Coastal Processes, Littoral Currents, Beach Stability, Tsunami and Estuaries
CSIR NET Ocean Sciences: wave shoaling, refraction, longshore currents, littoral drift, beach profiles, tsunami physics, estuarine circulation and mixing.
- 23 min
On this page · 15 sections
Prerequisites
- Wind Waves, Wave Spectra, Forecasting, Tides and Tidal Currents: dispersion, group velocity, wave energy and tidal currents.
- T-S Diagrams, Mixing and Water Masses: the lever rule and conservative mixing, reused for estuaries.
- Weathering, Erosion, Transport and Deposition: sediment grain size and settling.
- Natural Hazards: tsunamis and storm surges as hazards.
The Hook: A Harbour That Moved a Beach
Waves Approaching the Coast
Shoaling
As a wave moves into shallower water its period stays fixed, its speed and wavelength fall, and (with no energy loss) the energy flux \( Ec_g \) per unit crest length is conserved. The height changes by the shoaling coefficient:
$$\boxed{K_s = \frac{H}{H_0} = \sqrt{\frac{c_{g0}}{c_g}}}$$Because \( c_g \) first rises slightly in intermediate depth, \( K_s \) dips just below 1 before increasing sharply in shallow water.
Refraction
The part of a crest in shallower water travels more slowly, so crests turn to become more nearly parallel to the depth contours. Over straight, parallel contours this obeys Snell’s law:
$$\boxed{\frac{\sin\theta}{c} = \text{constant}}$$where \( \theta \) is the angle between the crest and the contours. The spreading or crowding of wave rays changes the height by the refraction coefficient \( K_r = \sqrt{b_0/b} \) (\( b \) = spacing of rays), which for parallel contours is \( \sqrt{\cos\theta_0/\cos\theta} \).
- Headlands: rays converge, energy is concentrated, erosion is strong.
- Bays: rays diverge, energy is spread, deposition and pocket beaches.
- Over a submarine ridge or canyon, focusing or defocusing can make large differences in nearshore wave height.
Diffraction and reflection
- Diffraction: energy spreads sideways into the shadow behind a breakwater or headland; important in harbour design.
- Reflection: steep structures (seawalls, cliffs) reflect much of the incoming energy, forming partial standing waves that scour the toe of the structure. Gently sloping beaches reflect little.
Breaking and the surf zone
Waves break when \( H_b \approx 0.78\,h_b \) (depth-limited breaking). The type of breaker depends on beach slope \( \tan\beta \) and deep-water steepness, combined in the Iribarren number (surf similarity parameter):
$$\xi = \frac{\tan\beta}{\sqrt{H_0/L_0}}$$| Breaker | \( \xi \) | Beach and wave | Character |
|---|---|---|---|
| Spilling | small (below about 0.5) | gentle slope, steep waves | foam spills down the face over a wide surf zone |
| Plunging | intermediate (about 0.5–3.3) | moderate slope | crest curls over and plunges; strong turbulence |
| Collapsing / surging | large (above about 3.3) | steep beach, long low swell | wave surges up the beach with little breaking; much reflection |
Nearshore Currents
Radiation stress and set-up
Waves carry momentum. The excess momentum flux they carry is the radiation stress (Longuet-Higgins and Stewart). Its gradients drive nearshore water motion:
- Seaward of the breakers the mean water level drops slightly (set-down); inside the surf zone, as waves lose height, it rises toward the shore (set-up), which adds to storm surges.
Longshore currents
Waves breaking at an angle push water along the shore within the surf zone. The longshore current is strongest when the breaking angle \( \alpha_b \) is moderate. A widely used empirical form (Komar) is
$$V = 1.17\sqrt{gH_b}\,\sin\alpha_b\cos\alpha_b$$For \( H_b = 1.5 \) m and \( \alpha_b = 10° \), \( V \approx 0.77 \) m s\(^{-1}\). The current is confined to the surf zone and peaks around its middle.
Rip currents and cell circulation
Where wave height varies along the beach (because of refraction, bars or edge waves), set-up varies too, and water flows alongshore from high set-up to low set-up regions, then turns seaward in narrow, fast rip currents:
graph LR
A[Shoreward mass transport by breaking waves] --> B[Feeder currents along the beach]
B --> C[Rip neck: narrow seaward jet through the surf zone]
C --> D[Rip head: spreads beyond the breakers]
D --> ARips cut channels through bars, are visible as gaps in the breaker line with darker, sediment-laden water, and are a major cause of drowning on Indian beaches. Swim parallel to the shore to escape one.
Littoral Drift and Beach Stability
Littoral (longshore) sediment transport
Breaking waves suspend sand and the longshore current carries it. Swash also moves sand in a zig-zag along the beach (beach drift): up the beach obliquely with the incoming wave, straight down under gravity. Together they form littoral drift.
The CERC formula relates the volume transport rate to breaking-wave conditions:
$$Q \propto H_b^{5/2}\sin 2\alpha_b$$- Transport is largest at \( \alpha_b \approx 45° \) and zero for normal incidence.
- It rises steeply with wave height: doubling \( H_b \) increases \( Q \) by \( 2^{2.5} \approx 5.7 \).
- Net drift is the difference between drift in opposite directions over a year; gross drift is their sum.
Along much of the Indian east coast the net drift is northward, driven by waves from the south during the long southwest monsoon season, with a shorter southward reversal during the northeast monsoon. Harbours and breakwaters on this coast therefore accrete on the south (updrift) side and erode on the north (downdrift) side.
Coastal structures and their effects
| Structure | Purpose | Effect on littoral drift |
|---|---|---|
| Groyne (perpendicular to the shore) | trap sand | accretion updrift, erosion downdrift; a groyne field gives a saw-tooth shoreline |
| Jetty / breakwater at an inlet | keep a channel open | traps sand updrift; downdrift erosion; channel bypassing may be needed |
| Offshore (detached) breakwater | reduce wave energy behind it | sand accumulates in its shadow as a salient, or a tombolo if it joins the structure |
| Seawall / revetment | protect land behind | reflects waves, scours the beach in front; beach may be lost |
| Beach nourishment | add sand | “soft” option; needs repeating |
| Sand bypassing | pump sand across an inlet | restores the natural drift |
Beach profiles and seasonal cycles
A beach profile has, from land to sea: dunes, backshore with one or more berms, foreshore (swash zone), and nearshore with longshore bars and troughs.
| Calm-season (swell) profile | Storm-season profile | |
|---|---|---|
| Waves | low, long-period, low steepness | high, short-period, steep |
| Net sand movement | onshore | offshore |
| Berm | wide, built up | cut back or removed |
| Bar | small or welded to the beach | large offshore bar |
| Indian coasts | post-monsoon recovery | southwest monsoon erosion (west coast), cyclones (east coast) |
Many Indian beaches lose sand to offshore bars during the monsoon and rebuild in the following fair-weather months. A beach that recovers fully each year is in dynamic equilibrium, even though it changes greatly through the year.
Beach states and stability
The dimensionless fall velocity (Dean’s parameter) compares wave height and period with how fast the sand settles:
$$\Omega = \frac{H_b}{w_s T}$$| \( \Omega \) | Beach state | Character |
|---|---|---|
| below about 1 | reflective | steep, coarse sand, narrow surf zone, surging breakers, berms and cusps |
| about 1–6 | intermediate | bars and rips, most variable |
| above about 6 | dissipative | flat, fine sand, wide surf zone with spilling breakers |
Other rules a candidate should know:
- Grain size and slope: coarser sediment gives steeper beaches (shingle beaches are steep; fine-sand beaches flat), because coarse sediment drains swash quickly and the backwash is weak.
- Equilibrium profile (Bruun, Dean): \( h = Ay^{2/3} \), where \( y \) is distance offshore and \( A \) depends on grain size (larger for coarser sand).
- Depth of closure: the depth beyond which the profile changes little over years; sand moving across it is lost to the beach.
- Sediment budget: a beach is stable when supply (rivers, cliff erosion, drift from updrift, onshore transport) balances losses (drift downdrift, offshore transport, wind-blown sand, mining). Dams on rivers, sand mining and harbours cut supply; the beach responds by eroding.
Sea-level rise: the Bruun rule
If sea level rises by \( S \), the equilibrium profile moves up and landward, eroding the upper beach and depositing offshore. The shoreline retreats by
$$\boxed{R = \frac{S\,L_*}{B + h_*}}$$where \( L_* \) is the cross-shore width of the active profile to the depth of closure \( h_* \), and \( B \) the berm height. Typical ratios give a retreat of tens to a hundred times the sea-level rise. For \( S = 0.5 \) m, \( L_* = 600 \) m, \( B + h_* = 10 \) m: \( R = 30 \) m.
Storm Surges
A storm surge is the rise of sea level above the predicted tide caused by a storm. Two parts:
- Inverse barometer effect: about 1 cm rise for each 1 hPa fall in pressure. A 50 hPa drop gives about 0.5 m.
- Wind set-up (usually larger in shallow water): onshore wind stress balanced by a sea-surface slope, \( \partial\eta/\partial x = \tau/(\rho g h) \), so set-up grows with fetch over the shelf and is inversely proportional to depth. A stress of 2 N m\(^{-2}\) over a 100 km wide, 20 m deep shelf gives about 1 m.
The head of the Bay of Bengal is highly surge-prone: a wide, shallow shelf, a funnelling coastline, large tides on which the surge can ride, and frequent intense cyclones. Wave set-up adds to the total water level at the shore.
Tsunami
Generation
A tsunami is a train of long gravity waves generated by sudden displacement of a large volume of water:
| Source | Mechanism |
|---|---|
| Submarine earthquakes (the commonest) | vertical displacement of the sea floor in shallow, large-magnitude thrust events at subduction zones |
| Submarine and coastal landslides | can produce very high local waves |
| Volcanic eruptions | caldera collapse, pyroclastic flows into the sea, explosions |
| Meteorite impacts | rare |
| Atmospheric pressure jumps (meteotsunami) | resonance of a moving pressure disturbance with long waves |
Strike-slip earthquakes, which move the floor sideways, are much less effective.
Propagation: always a shallow-water wave
Tsunami wavelengths are about 100–500 km and periods roughly 10 minutes to an hour, so even the deep ocean is “shallow” (\( h \ll L/20 \)):
$$\boxed{c = \sqrt{gh}}$$| Depth | Speed |
|---|---|
| 4000 m | 198 m s\(^{-1}\) (713 km h\(^{-1}\)) |
| 1000 m | 99 m s\(^{-1}\) |
| 50 m | 22 m s\(^{-1}\) |
| 10 m | 9.9 m s\(^{-1}\) |
The wave is non-dispersive to first order, so it keeps its shape across an ocean. Travel-time maps are drawn by integrating \( ds/\sqrt{gh} \) over the bathymetry.
Shoaling: Green’s law
In the open ocean the amplitude is usually under a metre and ships do not notice it. Approaching the coast, the speed falls and, conserving energy flux, the amplitude grows. For slowly varying depth and channel width \( b \):
$$\boxed{\frac{A_2}{A_1} = \left(\frac{h_1}{h_2}\right)^{1/4}\left(\frac{b_1}{b_2}\right)^{1/2}}$$A 0.5 m tsunami in 4000 m of water grows to about 2.2 m at 10 m depth by shoaling alone; refraction, funnelling into bays and resonance can multiply this further. The final height reached on land is the run-up; the inland distance flooded is the inundation.
What a tsunami looks like at the coast
- Not a breaking wind wave but a rapid rise of sea level, like a fast tide, with strong currents, often as a turbulent bore.
- Several waves, minutes to an hour apart; the first is often not the largest.
- If the trough arrives first (a leading depression), the sea withdraws unusually far: a natural warning sign.
- Harbour and bay resonance can produce prolonged oscillations for hours.
| Wind wave | Tsunami | Tide | |
|---|---|---|---|
| Period | about 1–30 s | about 10 min to 1 h | about 12–25 h |
| Wavelength | up to a few hundred m | 100–500 km | thousands of km |
| Deep-ocean regime | deep-water | shallow-water | shallow-water |
| Speed in 4000 m | \( gT/2\pi \) (about 15 m s\(^{-1}\) for 10 s) | about 200 m s\(^{-1}\) | about 200 m s\(^{-1}\) as a free wave |
| Motion | mainly surface layer | whole water column | whole water column |
Warning systems
Detection combines seismic networks (location and magnitude within minutes), deep-ocean bottom-pressure recorders relaying through surface buoys (DART-type), and coastal tide gauges. Travel-time and inundation models then give warnings. After 2004, India set up the Indian Tsunami Early Warning Centre at INCOIS, Hyderabad, which also serves as a regional tsunami service provider for the Indian Ocean.
Seiches
A seiche is a standing oscillation of an enclosed or semi-enclosed basin, set off by wind, pressure changes, tsunamis or long swell. Merian’s formula gives the natural periods:
$$T_n = \frac{2L}{n\sqrt{gh}}\ \text{(closed basin)}, \qquad T = \frac{4L}{\sqrt{gh}}\ \text{(fundamental, open at one end)}$$A harbour 800 m long and 10 m deep, open at one end, has a fundamental period of about 5.4 minutes; long-period waves near this period can cause dangerous ship motions.
Estuaries
Definition and types
An estuary is a semi-enclosed coastal body of water with a free connection to the open sea, within which sea water is measurably diluted by fresh water from land drainage (Pritchard’s definition).
By origin (geomorphology):
| Type | Origin | Example settings |
|---|---|---|
| Drowned river valley (coastal plain) | post-glacial sea-level rise flooded river valleys | the commonest type worldwide |
| Fjord | glacially deepened valleys with a shallow sill | Norway, Chile, British Columbia |
| Bar-built (lagoonal) | sand bars or spits partly enclose a shallow lagoon | Pulicat, Chilika and many Indian east-coast lagoons; Kerala backwaters |
| Tectonic | faulting or subsidence | various |
By circulation and stratification, which depends on the competition between river flow (which stratifies) and tidal mixing (which mixes):
| Type | River vs tide | Salinity structure | Circulation |
|---|---|---|---|
| Salt-wedge (highly stratified) | river dominant, small tides | sharp halocline; a wedge of sea water along the bottom, fresh water on top | entrainment of salt water upward into the outflowing fresh layer |
| Partially mixed | comparable | gradual increase of salinity with depth and seaward | strong two-layer gravitational (estuarine) circulation: seaward on top, landward at depth |
| Well-mixed (vertically homogeneous) | tide dominant, large range, wide shallow | salinity uniform with depth, increasing seaward; lateral variations possible | tidal dispersion; weak residual flow |
| Fjord | sill limits exchange | strongly stratified; deep basin water can stagnate and go anoxic | surface outflow over the sill; intermittent deep renewal |
| Inverse (negative) | evaporation exceeds river input | salinity increases landward | surface inflow, dense outflow at depth |
The same estuary can change type with season. The monsoonal estuaries of the Indian west coast (for example Mandovi and Zuari in Goa) behave as salt-wedge or highly stratified systems during the southwest monsoon, when river discharge is enormous, and as well-mixed systems in the dry season.
The Hansen–Rattray diagram classifies estuaries quantitatively by a stratification parameter (top-to-bottom salinity difference divided by mean salinity) and a circulation parameter (surface residual velocity divided by the river-flow velocity).
Gravitational circulation and the Knudsen relations
In a partially mixed estuary, fresh water flows seaward at the surface and gains salt by mixing; sea water flows landward at depth to supply that salt. For steady state, conserving water and salt (Knudsen):
$$Q_{out} - Q_{in} = R, \qquad Q_{out}S_{out} = Q_{in}S_{in}$$$$\boxed{Q_{in} = \frac{R\,S_{out}}{S_{in} - S_{out}}, \qquad Q_{out} = \frac{R\,S_{in}}{S_{in} - S_{out}}}$$where \( R \) is river discharge, and \( S_{in} \), \( S_{out} \) the salinities of the inflowing and outflowing layers at the mouth.
Mixing
| Process | Role |
|---|---|
| Entrainment | one-way upward mixing of salt water into a fast-moving fresh layer (salt-wedge estuaries) |
| Turbulent diffusion | two-way mixing by tidal and wind turbulence; strongest when \( Ri \) is small |
| Tidal pumping and trapping | correlations between tidal currents and salinity give net salt flux even without mean flow |
| Shear dispersion | lateral and vertical velocity shear spread properties along the estuary |
Flushing time
How long water (and anything dissolved in it) stays in an estuary:
- Fresh-water fraction method: \( T_f = V_f/R \), where \( V_f = \int(1 - S/S_0)\,dV \) is the volume of fresh water in the estuary and \( S_0 \) the sea salinity.
- Tidal prism method: \( T_f = \frac{V + P}{P} \) tidal cycles, where \( V \) is the low-water volume and \( P \) the tidal prism (the volume between low and high water). It assumes complete mixing each cycle and so underestimates the true flushing time.
Sedimentation
- Sources: river sediment from upstream; marine sediment carried in by the landward bottom flow and by flood-dominant tides.
- Flocculation: clay particles carrying surface charges stick together when they meet salt water, mainly in the low-salinity zone, forming flocs that settle faster.
- Estuarine turbidity maximum (ETM): near the landward limit of salt intrusion, the seaward-flowing river water and the landward bottom flow converge (the null point of residual bottom flow). Suspended sediment is trapped and concentrations far exceed those in the river or the sea. Tidal resuspension keeps it going.
- Settling lag and scour lag: fine sediment carried landward on the flood settles late and needs a stronger current to be eroded again, so it moves landward step by step and accumulates on tidal flats.
- Flood dominance imports sediment; ebb dominance exports it.
- Over time estuaries fill with sediment: tidal flats, salt marshes and mangroves build up; with high sediment supply the river builds a delta instead of maintaining an estuary.
Pollution
Estuaries receive sewage, industrial effluent, agricultural nutrients and urban runoff, and are often ports. Their physics makes them vulnerable:
| Issue | Physical reason |
|---|---|
| Accumulation of pollutants | long flushing times; landward bottom flow returns material that sinks |
| Hypoxia | stratification isolates bottom water; decay of organic matter (sewage, algal blooms) uses up oxygen; worst in salt-wedge and fjord-type estuaries |
| Eutrophication | nutrient loading, warm, shallow, sunlit water |
| Trace metals and organics | adsorb onto particles, flocculate and accumulate in the ETM and bottom sediment; can be released again under changing redox or salinity |
| Pathogens | sewage outfalls near beaches, shellfish beds |
| Oil and port activity | spills, dredging (resuspends contaminated sediment), ballast water (invasive species) |
Property–salinity mixing diagrams
Salinity is conservative. Plot any dissolved property against salinity across an estuary:
graph TD
A[Plot property against salinity from river end-member to sea end-member] --> B{Shape?}
B -->|Straight line| C[Conservative mixing: property behaves like salt]
B -->|Points below the line| D[Removal within the estuary: uptake, flocculation, adsorption]
B -->|Points above the line| E[Addition: desorption from particles, remineralisation, pollution input]This is the same lever-rule logic as two-type mixing on a T–S diagram. Extrapolating the straight high-salinity part back to zero salinity gives the effective river concentration, the amount that actually reaches the sea.
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| Longshore current: water flow in the surf zone | Littoral drift: sediment transport by waves and currents | |
| Rip current: seaward, narrow, through the breakers | Undertow: broad seaward return flow near the bed | |
| Net drift: difference | Gross drift: sum of both directions | |
| Reflective beach: steep, coarse | Dissipative beach: flat, fine | |
| Tsunami: shallow-water wave even in the deep ocean | Wind wave: deep-water wave offshore | |
| Storm surge: meteorological | Tsunami: geological (mostly) | |
| Salt-wedge: river dominant | Well-mixed: tide dominant | |
| Positive estuary: river exceeds evaporation | Inverse estuary: evaporation exceeds river | |
| ETM: sediment trapping at the null point | Flocculation: particle aggregation in low-salinity water |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- At what speed does a tsunami travel over water 1000 m deep?
- On which side of a groyne does sand accumulate?
- In which estuary type is salinity nearly uniform from surface to bottom?
Answers
- About 99 m s\(^{-1}\): \( \sqrt{9.81\times 1000} \).
- The updrift side.
- Well-mixed (vertically homogeneous) estuary.
Level 2: Part B Style
Practice Q1. A tsunami of amplitude 0.4 m in 3000 m of water travels onto a straight coast without change of width. Its amplitude at 5 m depth, by Green’s law, is about:
(a) 0.8 m (b) 1.2 m (c) 2.0 m (d) 4.9 m
Answer: (c) 2.0 m
\( A_2 = 0.4\times(3000/5)^{1/4} = 0.4\times 600^{0.25} = 0.4\times 4.95 = 1.98 \) m.
Practice Q2. If the breaking wave height doubles with the breaking angle unchanged, the CERC formula predicts that littoral transport increases by a factor of about:
(a) 2 (b) 4 (c) 5.7 (d) 8
Answer: (c) 5.7
\( Q\propto H_b^{5/2} \): \( 2^{2.5} = 5.66 \).
Practice Q3. An estuary with weak tides and very large river discharge, showing a sharp halocline and sea water penetrating landward along the bed, is a:
(a) well-mixed estuary (b) salt-wedge estuary (c) inverse estuary (d) bar-built lagoon with no stratification
Answer: (b)
River-dominated, highly stratified, with a landward-pointing wedge of saline water.
Practice Q4. For a beach with breaking height 1.5 m, period 10 s and sediment fall velocity 0.02 m s\(^{-1}\), the beach state is most likely:
(a) reflective (b) intermediate (c) dissipative (d) cannot be judged without tidal range
Answer: (c) dissipative
\( \Omega = H_b/(w_s T) = 1.5/(0.02\times 10) = 7.5 \), above about 6. (Tidal range does modify beach state, but the standard first-order classification uses \( \Omega \).)
Level 3: Part C Style
Practice Q5. A partially mixed estuary has river discharge 400 m\(^3\) s\(^{-1}\). At the mouth, the surface outflow salinity is 28 and the bottom inflow salinity 34. Which statements are correct?
- The bottom inflow is about 1870 m\(^3\) s\(^{-1}\).
- The surface outflow is about 2270 m\(^3\) s\(^{-1}\).
- If the river discharge doubled with the same salinities, both flows would double.
- The ratio \( Q_{out}/R \) is independent of \( R \) for fixed salinities.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2, 3 and 4 (d) 3 and 4 only
Answer: (c) all four
\( Q_{in} = 400\times 28/6 = 1867 \) m\(^3\) s\(^{-1}\); \( Q_{out} = 400\times 34/6 = 2267 \) m\(^3\) s\(^{-1}\). Both are proportional to \( R \) for fixed \( S_{in} \) and \( S_{out} \), so 3 and 4 hold. (In reality, a larger \( R \) would also change the salinities.)
Practice Q6. In an estuary, dissolved silicate is measured along the salinity gradient. The river end-member (S = 0) has 150 µmol L\(^{-1}\) and the sea end-member (S = 35) has 10 µmol L\(^{-1}\). At S = 14 the measured value is 80 µmol L\(^{-1}\). Which statements are correct?
- Conservative mixing would give 94 µmol L\(^{-1}\) at S = 14.
- The observation indicates removal of silicate within the estuary.
- Diatom uptake is a plausible cause.
- The observation indicates addition of silicate from desorption.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3
Fraction of sea water at S = 14: \( 14/35 = 0.4 \). Conservative value \( = 0.6\times 150 + 0.4\times 10 = 90 + 4 = 94 \) µmol L\(^{-1}\) (1). The measured 80 is below the line: removal (2), consistent with uptake by diatoms (3). Statement 4 describes points above the line. Wrong.
Practice Q7. An earthquake occurs 1500 km from a coast across an ocean of uniform depth 3000 m. A tide gauge at the coast records the first wave. Which statements are correct?
- The first wave arrives about 2.4 h after the earthquake.
- A 20-minute-period wave in this ocean has a wavelength of about 200 km.
- Halving the depth would increase the travel time by about 41%.
- The tsunami would be invisible to a ship in mid-ocean because it is a deep-water wave there.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3
- \( c = \sqrt{9.81\times 3000} = 171.6 \) m s\(^{-1}\); \( t = 1.5\times 10^6/171.6 = 8740 \) s = 2.43 h. Correct.
- \( L = cT = 171.6\times 1200 = 206 \) km. Correct.
- \( t\propto h^{-1/2} \): \( \sqrt{2} = 1.414 \). Correct.
- The ship does not notice it because its amplitude is small and its wavelength enormous, not because it is a deep-water wave; it is a shallow-water wave everywhere. Wrong.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Shoaling | \( K_s = \sqrt{c_{g0}/c_g} \) |
| Refraction | \( \sin\theta/c = \) const; \( K_r = \sqrt{\cos\theta_0/\cos\theta} \) |
| Breaking | \( H_b \approx 0.78h_b \); spilling, plunging, surging by Iribarren number |
| Longshore current | \( V \approx 1.17\sqrt{gH_b}\sin\alpha_b\cos\alpha_b \) |
| Littoral transport | \( Q\propto H_b^{5/2}\sin 2\alpha_b \); max at 45° |
| Indian east coast | net drift northward |
| Beach state | \( \Omega = H_b/(w_sT) \): < 1 reflective, > 6 dissipative |
| Bruun rule | \( R = SL_*/(B + h_*) \) |
| Storm surge | 1 cm per hPa; wind set-up \( \propto \tau L/(\rho gh) \) |
| Tsunami speed | \( \sqrt{gh} \); 198 m s\(^{-1}\) at 4000 m |
| Green’s law | \( A\propto h^{-1/4}b^{-1/2} \) |
| Seiche | \( 2L/(n\sqrt{gh}) \) closed; \( 4L/\sqrt{gh} \) open at one end |
| Estuary types | salt-wedge, partially mixed, well-mixed, fjord, inverse |
| Knudsen | \( Q_{in} = RS_{out}/(S_{in} - S_{out}) \), \( Q_{out} = RS_{in}/(S_{in} - S_{out}) \) |
| Flushing | \( V_f/R \); tidal prism \( (V + P)/P \) cycles |
| ETM | null point of bottom residual flow; flocculation |
| Mixing diagram | below line removal, above line addition |
Key Takeaways
What’s Next
- Physical Oceanography: Quick Revision: the whole chapter on one page.
- T-S Diagrams, Mixing and Water Masses to revisit conservative mixing.
- Natural Hazards for the hazard-management side of tsunamis and surges.
- Back to the Physical Oceanography overview.