Seismology Basics and Earth's Internal Structure
CSIR NET Earth Sciences: P, S and surface waves, elastic moduli, Snell's law, refraction, travel times, shadow zones and Earth's layers to the inner core.
- 22 min
On this page · 14 sections
Prerequisites
- Earth’s bulk composition, the core–mantle split and PREM densities from Meteorites, Earth’s Composition and Differentiation.
- Reflection, refraction and Snell’s law for waves, as in EM Waves: Reflection, Refraction and Polarization. The geometry is the same for seismic rays.
- Gravity, moment of inertia and isostasy from Gravity, Geomagnetism, Heat Flow and Isostasy. Seismology and gravity are checked against each other.
The Hook: Two P Waves from One Earthquake
Elastic Waves in a Solid
Elastic moduli
For small strains, rocks behave as linear elastic solids (Hooke’s law). An isotropic solid needs only two independent constants. The common ones are:
| Modulus | Definition | Note |
|---|---|---|
| Young’s modulus \( E \) | uniaxial stress / longitudinal strain | lateral sides free |
| Shear (rigidity) modulus \( \mu \) | shear stress / shear strain | zero in a fluid |
| Bulk modulus \( K \) | pressure / volumetric strain | incompressibility |
| Poisson’s ratio \( \nu \) | lateral strain / longitudinal strain (sign removed) | 0 to 0.5 for real rocks |
| Lamé’s \( \lambda \) | with \( \mu \), the two constants in the stress–strain law | \( K = \lambda + \frac{2}{3}\mu \) |
Body-wave velocities
Solving the equation of motion for an elastic solid gives two kinds of body wave:
$$\boxed{V_P = \sqrt{\frac{K + \frac{4}{3}\mu}{\rho}} = \sqrt{\frac{\lambda + 2\mu}{\rho}}} \qquad \boxed{V_S = \sqrt{\frac{\mu}{\rho}}}$$- P waves (primary, compressional, longitudinal): particle motion parallel to the direction of travel. They change volume and shape.
- S waves (secondary, shear, transverse): particle motion perpendicular to the direction of travel. They change shape only. An S wave polarised in the vertical plane through the ray is SV, one polarised horizontally is SH.
Because \( \mu = 0 \) in a fluid, S waves cannot travel through liquids, and \( V_P \) in a fluid reduces to \( \sqrt{K/\rho} \). Because \( K > 0 \) and \( \mu \geq 0 \), \( V_P > V_S \) always; in fact \( V_P/V_S \geq \sqrt{4/3} \).
Poisson’s ratio from velocities:
$$\nu = \frac{V_P^2 - 2V_S^2}{2\left(V_P^2 - V_S^2\right)}$$A Poisson solid has \( \lambda = \mu \), which gives \( \nu = 0.25 \) and \( V_P/V_S = \sqrt{3} \approx 1.73 \). Many crustal and mantle rocks are close to this. Partial melt or fluid-filled cracks lower \( V_S \) more than \( V_P \), so a high \( V_P/V_S \) (high \( \nu \)) points to melt or fluids.
Typical velocities
| Material | \( V_P \) (km s\(^{-1}\)) | \( V_S \) (km s\(^{-1}\)) |
|---|---|---|
| Air | 0.33 | 0 |
| Water | about 1.5 | 0 |
| Unconsolidated sediment | about 0.5–2 | low |
| Granite (upper crust) | about 5.5–6.2 | about 3.2–3.6 |
| Basalt and gabbro (lower crust) | about 6.5–7.2 | about 3.7–4.0 |
| Uppermost mantle (peridotite), the Pn speed | about 8.0–8.2 | about 4.5–4.7 |
| Outer core (liquid iron alloy) | about 8–10 | 0 |
Surface waves
Surface waves travel along the free surface. Their energy spreads over a cylinder rather than a sphere, so their amplitude decays more slowly with distance (geometrically as \( 1/\sqrt{r} \) against \( 1/r \) for body waves). They are usually the largest waves on a distant seismogram.
| Wave | Particle motion | Needs | Speed |
|---|---|---|---|
| Rayleigh (R, LR) | retrograde ellipse in the vertical plane of travel (at the surface of a uniform half-space) | a free surface | about \( 0.92\,V_S \) in a Poisson half-space |
| Love (L, LQ) | horizontal, transverse (SH) | a low-velocity layer over a faster half-space | between \( V_S \) of the layer and of the half-space |
Both are dispersive in a layered Earth: longer periods sample deeper, faster rock and so travel faster. Group-velocity dispersion curves are used to find crustal and upper-mantle shear-velocity structure. Love waves usually arrive before Rayleigh waves.
Very large earthquakes set the whole Earth ringing in free oscillations (normal modes). The longest-period spheroidal mode, \( _0S_2 \), has a period of about 54 minutes. Modes constrain density at depth, which travel times alone cannot.
Seismic Rays
Snell’s law and the ray parameter
At a boundary between layers of velocity \( V_1 \) and \( V_2 \), with angles measured from the normal:
$$\boxed{\frac{\sin i_1}{V_1} = \frac{\sin i_2}{V_2} = p}$$\( p \) is the ray parameter (horizontal slowness). It stays constant along the whole ray in a flat-layered Earth. In a spherical Earth the conserved quantity is
$$\boxed{p = \frac{r\sin i}{V(r)}}$$At the deepest point of a ray (the turning point) the ray is horizontal, \( i = 90° \), so \( p = r_t/V(r_t) \). A ray that leaves the surface more steeply (smaller \( p \)) turns deeper.
A P wave hitting a boundary at a non-normal angle generally produces four waves: reflected P and SV, and transmitted P and SV (mode conversion). SH waves convert only to SH.
Critical angle and head waves
When \( V_2 > V_1 \), the transmitted ray bends away from the normal. At the critical angle
$$\sin i_c = \frac{V_1}{V_2}$$the refracted ray travels along the interface at speed \( V_2 \), shedding a head wave back up into the upper layer at angle \( i_c \). This is the refracted wave Mohorovičić saw (now called Pn; the direct crustal wave is Pg).
Travel times in a two-layer Earth
For a layer of thickness \( h \) and velocity \( V_1 \) over a half-space of velocity \( V_2 \), with source and receiver on the surface at separation \( x \):
| Wave | Travel time | On a \( t \)–\( x \) plot |
|---|---|---|
| Direct | \( t = \dfrac{x}{V_1} \) | straight line through the origin, slope \( 1/V_1 \) |
| Reflected | \( t = \dfrac{\sqrt{x^2 + 4h^2}}{V_1} \) | hyperbola, \( t_0 = 2h/V_1 \) at \( x = 0 \) |
| Head wave (refracted) | \( t = \dfrac{x}{V_2} + \dfrac{2h\cos i_c}{V_1} \) | straight line, slope \( 1/V_2 \), intercept \( t_i \) |
From the head-wave line:
$$\boxed{h = \frac{t_i V_1}{2\cos i_c} = \frac{t_i}{2}\,\frac{V_1V_2}{\sqrt{V_2^2 - V_1^2}}}$$Two distances matter:
- Critical distance \( x_{crit} = 2h\tan i_c \): the nearest point at which the head wave exists.
- Crossover distance \( x_{co} = 2h\sqrt{\dfrac{V_2 + V_1}{V_2 - V_1}} \): beyond it the head wave arrives first, even though its path is longer.
Whole-Earth travel times and phase names
For distant earthquakes, distance is measured as the epicentral angle \( \Delta \) at Earth’s centre (1° \( \approx \) 111.2 km). Plotting arrival time against \( \Delta \) for thousands of earthquakes gives the travel-time curves; inverting them gives velocity as a function of depth (the Herglotz–Wiechert method, valid where velocity increases with depth). Jeffreys and Bullen published standard tables in 1940; models such as PREM (1981), iasp91 and ak135 followed.
Phases are named by the legs of their path:
| Symbol | Leg |
|---|---|
| P, S | P or S leg in the mantle (or crust) |
| K | P leg in the outer core |
| I, J | P and S legs in the inner core |
| c | reflection at the core–mantle boundary |
| i | reflection at the inner-core boundary |
| p, s | upgoing leg from the source before a surface reflection (depth phases) |
| g, n | crustal (Pg, Sg) and uppermost-mantle head wave (Pn, Sn) |
Examples: PcP (P reflected from the core), ScS, PKP (P through the outer core), PKIKP (P through the inner core), SKS (S converted to P in the outer core and back to S), PP (P reflected once at the surface), pP (depth phase; the time between P and pP gives focal depth). PKJKP, with an S leg in the inner core, would prove the inner core has rigidity; its identification has been claimed but is hard.
The Shadow Zones
At the core–mantle boundary P velocity drops from about 13.7 to about 8.1 km s\(^{-1}\). Rays entering the core bend towards the normal and emerge much farther away. The result is a P-wave shadow zone between roughly 103° and 142° from the epicentre, where no direct P arrives. Weak arrivals inside it, found by Inge Lehmann in 1936, are rays refracted by a faster inner core; she proposed the inner core to explain them.
S waves do not cross the liquid outer core at all. Beyond about 103° there is no direct S, so the S-wave shadow covers everything from about 103° to 180°. (S energy can still appear there as SKS, travelling as P in the core.)
graph LR
A[Earthquake] --> B[0 to about 103 degrees: direct P and S]
A --> C[about 103 to 142 degrees: P shadow, no direct S]
A --> D[beyond about 142 degrees: PKP, no direct S]
C --> E[Weak PKIKP arrivals: Lehmann 1936, inner core]Earth’s Layered Structure
Discontinuities
| Boundary | Depth | What changes | Identified by |
|---|---|---|---|
| Conrad (where present) | about 15–20 km in some continents | upper to lower crust; not global | V. Conrad (1925) |
| Mohorovičić (Moho) | about 5–10 km below the seafloor; about 35–40 km average under continents, up to about 70 km under Tibet and the Himalaya | crust → mantle; \( V_P \) jumps to about 8 km s\(^{-1}\) | A. Mohorovičić (1909) |
| Lithosphere–asthenosphere boundary | about 50–100 km under oceans (thickens with age), about 150–250 km under cratons | rigid plate → weak, partly molten mantle | — |
| 410 km | about 410 km | olivine → wadsleyite (velocity and density jump) | — |
| 660 km | about 660 km | ringwoodite → bridgmanite + ferropericlase; base of the transition zone | — |
| Core–mantle boundary (Gutenberg) | about 2,890 km | silicate solid → liquid iron alloy; \( V_P \) drops, \( V_S \to 0 \), density about 5.6 → 9.9 g cm\(^{-3}\) | R. D. Oldham (core, 1906); B. Gutenberg (depth, 1914) |
| Inner-core boundary (Lehmann) | about 5,150 km | liquid → solid; \( V_P \) rises, \( V_S \) reappears | I. Lehmann (1936) |
The name “Lehmann discontinuity” is also used for a velocity increase near 220 km in some continental upper-mantle models. In an exam, read “Lehmann discontinuity” with the context; for the inner core the safe phrase is “inner-core boundary”.
Layers and their properties
| Layer | Depth (km) | \( V_P \) (km s\(^{-1}\)) | \( V_S \) (km s\(^{-1}\)) | Density (g cm\(^{-3}\)) | State |
|---|---|---|---|---|---|
| Crust | 0 to Moho | about 5.8–7.2 | about 3.3–4.0 | about 2.7–2.9 | solid |
| Upper mantle | Moho to 410 | about 8.0–8.9 | about 4.5–4.8 | about 3.3–3.5 | solid |
| Transition zone | 410–660 | about 9.1–10.3 | about 4.9–5.6 | about 3.7–4.0 | solid |
| Lower mantle | 660–2,890 | about 10.7–13.7 | about 5.9–7.3 | about 4.4–5.6 | solid |
| Outer core | 2,890–5,150 | about 8.1–10.4 | 0 | about 9.9–12.2 | liquid |
| Inner core | 5,150–6,371 | about 11.0–11.3 | about 3.5–3.7 | about 12.8–13.1 | solid |
(Values rounded from PREM.) The mantle makes up about 84% of Earth’s volume and about two-thirds of its mass; the core about 16% of the volume and about 32% of the mass.
graph TD
A["Crust: 0 to Moho, 5 to 70 km"] --> B["Upper mantle with LVZ: to 410 km"]
B --> C["Transition zone: 410 to 660 km"]
C --> D["Lower mantle: 660 to 2,890 km, D-double-prime at base"]
D --> E["Outer core, liquid: 2,890 to 5,150 km"]
E --> F["Inner core, solid: 5,150 to 6,371 km"]Two ways to divide the outer Earth
| Compositional (seismic velocity jump) | Mechanical (strength) |
|---|---|
| Crust: felsic to mafic rock above the Moho | Lithosphere: crust plus the rigid uppermost mantle; moves as a plate |
| Mantle: peridotite below the Moho | Asthenosphere: weak mantle below the lithosphere; flows over geological time |
The Moho is a compositional boundary; the lithosphere–asthenosphere boundary is a thermal and mechanical one, roughly an isotherm near 1,300 °C. Plates are lithosphere, not crust.
The low-velocity zone
Below the lithosphere, at roughly 80–220 km under oceans, seismic velocities (especially \( V_S \)) are lower than above and below, and attenuation is high. Gutenberg proposed this low-velocity zone (LVZ). It is attributed to temperatures close to the solidus, with a small melt fraction or other weakening. It coincides broadly with the asthenosphere. It is weak or absent beneath old cratons.
The transition zone and slabs
The 410 and 660 km discontinuities are phase changes, not changes of composition (in the simplest models), and they respond to temperature in opposite ways:
| Discontinuity | Reaction | Clapeyron slope | In a cold slab | In a hot plume |
|---|---|---|---|---|
| 410 km | olivine → wadsleyite | positive (exothermic) | shallower | deeper |
| 660 km | ringwoodite → bridgmanite + ferropericlase | negative (endothermic) | deeper | shallower |
So a cold slab thickens the transition zone and a hot plume thins it. The negative slope at 660 km resists slab penetration, which is why some slabs flatten there before sinking into the lower mantle.
The lowermost mantle and the core
- D″ layer (D-double-prime; a label from Bullen’s lettering of Earth’s layers): the bottom roughly 200–300 km of the mantle, with velocity jumps, anisotropy and strong lateral variation. It is a thermal boundary layer and possibly a graveyard for slabs. The post-perovskite phase transition is thought to occur here.
- Ultra-low-velocity zones (ULVZs): patches a few to tens of km thick at the core–mantle boundary with velocity reductions of about 10% or more, possibly partial melt.
- Large low-shear-velocity provinces (LLSVPs): two broad regions beneath Africa and the central Pacific, seen by tomography, of uncertain thermal or chemical origin.
- Inner core: P waves travel faster along paths parallel to the rotation axis than across it (anisotropy), by a few percent.
How the Interior Is Worked Out
| Tool | What it gives |
|---|---|
| Travel-time inversion (Herglotz–Wiechert) | \( V(r) \) where velocity increases with depth |
| Reflected and converted phases (PcP, ScS, receiver functions) | depths of discontinuities |
| Seismic tomography | 3-D velocity anomalies: slow (usually hot) and fast (usually cold) regions, e.g. subducted slabs |
| Free oscillations (normal modes) | density and rigidity with depth; rigidity of the inner core |
| Surface-wave dispersion | crust and upper-mantle shear-velocity structure |
| Mass and moment of inertia (gravity, orbits) | constraints that any density model must fit |
| Adams–Williamson equation | density increase with depth in a homogeneous, adiabatic layer |
The Adams–Williamson equation uses the seismic parameter \( \Phi = V_P^2 - \frac{4}{3}V_S^2 = K/\rho \):
$$\frac{d\rho}{dr} = -\frac{\rho(r)\,g(r)}{\Phi(r)}$$Applied layer by layer and adjusted to match Earth’s mass (\( 5.97\times 10^{24} \) kg) and moment of inertia factor (0.3307), it gives density profiles like PREM. A homogeneous layer that fails it is not adiabatic or not uniform in composition.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Moho: crust–mantle, compositional | LAB: lithosphere–asthenosphere, thermal and mechanical | |
| Critical distance: where the head wave first appears | Crossover distance: where the head wave starts to arrive first | |
| P shadow (about 103°–142°): caused by velocity drop in the core | S shadow (about 103°–180°): caused by the liquid outer core | |
| Rayleigh: retrograde elliptical, vertical plane, exists on any free surface | Love: horizontal SH, needs a low-velocity surface layer | |
| Gutenberg discontinuity: core–mantle boundary | Lehmann: inner-core boundary (or a ~220 km upper-mantle jump in some models) | |
| 410 km: positive Clapeyron slope, shallower in slabs | 660 km: negative Clapeyron slope, deeper in slabs | |
| Epicentral distance \( \Delta \) in degrees | Hypocentral distance in km (includes depth) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Which body wave cannot travel through the outer core, and why?
- At about what depth is the core–mantle boundary?
- Which feature of Earth did Inge Lehmann propose in 1936?
Answers
- The S wave. The outer core is liquid, so its shear modulus is zero and \( V_S = \sqrt{\mu/\rho} = 0 \).
- About 2,890 km.
- The solid inner core, from weak P arrivals inside the P-wave shadow zone.
Level 2: Part B Style
Practice Q1. A rock has bulk modulus 50 GPa, shear modulus 30 GPa and density 2,700 kg m\(^{-3}\). Its P-wave velocity is closest to:
(a) 3.3 km s\(^{-1}\) (b) 4.3 km s\(^{-1}\) (c) 5.8 km s\(^{-1}\) (d) 6.4 km s\(^{-1}\)
Answer: (c) 5.8 km/s
\( V_P = \sqrt{\dfrac{K + \frac{4}{3}\mu}{\rho}} = \sqrt{\dfrac{50 + 40}{2700}\times 10^{9}} = \sqrt{3.33\times 10^{7}} \approx 5{,}774 \) m s\(^{-1}\) \( \approx 5.8 \) km s\(^{-1}\).
(a) is \( V_S = \sqrt{30\times 10^9/2700} \approx 3.3 \) km s\(^{-1}\). (b) uses \( \sqrt{K/\rho} \) (the fluid formula, about 4.3). (d) uses \( \sqrt{(K + 2\mu)/\rho} \), confusing \( K \) with Lamé’s \( \lambda \) (about 6.4).
Practice Q2. For a rock with \( V_P/V_S = \sqrt{3} \), Poisson’s ratio is:
(a) 0.20 (b) 0.25 (c) 0.33 (d) 0.50
Answer: (b) 0.25
\( \nu = \dfrac{V_P^2 - 2V_S^2}{2(V_P^2 - V_S^2)} = \dfrac{3 - 2}{2(3 - 1)} = \dfrac{1}{4} \). This is the Poisson solid, \( \lambda = \mu \). (d) is the value for a fluid (\( V_S = 0 \)).
Practice Q3. A crust 35 km thick (\( V_P = 6.0 \) km s\(^{-1}\)) overlies mantle with \( V_P = 8.0 \) km s\(^{-1}\). The distance beyond which the Moho head wave (Pn) is the first arrival is about:
(a) 79 km (b) 140 km (c) 185 km (d) 245 km
Answer: (c) 185 km
\( x_{co} = 2h\sqrt{\dfrac{V_2 + V_1}{V_2 - V_1}} = 70\sqrt{\dfrac{14}{2}} = 70\times 2.646 \approx 185 \) km.
(a) is the critical distance \( 2h\tan i_c \approx 79 \) km, where Pn first appears but still arrives after Pg.
Practice Q4. The P-wave shadow zone between about 103° and 142° is caused mainly by:
(a) absorption of P waves by the partially molten asthenosphere (b) the sharp decrease in P velocity at the core–mantle boundary (c) the zero rigidity of the outer core stopping P waves (d) the increase in P velocity at the inner-core boundary
Answer: (b)
P velocity falls from about 13.7 to about 8.1 km s\(^{-1}\) entering the outer core, so rays bend towards the normal and emerge beyond about 142°. (c) is wrong: P waves do travel through liquids; it is S waves that are stopped. (d) explains the weak arrivals inside the shadow, not the shadow itself.
Level 3: Part C Style
Practice Q5. A refraction line is shot over a single layer on a faster half-space. First arrivals:
| Distance (km) | 50 | 100 | 200 | 300 |
|---|---|---|---|---|
| Time (s) | 10.0 | 20.0 | 34.4 | 46.9 |
The first two points lie on the direct-wave line and the last two on the head-wave line. The thickness of the layer is closest to:
(a) 15 km (b) 24 km (c) 30 km (d) 47 km
Answer: (c) 30 km
Direct wave: \( V_1 = 50/10 = 5.0 \) km s\(^{-1}\).
Head wave: slope from the last two points, \( V_2 = \dfrac{300 - 200}{46.9 - 34.4} = \dfrac{100}{12.5} = 8.0 \) km s\(^{-1}\). Intercept: \( t_i = 34.4 - 200/8 = 9.4 \) s.
Critical angle: \( \sin i_c = 5/8 \), \( i_c \approx 38.7° \), \( \cos i_c \approx 0.781 \).
\( h = \dfrac{t_i V_1}{2\cos i_c} = \dfrac{9.4\times 5.0}{2\times 0.781} \approx 30.1 \) km.
(b) forgets the \( \cos i_c \) (gives \( 9.4\times 5/2 = 23.5 \)); (d) uses \( V_1 t_i \) without halving.
Practice Q6. A P ray leaves the surface (radius 6,371 km, \( V_P = 5.8 \) km s\(^{-1}\)) at an angle of incidence of 30°. Use this simplified velocity model:
| Depth (km) | 400 | 660 | 1,000 |
|---|---|---|---|
| \( V_P \) (km s\(^{-1}\)) | 8.90 | 10.27 | 11.06 |
In which depth range does the ray turn?
(a) above 400 km (b) 400–660 km (c) 660–1,000 km (d) below 1,000 km
Answer: (c) 660–1,000 km
Ray parameter: \( p = \dfrac{r\sin i}{V} = \dfrac{6371\times 0.5}{5.8} \approx 549.2 \) s rad\(^{-1}\).
The ray turns where \( r/V(r) = p \). Compute \( r/V \):
- 400 km: \( 5971/8.90 \approx 670.9 \)
- 660 km: \( 5711/10.27 \approx 556.1 \)
- 1,000 km: \( 5371/11.06 \approx 485.6 \)
\( r/V \) passes 549.2 between 660 and 1,000 km (linear interpolation gives about 690 km), so the ray bottoms in the uppermost lower mantle. A steeper ray (smaller \( i \), smaller \( p \)) would turn deeper.
Practice Q7. Consider these statements:
- A cold subducting slab depresses the 660 km discontinuity.
- The Moho and the lithosphere–asthenosphere boundary are the same surface beneath oceans.
- The absence of direct S waves beyond about 103° shows that the outer core is liquid.
- Love waves need a low-velocity layer above a faster medium.
Which are correct?
(a) 1 and 3 only (b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 3 and 4 only
- 1 true: the ringwoodite breakdown has a negative Clapeyron slope; at lower temperature it occurs at higher pressure, so deeper.
- 2 false: the oceanic Moho is about 7 km below the seafloor; the oceanic LAB is tens of km deeper and deepens with age.
- 3 true: zero rigidity means no S propagation.
- 4 true: SH waves are trapped in a slower surface layer by total internal reflection; on a uniform half-space Love waves do not exist.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Velocities | \( V_P = \sqrt{(K + \frac{4}{3}\mu)/\rho} \), \( V_S = \sqrt{\mu/\rho} \) |
| Poisson solid | \( \lambda = \mu \), \( \nu = 0.25 \), \( V_P/V_S = \sqrt{3} \) |
| Poisson’s ratio | \( \nu = (V_P^2 - 2V_S^2)/[2(V_P^2 - V_S^2)] \) |
| Surface waves | Rayleigh retrograde ellipse, about \( 0.92V_S \); Love SH, needs a slow layer; both dispersive |
| Ray parameter | flat \( p = \sin i/V \); spherical \( p = r\sin i/V \); turning point \( p = r/V \) |
| Critical angle | \( \sin i_c = V_1/V_2 \) |
| Head wave | \( t = x/V_2 + 2h\cos i_c/V_1 \) |
| Crossover distance | \( 2h\sqrt{(V_2 + V_1)/(V_2 - V_1)} \) |
| Shadow zones | P about 103°–142°; no direct S beyond about 103° |
| Moho | about 7 km (ocean), 35–40 km (continent), up to about 70 km (Tibet) |
| Transition zone | 410 (positive slope) to 660 km (negative slope) |
| CMB, ICB | about 2,890 km and 5,150 km; centre 6,371 km |
| Discoverers | Oldham 1906, Mohorovičić 1909, Gutenberg 1914, Lehmann 1936 |
| Normal mode | \( _0S_2 \) period about 54 min |
| Adams–Williamson | \( d\rho/dr = -\rho g/\Phi \), \( \Phi = V_P^2 - \frac{4}{3}V_S^2 \) |
Key Takeaways
What’s Next
- Stress, Strain, Folds, Joints and Faults: from elastic waves to permanent deformation of rocks.
- Earthquakes: Causes, Measurement and Seismicity: where seismic waves come from and how earthquakes are sized and located.
- Interior of the Earth, Deformation and Tectonics: back to the chapter overview.