Skip to content

Electrical and Electromagnetic Methods

CSIR NET Earth Sciences Part C geophysics: resistivity profiling and sounding, induced polarization, loop EM, VLF, AFMAG, TEM, magnetotellurics and GDS.

4
Topics
85
Min read

Chapter Overview

Electrical and Electromagnetic Methods is a unit of the Geophysics section of Part C in CSIR NET Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702). It covers every way of measuring the electrical conductivity of the subsurface: driving current through electrodes (resistivity), watching the ground discharge after the current stops (induced polarization), inducing eddy currents with coils and loops (frequency- and time-domain EM), borrowing distant radio transmitters and thunderstorms (VLF, AFMAG), and using the Earth’s natural magnetic variations to reach the mantle (magnetotellurics, geomagnetic depth sounding).

Conductivity is the property most sensitive to water, salinity, clay, metallic minerals and melt, which is why these methods dominate groundwater work in India’s hard-rock and coastal aquifers, base-metal exploration, and crustal and lithospheric studies. Questions combine short calculations (geometric factors, skin depths, apparent resistivity from field readings) with interpretation of sounding curves, profiles, pseudosections and decay curves.

What You’ll Learn

By the end of this chapter you will be able to:

  • Derive and use the geometric factors of the Wenner, Schlumberger, dipole-dipole and pole arrays, and convert field readings to apparent resistivity
  • Read two- and three-layer sounding curves (H, K, A, Q), use Dar Zarrouk parameters, and explain equivalence, suppression and anisotropy
  • Explain electrode and membrane polarization, and compute chargeability, frequency effect and metal factor
  • Use the response parameter, in-phase and quadrature components and skin depth to describe inductive EM responses
  • Compare loop methods, VLF, AFMAG and TEM by source, frequency, measured quantity and depth, and apply the Fraser filter and TEM decay laws
  • Compute MT apparent resistivity, phase and depth, recognise TE and TM modes and static shift, and read induction arrows and GDS results

Prerequisites


Learning Path

The topics follow the order of the official syllabus lines, from DC through to the lowest-frequency natural-source methods:

graph TD
    A["1. Resistivity Profiling
and Sounding (DC)"] --> B["2. Induced Polarization
(same arrays, time and frequency)"] A --> C["3. EM Methods: Loop, VLF,
AFMAG and TEM (induction)"] B --> C C --> D["4. Magnetotellurics and
Geomagnetic Depth Sounding"] D --> E["Quick Revision"]

Topics in This Chapter

TopicWhat it coversTime
Resistivity Profiling and Soundingconduction in rocks, Archie’s law, anisotropy, point-source potential, geometric factors, depth of current flow, profiling vs sounding, ERT, two-layer image series, H/K/A/Q curves, Dar Zarrouk S and T, equivalence, suppression, paradox of anisotropy, curve matching and inversion35 min
Induced Polarizationelectrode and membrane polarization, time-domain chargeability, Seigel’s formulation, frequency effect, metal factor, phase and spectral IP, Cole–Cole model, arrays, pseudosections, EM coupling, targets and false targets30 min
EM Methods: Loop Methods, VLF, AFMAG and TEMresponse parameter, in-phase and quadrature, skin depth, low-induction-number meters, HLEM, Turam, tilt-angle, airborne EM, VLF and Fraser filter, VLF-R, AFMAG, TEM diffusion depth, decay laws, time constants40 min
Magnetotellurics and Geomagnetic Depth Soundingnatural sources, plane-wave theory, impedance, apparent resistivity and phase, Bostick transform, S-line, impedance tensor, Swift skew, TE and TM, static shift, tipper, induction arrows, GDS arrays, C-response40 min
Quick Revisionevery formula and trap on one page10 min

Official Syllabus Lines and Where They Are Covered

Official topic lineCovered in
Resistivity profiling and soundingResistivity Profiling and Sounding
Induced polarizationInduced Polarization
EM methods: loop methods, VLF, AFMAG, TEMEM Methods: Loop Methods, VLF, AFMAG and TEM; VLF-R also links to Magnetotellurics and Geomagnetic Depth Sounding
Magnetotellurics, geomagnetic depth soundingMagnetotellurics and Geomagnetic Depth Sounding; TEM static-shift correction is in EM Methods

How CSIR NET Asks It

Per the NTA information bulletin for December 2026, Earth Sciences Part C has 80 questions, of which 25 are to be attempted, at 4 marks each with −1.32 for a wrong answer, a maximum of 100 marks (full table on the Earth Sciences overview). If more than 25 Part C questions are answered, only the first 25 answered are evaluated. There is no official count of questions per unit. From the syllabus wording, expect these kinds of question:

Question typeTypical contentWhere to practise
Recognitionwhich array or method suits a target; curve type from a resistivity order; polarisation mechanism; TE or TM; natural source by frequencyLevel 1 and 2 on each page
One-step numericalgeometric factor; apparent resistivity from \( \Delta V/I \); skin depth; FE and metal factor; Fraser filter; MT \( \rho_a \) from E and B; TEM decay ratioLevel 2
Data interpretationa VES or MT table to read; equivalence; IP anomalies with different resistivities; TEM decay shape; impedance skewLevel 3
Statement evaluationequivalence and suppression; paradox of anisotropy; EM coupling; static shift; induction-arrow conventionsLevel 3

Quick Reference

QuantityValue or formula
Point source, half-space\( V = \rho I/2\pi r \)
Apparent resistivity\( \rho_a = K\Delta V/I \); Wenner \( K = 2\pi a \); Schlumberger \( \pi(L^2 - l^2)/2l \); dipole-dipole \( \pi n(n+1)(n+2)a \)
Dar Zarrouk\( S = \sum h/\rho \), \( T = \sum h\rho \)
Chargeability\( V_s/V_p \) or \( (1/V_p)\int V_s\,dt \)
Frequency effect, metal factor\( FE = (\rho_{dc} - \rho_{ac})/\rho_{ac} \); \( MF = 2\pi\times10^5 FE/\rho_{dc} \)
Response parameter\( \alpha = \omega L/R \); Q/I \( = 1/\alpha \)
Skin depth\( 503\sqrt{\rho/f} = 503\sqrt{\rho T} \) m
TEM diffusion depth\( 1262\sqrt{\rho t} \) m; half-space decay \( t^{-5/2} \)
MT apparent resistivity\( 0.2T\lvert E/B\rvert^2 \) (mV/km, nT); phase 45° uniform
Bostick\( D = 356\sqrt{\rho_a T} \), \( \rho_B = \rho_a(\pi/2\varphi - 1) \)

The density and magnetic-property counterparts of these methods are in the sister unit Gravity and Magnetic Fields of the Earth, and resistivity reappears in boreholes in well logging. Found an error? See About for how to report it.


Start Learning

Begin with the first topic:

→ Resistivity Profiling and Sounding

Advertisement
Advertisement