Coal: Origin, Rank, Petrography and Indian Resources
CSIR NET Earth Sciences Part C: peat and coalification, coal rank, proximate analysis, lithotypes and macerals, and India's Gondwana and Tertiary coalfields.
- 22 min
On this page · 15 sections
Prerequisites
- Kerogen types and vitrinite reflectance, which coal petrology shares with petroleum geology: Petroleum: Origin, Migration, Traps, Exploration and Indian Basins.
- The Part B outline of coal ranks and India’s coalfields: Energy Resources and Environmental Impact.
- Depositional environments (fluvial, deltaic, lacustrine) in which mires form: Facies, Environments, Basins and Diagenesis.
- The Gondwana succession and its Glossopteris flora: Phanerozoic Stratigraphy of India.
The Hook: A Leaf in the Coal
From Plants to Peat
Coal is a combustible sedimentary rock containing more than 50% by weight (and more than 70% by volume) of carbonaceous material, formed from compacted and altered plant remains. The first stage is peat, which forms only where plant production outpaces decay.
Conditions for peat accumulation
| Requirement | Why |
|---|---|
| Abundant plant growth | warm or temperate humid climate; high productivity |
| Waterlogging | a high water table keeps the litter anoxic, which stops aerobic fungal and bacterial decay |
| Slow, steady subsidence | accommodation must keep pace with peat growth; too fast drowns the mire, too slow lets it dry and oxidise |
| Little clastic input | rivers carrying mud dilute the peat and raise the ash; the best seams form away from active channels |
| Acidic water | low pH (humic acids) inhibits bacteria |
The environments are mires: swamps (forested), marshes (herbaceous), fens (fed by groundwater, less acidic) and raised bogs (fed only by rain, very acidic, low ash). Coal basins are commonly grouped as paralic (near the sea: deltas, coastal plains; marine bands within the sequence, often higher sulfur) and limnic (inland: intermontane or intracratonic basins with lakes and rivers, no marine influence). The Indian Gondwana basins are limnic.
Autochthonous and allochthonous coal
| Type | Evidence | Example |
|---|---|---|
| In situ (autochthonous) | rooted seat-earth (underclay, fireclay or ganister) below the seam; upright stumps; lateral continuity; low ash | most Carboniferous coals of Europe and North America |
| Drift (allochthonous) | no seat-earth; transported plant debris; high and variable ash; sharp contacts; graded or laminated texture | some lacustrine and deltaic coals |
How much peat makes a seam?
Peat loses most of its water and much of its volume on burial. Commonly quoted peat-to-coal compaction ratios range from a few to about ten for bituminous coal, and they vary with the peat type and rank. With a ratio of 10:1 and a peat accumulation rate of 1 mm per year (both assumptions for the arithmetic), a 3 m bituminous seam needs 30 m of peat and about 30,000 years of uninterrupted mire growth. This is why thick seams imply long-lived, stable mires and why seam splitting records interruptions by river sediment.
Coalification
Coalification is the conversion of peat through lignite and bituminous coal to anthracite. It has two stages:
- Biochemical stage (peatification and early diagenesis): bacterial and fungal decay, humification, formation of humic acids; ends at about the lignite stage.
- Geochemical (thermal) stage: after burial, temperature and time drive loss of water, \( \text{CO}_2 \), then methane and other volatiles; aromatic carbon structures grow and become ordered.
graph LR
P[Peat] --> L[Lignite / brown coal]
L --> SB[Sub-bituminous]
SB --> HV[High-volatile bituminous]
HV --> MV[Medium-volatile bituminous]
MV --> LV[Low-volatile bituminous]
LV --> SA[Semi-anthracite]
SA --> A[Anthracite]
A --> MA[Meta-anthracite]
MA --> G[Graphite]What drives it
| Factor | Effect |
|---|---|
| Temperature | the main control; coalification reactions are thermally activated |
| Time | longer heating gives higher rank at the same temperature; old coals can reach a given rank at lower temperature |
| Pressure | lithostatic pressure compacts and expels water at low rank, but does not drive the chemical changes; tectonic stress gives anisotropy (bireflectance) of vitrinite |
| Igneous intrusions | local contact metamorphism; coal next to dykes and sills becomes natural coke. In the Damodar valley coalfields, heat-affected coal near intrusions is called jhama |
Hilt’s law: in a given area, coal rank increases with depth, so volatile matter decreases downwards in a vertical sequence of seams. It is the coal-field expression of the geothermal gradient. Departures from it point to intrusions, unusual heat flow or later tectonic uplift and burial.
Coal Rank
Rank is the degree of coalification. It is distinct from type (what plant material and macerals the coal is made of) and grade (how much mineral matter it contains). A high-ash coal can be high rank; a clean coal can be low rank.
Rank parameters and how they change
| Property | Trend as rank increases |
|---|---|
| Carbon (daf) | rises, from about 50–60% in peat to above 90% in anthracite |
| Oxygen | falls steadily |
| Hydrogen | roughly constant through bituminous, then falls in anthracite |
| Moisture (bed or inherent) | falls sharply in the low ranks |
| Volatile matter (dmmf) | falls, especially through the bituminous ranks |
| Calorific value | rises to a maximum in the low-to-medium volatile bituminous range, then levels off or falls slightly in anthracite |
| Vitrinite reflectance \( R_o \) | rises continuously; the most widely used single rank parameter |
| Liptinite fluorescence | strong at low rank, lost by about the medium-volatile bituminous stage |
| Coking (caking) property | absent in lignite, best in medium-volatile bituminous, absent in anthracite |
Different parameters work best in different rank ranges: moisture and calorific value for low-rank coals, volatile matter for bituminous coals and reflectance across the whole range, especially at high rank where volatile matter changes little.
Rank classification
The ASTM scheme (D388) uses fixed carbon and volatile matter (dry, mineral-matter-free) for higher ranks and calorific value (moist, mineral-matter-free) for lower ranks. Approximate reflectance values are added for orientation.
| Rank | Fixed carbon, dmmf (%) | Volatile matter, dmmf (%) | Classified by | \( R_o \) (about, %) |
|---|---|---|---|---|
| Lignite | — | — | calorific value (lowest) | below about 0.4 |
| Sub-bituminous | — | — | calorific value | about 0.4–0.6 |
| High-volatile bituminous | below 69 | above 31 | calorific value | about 0.5–1.1 |
| Medium-volatile bituminous | 69–78 | 22–31 | fixed carbon | about 1.1–1.5 |
| Low-volatile bituminous | 78–86 | 14–22 | fixed carbon | about 1.5–2.0 |
| Semi-anthracite | 86–92 | 8–14 | fixed carbon | about 2.0–2.5 |
| Anthracite | 92–98 | 2–8 | fixed carbon | above about 2.5 |
| Meta-anthracite | above 98 | below 2 | fixed carbon | higher |
Reflectance boundaries differ slightly between schemes; treat them as approximate. Peat is not a coal rank in the ASTM scheme, and “brown coal” is the European term for lignite and the softer sub-bituminous coals.
Coal Analysis
Proximate and ultimate analysis
| Analysis | Measures | Notes |
|---|---|---|
| Proximate | moisture (M), volatile matter (VM), ash (A), fixed carbon (FC) | FC is by difference: \( \text{FC} = 100 - (\text{M} + \text{VM} + \text{A}) \) |
| Ultimate | C, H, N, S, O | O usually by difference |
| Calorific value | gross (higher) and net (lower) heating value | bomb calorimeter |
| Coking tests | free swelling index (FSI), Gray–King, plastometry, dilatometry | needed for metallurgical coal |
Ash is the inorganic residue after combustion; mineral matter is what was present before combustion (clays, quartz, carbonates, pyrite). Mineral matter is larger than ash, because clays lose water and carbonates lose \( \text{CO}_2 \) and pyrite changes to oxide on burning.
Reporting bases
| Basis | Excludes | Conversion from air-dried (ad) |
|---|---|---|
| Dry (db) | moisture | \( X_{db} = X_{ad}\,\dfrac{100}{100 - \text{M}} \) |
| Dry, ash-free (daf) | moisture and ash | \( X_{daf} = X_{ad}\,\dfrac{100}{100 - \text{M} - \text{A}} \) |
| Dry, mineral-matter-free (dmmf) | moisture and mineral matter | \( X_{dmmf} = X_{ad}\,\dfrac{100}{100 - \text{M} - \text{MM}} \) |
Mineral matter is estimated with the Parr formula, \( \text{MM} = 1.08\,\text{A} + 0.55\,\text{S} \), and the ASTM rank calculation corrects fixed carbon for sulfur:
$$\boxed{\text{FC}_{dmmf} = \frac{\text{FC} - 0.15\,\text{S}}{100 - (\text{M} + 1.08\,\text{A} + 0.55\,\text{S})}\times 100}$$Calorific value from the ultimate analysis
A Dulong-type formula estimates the gross calorific value from mass fractions of C, H, O and S:
$$\text{GCV (MJ kg}^{-1}) \approx 33.8\,C + 144\left(H - \frac{O}{8}\right) + 9.4\,S$$The term \( O/8 \) treats oxygen as already bound to hydrogen as water. For C = 0.80, H = 0.05, O = 0.08, S = 0.01 it gives about 32.9 MJ kg\(^{-1}\), typical of a bituminous coal. The formula works for bituminous coals and is less reliable for lignite.
Indian grading
India has graded non-coking coal by Useful Heat Value, computed from ash and moisture (both determined at 60% relative humidity and 40 °C):
$$\text{UHV (kcal kg}^{-1}) = 8900 - 138\,(\text{A} + \text{M})$$The UHV scheme was replaced for non-coking coal by grading on gross calorific value in bands of 300 kcal kg\(^{-1}\) (grades G1 to G17). Coking coal is graded mainly by its ash content. The formula shows the cost of ash: every 1% of ash plus moisture removes 138 kcal kg\(^{-1}\) of useful heat.
Coal Petrography
Lithotypes (megascopic)
Marie Stopes (1919) named four lithotypes of humic banded coal, recognised in hand specimen:
| Lithotype | Appearance | Dominant maceral group |
|---|---|---|
| Vitrain | bright, glassy, black bands a few millimetres thick; conchoidal fracture; well cleated | vitrinite |
| Clarain | semi-bright, finely laminated with silky lustre | vitrinite with liptinite and inertinite |
| Durain | dull, grey-black, hard, granular; uneven fracture | inertinite and liptinite |
| Fusain | soft, friable, fibrous, charcoal-like; soils the fingers | inertinite (fusinite) |
Humic coals are banded and formed from woody peat. Sapropelic coals are unbanded, fine-grained and formed from organic mud in open water: cannel coal (rich in spores, burns with a bright candle-like flame) and boghead coal or torbanite (rich in algae such as Botryococcus). Sapropelic coals are hydrogen-rich, oil-prone and link coal to oil shale.
Macerals (microscopic)
Macerals are the microscopically recognisable organic constituents of coal, the equivalent of minerals in a rock. They are studied in polished blocks under reflected light in oil, and in blue or ultraviolet light for fluorescence. The ICCP (International Committee for Coal and Organic Petrology) groups them into three groups:
| Group | Origin | Reflectance | Fluorescence | H content | Main macerals |
|---|---|---|---|---|---|
| Vitrinite (huminite in low-rank coal) | humified woody and cortical tissue (lignin, cellulose) | intermediate; the reference for rank | weak or none | intermediate | telinite (cell structure), collinite (structureless; in the newer scheme telovitrinite, detrovitrinite, gelovitrinite) |
| Liptinite (exinite) | hydrogen-rich plant parts: spores, cuticles, resins, waxes, algae, cork | lowest | strong at low rank | highest | sporinite, cutinite, resinite, alginite, suberinite, bituminite, exsudatinite |
| Inertinite | charred (fire) or oxidised, fungally attacked plant matter | highest | none | lowest | fusinite, semifusinite, macrinite, micrinite, funginite (formerly sclerotinite), inertodetrinite, secretinite |
Behaviour on heating separates them into reactives (vitrinite, liptinite and part of the semifusinite), which soften and fuse in a coke oven, and inerts (most inertinite and mineral matter), which do not.
Reflectance of the three groups converges with rank: liptinite brightens fastest, and by the medium- to low-volatile bituminous stage it can no longer be told apart from vitrinite in reflected light.
Microlithotypes
Microlithotypes are maceral associations in bands at least 50 µm wide:
| Class | Macerals | Examples |
|---|---|---|
| Monomaceral | one group dominant | vitrite, liptite, inertite |
| Bimaceral | two groups | clarite (V + L), durite (I + L), vitrinertite (V + I) |
| Trimaceral | all three | duroclarite, clarodurite, vitrinertoliptite |
The hand-specimen lithotypes are built of microlithotypes: vitrain is mostly vitrite; clarain is rich in clarite; durain is rich in durite.
What coal petrography is used for
| Use | How |
|---|---|
| Rank | mean random vitrinite reflectance in oil, at a wavelength of 546 nm |
| Coking blend design | rank (\( R_o \)) plus the reactive : inert ratio predicts coke strength |
| Thermal maturity of sedimentary basins | vitrinite reflectance of dispersed organic matter (the same measurement as in Petroleum) |
| Depositional environment | gelification of tissue (vitrinite) needs wet conditions; inertinite needs fire or oxidation in a drier, fluctuating mire. Ratios such as a gelification index (vitrinite-type over inertinite-type macerals) and a tissue preservation index (structured over unstructured tissue) are used, in several variants |
| Hydrocarbon potential | liptinite content and fluorescence indicate oil-proneness |
Indian Coal Resources
India’s coal resources are estimated and updated each year by the Geological Survey of India (GSI) and grouped as proved, indicated and inferred. Roughly 99% of the resource is in Gondwana basins; the rest is Tertiary coal in the North-East. Lignite is accounted separately. Odisha, Jharkhand and Chhattisgarh hold the largest shares of the coal resource; Tamil Nadu holds the largest share of the lignite.
Gondwana coal
The Gondwana basins are intracratonic rift basins (half-grabens) aligned along old Precambrian structural trends. They were filled from the Late Carboniferous to the Early Cretaceous; the coal is mostly Permian.
| Unit (Lower Gondwana, Damodar valley) | Character |
|---|---|
| Talchir Formation | glacial tillites, varved shales and boulder beds at the base: the Late Palaeozoic Gondwana glaciation |
| Karharbari Formation | coarse sandstones with coal; the Giridih coalfield’s Karharbari seams are of high quality |
| Barakar Formation | sandstone–shale–coal cycles; the most important coal-bearing unit in India |
| Barren Measures (Ironstone Shale in Raniganj) | shales with ironstone bands; little coal |
| Raniganj Formation | the second main coal-bearing unit, Late Permian |
| Panchet Formation (Early Triassic) and younger | red beds; no significant coal |
The Talchir, Karharbari, Barakar, Barren Measures and Raniganj units carry the Glossopteris–Gangamopteris flora above the glacial beds; the stratigraphy is treated in more detail in Phanerozoic Stratigraphy of India.
| Valley / basin | Major coalfields | State(s) | Notes |
|---|---|---|---|
| Damodar–Koel | Raniganj, Jharia, East and West Bokaro, North and South Karanpura, Giridih, Ramgarh | West Bengal, Jharkhand | Jharia is India’s main source of prime coking coal (Barakar seams); long-burning mine fires; Raniganj is the oldest worked Indian coalfield |
| Rajmahal | Rajmahal hills coalfields | Jharkhand | Lower Gondwana coal below the Early Cretaceous Rajmahal Traps |
| Son–Mahanadi | Singrauli, Sohagpur, Korba, Mand–Raigarh, Hasdeo–Arand | Madhya Pradesh, Uttar Pradesh, Chhattisgarh | large thick seams; opencast mining for power |
| Talcher, Ib valley | Odisha | large reserves of high-ash non-coking coal | |
| Pranhita–Godavari | Singareni (Godavari valley) and others | Telangana, Andhra Pradesh | |
| Wardha valley | Wardha, Kamptee | Maharashtra | |
| Satpura | Pench–Kanhan, Pathakhera | Madhya Pradesh |
Character: high ash (commonly 25–45% in run-of-mine coal), much of it as finely disseminated mineral matter that is difficult to wash out; low sulfur (generally below 1%); inertinite-rich; mostly high-volatile bituminous and sub-bituminous rank, with medium-volatile coking coals in Jharia and parts of other Damodar coalfields.
Tertiary coal
| Region | Examples | Character |
|---|---|---|
| Assam | Makum coalfield (Ledo, Tikak, Tipong), Dilli–Jeypore | Paleogene (Oligocene coals in the Barail Group) |
| Meghalaya | Garo, Khasi and Jaintia hills | Paleogene |
| Arunachal Pradesh, Nagaland | Namchik–Namphuk and others | Paleogene |
Tertiary coals are low in ash but high in sulfur (often several per cent, much of it organic sulfur), vitrinite-rich, high-volatile and strongly caking but with poor coke strength. The high sulfur is usually linked to marine influence on the peat (paralic setting).
Lignite
| Area | State | Age (broad) |
|---|---|---|
| Neyveli | Tamil Nadu | Tertiary (Neogene) |
| Barmer, Bikaner (Palana), Nagaur | Rajasthan | Paleogene |
| Kutch (Panandhro), Bharuch, Bhavnagar | Gujarat | Paleogene–Neogene |
| Minor occurrences | Jammu and Kashmir, Kerala, Puducherry | Tertiary |
Lignite has high moisture and low calorific value and is used mainly in pithead power stations.
| Feature | Gondwana coal | Tertiary coal | Lignite |
|---|---|---|---|
| Age | mainly Permian | Paleogene | Paleogene–Neogene |
| Setting | intracratonic rifts, limnic | foreland of the North-East, paralic influence | coastal and western basins |
| Ash | high | low | variable |
| Sulfur | low | high | variable, often moderate to high |
| Dominant maceral | inertinite-rich | vitrinite-rich | huminite |
| Share of resource | about 99% of coal | under 1% of coal | counted separately |
Memory Tricks
Don’t Confuse
| This | Not this |
|---|---|
| Rank: degree of coalification | Type: maceral composition; grade: amount of mineral matter |
| Ash: combustion residue | Mineral matter: inorganic material before combustion (about 1.1 × ash) |
| Vitrain: a megascopic lithotype | Vitrinite: a microscopic maceral group; vitrite: a microlithotype |
| Fusain: charcoal-like lithotype | Fusinite: the maceral that makes it up |
| Cannel coal: spores, sapropelic | Boghead coal: algae, sapropelic |
| Humic coal: banded, woody peat | Sapropelic coal: unbanded, organic mud |
| Hilt’s law: rank increases with depth | Gussow’s principle: differential entrapment of oil and gas |
| Jharia: prime coking coal, Damodar valley | Neyveli: lignite, Tamil Nadu |
| Barakar: main coal formation, Early Permian | Talchir: glacial basal unit, no economic coal |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which maceral group has the highest hydrogen content?
- Which Lower Gondwana formation is the main coal-bearing unit of India?
- State Hilt’s law in one line.
Answers
- Liptinite (exinite).
- The Barakar Formation (Early Permian).
- In a given area, coal rank increases with depth (volatile matter decreases downwards).
Level 2: Part B Style
Practice Q1. A dull, hard, grey-black coal band with a granular fracture, made mostly of inertinite and liptinite, is:
(a) vitrain (b) clarain (c) durain (d) fusain
Answer: (c) durain
Durain is the dull, hard lithotype built of durite (inertinite + liptinite). Fusain is also inertinite-rich but is soft, fibrous and friable; vitrain is bright.
Practice Q2. A coal has, air-dried: moisture 6%, ash 30%, volatile matter 25%. Its fixed carbon on the dry, ash-free basis is closest to:
(a) 39% (b) 49% (c) 61% (d) 64%
Answer: (c) 61%
FC (ad) \( = 100 - 6 - 30 - 25 = 39\% \). daf: \( 39\times 100/(100 - 6 - 30) = 39/0.64 = 60.9\% \). Option (a) is the air-dried value; option (d) is close to the Parr dmmf value, which uses mineral matter (larger than ash) and a sulfur correction.
Practice Q3. Using \( \text{UHV} = 8900 - 138(\text{A} + \text{M}) \), the useful heat value of a coal with 32% ash and 7% moisture is:
(a) 3,518 kcal kg\(^{-1}\) (b) 4,484 kcal kg\(^{-1}\) (c) 5,382 kcal kg\(^{-1}\) (d) 8,861 kcal kg\(^{-1}\)
Answer: (a) 3,518 kcal per kg
\( 8900 - 138\times 39 = 8900 - 5382 = 3518 \) kcal kg\(^{-1}\). Option (c) is the deduction, not the result; option (d) subtracts only 39.
Practice Q4. Which pairing is incorrect?
(a) Jharia – prime coking coal (b) Makum – Tertiary coal, Assam (c) Neyveli – Permian bituminous coal (d) Talcher – Gondwana non-coking coal, Odisha
Answer: (c)
Neyveli in Tamil Nadu is a Tertiary lignite field. The other pairings are correct.
Level 3: Part C Style
Practice Q5. Vitrinite reflectance and volatile matter for seams in one borehole:
| Seam depth (m) | \( R_o \) (%) | VM, dmmf (%) |
|---|---|---|
| 300 | 0.62 | 38 |
| 600 | 0.80 | 34 |
| 900 | 1.85 | 18 |
| 1,200 | 1.15 | 29 |
Which interpretation is best?
(a) The profile obeys Hilt’s law throughout; the 900 m seam is simply deeper. (b) The 900 m seam is anomalously high in rank, most likely because of local heating by an igneous intrusion; the other seams follow Hilt’s law. (c) The 1,200 m seam has been oxidised, lowering its reflectance. (d) Reflectance and volatile matter disagree, so the data are unreliable.
Answer: (b)
Reflectance rises and volatile matter falls with depth for 300, 600 and 1,200 m (high-volatile to medium-volatile bituminous): Hilt’s law. The 900 m seam is out of sequence: \( R_o = 1.85\% \) and VM = 18% make it low-volatile bituminous, higher in rank than the deeper seam. A local heat source such as a sill or dyke (the jhama situation in the Damodar coalfields) explains a single anomalous seam. Option (c) cannot be right because oxidation would not explain the high rank of the shallower seam, and reflectance and VM agree with each other in every row, so (d) is wrong.
Practice Q6. A coal block covers 2.0 km × 1.5 km with an average seam thickness of 8 m and an in situ density of 1.5 t m\(^{-3}\). If 60% of it can be mined, and the seam formed from peat with an assumed compaction ratio of 10:1 accumulating at 1 mm yr\(^{-1}\), which pair of values is correct?
(a) 21.6 Mt mineable; 80,000 years of peat accumulation (b) 36 Mt mineable; 8,000 years (c) 21.6 Mt mineable; 8,000 years (d) 14.4 Mt mineable; 80,000 years
Answer: (a)
In place: \( 2000\times 1500\times 8 = 2.4\times 10^{7} \) m³; \( \times 1.5 = 3.6\times 10^{7} \) t = 36 Mt. Mineable: \( 0.6\times 36 = 21.6 \) Mt.
Peat: \( 8\times 10 = 80 \) m; at 1 mm yr\(^{-1}\) = 0.001 m yr\(^{-1}\): \( 80/0.001 = 80{,}000 \) years. Option (b) gives the in-place tonnage and forgets the compaction; (d) takes 40% instead of 60%.
Practice Q7. Consider these statements about coal petrography:
- Fusinite has higher reflectance than vitrinite in the same coal.
- Liptinite fluorescence increases steadily from lignite to anthracite.
- Sapropelic coals such as boghead are richer in hydrogen than humic coals of the same rank.
- A high gelification of plant tissue (high vitrinite) suggests a persistently wet mire.
Which are correct?
(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 3 and 4 only
- 1 true: inertinite macerals have the highest reflectance at a given rank.
- 2 false: liptinite fluorescence is strong at low rank and is lost by about the medium-volatile bituminous stage.
- 3 true: boghead (algal) and cannel (spore) coals are liptinite-rich, so hydrogen-rich and oil-prone.
- 4 true: gelification of humic tissue needs waterlogged, anoxic conditions; inertinite indicates fire or oxidation in drier conditions.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Peat conditions | high productivity, waterlogged anoxic mire, balanced subsidence, little clastic input |
| Basins | paralic (coastal, marine bands, higher S) vs limnic (inland; Indian Gondwana) |
| Origin | in situ (seat-earth, stumps) vs drift (no seat-earth, high ash) |
| Rank sequence | peat → lignite → sub-bituminous → bituminous (hv, mv, lv) → semi-anthracite → anthracite → meta-anthracite |
| Controls | temperature and time; Hilt’s law; intrusions give natural coke (jhama) |
| ASTM boundaries | VM dmmf 31 / 22 / 14 / 8 / 2; FC dmmf 69 / 78 / 86 / 92 / 98 |
| Rank parameters | moisture and CV (low rank), VM (bituminous), \( R_o \) (all, especially high rank) |
| Bases | db \( \times 100/(100 - \text{M}) \); daf \( \times 100/(100 - \text{M} - \text{A}) \); Parr MM \( = 1.08\text{A} + 0.55\text{S} \) |
| UHV | \( 8900 - 138(\text{A} + \text{M}) \) kcal kg\(^{-1}\); now GCV grades G1–G17 |
| Lithotypes | vitrain, clarain, durain, fusain (Stopes 1919); cannel and boghead are sapropelic |
| Maceral groups | vitrinite (huminite), liptinite (exinite), inertinite |
| Microlithotypes | bands at least 50 µm; vitrite, clarite, durite, vitrinertite, trimacerites |
| Gondwana coal | Permian; Barakar and Raniganj formations; high ash, low S, inertinite-rich; about 99% of resource |
| Coalfields | Damodar (Raniganj, Jharia, Bokaro, Karanpura, Giridih); Son–Mahanadi (Singrauli, Korba, Talcher, Ib); Godavari (Singareni) |
| Tertiary coal | Makum (Assam), Meghalaya; low ash, high S |
| Lignite | Neyveli (TN), Barmer–Bikaner (Rajasthan), Kutch (Gujarat) |
Key Takeaways
What’s Next
- Gas Hydrates, Coal-Bed Methane, Nuclear and Non-Conventional Energy: the methane stored in coal seams, and the energy resources beyond coal and oil.
- Petroleum: Origin, Migration, Traps, Exploration and Indian Basins: revisit kerogen type III and vitrinite reflectance in the petroleum context.
- Economic Geology: Quick Revision.