Skip to content

Redox, Eh–pH Diagrams and the Geochemistry of Waters and Aerosols

CSIR NET Earth Sciences geochemistry: Nernst equation, pe, Eh-pH diagrams, oxygen buffers, carbonate system, river, ground and sea water, and aerosol chemistry.

  • 19 min read
  • Updated
On this page · 13 sections
  1. Prerequisites
  2. The Hook: Red Soil Above, Grey Clay Below
  3. Redox Reactions
  4. Eh–pH Diagrams
  5. Geochemistry of Natural Waters
  6. Geochemistry of Aerosols
  7. Memory Tricks
  8. Don’t Confuse
  9. Common Mistakes
  10. Practice
  11. Quick Revision Table
  12. Key Takeaways
  13. What’s Next

Prerequisites

The Hook: Red Soil Above, Grey Clay Below

Redox Reactions

Oxidation is loss of electrons; reduction is gain (OIL RIG). A redox reaction transfers electrons from a reductant (which is oxidised) to an oxidant (which is reduced). Geochemically important couples:

ElementOxidised form (in oxic water)Reduced formGeological consequence
FeFe(III): insoluble oxyhydroxides, hematiteFe(II): soluble Fe\(^{2+}\); pyrite, sideritered beds vs grey shales; BIF; laterite
MnMn(IV): MnO\(_2\)Mn(II): solubleFe–Mn separation; Mn nodules
Ssulphate SO\(_4^{2-}\)sulphide H\(_2\)S, HS\(^-\), pyriteeuxinia; sulphide ores
UU(VI): uranyl, soluble as carbonate complexesU(IV): uraninite, insolubleroll-front and unconformity U deposits
CrCr(VI): chromate, soluble, toxicCr(III): insolublegroundwater contamination
CCO\(_2\), HCO\(_3^-\)organic matter, CH\(_4\)carbon burial, methanogenesis
NNO\(_3^-\)NH\(_4^+\), N\(_2\)denitrification
Ce, EuCe(IV) insolubleEu(II) in reducing magmasREE anomalies

Eh and the Nernst equation

For a half-reaction written as a reduction, \( \text{Ox} + m\text{H}^+ + n e^- \rightleftharpoons \text{Red} \), the redox potential relative to the standard hydrogen electrode is

$$\boxed{\text{Eh} = E^\circ + \frac{RT}{nF}\ln\frac{a_{\text{Ox}}\,a_{\text{H}^+}^{m}}{a_{\text{Red}}}}$$

At 25 °C, \( \frac{RT\ln 10}{F} = 0.05916 \) V, so

$$\boxed{\text{Eh} = E^\circ + \frac{0.0592}{n}\log\frac{a_{\text{Ox}}}{a_{\text{Red}}} - 0.0592\,\frac{m}{n}\,\text{pH}}$$

\( E^\circ \) is related to the free-energy change by \( \Delta G^\circ = -nFE^\circ \).

pe. Geochemists also use the electron activity, \( \text{pe} = -\log a_{e^-} \):

$$\boxed{\text{pe} = \frac{F\,\text{Eh}}{RT\ln 10} = \frac{\text{Eh (V)}}{0.0592}\ \text{at 25 °C}}$$

High Eh (or pe) means oxidising; low or negative means reducing.

Eh–pH Diagrams

An Eh–pH (Pourbaix) diagram shows the fields in which each species is stable at 25 °C and 1 bar, for chosen activities of dissolved species.

The stability field of water

Natural waters can only exist between two lines:

  • Upper limit (water oxidised to O\(_2\)): \( \text{O}_2 + 4\text{H}^+ + 4e^- = 2\text{H}_2\text{O} \), \( E^\circ = 1.23 \) V.
$$\text{Eh} = 1.23 + 0.0148\log p_{\text{O}_2} - 0.0592\,\text{pH} \;\xrightarrow{p_{\text{O}_2} = 1}\; \boxed{\text{Eh} = 1.23 - 0.0592\,\text{pH}}$$
  • Lower limit (water reduced to H\(_2\)): \( 2\text{H}^+ + 2e^- = \text{H}_2 \), \( E^\circ = 0 \).
$$\text{Eh} = -0.0296\log p_{\text{H}_2} - 0.0592\,\text{pH} \;\xrightarrow{p_{\text{H}_2} = 1}\; \boxed{\text{Eh} = -0.0592\,\text{pH}}$$

Both lines have slope −0.0592 V per pH unit. At pH 7 the window runs from −0.41 to +0.81 V.

Reading boundaries: the slope rule

For \( \text{Ox} + m\text{H}^+ + ne^- = \text{Red} \), the boundary has slope \( -0.0592\,m/n \) V per pH unit.

Reaction containsBoundary on Eh–pH diagramExample
electrons, no H\(^+\)horizontal (pH-independent)\( \text{Fe}^{3+} + e^- = \text{Fe}^{2+} \)
H\(^+\), no electronsvertical (Eh-independent; acid–base or hydrolysis)\( \text{Fe}^{3+} + 3\text{H}_2\text{O} = \text{Fe(OH)}_3 + 3\text{H}^+ \)
both, \( m = n \)slope −0.0592\( 3\text{Fe}_2\text{O}_3 + 2\text{H}^+ + 2e^- = 2\text{Fe}_3\text{O}_4 + \text{H}_2\text{O} \)
both, \( m = 3n \)slope −0.1775\( \text{Fe(OH)}_3 + 3\text{H}^+ + e^- = \text{Fe}^{2+} + 3\text{H}_2\text{O} \)

Boundaries between a dissolved species and a solid move when the chosen dissolved activity changes (often \( 10^{-6} \)); a lower activity enlarges the field of the dissolved species.

The iron diagram, in words

  • Fe\(^{3+}\): only in very acid, oxidising water (acid mine drainage).
  • Fe(OH)\(_3\) / hematite: the large field at moderate to high Eh over the normal pH range; oxic surface environments.
  • Fe\(^{2+}\): low-Eh and acidic to neutral waters; groundwater and anoxic lake bottoms. Iron is mobile here.
  • Magnetite, siderite (with high carbonate), pyrite (with reduced sulphur): low-Eh fields at neutral to alkaline pH.

Iron is transported in reduced, acidic groundwater and deposited where that water meets oxygen (bog iron, oxidised mine waters, BIF-like precipitation in an ocean that was anoxic at depth). Manganese oxides need a higher Eh to precipitate than Fe oxides, so where conditions become progressively oxidising, Fe precipitates first and Mn travels farther: the natural separation of Fe and Mn deposits.

Where natural environments plot

EnvironmentEhpH
Rain, streams, ocean surfacehigh (oxidising, in contact with air)rain about 5.6; rivers 6–8; seawater about 8.1
Acid mine drainagehighvery low (2–4)
Groundwater (deeper, isolated from air)intermediate to lownear neutral
Waterlogged soils, swampslowslightly acid
Euxinic basins (Black Sea deep water), organic-rich sedimentsvery low, H\(_2\)S presentnear neutral to slightly alkaline
Evaporite brinesvariablecan be alkaline

The redox ladder in sediments

As microbes oxidise organic matter, they use electron acceptors in order of decreasing energy yield:

graph TD
    A[O2 reduction: aerobic respiration] --> B[NO3- reduction: denitrification]
    B --> C[Mn IV reduction]
    C --> D[Fe III reduction]
    D --> E[SO4 2- reduction: H2S, pyrite]
    E --> F[CO2 reduction: methanogenesis]

This sequence sets the vertical zoning of pore waters below the sediment surface and the order in which redox-sensitive elements become mobile. It also explains arsenic in the Bengal Basin: As adsorbed on Fe(III) oxyhydroxides is released when burial and organic matter drive the sediment into the Fe(III)-reducing zone.

Oxygen fugacity in rocks and magmas

At high temperature redox is expressed as oxygen fugacity \( f_{\text{O}_2} \), fixed in experiments by mineral buffers. At a given temperature, in order of decreasing \( f_{\text{O}_2} \):

BufferReaction
MH (hematite–magnetite)\( 6\text{Fe}_2\text{O}_3 = 4\text{Fe}_3\text{O}_4 + \text{O}_2 \)
NNO (nickel–nickel oxide)\( 2\text{NiO} = 2\text{Ni} + \text{O}_2 \)
FMQ / QFM (fayalite–magnetite–quartz)\( 3\text{Fe}_2\text{SiO}_4 + \text{O}_2 = 2\text{Fe}_3\text{O}_4 + 3\text{SiO}_2 \)
WM (wüstite–magnetite)\( 6\text{FeO} + \text{O}_2 = 2\text{Fe}_3\text{O}_4 \)
IW (iron–wüstite)\( 2\text{Fe} + \text{O}_2 = 2\text{FeO} \)

Each buffer is a curve rising with temperature on a \( \log f_{\text{O}_2} \)–\( T \) diagram. Magma redox is quoted relative to a buffer (for example “FMQ + 1”). MORB lies near FMQ; arc magmas are generally more oxidised. Oxidised magmas carry sulphur as sulphate and favour porphyry Cu–Au; reduced ones carry sulphide and lose chalcophile metals to early sulphide melt.

Geochemistry of Natural Waters

Rainwater and the carbonate system

Three equilibria (25 °C, fresh water, with \( \text{H}_2\text{CO}_3^* \) standing for dissolved CO\(_2\) plus true carbonic acid):

$$\text{CO}_{2(g)} \rightleftharpoons \text{H}_2\text{CO}_3^* \qquad K_H = 10^{-1.47}\ \text{mol L}^{-1}\,\text{atm}^{-1}$$$$\text{H}_2\text{CO}_3^* \rightleftharpoons \text{H}^+ + \text{HCO}_3^- \qquad K_1 = 10^{-6.35}$$$$\text{HCO}_3^- \rightleftharpoons \text{H}^+ + \text{CO}_3^{2-} \qquad K_2 = 10^{-10.33}$$

Speciation. \( \text{H}_2\text{CO}_3^* \) dominates below pH 6.35, \( \text{HCO}_3^- \) between 6.35 and 10.33, and \( \text{CO}_3^{2-} \) above 10.33 (each \( \text{p}K \) is a crossover point). Most rivers and groundwaters (pH 6.5–8.5) carry dissolved inorganic carbon mostly as bicarbonate.

Rainwater pH. Pure water in equilibrium with air: \( [\text{H}^+] \approx [\text{HCO}_3^-] \), so \( [\text{H}^+]^2 = K_1K_Hp_{\text{CO}_2} \). For \( p_{\text{CO}_2} = 4\times 10^{-4} \) atm, \( [\text{H}^+] = 10^{-5.61} \): pH about 5.6. Rain below this is “acid rain”, made acid mainly by H\(_2\)SO\(_4\) and HNO\(_3\) from SO\(_2\) and NO\(_x\).

Alkalinity is the acid-neutralising capacity:

$$\text{Alk} = [\text{HCO}_3^-] + 2[\text{CO}_3^{2-}] + [\text{OH}^-] - [\text{H}^+]\ (+\ \text{borate and minor bases in seawater})$$

It is conserved when CO\(_2\) is added or removed, but changes when carbonate dissolves or precipitates.

Calcite. \( \text{CaCO}_3 = \text{Ca}^{2+} + \text{CO}_3^{2-} \), \( K_{sp} = 10^{-8.48} \) at 25 °C. The saturation index \( \text{SI} = \log(\text{IAP}/K_{sp}) \) is 0 at equilibrium, positive when supersaturated. Calcite solubility increases with \( p_{\text{CO}_2} \) and decreases with temperature (CO\(_2\) is less soluble in warm water): caves dissolve where cold, CO\(_2\)-rich soil water enters, and travertine precipitates where warm springs degas.

Chemical weathering reactions

TypeExampleWater gains
Congruent dissolution\( \text{CaCO}_3 + \text{CO}_2 + \text{H}_2\text{O} \to \text{Ca}^{2+} + 2\text{HCO}_3^- \)Ca, HCO\(_3^-\)
Incongruent (hydrolysis)\( 2\text{KAlSi}_3\text{O}_8 + 2\text{H}^+ + 9\text{H}_2\text{O} \to \text{Al}_2\text{Si}_2\text{O}_5(\text{OH})_4 + 2\text{K}^+ + 4\text{H}_4\text{SiO}_4 \)K, dissolved silica; leaves kaolinite
Oxidation\( 4\text{FeS}_2 + 15\text{O}_2 + 14\text{H}_2\text{O} \to 4\text{Fe(OH)}_3 + 8\text{SO}_4^{2-} + 16\text{H}^+ \)acid, sulphate (acid mine drainage)

The \( \text{H}^+ \) in silicate weathering comes mostly from carbonic acid, so silicate weathering converts CO\(_2\) to HCO\(_3^-\). When that bicarbonate is precipitated as carbonate in the ocean, the net reaction (the Urey reaction) \( \text{CaSiO}_3 + \text{CO}_2 \to \text{CaCO}_3 + \text{SiO}_2 \) removes CO\(_2\) from the atmosphere over millions of years (see Stable Isotopes and Geochemical Cycles). Carbonate weathering on land, by contrast, gives back the same CO\(_2\) when the carbonate precipitates in the sea.

River water

World-average river water is dominated by Ca\(^{2+}\) and HCO\(_3^-\), with dissolved silica next. A classic compilation (Livingstone, 1963) gives roughly, in mg L\(^{-1}\): HCO\(_3^-\) 58, Ca 15, SiO\(_2\) 13, SO\(_4^{2-}\) 11, Cl 8, Na 6, Mg 4, K 2. Compare seawater, dominated by Na\(^+\) and Cl\(^-\).

Gibbs (1970) diagram. Plotting TDS against Na/(Na + Ca) (or Cl/(Cl + HCO\(_3\))) separates three controls:

ControlTDSNa/(Na + Ca)Example
Precipitation dominancevery lowhighrivers of humid, low-relief tropical shields
Rock (weathering) dominanceintermediatelowmost large rivers
Evaporation–crystallisationhighhighrivers of arid regions; CaCO\(_3\) precipitates, Na remains

Groundwater: classification and quality

Units. Convert mg L\(^{-1}\) to meq L\(^{-1}\) by dividing by the equivalent weight (molar mass / charge): Ca 20.04, Mg 12.15, Na 22.99, K 39.10, HCO\(_3^-\) 61.02, Cl 35.45, SO\(_4^{2-}\) 48.03.

Ion balance error checks an analysis:

$$\text{IBE}(\%) = \frac{\sum\text{cations} - \sum\text{anions}}{\sum\text{cations} + \sum\text{anions}}\times 100 \quad (\text{meq L}^{-1})$$

Within about ±5% is usually accepted.

Hardness (as mg L\(^{-1}\) CaCO\(_3\)) \( = 2.497\,[\text{Ca}] + 4.118\,[\text{Mg}] \) (Ca, Mg in mg L\(^{-1}\)). Carbonate (temporary) hardness is removed by boiling; non-carbonate (permanent) hardness, balanced by sulphate and chloride, is not.

TDS classes: fresh below 1,000 mg L\(^{-1}\); brackish 1,000–10,000; saline 10,000–100,000; brine above 100,000.

Sodium adsorption ratio for irrigation (meq L\(^{-1}\)):

$$\boxed{\text{SAR} = \frac{\text{Na}^+}{\sqrt{(\text{Ca}^{2+} + \text{Mg}^{2+})/2}}}$$

High SAR disperses clays and lowers soil permeability.

Piper (trilinear) diagram. Cation triangle (Ca, Mg, Na + K), anion triangle (HCO\(_3\) + CO\(_3\), SO\(_4\), Cl) and a central diamond define hydrochemical facies: Ca–HCO\(_3\) (young recharge water), Na–HCO\(_3\) (cation exchange: Ca\(^{2+}\) in water exchanged for Na\(^+\) on clays), Ca–Cl and Na–Cl (saline, seawater intrusion, old or evaporated water).

Geogenic contaminants in India.

  • Arsenic: Holocene alluvial aquifers of the Bengal Basin and Ganga plain; released by reductive dissolution of Fe oxyhydroxides (above). WHO guideline value 10 µg L\(^{-1}\).
  • Fluoride: hard-rock (granite–gneiss) aquifers of peninsular India; favoured by Na–HCO\(_3\) water with high pH and low Ca (which keeps fluorite undersaturated) and long residence time. WHO guideline value 1.5 mg L\(^{-1}\).
  • Nitrate: fertiliser and sewage, not geogenic; WHO guideline value 50 mg L\(^{-1}\) as NO\(_3^-\).

More on water resources is in Hydrological Cycle and Water Resources.

Seawater

IonAbout g kg\(^{-1}\) at salinity 35
Cl\(^-\)19.35
Na\(^+\)10.78
SO\(_4^{2-}\)2.71
Mg\(^{2+}\)1.28
Ca\(^{2+}\)0.41
K\(^+\)0.40
HCO\(_3^-\)about 0.1
  • Constancy of composition (Marcet’s principle, confirmed by Dittmar’s analyses of the Challenger samples): the major ions keep nearly constant ratios to one another throughout the open ocean, because their residence times are far longer than the ocean mixing time (about 1,000 years). Salinity varies; the ratios do not.
  • pH about 8.1; dissolved inorganic carbon roughly 90% HCO\(_3^-\), about 9–10% CO\(_3^{2-}\), about 1% dissolved CO\(_2\). (Seawater uses apparent constants that differ from the freshwater values above.) Adding CO\(_2\) lowers pH and carbonate ion: ocean acidification.
  • Residence time of a constituent at steady state:
$$\boxed{\tau = \frac{\text{amount in the reservoir}}{\text{rate of input (= rate of removal)}}}$$

Conservative ions (Cl, Na) have residence times of tens to hundreds of millions of years; Mg and K about ten million; Ca about one million; particle-reactive elements (Al, Fe, Th) only hundreds of years or less. Long residence time means uniform concentration.

  • Seawater is not simply concentrated river water: Na and Cl dominate because Ca and HCO\(_3^-\) are removed by carbonate-secreting organisms, Mg by hydrothermal reaction at ridges, and Si by diatoms and radiolaria. More in Ocean Floor and Sea Water.

Geochemistry of Aerosols

An aerosol is a suspension of solid or liquid particles in a gas; in practice the particles themselves (particulate matter, PM).

Sizes and sources

ModeDiameterOriginRemoval
Nucleationbelow about 0.01 µmnew particles from gases (H\(_2\)SO\(_4\), organics)coagulation
Aitkenabout 0.01–0.1 µmgrowth of nuclei, combustioncoagulation, growth
Accumulationabout 0.1–1 µm (to 2.5)condensation, cloud processingwet deposition; longest-lived
Coarseabove about 1–2.5 µmmechanical: sea spray, dust, volcanic ash, pollengravitational settling, wet deposition

PM\(_{2.5}\) and PM\(_{10}\) are mass concentrations of particles below 2.5 and 10 µm. Fine particles are the main health concern; they reach deep into the lungs.

TypePrimary or secondaryMain sourceChemical tracers
Sea saltprimarybubble bursting at the sea surfaceNa, Cl, Mg
Mineral dustprimaryarid regions (for India: Thar, Arabia)Al, Si, Fe, Ca, Ti
Sulphatesecondaryoxidation of SO\(_2\) (fossil fuel, volcanoes) and of dimethyl sulphide (DMS) from marine phytoplanktonnon-sea-salt SO\(_4^{2-}\), methanesulphonate
Nitrate, ammoniumsecondaryNO\(_x\) and NH\(_3\) (agriculture)NO\(_3^-\), NH\(_4^+\)
Organic aerosol, black carbonprimary and secondarybiomass and fossil-fuel burning, vegetation emissionsorganic carbon, elemental carbon, K (biomass)
Volcanic ash and stratospheric sulphatebotheruptionsash; long-lived sulphate layer

Tropospheric aerosols last about a week before rain or settling removes them, so their composition varies strongly from place to place; stratospheric sulphate from large eruptions stays for about a year and cools the surface globally.

Two calculations every aerosol paper uses

Sea-salt correction. Assuming all Na is from sea salt, and using the seawater mass ratio \( \text{SO}_4^{2-}/\text{Na}^+ = 0.252 \):

$$\boxed{\text{nss-SO}_4^{2-} = \text{SO}_4^{2-} - 0.252\,\text{Na}^+}$$

Similar corrections use Cl/Na = 1.80 (mass). Aerosol Cl/Na below 1.80 shows chloride depletion: acids (H\(_2\)SO\(_4\), HNO\(_3\)) react with sea salt and release HCl gas.

Crustal enrichment factor, normalised to a crustal reference element (usually Al):

$$\boxed{\text{EF}_X = \frac{(X/\text{Al})_{\text{aerosol}}}{(X/\text{Al})_{\text{crust}}}}$$

EF near 1 means a crustal (dust) source; EF much greater than about 10 points to non-crustal sources (combustion, smelting, sea salt).

Effects

  • Direct effect: scattering by sulphate and sea salt cools; absorption by black carbon and some dust warms the aerosol layer and cools the surface below.
  • Indirect effects: aerosols act as cloud condensation nuclei (CCN). More CCN give more, smaller droplets: brighter clouds (Twomey effect) that may rain less and last longer.
  • Optical measures: aerosol optical depth (AOD) measures column extinction; the Ångström exponent \( \alpha = -\ln(\tau_1/\tau_2)/\ln(\lambda_1/\lambda_2) \) is large (above about 1) for fine particles (smoke, pollution) and small (below about 0.5) for coarse dust and sea salt.
  • Biogeochemistry: dust delivers Fe and P to the open ocean and can fertilise iron-limited regions; acid deposition acidifies soils and lakes. The DMS–sulphate–cloud link proposes a climate feedback through marine phytoplankton (the CLAW hypothesis).

Atmospheric chemistry of the gases that form secondary aerosols is covered in Tropospheric Chemistry and Air Pollution.

Memory Tricks

Don’t Confuse

ThisvsThat
Eh (volts)pe (dimensionless; Eh/0.0592 at 25 °C)
Horizontal boundary: pure electron transferVertical boundary: pure acid–base or hydrolysis
Alkalinity (acid-neutralising capacity)pH (H\(^+\) activity)
Temporary (carbonate) hardnessPermanent (non-carbonate) hardness
Primary aerosol (emitted as particles)Secondary aerosol (formed from gases)
Residence time (reservoir/flux)Mixing time of the ocean (about 1,000 yr)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Take 0.0592 V for \( RT\ln 10/F \) at 25 °C.

Level 1: Foundation

  1. What is the Eh of the upper stability limit of water at pH 7 (\( p_{\text{O}_2} = 1 \) atm)?
  2. Which carbonate species dominates at pH 8?
  3. What does an aerosol enrichment factor close to 1 indicate?
Answers
  1. \( 1.23 - 0.0592\times 7 = \) 0.82 V.
  2. Bicarbonate, HCO\(_3^-\) (between 6.35 and 10.33).
  3. A crustal (soil dust) source for that element.

Level 2: Part B Style

Practice Q1. On an Eh–pH diagram, the boundary for \( \text{Fe(OH)}_3 + 3\text{H}^+ + e^- = \text{Fe}^{2+} + 3\text{H}_2\text{O} \) has a slope of:

(a) 0 (b) −0.0592 V per pH (c) −0.118 V per pH (d) −0.178 V per pH

Answer: (d)

Slope = \( -0.0592\,m/n = -0.0592\times 3/1 = -0.178 \) V per pH.

Practice Q2. A water has Ca 40 mg L\(^{-1}\) and Mg 12 mg L\(^{-1}\). Its total hardness as CaCO\(_3\) is closest to:

(a) 52 mg L\(^{-1}\) (b) 100 mg L\(^{-1}\) (c) 149 mg L\(^{-1}\) (d) 200 mg L\(^{-1}\)

Answer: (c)

\( 2.497\times 40 + 4.118\times 12 = 99.9 + 49.4 = 149.3 \) mg L\(^{-1}\) as CaCO\(_3\): hard water. Option (a) just adds the two concentrations.

Practice Q3. A groundwater has Na 10, Ca 4 and Mg 2 meq L\(^{-1}\). Its SAR is:

(a) 1.7 (b) 3.3 (c) 5.8 (d) 10.0

Answer: (c)

\( \text{SAR} = 10/\sqrt{(4 + 2)/2} = 10/\sqrt{3} = 5.77 \).

Practice Q4. In order of decreasing oxygen fugacity at 1000 °C, the buffers are:

(a) IW > FMQ > NNO > MH (b) MH > NNO > FMQ > IW (c) NNO > MH > FMQ > IW (d) FMQ > MH > IW > NNO

Answer: (b)

Hematite–magnetite is the most oxidising common buffer; iron–wüstite the most reducing; NNO lies a little above FMQ.

Level 3: Part C Style

Practice Q5. An aerosol sample collected over the Bay of Bengal contains (µg m\(^{-3}\)): Na\(^+\) 2.0, Cl\(^-\) 1.8, SO\(_4^{2-}\) 5.0, Al 2.0, Pb 0.050. Take seawater mass ratios SO\(_4\)/Na = 0.252 and Cl/Na = 1.80, and crustal Pb = 20 ppm, Al = 8%. Which statements are correct?

  1. About 90% of the sulphate is non-sea-salt.
  2. About 50% of the sea-salt chloride has been lost.
  3. The crustal enrichment factor of Pb is about 100, pointing to an anthropogenic source.
  4. The Cl deficit means the particles have been exposed to acidic gases.

(a) 1 and 3 only (b) 1, 2 and 3 only (c) 1, 2, 3 and 4 (d) 2 and 4 only

Answer: (c) 1, 2, 3 and 4
  • 1 true: sea-salt SO\(_4\) = \( 0.252\times 2.0 = 0.504 \); nss = 4.50, that is 90% of 5.0.
  • 2 true: expected Cl = \( 1.80\times 2.0 = 3.6 \); measured 1.8, so 50% depleted.
  • 3 true: \( (0.050/2.0)/(20/80{,}000) = 0.025/0.00025 = 100 \).
  • 4 true: H\(_2\)SO\(_4\) and HNO\(_3\) displace HCl from NaCl particles; the high nss-sulphate supports it.

Practice Q6. For rainwater in equilibrium only with atmospheric CO\(_2\) at \( 4.0\times 10^{-4} \) atm (\( K_H = 10^{-1.47} \), \( K_1 = 10^{-6.35} \)), and a sample of rain with pH 4.3, which conclusion is correct?

(a) Natural pH about 5.6; the sample is about 20 times more acidic, implying strong acids (b) Natural pH 7.0; the sample is about 500 times more acidic (c) Natural pH about 5.6; the sample is only about 1.3 times more acidic (d) Natural pH about 4.3; the sample is unpolluted

Answer: (a)

\( [\text{H}^+]^2 = 10^{-6.35}\times 10^{-1.47}\times 4.0\times 10^{-4} = 10^{-11.22} \), so \( [\text{H}^+] = 10^{-5.61} \): pH 5.61. The sample: \( 10^{-4.3}/10^{-5.61} = 10^{1.31} \approx 20 \) times more H\(^+\). Such acidity needs H\(_2\)SO\(_4\) or HNO\(_3\). Option (c) takes the ratio of pH values (5.6/4.3) instead of H\(^+\) activities.

Quick Revision Table

ConceptKey point
Nernst\( \text{Eh} = E^\circ + (0.0592/n)\log(a_{\text{ox}}/a_{\text{red}}) - 0.0592(m/n)\text{pH} \)
peEh/0.0592 at 25 °C
Water limits\( 1.23 - 0.0592\,\text{pH} \) and \( -0.0592\,\text{pH} \)
Boundary typeshorizontal (e\(^-\) only), vertical (H\(^+\) only), sloping (both)
Fe and MnFe(II), Mn(II) mobile; oxides precipitate at redox fronts, Mn needs higher Eh
U, CrU(VI) and Cr(VI) mobile; U(IV), Cr(III) immobile
Redox ladderO\(_2\) → NO\(_3^-\) → Mn(IV) → Fe(III) → SO\(_4^{2-}\) → CO\(_2\)
BuffersMH > NNO > FMQ > WM > IW
Carbonatep\(K\) 6.35, 10.33; rain 5.6; calcite \( K_{sp} = 10^{-8.48} \)
Hardness\( 2.497\,\text{Ca} + 4.118\,\text{Mg} \) (as CaCO\(_3\))
SARNa/\( \sqrt{(\text{Ca} + \text{Mg})/2} \) in meq L\(^{-1}\)
SeawaterCl > Na > SO\(_4\) > Mg > Ca ≈ K; pH 8.1; constant ratios
Residence timereservoir/flux; Cl, Na long; Al, Fe short
Aerosol modesnucleation, Aitken, accumulation, coarse
nss-sulphateSO\(_4\) − 0.252 Na
EF(X/Al)\(_{\text{aer}}\)/(X/Al)\(_{\text{crust}}\)

Key Takeaways

What’s Next

The next two topics turn to isotopes: first radioactive decay as a clock and tracer in Radiogenic Isotopes and Geochronology, then mass-dependent fractionation and element cycles in Stable Isotopes and Geochemical Cycles. For the atmospheric layers in which aerosols act, see Atmospheric Structure, Stability and Radiation.