) = 12 \times 1.008/13.008 = 0.930 \); \( \mu(\text{C–D}) = 12 \times 2.014/14.014 = 1.725 \). Ratio \( = \sqrt{0.930/1.725} = 0.734 \). \( 3020 \times 0.734 = 2217 \approx 2220 \) cm⁻¹. (b) uses \( 1/\sqrt{2} \) (= 0.707): that is the reduced-mass trap.
Practice Q2. Arrange the C=O stretching wavenumbers in decreasing order: (I) acetyl chloride, (II) N,N-dimethylacetamide, (III) ethyl acetate, (IV) acetone.
(a) I > III > IV > II (b) III > I > IV > II (c) I > IV > III > II (d) II > IV > III > I
Answer: (a)
Acid chloride about 1800 > ester about 1740 > ketone about 1715 > amide about 1650. Strong –I with little resonance (Cl) raises the band; strong +R (NMe₂) lowers it.
Practice Q3. Which compound is expected to show the highest C=O stretching wavenumber?
(a) cyclohexanone (b) cyclopentanone (c) cyclobutanone (d) cyclohex-2-en-1-one
Answer: (c)
Ring strain raises the C=O frequency: cyclobutanone about 1780 > cyclopentanone about 1745 > cyclohexanone about 1715. The conjugated enone (d) is lowest, about 1675–1685.
Practice Q4. A compound C₈H₈O shows strong IR bands at 3060, 2925 and 1686 cm⁻¹ and no absorption at 2720 cm⁻¹ or above 3100 cm⁻¹. The most likely structure is:
(a) phenylacetaldehyde (b) acetophenone (c) 4-methylbenzaldehyde (d) 2-phenyloxirane
Answer: (b)
DBE = 8 − 8/2 + 1 = 5 (ring + three C=C + C=O). The C=O at 1686 cm⁻¹ is a conjugated (aryl) ketone. Both aldehydes (a, c) would show the 2720/2820 Fermi doublet, and phenylacetaldehyde (non-conjugated CHO) would absorb near 1725. The epoxide (d) has no C=O.
Level 3: Part C Style
Practice Q5. The C=O stretch of a saturated ketone (taken as an isolated ¹²C=¹⁶O oscillator) appears at 1715 cm⁻¹. Use \( c = 2.998 \times 10^{10} \) cm s⁻¹, \( 1 \) u \( = 1.6605 \times 10^{-27} \) kg, \( m(^{16}\text{O}) = 15.995 \) u, \( m(^{13}\text{C}) = 13.003 \) u. Which pair is correct for the C=O force constant and the band of the ¹³C=O isotopologue?
(a) about 1190 N m⁻¹; about 1677 cm⁻¹ (b) about 1190 N m⁻¹; about 1650 cm⁻¹ (c) about 595 N m⁻¹; about 1677 cm⁻¹ (d) about 2380 N m⁻¹; about 1700 cm⁻¹
Answer: (a)
Step 1, reduced mass. \( \mu = 12 \times 15.995/27.995 = 6.856 \) u \( = 1.1385 \times 10^{-26} \) kg.
Step 2, force constant. \( k = (2\pi c \tilde{\nu})^2 \mu = (2\pi \times 2.998 \times 10^{10} \times 1715)^2 \times 1.1385 \times 10^{-26} \approx 1.19 \times 10^{3} \) N m⁻¹.
Step 3, isotope shift. \( \mu(^{13}\text{C}=\text{O}) = 13.003 \times 15.995/28.998 = 7.172 \) u. \( \tilde{\nu}' = 1715 \sqrt{6.856/7.172} = 1715 \times 0.9777 \approx 1677 \) cm⁻¹.
(c) and (d) are half and double the correct force constant; (b) over-estimates the isotope shift (it scales as \( \mu^{-1/2} \), only about 2 per cent here).
Practice Q6. Two isomeric compounds P and Q, C₆H₅NO₃, are both nitrophenols. In dilute CCl₄ solution, the O–H band of P stays at about 3200 cm⁻¹ and is broad at every concentration; the O–H band of Q moves from a broad band near 3330 cm⁻¹ (concentrated) to a sharp band near 3590 cm⁻¹ (dilute). Consider:
- P is o-nitrophenol.
- Q shows only intramolecular hydrogen bonding.
- P is expected to be more volatile (steam-distillable) than Q.
- Both compounds show strong bands near 1530 and 1350 cm⁻¹.
The correct statements are:
(a) 1 and 2 only (b) 1, 3 and 4 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (b)
- Correct. A concentration-independent, low O–H band means an intramolecular H-bond: only the ortho isomer can chelate O–H···O–N.
- Wrong. Q’s band responds to dilution, so its H-bonds are intermolecular (Q is m- or p-nitrophenol).
- Correct. With its OH tied up internally, o-nitrophenol has weaker intermolecular forces and is steam-volatile.
- Correct. Both contain NO₂: asymmetric and symmetric stretches near 1530 and 1350 cm⁻¹ (aromatic nitro groups sit slightly below the aliphatic 1550).
Practice Q7. An unknown, C₄H₆O₂, shows a strong IR band at 1770 cm⁻¹, strong bands at 1170 and 1040 cm⁻¹, and C–H bands only between 2880 and 2990 cm⁻¹. There is no band at 1600–1680 cm⁻¹ and nothing above 3000 cm⁻¹. Which structure fits?
(a) methyl acrylate (b) vinyl acetate (c) γ-butyrolactone (d) but-2-enoic acid
Answer: (c)
DBE = 4 − 6/2 + 1 = 2: the C=O plus one more ring or π bond.
- No C=C stretch (1600–1680) and no =C–H above 3000: the second unsaturation is a ring. This removes (a), (b) and (d), all of which contain C=C.
- No broad O–H: not an acid (also removes d).
- 1770 cm⁻¹ with strong C–O bands is a five-membered lactone (ester raised by ring strain from about 1740 to about 1770). Vinyl acetate is a good distractor because its C=O is also high (enol esters absorb near 1760), but it would show C=C near 1650 and =C–H above 3000.
Quick Revision Table
| Idea | Fact |
|---|---|
| Oscillator | \( \tilde{\nu} = \frac{1}{2\pi c}\sqrt{k/\mu} \); stronger bond higher, heavier atoms lower |
| Isotope | C–D ≈ 0.734 × C–H; O–D ≈ 0.728 × O–H |
| C–H | sp³ 2850–2960; sp² 3000–3100; sp about 3300; CHO 2820/2720 |
| O–H | free 3600–3650 sharp; H-bonded 3200–3550 broad; acid 2500–3300 very broad |
| N–H | NH₂ two bands, NH one, N none |
| Triple bonds | C≡N 2210–2260; C≡C 2100–2260 (weak or absent if symmetric) |
| C=O order | COCl 1800 > anhydride 1820/1760 > ester 1740 > CHO 1725 > ketone 1715 > acid 1710 > amide 1650–1690 |
| Conjugation | lowers C=O by about 20–40 cm⁻¹ |
| Ring strain | 6 → 5 → 4 ring: 1715 → 1745 → 1780 (ketones); lactones 1740 → 1770 → 1840 |
| H-bond | lowers X–H and C=O; dilution test separates inter (changes) and intra (unchanged) |
| Nitro | 1550 and 1350 |
| Alkene oop | vinyl 990 + 910; 1,1- 890; trans 965; cis about 700 |
| Benzene oop | mono 750 + 700; ortho 750; meta 780 + 700 (+ 880); para 830 |
Key Takeaways
What’s Next
- UV-Visible Spectroscopy and the Woodward–Fieser Rules: conjugated chromophores and how to predict \( \lambda_{\max} \).
- The inorganic counterpart, with metal carbonyl and ligand bands: IR and Raman Spectroscopy of Inorganic Compounds.
- Back to the Structure Determination by Spectroscopy overview.