Skip to content

Economic Geology Short Notes

One-page CSIR NET Earth Sciences Part C revision: ore deposits, fluid inclusions, isotopes, metal deposits, petroleum, coal, gas hydrates, CBM and uranium.

  • 7 min read
  • Updated
On this page · 8 sections
  1. Part C in one table
  2. Ore-forming processes and metallogeny
  3. Ore microscopy, fluid inclusions, isotopes
  4. Ferrous, base and noble metals
  5. Petroleum
  6. Coal
  7. Gas hydrates, CBM, nuclear and non-conventional energy
  8. Last-minute checklist

Every number, formula and trap from Ore-Forming Processes and Metallogeny, Ore Microscopy, Fluid Inclusions and Isotopes, Ferrous, Base and Noble Metal Deposits, Petroleum, Coal and Gas Hydrates, CBM, Nuclear and Non-Conventional Energy, on one page.

Part C in one table

Per the NTA information bulletin for December 2026, Earth Sciences (702):

PartGivenAttemptCorrectWrongMaximum
C8025+4−1.32100

Only the first 25 answered Part C questions are evaluated. Overview of the unit: Economic Geology.

Ore-forming processes and metallogeny

$$\boxed{\text{Concentration factor} = \frac{\text{ore grade}}{\text{crustal abundance}}} \qquad \boxed{C_{\text{sul}} = \frac{C_L\,D\,(R+1)}{R + D}}$$
Process familyDeposits
Magmaticchromite (crystal accumulation), Ni–Cu–PGE (sulfide immiscibility), pegmatite, carbonatite, kimberlite
Hydrothermalporphyry, epithermal, skarn, VMS, SEDEX, MVT, orogenic gold
SedimentaryBIF, Mn, phosphorite, evaporites; placers
Weatheringlaterite and bauxite (residual), supergene enrichment
  • Transport: base metals as chloride complexes; gold as \( \text{Au(HS)}_2^- \).
  • Precipitation: cooling, boiling, mixing, wall-rock reaction, pressure drop.
  • Porphyry alteration: potassic → phyllic → argillic → propylitic; advanced argillic = alunite, pyrophyllite, dickite.
  • VMS: Cyprus (mafic), Besshi (mafic + pelite), Kuroko (felsic); Cu at base, Zn–Pb at top.
  • SEDEX vs MVT: laminated shale-hosted, syngenetic vs carbonate-hosted, epigenetic, 75–200 °C brines.
  • BIF: Algoma (Archean, volcanic), Superior (Paleoproterozoic, shelf), Rapitan (Neoproterozoic, glacial).
  • Supergene profile: gossan → leached oxide zone → water table → chalcocite blanket → hypogene.
  • Metallogeny: provinces, epochs and belts tied to plate setting, secular change and preservation.

Ore microscopy, fluid inclusions, isotopes

$$\boxed{R = \frac{(n - N)^2 + k^2}{(n + N)^2 + k^2}} \qquad \boxed{\text{wt\% NaCl eq} = 1.78\theta - 0.0442\theta^2 + 0.000557\theta^3}$$$$\boxed{\delta = \left(\frac{R_{\text{sample}}}{R_{\text{std}}} - 1\right)\times 1000} \qquad \boxed{\Delta_{A-B} \approx 1000\ln\alpha_{A-B} = \frac{A\times 10^6}{T^2} + B}$$
FactValue
Brightnesspyrite > chalcopyrite > galena > pyrrhotite > hematite > magnetite > sphalerite
Eutectic NaCl–H₂O−21.2 °C
\( \text{CO}_2 \) melting−56.6 °C
Roedder’s rulessingle phase trapped; constant volume; closed system
BoilingL-rich and V-rich inclusions, same \( T_h \), opposite modes; \( T_h \) = trapping T
Sulfide equilibrium orderpyrite > sphalerite > chalcopyrite > galena in \( \delta^{34}\text{S} \)
Water sourcesseawater 0/0; magmatic \( \delta^{18}\text{O} \) +5.5 to +10; MWL \( \delta\text{D} = 8\delta^{18}\text{O} + 10 \)
Sulfur sourcesmagmatic near 0‰; seawater sulfate about +21‰ today; bacterial reduction strongly negative
Direct datingRe–Os molybdenite; Ar–Ar sericite, adularia; U–Pb hydrothermal zircon, monazite

Ferrous, base and noble metals

MetalOre mineralsMain deposit typesIndia
Fehematite, magnetite, goethiteBIF and enriched BIF; Fe–Ti–VIron Ore Group (Jharkhand–Odisha), Bailadila, Bellary–Hospet, Goa; Kudremukh (magnetite)
Mnpyrolusite, psilomelane, braunitesedimentary, metamorphosed (gondite, kodurite)Sausar Group, Odisha, Sandur
Crchromitestratiform, podiformSukinda, Nuasahi, Nuggihalli
Cuchalcopyrite, bornite, chalcociteporphyry, VMS, sediment-hosted, IOCGSinghbhum, Khetri, Malanjkhand
Pb–Zngalena, sphaleriteSEDEX, MVT, VMSRampura-Agucha, Zawar, Rajpura-Dariba, Sindesar Khurd
Aunative gold, electrum, telluridesorogenic, palaeoplacer, epithermalKolar, Hutti, Ramagiri
PGEsperrylite, cooperite, braggitelayered-intrusion reefs, Ni–Cu by-productNuasahi, Sittampundi

Metal fraction of pure minerals: magnetite 72.4% Fe, hematite 69.9% Fe, sphalerite 67.1% Zn, galena 86.6% Pb, chalcopyrite 34.6% Cu.

Petroleum

StageTemperature (about)Products
Diagenesisbelow 60 °Ckerogen, biogenic methane
Catagenesis60–150 °Coil window 60–120 °C, then wet gas
Metagenesisabove 150 °Cdry gas
KerogenOriginProduct
Ilacustrine algaeoil
IImarine planktonoil and gas
IIIterrestrial woody plantsgas, coal
IVoxidisedinert
$$\boxed{\text{HI} = \frac{100\,S_2}{\text{TOC}}} \quad \boxed{\text{PI} = \frac{S_1}{S_1 + S_2}} \quad \boxed{h_{max} = \frac{\Delta P_c}{(\rho_w - \rho_{hc})g}}$$$$\boxed{\phi_D = \frac{\rho_{ma} - \rho_b}{\rho_{ma} - \rho_f}} \quad \boxed{S_w^{\,n} = \frac{a R_w}{\phi^m R_t}} \quad \boxed{\text{STOIIP} = \frac{A h \phi (1 - S_w)}{B_o}}$$
  • Maturity: \( R_o \) 0.6–1.3% oil; \( T_{max} \) about 435–465 °C.
  • Migration: primary (expulsion), secondary (buoyancy vs capillary), tertiary (leakage). Gussow: gas in the first trap.
  • Traps: structural, stratigraphic, combination, hydrodynamic. Seals: shale common, evaporite best.
  • Indian Category I basins: Assam Shelf, Assam–Arakan, Cambay, Mumbai Offshore, KG, Cauvery, Rajasthan. Digboi 1889; Mumbai High 1974 (carbonate reservoir); Mangala (Barmer) 2004.

Coal

Rank: peat → lignite → sub-bituminous → high-, medium-, low-volatile bituminous → semi-anthracite → anthracite → meta-anthracite.

RankVM dmmf (%)FC dmmf (%)
High-volatile bituminousabove 31below 69
Medium-volatile bituminous22–3169–78
Low-volatile bituminous14–2278–86
Semi-anthracite8–1486–92
Anthracite2–892–98
$$\boxed{X_{daf} = X_{ad}\,\frac{100}{100 - \text{M} - \text{A}}} \qquad \boxed{\text{MM} = 1.08\,\text{A} + 0.55\,\text{S}} \qquad \boxed{\text{UHV} = 8900 - 138(\text{A} + \text{M})}$$
  • Controls: temperature and time; Hilt’s law (rank rises with depth); intrusions make natural coke (jhama).
  • Lithotypes (Stopes 1919): vitrain (bright), clarain (semi-bright), durain (dull, hard), fusain (charcoal). Sapropelic: cannel (spores), boghead (algae).
  • Maceral groups: vitrinite (huminite at low rank), liptinite (highest H, lowest reflectance, fluorescent), inertinite (highest reflectance, inert).
  • Microlithotypes: bands at least 50 µm; vitrite, clarite (V + L), durite (I + L), vitrinertite (V + I).
  • India: about 99% Gondwana (Permian; Barakar and Raniganj formations; high ash, low S, inertinite-rich); Damodar (Raniganj, Jharia prime coking coal, Bokaro, Karanpura), Son–Mahanadi (Singrauli, Korba, Talcher, Ib), Godavari (Singareni). Tertiary: Makum (Assam), Meghalaya (low ash, high S). Lignite: Neyveli, Rajasthan, Gujarat.

Gas hydrates, CBM, nuclear and non-conventional energy

Hydrate structureH₂O per unit cellCagesGuests
sI462 small + 6 largemethane, \( \text{CO}_2 \)
sII13616 small + 8 largepropane, isobutane
sH343 + 2 + 1large molecules with help gas
$$\boxed{q = k\,\frac{T_{BSR} - T_0}{z_{BSR}}} \qquad \boxed{V = \frac{V_L P}{P_L + P}} \qquad \boxed{P_{cd} = \frac{V P_L}{V_L - V}}$$$$\boxed{^\circ\text{API} = \frac{141.5}{\text{SG}} - 131.5} \qquad \boxed{\eta_{max} = 1 - \frac{T_c}{T_h}}$$
  • BSR: base of the hydrate stability zone; parallel to seafloor, cuts bedding, reversed polarity; deeper BSR = lower heat flow. India: NGHP in KG, Mahanadi, Andaman.
  • CBM: mostly adsorbed gas; dewater → desorb → diffuse → Darcy flow in face and butt cleats.
  • Uranium: U⁶⁺ mobile, U⁴⁺ precipitates at redox fronts; roll fronts point down-gradient. Types: unconformity, sandstone, QPC, IOCG, vein, intrusive, metasomatite, carbonate, calcrete.
  • Indian uranium: Singhbhum Shear Zone (Jaduguda, Bhatin, Narwapahar, Turamdih); Tummalapalle (carbonate); Lambapur–Peddagattu (unconformity); Domiasiat (sandstone). Thorium: monazite placers of Kerala, Tamil Nadu, Odisha, Andhra.
  • Gamma-ray peaks: K 1.46, U (²¹⁴Bi) 1.76, Th (²⁰⁸Tl) 2.61 MeV; eU assumes secular equilibrium.
  • Fission: about 200 MeV per fission; 1 kg ²³⁵U about \( 8.2\times 10^{13} \) J. ²³⁵U was about 3.7% of natural uranium 2 billion years ago (Oklo).
  • Unconventional: shale gas and tight oil (horizontal wells, fracturing); oil shale (immature, retort); oil sands (bitumen, below 10° API); heavy oil 10–22° API.

Last-minute checklist

If the question has…Reach for…
A grade and a crustal abundanceconcentration factor
An ice-melting temperaturethe salinity polynomial with \( \theta = -T_m \)
Two coexisting sulfides\( \Delta = A\times 10^6/T^2 \), then convert K to °C
Rock-Eval S1, S2, S3 and TOCHI, OI, PI and \( T_{max} \)
Resistivities and porosityArchie
A proximate analysisconvert to daf or dmmf before judging rank
A Langmuir pair and a gas contentsaturation and critical desorption pressure
A BSR depthheat flow; deeper BSR, lower heat flow
A specific gravity of oilAPI gravity
Advertisement
Advertisement