Indian Rock Suites
CSIR NET Earth Sciences Part C geology: Deccan Traps, anorthosites, carbonatites, charnockites, kimberlites, ophiolites and granitoids of India.
- 20 min
On this page · 17 sections
Prerequisites
- Melting, phase diagrams, fractionation and mixing: Magma Genesis, Phase Equilibria and Magma Mixing.
- Granulite facies, P–T paths and thermobarometry: Metamorphic Textures, Facies, Reactions and P–T–t Paths.
- The geological time scale and Sr isotopes: Geological Time Scale and Radiometric Dating.
- Mantle and crust structure: Seismology and Earth Structure.
The Hook: A Tombstone in Kolkata
Overview Map of the Suites
| Suite | Tectonic setting | Indian examples | Age (approximate) |
|---|---|---|---|
| Deccan Traps | continental flood basalt over a mantle plume | Western Ghats, Malwa plateau, Saurashtra, Kutch, Mandla lobe | latest Cretaceous to earliest Palaeogene, about 66 Ma |
| Anorthosites | Archaean layered complexes; Proterozoic massifs | Sittampundi (Tamil Nadu); Eastern Ghats massifs such as Chilka Lake and Bolangir | Archaean; Proterozoic |
| Carbonatites | continental rifts, plume margins | Amba Dongar (Gujarat); Sung Valley and Samchampi (Shillong plateau, Mikir Hills); Sevathur and Samalpatti (Tamil Nadu); Newania (Rajasthan) | Cretaceous–Palaeogene; Cretaceous; Proterozoic |
| Charnockites | granulite terrains | St Thomas Mount (Chennai), Nilgiri, Biligirirangan and Palni hills, Kerala Khondalite Belt, Eastern Ghats | Neoarchaean to Neoproterozoic–Cambrian |
| Kimberlites and lamproites | stable cratons | Wajrakarur and Narayanpet fields (Dharwar craton); Majhgawan (Panna, Madhya Pradesh) | mostly Mesoproterozoic |
| Ophiolites | Neo-Tethyan oceanic lithosphere | Nidar and Spontang (Ladakh); Naga Hills–Manipur; Andaman Islands | Jurassic–Cretaceous |
| Granitoids | Archaean crust building to Himalayan collision | Peninsular Gneiss (TTG), Closepet granite, Bundelkhand and Singhbhum granites, Malani suite, Ladakh batholith, Himalayan leucogranites | Archaean to Miocene |
Deccan Traps
Facts to know
- Extent: present outcrop roughly half a million square kilometres across western and central India; the original extent was much larger before erosion and rifting.
- Thickness: greatest in the Western Ghats, where the composite stratigraphic section exceeds a kilometre and approaches two; it thins eastward.
- Age: the bulk erupted within about a million years around the Cretaceous–Palaeogene boundary (about 66 Ma), mostly within one reversed-polarity magnetic chron (29r).
- Rocks: dominantly tholeiitic basalt in subhorizontal flows (hence “trap”, from the Swedish for stairs: the stepped landscape). Most flows are evolved (moderate Mg#), so the magmas fractionated in crustal reservoirs before eruption. Picritic basalts occur low in some sections; alkaline rocks, lamprophyres and carbonatites occur on the north-western margin (Kutch, Saurashtra, the Narmada region, Amba Dongar, and alkaline complexes in Rajasthan such as Mundwara and Sarnu–Dandali).
- Flow types: compound pahoehoe flows (many small lobes) dominate the lower formations; thick “simple” sheet flows dominate the upper formations.
- Between flows: red boles (weathered flow tops or thin soils, reddened by Fe oxidation); intertrappean beds of lake and river sediment with fossils (plants, ostracods, fish); beneath the lava pile in central India, the infratrappean Lameta Formation with dinosaur bones and eggs.
- Dykes: major swarms along the Narmada–Satpura–Tapi rift zone and parallel to the west coast; these are feeders.
- Weathering products: laterite and bauxite caps on the plateau; black cotton soil (regur).
Western Ghats stratigraphy
The Western Ghats sequence is divided by chemistry and isotopes (not visible lithology) into three subgroups:
| Subgroup | Formations (bottom to top) | Notes |
|---|---|---|
| Kalsubai | Jawhar, Igatpuri, Neral, Thakurvadi, Bhimashankar | lowest; includes picritic flows; compound pahoehoe common |
| Lonavala | Khandala, Bushe | Bushe: strongly crustally contaminated (high \( ^{87}\)Sr/\( ^{86}\)Sr) |
| Wai | Poladpur, Ambenali, Mahabaleshwar, Panhala, Desur | Ambenali: least contaminated, closest to the plume-derived composition; Mahabaleshwar shows a different, lithospheric contribution |
The formation chemistry is mapped using elements such as Ba, Sr, Ti and isotopes. Variation in \( ^{87}\)Sr/\( ^{86}\)Sr between formations is a textbook example of assimilation of continental crust by a plume-derived magma (see the mixing and AFC section of the magma genesis page).
Origin and significance
- Réunion plume: the Deccan is the starting plume head of the hotspot whose tail built the Chagos–Laccadive ridge and Réunion. Rifting between India and the Seychelles accompanied the eruption.
- K–Pg extinction: the eruption overlapped the Chicxulub impact. Huge releases of SO\(_2\) and CO\(_2\) from the traps are debated as a co-cause of the end-Cretaceous mass extinction.
- Comparison: the Rajmahal Traps (eastern India) are older, Early Cretaceous, associated with the Kerguelen plume and the Sylhet traps.
Anorthosites
Anorthosite is a plutonic rock with more than 90% plagioclase. Its existence is a puzzle: no ordinary mantle melt is that rich in plagioclase, so anorthosites must be cumulates or plagioclase-crystal mushes.
| Type | Plagioclase | Associated rocks | Setting | Indian example |
|---|---|---|---|---|
| Archaean (layered, megacrystic) | very calcic (bytownite–anorthite), equant megacrysts | layered gabbros, ultramafics, chromitite layers | Archaean greenstone and gneiss terrains | Sittampundi complex (Tamil Nadu) |
| Proterozoic massif-type | intermediate (andesine–labradorite) | mangerite, charnockite, rapakivi granite (the AMCG suite); Fe–Ti oxide ores; high-Al orthopyroxene megacrysts | Proterozoic orogenic and anorogenic belts | Eastern Ghats massifs (Chilka Lake, Bolangir) |
| Layered intrusion anorthosites | variable | in big mafic layered intrusions | intracratonic | (Bushveld and Stillwater abroad) |
| Lunar highland anorthosite | very calcic | primary crust | lunar magma ocean, plagioclase flotation | Apollo samples (not Indian) |
Petrogenesis of massif anorthosites (common model):
- Mantle-derived basaltic magma ponds at the base of thick crust.
- Mafic minerals crystallise and sink; plagioclase, less dense than the Fe-rich residual magma at those pressures, floats or accumulates as a mush.
- The buoyant plagioclase mush rises diapirically into the mid-crust.
- High-Al orthopyroxene megacrysts record the deep, high-pressure crystallisation stage.
graph TD
A[Mantle-derived basalt ponds at crust-mantle boundary] --> B[Olivine and pyroxene crystallise and sink]
B --> C[Plagioclase accumulates as buoyant mush]
C --> D[Diapiric ascent of plagioclase mush]
D --> E[Massif anorthosite in mid-crust]
A --> F[Heat melts lower crust]
F --> G[Mangerite, charnockite, granite: AMCG suite]Carbonatites
Carbonatite (IUGS): an igneous rock with more than 50% modal primary carbonate.
| Variety | Main carbonate | Notes |
|---|---|---|
| Calciocarbonatite | calcite | coarse = sövite; fine, hypabyssal = alvikite |
| Magnesiocarbonatite | dolomite | beforsite (dolomite carbonatite) |
| Ferrocarbonatite | Fe-rich carbonates (ankerite, siderite) | often REE-rich, late stages |
| Natrocarbonatite | Na–K–Ca carbonates | known erupting only at Ol Doinyo Lengai (Tanzania); low-temperature, black lava turning white on weathering |
Associated rocks: ijolite, melteigite, nepheline syenite, pyroxenite, melilitite (silica-undersaturated alkaline rocks), forming ring complexes. Country rocks around them are altered by alkali metasomatism (fenitisation: K–Na feldspar, sodic pyroxene and amphibole replace the host).
Geochemistry and economics: highest concentrations of Sr, Ba, light REE, Nb (pyrochlore), P (apatite) and F of any igneous rocks; very low SiO\(_2\). Carbonatites host the world’s main REE and Nb deposits. Amba Dongar is known for fluorite.
Origin (three hypotheses, not exclusive):
- Primary low-degree melts of carbonated peridotite at high pressure.
- Liquid immiscibility from CO\(_2\)-rich nephelinitic or melilititic magma.
- Residual liquids after extreme fractional crystallisation of a carbonated alkaline silicate magma.
Indian carbonatites:
| Region | Complexes | Context |
|---|---|---|
| Western India | Amba Dongar (Gujarat); alkaline complexes of Rajasthan | late-stage Deccan magmatism |
| North-eastern India | Sung Valley (Meghalaya), Samchampi (Mikir Hills, Assam) | Cretaceous; linked to the Kerguelen plume and Sylhet–Rajmahal magmatism |
| Southern India | Sevathur, Samalpatti and others in Tamil Nadu | Proterozoic, along major shear zones |
| North-western India | Newania (Rajasthan), dolomitic | Proterozoic |
Charnockites
Charnockite is an orthopyroxene-bearing granitoid (strictly, orthopyroxene granite; the charnockite series extends from orthopyroxene tonalite, “enderbite”, to orthopyroxene granite). Hand-specimen clues: dark greenish-grey to bluish colour, greasy or bluish quartz, waxy feldspar, often mesoperthite.
Two origins
| Igneous (magmatic) charnockite | Metamorphic charnockite |
|---|---|
| crystallised from a hot, relatively dry granitic magma in which orthopyroxene, not biotite or hornblende, was stable | formed by dehydration of amphibolite-facies gneiss during granulite-facies metamorphism |
| massive, homogeneous plutons; often with AMCG anorthosites | gradational with gneiss; patchy |
| low water activity from dehydration melting or from infiltration of CO\(_2\)-rich fluids |
The key reaction that makes orthopyroxene from a granitic gneiss:
$$\text{biotite} + \text{quartz} \;\to\; \text{orthopyroxene} + \text{K-feldspar} + \text{H}_2\text{O}\ (\text{or melt})$$Anything that lowers water activity (higher temperature, CO\(_2\) dilution of the fluid, removal of water into melt) drives it to the right.
Incipient (arrested) charnockites
In southern India, at quarries such as Kabbaldurga (Karnataka) and Ponmudi (Kerala Khondalite Belt), dark charnockite patches cut across amphibolite-facies gneiss along veins and shear fractures. CO\(_2\)-rich fluid inclusions in the charnockite patches led to the model of CO\(_2\) streaming (fluid infiltration lowering \( a_{\text{H}_2\text{O}} \)). Others attribute such patches to local melting and melt extraction. These “charnockite-in-the-making” exposures are a classic CSIR NET topic.
Where
The Southern Granulite Terrain (Nilgiri, Biligirirangan, Shevaroy, Palni hills, Madurai Block, Kerala Khondalite Belt) and the Eastern Ghats Belt. The transition from amphibolite-facies gneisses of the Dharwar craton southward into granulites marks the orthopyroxene-in isograd in Karnataka and Tamil Nadu. Ages range widely: Neoarchaean in the northern granulites and Neoproterozoic to Cambrian (Pan-African) in the south.
Kimberlites and Lamproites
Kimberlite
A volatile-rich (CO\(_2\), H\(_2\)O), potassic, ultrabasic hybrid rock with a characteristic inequigranular texture: rounded macrocrysts of olivine (mostly mantle xenocrysts) in a fine groundmass of olivine, phlogopite, monticellite, spinel, perovskite, calcite and serpentine. It carries mantle xenoliths (garnet peridotite, eclogite) and, rarely, diamond.
Pipe anatomy:
| Facies | Depth | Rock |
|---|---|---|
| Crater | surface | pyroclastic and reworked (epiclastic) kimberlite in a crater lake |
| Diatreme | upper 1–2 km | carrot-shaped body of tuffisitic kimberlite breccia |
| Root zone (hypabyssal) | deeper | coherent kimberlite dykes and sills |
Indicator minerals used in exploration: Cr-pyrope garnet (high-Cr, low-Ca “G10” garnets from harzburgite, associated with diamond), Cr-diopside, picroilmenite (Mg-rich ilmenite) and chromite. They survive in stream sediments and point upstream to a pipe.
Diamond stability. Diamond is stable at high pressure: at mantle temperatures beneath cratons, roughly above 4.5–5 GPa, which is about 140–155 km depth (\( h = P/\rho g \) with \( \rho \approx 3.3 \) g cm\(^{-3}\)). Kimberlite magma is generated deeper still and rises quickly, picking up diamonds from the base of the thick, cold lithosphere. Clifford’s rule: diamondiferous kimberlites occur on old (Archaean) cratons, where the lithospheric keel is thick enough to enter the diamond field.
Group I and Group II. Group I is “archetypal” kimberlite; Group II (orangeite), known mainly from southern Africa, is micaceous and closer to lamproite.
Lamproite
Ultrapotassic, peralkaline-tending, MgO-rich rocks with phlogopite (often Ti-rich), K-richterite, leucite, sanidine and diopside, and very high K and incompatible elements. Some lamproites are diamond-bearing (the Argyle deposit in Australia is the famous example).
Indian occurrences
- Wajrakarur kimberlite field (Anantapur district, Andhra Pradesh) and Narayanpet field (Telangana–Karnataka border), on the Eastern Dharwar craton; most dated to the Mesoproterozoic (about 1.1 Ga).
- Majhgawan pipe near Panna (Madhya Pradesh), mined by NMDC; its classification (kimberlite versus lamproite) has been debated.
- Historic “Golconda” diamonds came from alluvial gravels of the Krishna basin and from Proterozoic conglomerates such as the Banganapalle conglomerate of the Kurnool Group, not directly from pipes.
Ophiolites
An ophiolite is a slice of oceanic lithosphere thrust onto (obducted onto) a continental margin.
Penrose sequence (1972 definition, top to bottom)
| Unit | Rocks |
|---|---|
| Sedimentary cover | radiolarian chert, shale, minor limestone (pelagic) |
| Mafic volcanic complex | pillow basalts and sheet flows |
| Mafic sheeted dyke complex | dykes intruding dykes, with one-sided chilled margins |
| Gabbroic complex | isotropic gabbro above layered cumulate gabbro |
| Ultramafic cumulates | dunite, wehrlite, pyroxenite; podiform chromitite near the base of the crust (the petrological Moho) |
| Mantle tectonite | foliated harzburgite (± lherzolite), the depleted residue of melting |
Also commonly present: plagiogranite (sodic, felsic differentiates), and a metamorphic sole of amphibolite or granulite beneath the mantle section, formed at the start of thrusting and dating the beginning of emplacement.
Two Mohos: the petrological Moho lies at the base of the ultramafic cumulates (top of the mantle tectonite); the seismic Moho lies at the top of the cumulate ultramafics (where seismic velocity jumps from gabbro to peridotite values). In an ophiolite the two are therefore separated by the thickness of the ultramafic cumulates.
Mid-ocean ridge versus supra-subduction zone
| Feature | MOR-type | Supra-subduction-zone (SSZ) type |
|---|---|---|
| Lava chemistry | MORB-like; no Nb–Ta depletion | arc-like: Nb–Ta depletion, enriched large-ion lithophiles; boninites |
| Mantle | lherzolite to harzburgite | very depleted harzburgite; high Cr# spinel |
| Example abroad | some Alpine and Ligurian ophiolites | Troodos (Cyprus), Semail (Oman) |
Most well-preserved ophiolites are SSZ type: they formed above a nascent subduction zone, which made them easier to obduct.
Indian ophiolites
- Indus–Tsangpo Suture Zone, Ladakh: Nidar ophiolite (largely an intra-oceanic arc–ophiolite sequence) and Spontang ophiolite (a thrust klippe on the Indian margin).
- Indo-Myanmar ranges: Naga Hills and Manipur ophiolites.
- Andaman Islands: Andaman ophiolite in the outer-arc ridge of the Andaman subduction zone.
All represent Neo-Tethyan oceanic lithosphere, Mesozoic in age, emplaced as India approached and collided with Asia.
Granitoids
Granitoid covers quartz-rich plutonic rocks: granite, granodiorite, tonalite, trondhjemite and related types (named on the QAPF diagram).
Alphabet classification
| Type | Source | Key features |
|---|---|---|
| I-type (igneous source) | meta-igneous or mantle-derived source | metaluminous to weakly peraluminous (A/CNK below about 1.1); hornblende, titanite, magnetite; Na-rich; normative diopside; arc settings |
| S-type (sedimentary source) | partial melting of metasedimentary rocks | strongly peraluminous (A/CNK above about 1.1); muscovite, cordierite, garnet, tourmaline, ilmenite; normative corundum; high \( ^{87}\)Sr/\( ^{86}\)Sr; collisional settings |
| A-type (anorogenic, alkaline, anhydrous) | dry, hot melting; often residual crust or differentiated mantle melts | high Fe/Mg, high Ga/Al, Zr, Nb, Y, REE; often peralkaline (A/NK below 1: sodic amphibole and pyroxene); rifts and post-collisional settings |
| M-type (mantle) | fractionated mantle melts | plagiogranites in ophiolites and oceanic arcs |
Ishihara’s complementary magnetite series (oxidised, mostly I-type) and ilmenite series (reduced, mostly S-type) relate to oxygen fugacity and to ore associations (Cu–Mo porphyries with magnetite series; Sn–W with ilmenite series).
Alumina saturation index:
$$\boxed{\text{A/CNK} = \frac{\text{Al}_2\text{O}_3}{\text{CaO} + \text{Na}_2\text{O} + \text{K}_2\text{O}}\ (\text{molar})} \qquad \text{A/NK} = \frac{\text{Al}_2\text{O}_3}{\text{Na}_2\text{O} + \text{K}_2\text{O}}$$- A/CNK > 1: peraluminous; A/CNK < 1 and A/NK > 1: metaluminous; A/NK < 1: peralkaline.
Tectonic discrimination. Trace-element diagrams such as Pearce and co-workers’ Rb versus (Y + Nb) separate volcanic-arc, syn-collisional, within-plate and ocean-ridge granites. Use them as guides, not proof: source composition can mimic setting.
Archaean TTG. The tonalite–trondhjemite–granodiorite suite, sodic and with steep REE patterns and low heavy REE, made much of the Archaean continental crust. It is usually interpreted as partial melting of hydrated basalt (amphibolite or eclogite) with garnet left in the residue.
Indian granitoids
| Granitoid | Craton or belt | Type and notes |
|---|---|---|
| Peninsular Gneiss | Dharwar craton | Archaean TTG gneisses, polyphase |
| Closepet Granite | Dharwar craton | Neoarchaean (about 2.5 Ga), elongate north–south batholith; a classic example of crustal-scale magma transfer and mixing with mafic magma (enclaves, mixed zones) |
| Singhbhum Granite | Singhbhum craton | Palaeo- to Mesoarchaean, multiphase batholith |
| Bundelkhand Granite | Bundelkhand craton | Neoarchaean to Palaeoproterozoic, K-rich |
| Malani Igneous Suite | western Rajasthan | Neoproterozoic (about 750 Ma); one of the largest felsic igneous provinces in India; A-type granites (Jalore, Siwana; Siwana is peralkaline) with rhyolites |
| Ladakh (Trans-Himalayan) Batholith | Indus–Tsangpo Suture | I-type, subduction-related; Cretaceous to Palaeogene |
| Himalayan leucogranites | Higher Himalaya (Badrinath, Gangotri) | Miocene; S-type, muscovite–tourmaline; melting of metasediments during and after collision |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Archaean anorthosite: very calcic plagioclase, chromitite | Massif anorthosite: andesine–labradorite, AMCG, Fe–Ti ores | |
| Carbonatite: igneous, over 50% carbonate | Marble: metamorphosed sedimentary carbonate | |
| Charnockite: orthopyroxene granitoid | Enderbite: orthopyroxene tonalite | |
| Kimberlite: ultrabasic, olivine macrocrysts | Lamproite: ultrapotassic, phlogopite–richterite–leucite | |
| Petrological Moho: base of cumulates | Seismic Moho: velocity jump, top of cumulate ultramafics | |
| S-type: peraluminous, ilmenite series | I-type: metaluminous, magnetite series | |
| Red bole: weathered surface between flows | Intertrappean bed: sediment layer between flows | |
| Rajmahal Traps: Early Cretaceous, Kerguelen | Deccan Traps: about 66 Ma, Réunion |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is the minimum modal carbonate content of a carbonatite?
- Which mineral defines a charnockite?
- Name the Deccan formation that is least contaminated by continental crust.
Answers
- More than 50% primary carbonate.
- Orthopyroxene (in a granitoid).
- Ambenali Formation (Wai Subgroup).
Level 2: Part B Style
Practice Q1. Which association is characteristic of Proterozoic massif-type anorthosites?
(a) calcic bytownite–anorthite with chromitite layers (b) andesine–labradorite with mangerite, charnockite and rapakivi granite (c) olivine macrocrysts with pyrope and ilmenite (d) pillow basalts and sheeted dykes
Answer: (b)
Massif anorthosites belong to the AMCG suite. (a) describes Archaean anorthosites like Sittampundi; (c) kimberlite; (d) ophiolite.
Practice Q2. The order of units in an ophiolite, from top to bottom, is:
(a) pillow lava, sheeted dykes, gabbro, harzburgite (b) sheeted dykes, pillow lava, harzburgite, gabbro (c) gabbro, pillow lava, sheeted dykes, harzburgite (d) harzburgite, gabbro, sheeted dykes, pillow lava
Answer: (a)
Under the pelagic sediment come pillow lavas, sheeted dykes (feeders), gabbros (magma chamber) and mantle harzburgite. Option (d) is the same sequence upside down.
Practice Q3. A granite has (wt%) Al\(_2\)O\(_3\) 14.0, CaO 1.0, Na\(_2\)O 3.2, K\(_2\)O 5.0. Its A/CNK and type are closest to:
(a) 0.72, peralkaline (b) 0.95, metaluminous I-type (c) 1.12, peraluminous, S-type tendency (d) 1.31, metaluminous
Answer: (c)
Moles: Al\(_2\)O\(_3\) \( 14.0/101.96 = 0.1373 \); CaO \( 1.0/56.08 = 0.0178 \); Na\(_2\)O \( 3.2/61.98 = 0.0516 \); K\(_2\)O \( 5.0/94.20 = 0.0531 \). A/CNK \( = 0.1373/0.1225 = 1.12 \): peraluminous. Option (d) is A/NK (1.31), which is not used to define metaluminous.
Practice Q4. Diamond-bearing kimberlites are typically found on old cratons because:
(a) cratons have high heat flow that melts carbon (b) only thick, cold lithospheric keels extend into the diamond stability field (c) kimberlites form only by melting of Archaean crust (d) cratons are rich in limestone that converts to diamond
Answer: (b)
This is the reasoning behind Clifford’s rule. Cratons have low heat flow; kimberlites are mantle melts, not crustal melts.
Level 3: Part C Style
Practice Q5. A plume-derived Deccan basalt magma has Sr = 250 ppm and \( ^{87}\)Sr/\( ^{86}\)Sr = 0.7035. It assimilates upper crust with Sr = 150 ppm and \( ^{87}\)Sr/\( ^{86}\)Sr = 0.7200 (treat as simple bulk mixing). Which statements are correct?
- With 10% crust in the mixture, \( ^{87}\)Sr/\( ^{86}\)Sr is about 0.7045.
- To reach 0.7080 requires roughly 39% crust by mass.
- Simple mixing with this much crust would also strongly change major-element chemistry, so high ratios in real flows are better explained by AFC, which raises the isotope ratio with less bulk change.
- Fractional crystallisation of plagioclase alone could raise \( ^{87}\)Sr/\( ^{86}\)Sr to 0.7080.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- 1 true: Sr \( = 0.9\times 250 + 0.1\times 150 = 240 \) ppm; ratio \( = (225\times 0.7035 + 15\times 0.7200)/240 = 0.70453 \).
- 2 true: solving \( [(1 - f)250\times 0.7035 + f\times 150\times 0.7200]/[(1 - f)250 + 150f] = 0.7080 \) gives \( f \approx 0.39 \).
- 3 true: 39% bulk assimilation would shift SiO\(_2\) and other oxides far from basalt. In AFC, crystallisation supplies the heat for assimilation and the crust’s high-ratio Sr dominates the isotopic signal while the melt stays basaltic.
- 4 false: crystallisation does not fractionate Sr isotopes measurably.
Practice Q6. In a quarry in southern India, dark, coarse orthopyroxene-bearing patches cut across biotite–hornblende gneiss along a shear fracture. The patches contain CO\(_2\)-rich fluid inclusions; biotite is less abundant inside them. Which statements are correct?
- The patches are incipient (arrested) charnockites.
- Lowering of water activity, by CO\(_2\) infiltration or by removal of water into melt, drove biotite + quartz \( \to \) orthopyroxene + K-feldspar + H\(_2\)O.
- The patches must be younger than the gneissic foliation they cut.
- The patches prove that all charnockite massifs of the region are igneous.
(a) 1, 2 and 3 only (b) 2 and 4 only (c) 1 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
These features describe arrested charnockite formation (as at Kabbaldurga and Ponmudi). The reaction needs low \( a_{\text{H}_2\text{O}} \). Cross-cutting the foliation makes the patches younger. Statement 4 is false: these patches point to a metamorphic origin for this occurrence and say nothing about all charnockites.
Practice Q7. Taking a mean density of 3.3 g cm\(^{-3}\) for the overlying column and \( g = 9.81 \) m s\(^{-2}\), the minimum depth for diamond stability at 4.5 GPa, and the implication, are best stated as:
(a) about 14 km; diamonds can form in thickened crust (b) about 139 km; the lithosphere must be thicker than this for diamonds to be stored (c) about 1,390 km; diamonds come from the lower mantle only (d) about 46 km; diamonds form at the Moho
Answer: (b) about 139 km
\( h = P/(\rho g) = 4.5\times 10^{9}/(3300\times 9.81) = 1.39\times 10^{5} \) m \( \approx 139 \) km. Cold, thick cratonic keels reach this depth below the diamond–graphite boundary. Options (a) and (c) slip a factor of 10. (Some diamonds do come from much deeper, the “superdeep” ones, but that does not change the minimum depth.)
Quick Revision Table
| Suite | Must-know facts |
|---|---|
| Deccan | about 66 Ma, mostly chron 29r; tholeiitic; Réunion plume; Kalsubai–Lonavala–Wai; Bushe contaminated, Ambenali least; red boles, intertrappeans, Lameta below |
| Anorthosite | over 90% plagioclase; Archaean calcic (Sittampundi, chromitite); Proterozoic massif (AMCG; Chilka Lake, Bolangir) |
| Carbonatite | over 50% carbonate; sövite, alvikite, beforsite, natrocarbonatite; fenite; REE, Nb, P, F; Amba Dongar, Sung Valley, Sevathur, Newania |
| Charnockite | orthopyroxene granitoid; Holland 1893; St Thomas Mount; Bt + Qz \( \to \) Opx + Kfs + H\(_2\)O; incipient at Kabbaldurga, Ponmudi |
| Kimberlite | ultrabasic, CO\(_2\)–H\(_2\)O-rich; crater–diatreme–root; G10 pyrope, Cr-diopside, picroilmenite, chromite; Wajrakarur, Narayanpet, Majhgawan; Clifford’s rule |
| Ophiolite | Penrose: sediments, pillows, sheeted dykes, gabbro, cumulates, harzburgite; SSZ common; Nidar, Spontang, Naga Hills, Andaman |
| Granitoids | I, S, A, M; A/CNK; TTG; Closepet, Malani (A-type), Ladakh (I), Himalayan leucogranite (S) |
Key Takeaways
What’s Next
- Mineralogy and Petrology: Quick Revision: the whole chapter on one page.
- Go back to Magma Genesis, Phase Equilibria and Magma Mixing for the melting and mixing models used above.
- Meteorites, Earth’s Composition and Differentiation, for the compatible and incompatible element behaviour behind crust formation.
- Mineralogy and Petrology chapter overview.