Magma Genesis, Phase Equilibria and Magma Mixing
CSIR NET Earth Sciences Part C geology: mantle melting, binary and ternary phase diagrams, lever rule, batch and fractional melting, magma mixing evidence.
- 20 min
On this page · 17 sections
- Prerequisites
- The Hook: A Solid Mantle That Makes Liquid
- How Rocks Melt
- The Phase Rule and the Lever Rule
- Binary Systems
- Ternary Systems and the Basalt Tetrahedron
- Trace Elements: Melting and Crystallisation Models
- Differentiation Processes
- Magma Mixing
- Magma Types by Tectonic Setting
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Bowen’s reaction series and igneous textures at Part B level: Minerals and Rocks.
- The phase rule and Clapeyron equation: Phase Equilibria and the Phase Rule.
- Solid solutions and eutectic behaviour of minerals: Mineral Structures, Polymorphism and Solid Solution.
- Mantle structure and the depths of the crust and lithosphere: Seismology and Earth Structure.
The Hook: A Solid Mantle That Makes Liquid
How Rocks Melt
The mantle is solid because, along a normal geotherm, its temperature is below the solidus (the temperature of first melting). There are three ways to cross it.
| Mechanism | How the solidus is crossed | Setting | Typical magma |
|---|---|---|---|
| Decompression melting | rock rises nearly adiabatically; pressure drops; the dry solidus (positive \( dT/dP \)) is crossed | mid-ocean ridges, mantle plumes, continental rifts | MORB, ocean-island basalt, flood basalt |
| Flux (volatile-induced) melting | water released from the subducting slab lowers the solidus of the overlying mantle wedge | subduction zones | arc basalt and andesite (calc-alkaline) |
| Heat transfer | hot basalt intrudes or underplates the crust and raises its temperature | arcs, rifts, collisional orogens, hotspots under continents | granites, rhyolites (crustal melts) |
graph TD
A[Solid mantle below solidus] --> B{What changes?}
B -->|Pressure falls on upwelling| C[Decompression melting: ridges, plumes]
B -->|H2O added from slab| D[Flux melting: arcs]
B -->|Heat added by basalt| E[Crustal melting: granites]
C --> F[Basaltic melt segregates]
D --> F
F --> G[Ascent, storage, differentiation]
E --> G
G --> H[Fractional crystallisation, assimilation, mixing]Solidus, liquidus and volatiles
- The dry solidus has a positive slope. From the Clapeyron equation \( dT/dP = \Delta V_m/\Delta S_m \), melting expands the rock (\( \Delta V_m > 0 \)) and increases entropy (\( \Delta S_m > 0 \)), so higher pressure needs higher temperature to melt.
- Water dissolves in silicate melt (more at higher pressure) and stabilises it, lowering the solidus by hundreds of degrees. The water-saturated solidus of granite lies near 650–700 °C at mid-crustal pressures, far below the dry granite solidus. Water-saturated solidi have a negative slope at low pressure because water solubility in the melt rises with pressure.
- CO\(_2\) lowers the peridotite solidus at high pressure (where carbonate is stable) and yields small-degree, silica-poor, CO\(_2\)-rich melts: kimberlites, carbonatites, melilitites, nephelinites.
- The mantle adiabat is shallow (a fraction of a degree per kilometre in the solid). Because the solidus is much steeper, upwelling mantle crosses it at some depth and then melts progressively as it keeps rising. The hotter the mantle (higher potential temperature, as in plumes), the deeper melting starts and the more melt forms.
Degree of melting and magma type
- Mid-ocean ridge basalt reflects on the order of 10% melting of depleted peridotite.
- Small degrees of melting (a few per cent or less), especially at high pressure, give alkaline, silica-undersaturated melts enriched in incompatible elements.
- Larger degrees of melting at lower pressure give tholeiitic melts.
- Komatiites (Archaean, MgO above 18 wt%) need very high degrees of melting of hotter mantle.
Primary magma criteria
A primary magma is unmodified since leaving its source. Criteria for basalts in equilibrium with mantle peridotite: high Mg# (\( \text{Mg}/(\text{Mg} + \text{Fe}^{2+}) \), molar) of roughly 0.70 or more, high Ni (several hundred ppm) and Cr, and liquidus olivine of about Fo\(_{88-92}\), like mantle olivine. Most erupted basalts have lower Mg# and are evolved.
Olivine–melt equilibrium. The Fe–Mg exchange coefficient (Roeder and Emslie, 1970)
$$\boxed{K_D = \frac{(\text{Fe}/\text{Mg})_{\text{ol}}}{(\text{Fe}/\text{Mg})_{\text{liq}}} \approx 0.30}$$is nearly independent of temperature. Worked example: a melt with molar Mg# = 0.70 has \( (\text{Fe}/\text{Mg})_{\text{liq}} = 0.30/0.70 = 0.4286 \). Then \( (\text{Fe}/\text{Mg})_{\text{ol}} = 0.30\times 0.4286 = 0.1286 \), and olivine Fo \( = 1/(1 + 0.1286) = 88.6 \). So olivine is always more magnesian than the melt it grows from.
The Phase Rule and the Lever Rule
$$\boxed{F = C - P + 2}$$where \( F \) is the variance (degrees of freedom), \( C \) the number of components and \( P \) the number of phases. At fixed pressure (isobaric diagrams), \( F = C - P + 1 \).
- In a binary at fixed pressure, a eutectic point (two solids + liquid) has \( F = 2 - 3 + 1 = 0 \): invariant. Temperature stays fixed until one phase is used up.
- On a liquidus curve (one solid + liquid), \( F = 1 \): temperature and liquid composition change together.
Lever rule. In a two-phase field, the proportions of the two phases are inversely proportional to the distances from the bulk composition to each phase:
$$\boxed{\frac{\text{mass of phase } \alpha}{\text{total}} = \frac{|X_{\text{bulk}} - X_\beta|}{|X_\alpha - X_\beta|}}$$Binary Systems
Eutectic system: diopside–anorthite
The classic simple model of basalt crystallisation (1 atm): diopside melts at about 1,391 °C, anorthite at about 1,553 °C; the eutectic lies near Di\(_{58}\)An\(_{42}\) at about 1,274 °C. No solid solution between the end-members.
Crystallisation of bulk Di\(_{70}\)An\(_{30}\) (wt%):
- The liquid cools to the diopside liquidus; diopside crystallises first.
- As diopside separates, the liquid moves along the liquidus towards An-richer compositions.
- At the eutectic the liquid is An\(_{42}\). By the lever rule (diopside crystals are An\(_0\)): fraction of diopside \( = (42 - 30)/(42 - 0) = 0.286 \). So about 29% of the mass has crystallised as diopside and 71% is still liquid.
- At the eutectic, diopside and anorthite crystallise together at constant temperature (invariant) until the liquid is used up. The final rock is Di\(_{70}\)An\(_{30}\): crystallisation is closed-system.
Lessons: (i) the first mineral to crystallise depends on which side of the eutectic the bulk lies; (ii) the eutectic liquid is the same whatever the bulk; (iii) the first melt from any mixture of Di and An has the eutectic composition, and it stays at the eutectic until one phase is exhausted. Partial melting and crystallisation are mirror images.
Complete solid solution: albite–anorthite (plagioclase)
Albite melts at about 1,118 °C, anorthite at about 1,553 °C. A lens-shaped two-phase field lies between the liquidus (above) and solidus (below).
- Equilibrium crystallisation: the first plagioclase is much more calcic than the liquid. Crystals and liquid continuously re-equilibrate, both becoming more sodic; the last liquid disappears when the crystals reach the bulk composition.
- Fractional crystallisation: crystals do not re-equilibrate, so they become normally zoned (calcic cores, sodic rims), and the residual liquid can reach compositions much richer in albite than the bulk.
- Lever-rule example: suppose at some temperature the diagram gives liquid An\(_{40}\) and plagioclase An\(_{75}\). For bulk An\(_{60}\), the crystal fraction is \( (60 - 40)/(75 - 40) = 0.571 \).
The forsterite–fayalite system (Fo about 1,890 °C, Fa about 1,205 °C) behaves the same way: early olivine is Mg-rich.
Peritectic (incongruent melting): forsterite–silica
At 1 atm, enstatite (MgSiO\(_3\)) melts incongruently near 1,557 °C to forsterite plus a liquid richer in silica:
$$\text{MgSiO}_3 \;\to\; \text{Mg}_2\text{SiO}_4 + \text{liquid}$$On cooling, olivine that crystallised earlier reacts with the liquid at the peritectic to make orthopyroxene. If reaction is complete, olivine may vanish; if olivine is armoured or removed, the liquid continues to a silica-rich eutectic. This is the discontinuous branch of Bowen’s series in miniature and explains orthopyroxene reaction rims on olivine. With increasing pressure the incongruent behaviour disappears (enstatite melts congruently above a few kilobars).
Ternary Systems and the Basalt Tetrahedron
In ternary diagrams (fixed pressure) the liquidus is a surface contoured by isotherms, divided into primary phase fields by cotectic lines that meet at ternary eutectic or peritectic points.
Crystallisation path rules:
- The liquid first moves directly away from the composition of the first mineral to crystallise (along a straight line from that mineral through the bulk).
- On reaching a cotectic, it follows the cotectic downhill while two minerals crystallise.
- At a ternary eutectic, three solids crystallise at constant temperature until the liquid is used up.
In Di–An–Fo (a model of olivine basalt), a bulk composition in the forsterite field crystallises olivine first, then olivine + plagioclase or olivine + diopside along a cotectic, and finishes at the ternary point with all three.
Basalt tetrahedron (Yoder and Tilley, 1962)
The tetrahedron Fo–Di–Ne–Qz contains two important planes:
| Plane | Divides | Meaning |
|---|---|---|
| Di–Ab–En (plane of silica saturation) | quartz tholeiites (quartz-normative) from olivine tholeiites | |
| Di–Ab–Fo (critical plane of silica undersaturation) | olivine tholeiites (hypersthene-normative) from alkali basalts (nepheline-normative) | at low pressure a thermal divide: fractional crystallisation cannot turn an alkali basalt into a tholeiite or vice versa |
At high pressure the thermal divide breaks down, so the two series can originate from the same mantle at different pressures and degrees of melting. This is why alkali basalts are associated with small, deep melting.
The granite system
In Qz–Ab–Or with water, granitic melts crystallise near a ternary minimum (or eutectic). Most granites and rhyolites plot close to this minimum, which is strong evidence that they are low-temperature melts or residual liquids. Increasing water pressure moves the minimum towards the Ab corner and to lower temperature.
Trace Elements: Melting and Crystallisation Models
The partition coefficient \( D = C_\text{solid}/C_\text{liquid} \) (bulk \( D \) is the mode-weighted average for the mineral assemblage). \( D < 1 \): incompatible (K, Rb, Ba, Th, U, light REE, Nb, Zr). \( D > 1 \): compatible (Ni in olivine, Cr in spinel and clinopyroxene, Sr and Eu in plagioclase, heavy REE in garnet).
| Model | Equation | Behaviour |
|---|---|---|
| Batch (equilibrium) melting | \( \dfrac{C_L}{C_0} = \dfrac{1}{D + F(1 - D)} \) | maximum enrichment \( 1/D \) as \( F \to 0 \) |
| Fractional melting (instantaneous melt) | \( \dfrac{C_L}{C_0} = \dfrac{1}{D}(1 - F)^{1/D - 1} \) | very incompatible elements quickly exhausted from the source |
| Rayleigh fractional crystallisation | \( \dfrac{C_L}{C_0} = F^{(D - 1)} \) | \( F \) = fraction of liquid remaining |
| Equilibrium crystallisation | \( \dfrac{C_L}{C_0} = \dfrac{1}{D + F(1 - D)} \) | same form as batch melting |
\( F \) means melt fraction in melting models and liquid fraction remaining in crystallisation models: keep them straight.
Worked examples.
- Batch melting, \( D = 0.01 \), \( F = 0.05 \): \( C_L/C_0 = 1/(0.01 + 0.05\times 0.99) = 16.8 \).
- Rayleigh crystallisation of an incompatible element, \( D = 0.1 \), half the liquid remaining (\( F = 0.5 \)): \( C_L/C_0 = 0.5^{-0.9} = 1.87 \).
- Compatible Ni, \( D = 10 \), \( F = 0.8 \): \( C_L/C_0 = 0.8^{9} = 0.134 \). Removing just 20% olivine cuts Ni in the melt by over 85%, which is why Ni is such a sensitive monitor of olivine fractionation.
Ratio of two incompatible elements. With very small \( D \), batch melting barely fractionates their ratio, so ratios such as Nb/U or Ce/Pb in basalts reflect the source. Ratios of elements with different \( D \) (La/Yb) record degree of melting and residual garnet.
Differentiation Processes
| Process | Signature |
|---|---|
| Fractional crystallisation | curved or kinked trends on variation diagrams; compatible elements drop steeply; Eu anomaly if plagioclase fractionates |
| Assimilation (often with fractional crystallisation, AFC) | rising \( ^{87}\)Sr/\( ^{86}\)Sr and falling \( \varepsilon_{\text{Nd}} \) with SiO\(_2\); crustal xenoliths and xenocrysts |
| Liquid immiscibility | two coexisting melts: silicate–sulphide, silicate–carbonate (carbonatites), Fe-rich and Si-rich melts in tholeiites |
| Magma mixing | linear arrays, disequilibrium crystals, enclaves (below) |
Tholeiitic versus calc-alkaline trends. On an AFM diagram (alkalis–FeO\(_\text{T}\)–MgO), tholeiitic magmas show strong Fe enrichment at intermediate stages (classically the Skaergaard intrusion), because Fe–Ti oxides crystallise late. Calc-alkaline arc magmas show no Fe enrichment, because higher water content and oxygen fugacity bring magnetite onto the liquidus early.
Magma Mixing
Mixing (hybridisation) produces a homogeneous intermediate magma; mingling leaves the two magmas physically distinct, as blobs and streaks. Which happens depends on contrasts of temperature, viscosity and crystallinity: a small batch of hot basalt in a large, cooler, viscous granitic magma chills and stays as enclaves (mingling); similar-viscosity magmas of comparable volume mix.
Evidence
| Scale | Evidence |
|---|---|
| Field | mafic microgranular enclaves in granitoids, with chilled, crenulate margins; synplutonic dykes broken into pillows; banded (streaky) pumice and lavas |
| Crystal | disequilibrium assemblages (Mg-rich olivine with quartz); reverse zoning (rims more calcic or more magnesian than cores); sieve-textured or dusty plagioclase zones (partial dissolution in hotter melt); resorbed and embayed quartz with pyroxene or amphibole coronas (ocelli); acicular apatite in enclaves (quench growth) |
| Chemical | straight lines on element–element diagrams joining two end-members; correlated isotopic and elemental variation; mixed populations of crystal compositions |
Mixing arithmetic
For mass fraction \( f \) of magma A,
$$\boxed{C_{\text{mix}} = f\,C_A + (1 - f)\,C_B}$$so all elements plot on straight lines on any element–element diagram. Ratios (and isotope ratios) mix along hyperbolae unless the two ratios share a common denominator. For isotope ratios the mixture is weighted by the element concentration:
$$R_{\text{mix}} = \frac{f\,C_A R_A + (1 - f)\,C_B R_B}{f\,C_A + (1 - f)\,C_B}$$Why it matters. Injection of hot mafic magma into a cooler, crystal-rich reservoir adds heat and volatiles, can remobilise a crystal mush, and is recognised as a common trigger of explosive eruptions. Mixing also produces many intermediate (andesitic and dacitic) magmas in arcs.
Magma Types by Tectonic Setting
| Setting | Melting mechanism | Characteristic magmas | Chemical signature |
|---|---|---|---|
| Mid-ocean ridge | decompression of depleted mantle | MORB (olivine tholeiite) | low K, depleted in incompatible elements, flat to light-REE-depleted |
| Ocean island / plume | decompression of hotter, enriched mantle | alkali basalt, tholeiite | enriched incompatible elements, high Nb |
| Continental flood basalt | plume head plus lithosphere | tholeiite | variable crustal contamination |
| Subduction zone | flux melting of the wedge | basalt–andesite–dacite (calc-alkaline), boninite | enriched large-ion lithophile elements; Nb–Ta–Ti depletion; high water |
| Continental collision | crustal melting | peraluminous (S-type) leucogranite | high \( ^{87}\)Sr/\( ^{86}\)Sr; muscovite, tourmaline |
| Continental rift | decompression, small degree | alkaline basalts, phonolites, carbonatites, nephelinites | silica-undersaturated, CO\(_2\)-rich |
| Craton interior (deep) | very small degree, CO\(_2\)–H\(_2\)O-rich | kimberlite, lamproite | ultrabasic, potassic, diamond-bearing |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Eutectic: two solids + liquid; congruent melting of each solid | Peritectic: solid reacts with liquid to form a new solid (enstatite) | |
| Liquidus: above it, all liquid | Solidus: below it, all solid | |
| Cotectic: two minerals crystallise together from the liquid | Reaction curve: one mineral is resorbed as another grows | |
| Batch melting: melt stays with residue until extracted | Fractional melting: each melt increment removed at once | |
| \( F \) in melting = melt fraction | \( F \) in Rayleigh crystallisation = liquid remaining | |
| Mixing: homogenised hybrid | Mingling: physically separate magmas (enclaves) | |
| Normal zoning: calcic core, sodic rim | Reverse zoning: sodic core, calcic rim (often recharge) | |
| Primary magma: unmodified mantle melt | Parental magma: the least-evolved magma of a suite (may itself be evolved) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is the variance at the eutectic point of a binary system at fixed pressure?
- Name the process by which mantle beneath a mid-ocean ridge melts.
- Write the Rayleigh fractional crystallisation equation.
Answers
- Zero (\( F = 2 - 3 + 1 = 0 \)); it is invariant.
- Adiabatic decompression melting.
- \( C_L/C_0 = F^{(D - 1)} \), with \( F \) the fraction of liquid remaining.
Level 2: Part B Style
Practice Q1. A liquid of bulk composition Di\(_{70}\)An\(_{30}\) (wt%) cools in the Di–An system, whose eutectic is at An\(_{42}\). When the liquid first reaches the eutectic, the fraction of the system that has crystallised is closest to:
(a) 12% (b) 29% (c) 42% (d) 71%
Answer: (b) about 29%
Only diopside (An\(_0\)) has crystallised. Lever rule: crystals \( = (42 - 30)/(42 - 0) = 0.286 \). Option (d) is the liquid fraction; option (a) is the numerator without dividing.
Practice Q2. A basaltic melt has molar Mg# = 0.70. Taking \( K_D^{\text{Fe–Mg}} = 0.30 \), the olivine in equilibrium with it is closest to:
(a) Fo\(_{70}\) (b) Fo\(_{79}\) (c) Fo\(_{89}\) (d) Fo\(_{95}\)
Answer: (c) Fo89
\( (\text{Fe/Mg})_\text{liq} = 0.30/0.70 = 0.429 \); \( (\text{Fe/Mg})_\text{ol} = 0.30\times 0.429 = 0.129 \); Fo \( = 1/1.129 = 0.886 \). Option (a) wrongly equates olivine Fo with melt Mg#.
Practice Q3. An element with bulk \( D = 0.01 \) in a source that undergoes 5% batch melting is enriched in the melt by a factor of about:
(a) 5 (b) 17 (c) 20 (d) 100
Answer: (b) about 17
\( 1/(0.01 + 0.05\times 0.99) = 1/0.0595 = 16.8 \). Option (c) is \( 1/F \), the limit for a perfectly incompatible element (\( D = 0 \)); (d) is \( 1/D \), the limit as \( F \to 0 \).
Practice Q4. Olivine phenocrysts in a basalt are rimmed by orthopyroxene. This texture is best explained by:
(a) magma mixing with a granitic melt (b) a peritectic reaction of olivine with a silica-richer liquid (c) exsolution of orthopyroxene from olivine (d) eutectic co-crystallisation of olivine and orthopyroxene
Answer: (b)
In the Fo–SiO\(_2\) system, olivine reacts with liquid at the peritectic to form enstatite, giving reaction rims. Mixing can produce similar coronas but needs other evidence; olivine cannot exsolve pyroxene; a eutectic would produce separate grains, not rims.
Level 3: Part C Style
Practice Q5. A suite of volcanic rocks shows the following (wt% and ppm):
| Sample | SiO\(_2\) | MgO | Rb | \( ^{87}\)Sr/\( ^{86}\)Sr |
|---|---|---|---|---|
| Basalt end-member A | 50.0 | 8.0 | 10 | 0.7035 |
| Rhyolite end-member B | 70.0 | 0.5 | 150 | 0.7100 |
| Andesite X | 56.0 | 5.75 | 52 | ? |
Which statements are correct?
- On SiO\(_2\), X is a mixture of 70% A and 30% B.
- MgO and Rb of X are consistent with the same mixing proportion.
- Rb behaves as if \( D \approx 0 \) for this process, so these data alone exclude fractional crystallisation.
- If Sr in A is 400 ppm and in B is 100 ppm, X should have \( ^{87}\)Sr/\( ^{86}\)Sr of about 0.7041.
(a) 1 and 2 only (b) 1, 2 and 4 only (c) 1, 2 and 3 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 4 only
- 1 true: \( f_A = (70 - 56)/(70 - 50) = 0.70 \).
- 2 true: MgO \( = 0.7\times 8.0 + 0.3\times 0.5 = 5.75 \); Rb \( = 0.7\times 10 + 0.3\times 150 = 52 \). All fit one line.
- 3 false: consistency with mixing does not exclude fractionation; the decisive test is the isotope ratio, which fractional crystallisation cannot change.
- 4 true: Sr in X \( = 0.7\times 400 + 0.3\times 100 = 310 \) ppm. \( R = (0.7\times 400\times 0.7035 + 0.3\times 100\times 0.7100)/310 = (196.98 + 21.30)/310 = 0.70413 \). If X were produced from A by crystallisation alone, it would keep 0.7035.
Practice Q6. In a fractionating basalt, olivine with \( D_\text{Ni} = 10 \) and an incompatible element Zr with \( D = 0.05 \) are tracked. After 20% of the magma has crystallised (Rayleigh), which statements are correct?
- Ni in the residual liquid is about 13% of its initial value.
- Zr in the residual liquid is about 1.24 times its initial value.
- Zr/Ni in the liquid has risen by a factor of about 9.
- The Mg# of the liquid has risen.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
\( F = 0.8 \).
- 1 true: \( 0.8^{9} = 0.134 \).
- 2 true: \( 0.8^{-0.95} = 1.236 \).
- 3 true: \( 1.236/0.134 = 9.2 \).
- 4 false: olivine removes Mg preferentially (\( K_D = 0.3 \)), so the liquid’s Mg# falls.
Practice Q7. A dry peridotite has a melting entropy \( \Delta S_m = 60 \) J mol\(^{-1}\) K\(^{-1}\) and a melting volume change \( \Delta V_m = 5.0 \) cm\(^3\) mol\(^{-1}\) (illustrative values). The slope of its solidus is closest to:
(a) 8 K GPa\(^{-1}\) (b) 83 K GPa\(^{-1}\) (c) 830 K GPa\(^{-1}\) (d) 12 GPa K\(^{-1}\)
Answer: (b) about 83 K/GPa
\( dT/dP = \Delta V/\Delta S = 5.0\times 10^{-6}\ \text{m}^3\text{ mol}^{-1} / 60\ \text{J mol}^{-1}\text{K}^{-1} = 8.33\times 10^{-8} \) K Pa\(^{-1}\) \( = 83 \) K GPa\(^{-1}\). The other options mishandle the cm\(^3\) to m\(^3\) conversion (\( 10^{-6} \)) or invert the ratio. A positive slope means decompression of hot mantle eventually crosses the solidus.
Quick Revision Table
| Idea | Fact |
|---|---|
| Ways to melt | decompression (ridge, plume), flux (arc), heat (crustal melting) |
| Clapeyron | \( dT/dP = \Delta V/\Delta S \); dry solidus positive slope |
| Water | lowers solidus by hundreds of degrees |
| Phase rule | \( F = C - P + 2 \) (isobaric: \( +1 \)) |
| Di–An | eutectic about 1,274 °C, Di\(_{58}\)An\(_{42}\) (1 atm) |
| Ab–An | Ab 1,118 °C, An 1,553 °C; solid-solution loop |
| Fo–Fa | 1,890 / 1,205 °C |
| Enstatite | incongruent at 1 atm (about 1,557 °C): En \( \to \) Fo + liquid |
| Basalt tetrahedron | Di–Ab–Fo plane: thermal divide (alkali vs tholeiitic) at low P |
| \( K_D \) ol–liq | 0.30 |
| Batch | \( C_L/C_0 = 1/[D + F(1-D)] \) |
| Rayleigh | \( C_L/C_0 = F^{D-1} \) |
| Mixing | \( C = fC_A + (1-f)C_B \); isotopes weighted by concentration |
| Mixing evidence | enclaves, reverse zoning, sieve plagioclase, disequilibrium pairs |
Key Takeaways
What’s Next
- Metamorphic Textures, Facies, Reactions and P–T–t Paths: the same thermodynamics applied to solid-state reactions.
- Indian Rock Suites: Deccan basalts, carbonatites, kimberlites and granitoids as case studies of these processes.
- Geological Time Scale and Radiometric Dating, for the Sr and Nd isotope systems used in mixing tests.
- Mineralogy and Petrology: Quick Revision.