Skip to content

Crystal Field Theory, Mineral Spectroscopy and Lattice Defects

CSIR NET Earth Sciences Part C geology: crystal field splitting, OSPE and site preference, mineral colour, Mössbauer, IR, Raman, point defects, twins.

  • 20 min read
  • Updated
On this page · 13 sections
  1. Prerequisites
  2. The Hook: Why Ruby Is Red and Emerald Is Green
  3. Crystal Field Theory in Minerals
  4. Colour and Optical Absorption
  5. Mineral Spectroscopy: What Each Method Sees
  6. Lattice Defects
  7. Memory Tricks
  8. Don’t Confuse
  9. Common Mistakes
  10. Practice
  11. Quick Revision Table
  12. Key Takeaways
  13. What’s Next

Prerequisites

The Hook: Why Ruby Is Red and Emerald Is Green

Crystal Field Theory in Minerals

Splitting of the d orbitals

In a free ion the five 3d orbitals are degenerate. Surrounded by anions (O\(^{2-}\) in silicates and oxides), orbitals pointing at the anions are raised in energy and those pointing between them are lowered.

SiteLower setUpper setSplittingBarycentre rule
Octahedral (6-fold)\( t_{2g} \) (\( d_{xy}, d_{yz}, d_{xz} \))\( e_g \) (\( d_{z^2}, d_{x^2-y^2} \))\( \Delta_o = 10Dq \)\( t_{2g} \) at \( -0.4\Delta_o \), \( e_g \) at \( +0.6\Delta_o \)
Tetrahedral (4-fold)\( e \)\( t_2 \)\( \Delta_t \approx \tfrac{4}{9}\Delta_o \)\( e \) at \( -0.6\Delta_t \), \( t_2 \) at \( +0.4\Delta_t \)
Cubic (8-fold)\( e \)\( t_2 \)\( \Delta_c \approx \tfrac{8}{9}\Delta_o \)as tetrahedral

\( \Delta \) grows with cation charge (\( \Delta \) for M\(^{3+}\) is larger than for M\(^{2+}\)), with shorter metal–oxygen distance (roughly as \( R^{-5} \) in the point-charge model), and with pressure, which shortens bonds.

Mineral sites are rarely perfect octahedra. The M1 and M2 sites of olivine and pyroxene are distorted, which splits the levels further and produces several absorption bands where an ideal octahedron would give one.

Crystal field stabilisation energy

CFSE is the net lowering of energy of the d electrons relative to the barycentre. In oxygen-coordinated minerals, Fe, Mn, Co and Ni are almost always high-spin at crustal and upper-mantle conditions (oxygen is a weak-field ligand). Pressure increases \( \Delta \), and spin transitions of Fe in lower-mantle minerals (ferropericlase, bridgmanite) are an active research area.

Iond\(^n\)Octahedral (HS) configurationCFSE (oct)CFSE (tet)
Ti\(^{3+}\)d\(^1\)\( t_{2g}^1 \)\( -0.4\Delta_o \)\( -0.6\Delta_t \)
V\(^{3+}\)d\(^2\)\( t_{2g}^2 \)\( -0.8\Delta_o \)\( -1.2\Delta_t \)
Cr\(^{3+}\)d\(^3\)\( t_{2g}^3 \)\( -1.2\Delta_o \)\( -0.8\Delta_t \)
Mn\(^{3+}\), Cr\(^{2+}\)d\(^4\)\( t_{2g}^3 e_g^1 \)\( -0.6\Delta_o \)\( -0.4\Delta_t \)
Mn\(^{2+}\), Fe\(^{3+}\)d\(^5\)\( t_{2g}^3 e_g^2 \)00
Fe\(^{2+}\)d\(^6\)\( t_{2g}^4 e_g^2 \)\( -0.4\Delta_o \)\( -0.6\Delta_t \)
Co\(^{2+}\)d\(^7\)\( t_{2g}^5 e_g^2 \)\( -0.8\Delta_o \)\( -1.2\Delta_t \)
Ni\(^{2+}\)d\(^8\)\( t_{2g}^6 e_g^2 \)\( -1.2\Delta_o \)\( -0.8\Delta_t \)
Cu\(^{2+}\)d\(^9\)\( t_{2g}^6 e_g^3 \)\( -0.6\Delta_o \)\( -0.4\Delta_t \)
Zn\(^{2+}\)d\(^{10}\)full00

Octahedral site preference energy

$$\boxed{\text{OSPE} = |\text{CFSE}_{\text{oct}}| - |\text{CFSE}_{\text{tet}}|}$$

Using \( \Delta_t = \tfrac{4}{9}\Delta_o \) and the same \( \Delta_o \) for each ion (a simplification for comparing patterns):

d\(^n\)CFSE octCFSE tetOSPE
d\(^3\) (Cr\(^{3+}\))\( 1.2\Delta_o \)\( 0.356\Delta_o \)\( 0.844\Delta_o \)
d\(^8\) (Ni\(^{2+}\))\( 1.2\Delta_o \)\( 0.356\Delta_o \)\( 0.844\Delta_o \)
d\(^4\), d\(^9\)\( 0.6\Delta_o \)\( 0.178\Delta_o \)\( 0.422\Delta_o \)
d\(^7\) (Co\(^{2+}\))\( 0.8\Delta_o \)\( 0.533\Delta_o \)\( 0.267\Delta_o \)
d\(^6\) (Fe\(^{2+}\))\( 0.4\Delta_o \)\( 0.267\Delta_o \)\( 0.133\Delta_o \)
d\(^5\), d\(^{10}\)000

Real values also scale with each ion’s own \( \Delta_o \), and Cr\(^{3+}\), being trivalent, has a much larger \( \Delta_o \) than Ni\(^{2+}\). The pattern still holds: Cr\(^{3+}\) and Ni\(^{2+}\) have the strongest preference for octahedral sites; Mn\(^{2+}\), Fe\(^{3+}\) and Zn\(^{2+}\) have none.

Geological consequences

ObservationCrystal field explanation
Ni is strongly compatible in olivine; Ni falls steeply in a fractionating basalthigh OSPE of Ni\(^{2+}\); olivine’s M sites are octahedral, while silicate melt offers many lower-coordinated sites
Cr is concentrated in spinel (chromite), clinopyroxene and garnet; chromitite layers form early in layered intrusionsvery high OSPE of Cr\(^{3+}\)
Magnetite is an inverse spinel, Fe\(^{3+}\)[Fe\(^{2+}\)Fe\(^{3+}\)]O\(_4\)Fe\(^{3+}\) (d\(^5\)) has no preference and fills the tetrahedral site; Fe\(^{2+}\) gains some CFSE in the octahedral site
Chromite FeCr\(_2\)O\(_4\) is a normal spinelCr\(^{3+}\) insists on octahedral sites
Mn\(^{2+}\) and Fe\(^{3+}\) enter tetrahedral or octahedral sites freelyzero CFSE for d\(^5\)
Fe\(^{2+}\) prefers the more distorted M2 site of orthopyroxene over M1extra stabilisation in the distorted site
Mn\(^{3+}\) and Cu\(^{2+}\) prefer distorted sitesJahn–Teller effect for d\(^4\) (HS) and d\(^9\)

Colour and Optical Absorption

CauseMechanismExamples
Crystal field (d–d) transitionselectron promoted between split d levels; spin-allowed bands are moderately intenseruby and emerald (Cr\(^{3+}\)); peridot (Fe\(^{2+}\) in olivine); green chrome diopside
Metal-to-metal (intervalence) charge transferelectron hops between neighbouring cations; intense, broad bandsblue sapphire (Fe\(^{2+}\) \( \to \) Ti\(^{4+}\)); Fe\(^{2+}\) \( \to \) Fe\(^{3+}\) in blue amphiboles, cordierite, vivianite
Oxygen-to-metal charge transferO\(^{2-}\) \( \to \) Fe\(^{3+}\) in the UV, tailing into the visibleyellow to red-brown in Fe\(^{3+}\)-bearing minerals
Colour centreselectron or hole trapped at a defect, often after natural irradiationpurple fluorite; smoky quartz (Al-associated hole centre); amethyst (Fe plus irradiation)
Band gapsemiconductor absorbs photons above its gapcinnabar (red), sphalerite (yellow to colourless when Fe-poor)
Physical (optics)interference, diffraction, scatteringlabradorescence, precious opal, moonstone adularescence

Ruby versus emerald. In ruby the Cr–O distances in corundum are short, \( \Delta \) is larger, and the main spin-allowed band sits in the yellow-green; red light is transmitted. In beryl the Cr site has a weaker field, the band shifts to lower energy (towards yellow-orange) and the transmission window moves to green. Alexandrite (Cr-bearing chrysoberyl) sits in between, so it looks green in daylight and red in incandescent light.

Idiochromatic minerals owe their colour to an essential constituent (malachite, azurite, rhodochrosite); allochromatic minerals to a trace impurity or defect (ruby, emerald, amethyst). Pleochroism in thin section (biotite, hornblende, tourmaline) arises because the absorbing transitions depend on the polarisation direction relative to distorted, oriented sites.

Remote sensing. Fe\(^{2+}\) in octahedral sites gives broad crystal field bands in the near infrared: olivine a composite band near 1 μm; pyroxenes two bands near 1 μm and 2 μm whose positions shift with Ca and Fe content. These bands are how olivine and pyroxene are mapped on the Moon, Mars and asteroids.

To convert band position: \( \lambda\,(\text{nm}) = 10^7/\tilde{\nu}\,(\text{cm}^{-1}) \). A band at 18,000 cm\(^{-1}\) is at 556 nm; at 10,000 cm\(^{-1}\) it is at 1,000 nm (1 μm). And 1 cm\(^{-1}\) \( \equiv \) 0.01196 kJ mol\(^{-1}\).

Mineral Spectroscopy: What Each Method Sees

TechniqueProbesMineralogical use
Optical (UV–Vis–NIR) absorptionelectronic transitions: d–d, charge transfercolour, oxidation state, site of transition metals, remote sensing
Infrared (IR)vibrations that change the dipole momentOH and H\(_2\)O (O–H stretch about 3,000–3,700 cm\(^{-1}\)); water in nominally anhydrous minerals; Si–O stretching about 800–1,200 cm\(^{-1}\); carbonate and sulphate groups
Ramanvibrations that change polarisabilityfast identification of polymorphs and inclusions: quartz main band near 464 cm\(^{-1}\), coesite near 521, diamond 1,332, graphite G band near 1,580 cm\(^{-1}\)
Mössbauer (\( ^{57}\)Fe)nuclear transitions of \( ^{57}\)Fe (14.4 keV gamma ray)Fe\(^{2+}\)/Fe\(^{3+}\) ratio, coordination, site occupancy, magnetic ordering
EPR (ESR)unpaired electronsMn\(^{2+}\), Fe\(^{3+}\), radiation-induced centres; ESR dating
NMR (MAS)nuclear spin environment (\( ^{29}\)Si, \( ^{27}\)Al, \( ^{1}\)H)Si polymerisation (Q\(^n\) species), Al coordination (4, 5, 6), Al–Si order in feldspars, glass structure
XANES / EXAFS (synchrotron)X-ray absorption edgesoxidation state and local coordination of a chosen element, even at low concentration
Cathodoluminescenceemission under an electron beamgrowth zoning in zircon, quartz, carbonates; guides spot dating

Mössbauer in more detail

A \( ^{57}\)Fe Mössbauer spectrum of a paramagnetic silicate is a set of doublets, one for each kind of Fe site.

  • Isomer shift (centre of the doublet) reflects s-electron density at the nucleus: larger for high-spin Fe\(^{2+}\) (roughly 1.0–1.3 mm s\(^{-1}\) relative to α-Fe) than for Fe\(^{3+}\) (roughly 0.2–0.5 mm s\(^{-1}\)). It identifies oxidation state, and within a valence it shifts with coordination.
  • Quadrupole splitting (separation of the two lines) reflects the asymmetry of the electric field at the nucleus. High-spin Fe\(^{2+}\) usually shows large splitting (one extra electron outside a half-filled shell); high-spin Fe\(^{3+}\) (spherical d\(^5\)) shows small splitting.
  • Area of each doublet is roughly proportional to the amount of Fe in that site (assuming equal recoil-free fractions), so Fe\(^{3+}\)/ΣFe can be read from area ratios.
  • Magnetically ordered phases (magnetite, hematite) give sextets from hyperfine magnetic splitting.

\( ^{29}\)Si MAS NMR and polymerisation

Silicate tetrahedra are labelled \( Q^n \), where \( n \) is the number of bridging oxygens (0 to 4). The \( ^{29}\)Si chemical shift becomes more negative as \( n \) increases, roughly from about −60 to −80 ppm for \( Q^0 \) (olivine) to about −100 to −120 ppm for \( Q^4 \) (quartz). Substituting Al for Si in neighbouring tetrahedra shifts the signal back to less negative values, which is how Al–Si ordering is studied.

graph TD
    Q[What do you need to know?] --> A[Fe2+ vs Fe3+ in a silicate]
    Q --> B[Which SiO2 polymorph is in an inclusion?]
    Q --> C[How much OH is in olivine?]
    Q --> D[Al coordination or Al-Si order]
    Q --> E[Growth zoning in zircon]
    A --> A1[Mossbauer; XANES; EPMA flank method]
    B --> B1[Raman micro-spectroscopy]
    C --> C1[FTIR, polarised]
    D --> D1[27Al and 29Si MAS NMR]
    E --> E1[Cathodoluminescence imaging]

Lattice Defects

Real crystals depart from perfect periodicity. Defects are classified by dimension.

Point defects (zero-dimensional)

DefectDescriptionCharge balanceExample
Schottkya cation vacancy and an anion vacancy, in stoichiometric ratiovacancies in the ratio of the formulaNaCl, KCl, MgO
Frenkelan ion leaves its site for an interstitial positionvacancy and interstitial of the same ionAgCl (cation); CaF\(_2\) (anion Frenkel)
Substitutional impurityforeign ion on a regular sitemay need a coupled substitution or vacancyCr\(^{3+}\) for Al\(^{3+}\) in corundum
Interstitial impurityforeign atom in an intersticeH\(^+\) in olivine, Na in beryl channels
Electronic defectselectrons and holes, small polarons (Fe\(^{3+}\) on an Fe\(^{2+}\) site)conduction in olivine and the upper mantle
Colour centreselectron trapped at an anion vacancy (F-centre) or hole trapped near an impuritypurple fluorite, smoky quartz

Point defects exist at equilibrium because they raise configurational entropy. For a Schottky pair with formation energy \( E_s \),

$$\boxed{\frac{n_s}{N} \approx \exp\!\left(-\frac{E_s}{2kT}\right)}$$

and for Frenkel defects \( n_f \approx \sqrt{N N_i}\,\exp(-E_f/2kT) \), where \( N_i \) is the number of interstitial sites. The factor 2 appears because each event creates two defects. Concentrations rise steeply with temperature.

Why they matter:

  • Diffusion in minerals proceeds mainly by vacancy and interstitial mechanisms, so diffusion rates (and hence closure temperatures in geochronology and the zoning of garnet) depend on defect concentration.
  • Electrical conductivity of the mantle reflects defects in olivine: small polarons, Mg vacancies and hydrogen. Magnetotelluric surveys use this to infer temperature and water content.
  • Non-stoichiometry: pyrrhotite Fe\(_{1-x}\)S has ordered Fe vacancies; wüstite is always Fe\(_{1-x}\)O.
  • Trace-element uptake often needs a vacancy or a coupled substitution to keep charge balance.

Line defects: dislocations

A dislocation is a line that bounds a region of the crystal that has slipped by one lattice vector, the Burgers vector \( \mathbf{b} \).

TypeRelation of \( \mathbf{b} \) to the lineMotion
Edge\( \mathbf{b} \perp \) line (extra half-plane)glides on its slip plane; climbs out of it by vacancy diffusion
Screw\( \mathbf{b} \parallel \) linecan cross-slip onto another plane
Mixedin between

Dislocation glide and climb are the basis of dislocation creep, the main mechanism of high-stress mantle flow, which produces lattice-preferred orientation of olivine and hence seismic anisotropy. In dry olivine at high temperature the dominant slip system is

\[100\]

(010). Dislocations can be seen by TEM, or by decoration (oxidising olivine makes them visible in the optical microscope). Low-angle (subgrain) boundaries are walls of dislocations formed by recovery.

Planar defects

DefectDescriptionMineral example
Grain boundaryinterface between crystals of different orientationall polycrystalline rocks; 120° triple junctions after annealing
Twin boundaryinterface between two related orientations of the same crystalsee twinning below
Stacking faulterror in a layer sequencemicas, chlorite, ZnS; source of polytypes
Antiphase boundaryinterface where the order of Al and Si (or cations) is out of steppigeonite, omphacite, anorthite (antiphase domains)
Exsolution lamella interfacecoherent or incoherent boundary between host and lamellaperthite, pyroxene lamellae

Twinning

A twin is a symmetrical intergrowth of two or more individuals of the same mineral related by a symmetry operation (the twin law) that is not a symmetry of the crystal itself: reflection across a twin plane, rotation about a twin axis, or inversion.

TypeCharacterExample
Contact twintwo individuals meet on a composition planespinel-law twins on \( \{111\} \); gypsum swallow-tail
Penetration twinindividuals interpenetrateCarlsbad twin in orthoclase; staurolite crosses; fluorite
Polysynthetic (repeated) twinmany parallel lamellae on the same lawalbite law in plagioclase (composition plane (010))
Cyclic twinseveral individuals around a common axischrysoberyl trillings; rutile

By origin: growth twins (formed during growth: Carlsbad, spinel law), transformation twins (formed when a high-symmetry phase inverts to lower symmetry: the cross-hatched “tartan” twinning of microcline, combining albite and pericline laws, formed from monoclinic K-feldspar; Dauphiné twins in quartz formed on cooling through the β-to-α transition), and deformation (mechanical) twins (formed by stress: calcite e-twins, used as a palaeo-piezometer, and some plagioclase lamellae).

Quartz shows two important laws: Dauphiné twins (rotation of 180° about c, both parts of the same handedness) and Brazil twins (left- and right-handed parts related by reflection).

Memory Tricks

Don’t Confuse

ThisvsThat
d–d (crystal field) band: weaker, on one ionCharge-transfer band: intense, between ions or O–metal
IR: dipole change; OH, H\(_2\)O, carbonateRaman: polarisability change; polymorphs, inclusions
Isomer shift: oxidation stateQuadrupole splitting: site distortion and electron asymmetry
Schottky: paired vacancies, density fallsFrenkel: vacancy plus interstitial, density nearly unchanged
Edge dislocation: \( \mathbf{b} \perp \) lineScrew dislocation: \( \mathbf{b} \parallel \) line
Growth twin: formed during crystallisationTransformation twin: formed on inversion to lower symmetry
Dauphiné twin: same handednessBrazil twin: opposite handedness
Idiochromatic: colour from essential elementAllochromatic: colour from trace impurity or defect

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which two divalent or trivalent first-row transition-metal ions have the largest octahedral site preference in oxygen-coordinated minerals?
  2. What does the isomer shift in a \( ^{57}\)Fe Mössbauer spectrum mainly indicate?
  3. Name the defect in which an ion moves from its regular site into an interstitial site.
Answers
  1. Cr\(^{3+}\) (d\(^3\)) and Ni\(^{2+}\) (d\(^8\)).
  2. The oxidation state (s-electron density at the nucleus), with a smaller dependence on coordination.
  3. Frenkel defect.

Level 2: Part B Style

Practice Q1. During fractional crystallisation of a basaltic magma, Ni decreases much faster than Mn in the residual melt. The best explanation is:

(a) Ni\(^{2+}\) is larger than Mn\(^{2+}\) and is excluded from olivine (b) Ni\(^{2+}\) has a large octahedral site preference energy, whereas Mn\(^{2+}\) has none (c) Ni is chalcophile and is lost to a sulphide liquid, while Mn is siderophile (d) Mn\(^{2+}\) has a Jahn–Teller distortion that favours melt

Answer: (b)

Ni\(^{2+}\) (d\(^8\)) gains \( 1.2\Delta_o \) in an octahedral site and so is strongly taken up by olivine’s octahedral M sites. Mn\(^{2+}\) (d\(^5\) high-spin) gains nothing, so it partitions by size and charge only. (c) has some truth for sulphide-saturated magmas, but Mn is not siderophile and the question describes ordinary silicate fractionation. (d) Jahn–Teller applies to d\(^4\) and d\(^9\), not d\(^5\).

Practice Q2. Fe\(^{2+}\) occupies an octahedral site in a silicate with \( \Delta_o = 10{,}000 \) cm\(^{-1}\). Its CFSE is closest to:

(a) 24 kJ mol\(^{-1}\) (b) 48 kJ mol\(^{-1}\) (c) 72 kJ mol\(^{-1}\) (d) 120 kJ mol\(^{-1}\)

Answer: (b) about 48 kJ/mol

High-spin Fe\(^{2+}\), \( t_{2g}^4 e_g^2 \): CFSE \( = 4(-0.4) + 2(0.6) = -0.4\Delta_o = -4{,}000 \) cm\(^{-1}\). Converting: \( 4{,}000 \times 0.011963 = 47.9 \) kJ mol\(^{-1}\). Option (d) uses \( 1.0\Delta_o \); option (c) uses \( 0.6\Delta_o \).

Practice Q3. Which technique is best suited to distinguish coesite from quartz in a 10 μm inclusion inside a garnet?

(a) Powder X-ray diffraction (b) Mössbauer spectroscopy (c) Raman micro-spectroscopy (d) \( ^{29}\)Si MAS NMR

Answer: (c)

Raman with a focused laser can analyse a micrometre-sized inclusion in place through the host, and the two polymorphs have different main bands (quartz near 464, coesite near 521 cm\(^{-1}\)). Powder XRD and NMR need the phase separated in bulk; Mössbauer needs iron.

Practice Q4. In a crystal, the fraction of Schottky defects is \( \exp(-E_s/2kT) \). If \( E_s = 2.0 \) eV, by about what factor does the defect fraction increase between 1,000 K and 1,200 K? (\( k = 8.617\times 10^{-5} \) eV K\(^{-1}\))

(a) 1.2 (b) 2.6 (c) 6.9 (d) 48

Answer: (c) about 6.9

\( n/N \) at 1,000 K \( = \exp(-2/(2\times 8.617\times10^{-5}\times 1000)) = \exp(-11.60) = 9.1\times 10^{-6} \). At 1,200 K: \( \exp(-9.67) = 6.3\times 10^{-5} \). Ratio \( = 6.9 \). Option (d) is the result of dropping the factor 2 (\( 6.9^2 \approx 48 \)).

Level 3: Part C Style

Practice Q5. Using \( \Delta_t = \tfrac{4}{9}\Delta_o \) and assuming all ions are high-spin with the same \( \Delta_o \), rank the octahedral site preference of Fe\(^{2+}\), Co\(^{2+}\), Ni\(^{2+}\) and Mn\(^{2+}\).

(a) Ni > Co > Fe > Mn (b) Co > Ni > Fe > Mn (c) Ni > Fe > Co > Mn (d) Mn > Fe > Co > Ni

Answer: (a) Ni > Co > Fe > Mn
Ionoct CFSEtet CFSE (\( \times\tfrac49 \))OSPE
Ni\(^{2+}\) d\(^8\)\( 1.2\Delta_o \)\( 0.8\Delta_t = 0.356\Delta_o \)\( 0.844\Delta_o \)
Co\(^{2+}\) d\(^7\)\( 0.8\Delta_o \)\( 1.2\Delta_t = 0.533\Delta_o \)\( 0.267\Delta_o \)
Fe\(^{2+}\) d\(^6\)\( 0.4\Delta_o \)\( 0.6\Delta_t = 0.267\Delta_o \)\( 0.133\Delta_o \)
Mn\(^{2+}\) d\(^5\)000

Note that Co\(^{2+}\) gains more CFSE in a tetrahedral site (\( 1.2\Delta_t \)) than any other divalent ion in this list, which is why Co\(^{2+}\) is common in tetrahedral sites (blue cobalt glasses and spinels), yet its OSPE is still positive.

Practice Q6. A Mössbauer spectrum of a clinopyroxene shows two doublets:

DoubletIsomer shift (mm s\(^{-1}\), rel. α-Fe)Quadrupole splitting (mm s\(^{-1}\))Area (%)
A1.152.1062
B0.380.7538

Which statements are correct?

  1. Doublet A is high-spin Fe\(^{2+}\) and doublet B is Fe\(^{3+}\).
  2. Fe\(^{3+}\)/ΣFe is about 0.38 if recoil-free fractions are equal.
  3. If total FeO\(_\text{T}\) by microprobe is 10.0 wt%, the Fe\(_2\)O\(_3\) content is about 4.2 wt%.
  4. The absence of a sextet shows that no magnetite inclusions large enough to be magnetically ordered are present in significant amounts.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2 and 4 only (d) 1, 2, 3 and 4

Answer: (d) all four
  • 1 true: large shift and large splitting are typical of Fe\(^{2+}\); small shift and splitting of Fe\(^{3+}\).
  • 2 true: area ratio \( 38/(62 + 38) = 0.38 \).
  • 3 true: Fe\(^{3+}\) as FeO \( = 0.38 \times 10.0 = 3.80 \) wt%. Converting FeO to Fe\(_2\)O\(_3\) multiplies by \( M(\text{Fe}_2\text{O}_3)/(2M(\text{FeO})) = 159.69/143.69 = 1.111 \): \( 3.80 \times 1.111 = 4.22 \) wt%. (FeO then is \( 6.20 \) wt%.)
  • 4 true: magnetically ordered magnetite at room temperature gives six-line patterns; none are seen, so any magnetite is below detection.

Practice Q7. A colourless quartz crystal turns smoky brown after gamma irradiation, and the colour disappears on heating to a few hundred degrees Celsius. A second, nearly Al-free synthetic quartz shows no colour after the same dose. What is the best interpretation?

(a) Irradiation oxidised Fe\(^{2+}\) to Fe\(^{3+}\), creating an O \( \to \) Fe\(^{3+}\) charge-transfer band (b) Irradiation created a hole trapped at an oxygen next to Al\(^{3+}\) substituting for Si\(^{4+}\) (a colour centre), which heating anneals (c) Irradiation produced Schottky defects that scatter light (d) Irradiation converted some quartz into coesite

Answer: (b)

The colour needs Al (absent in the second sample), forms on irradiation and bleaches on mild heating: the signature of a colour centre. The Al\(^{3+}\) for Si\(^{4+}\) substitution, charge-balanced by an alkali or H\(^+\), is the precursor; irradiation removes an electron from a neighbouring oxygen and the compensating ion moves away. (d) is impossible at low pressure; (c) would not give a specific absorption band; (a) cannot explain the Al dependence.

Quick Revision Table

IdeaFact
Octahedral split\( t_{2g} \) at \( -0.4\Delta_o \), \( e_g \) at \( +0.6\Delta_o \)
Tetrahedral split\( e \) at \( -0.6\Delta_t \), \( t_2 \) at \( +0.4\Delta_t \); \( \Delta_t = \tfrac49\Delta_o \)
Largest OSPECr\(^{3+}\), Ni\(^{2+}\) (\( 0.844\Delta_o \)); zero for d\(^5\), d\(^{10}\)
Spinelsmagnetite inverse; chromite normal
Jahn–Tellerd\(^4\) HS (Mn\(^{3+}\)), d\(^9\) (Cu\(^{2+}\))
Ruby / emeraldCr\(^{3+}\), strong / weaker field
Blue sapphireFe\(^{2+}\)–Ti\(^{4+}\) charge transfer
Fe\(^{2+}\) NIR bandsolivine about 1 μm; pyroxene about 1 and 2 μm
MössbauerFe\(^{2+}\): larger isomer shift and quadrupole splitting; areas give Fe\(^{3+}\)/ΣFe
Ramanquartz 464, coesite 521, diamond 1,332, graphite 1,580 cm\(^{-1}\)
\( ^{29}\)Si NMRmore negative shift with higher \( Q^n \)
Schottky\( n/N = e^{-E_s/2kT} \); paired vacancies (NaCl, MgO)
Frenkelvacancy plus interstitial (AgCl; anion in CaF\(_2\))
Dislocationsedge \( \mathbf{b}\perp \) line; screw \( \mathbf{b}\parallel \) line; olivine \[100\](010)
Twinsgrowth (Carlsbad, spinel), transformation (microcline tartan, Dauphiné), deformation (calcite e-twins)

Key Takeaways

What’s Next