Skip to content

Paleomagnetism, Sea-Floor Spreading and Plate Tectonics

CSIR NET Earth Sciences: remanence, paleolatitude, VGPs and polar wander, magnetic stripes, spreading rates, plate boundaries, Euler poles, hotspots, forces.

  • 26 min read
  • Updated
On this page · 13 sections
  1. Prerequisites
  2. The Hook: Stripes on the Sea Floor
  3. Paleomagnetism
  4. Continental Drift: The Evidence
  5. Sea-Floor Spreading
  6. Plate Tectonics
  7. Memory Tricks
  8. Don’t Confuse
  9. Common Mistakes
  10. Practice
  11. Quick Revision Table
  12. Key Takeaways
  13. What’s Next

Prerequisites

The Hook: Stripes on the Sea Floor

Paleomagnetism

What a rock records

A rock’s natural remanent magnetisation (NRM) is the sum of all remanences it carries: a primary one acquired when it formed (thermoremanent in lavas, detrital in sediments, chemical in some red beds) plus secondary ones added later (viscous overprints, chemical alteration, lightning). The minerals and remanence types are summarised on the geomagnetism page; the key points for paleomagnetism are:

  • A grain’s moment becomes fixed when it cools through its blocking temperature, which is at or below the mineral’s Curie temperature (about 580 °C for magnetite, about 675 °C for hematite).
  • The Koenigsberger ratio \( Q = \) remanent / induced magnetisation. Oceanic basalts have high \( Q \), so their magnetic anomalies are dominated by remanence, which is what makes sea-floor stripes possible.

Laboratory procedure

  1. Sampling: oriented cores from several sites, several samples per site, to average out secular variation.
  2. Stepwise demagnetisation removes secondary components, softest first:
    • alternating-field (AF) demagnetisation (suits magnetite),
    • thermal demagnetisation (suits hematite and goethite; also separates components by blocking temperature).
  3. Vector analysis on orthogonal vector (Zijderveld) diagrams: straight-line segments that trend to the origin define the characteristic remanent magnetisation (ChRM).
  4. Statistics: directions are averaged with Fisher statistics; the 95% confidence cone \( \alpha_{95} \) measures precision.

Field tests of stability

TestLogicA pass means
Fold testcompare directions before and after “untilting” the bedsdirections cluster better after untilting → magnetisation predates folding
Conglomerate testclasts of the rock in a younger conglomeraterandom clast directions → magnetisation of the source rock stable since the conglomerate formed
Baked-contact testcountry rock heated by an intrusionbaked zone shares the intrusion’s direction, unbaked rock differs → the intrusion’s remanence is primary
Reversal testnormal and reversed directions in one unitthey are antiparallel → secondary overprints removed

The geocentric axial dipole (GAD) hypothesis

Averaged over a few thousand to tens of thousands of years, secular variation cancels and the field is close to a dipole at the centre of the Earth aligned with the rotation axis. Then the magnetic and geographic poles coincide, and

$$\boxed{\tan I = 2\tan\lambda}$$

gives the paleolatitude \( \lambda \) of a site from the mean inclination \( I \). Declination \( D \) gives the rotation of the block about a vertical axis since the rock formed.

Polarity also matters: a reversed field gives a direction pointing the opposite way. For old rocks, deciding which hemisphere a continent was in depends on knowing the polarity, so it can be ambiguous.

Virtual geomagnetic poles

The virtual geomagnetic pole (VGP) is the pole position of a geocentric dipole that would produce the observed direction at the site. With site latitude \( \lambda_s \), longitude \( \phi_s \):

  1. Magnetic colatitude: \( \tan I = 2\cot p \), i.e. \( p = 90° - \lambda \).
  2. Pole latitude: \( \sin\lambda_p = \sin\lambda_s\cos p + \cos\lambda_s\sin p\cos D \).
  3. Longitude difference: \( \sin\beta = \dfrac{\sin p\sin D}{\cos\lambda_p} \); then \( \phi_p = \phi_s + \beta \) if \( \cos p \geq \sin\lambda_s\sin\lambda_p \), otherwise \( \phi_p = \phi_s + 180° - \beta \).

The VGP is the point reached by travelling an angular distance \( p \) from the site along azimuth \( D \).

Apparent polar wander

VGPs averaged over enough time to remove secular variation give a paleomagnetic pole. Plotting paleomagnetic poles of different ages from one continent gives an apparent polar wander path (APWP). Since the pole itself (the rotation axis) stays put in the GAD model, the “wander” is really the continent moving.

The decisive argument (1950s, Runcorn, Irving and others): Europe and North America give two different APWPs of similar shape for the Paleozoic–Mesozoic. There was only one pole at any time, so the continents must have moved relative to each other. Closing the Atlantic brings the two paths into coincidence.

Paleomagnetic results from Indian rocks, including the Deccan Traps, record India’s large northward movement since the Cretaceous, from southern latitudes to its present position, and its rapid drift before collision with Asia.

Continental Drift: The Evidence

Wegener presented continental drift in 1912 and in his book Die Entstehung der Kontinente und Ozeane (1915). He proposed a supercontinent, Pangaea, which began to break apart in the Mesozoic.

Line of evidenceExample
Fit of continentsbest at the continental slope, not the coastline (Bullard and colleagues fitted the Atlantic continents by computer in 1965)
FossilsGlossopteris flora across India, Africa, South America, Australia and Antarctica; the reptiles Mesosaurus (South America and southern Africa), Lystrosaurus and Cynognathus
Matching geologyPrecambrian shields and Paleozoic fold belts that continue across the Atlantic (for example, the Caledonian–Appalachian belt)
PaleoclimatePermo-Carboniferous glacial deposits (tillites) and striations in now-tropical India, Africa and South America, with ice-flow directions that make sense only when the continents are reassembled around the South Pole; coal and evaporite belts
Paleomagnetism (1950s)separate APWPs that merge when the continents are reassembled

Gondwana (the southern supercontinent: South America, Africa, Madagascar, India, Antarctica, Australia) and Laurasia (North America, Europe, Asia) were the two halves of Pangaea, separated by the Tethys ocean. The Gondwana rocks of peninsular India (coal-bearing Permian–Triassic sequences with Glossopteris) gave the supercontinent its name.

What drift lacked was a mechanism; Wegener’s own proposals (tidal and pole-fleeing forces) were far too weak. Arthur Holmes suggested mantle convection in the late 1920s and 1930s, but evidence from the ocean floor was needed.

Sea-Floor Spreading

The hypothesis

Harry Hess (in a paper published in 1962) and Robert Dietz (who coined the term “sea-floor spreading” in 1961) proposed that:

  • new oceanic lithosphere forms at mid-ocean ridges, where hot mantle rises and melts;
  • it moves away on both sides and cools;
  • it is consumed at ocean trenches, where it sinks back into the mantle;
  • so the ocean floor is young and continuously recycled, while continents, too buoyant to sink, survive and are carried along.

Observations it explains

ObservationExplanation
Mid-ocean ridges: a global mountain chain, about 65,000 km long, often with a central rift valleyupwelling and extension
High heat flow and shallow, mostly normal-fault earthquakes at ridgeshot new lithosphere under tension
Ocean depth increases with distance from the ridge (about \( 2500 + 350\sqrt{t} \) m)lithosphere cools and contracts as it ages (see the isostasy page)
Sediment is thin at ridges and thickens away from them; the oldest sediment above basement gets older away from the ridgethe floor is older farther from the ridge (confirmed by the Deep Sea Drilling Project from 1968)
No oceanic crust older than about 180 Ma (Jurassic) in place in the major oceansold floor has been subducted
Symmetric magnetic stripesVine–Matthews (below)
Trenches with dipping seismic zones (Wadati–Benioff zones)lithosphere sinks there

Magnetic anomalies: the Vine–Matthews–Morley hypothesis

When magnetometer surveys (for example, the survey off the western United States published by Raff and Mason in 1961) mapped the ocean floor, they found linear magnetic anomalies, alternately positive and negative, parallel to the ridges and offset by fracture zones. The Vine–Matthews–Morley explanation:

  1. Basalt erupted at the ridge axis cools through its Curie temperature and acquires TRM parallel to the field at that time.
  2. Spreading carries it away while new basalt forms at the axis.
  3. When the field reverses, the new crust is magnetised the other way.
  4. Normally magnetised crust adds to today’s field (positive anomaly); reversely magnetised crust subtracts from it (negative anomaly).
  5. The pattern is symmetric about the ridge axis, and its spacing is proportional to spreading rate.

Profiles across the Reykjanes Ridge south of Iceland and the Pacific–Antarctic Ridge, published in the mid-1960s, showed the predicted mirror symmetry and matched the reversal time scale being built from dated lavas on land. That match converted most geophysicists.

graph TD
    A[Magma rises at ridge axis] --> B[Basalt cools below Curie temperature]
    B --> C[Records field polarity at the time]
    C --> D[Spreading carries crust away symmetrically]
    D --> E[Field reverses: next strip has opposite polarity]
    E --> F[Symmetric stripes; width proportional to spreading rate]

The geomagnetic polarity time scale

Polarity intervals are dated on land by K–Ar and Ar–Ar ages of lavas and extended back through the oceans’ anomaly sequence. Long intervals of one polarity are chrons (named Brunhes, Matuyama, Gauss and Gilbert for the last few million years, and numbered C1, C2, … for older ones); short intervals inside them are subchrons (e.g. Jaramillo, Olduvai). Key boundaries:

BoundaryAge (approx.)
Brunhes (normal) / Matuyama (reversed)0.78 Ma
Matuyama / Gauss (normal)2.58 Ma (base of the Quaternary)
Gauss / Gilbert (reversed)about 3.6 Ma
Cretaceous Normal Superchronroughly 121 to 84 Ma, no reversals

Because the anomaly sequence is a unique bar code, a single magnetic profile can be dated by matching its pattern to the time scale. This is the most widely used way of dating ocean floor.

Spreading rates

$$\boxed{\text{half rate} = \frac{\text{distance of anomaly from axis}}{\text{age}}} \qquad \boxed{\text{full rate} = \text{sum of the half rates on both flanks}}$$

1 km Myr\(^{-1}\) = 1 mm yr\(^{-1}\) = 0.1 cm yr\(^{-1}\).

ClassFull rateExampleAxis morphology
Ultraslowunder about 2 cm yr\(^{-1}\)Gakkel Ridge (Arctic), Southwest Indian Ridgedeep rift, sparse volcanism, exposed mantle
Slowabout 2–5 cm yr\(^{-1}\)Mid-Atlantic Ridgeaxial rift valley, rugged flanks
Intermediateabout 5–9 cm yr\(^{-1}\)Southeast Indian Ridge, Juan de Fuca Ridgetransitional
Fastover about 9 cm yr\(^{-1}\), up to about 15 or moreEast Pacific Riseaxial high, smooth flanks

Spreading can be asymmetric (different half rates on the two flanks) and ridges can jump. Fast ridges are hotter and stand higher near the axis; slow ridges have more faulting and thinner, more variable crust.

Plate Tectonics

The theory

Between 1965 and 1968 sea-floor spreading, transform faults and global seismicity were combined into plate tectonics (key papers by J. T. Wilson, W. J. Morgan, D. McKenzie and R. L. Parker, X. Le Pichon, and B. Isacks, J. Oliver and L. Sykes). Its statements:

  1. The lithosphere is divided into a small number of large, rigid plates (plus many microplates) that move over the weaker asthenosphere.
  2. Deformation, earthquakes and most volcanism are concentrated at plate boundaries.
  3. Plate motion on a sphere is a rotation about an Euler pole.
  4. Surface area is conserved: lithosphere created at ridges is consumed at trenches.

The major plates are the Pacific, North American, South American, Eurasian, African, Antarctic and Indo-Australian (often split into the Indian and Australian plates, with a diffuse boundary between them in the central Indian Ocean). The Pacific is the largest. Smaller plates include the Nazca, Cocos, Caribbean, Philippine Sea, Arabian, Juan de Fuca and Scotia plates.

Plate boundaries

BoundaryMotionLithosphereFeaturesEarthquakesExamples
Divergent (constructive)apartcreatedridges, rift valleys, continental rifts, basaltic volcanismshallow, normalMid-Atlantic Ridge, East African Rift, Red Sea
Convergent: ocean–oceantogetherdestroyedtrench, island arc, back-arc basinshallow to deep; megathrustMariana, Tonga, Japan, Andaman
Convergent: ocean–continenttogetherdestroyedtrench, accretionary prism, continental (Andean) arc, andesitic volcanismshallow to deepAndes, Cascades
Convergent: continent–continenttogetherthickened, not subducted (buoyant)collision orogen, thick crust, suture with ophiolites, no arc volcanism after collisionshallow, distributedHimalaya–Tibet, Alps
Transform (conservative)sidewaysconservedtransform faults, fracture zonesshallow, strike-slipSan Andreas, oceanic transforms

Subduction-zone anatomy (from ocean to arc): outer rise → trench → accretionary prism → forearc basin → volcanic arc (roughly above where the slab is about 100 km deep, where dehydration of the slab lowers the melting point of the mantle wedge) → back-arc (extensional in some arcs). Paired metamorphic belts form: high-pressure, low-temperature (blueschist) rocks near the trench and high-temperature, low-pressure rocks under the arc.

Ophiolites are slices of oceanic lithosphere thrust onto continents, usually at sutures. A complete sequence, from top to bottom: deep-sea sediments (chert), pillow basalts, sheeted dyke complex, gabbro (layered at the base), and mantle peridotite (harzburgite). Ophiolites along the Indus–Tsangpo suture zone mark where Tethyan ocean floor closed between India and Asia.

Transform faults

J. Tuzo Wilson (1965) recognised transform faults as a third kind of boundary: strike-slip faults that end abruptly where they meet another boundary (ridge or trench), transforming one kind of motion into another.

  • Along a ridge–ridge transform, the sense of slip is opposite to the sense suggested by the offset of the ridge. A ridge offset to the right looks like dextral offset, but the active transform slips sinistrally. First-motion studies by Sykes (1967) confirmed this prediction.
  • The transform is active only between the ridge segments. Beyond them, the fracture zone is an inactive scar where both sides move together; it has an age step but no earthquakes.
  • The offset does not grow with time; it is set when the ridge first forms.
  • Transforms lie along small circles about the Euler pole, which is how poles are located.

Triple junctions

Where three plates meet is a triple junction. Boundaries are labelled R (ridge), T (trench) and F (transform fault). McKenzie and Morgan (1969) showed that a junction is stable (keeps its geometry over time) only for certain combinations and orientations. The RRR junction is stable for all geometries; others, such as FFF, are never stable, and many (e.g. RTF, TTT) are stable only in special configurations. Unstable junctions migrate and change the plate configuration. Examples of RRR junctions are Afar (involving continental rifts) and Rodrigues in the Indian Ocean.

Motion on a sphere: Euler poles

By Euler’s fixed-point theorem, any displacement of a rigid cap on a sphere is a rotation about an axis through the centre. The axis cuts the surface at the Euler pole. If plate B rotates relative to plate A with angular speed \( \omega \), the relative speed at a point at angular distance \( \Delta \) from the Euler pole is

$$\boxed{v = \omega R\sin\Delta}$$

with \( R = 6{,}371 \) km and \( \omega \) in radians per unit time. Consequences:

  • Speed is zero at the Euler pole and maximum 90° from it.
  • Along one boundary the type of boundary can change: the same relative motion is divergent where the boundary is perpendicular to the motion, transform where it is parallel, convergent where it is oblique the other way.
  • Relative motions combine as vectors of angular velocity: \( {}_A\boldsymbol{\omega}_C = {}_A\boldsymbol{\omega}_B + {}_B\boldsymbol{\omega}_C \) (plate circuits).

Measurement. Geological rates (averaged over about 1–3 Myr) come from spreading rates (magnetic anomalies), transform azimuths and earthquake slip vectors; global models such as NUVEL-1 and MORVEL combine them. Present-day motions are measured directly by space geodesy: GPS (GNSS), VLBI and satellite laser ranging. The two agree well, showing that plate motion is steady over millions of years.

Typical speeds are a few cm yr\(^{-1}\), “about as fast as fingernails grow”. India–Eurasia convergence is a few cm yr\(^{-1}\) today; only part of it is taken up across the Himalaya, the rest by deformation in Tibet and beyond.

Hotspots and absolute motion

Relative motions say nothing about how plates move with respect to the deep mantle. Hotspots, long-lived centres of volcanism thought to sit above mantle plumes (Wilson 1963; Morgan 1971), give an approximately fixed reference frame:

  • A plate moving over a hotspot leaves a chain of volcanoes that get older away from the active end. Hawaii is active; the islands and seamounts get older to the northwest along the Hawaiian chain, which bends into the north-trending Emperor seamounts; the bend is about 47 Ma.
  • Rate of plate motion over the hotspot = distance / age difference along the chain.
  • Hotspots are not perfectly fixed: paleomagnetism of the Emperor seamounts shows that the Hawaiian hotspot itself moved south during their formation.

Hotspots and India. The Réunion hotspot is linked to the Deccan Traps (erupted around the Cretaceous–Paleogene boundary, about 66 Ma) and the Chagos–Laccadive Ridge and Mascarene Plateau track. The Kerguelen hotspot is linked to the Rajmahal Traps (Early Cretaceous) and the Ninetyeast Ridge. Large igneous provinces like these are thought to mark plume heads arriving at the base of the lithosphere.

What drives the plates

ForceActsRelative importance
Slab pullweight of the cold, dense sinking slab pulls the plategenerally the largest: plates with long subducting edges move fastest
Ridge pushgravitational sliding off the elevated, cooling lithosphere near ridges (a body force across the whole cooling plate, not at the axis alone)secondary
Trench suctionpulls the overriding plate towards a retreating trenchsecondary
Mantle dragtraction at the base; can drive or resistuncertain sign and size
Collision resistance, transform resistance, slab resistanceoppose motionresisting forces

Forsyth and Uyeda (1975) found that plate speeds correlate with the fraction of the plate boundary that is subducting, and not with plate area or continental area, which points to slab pull. In the modern view, plates are the cold upper boundary layer of mantle convection: they are part of the convecting system, not passive rafts on top of it.

The Wilson cycle

Ocean basins open and close in a cycle (named for J. T. Wilson):

graph LR
    A[Continental rift: East Africa] --> B[Young narrow ocean: Red Sea]
    B --> C[Mature ocean with passive margins: Atlantic]
    C --> D[Subduction begins: shrinking ocean, Pacific]
    D --> E[Closing ocean: Mediterranean]
    E --> F[Continental collision and suture: Himalaya]
    F --> A

Supercontinents assemble and break up over a few hundred million years: Pangaea (late Paleozoic), and before it Rodinia (about 1 Ga) and earlier assemblies such as Columbia (Nuna).

Memory Tricks

Don’t Confuse

ThisvsThat
VGP: pole from one site’s direction (a snapshot)Paleomagnetic pole: average of many VGPs over enough time to remove secular variation
Apparent polar wander: continent moving relative to the poleTrue polar wander: whole solid Earth rotating relative to the spin axis
Transform fault: active, between ridge segmentsFracture zone: inactive extension beyond them
Half rate: one flankFull rate: total opening, sum of both flanks
Continental drift (Wegener): continents movePlate tectonics: lithospheric plates, including ocean floor, move as rigid caps
Relative plate motion (Euler poles)Absolute motion (hotspot or mantle reference frame)
Ridge push: body force from cooling lithosphereSlab pull: weight of the sinking slab
Island arc (ocean–ocean)Continental arc (ocean–continent)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Who explained marine magnetic stripes as a record of sea-floor spreading and field reversals in 1963?
  2. Which kind of plate boundary conserves lithosphere?
  3. What does a positive fold test indicate?
Answers
  1. Vine and Matthews (and, independently, Morley).
  2. Transform (conservative) boundaries.
  3. The magnetisation was acquired before folding: directions cluster better after the beds are restored to horizontal.

Level 2: Part B Style

Practice Q1. A magnetic anomaly boundary dated 4.0 Ma lies 120 km from a ridge axis on each flank. The full spreading rate is:

(a) 1.5 cm yr\(^{-1}\) (b) 3.0 cm yr\(^{-1}\) (c) 6.0 cm yr\(^{-1}\) (d) 30 cm yr\(^{-1}\)

Answer: (c) 6.0 cm/yr

Half rate \( = 120\ \text{km}/4.0\ \text{Myr} = 30 \) km Myr\(^{-1}\) = 3.0 cm yr\(^{-1}\). Both flanks spread at that rate, so the full rate is 6.0 cm yr\(^{-1}\).

(b) is the half rate. (d) treats km Myr\(^{-1}\) as cm yr\(^{-1}\) (1 km Myr\(^{-1}\) = 0.1 cm yr\(^{-1}\)).

Practice Q2. The mean characteristic inclination of a Cretaceous lava sequence is 45°. Assuming a geocentric axial dipole, its paleolatitude was about:

(a) 22.5° (b) 26.6° (c) 45° (d) 63.4°

Answer: (b) 26.6°

\( \tan\lambda = \tan 45°/2 = 0.5 \Rightarrow \lambda \approx 26.6° \). (a) halves the angle instead of its tangent; (c) sets latitude equal to inclination; (d) is \( \tan^{-1}2 \), doubling instead of halving.

Practice Q3. Along an oceanic transform fault joining two ridge segments:

(a) earthquakes occur along the entire fracture zone (b) the sense of slip is opposite to the apparent offset of the ridge (c) the offset between ridge segments grows steadily with time (d) earthquakes are mostly deep-focus thrust events

Answer: (b)

Wilson’s key insight. (a): only the segment between ridge axes is active. (c): the offset stays constant for steady spreading. (d): transform earthquakes are shallow and strike-slip.

Practice Q4. Plate B rotates relative to plate A at 0.6° Myr\(^{-1}\). The relative speed at a boundary point 30° from the Euler pole is about:

(a) 0.3 cm yr\(^{-1}\) (b) 3.3 cm yr\(^{-1}\) (c) 5.8 cm yr\(^{-1}\) (d) 6.7 cm yr\(^{-1}\)

Answer: (b) 3.3 cm/yr

\( v = \omega R\sin\Delta = (0.6\times\pi/180)\times 6371\times\sin 30° \approx 0.01047\times 6371\times 0.5 \approx 33.4 \) km Myr\(^{-1}\) \( \approx 3.3 \) cm yr\(^{-1}\).

(d) is the speed 90° from the pole; (c) uses \( \cos 30° \) instead of \( \sin 30° \).

Level 3: Part C Style

Practice Q5. Paleomagnetic sampling of 66 Ma lavas at a site now at 20°N gives a well-defined mean inclination of \( -30° \) (upward). Independent evidence shows the field was of normal polarity and the continent was in the southern hemisphere. Which statements are correct?

  1. The paleolatitude of the site was about 16°S.
  2. The site has moved at least about 36° of latitude northward since 66 Ma.
  3. The minimum average northward speed is about 6 cm yr\(^{-1}\).
  4. The data also fix how far the continent has moved east or west.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • \( \tan\lambda = \tan(-30°)/2 = -0.2887 \Rightarrow \lambda \approx -16.1° \): 16.1°S. True.
  • Latitude change \( = 20 - (-16.1) = 36.1° \). True. (“At least” because latitude is the only component measured.)
  • Distance \( \approx 36.1\times 111.2 \approx 4{,}015 \) km in 66 Myr \( \approx 60.8 \) km Myr\(^{-1}\) \( \approx 6.1 \) cm yr\(^{-1}\). True, as a minimum average.
  • Statement 4 false: a GAD field gives no longitude information.

Practice Q6. Magnetic-anomaly picks across a ridge, using reversal ages of 0.78 Ma (Brunhes–Matuyama) and 2.58 Ma (Matuyama–Gauss):

BoundaryDistance east of axis (km)Distance west of axis (km)
0.78 Ma19.515.6
2.58 Ma64.551.6

Which statements are correct?

  1. Spreading has been steady on each flank over the last 2.58 Myr.
  2. The full spreading rate is about 4.5 cm yr\(^{-1}\).
  3. Spreading is asymmetric, faster on the eastern flank.
  4. This ridge would be expected to have an axial high and smooth flanks.

(a) 1, 2 and 3 only (b) 2 and 4 only (c) 1 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  • East: \( 19.5/0.78 = 25 \) and \( 64.5/2.58 = 25 \) km Myr\(^{-1}\). West: \( 15.6/0.78 = 20 \) and \( 51.6/2.58 = 20 \) km Myr\(^{-1}\). Each flank is constant over time: statement 1 true.
  • Full rate \( = 25 + 20 = 45 \) km Myr\(^{-1}\) = 4.5 cm yr\(^{-1}\): statement 2 true.
  • East (2.5 cm yr\(^{-1}\)) faster than west (2.0 cm yr\(^{-1}\)): statement 3 true.
  • Statement 4 false: 4.5 cm yr\(^{-1}\) is a slow ridge, expected to have an axial rift valley and rugged flanks; axial highs are typical of fast ridges.

Practice Q7. Consider these statements about plate boundaries and driving forces:

  1. Deep-focus earthquakes (300–700 km) occur at ocean–ocean and ocean–continent convergent boundaries.
  2. Plates attached to long subducting slabs tend to move faster than plates without them.
  3. An RRR triple junction is stable for all orientations of the ridges.
  4. Continental collision zones are marked by andesitic arc volcanism that continues long after collision.

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only
  • 1 true: deep earthquakes occur only within subducting oceanic slabs.
  • 2 true: the Forsyth–Uyeda observation, the main evidence that slab pull dominates.
  • 3 true: McKenzie and Morgan (1969).
  • 4 false: once continents collide, oceanic subduction stops and arc volcanism ends; collision belts show crustal thickening, thrusting and crustal melting (for example, leucogranites in the Himalaya), not continuing arc andesites.

Quick Revision Table

IdeaFact or formula
RemanenceTRM (lavas), DRM (sediments), CRM; ChRM after AF or thermal demagnetisation
Curie temperaturesmagnetite about 580 °C, hematite about 675 °C
Stability testsfold, conglomerate, baked contact, reversal
Paleolatitude\( \tan I = 2\tan\lambda \) (GAD); no longitude
VGPtravel \( p = 90° - \lambda \) from site along azimuth \( D \)
APWPseparate paths for Europe and North America → relative drift
Wegener1912; book 1915; Pangaea, Gondwana, Laurasia, Tethys
Drift evidencefit, Glossopteris, Mesosaurus, matching belts, Permo-Carboniferous tillites
Sea-floor spreadingDietz 1961, Hess 1962; DSDP from 1968
StripesVine–Matthews–Morley 1963; symmetric; width ∝ rate
ReversalsBrunhes–Matuyama 0.78 Ma; Matuyama–Gauss 2.58 Ma; CNS about 121–84 Ma
Oldest ocean floor in placeabout 180 Ma (Jurassic)
Spreading ratesultraslow < 2, slow 2–5, intermediate 5–9, fast > 9 cm yr\(^{-1}\) (full)
Transform faultsWilson 1965; slip opposite apparent offset; fracture zones inactive
Triple junctionsMcKenzie and Morgan 1969; RRR always stable
Euler pole\( v = \omega R\sin\Delta \)
HotspotsHawaii–Emperor bend about 47 Ma; Réunion–Deccan; Kerguelen–Rajmahal–Ninetyeast
Driving forcesslab pull > ridge push; Forsyth and Uyeda 1975
Ophiolitesediment, pillow basalt, sheeted dykes, gabbro, peridotite
Wilson cyclerift → young ocean → mature ocean → subduction → collision

Key Takeaways

What’s Next

Advertisement
Advertisement