Skip to content

Physiography and Geological Framework of India

CSIR NET Physical Geography: Himalaya, Indo-Gangetic plains, Peninsular shield, Gondwana basins and Deccan Plateau, with the geology behind each region.

  • 23 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: One Train Journey, Billions of Years
  3. The Three-Part Structure of India
  4. The Himalaya
  5. The Indo-Gangetic–Brahmaputra Plains
  6. The Peninsular Shield
  7. The Gondwana Basins
  8. The Deccan Plateau and the Deccan Traps
  9. Coasts and Islands in One Glance
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: One Train Journey, Billions of Years

The Three-Part Structure of India

India divides into three first-order units, each with its own tectonic setting:

UnitTectonic settingAge of surface rocksRelief
Extra-Peninsula (Himalaya and Purvanchal)active collisional orogenmostly Mesozoic–Cenozoic deformation of older rocksyoung, high, steep; seismically active
Indo-Gangetic–Brahmaputra plainsforeland basin in front of the HimalayaQuaternary alluvium on topflat, low-gradient
Peninsulastable Precambrian shield with cover basinsArchaean to Cretaceous (Deccan)old, worn-down plateaus, residual hills, escarpments

Coastal plains, the Thar desert and the islands are fringing units on this frame. The organising idea is simple: the Peninsula is the Indian plate, the Himalaya are its crumpled northern edge, and the plains are the trough that the weight of the mountains has pressed into the plate.

graph LR
    A["Peninsular shield
(Indian plate, stable)"] -->|"plate flexes under
mountain load"| B["Indo-Gangetic foreland basin
(alluvium fills the trough)"] B -->|"thrust front
advances south"| C["Himalaya
(thrust sheets of the
plate's northern margin)"] C -->|"Indus-Tsangpo
Suture"| D["Asia (Tibet)"]

The Himalaya

Scale and shape

The Himalaya run as an arc, convex to the south, for about 2,400 km from the Indus gorge near Nanga Parbat in the west to the Brahmaputra gorge near Namcha Barwa in the east. Their width varies from roughly 400 km in Kashmir to about 150 km in Arunachal Pradesh, and the arc bends sharply at both ends around the western and eastern syntaxes. India’s convergence with Asia continues at a few centimetres a year; GPS studies place roughly 2 cm/yr of it across the Himalaya, which is why the belt is still rising and still generating great earthquakes.

Physiographic ranges and tectonic zones

The physiographic ranges a geographer names coincide closely with tectonic zones bounded by major faults:

Physiographic range (south to north)Tectonic zoneRocksBounding structure at its base
Shiwalik (Outer Himalaya)Sub-HimalayaNeogene–Quaternary molasse of the Siwalik Group: sandstone, mudstone, conglomerate eroded from the rising ranges; rich vertebrate fossilsMain Frontal Thrust (MFT), against the plains
Lesser Himalaya (Himachal)Lesser Himalayan sequenceProterozoic metasediments (quartzite, slate, carbonates), granites; nappes and klippenMain Boundary Thrust (MBT), over the Siwaliks
Greater Himalaya (Himadri)Higher Himalayan Crystallineshigh-grade gneiss, migmatite, Miocene leucograniteMain Central Thrust (MCT), over the Lesser Himalaya
Tethyan (Tibetan) HimalayaTethys HimalayaPalaeozoic–Mesozoic fossiliferous marine sediments of the northern Indian marginSouth Tibetan Detachment (STD), a north-dipping normal fault at its base
Trans-Himalaya (Ladakh, Karakoram, Kailash)Asian margin; Ladakh batholithAndean-type arc granitoids, ophiolites along the sutureIndus–Tsangpo Suture Zone (ITSZ)

Two consequences of this arrangement are favourite Part C material:

  1. The thrusts young southward. The MCT is older than the MBT, which is older than the MFT. The deformation front has migrated into the foreland, slicing successive pieces of the Indian plate and stacking them.
  2. The highest ground is the crystalline core. The Greater Himalaya stand above the Lesser Himalaya because the MCT has carried deep, strong rocks up and over, and because rivers have not yet worn them down.

Longitudinal features

FeatureWhat and where
Dunsflat, gravel-filled longitudinal valleys between the Shiwalik and the Lesser Himalaya: Dehra Dun, Kotli Dun, Patli Dun
Karewasflat-topped terraces of Plio-Pleistocene lake and glacial sediments in the Kashmir valley, used for saffron cultivation
Kashmir valleya broad intermontane basin between the Pir Panjal (Lesser Himalaya) and the Greater Himalaya
Transverse gorgesdeep cuts where antecedent rivers cross the ranges: Indus near Nanga Parbat, Sutlej, Brahmaputra (Dihang) around Namcha Barwa
PassesZoji La (Greater Himalaya, Srinagar–Leh), Shipki La (Sutlej), Nathu La (Sikkim–Tibet), Bomdi La (Arunachal)

Regional divisions along the arc

DivisionBetween riversNotes
Punjab (Kashmir and Himachal) HimalayaIndus and SutlejKarakoram, Ladakh, Zaskar, Pir Panjal, Dhauladhar
Kumaon HimalayaSutlej and KaliNanda Devi, Badrinath, Kedarnath; sources of the Ganga and Yamuna
Nepal HimalayaKali and Tistathe highest section; Everest, Kangchenjunga on the Nepal–Sikkim border
Assam HimalayaTista and Dihanglower, steeper towards the plains; heavy rainfall

Beyond the Dihang the mountains swing south as the Purvanchal (Patkai Bum, Naga, Manipur and Mizo hills), mostly Tertiary folded sediments that continue into the Arakan Yoma of Myanmar. The Meghalaya plateau is not part of this belt: it is a detached block of the Peninsula (see below).

Why the Himalaya matter beyond themselves

  • They block cold Central Asian air in winter, so north India is warmer in winter than other places at the same latitude.
  • They force the monsoon to rise and give up its moisture over the plains and the foothills; the heating of the Tibetan Plateau to their north helps drive the monsoon circulation (see Indian Climatology and Climate Zones).
  • They feed perennial rivers with snow and glacier melt and supply the sediment that builds the plains and the Bengal delta.
  • They are a hazard belt: great thrust earthquakes, landslides, glacial lake outburst floods (see Environmental Issues of India).

The Indo-Gangetic–Brahmaputra Plains

A foreland basin

As thrust sheets piled up, their weight bent the Indian lithosphere down in front of them, creating a long trough. Rivers draining the Himalaya have filled it. The result is one of the largest alluvial plains in the world, about 2,400 km long and a few hundred kilometres wide, with gradients so low that a river may fall only a few hundred metres over more than 1,500 km.

Key geological facts:

FeatureDetail
FillSiwalik-type molasse at depth, Quaternary alluvium at the surface
Thicknessthe sediment wedge thickens northward towards the Himalayan front, to several kilometres; it thins to a feather edge against the Peninsula in the south
Basementthe Peninsular shield continues under the alluvium
Basement ridgesburied transverse highs of the Peninsula extend northward under the plains: the Delhi–Haridwar ridge (continuation of the Aravalli), the Faizabad ridge and the Monghyr–Saharsa ridge; they influence river courses and earthquake rupture segments
Gapsthe Garo–Rajmahal gap, an alluvium-filled depression, separates the Meghalaya plateau from the Chota Nagpur plateau

Belts from the mountain front to the river

BeltMaterialHydrology
Bhabarcoarse boulders and gravel of coalescing alluvial fans at the foot of the Shiwalik, about 8–16 km widestreams sink into the porous gravel and many vanish
Teraifiner sand and siltwater re-emerges as springs; marshy, formerly forested
Bhangarolder alluvium on interfluve uplands, above flood level; calcareous nodules (kankar)rarely flooded
Khadarnewer alluvium of active floodplainsrenewed by floods each monsoon; most fertile

Megafans and avulsion

Large Himalayan rivers leaving the mountains spread out as megafans: low cones tens of thousands of square kilometres in area, built as the river shifts its course across them. The Kosi megafan in north Bihar is the classic example. A river on a megafan builds its bed above the surrounding plain (a superelevated channel), and when an embankment or natural levee fails it may abruptly jump to a new course, an avulsion. The Kosi’s westward migration across its fan over the last two centuries and its 2008 breach at Kusaha (Nepal), when it switched eastward into old channels, are standard examples. The Gandak and Ghaghara also build large fans.

Regional divisions

DivisionNotes
Punjab–Haryana plainsbuilt by the Indus tributaries; doabs (Bist–Jalandhar between Beas and Sutlej, Bari between Beas and Ravi, and so on); semi-arid to sub-humid
Ganga plainsUpper (Ganga–Yamuna Doab, Rohilkhand), Middle (Awadh, north Bihar), Lower (West Bengal, delta); rainfall increases eastward
Brahmaputra (Assam) valleya narrow trough between the Himalaya and the Meghalaya plateau; braided channels, river islands such as Majuli
Ganga–Brahmaputra deltaactive delta in the east (Bangladesh); moribund western delta in West Bengal where channels have been abandoned; Sundarbans mangroves

The Indus–Ganga water divide on the plains is not a mountain ridge but a very low rise near Ambala, in the Punjab–Haryana plains, so rain falling on one side ends in the Arabian Sea and on the other in the Bay of Bengal. The Aravalli, further south-west, separates the Ganga system (Chambal, Banas) from the inland and Luni drainage of the Thar.

The Peninsular Shield

Cratons and mobile belts

The Peninsula is a mosaic of Archaean cratons (old, stable nuclei of granite–greenstone and gneiss) welded together by Proterozoic mobile belts (zones of later deformation and high-grade metamorphism), and covered in places by Proterozoic, Gondwana and Deccan rocks.

ComponentExamplesCharacter
CratonsDharwar (western and eastern), Bastar, Singhbhum, Bundelkhand, Aravalli (Banded Gneissic Complex)Archaean gneisses and greenstone belts; Singhbhum and Dharwar contain some of India’s oldest rocks, older than about 3 Ga
Mobile beltsEastern Ghats Mobile Belt, Southern Granulite Terrain, Central Indian Tectonic Zone (Satpura belt), Aravalli–Delhi fold beltProterozoic orogens; granulites, charnockites, khondalites in the Eastern Ghats and the south
Proterozoic (Purana) basinsCuddapah, Vindhyan, Chhattisgarh, Kaladgi, Bhimathick, little-deformed sandstones, shales and limestones
Gondwana basinsDamodar, Son–Mahanadi, Pranhita–Godavari, SatpuraLate Palaeozoic–Mesozoic rift fills with coal
Deccan TrapsMaharashtra, MP, Gujarat, Karnatakaend-Cretaceous flood basalts

Details of these units are in Indian Rock Suites; here the point is how they shape the landscape.

Physiographic units of the Peninsula

UnitRocks underneathLandscape
Aravalli rangeProterozoic Aravalli–Delhi fold belta worn-down fold mountain, highest at Guru Shikhar (Mount Abu); separates the Thar from the Malwa plateau
Malwa plateaumostly Deccan basalt and Vindhyan rocksrolling plateau, black soils; drained north by the Chambal and Betwa
BundelkhandBundelkhand granite–gneiss cratonlow, dissected granite uplands with tors; ravines along the Chambal and Yamuna
Vindhyan scarpVindhyan sandstonesprominent south-facing escarpment above the Narmada valley; waterfalls on the Son tributaries
Chota Nagpur plateauSinghbhum craton, Chota Nagpur gneisses, Gondwana basinsseries of erosion surfaces (pats, the Ranchi plateau), very rich in minerals
Narmada–Son troughfault-bounded rift along the Son–Narmada lineamentNarmada in a narrow rift valley flowing west; the Son flows north-east in the same lineament
Satpura rangeGondwana and Deccan rocks over the Central Indian Tectonic Zoneblock mountain between the Narmada and Tapi troughs
Deccan PlateauDeccan Traps (north-west), Dharwar craton (south)flat-topped trap country in the north, granite–gneiss plateau with residual hills in the south (Karnataka plateau, Telangana)
Western Ghats (Sahyadri)Deccan basalt (north), Precambrian gneiss and charnockite (south)a continuous west-facing escarpment along a rifted margin; higher in the south (Nilgiri, Anamalai, Palani, Cardamom hills)
Eastern GhatsEastern Ghats Mobile Belt (granulites, khondalites, charnockites)discontinuous, lower hills cut by the large east-flowing rivers
Meghalaya plateauPrecambrian gneiss with Cretaceous–Tertiary coverGaro, Khasi and Jaintia hills; steep southern scarp, very high rainfall

Why the Peninsula tilts east

Most of the large Peninsular rivers (Godavari, Krishna, Kaveri and the Tungabhadra) rise in or near the Western Ghats, close to the west coast, and flow across the whole Peninsula to the Bay of Bengal. The plateau slopes east, usually explained by uplift of the western margin during the rifting of India from Madagascar and later from the Seychelles in the Late Cretaceous–early Cenozoic (the exact uplift history is debated). The Western Ghats are the eroding escarpment of that rifted margin: a high, west-facing step retreating inland, with a short, steep drop to the Arabian Sea and a long, gentle back-slope to the east. The west-flowing Narmada and Tapi are exceptions because they follow older rift troughs across the slope.

The Palghat gap

The Western Ghats are interrupted near 11° N by the Palghat (Palakkad) gap, a low corridor about 30 km wide between the Nilgiri–Anamalai blocks. It follows a major Precambrian shear zone (the Palghat–Cauvery shear zone system) in the Southern Granulite Terrain. It carries the main road and railway between Kerala and Tamil Nadu and lets some south-west monsoon air and moisture through to the rain-shadow plains of western Tamil Nadu.

The Gondwana Basins

What and where

The Gondwana basins are narrow, elongated, fault-bounded troughs inside the Peninsula, filled with continental sediments from the Late Carboniferous–Permian to the Early Cretaceous. They lie mostly along present-day river valleys, because the rivers follow the same old fault zones:

Basin beltMain coalfieldsRiver
Damodar–Koel valleyRaniganj, Jharia, Bokaro, KaranpuraDamodar
Son–Mahanadi valleySingrauli, Korba, Talcher, Ib RiverSon, Mahanadi
Pranhita–Godavari valleySingareni (Telangana), Wardha valleyGodavari, Wardha, Pranhita
Satpura basinPench–Kanhan, PathakheraTawa
Rajmahal hillsRajmahal(Ganga bend)

They formed as intracratonic rifts and half-grabens inside Gondwanaland, mostly along older Precambrian weak zones. Their location along valleys explains why India’s coal belt is not spread over the plateau but concentrated in strips.

Stratigraphy in one table

DivisionFormation (Damodar valley names)AgeEnvironment and content
Lower GondwanaTalchirearliest Permiantillite and varved shales: glacial deposits, evidence of the Permo-Carboniferous Gondwana glaciation
KarharbariEarly Permiancoal-bearing
BarakarEarly Permiansandstone–shale–coal: the most important coal measures
Barren MeasuresMiddle Permianshales, ironstone, little coal
RaniganjLate Permiansecond major coal horizon
Upper GondwanaPanchetEarly Triassicred beds, reptiles (Lystrosaurus)
Mahadeva / Supra-PanchetTriassicsandstones
RajmahalEarly CretaceousRajmahal Traps (basalt flows) with intertrappean plant beds

Flora: the Lower Gondwana carries the Glossopteris flora (seed ferns of a cool, wet climate), which is the coal-forming vegetation; the Upper Gondwana carries Dicroidium and Ptilophyllum floras. The same Glossopteris flora in South America, Africa, Antarctica and Australia was one of the classic proofs of a former supercontinent.

Why they matter to a geographer

  • They hold the overwhelming bulk of India’s coal, so the Damodar valley, Singrauli, Korba and Talcher became India’s energy and steel belt (Jamshedpur, Bokaro, Durgapur, Rourkela, Bhilai lie close to Gondwana coal and Precambrian iron ore).
  • Their soft sandstones and shales weather into low, often degraded land with mining scars; mine fires (Jharia) and acid drainage are major environmental issues (see Drainage, Soils and Natural Resources).
  • Tertiary coal (Assam, Meghalaya) and lignite (Neyveli in Tamil Nadu, Kutch, Rajasthan) are separate, younger, smaller resources.

The Deccan Plateau and the Deccan Traps

The basalt province

The Deccan Traps are a continental flood-basalt province erupted close to the Cretaceous–Palaeogene boundary (about 66 Ma), linked to the Réunion hotspot as India drifted north over it. Their present outcrop covers about 5 lakh km\(^2\) of western and central India, mainly Maharashtra, with extensions into Gujarat, Madhya Pradesh, Karnataka and Telangana; erosion has removed a large part of the original extent. Most of the volume erupted in a geologically short time, well under a few million years.

FeatureDetail
Rockmainly tholeiitic basalt; minor alkaline rocks and differentiates
Flowsindividual flows from a few metres to tens of metres thick, nearly horizontal; compound pahoehoe and simple flows
Stack thicknessgreatest in the Western Ghats, where well over a kilometre of flows is exposed
Between flowsred boles (weathered flow tops) and intertrappean beds (lake and river sediments with fossils)
BelowLameta (infratrappean) beds, with dinosaur remains and eggs
Nametrap from the Swedish trappa, a staircase: the step-like hillsides of stacked flows

Landforms of trap country

  • Flat-topped hills, mesas and buttes: horizontal flows resist erosion unevenly, leaving tabular hills (the Mahabaleshwar and Matheran plateaus).
  • Step-like slopes: hard massive flow interiors form cliffs, vesicular flow tops and red boles form benches.
  • Escarpment and ghats: the Western Ghats in Maharashtra are a basalt escarpment; roads and railways climb it through ghats such as the Bhor and Thal ghats.
  • Lonar crater (Buldhana, Maharashtra): a meteorite impact crater formed in Deccan basalt, holding a saline, alkaline lake.

Soils and resources

Weathering of basalt gives black cotton soil (regur): clay-rich (smectite), with high water-holding capacity, swelling when wet and cracking when dry. On the high-rainfall Western Ghats and the coastal strip the same basalt weathers to laterite and bauxite. Basalt itself is a building stone and road metal; the traps host few metallic ores. Groundwater in trap country is limited to weathered and fractured zones and vesicular flow tops, which is why the rain-shadow Deccan is drought-prone.

Coasts and Islands in One Glance

FeatureWest coastEast coast
Widthnarrow, between the Ghats and the seabroad
Originrifted margin; drowned valleysprograding deltas
Typical formsestuaries, kayals (backwaters), cliffs, pocket beachesdeltas, lagoons (Chilika, Pulicat), beach ridges
DivisionsKachchh–Kathiawar, Konkan, Kanara, MalabarUtkal, Andhra (Northern Circars), Coromandel

The Andaman and Nicobar Islands are the emergent crest of an accretionary ridge above the subduction of the Indian plate beneath the Burma microplate (the continuation of the Arakan Yoma); Barren Island is India’s only active volcano. Lakshadweep consists of coral atolls on the Chagos–Laccadive ridge, a hotspot track of the Réunion plume.

Memory Tricks

Don’t Confuse

ThisvsThat
Dun: longitudinal valley between Shiwalik and Lesser HimalayaDoab: interfluve between two rivers on the plains
Karewa: lake-sediment terrace in KashmirKankar: calcareous nodules in old alluvium (bhangar)
Main Central Thrust: Greater over Lesser HimalayaMain Boundary Thrust: Lesser Himalaya over Siwaliks
South Tibetan Detachment: north-dipping normal faultIndus–Tsangpo Suture: the plate boundary with Asia
Meghalaya plateau: detached Peninsular blockPurvanchal: Tertiary fold hills of the eastern Himalayan arc
Gondwana basins: Permian–Cretaceous continental rifts with coalPurana basins (Cuddapah, Vindhyan): Proterozoic marine–shelf sediments
Deccan Traps: about 66 Ma, Réunion hotspotRajmahal Traps: Early Cretaceous, Kerguelen hotspot
Western Ghats: continuous rift-margin escarpmentEastern Ghats: discontinuous hills of a Proterozoic mobile belt
Bhabar: gravel, streams sinkTerai: marshy, streams re-emerge

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which fault carries the Greater Himalaya over the Lesser Himalaya?
  2. Name the glacial formation at the base of the Gondwana succession.
  3. Which hotspot is linked to the Deccan Traps?
Answers
  1. Main Central Thrust (MCT).
  2. Talchir Formation (tillite and varved shales).
  3. Réunion hotspot.

Level 2: Part B Style

Practice Q1. Arrange the following from south to north across the Himalaya: P. Main Boundary Thrust; Q. Indus–Tsangpo Suture; R. Main Frontal Thrust; S. Main Central Thrust.

(a) R, P, S, Q (b) P, R, S, Q (c) R, S, P, Q (d) Q, S, P, R

Answer: (a) R, P, S, Q

From the plains northward: MFT (Siwalik over the plains), MBT (Lesser Himalaya over the Siwalik), MCT (Greater over Lesser), then the suture with Asia. Option (d) is the same list north to south.

Practice Q2. India’s coalfields are concentrated in narrow belts along the Damodar, Son, Mahanadi and Godavari valleys mainly because:

(a) rivers transported the coal from the Himalaya (b) the coal formed in fault-bounded Gondwana rift basins that the present rivers follow (c) the coal formed in shallow seas that flooded the river valleys in the Cenozoic (d) the valleys are underlain by Deccan basalt, which preserves coal

Answer: (b)

The Gondwana basins are intracratonic rifts along old weak zones; the rivers follow the same structures. The coal is Permian, continental and in place, not transported (a), not Cenozoic marine (c), and it lies below, not within, the basalt (d).

Practice Q3. The Meghalaya plateau is best described as:

(a) part of the Purvanchal fold belt (b) a detached part of the Peninsular block separated by the Garo–Rajmahal gap (c) a volcanic plateau of Deccan age (d) a Quaternary alluvial upland

Answer: (b)

It is made of Precambrian gneiss with younger cover, like the Chota Nagpur plateau, and is separated from it by the alluvium-filled Garo–Rajmahal gap.

Practice Q4. Match the landform with its region.

LandformRegion
P. Karewa1. Ganga plain
Q. Khadar2. Deccan trap country
R. Mesa and butte3. Kashmir valley
S. Kayal4. Malabar coast

(a) P-3, Q-1, R-2, S-4 (b) P-1, Q-3, R-2, S-4 (c) P-3, Q-2, R-1, S-4 (d) P-4, Q-1, R-2, S-3

Answer: (a) P-3, Q-1, R-2, S-4

Karewas are lake terraces in Kashmir; khadar is new floodplain alluvium; flat-lying basalt flows give mesas and buttes; kayals are the backwaters of Kerala.

Level 3: Part C Style

Practice Q5. GPS data show that a section of the Himalaya is shortening at 18 mm/yr, and trenching across the Main Frontal Thrust shows that this section last ruptured in a great earthquake 500 years ago with no slip since. Assume all the shortening is stored as elastic strain on the MFT and released only in great earthquakes. Which statements are correct?

  1. The slip deficit accumulated since the last earthquake is 9 m.
  2. If a future earthquake releases 15 m of slip, the expected recurrence interval at this rate is about 830 years.
  3. At this rate the Himalaya shorten by 18 km in one million years.
  4. The deficit would be the same if the shortening rate were 1.8 cm/yr.

(a) 1, 2, 3 and 4 (b) 1 and 3 only (c) 2 and 4 only (d) 1, 3 and 4 only

Answer: (a) 1, 2, 3 and 4
  • 1 true: \( 18 \text{ mm/yr} \times 500 \text{ yr} = 9000 \text{ mm} = 9 \text{ m} \).
  • 2 true: \( 15{,}000 \text{ mm} / 18 \text{ mm/yr} \approx 833 \) years.
  • 3 true: \( 18 \text{ mm/yr} \times 10^6 \text{ yr} = 1.8 \times 10^7 \text{ mm} = 18 \text{ km} \).
  • 4 true: 1.8 cm/yr is the same rate as 18 mm/yr, a units trap.

This is a simplified elastic-rebound budget; real faults also release some slip aseismically.

Practice Q6. A student estimates the volume of the Deccan Traps from two assumptions: a present outcrop of \( 5.0 \times 10^5 \text{ km}^2 \) and an average stack thickness of 0.8 km. If erosion is believed to have removed half of the original volume, which values follow?

  1. Present volume about \( 4.0 \times 10^5 \text{ km}^3 \).
  2. Original volume about \( 8.0 \times 10^5 \text{ km}^3 \).
  3. If the original volume erupted over 800,000 years, the mean eruption rate was about 1 km\(^3\) per year.
  4. If the original volume erupted over 800,000 years, the mean eruption rate was about 0.1 km\(^3\) per year.

(a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 1 and 2 only (d) 2 and 3 only

Answer: (a) 1, 2 and 3 only
  • 1: \( 5.0 \times 10^5 \times 0.8 = 4.0 \times 10^5 \) km\(^3\). True.
  • 2: half has been removed, so the original was twice the present: \( 8.0 \times 10^5 \) km\(^3\). True.
  • 3: \( 8.0 \times 10^5 / 8.0 \times 10^5 = 1.0 \) km\(^3\)/yr. True, so 4 is false.

The numbers are assumptions given in the question, chosen to show the method; published volume estimates vary widely.

Practice Q7. A river leaves the Himalaya at an elevation of 300 m and reaches the sea after 2,000 km across a foreland plain. Another river rises at 1,000 m in the Western Ghats, 60 km from the Arabian Sea, and flows west. Which statements are correct?

  1. The mean gradient of the plains river is 0.15 m/km.
  2. The mean gradient of the west-flowing Ghats river is about 16.7 m/km, more than 100 times that of the plains river.
  3. The steep gradient of the Ghats river is consistent with a short river descending a rifted-margin escarpment.
  4. The plains river is more likely to form braided reaches, megafans and avulsions where it leaves the mountains because its gradient falls abruptly there and sediment is deposited.

(a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 2, 3 and 4 only (d) 1, 3 and 4 only

Answer: (a) 1, 2, 3 and 4
  • 1: \( 300/2000 = 0.15 \) m/km. True.
  • 2: \( 1000/60 = 16.7 \) m/km; \( 16.7/0.15 = 111 \). True.
  • 3: short, steep west-flowing rivers drain the Western Ghats escarpment. True.
  • 4: an abrupt fall in gradient at the mountain front reduces transport capacity, so coarse load is dropped, building fans and causing channel switching. True.

Quick Revision Table

IdeaFact
Three-part framePeninsula = stable shield; Himalaya = crumpled plate edge; plains = foreland basin
Himalaya S→NShiwalik (Siwalik molasse), Lesser (Proterozoic metasediments), Greater (crystallines), Tethyan (marine sediments), Trans-Himalaya (Ladakh batholith)
Structures N→SITSZ, STD (normal), MCT, MBT, MFT; thrusts young southward
Himalayan featuresduns, karewas, transverse gorges, syntaxes (Nanga Parbat, Namcha Barwa)
Plainsbhabar, terai, bhangar (kankar), khadar; basement ridges (Delhi–Haridwar, Faizabad, Monghyr–Saharsa); megafans (Kosi)
CratonsDharwar, Bastar, Singhbhum, Bundelkhand, Aravalli (BGC)
Mobile beltsEastern Ghats, Southern Granulite Terrain, CITZ, Aravalli–Delhi
Peninsular tilteast, because the western rifted margin was uplifted; Narmada and Tapi follow rifts west
GondwanaPermian–Early Cretaceous rifts along Damodar, Son–Mahanadi, Pranhita–Godavari, Satpura; Talchir tillite, Barakar and Raniganj coal; Glossopteris
Deccan Trapsabout 66 Ma, Réunion; tholeiitic basalt; red boles, intertrappeans, Lameta below; regur soil; Lonar crater
IslandsAndaman–Nicobar accretionary ridge, Barren Island volcano; Lakshadweep atolls on the Chagos–Laccadive ridge

Key Takeaways

What’s Next

The relief you have just mapped controls where water flows, which soils form and where minerals lie. Continue with Drainage, Soils and Natural Resources of India, or go back to the chapter overview.