Skip to content

Crystal Symmetry, Reciprocal Lattice and Diffraction

CSIR NET Earth Sciences Part C geology: point groups, space groups, Bravais lattices, reciprocal lattice, Bragg's law, structure factor and absences.

  • 22 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Why Garnets Never Grow as Pentagons
  3. Lattice, Motif and Crystal
  4. Symmetry Elements and Hermann–Mauguin Symbols
  5. The Seven Crystal Systems and 32 Point Groups
  6. The 14 Bravais Lattices
  7. Space Groups
  8. The Reciprocal Lattice
  9. Diffraction
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: Why Garnets Never Grow as Pentagons

Lattice, Motif and Crystal

A crystal is a three-dimensional periodic arrangement of atoms. It is described as

$$\text{crystal structure} = \text{lattice} + \text{motif (basis)}$$
  • A lattice is an infinite array of points, each with identical surroundings. It is generated by three non-coplanar translation vectors \( \mathbf{a}, \mathbf{b}, \mathbf{c} \): every lattice point is at \( u\mathbf{a} + v\mathbf{b} + w\mathbf{c} \) with integer \( u, v, w \).
  • The unit cell is the parallelepiped on \( \mathbf{a}, \mathbf{b}, \mathbf{c} \), with edge lengths \( a, b, c \) and interaxial angles \( \alpha \) (between b and c), \( \beta \) (between a and c), \( \gamma \) (between a and b).
  • A primitive cell contains one lattice point. A centred cell is chosen when it shows the full symmetry more clearly, at the cost of holding more than one lattice point.

The crystallographic restriction

A rotation that maps a lattice onto itself must have an integer trace in the lattice basis. For a rotation by \( \phi = 2\pi/n \), the trace is \( 1 + 2\cos\phi \), so \( 2\cos\phi \) must be an integer: \( -2, -1, 0, 1, 2 \).

\( 2\cos\phi \)\( \phi \)\( n \)
20° (360°)1
160°6
090°4
−1120°3
−2180°2

So only 1, 2, 3, 4 and 6-fold axes are allowed. Five-fold, seven-fold and higher axes are forbidden in periodic crystals. (Quasicrystals show “forbidden” diffraction symmetries precisely because they are not periodic.)

Symmetry Elements and Hermann–Mauguin Symbols

ElementH–M symbolOperation
Rotation axis1, 2, 3, 4, 6rotate by 360°/n
Mirror planemreflect
Centre of symmetry\( \bar{1} \)invert through a point
Rotoinversion axis\( \bar{3}, \bar{4}, \bar{6} \)rotate by 360°/n then invert
Screw axis (space groups)\( 2_1, 3_1, 3_2, 4_1, 4_2, 6_1, \ldots \)rotate and translate along the axis
Glide plane (space groups)a, b, c, n, dreflect and translate parallel to the plane

Equivalences worth knowing: \( \bar{2} = m \) (a mirror perpendicular to the axis); \( \bar{3} = 3 + \bar{1} \); \( \bar{6} = 3/m \). The \( \bar{4} \) axis is unique: it is not equivalent to any combination of simpler elements.

A symbol such as 2/m means a 2-fold axis with a mirror plane perpendicular to it. In a full symbol like \( \frac{4}{m}\frac{2}{m}\frac{2}{m} \), each position refers to a particular set of directions in the crystal system.

The Seven Crystal Systems and 32 Point Groups

A point group (crystal class) is a set of symmetry operations that leave at least one point fixed. Combining the allowed axes with mirrors and inversion gives exactly 32 crystallographic point groups. Each belongs to one of seven crystal systems, defined by its minimum symmetry.

SystemMinimum symmetryCell constraintsHolohedry (highest class)Mineral examples
Triclinic1 or \( \bar{1} \)none\( \bar{1} \)microcline, albite, kyanite
Monoclinicone 2 or m\( \alpha = \gamma = 90^\circ \)2/morthoclase, augite, muscovite, gypsum
Orthorhombicthree 2 or mall 90°\( \frac{2}{m}\frac{2}{m}\frac{2}{m} \) (mmm)olivine, orthopyroxene, aragonite, sillimanite
Tetragonalone 4 or \( \bar{4} \)\( a = b \), all 90°\( \frac{4}{m}\frac{2}{m}\frac{2}{m} \)zircon, rutile, vesuvianite, chalcopyrite
Trigonalone 3 or \( \bar{3} \)rhombohedral or hexagonal axes\( \bar{3}\frac{2}{m} \)calcite, quartz (low), corundum, tourmaline
Hexagonalone 6 or \( \bar{6} \)\( a = b \), \( \gamma = 120^\circ \)\( \frac{6}{m}\frac{2}{m}\frac{2}{m} \)beryl, apatite, high quartz
Cubic (isometric)four 3-fold axes\( a = b = c \), all 90°\( \frac{4}{m}\bar{3}\frac{2}{m} \) (m\( \bar{3} \)m)halite, garnet, spinel, galena, pyrite, diamond

Number of point groups per system: triclinic 2, monoclinic 3, orthorhombic 3, tetragonal 7, trigonal 5, hexagonal 7, cubic 5. Total 32.

Order of the group and forms

The order of a point group is the number of its symmetry operations. A general form \( \{hkl\} \) (a face in a general position) has as many faces as the order of the group.

Point groupOrderGeneral form
\( \bar{1} \)2pinacoid
2/m4prism
mmm8rhombic dipyramid
4/mmm16ditetragonal dipyramid
\( \bar{3} \)m12scalenohedron (calcite’s “dogtooth” spar)
6/mmm24dihexagonal dipyramid
m\( \bar{3} \)m48hexoctahedron

Special forms in m\( \bar{3} \)m: cube \( \{100\} \) 6 faces, octahedron \( \{111\} \) 8, rhombic dodecahedron \( \{110\} \) 12, trapezohedron \( \{hkk\} \) such as \( \{211\} \) 24. Garnet typically shows \( \{110\} \) and \( \{211\} \); spinel and magnetite \( \{111\} \); galena and halite \( \{100\} \); pyrite \( \{100\} \) and the pyritohedron \( \{210\} \) (12 pentagonal faces that are not regular pentagons).

Physical properties and the point group

  • Laue classes. Diffraction patterns are centrosymmetric (Friedel’s law, \( I_{hkl} = I_{\bar{h}\bar{k}\bar{l}} \) in the absence of anomalous scattering). Adding a centre to each of the 32 groups gives the 11 Laue classes. A diffraction pattern alone cannot normally tell 32 from \( \bar{3}2/m \).
  • Piezoelectricity needs the absence of a centre of symmetry. Of the 21 non-centrosymmetric classes, 20 can be piezoelectric (class 432 cannot). Quartz (class 32) is the industrial example.
  • Pyroelectricity needs a unique polar direction: only the 10 polar classes (1, 2, m, mm2, 3, 3m, 4, 4mm, 6, 6mm). Tourmaline (3m) is the mineral example.
  • Optical properties follow the system: cubic minerals are isotropic; tetragonal, trigonal and hexagonal minerals are uniaxial; orthorhombic, monoclinic and triclinic minerals are biaxial.

The 14 Bravais Lattices

Combining the seven systems with possible centrings gives 14 Bravais lattices:

CentringSymbolExtra lattice pointsLattice points per cell
PrimitivePnone1
Body-centredI\( (\tfrac12,\tfrac12,\tfrac12) \)2
Face-centred (all faces)F\( (\tfrac12,\tfrac12,0), (\tfrac12,0,\tfrac12), (0,\tfrac12,\tfrac12) \)4
Base (one face) centredA, B or Ce.g. C: \( (\tfrac12,\tfrac12,0) \)2
RhombohedralRin hexagonal setting: \( (\tfrac23,\tfrac13,\tfrac13), (\tfrac13,\tfrac23,\tfrac23) \)3 (hexagonal cell)

Distribution: triclinic P; monoclinic P, C; orthorhombic P, C, I, F; tetragonal P, I; hexagonal P; trigonal R (and P, shared with hexagonal); cubic P, I, F. That is 1 + 2 + 4 + 2 + 1 + 1 + 3 = 14.

Why no tetragonal C? A C-centred tetragonal cell can always be redrawn as a smaller primitive tetragonal cell. Why no cubic C? C-centring breaks the 3-fold axes.

Space Groups

A space group combines a Bravais lattice with the point-group operations and the translational elements (screw axes and glide planes). There are 230 space groups. The symbol starts with the lattice letter, followed by the symmetry along the characteristic directions.

MineralSpace groupPoint group
Halite, galena, periclaseFm\( \bar{3} \)mm\( \bar{3} \)m
Diamond, spinel, magnetiteFd\( \bar{3} \)mm\( \bar{3} \)m
GarnetIa\( \bar{3} \)dm\( \bar{3} \)m
SphaleriteF\( \bar{4} \)3m\( \bar{4} \)3m
PyritePa\( \bar{3} \)m\( \bar{3} \)
OlivinePbnm (standard setting Pnma)mmm
OrthoenstatitePbcammm
DiopsideC2/c2/m
Sanidine, orthoclaseC2/m2/m
Microcline, low albiteC\( \bar{1} \)\( \bar{1} \)
ZirconI4\(_1\)/amd4/mmm
RutileP4\(_2\)/mnm4/mmm
Calcite, corundumR\( \bar{3} \)c\( \bar{3} \)m
Low quartzP3\(_1\)21 or P3\(_2\)21 (enantiomorphs)32

To get the point group from a space group, drop the lattice letter, replace every screw axis by the plain rotation axis (\( 2_1 \to 2 \), \( 4_2 \to 4 \)) and every glide plane by m. Thus Pbnm \( \to \) mmm, and I4\(_1\)/amd \( \to \) 4/mmm.

graph TD
    A[Allowed rotations: 1, 2, 3, 4, 6] --> B[32 point groups]
    B --> C[7 crystal systems]
    C --> D[14 Bravais lattices: add centring]
    B --> E[230 space groups]
    D --> E
    F[Screw axes and glide planes] --> E
    B --> G[11 Laue classes: add a centre]

The Reciprocal Lattice

Definition

For a direct lattice with vectors \( \mathbf{a}, \mathbf{b}, \mathbf{c} \) and cell volume \( V = \mathbf{a}\cdot(\mathbf{b}\times\mathbf{c}) \), the reciprocal vectors are (crystallographers’ convention, without \( 2\pi \)):

$$\mathbf{a}^* = \frac{\mathbf{b}\times\mathbf{c}}{V}, \qquad \mathbf{b}^* = \frac{\mathbf{c}\times\mathbf{a}}{V}, \qquad \mathbf{c}^* = \frac{\mathbf{a}\times\mathbf{b}}{V}$$

so that \( \mathbf{a}_i\cdot\mathbf{a}_j^* = \delta_{ij} \). Physicists include a factor \( 2\pi \); the geometry is the same.

Key properties

  1. The reciprocal lattice vector \( \mathbf{G}_{hkl} = h\mathbf{a}^* + k\mathbf{b}^* + l\mathbf{c}^* \) is perpendicular to the lattice planes \( (hkl) \).
  2. Its length is the reciprocal of the interplanar spacing: $$\boxed{|\mathbf{G}_{hkl}| = \frac{1}{d_{hkl}}}$$
  3. For orthogonal axes, \( a^* = 1/a \), \( b^* = 1/b \), \( c^* = 1/c \). For oblique axes this is not true: in a monoclinic cell \( a^* = 1/(a\sin\beta) \).
  4. The reciprocal of an F lattice is an I lattice, and vice versa. The reciprocal of the reciprocal lattice is the direct lattice. \( V^* = 1/V \).

d-spacing formulas

From \( 1/d^2 = |\mathbf{G}|^2 \):

System\( 1/d_{hkl}^2 \)
Cubic\( (h^2 + k^2 + l^2)/a^2 \)
Tetragonal\( (h^2 + k^2)/a^2 + l^2/c^2 \)
Orthorhombic\( h^2/a^2 + k^2/b^2 + l^2/c^2 \)
Hexagonal\( \tfrac{4}{3}(h^2 + hk + k^2)/a^2 + l^2/c^2 \)

Worked example. Forsterite (Pbnm setting) has \( a = 4.756 \), \( b = 10.207 \), \( c = 5.980 \) Å. For (130):

$$\frac{1}{d^2} = \frac{1}{4.756^2} + \frac{9}{10.207^2} + 0 = 0.04421 + 0.08638 = 0.1306\ \text{Å}^{-2}$$

so \( d_{130} = 2.767 \) Å. With Cu K\( \alpha \) radiation this lies near \( 2\theta = 32.3^\circ \), one of the strong olivine peaks used to identify it in powder patterns.

Diffraction

Bragg’s law

X-rays scattered from successive planes of spacing \( d \) reinforce when their path difference is a whole number of wavelengths:

$$\boxed{n\lambda = 2d\sin\theta}$$

Here \( \theta \) is the angle between the beam and the planes (half the scattering angle \( 2\theta \)). In practice the order \( n \) is absorbed into the indices: the second-order reflection from (100) is written as the first-order reflection 200 from planes of spacing \( d/2 \). Since \( \sin\theta \le 1 \), only planes with \( d \ge \lambda/2 \) can diffract.

Common wavelengths: Cu K\( \alpha_1 \) = 1.5406 Å (powder diffractometers); Mo K\( \alpha \) about 0.71 Å (single-crystal work, reaches more reflections).

Laue equations and the Ewald sphere

Bragg’s law is equivalent to the Laue condition \( \mathbf{k}' - \mathbf{k} = \mathbf{G}_{hkl} \): the change in the wave vector (magnitude \( 1/\lambda \)) must equal a reciprocal lattice vector. Geometrically, draw a sphere of radius \( 1/\lambda \) (the Ewald sphere) through the origin of the reciprocal lattice; every reciprocal lattice point that lies on the sphere gives a diffracted beam. A single crystal hit by monochromatic radiation satisfies this only for a few points, so the crystal is rotated (single-crystal methods), many orientations are present at once (powder method), or a range of wavelengths is used (Laue method).

The structure factor

The amplitude scattered by one unit cell into reflection \( hkl \) is

$$\boxed{F_{hkl} = \sum_{j} f_j \exp\!\left[2\pi i\,(h x_j + k y_j + l z_j)\right]}$$

where \( f_j \) is the atomic scattering factor of atom \( j \) (roughly proportional to its number of electrons, falling with \( \sin\theta/\lambda \)) and \( (x_j, y_j, z_j) \) are its fractional coordinates. The measured intensity is \( I_{hkl} \propto |F_{hkl}|^2 \) (multiplied by multiplicity, Lorentz-polarisation, absorption and temperature factors). The phase of \( F \) is lost in the measurement; recovering it is the phase problem of structure solution.

Systematic absences

Centring and translational symmetry make whole sets of reflections vanish.

Body centring (I). Atoms at \( (0,0,0) \) and \( (\tfrac12,\tfrac12,\tfrac12) \):

$$F = f\left[1 + e^{\pi i (h+k+l)}\right] = \begin{cases} 2f & h+k+l \text{ even} \\ 0 & h+k+l \text{ odd} \end{cases}$$

Face centring (F). Atoms at the origin and the three face centres: \( F = 4f \) if \( h, k, l \) are all even or all odd (“unmixed”); \( F = 0 \) if mixed.

Lattice or elementReflections presentAllowed cubic \( h^2+k^2+l^2 \)
Pall1, 2, 3, 4, 5, 6, 8, 9, … (never 7, 15, …)
I\( h+k+l \) even2, 4, 6, 8, 10, 12, 14, 16 (ratio 1:2:3:4:5:6:7:8)
F\( h,k,l \) unmixed3, 4, 8, 11, 12, 16, 19, 20
C\( h+k \) even
\( 2_1 \) screw along c\( 00l \): \( l \) even only
c-glide \( \perp \) b\( h0l \): \( l \) even only

Lattice centring removes reflections throughout reciprocal space (“general” absences). Glide planes affect one zone (zonal absences), and screw axes one row (serial absences). Together these narrow a crystal down to a few possible space groups.

Methods used on minerals

MethodSampleGives
Powder XRDfine powder, many orientationsphase identification (fingerprint of d and I), cell parameters, quantitative phase analysis (Rietveld), crystallite size
Single-crystal XRDone crystalfull structure: atom positions, site occupancies, space group
Neutron diffractionlarger sampleslight atoms (H), Mg vs Al or Fe vs Mn contrast, magnetic structure
Electron diffraction (TEM)thin foilnanoscale phases, exsolution lamellae, antiphase domains, polytypes
Synchrotron XRDtiny or high-pressure samples (diamond-anvil cell)high-pressure phases such as bridgmanite

Crystallite size (Scherrer). Peak broadening by small crystallites: \( t = K\lambda/(\beta\cos\theta) \), with \( K \approx 0.9 \) and \( \beta \) the full width at half maximum in radians, after removing instrumental broadening. Strain also broadens peaks, with a \( \tan\theta \) dependence.

Indexing a cubic powder pattern

For a cubic crystal,

$$\sin^2\theta = \frac{\lambda^2}{4a^2}\,(h^2 + k^2 + l^2)$$

so the \( \sin^2\theta \) values of successive peaks stand in the ratio of the allowed integers \( N = h^2 + k^2 + l^2 \). Divide every \( \sin^2\theta \) by the smallest and look at the pattern:

  • 1 : 2 : 3 : 4 : 5 : 6 : 8 (no 7): primitive.
  • 1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 after doubling (that is, N = 2, 4, 6, …): body-centred.
  • 3 : 4 : 8 : 11 : 12 (ratios 1 : 1.33 : 2.67 : 3.67 : 4): face-centred.

Memory Tricks

Don’t Confuse

ThisvsThat
Point group: symmetry of the external form; leaves a point fixed (32)Space group: includes translations, screw axes, glides (230)
Crystal system: defined by minimum symmetryBravais lattice: system plus centring (14)
Screw axis \( 2_1 \): serial absences on one row (\( 00l \))Glide plane: zonal absences on one plane (\( h0l \))
Direct lattice spacing \( d \)Reciprocal vector length \( 1/d \)
Bragg angle \( \theta \)Scattering angle \( 2\theta \) (what the diffractometer records)
Laue class: point group plus a centre (11)Laue method: polychromatic X-rays on a stationary crystal
Pyritohedron \( \{210\} \): 12 irregular pentagonsRegular pentagonal dodecahedron: impossible in a crystal
Holohedral class: highest symmetry of the systemMerohedral classes: subgroups of it in the same system

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. How many faces does the general form of point group m\( \bar{3} \)m have, and what is it called?
  2. Which point group does the space group P2\(_1\)/c belong to?
  3. Which reflections are absent for a body-centred lattice?
Answers
  1. 48 faces, the hexoctahedron. The general form has as many faces as the order of the group.
  2. 2/m. Replace \( 2_1 \) by 2 and the c-glide by m.
  3. Those with \( h + k + l \) odd.

Level 2: Part B Style

Practice Q1. Halite has a cubic cell with \( a = 5.640 \) Å. Using Cu K\( \alpha_1 \) radiation (\( \lambda = 1.5406 \) Å), the 200 reflection appears at a \( 2\theta \) closest to:

(a) 15.9° (b) 27.4° (c) 31.7° (d) 45.4°

Answer: (c) 31.7°

\( d_{200} = a/\sqrt{4} = 2.820 \) Å. Then \( \sin\theta = 1.5406/(2\times 2.820) = 0.2732 \), so \( \theta = 15.85^\circ \) and \( 2\theta = 31.70^\circ \).

Option (a) is \( \theta \), not \( 2\theta \). Option (d) is close to the 220 reflection (\( d = 1.994 \) Å, \( 2\theta \approx 45.4^\circ \)).

Practice Q2. A mineral is piezoelectric and pyroelectric. Its point group could be:

(a) m\( \bar{3} \)m (b) 32 (c) 3m (d) \( \bar{3} \)m

Answer: (c) 3m

Pyroelectricity requires a polar class. 3m is polar (all its symmetry leaves the 3-fold axis direction unreversed), and being non-centrosymmetric it is also piezoelectric; tourmaline is the example. 32 (quartz) is piezoelectric but not polar, because its 2-fold axes reverse the c direction. m\( \bar{3} \)m and \( \bar{3} \)m are centrosymmetric.

Practice Q3. Which statement about the reciprocal lattice is incorrect?

(a) \( \mathbf{G}_{hkl} \) is normal to the (hkl) planes (b) \( |\mathbf{G}_{hkl}| = 1/d_{hkl} \) (c) The reciprocal of a face-centred cubic lattice is face-centred cubic (d) The volume of the reciprocal cell is \( 1/V \)

Answer: (c)

The reciprocal of an F lattice is an I lattice (and vice versa). The other three are standard properties.

Practice Q4. Low quartz has space group P3\(_1\)21. Which statement is correct?

(a) Its point group is \( \bar{3}m \) and it is centrosymmetric (b) Its point group is 32; P3\(_2\)21 is its mirror-image (enantiomorphous) form (c) It belongs to the hexagonal Bravais lattice with a 6-fold axis (d) Its \( 3_1 \) axis gives zonal absences in \( h0l \)

Answer: (b)

Replacing \( 3_1 \) by 3 gives point group 32, which has no centre (hence quartz is piezoelectric and occurs as left- and right-handed crystals). A screw axis gives serial absences along its own row (\( 000l \) with \( l \neq 3n \) absent), not zonal ones. Low quartz is trigonal, with a 3-fold axis.

Level 3: Part C Style

Practice Q5. A powder pattern of a cubic oxide, recorded with Cu K\( \alpha_1 \) (\( \lambda = 1.5406 \) Å), shows peaks at \( 2\theta \) = 36.93°, 42.91°, 62.30°, 74.68° and 78.62°. Which is correct?

(a) Primitive lattice, \( a \approx 2.98 \) Å (b) Body-centred lattice, \( a \approx 2.98 \) Å (c) Face-centred lattice, \( a \approx 4.21 \) Å (d) Face-centred lattice, \( a \approx 5.96 \) Å

Answer: (c) F lattice, a ≈ 4.21 Å (the pattern of periclase, MgO)

Compute \( \sin^2\theta \):

\( 2\theta \)\( \sin^2\theta \)ratio to first× 3hkl
36.930.100341.0003111
42.910.133781.3334200
62.300.267572.6678220
74.680.367913.66711311
78.620.401354.00012222

The integers 3, 4, 8, 11, 12 are the F sequence (indices unmixed). Then \( a = \lambda\sqrt{N}/(2\sin\theta) \); for 200, \( \sin\theta = 0.3658 \) and \( a = 1.5406\times 2/(2\times 0.3658) = 4.212 \) Å.

Option (b) is the trap of reading ratios 1 : 1.33 as the first members of a P or I sequence and using the wrong N.

Practice Q6. For a monoclinic crystal, consider the following observations on its single-crystal data: all \( hkl \) with \( h + k \) odd are absent; \( h0l \) with \( l \) odd are absent; no other absences. Which statements are correct?

  1. The lattice is C-centred.
  2. There is a c-glide perpendicular to b.
  3. The space group is consistent with C2/c, the space group of diopside.
  4. The point group must be 2.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • 1 true: \( h + k \) odd absent throughout is the C-centring condition.
  • 2 true: a zonal absence in \( h0l \) for \( l \) odd means a glide plane perpendicular to b with translation \( c/2 \).
  • 3 true: C2/c has exactly these conditions (Cc has the same ones, so diffraction alone cannot choose between them).
  • 4 false: the absences fit both C2/c (point group 2/m) and Cc (point group m); and Friedel’s law means the pattern shows Laue class 2/m in either case. Neither point group is 2.

Practice Q7. A periclase powder peak at \( 2\theta = 42.90^\circ \) (Cu K\( \alpha_1 \)) has a width (FWHM, corrected for instrumental broadening) of 0.20° in \( 2\theta \). Taking \( K = 0.9 \), the crystallite size is closest to:

(a) 4 nm (b) 43 nm (c) 85 nm (d) 430 nm

Answer: (b) about 43 nm

\( \beta = 0.20^\circ = 3.491\times 10^{-3} \) rad; \( \theta = 21.45^\circ \), \( \cos\theta = 0.9307 \).

$$t = \frac{0.9 \times 1.5406}{3.491\times 10^{-3} \times 0.9307} = 426.8\ \text{Å} \approx 43\ \text{nm}$$

Option (d) is the result in ångström read as nanometres; (c) comes from using half the width.

Quick Revision Table

IdeaFact
Allowed rotations1, 2, 3, 4, 6 (trace \( 1 + 2\cos\phi \) integer)
Counts7 systems, 14 Bravais lattices, 32 point groups, 230 space groups, 11 Laue classes
Cubicfour 3-fold axes; isotropic
Uniaxialtetragonal, trigonal, hexagonal
Order of m\( \bar{3} \)m48 (hexoctahedron)
Garnet habit\( \{110\} \) dodecahedron, \( \{211\} \) trapezohedron; Ia\( \bar{3} \)d
Piezoelectric20 of 21 non-centrosymmetric classes (not 432)
Pyroelectric10 polar classes
Reciprocal\( \mathbf{a}_i\cdot\mathbf{a}_j^* = \delta_{ij} \); \( \lvert\mathbf{G}_{hkl}\rvert = 1/d_{hkl} \); F \( \leftrightarrow \) I
Bragg\( n\lambda = 2d\sin\theta \); Cu K\( \alpha_1 \) = 1.5406 Å
Structure factor\( F = \sum f_j e^{2\pi i(hx+ky+lz)} \); \( I \propto \lvert F\rvert^2 \)
AbsencesI: \( h+k+l \) odd; F: mixed; C: \( h+k \) odd; \( 2_1\parallel c \): \( 00l \), \( l \) odd
Cubic F sequenceN = 3, 4, 8, 11, 12, 16
Scherrer\( t = 0.9\lambda/(\beta\cos\theta) \)

Key Takeaways

What’s Next