Skip to content

Plate Tectonics and Geodynamics Short Notes

One-page CSIR NET Geophysics revision: magnetic anomalies, ridges, Euler poles, boundary seismicity, heat flow models, mantle convection and plumes.

  • 7 min read
  • Updated
On this page · 7 sections
  1. Part C in one table
  2. Constants used throughout
  3. 1. Marine magnetic anomalies, spreading and ridges
  4. 2. Kinematics and boundary seismicity
  5. 3. Heat flow and thermal modelling
  6. 4. Mantle convection and plumes
  7. Last-minute checklist

Every formula, value and trap from Marine Magnetic Anomalies, Sea-Floor Spreading and Ridges, Plate Boundaries, Kinematics and Seismicity, Heat Flow and Thermal Modelling and Mantle Convection and Plumes, on one page.

Part C in one table

Per the NTA information bulletin for December 2026, Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702):

PartGivenAttemptCorrectWrongMaximum
B5035+2−0.570
C8025+4−1.32100

Part C’s penalty is 33% of the marks for a correct answer, against 25% in Parts A and B. Only the first 25 Part C answers are evaluated.

Constants used throughout

QuantityValue
Earth radius \( R \)6,371 km
1 Myr\( 3.156\times 10^{13} \) s
1 km Myr\(^{-1}\)1 mm yr\(^{-1}\) = 0.1 cm yr\(^{-1}\)
Thermal diffusivity \( \kappa \)about \( 10^{-6} \) m\(^2\) s\(^{-1}\)
Thermal expansivity \( \alpha \)about \( 3\times 10^{-5} \) K\(^{-1}\)
Conductivity \( k \)about 2–3 (crust), 3–4 (mantle) W m\(^{-1}\) K\(^{-1}\)
Upper-mantle viscosityabout \( 10^{21} \) Pa s
Rigidity \( \mu \) (for moments)about \( 3\times 10^{10} \) Pa

1. Marine magnetic anomalies, spreading and ridges

  • Source: layer 2A extrusives (TRM in titanomagnetite, high \( Q \)); amplitude falls with age as titanomagnetite oxidises to titanomaghemite.
  • Oceanic crust: layer 1 sediment; 2A lavas; 2B sheeted dykes; 3 gabbro; total about 6–7 km.
$$\boxed{w = u\,\Delta t} \qquad \boxed{\text{amplitude}\propto e^{-2\pi z/\lambda}} \qquad \boxed{\tan I' = \frac{\tan I}{\cos(D - A)}}$$
Setting (normal block)Anomaly
Magnetic polesymmetric peak
Equator, E–W strikesymmetric low
Equator, N–S strikenone (magnetisation ∥ strike)
Elsewhereskewed; reduce to pole
  • Sequences: C1–C34 (younger than the Cretaceous Normal Superchron, about 121–84 Ma); M0 and older (Mesozoic); Jurassic Quiet Zone beyond.
  • Half rate \( = \Delta x/\Delta t \) per flank; full rate = sum of flanks.
$$\boxed{d \approx 2500 + 350\sqrt{t}\ \text{m}} \quad (t \text{ in Myr, to about 70 Myr})$$
Age (Myr)416364964
Depth (m)3,2003,9004,6004,9505,300
Slow ridgeFast ridge
Axisrift valleyaxial high
Magmaepisodic, no steady chambersteady magma lens about 1–2 km deep
Offsetstransforms, oblique jogstransforms, overlapping spreading centres
Specialcore complexes, detachmentssmooth flanks

2. Kinematics and boundary seismicity

$$\boxed{v = \omega R\sin\Delta} \qquad \boxed{\cos\Delta = \sin\lambda_p\sin\lambda + \cos\lambda_p\cos\lambda\cos(\phi - \phi_p)}$$$$\boxed{{}_A\boldsymbol{\omega}_C = {}_A\boldsymbol{\omega}_B + {}_B\boldsymbol{\omega}_C}$$
  • \( \omega \) in rad: 1° Myr\(^{-1}\) gives \( \omega R = 111 \) km Myr\(^{-1}\) = 11.1 cm yr\(^{-1}\) at 90°.
  • Transforms and slip vectors on small circles; perpendiculars to transforms meet at the pole; rates vary as \( \sin\Delta \).
  • Finite rotations do not commute; angular velocities add.
  • Triple junctions: loci in the velocity triangle must meet at one point. RRR always stable; FFF never.
SettingEarthquakes
Ridgeshallow normal; T ⊥ ridge; bigger at slow ridges
Transformshallow strike-slip; plane ∥ transform; much aseismic slip
Outer risenormal (bending)
Megathrustlow-angle thrust; largest events (1960 Chile, 2004 Sumatra–Andaman, 2011 Tohoku)
Slabto about 700 km; hanging slab down-dip extension, resisted slab down-dip compression
Collisionwide belt: frontal thrusts, normal faults on the plateau, strike-slip
$$\boxed{\Phi = t\,v\sin\delta} \qquad \boxed{M_0 = \mu LW\,c\,vt} \qquad \boxed{M_w = \tfrac{2}{3}(\log_{10}M_0 - 9.1)}$$
  • Arc above slab at about 100 km depth; \( \tan\delta = \Delta z/\Delta x \).
  • Deep-quake mechanisms: dehydration embrittlement (intermediate); transformational faulting (deep).
  • Halving \( M_0 \) lowers \( M_w \) by 0.2.
  • India: Himalaya (1897, 1905, 1934, 1950, 2015), Andaman–Sumatra (2004), Owen Fracture Zone, Carlsberg Ridge, diffuse Central Indian Ocean boundary, intraplate Koyna, Latur, Jabalpur, Bhuj.

3. Heat flow and thermal modelling

$$\boxed{q = k\frac{dT}{dz}} \qquad \boxed{\kappa = \frac{k}{\rho c_p}} \qquad \boxed{\tau\sim\frac{L^2}{\kappa}} \qquad \boxed{Pe = \frac{vL}{\kappa}}$$
Global value
Continents / oceans / meanabout 65 / 100 / 87 mW m\(^{-2}\)
Total heat lossabout 44–47 TW, two-thirds through oceans
  • Bullard plot: \( T = T_0 + qR \), \( R = \sum\Delta z_i/k_i \).
  • Uniform \( A \): \( T = T_0 + q_0z/k - Az^2/2k \).
$$\boxed{q_0 = q_r + A_0D} \qquad \boxed{T = T_0 + \frac{q_r z}{k} + \frac{A_0D^2}{k}\left(1 - e^{-z/D}\right)}$$

Half-space cooling:

$$\boxed{\frac{T - T_0}{T_m - T_0} = \operatorname{erf}\frac{z}{2\sqrt{\kappa t}}} \qquad \boxed{q = \frac{k\Delta T}{\sqrt{\pi\kappa t}}} \qquad \boxed{z_L\approx 2.32\sqrt{\kappa t}} \qquad \boxed{w = \frac{2\rho_m\alpha\Delta T}{\rho_m - \rho_w}\sqrt{\frac{\kappa t}{\pi}}}$$

With \( k = 3.3 \), \( \Delta T = 1300 \) K: \( q\approx 430/\sqrt{t} \) mW m\(^{-2}\); \( w\approx 355\sqrt{t} \) m; \( z_L \) about 65 km at 25 Myr, 105 km at 64 Myr.

  • Misfits: young floor, hydrothermal heat deficit; old floor (beyond about 70 Myr), flattening → plate model.
  • Ridge push \( \approx g\rho_m\alpha\Delta T\kappa t \approx 4\times 10^{12} \) N m\(^{-1}\) at 100 Myr.
  • Skin depth \( \delta = \sqrt{\kappa P/\pi} \): day 0.17 m, year 3.2 m, 100 kyr about 1 km.
  • Dyke cooling about \( b^2/\kappa \); Kelvin \( t = \Delta T^2/\pi\kappa G^2 \).

4. Mantle convection and plumes

$$\boxed{Ra = \frac{\rho g\alpha\Delta T d^3}{\kappa\eta}} \qquad \boxed{\frac{\delta}{d}\sim\left(\frac{Ra_c}{Ra}\right)^{1/3}} \qquad \boxed{\tau_M = \frac{\eta}{\mu}}$$
NumberMantle
\( Ra \)about \( 10^6 \)–\( 10^8 \)
\( Ra_c \)657.5 (free–free), 1,100.65 (rigid–free), 1,707.8 (rigid–rigid)
\( Pr \)about \( 10^{23} \) (infinite)
\( Re \)about \( 10^{-20} \)
Maxwell timeabout 450 yr for \( 10^{21} \) Pa s
  • Lithosphere = top thermal boundary layer; D″ = bottom one. Urey ratio below 1.
  • Whole-mantle convection, with slabs stalling at 660 km in places and chemical piles (LLSVPs under Africa and the Pacific; ULVZs) at the base.
$$\boxed{\Delta z = \frac{\gamma\,\Delta T}{\rho g}}$$
410 km660 km
Reactionolivine → wadsleyiteringwoodite → bridgmanite + ferropericlase
Clapeyron slopepositivenegative
In cold slabshallowerdeeper
Effectaids sinkingresists sinking
$$\boxed{v_s = \frac{2\Delta\rho g a^2}{9\eta}} \qquad \boxed{B = (\rho_m - \rho_w)Sv} \qquad \boxed{H = \frac{c_p}{\alpha}B}$$
  • Plume: head → uplift + LIP; tail → age-progressive track; excess temperature about 100–300 °C; high \( ^3\text{He}/^4\text{He} \) in some.
  • India: Réunion (Deccan, Chagos–Laccadive), Kerguelen (Rajmahal, Ninetyeast).
  • Plume heat flux is a small fraction of global heat loss.
  • Forces: slab pull (about \( 10^{13} \) N m\(^{-1}\)) > ridge push (about \( 10^{12} \) N m\(^{-1}\)).

Last-minute checklist

Back to the Plate Tectonics and Geodynamics overview or the Earth Sciences overview.

Advertisement
Advertisement