Skip to content

Concepts, Historical and Process Geomorphology; Climate, Rock Type and Structure

CSIR NET Earth Sciences Part C Physical Geography: geomorphic concepts, Davis to Hack, systems, thresholds, magnitude-frequency, and landform controls.

  • 24 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Two Landscapes, One Rock
  3. Fundamental Concepts
  4. Historical Geomorphology: From Hutton to Hack
  5. Process Geomorphology
  6. Landforms and Climate
  7. Landforms and Rock Type
  8. Landforms and Structure
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Two Landscapes, One Rock

Fundamental Concepts

Geomorphology is the science of landforms: their description, origin and evolution, and the processes that shape them. The classic list of guiding ideas is the set of fundamental concepts in Thornbury’s Principles of Geomorphology. In paraphrase:

ConceptWhat it means in practice
Uniformitarianismthe same physical processes operate today as in the past, though not necessarily at the same intensity
Structure is a dominant controllandforms reflect the rocks and their arrangement
Relief exists because processes act at different ratesdifferential erosion of hard and soft rock
Each process leaves a distinctive imprintlandforms can be assigned to a process: glacial, fluvial, aeolian
Erosion produces an orderly sequence of landformsthe basis of stage-based models
Complexity is more common than simplicitymost landscapes are polycyclic or polygenetic
Little topography is older than the Tertiary; most is Pleistocene or youngerrelief is young on geological time scales
Pleistocene changes must be understoodglacial–interglacial climate and sea-level swings left relict forms everywhere
World climates control the relative importance of processesthe basis of climatic geomorphology
Historical extension makes geomorphology most usefullandforms are archives of tectonic and climatic history

Several further concepts appear constantly in Part C statements:

  • Equifinality: different processes or histories can produce similar forms. A pediment, a marine platform and an etchplain can all be flat, planed rock surfaces.
  • Ergodic reasoning (space-for-time substitution): a set of landforms of different ages in space is read as a time sequence, for example a series of terraces or a chronosequence of moraines.
  • Base level: the lowest level to which a river can erode; sea level is the ultimate base level, lakes and resistant beds are local base levels. The idea is J. W. Powell’s (1875).
  • Endogenic versus exogenic: internal (tectonic, volcanic) processes build relief; external (solar and gravity-driven) processes wear it down. Landforms are the instantaneous balance of the two.
  • Scale: processes, forms and time scales are linked. A ripple forms in minutes; a mountain range in millions of years.

Historical Geomorphology: From Hutton to Hack

The founders

WorkerContribution
James Hutton (1785 paper; Theory of the Earth, 1795)the cycle of uplift, erosion and deposition; deep time
John Playfair (1802)popularised Hutton; Playfair’s law: tributaries join the main valley at its level (accordant junctions), so valleys are cut by the streams that occupy them
Charles Lyell (Principles of Geology, 1830–33)uniformitarianism as a working method
J. W. Powell (1875)base level; antecedent rivers (the Green River across the Uinta uplift)
G. K. Gilbert (Geology of the Henry Mountains, 1877)process-based laws: law of declivities (slope adjusts to discharge), law of structure (soft rocks are worn faster), law of divides; concepts of grade and equilibrium

Gilbert is regarded as the founder of process geomorphology, three-quarters of a century before it became the main approach.

The cycle of erosion (W. M. Davis, 1899)

Davis’s geographical cycle treated landforms as a function of structure, process and stage. A landmass is uplifted rapidly, then stands still while rivers and slopes wear it down through:

StageValleysDivides and reliefDrainage
Youthnarrow, V-shaped, waterfalls and rapidsbroad, flat upland divides remain; relief increasingfew, poorly integrated streams
Maturityvalleys widen, graded profilesdivides become sharp; maximum reliefdense, integrated network
Old agebroad floodplains, meandersrelief low; residual hills (monadnocks)sluggish rivers
End formpeneplain

Rejuvenation (renewed uplift or base-level fall) starts a new cycle, giving polycyclic landscapes: uplifted erosion surfaces, incised meanders, knickpoints, valley-in-valley forms. Davis also defined “normal” (humid) cycles and accidents: arid and glacial cycles and climatic or volcanic interruptions.

Criticisms: uplift is rarely rapid and followed by stillstand; slopes do not simply decline; “stage” is not a measurable variable; true peneplains are hard to find near sea level; the model is qualitative.

Walther Penck (Die morphologische Analyse, 1924)

Penck tied slope form to the ratio of uplift rate to erosion rate:

Uplift relative to erosionSlope formPenck’s term
accelerating (waxing development)convex slopesaufsteigende Entwicklung
uniformstraight slopesgleichförmige Entwicklung
decelerating (waning development)concave slopesabsteigende Entwicklung

Slopes retreat by replacement from below: a gentler segment grows at the foot and consumes the steeper one above. The end form is a low surface of gentle slopes, the Endrumpf. Penck’s Primärrumpf is the initial low-relief surface on which uplift begins.

Lester King (1953, Canons of Landscape Evolution)

King argued from southern Africa that hillslopes have four elements (waxing crest, free face, debris slope, waning pediment) and that the free face and debris slope retreat parallel to themselves. Pediments grow at the expense of uplands and coalesce into a pediplain, with residual inselbergs. King held that pediplanation is the norm in all climates, not only semi-arid ones.

Hack and dynamic equilibrium (1960)

J. T. Hack, following Gilbert, argued that in a region eroding while uplift continues, every slope and channel adjusts so that erosion everywhere equals uplift. The form is then time-independent: relief and slopes stay constant while the whole surface is lowered and replaced. Form depends on rock resistance and process, not on stage. This is the ancestor of modern steady-state topography in active orogens.

Climatic geomorphology

German and French workers (Büdel, Tricart and Cailleux) argued that each climate zone has its own assemblage of processes and landforms. Peltier (1950) defined morphogenetic regions by mean annual temperature and rainfall (see the table under landforms and climate). Büdel’s model of double planation surfaces explains tropical plains: deep chemical weathering lowers a basal weathering front while wash lowers the surface; stripping the regolith exposes an etchplain with inselbergs.

The quantitative revolution

WorkerContribution
R. E. Horton (1945)quantitative drainage basin morphometry; laws of stream numbers and lengths; infiltration-excess (Hortonian) overland flow
A. N. Strahler (1950s)stream ordering; hypsometric analysis; dynamic basis of geomorphology (forces and stresses)
L. B. Leopold, M. G. Wolman, J. P. Miller (1950s–60s)hydraulic geometry; channel patterns; magnitude–frequency of geomorphic work (Wolman and Miller, 1960)
R. J. Chorley (1962)systems approach; open systems
S. A. Schumm and R. W. Lichty (1965)time, space and causality: which variables are independent depends on the time span considered
S. A. Schumm (1970s)geomorphic thresholds and complex response

Process Geomorphology

Process geomorphology measures driving and resisting forces and the rates of change, and explains form as an adjustment to process.

Geomorphic systems

Chorley and Kennedy (1971) classified physical-geography systems:

SystemDescriptionExample
Morphologicalcorrelated form propertiesslope angle versus regolith thickness
Cascadingflows of mass or energy through linked storesthe hillslope sediment cascade; the hydrological cycle
Process–responsemorphological + cascading; form and process adjust to each otherchannel width adjusting to discharge
Controlprocess–response with human interventiona dammed river

Most geomorphic systems are open: they exchange mass and energy with their surroundings.

  • Negative feedback damps change and keeps a system near equilibrium. A river that steepens by aggradation flows faster and erodes the excess.
  • Positive feedback amplifies change. Gully growth concentrates more flow into the gully, which grows faster.

Types of equilibrium

TypeBehaviour of the variable through time
Staticno change (a boulder at rest)
Stablereturns to the original state after a disturbance
Unstablemoves to a new state after a small disturbance
Metastablestable until a threshold is crossed, then moves to a new state
Steady-statefluctuates about a constant mean
Thermodynamicruns down toward maximum entropy (Davis’s peneplain)
Dynamicfluctuates about a mean that itself trends through time
Dynamic metastabletrending mean, punctuated by threshold jumps

Time scales (Schumm and Lichty, 1965)

Time spanNameLandscape state
millions of yearscyclic timeprogressive change; relief declines (a Davisian view)
hundreds to thousands of yearsgraded timedynamic equilibrium: mean form constant, short-term fluctuations
days to yearssteady timetrue steady state; form effectively constant

Their central point: a variable that is dependent at one time scale (channel form, adjusting to discharge over graded time) is independent at a shorter one (channel form is fixed during a single flood).

Thresholds and complex response

A geomorphic threshold is a condition at which the landform or process changes abruptly.

  • Extrinsic threshold: crossed because an external variable changes: climate, base level, land use.
  • Intrinsic threshold: crossed with no change in external conditions, as the system itself evolves. A valley floor slowly steepens by sediment storage until it fails by gullying; a meander grows until it cuts off.

Complex response (Schumm’s experiments in a drainage-basin flume): a single base-level fall triggers a sequence of incision, upstream sediment release, downstream aggradation and renewed incision. One cause can give several terraces, so counting terraces does not count climatic events.

Magnitude and frequency (Wolman and Miller, 1960)

The geomorphic work (sediment moved) done by events of a given size is the product of the work per event and the frequency of such events. Small events are frequent but each does little; extreme events do a lot but are rare. Wolman and Miller argued that most sediment is moved by events of moderate magnitude that recur relatively often, typically about once or twice a year, close to bankfull discharge. Exceptions: in arid and steep mountain catchments, rare large floods and landslides can dominate.

$$\boxed{W_{\text{total}} = \sum_i f_i \times w_i}$$

where \( f_i \) is the number of events per year in class \( i \) and \( w_i \) the work per event.

Landscape sensitivity and relaxation

  • Reaction time: delay before a system responds to a disturbance.
  • Relaxation time: time taken to reach a new equilibrium after the response begins.
  • Landscape sensitivity (Brunsden and Thornes, 1979): the likelihood that a given change produces a sensible, recognisable and persistent response. If relaxation is slower than the recurrence of disturbances, the landscape never reaches equilibrium and is dominated by transient forms.

Hypsometric analysis

The hypsometric curve of a basin plots relative area above a height (\( a/A \)) against relative height (\( h/H \)). The area under it, the hypsometric integral (HI), is the fraction of the original upland volume still to be eroded. It is estimated by the elevation–relief ratio (Pike and Wilson, 1971):

$$\boxed{E \approx \text{HI} = \frac{\bar{z} - z_{\min}}{z_{\max} - z_{\min}}}$$

Strahler’s interpretation, widely quoted:

HICurve shapeStage
above about 0.6convexyouthful, inequilibrium
about 0.35–0.6S-shapedmature, equilibrium
below about 0.35concaveold (monadnock phase)

Modern work reads high HI as a sign of active uplift or resistant rock rather than of “youth” in the Davisian sense. The global hypsometric curve of land and ocean floor is on Ocean Floor and Sea Water.

Landforms and Climate

Climate controls landforms through temperature (freeze–thaw, chemical reaction rate, ice) and moisture (runoff, vegetation cover, weathering). Vegetation is the key link: it protects the soil from rain splash and wash.

Morphogenetic regions (after Peltier, 1950)

RegionClimateDominant processesTypical forms
Glacialvery coldglacial erosion, nivation, windcirques, U-valleys, moraines
Periglacialcold, freeze–thawfrost action, solifluction, running waterpatterned ground, pingos, ice wedges, blockfields
Borealcold, moderate rainmoderate frost action, running water
Maritimemild, wetrunning water, mass movement
Selvahot, very wetchemical weathering, mass movement, slope washdeep regolith, landslide scars
Moderatetemperaterunning water, creepgraded, smooth slopes
Savannahot, seasonal rainchemical weathering, sheetwash, wind in dry seasoninselbergs, etchplains, duricrusts (laterite)
Semi-aridwarm, low rainrunning water (flash floods), mass movement, windpediments, badlands, alluvial fans
Aridvery drywind, occasional running waterdunes, playas, bajadas, desert pavement

Peltier’s boundaries are fixed in temperature–rainfall space; quote the region names and process emphasis rather than exact numbers.

Climate and erosion rate

The Langbein–Schumm (1958) relation for the USA shows sediment yield peaking in semi-arid climates. With little rain there is little runoff; with much rain dense vegetation protects the surface. Semi-arid lands have enough rain for intense runoff but too little for protective cover. Mountain relief and land use often override this pattern.

Climatic landform assemblages

ClimateSignature landforms and deposits
Humid tropicsdeep saprolite (tens of metres), laterite and bauxite crusts, inselbergs / bornhardts, etchplains, rounded convex hills, landslides on steep slopes
Arid and semi-aridpediments (gently sloping rock surfaces at mountain fronts), bajadas (coalesced fans), playas, calcrete and gypcrete, dunes, desert pavement, badlands
Periglacialpermafrost features: ice wedges, pingos, patterned ground (stone circles, polygons), solifluction lobes, cryoplanation terraces, thermokarst
Glacialcirques, troughs, fjords, moraines, drumlins, eskers
Humid temperatesmooth convexo-concave slopes, creep-dominated, graded valleys; extensive relict glacial and periglacial forms from the Pleistocene

Tors are given a two-stage origin by Linton (1955): deep chemical weathering along joints under a warm, humid climate, followed by stripping of the decomposed rock (grus), leaving the core stones as tors. A one-stage periglacial origin (frost shattering and solifluction) has also been argued. Part C likes this as an example of equifinality.

Landforms and Rock Type

Lithology controls landforms through resistance: mineral stability, cementation, porosity and permeability, and joint density. Gilbert’s law of structure: hard rocks stand up as ridges and scarps, soft rocks are worn into valleys and lowlands (differential erosion).

RockBehaviourTypical landforms
Granitemassive, widely jointed; weathers to grustors, bornhardts / inselbergs, exfoliation domes, boulder fields, spheroidal weathering
Basalt (flood basalt)layered flows of differing resistance; columnar jointsstepped (trap) topography, mesas and buttes, plateau escarpments (the Deccan, the Western Ghats scarp)
Limestone and dolomitesolublekarst: dolines, caves, dry valleys, poljes, tower karst
Sandstoneresistant if well cemented; permeablecliffs, mesas, arches, cuestas; low drainage density
Quartzitevery resistantstrike ridges and hogbacks (the Delhi quartzite ridges)
Shale and clayweak, impermeablelow ground, gentle slopes, badlands, landslides; high drainage density
Unconsolidated alluvium and loessweak, erodiblegullies and ravines (the Chambal ravines are cut in alluvium)

Permeability and drainage density. Permeable rocks (sandstone, chalk, limestone) absorb rain, so they have low drainage density and dry valleys. Impermeable rocks (shale, clay) shed it as runoff and develop high drainage density and badlands.

Landforms and Structure

Structure means the arrangement of rocks: dip, folds, faults and joints. It controls landforms most clearly where resistant and weak beds alternate.

Horizontal and dipping beds

DipLandformDescription
horizontalplateau, mesa, butteflat cap of resistant rock; mesa is broader than high, butte higher than broad; stepped canyon walls
gentlecuestaasymmetric ridge: a steep scarp face cut across the beds and a long gentle dip slope
steephogbacksharp, nearly symmetric ridge with both slopes steep
verticalstrike ridgenarrow wall-like ridge

The width of a bed’s outcrop on flat ground depends on its thickness \( t \) and dip \( \delta \):

$$\boxed{w = \frac{t}{\sin\delta}}$$

so gently dipping resistant beds have wide outcrops and give cuestas with long dip slopes; steeply dipping beds give narrow hogbacks.

Folded structures

  • Anticlines and synclines first form ridges and valleys respectively.
  • Inverted relief: once erosion breaches the resistant layer on an anticlinal crest, the weak core erodes fast to form an anticlinal valley, while the syncline’s resistant layer, compressed and protected, stands up as a synclinal ridge.
  • Ridge-and-valley topography with trellis drainage is typical of eroded folded sedimentary belts (the Appalachians; parts of the Siwaliks and Lesser Himalaya).
  • Water gap: a river gorge through a ridge. Wind gap: an abandoned water gap after river capture.
  • Domes and basins give circular outcrops: hogback rings around an eroded dome, radial and annular drainage.

Faulted structures

FeatureMeaning
Fault scarpa scarp made directly by fault movement
Fault-line scarpa scarp made by differential erosion along a fault; resequent if it faces the same way as the original scarp, obsequent if it faces the opposite way
Triangular facetstruncated spurs along an active normal-fault front
Horst and grabenuplifted and down-dropped blocks: block mountains and rift valleys (the Narmada and Son valleys follow faults)
Offset streams, shutter ridges, sag pondsstrike-slip faults

Tectonic landforms and neotectonics belong to the Quaternary geology unit; here the point is recognition.

Drainage patterns as structural indicators

PatternStructure it suggests
Dendritic (tree-like)uniform resistance, no strong structural control: horizontal beds, massive crystalline rocks
Trellisalternating hard and soft beds in folded or tilted strata; long subsequent streams along strike, short tributaries
Rectangularright-angled joints or faults
Radial (centrifugal)dome or volcanic cone (Amarkantak region is a classic radial centre in India)
Centripetalbasin or crater
Annulareroded dome with concentric hard and soft rings
Paralleluniform steep slope or parallel landforms
Derangedrecently glaciated, disorganised surface with lakes and swamps

Rivers that cross structure

  • Antecedent drainage: the river existed before the uplift and kept cutting down as the structure rose across its path. The Indus, Sutlej and Brahmaputra (Siang) gorges across the Himalaya are standard examples.
  • Superimposed (superposed) drainage: the river formed on a cover that has since been removed, and it has been let down onto older structures beneath, crossing them discordantly.
  • Stream types relative to the original slope: consequent (follows the initial slope), subsequent (develops along weak beds, along strike), obsequent (flows opposite to the dip), resequent (flows with the dip but developed later), insequent (no evident control).
graph TD
    A["Landform"] --> B["Structure: dip, folds, faults, joints"]
    A --> C["Rock type: resistance, permeability"]
    A --> D["Climate: process suite"]
    A --> E["Time: stage, inheritance"]
    B --> F["cuestas, hogbacks, trellis drainage, fault scarps"]
    C --> G["tors, karst, badlands, trap steps"]
    D --> H["inselbergs, pediments, periglacial forms"]
    E --> I["polycyclic and relict forms"]

Memory Tricks

Don’t Confuse

ThisvsThat
Peneplain (Davis): downwearing, slopes declinePediplain (King): backwearing, slopes retreat parallel
Monadnock: residual on a peneplainInselberg: steep residual on a pediplain or etchplain
Steady-state equilibrium: fluctuates about a constant meanDynamic equilibrium (Chorley and Kennedy): fluctuates about a trending mean
Hack’s “dynamic equilibrium”: time-independent formChorley and Kennedy’s “dynamic equilibrium”: changing mean. Same words, different meanings
Extrinsic threshold: external changeIntrinsic threshold: internal evolution, no external change
Fault scarp: made by fault movementFault-line scarp: made by erosion along a fault
Antecedent river: older than the upliftSuperimposed river: let down from a vanished cover
Pediment: rock surface at a mountain footBajada: coalesced alluvial fans (deposits)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which three factors define landforms in Davis’s cycle?
  2. Which model has hillslopes retreating parallel to themselves to produce a pediplain?
  3. What is equifinality?
Answers
  1. Structure, process and stage.
  2. Lester King’s pediplanation model.
  3. The idea that different processes or histories can produce similar landforms, so form alone may not identify origin.

Level 2: Part B Style

Practice Q1. A channel’s mean width fluctuates from year to year, but its average over decades slowly increases as the catchment’s sediment supply declines. In the Chorley–Kennedy classification, this is:

(a) static equilibrium (b) steady-state equilibrium (c) dynamic equilibrium (d) unstable equilibrium

Answer: (c) dynamic equilibrium

Short-term fluctuations about a trending mean define dynamic equilibrium. Steady-state equilibrium would have a constant mean; static equilibrium has no fluctuation; unstable equilibrium moves away to a new state after a small disturbance.

Practice Q2. Deep chemical weathering, inselbergs, etchplains and lateritic duricrusts characterise which of Peltier’s morphogenetic regions?

(a) periglacial (b) savanna (c) arid (d) maritime

Answer: (b) savanna

Hot climates with seasonal rain combine deep chemical weathering with sheetwash stripping in the dry season, exposing inselbergs and etchplains and forming laterite. Arid regions are wind- and flash-flood-dominated; periglacial regions are frost-dominated.

Practice Q3. A map shows long parallel strike ridges with subsequent streams in the valleys and short tributaries joining them at right angles. The most likely structure is:

(a) a granite batholith (b) horizontal flood basalts (c) folded alternating sandstone and shale (d) a young volcanic cone

Answer: (c)

This is a trellis pattern: subsequent streams follow weak beds along strike between resistant ridges, typical of folded or tilted alternating strata. A batholith and flat basalts give dendritic patterns; a volcanic cone gives radial drainage.

Practice Q4. A basin has \( z_{\min} = 150 \) m, \( z_{\max} = 2{,}150 \) m and mean elevation 1,550 m. Its elevation–relief ratio and Strahler interpretation are:

(a) 0.30, old (b) 0.70, youthful (inequilibrium) (c) 0.72, old (d) 0.50, mature

Answer: (b) 0.70, youthful

\( E = (1550 - 150)/(2150 - 150) = 1400/2000 = 0.70 \). Above about 0.6 the curve is convex: a youthful, inequilibrium basin in Strahler’s scheme (or, in modern terms, one with much upland volume left, often from active uplift).

Level 3: Part C Style

Practice Q5. Sediment records from a gauged mountain river give the following event classes:

ClassReturn frequencySediment per event (t)
P10 per year500
Q1 per year12,000
Ronce in 5 years50,000
Sonce in 50 years1,500,000

Which statements are correct?

  1. Class Q moves more sediment in the long run than class P.
  2. Class S moves the most sediment in the long run.
  3. Classes Q and R together move more than half of the long-term load.
  4. The data support the Wolman–Miller view for this river.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1 and 3 only (d) 1, 3 and 4 only

Answer: (a) 1 and 2 only

Annual work: P \( = 10\times 500 = 5{,}000 \); Q \( = 12{,}000 \); R \( = 0.2\times 50{,}000 = 10{,}000 \); S \( = 0.02\times 1{,}500{,}000 = 30{,}000 \) t yr\(^{-1}\). Total \( 57{,}000 \).

  • 1 true: 12,000 > 5,000.
  • 2 true: S, at 30,000 t yr\(^{-1}\), is the largest (53%).
  • 3 false: Q + R = 22,000, which is 39%.
  • 4 false: the rare extreme events dominate here, as they can in steep mountain catchments. Wolman and Miller predicted moderate, frequent events would dominate.

Practice Q6. Which statements about landscape-evolution models are correct?

  1. In Davis’s cycle, relief is greatest at maturity.
  2. Penck associated accelerating uplift with concave slopes.
  3. King’s pediments grow by parallel retreat of the scarp and debris slope.
  4. Hack’s dynamic equilibrium predicts time-independent forms when erosion balances uplift.

(a) 1, 3 and 4 only (b) 2 and 3 only (c) 1 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 3 and 4 only
  • 1 true: valleys deepened and divides sharpened; relief peaks at maturity.
  • 2 false: accelerating (waxing) uplift gives convex slopes; waning uplift gives concave ones.
  • 3 true: free face and debris slope retreat parallel, leaving an expanding pediment.
  • 4 true: that is the core of Hack’s argument.

Practice Q7. On a flat plain, two resistant beds outcrop. Bed X is 30 m thick and dips 3°; bed Y is 30 m thick and dips 30°. Which statements are correct?

  1. The outcrop of X is about 570 m wide.
  2. The outcrop of Y is 60 m wide.
  3. X is more likely to form a cuesta and Y a hogback.
  4. If the beds were vertical, both outcrops would be 30 m wide.

(a) 1 and 3 only (b) 1, 2, 3 and 4 (c) 2 and 4 only (d) 1, 2 and 3 only

Answer: (b) 1, 2, 3 and 4

\( w = t/\sin\delta \).

  • 1 true: \( 30/\sin 3° = 30/0.0523 = 573 \) m.
  • 2 true: \( 30/\sin 30° = 30/0.5 = 60 \) m.
  • 3 true: gentle dip, wide dip slope, cuesta; steep dip, narrow sharp ridge, hogback.
  • 4 true: at 90°, \( \sin\delta = 1 \), so the width equals the thickness.

Quick Revision Table

IdeaFact
Uniformitarianismsame processes, not necessarily the same rates
Playfair’s lawaccordant tributary junctions
Base levelPowell (1875); sea level is the ultimate base level
Gilbert (1877)laws of declivities, structure, divides; grade
Davis (1899)structure, process, stage; youth, maturity (maximum relief), old age; peneplain, monadnocks
Penck (1924)uplift/erosion ratio; waxing gives convex, waning gives concave; Endrumpf
King (1953)parallel retreat; pediment, pediplain, inselbergs
Hack (1960)dynamic equilibrium, time-independent form
Schumm and Lichty (1965)cyclic, graded, steady time; dependence of variables changes with time scale
Thresholdsextrinsic vs intrinsic; complex response
Wolman and Miller (1960)work = frequency × magnitude; moderate floods dominate
Hypsometric integral\( E = (\bar{z} - z_{\min})/(z_{\max} - z_{\min}) \); above 0.6 young, 0.35–0.6 mature, below 0.35 old
Peltier (1950)morphogenetic regions from temperature and rainfall
Langbein–Schumm (1958)sediment yield peaks in semi-arid climates
TorsLinton’s two-stage origin; equifinality
Structureplateau, mesa, butte; cuesta (gentle), hogback (steep); inverted relief
Outcrop width\( w = t/\sin\delta \)
Drainagedendritic, trellis, rectangular, radial, annular, centripetal, parallel, deranged

Key Takeaways

What’s Next