Stress, Strain, Folds, Joints and Faults
CSIR NET Earth Sciences: stress tensor, Mohr circle, Coulomb failure, Anderson faulting, strain ellipse, rheology, fold classes, joints and fault geometry.
- 23 min
On this page · 14 sections
Prerequisites
- Eigenvalues and eigenvectors of a symmetric matrix: principal stresses are exactly that. Revise in Linear Algebra, Matrices and Eigenvalues.
- Elastic moduli and Hooke’s law from Seismology Basics and Earth’s Internal Structure.
- Bedding, superposition and unconformities from Stratigraphy, Origin of Life and the Fossil Record. Folds and faults are read against them.
The Hook: Why Faults Dip at 60° or 30°
Stress
Traction and the stress tensor
Stress is force per unit area. The force per unit area acting on a particular plane is a traction vector; it can be split into a normal stress \( \sigma_n \) (perpendicular to the plane) and a shear stress \( \tau \) (parallel to it). The state of stress at a point is the second-rank tensor
$$\boldsymbol{\sigma} = \begin{pmatrix} \sigma_{xx} & \sigma_{xy} & \sigma_{xz} \\ \sigma_{yx} & \sigma_{yy} & \sigma_{yz} \\ \sigma_{zx} & \sigma_{zy} & \sigma_{zz} \end{pmatrix}, \qquad \sigma_{ij} = \sigma_{ji}$$It is symmetric (no net torque), so it has six independent components. Units: pascal; geologists use MPa (1 MPa = 10 bar).
Principal stresses. Because the tensor is real and symmetric, there are always three mutually perpendicular directions on whose planes the shear stress is zero. The normal stresses on them are the principal stresses (the eigenvalues), labelled
$$\sigma_1 \geq \sigma_2 \geq \sigma_3$$Geology uses compression positive, the opposite of most engineering texts. So \( \sigma_1 \) is the greatest compressive stress.
| Term | Meaning |
|---|---|
| Mean stress \( \sigma_m \) | \( (\sigma_1 + \sigma_2 + \sigma_3)/3 \); the isotropic (pressure-like) part, changes volume |
| Deviatoric stress | stress minus the mean stress; changes shape, drives deformation |
| Differential stress | \( \sigma_1 - \sigma_3 \); controls failure |
| Lithostatic stress | \( \rho g z \), equal in all directions; about 27 MPa per km for \( \rho = 2{,}700 \) kg m\(^{-3}\) |
| Hydrostatic (pore) pressure | \( \rho_w g z \), about 10 MPa per km |
Stress on a plane: the Mohr circle
In two dimensions, take a plane whose normal makes angle \( \theta \) with \( \sigma_1 \):
$$\boxed{\sigma_n = \frac{\sigma_1 + \sigma_3}{2} + \frac{\sigma_1 - \sigma_3}{2}\cos 2\theta} \qquad \boxed{\tau = \frac{\sigma_1 - \sigma_3}{2}\sin 2\theta}$$Plotting \( (\sigma_n, \tau) \) for all \( \theta \) traces the Mohr circle: centre \( (\sigma_1 + \sigma_3)/2 \), radius \( (\sigma_1 - \sigma_3)/2 \). A plane at angle \( \theta \) plots at angle \( 2\theta \) around the circle.
- Maximum shear stress \( (\sigma_1 - \sigma_3)/2 \) acts on planes at 45° to \( \sigma_1 \).
- The principal planes (\( \theta = 0° \) and 90°) have zero shear stress.
Failure criteria
| Criterion | Statement | Use |
|---|---|---|
| Tensile (Griffith-type) | fracture when \( \sigma_3 = -T_0 \) (tensile strength, a few MPa to about 10–20 MPa) | extension fractures, joints |
| Coulomb (Mohr–Coulomb) | \( \tau = C + \mu\,\sigma_n \) (\( C \) cohesion, \( \mu = \tan\phi \) internal friction) | shear fractures in intact rock |
| Byerlee’s law | friction on existing faults: \( \tau \approx 0.85\,\sigma_n \) at low normal stress; \( \tau \approx 50\ \text{MPa} + 0.6\,\sigma_n \) at higher stress | reactivation of faults; nearly independent of rock type |
| Von Mises / Tresca | yield at a critical deviatoric stress | ductile (plastic) flow |
On the Mohr diagram, failure happens when the circle touches the failure envelope. For a Coulomb envelope with friction angle \( \phi \), the fracture plane makes an angle
$$\boxed{\theta_f = 45° - \frac{\phi}{2}}$$with \( \sigma_1 \). For \( \mu = 0.6 \) (\( \phi \approx 31° \)) this is about 30°. Two such planes, symmetric about \( \sigma_1 \), form a conjugate pair with an acute angle of about 60° bisected by \( \sigma_1 \).
Pore pressure and effective stress
Fluid in pores pushes outward and supports part of the load. The rock responds to the effective stress
$$\boxed{\sigma'_n = \sigma_n - P_f}$$Raising \( P_f \) shifts the Mohr circle to the left without changing its size until it touches the envelope. This is how fluid injection, reservoir filling and overpressured sediments trigger failure (and why low-angle thrust sheets could move, as Hubbert and Rubey argued in 1959).
Anderson’s theory of faulting
The Earth’s surface is a free surface with no shear traction, so near the surface one principal stress is vertical. Which one decides the fault type:
| Vertical stress | Fault type | Regime | Typical dip |
|---|---|---|---|
| \( \sigma_1 \) | Normal | extension | about 60° |
| \( \sigma_3 \) | Thrust (reverse) | compression | about 30° |
| \( \sigma_2 \) | Strike-slip | wrench | vertical |
In each case the fault contains \( \sigma_2 \) and makes about 30° with \( \sigma_1 \). Real faults depart from these angles where they reactivate older weaknesses, rotate during deformation or where pore pressure is high.
graph TD
A[Free surface: one principal stress vertical] --> B[sigma1 vertical]
A --> C[sigma2 vertical]
A --> D[sigma3 vertical]
B --> E[Normal fault, dip about 60 degrees]
C --> F[Strike-slip fault, vertical]
D --> G[Thrust fault, dip about 30 degrees]Strain
Measures of strain
Strain is the change in shape or size relative to the original. Deformation in general also includes rigid translation and rotation.
| Measure | Definition |
|---|---|
| Extension (elongation) \( e \) | \( (l - l_0)/l_0 \); negative for shortening |
| Stretch \( S \) | \( l/l_0 = 1 + e \) |
| Quadratic elongation \( \lambda \) | \( S^2 \) |
| Shear strain \( \gamma \) | \( \tan\psi \), where \( \psi \) is the angular shear (change in angle between two originally perpendicular lines) |
| Volumetric strain \( \Delta \) | \( (V - V_0)/V_0 \) |
The strain ellipse and ellipsoid
In homogeneous strain, straight lines stay straight, parallel lines stay parallel, and a circle becomes an ellipse (in 3-D a sphere becomes an ellipsoid). The ellipsoid axes are \( X \geq Y \geq Z \) (principal stretches \( S_1 \geq S_2 \geq S_3 \)). The strain ratio \( R_s = X/Z \) (or \( X/Y \) in 2-D) measures intensity.
The Flinn diagram plots \( a = X/Y \) against \( b = Y/Z \) and uses
$$k = \frac{a - 1}{b - 1}$$| \( k \) | Shape | Name | Fabric |
|---|---|---|---|
| \( k = \infty \) to \( k > 1 \) | cigar | prolate, constrictional | lineation (L-tectonite) |
| \( k = 1 \) | plane strain (if no volume change) | L–S | |
| \( 0 < k < 1 \) to \( k = 0 \) | pancake | oblate, flattening | foliation (S-tectonite) |
Coaxial and non-coaxial strain
| Pure shear | Simple shear | |
|---|---|---|
| Strain path | coaxial: the principal strain axes keep the same material lines throughout | non-coaxial: material lines rotate through the strain axes |
| Rotation | none (irrotational) | rotational (vorticity) |
| Example | flattening of a layer | ductile shear zone; like sliding a deck of cards |
| Fabric | symmetric | asymmetric (S–C fabrics, σ- and δ-type porphyroclasts, rotated grains) used as shear-sense indicators |
Natural deformation is usually general shear, a mix of the two.
Rheology: how rocks respond
| Behaviour | Law | Character |
|---|---|---|
| Elastic | \( \sigma = E\varepsilon \) | instantaneous, recoverable |
| Viscous (Newtonian) | \( \sigma = \eta\,\dot{\varepsilon} \) | time-dependent, permanent; \( \eta \) is viscosity (Pa s) |
| Plastic | no flow below a yield stress | permanent once yield is reached |
| Visco-elastic (Maxwell) | elastic at short times, viscous at long times | Maxwell time \( \eta/\mu \) separates the regimes |
| Power-law creep | \( \dot{\varepsilon} \propto \sigma^n e^{-Q/RT} \), \( n \approx 3 \) for dislocation creep | non-Newtonian; how the mantle and lower crust flow |
The mantle behaves elastically for seismic waves (seconds) yet flows over thousands of years (post-glacial rebound gives a viscosity of about \( 10^{21} \) Pa s; see Gravity, Geomagnetism, Heat Flow and Isostasy).
Brittle and ductile
| Factor | Favours brittle (fracture, faulting) | Favours ductile (flow, folding) |
|---|---|---|
| Temperature | low | high |
| Confining pressure | low | high |
| Strain rate | high | low |
| Fluid | high pore pressure (lowers effective stress) | hydrolytic weakening of minerals |
| Mineralogy | feldspar- and olivine-rich rocks stay brittle to higher \( T \) | quartz-rich rocks flow from about 300 °C |
The brittle–ductile transition in quartz-rich continental crust lies roughly at 10–15 km (about 300 °C), which is why most continental earthquakes are shallower than about 15–20 km. Feldspar and olivine stay brittle to higher temperature.
Folds
Fold geometry
A fold is a curved surface (bedding, foliation) formed by ductile or distributed deformation.
| Term | Meaning |
|---|---|
| Hinge (line) | line of maximum curvature |
| Limbs | the flatter parts on either side of the hinge |
| Axial surface (plane) | surface through the hinges of successive layers |
| Fold axis | the line that, moved parallel to itself, generates a cylindrical fold |
| Plunge | angle of the hinge line below the horizontal |
| Interlimb angle | angle between the limbs |
| Crest and trough | highest and lowest points of a fold surface (not necessarily the hinge) |
| Wavelength, amplitude | distance between successive hinges of the same kind; half the height difference |
| Vergence | direction towards which an asymmetric fold leans (the direction of the upper layer’s relative motion) |
Anticline vs antiform. An antiform closes upward and a synform closes downward: geometric terms. An anticline has the oldest rocks in its core and a syncline the youngest: stratigraphic terms. The two pairs coincide only when the sequence is the right way up. An antiform with younger rocks in its core (because the sequence was already overturned) is an antiformal syncline; a synform with older rocks in its core is a synformal anticline.
Fold classifications
By interlimb angle (Fleuty, 1964):
| Class | Interlimb angle |
|---|---|
| Gentle | 180°–120° |
| Open | 120°–70° |
| Close | 70°–30° |
| Tight | 30°–0° |
| Isoclinal | about 0° (parallel limbs) |
| Elastica (mushroom) | negative |
By attitude of axial surface and hinge:
| Fold | Axial surface | Note |
|---|---|---|
| Upright | near vertical | limbs dip in opposite directions |
| Inclined | moderate dip | |
| Overturned | inclined | one limb rotated past vertical; both limbs dip the same way |
| Recumbent | near horizontal | |
| Reclined | dipping, hinge plunging down the dip of the axial surface | |
| Plunging | any | hinge inclined; outcrop pattern makes V or U shapes (“noses”) |
By layer thickness (Ramsay’s dip-isogon classes). A dip isogon joins points of equal dip on the outer and inner arcs of a folded layer.
| Class | Isogons | Layer shape |
|---|---|---|
| 1A | strongly convergent | layer thinner at the hinge than on the limbs (orthogonal thickness increases towards the limbs) |
| 1B | convergent, perpendicular to layers | parallel (concentric) fold: constant orthogonal thickness |
| 1C | weakly convergent | between parallel and similar |
| 2 | parallel to each other | similar fold: constant thickness parallel to the axial surface; thickened hinges |
| 3 | divergent | outer arc more tightly curved than the inner; hinges thickened relative to limbs even more than in class 2 |
Competent layers tend to class 1B–1C; incompetent layers to class 3.
Other terms: cylindrical vs non-cylindrical; symmetric vs asymmetric (S and Z parasitic folds on the limbs of larger folds point to the main hinge); chevron (straight limbs, sharp hinges); kink bands; monocline (single step in otherwise flat beds); dome and basin (no single trend); sheath folds (highly curved hinges in intense simple shear); ptygmatic folds (irregular folds of a competent vein in incompetent host).
How folds form
| Mechanism | Driving geometry | Result |
|---|---|---|
| Buckling | shortening parallel to a competent layer in a weaker matrix | wavelength set by thickness and viscosity contrast |
| Bending | forces at a high angle to layering (e.g. over a rising salt dome or fault block) | forced folds, drape folds |
| Passive folding | layering has no mechanical role; flow simply deforms it | similar folds in high-grade rocks |
| Flexural slip / flexural flow | slip or flow between or within layers during buckling | slickensides on bedding, parallel folds |
| Fault-related folding | fault-bend, fault-propagation and detachment folds above thrusts | common in fold-and-thrust belts |
For a single competent layer of thickness \( t \) and viscosity \( \eta_L \) in a matrix of viscosity \( \eta_M \), the Biot–Ramberg dominant wavelength is
$$L_d = 2\pi t\left(\frac{\eta_L}{6\,\eta_M}\right)^{1/3}$$Thicker and more competent layers make longer-wavelength buckles.
Joints
A joint is a fracture with no visible displacement parallel to its surface. Most joints are extension (mode I) fractures that open perpendicular to \( \sigma_3 \) and grow in the \( \sigma_1 \)–\( \sigma_2 \) plane.
| Type | Origin |
|---|---|
| Systematic joints | parallel, regularly spaced sets; regional stress |
| Non-systematic joints | curved, irregular, end against other joints |
| Columnar joints | thermal contraction in cooling lava or sills; polygonal (often roughly hexagonal) columns perpendicular to cooling surfaces; well shown in the Deccan basalts |
| Sheeting (exfoliation) joints | unloading of plutons by erosion; parallel to the topographic surface |
| Shear joints (conjugate) | intersecting sets in the Coulomb orientation (debated in many cases) |
| Tectonic joints | related to folding: cross joints perpendicular to the fold axis, longitudinal joints parallel to it |
| Unloading and cooling joints | release of stored elastic strain and thermal contraction |
Joint-surface markings record how the fracture grew: plumose structure (feather-like ridges radiating from the origin), hackle and rib marks (arrest lines concentric about the origin). A joint set is a family of parallel joints; two or more sets form a joint system. Where fractures are filled with mineral precipitate they are veins; en échelon tension gashes record shear sense.
Faults
Geometry and terms
A fault is a fracture or zone along which there has been appreciable displacement parallel to the surface.
| Term | Meaning |
|---|---|
| Hanging wall / footwall | block above / below an inclined fault |
| Strike, dip | orientation of the fault plane |
| Net slip | actual displacement vector of formerly adjacent points |
| Dip slip / strike slip | components of net slip down the dip and along the strike |
| Rake (pitch) | angle of the slip vector measured in the fault plane from the strike |
| Separation | apparent offset of a marker on a map or section; not the same as slip |
| Throw / heave | vertical / horizontal components of dip separation in a vertical section perpendicular to strike |
For pure dip slip \( d \) on a fault of dip \( \delta \):
$$\boxed{\text{throw} = d\sin\delta} \qquad \boxed{\text{heave} = d\cos\delta}$$Classification by slip
| Fault | Hanging wall moves | Effect | Setting |
|---|---|---|---|
| Normal | down | horizontal extension | rifts, passive margins, ridges |
| Reverse | up, dip > 45° | shortening | |
| Thrust | up, dip < 45° (often < 30°) | shortening, older over younger | collision belts, accretionary wedges |
| Strike-slip (wrench) | sideways | no vertical motion ideally | transforms, continental strike-slip zones |
| Oblique-slip | combination |
Strike-slip faults are dextral (right-lateral: standing on one side, the other side moves to your right) or sinistral (left-lateral). Sense does not depend on which side you stand.
Fault assemblages
- Extensional: horst (uplifted block between two normal faults) and graben (down-dropped block); half-graben with one master fault; listric faults (concave-up, flattening with depth) with rollover anticlines; growth faults in deltas (thicker strata on the hanging wall); metamorphic core complexes below low-angle detachments.
- Contractional: imbricate fans, duplexes (horses between a floor and roof thrust), nappes (large far-travelled sheets), klippe (isolated erosional remnant of a thrust sheet) and window or fenster (hole eroded through a thrust sheet showing the footwall beneath). Thrusts tend to step up through the section, placing older rocks over younger. The Himalaya is bounded by the Main Central Thrust, Main Boundary Thrust and Main Frontal Thrust, which young southwards.
- Strike-slip: restraining bends (transpression, pop-ups, positive flower structures) and releasing bends (transtension, pull-apart basins, negative flower structures); Riedel shears.
Recognising faults
| Evidence | What to look for |
|---|---|
| Offset of markers | beds, dykes, veins displaced |
| Repetition or omission of beds | in a vertical borehole through a dipping sequence, a normal fault usually omits beds and a reverse/thrust fault repeats them |
| Fault-surface features | slickensides (polished surfaces) and slickenlines (striations parallel to slip); steps indicate sense |
| Drag folds | beds bent near the fault |
| Fault rocks | breccia, gouge, cataclasite, mylonite, pseudotachylyte |
| Geomorphology | fault scarps, triangular facets, offset streams, springs, sag ponds |
Fault rocks
| Rock | Formation | Cohesion | Depth regime |
|---|---|---|---|
| Fault breccia | brittle fragmentation; angular clasts > about 30% | incohesive | shallow |
| Fault gouge | intense crushing to clay-sized powder | incohesive | shallow |
| Cataclasite | cataclastic flow (fracturing and grain rotation) | cohesive | brittle, deeper |
| Pseudotachylyte | frictional melting during fast seismic slip; glassy veins | cohesive | seismic slip |
| Mylonite | ductile, crystal-plastic deformation; grain-size reduction, strong foliation and lineation | cohesive | ductile shear zones, below the brittle–ductile transition |
Pseudotachylyte is the one fault rock taken as direct evidence of an ancient earthquake.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Stress: force per area (cause) | Strain: change in shape or size (effect) | |
| Pure shear: coaxial, no rotation | Simple shear: non-coaxial, rotational | |
| Anticline / syncline: by age of core | Antiform / synform: by shape | |
| Parallel fold (1B): constant orthogonal thickness | Similar fold (2): constant thickness along the axial surface | |
| Joint: no shear displacement | Fault: appreciable displacement | |
| Slip: true displacement | Separation: apparent offset of a marker | |
| Throw: vertical component | Heave: horizontal component | |
| Klippe: isolated outlier of the hanging-wall sheet | Window: footwall exposed through a hole in the sheet | |
| Cataclasite: brittle, cohesive | Mylonite: ductile, cohesive, foliated |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Under Anderson’s theory, which principal stress is vertical for a thrust fault?
- Which rock in a fault zone is taken as direct evidence of seismic slip?
- What is the interlimb angle range of a “close” fold in Fleuty’s scheme?
Answers
- \( \sigma_3 \) (least compressive stress vertical).
- Pseudotachylyte, a glassy rock from frictional melting.
- 70° to 30°.
Level 2: Part B Style
Practice Q1. With \( \sigma_1 = 100 \) MPa and \( \sigma_3 = 40 \) MPa, the shear stress on a plane whose normal makes 30° with \( \sigma_1 \) is closest to:
(a) 15 MPa (b) 26 MPa (c) 30 MPa (d) 52 MPa
Answer: (b) 26 MPa
\( \tau = \frac{\sigma_1 - \sigma_3}{2}\sin 2\theta = 30\sin 60° \approx 26.0 \) MPa.
(c) is the maximum shear stress (on planes at 45°). (d) forgets to halve the differential stress. (a) uses \( \sin 30° \) instead of \( \sin 60° \).
Practice Q2. In a region where the greatest principal stress is horizontal and the least is vertical, the faults expected under Anderson’s theory are:
(a) normal faults dipping about 60° (b) thrust faults dipping about 30° (c) vertical strike-slip faults (d) listric normal faults
Answer: (b)
\( \sigma_3 \) vertical is the thrust regime; the fault makes about 30° with the horizontal \( \sigma_1 \), so it dips about 30°. (a) needs \( \sigma_1 \) vertical; (c) needs \( \sigma_2 \) vertical.
Practice Q3. A normal fault dips 60° and has 200 m of pure dip slip. Its throw and heave are:
(a) 100 m and 173 m (b) 173 m and 100 m (c) 200 m and 115 m (d) 115 m and 200 m
Answer: (b) 173 m and 100 m
Throw \( = 200\sin 60° \approx 173 \) m; heave \( = 200\cos 60° = 100 \) m. (a) swaps sine and cosine.
Practice Q4. A fold has older rocks in its core but closes downward. It is best described as:
(a) a synformal anticline (b) an antiformal syncline (c) a recumbent syncline (d) a monocline
Answer: (a) a synformal anticline
“Closes downward” is a synform (shape). “Older rocks in the core” is an anticline (age). So it is a synformal anticline, which implies an overturned sequence, typically from refolding.
Level 3: Part C Style
Practice Q5. Intact rock has a Coulomb envelope \( \tau = 20\ \text{MPa} + 0.6\,\sigma_n \). At depth, \( \sigma_1 = 150 \) MPa and \( \sigma_3 = 50 \) MPa (total stresses). Initially there is no pore pressure. Which statements are correct?
- The rock is initially stable.
- Failure would occur on planes making about 29.5° with \( \sigma_1 \).
- A pore pressure of about 36 MPa would bring the rock to failure.
- Raising pore pressure increases the radius of the Mohr circle.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 3 and 4 only
Answer: (b) 1, 2 and 3 only
Friction angle: \( \phi = \tan^{-1}0.6 \approx 30.96° \), \( \sin\phi \approx 0.5145 \), \( C\cot\phi = 20/0.6 \approx 33.3 \) MPa.
A Mohr circle of centre \( c \) and radius \( r \) touches the Coulomb line when \( r = (C\cot\phi + c)\sin\phi \).
- Centre 100 MPa, radius 50 MPa. Critical radius \( = (33.3 + 100)\times 0.5145 \approx 68.6 \) MPa > 50, so the circle is below the envelope: stable. Statement 1 true.
- \( \theta_f = 45° - \phi/2 \approx 45 - 15.5 = 29.5° \). Statement 2 true.
- With pore pressure the centre moves to \( 100 - P_f \): \( (33.3 + 100 - P_f)\times 0.5145 = 50 \Rightarrow P_f \approx 133.3 - 97.2 \approx 36.2 \) MPa. Statement 3 true.
- Statement 4 false: pore pressure shifts the circle, it does not change its radius.
This is the mechanism of fluid-induced seismicity.
Practice Q6. A deformed sandstone contains originally spherical concretions. Measured ellipsoid axes are in the ratio \( X : Y : Z = 2.0 : 1.0 : 0.5 \). Which statements are correct?
- The Flinn parameter \( k = 1 \).
- The strain is plane strain if volume was conserved.
- The strain ratio \( X/Z = 4 \).
- The rock should show a strong lineation but no foliation.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
\( a = X/Y = 2 \), \( b = Y/Z = 2 \), so \( k = (2 - 1)/(2 - 1) = 1 \). Statement 1 true.
\( XYZ = 2.0\times 1.0\times 0.5 = 1 \), so volume is unchanged and \( Y = 1 \): plane strain. Statement 2 true.
\( X/Z = 2.0/0.5 = 4 \). Statement 3 true.
Statement 4 false: \( k = 1 \) gives an L–S fabric (both lineation and foliation). Pure lineation (L-tectonite) needs \( k \gg 1 \).
Practice Q7. A vertical borehole drilled through a right-way-up sedimentary sequence (units A, oldest, to E, youngest; normal order E–D–C–B–A downwards) logs: E, D, C, D, C, B, A. Which interpretation fits best?
(a) A normal fault cutting the borehole within unit C (b) A thrust (reverse) fault cutting the borehole within or at the base of unit C (c) An angular unconformity at the base of unit C (d) An overturned recumbent fold limb affecting the whole sequence
Answer: (b)
Units D and C are repeated. In a vertical hole through a normal sequence, repetition indicates a reverse or thrust fault, which stacks a copy of the section on top of itself. A normal fault omits units. An unconformity would remove beds, not repeat them. An overturned limb would show units in reverse order (C, D, E), not the same order repeated.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Sign convention | compression positive; \( \sigma_1 \geq \sigma_2 \geq \sigma_3 \) |
| Stress on a plane | \( \sigma_n = \frac{\sigma_1+\sigma_3}{2} + \frac{\sigma_1-\sigma_3}{2}\cos 2\theta \), \( \tau = \frac{\sigma_1-\sigma_3}{2}\sin 2\theta \) |
| Max shear | \( (\sigma_1 - \sigma_3)/2 \), on planes at 45° |
| Coulomb | \( \tau = C + \mu\sigma_n \); fracture at \( 45° - \phi/2 \) to \( \sigma_1 \) (about 30°) |
| Byerlee | \( \tau \approx 0.85\sigma_n \) (low), \( 50 + 0.6\sigma_n \) MPa (high) |
| Effective stress | \( \sigma' = \sigma - P_f \); circle shifts left |
| Anderson | \( \sigma_1 \) vertical normal (60°); \( \sigma_3 \) vertical thrust (30°); \( \sigma_2 \) vertical strike-slip (90°) |
| Strain | \( e = \Delta l/l_0 \), \( S = 1 + e \), \( \lambda = S^2 \), \( \gamma = \tan\psi \) |
| Flinn | \( k = (a-1)/(b-1) \): >1 prolate, =1 plane, <1 oblate |
| Rheology | elastic \( \sigma = E\varepsilon \); viscous \( \sigma = \eta\dot\varepsilon \); Maxwell time \( \eta/\mu \) |
| Brittle–ductile | quartz crust about 10–15 km, about 300 °C |
| Fleuty | gentle 120–180, open 70–120, close 30–70, tight 0–30, isoclinal 0 |
| Ramsay | 1B parallel, 2 similar, 3 divergent isogons |
| Joints | mode I, perpendicular to \( \sigma_3 \); columnar (cooling), sheeting (unloading); plumose marks |
| Faults | throw \( d\sin\delta \), heave \( d\cos\delta \); normal omits, thrust repeats |
| Fault rocks | breccia, gouge (incohesive); cataclasite, mylonite, pseudotachylyte (cohesive) |
Key Takeaways
What’s Next
- Earthquakes: Causes, Measurement and Seismicity: what happens when stress on a fault is released suddenly.
- Paleomagnetism, Sea-Floor Spreading and Plate Tectonics: the plate-scale forces behind folds and faults.
- Seismology Basics and Earth’s Internal Structure: revisit elastic moduli and velocities.